11 best infrared remote repeaters

• STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
• COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
• SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
• RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
• EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

User questions & answers

Question:	Is this compatible with a tcl riki tv
Answer:	I am assuming you mean a TCL Roku TV correct? I just purchased this for mine and it works like a charm. With one caveat, if you power it with the USB from the TV, you have to manually turn the TV on to activate power to the USB. If you power it will and external USB power supply you will be able to turn the TV on and off. Also keep in mind the TV's IR receiver is on the bottom of the screen in the middle in a whitish plastic area below the screen.
Question:	Does the transmitter portion need to be directly over the device to be controlled, or can it be a few feet away in line of sight
Answer:	As long as in line of sight.
Question:	Which is the receiver and which is the emitter?? One is larger than the other
Answer:	The picture depicts from left to right the receiver, the emitter and the USB. The receiver is the larger one.
Question:	Where exactly do you put the emitter on the cable box? Only the volume and power are working on the remote
Answer:	I reviewed this item as junk; the emitter being the issue. You need to look through (use a flash lite) the (usually red) cover on the cable box and find its emitter. You then need to place the "all in one' emitter DIRECTLY over it. Good luck getting it to work.

Product description

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!

Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!

How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25’) of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!

Kit includes:

1 Distribution block

1 IR Receiver (5’ long tip to tip)

4 Dual head IR emitters for up to 8 devices (Cables are 8.5’ long)

1 Power adapter

Manual

Link to a setup video

1 Year Manufacturer Warranty

Specs

IR receiver cord is 5' long - receiving range up to 25’

Emitter cables are 8.5’ long – emitting range 2-4”

Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable

Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting

Distribution block can be powered by a USB printer cable (NOT included)

Expandable to 3 IR receivers & 6 emitter cables

*IMPORTANT* PLASMA TV’S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

• BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
• IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
• COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
• CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

User questions & answers

Question:	I currently require two remotes to control all my audio/TV equipment. I cannot get them all onto one master remote. Do I need two systems
Answer:	No you do not need two systems. This unit simply relays IR signal(s) sent from any remote to your devices hidden away. You stick one of the four IR blasters coming out of the unit on the IR eye of each of your devices and the IR receiver on the edge of your TV. Then you point any remote at TV and press button. The signal will leave your remote to the IR receiver and through the cord the unit. From there the unit will replay the signal to all 4 IR blasters that are placed on the IR eyes of your devices (STB, DVD, AV Receiver, etc...)
Question:	This item can work with my logitech harmony one remote
Answer:	Yes. The way this system is designed it will basically pick up any remote using IR technology, which is what the Logitech remote uses. Cheers!
Question:	Can anyone say with certainty this WILL work with directv dvr and directv genie plus other components? Seems there are several conflicting opinions
Answer:	I have this BAFX Repeater, and I also have the DTV HR54-700 satellite box. The repeater does NOT work at ALL with this satellite box. The IR signals come from my Philips Pronto TSU7000 - AND the repeater works FINE with all other connected devices Such as my Sharp Aquos TV, the LED Bias Lighting module on the back of that, a Denon receiver, RCA receiver, and a Philips DVD player The Pronto works intermittently with the satellite box by itself - as long as it is NOT too close to the satellite box As soon as I put the BAFX emitter over the IR receiver window - - IR stops working. I've put up to 6 layers of painters tape over the window - - NOTHING. And Yes - - I have verified (watching with a digital camera: NOT an iPhone) - the emitter sends an IR signal when the BAFX system receives one. - SO - - My thoughts: DTV may be using a different IR light wavelength than what is transmitted by the BAFX. The question of course is - - WHY would DTV do that ?? Answer is ea$y to figure out. It's $o you can't u$e an all-in-one remote - - you have to RENT one of their$
Question:	What is the length of the receiver cable
Answer:	The receiver cable length is about 5 feet. You can buy a CAT5 extender setup which allows you to go much further here: https://www.amazon.com/dp/B016VEFI00/ref=cm_sw_em_r_mt_dp_U_GsokEbPHY5B42

Product features

How the IR Repeater Kit works

The setup is very is simple.



You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes. From this block, you will run the provided IR receiver cable (or the eye of the kit) from the distribution block and place it in a location where you can point the remote control at, this may be on the bezel of the TV, on a shelf ledge, the wall or other such locations. You will need to place this IR receiver no further than 30' from where you will be using the remote control.



Now, plug one of the emitter cables into the distribution block and run that cable to where you have your devices being controlled located. You will place one emitter head from this cable over the IR receiver on the devices being controlled.



Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Compaitibility

Many people wonder if our kit is compatible with a particular device.



Our repeater kit will work with all IR controlled AV devices. This includes but is not limited to devices such as: Logitech, Uverse, Onkyo, Sony, Pioneer, Yamaha, Cisco, Scientific Atlanta, Marantz, Denon, LG, Philips, Verizon Fios, Roku, Charter, Dish Network, DirecTV, Epson & More!



Should you have any troubles getting the BAFX Products IR repeater kit to work with these or any other IR controlled devices the BAFX Products Support team will be more than happy to assist you!



Important note: The repeater kit will NOT work with RF or Bluetooth remote controls

 

Kit Includes

• 1 Distribution block

• 1 IR Receiver cable

• 4 Dual head IR emitters for up to 8 devices

• 1 Power adapter

• Manual

• Link to a setup video



Specs



• IR receiver cable is 5' long tip to tip

• Emitter cables are approximately 8.5' long

• Distribution block measures 1.9" x 4.3" x 0.87"

• Has slots on sides for mounting

• Expandable for more 2 more emitter cables & 2 more receivers

• Dual band compatibility

• Distribution block can be powered by USB printer cable & wall adapter (not included)

• Emitters & Receiver may be extended using standard STEREO headphone extension cables

 

Additional Important Notes

Plugging directly into IR ports on devices: On some devices you may notice IR in/out ports. You MAY be able to use a Male to Male cable to connect our kit with such devices. We cannot promise that this will always work. It will depend on whether the device manufacturer has wired their port the same was as our kit and also handles the signal in the same manner. We have verified that many Onkyo & Denon devices do work with this but cannot make promises as to this.



Plasma TV's: Plasma TV's emit stray infrared signals. In some rare cases these stray signals may interfere with operation of the kit. In such cases simply moving the IR receiver slightly further from the TV will resolve this issue. LED & LCD TVs do not have this problem.



Extending via CAT5 lines: For this we offer a prepackaged CAT5 adapter kit that may be purchased separately. The parts may also be obtained individually on their own as needed.

• IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
• Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
• Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
• Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote

User questions & answers

Question:	Will this work with newest Spectrum Arris device
Answer:	It works with my new Arris DCX3510M HD DVR box. However the IR reception range is only 7-8 ft max. And you will need a separate USB power supply because the Arris USB ports only work when the box is on.
Question:	How close does the IR emitter need to be to the device receiving the signal
Answer:	The smallest one needs to be right on point to work. You will need a second person to help while you adjust and they try the remote.
Question:	Does it have to be Synced to the remote
Answer:	No. This is a simple device that simply passes on the infrared signal. Whatever the remote shoots into this device's receiver will be transmitted to the other end. It took only minutes to set this up. We put cable box behind the TV screen. Attached the receiver end to the underside of the TV, near current remote sensor just so it is the same target area you are used to, the other end of the extender gets aimed at the cable box on the other side. The cable box has USB so that was used for the power. Amazing product
Question:	What does 10feet mean
Answer:	Means 10 feet long from starting to end.

Product features

Remote Control Solution

The Cable Matters Infrared Extender Cable is the perfect solution for controlling a Blu-ray player, CATV box or another video source from your TV. Use your TV remote even when a soundbar is blocking access to the IR sensor. Connect to home theater components that are concealed in a cabinet or nearby closet.

Important Notes

• Test the cable before attaching with the adhesive backing
• Check that the USB TV port provides 5V USB power or use a USB wall charger
• Not compatible with a set-top box using (RF) radio frequency signals
• Bright sunlight or CFL light bulbs can cause interference

USB Power Boost

• Power with a 1-amp USB wall charger
• USB Y-cable length = 6 Feet

IR Compatibility

• 30-60 KHz receiving frequency
• CFL bulbs or bright light can cause interference

Lightweight Extender Cable

• Flexible wire is easy to secure
• Coil any excess wire with a cable tie

Product description

The *ALL NEW* BAFX Products Wireless IR Repeater Kit / remote control extender! Complete your A/V setup with ease! This handy little kit allows you to hide all your IR controlled A/V equipment behind closed doors, or in another room all together, while still being able to control them with your current IR remote controls! (Does not support RF only remote controls, such as some Roku players)

Rather than sending the IR signal via cables & wires like our standard IR repeater kits, these kits repeat your IR commands wirelessly!

With our brand new wireless kit, there is no need to run a wire from the IR receiver end of your setup to where the devices are located. Simply plug the IR receiver end in the room where you want to control your devices from and plug the emitter end into an outlet near the devices you are trying to control and then attach one emitter head to each device! Simple as that! No more messy wires to run through walls or floors!

IMPORTANT:

More than one wireless kit may be used per home however, if you have two devices that both can be controlled with the same remote control, please be aware that if they are both connected to the repeater kit, they will BOTH respond to the commands coming from the repeater kit!

Comes with a fenominal and easy to use 1 Year warranty against manufacturing defects from BAFX Products

Specs:

Transmitting distance 50-300ft (walls/floors will reduce distance)

Generally suitable for homes 3-5,000SQFT or less depending on home construction

Distance of IR receiver from remote control, up to 25'

5V power

What's included:

2X IR Receiver

1X Quad head emitter cable

2X Power wall adapter

1X Transmitter block

1X Receiver block

Link to setup video

Manual

1 Year manufacturer warranty against defects

(Please note, this IR repeater kit will only send remote control IR signals, you will still need to run a line for you actual A/V signals)

• Hide your IR remote controlled devices completely out of sight! In another room, in the cabinet or wherever you can imagine!
• Does your remote control stop working if your cable box is 20' away but you want to put the cable box downstairs? Not a problem with our wireless remote control extender!
• Suitable for most homes 3-5,000 SQFT or less. Our wireless IR extender can span 50-300ft, depending on your homes contstruction which can reduce the distance it may span.
• Sit and change channels on the cable box while the box is in the basement and your upstairs.
• Simple to follow setup video, helpful technical support and an awesome, 1 Year manufacturer warranty from BAFX Products!

User questions & answers

Question:	Does this work with direct tv mini genie
Answer:	It should work with any IR device.
Question:	Can you cover up the red light or will it affect signal? The red light is really distracting
Answer:	If your referring to the red light on the IR receiver, the little black thing that catches the signal from your remote and is stuck to the front of your TV, don’t put anything in front of it. It will block the signal. You can buy another one that has no red light. Just a clear plastic receiver that lights up when you press a button on the remote.
Question:	Is there a longer antenna available? I have two walls in between the cable box and tv and the signal is very weak or doesn’t work most of the time
Answer:	Hi there, I am with BAFX Products. A long antenna is not available however assuming that these are standard construction walls, the kit should be able to pass through them without issue. Please contact us directly so that we can assist further and help figure this out with you! We look forward to hearing from you! Regards, BAFX Products
Question:	What is the rf frequency of the device? i need to homologate, can you provide the rf specs
Answer:	Hi there, I am with BAFX Products. The kit operates on 433.92MHz If there is anything else we can help with, please do let us know. Best regards, BAFX Products

Product description

1. IR Repeater Kit comes with 1 receiver and 5 dual emitters that could be able to control up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System.

2. IR Repeater System allows you to control A/V equipment with your existing IR remote controller, such as: receiver, amplifier, TV, home theatre system, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.

3. Plasma displays emit IR frequencies during use and may cause interference.

4. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1.

5. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference.

6. CFL friendly: this unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.

7. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent.



Package Content:



1x Distribution block

1x Power plug

1x IR Receiver (Length: 5 Ft)

5x Dual IR Emitters (Length: 10 Ft)

1x Manual

• Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices
• IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc
• IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet
• High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments
• Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference

User questions & answers

Question:	when it is receiving an ir signal from the hand-held TV remote? Does remote sensor have a led to indicate
Answer:	Yes, everything was fine and very fast. Whenever it detects an IR signal from any source then the indicator is blink.
Question:	What is length of this receiver cable
Answer:	The length of receiver cable is 5ft
Question:	Is there an extension available for the receiver module? 5' isn't long enough for my setup
Answer:	I have used these for years where the receiver may not be right at the cabinet or closet location. I normally extend the cable using an shielded 2 conductor cable. I have also used non shielded with no issues, but i believe the included cable has a shield. I have not tested the length it would be good for, but i have gone at least 50' this way.
Question:	Does this product work with the sony str-dn1050 receiver
Answer:	It works with any device that uses an IR remote.

Product description

SZBJ IR Repeater，IR Remote Control Extender，Infrared Repeater System (3 dual head ir emitter)

• Devices compatiable : Tested to work with amplifier, cable box, stereo receiver,game console, Satellite TV receiver, CD player, DVD player, Blu-ray player and other streamers as well as most A/V devices, Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• Devices concontroled:you can control up to 6 infrared devices - Expandable to 12 devices(Additional IR emitters sold separately)with the included IR Receiver.
• High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor.
• Out of sight :small main block & pure copper wire to transfer signal up to 200 meters,so you can place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control.
• package includes: 1- Distribution box; 1-IR Receiver; 3-Dual head IR Emitters ; 1-12v DC 500 MA power plug and 1-User Manual.

User questions & answers

Question:	Can i contol 1 roku wth two remotes in separate rooms
Answer:	Thank you for your interest in our liners. Yes, these fit a 2010 Honda Pilot. Please let us know if you have any other questions. Thanks AutoMatStore
Question:	I want to buy this, but what if the remote control distance is short/The remote control signal is not sensitive enough，what should I do
Answer:	Thank you for your interest in our liners. This Cargo liner fits from behind the 2nd row and Back:http://www.amazon.com/dp/B01BX99TGMPlease let us know if you have any other questions. Thanks AutoMatStore
Question:	Will this work with dish dvr and denon avr
Answer:	Fairly glossy were not slick
Question:	What are the lengths of the receiver and emitter cables
Answer:	Yes, It does.

Product features

Easy to install !

Stick the Emitter exactly on the receiver window of the appliancs.

Note : one emitter for one AV equipment, do not try to stick 2 emitters on the receiver window, otherwise, it will Interfere with each other.

Emitter cable is detachable

As the emitter cable is detachable, you can stick the emitter on different equipments easily.

Use with at most 3 receivers

Control up to 6 infrared devices (Expandable to 12 devices) from one location with the included 1 IR Receive (Expandable to 3 receivers to control devices from 3 different rooms).

Can be used in multiple scenarios

Product description

Multizone: Protect from Interference Most IR extenders are programmed to pass any signal that is sent through the receiver. Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup. This has been a requested feature from many of our customers as they have extended IR signals but unintentionally were controlling two devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. Now with the BlastIR Wireless Multizone you are able to ensure you will only control the box that is attached to one of your TVs and not the other. The Channel IR System The Multizone feature works on a 10-channel system, this system gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfereing with one another. The system also gives you the option of using any number of transmitters or receivers on any given channel. This gives you complete freedom of choice for where your displays and devices can be placed without having to complicate your setup. The BlastIR Wireless Multizone Receivers will only communicate with the BlastIR Wireless Multizone Emitters that are set to the same channel. If you happen to own the classic BlastIR Wireless, this product will also work with it. Channel 0 on this product will allow IR signals to be sent between the two diffferent versions.

• NOTE Some devices us RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices.
• 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another
• Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet
• Known compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M
• Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!

User questions & answers

Question:	I can't figure out where the connections (V+/G/ST/IR) go from the wall receiver to the main unit (+12VDC/GND/Status/Signal) - help pls
Answer:	They connect from from the receiver to the main unit via standard telephone cable (CAT3) not supplied. V+ is +12VDC, G is GND(or the minus side of the power supply), ST is the status LED and IR is the signal.
Question:	Does this work with FIOS 7xxx HD DVRs
Answer:	It works perfect with va comcast DVR. So I magazine other DVRs will work. You'll have to find the right spots to place the 2 sensors for best performance. The only device that the infrared device doesn't work well with is an older Sony reciever I have hooked up. I only get volume control with this.
Question:	What is the maximun length of cable that the BlastIR can support? Will it reach over 150ft Cat5e cable to send it's repeated signal
Answer:	Yes.
Question:	can I operate 2 televisions off of 1 cable box
Answer:	I have a TV and cable box in my man cave and HDMI ran overhead to a TV in adjoining exercise room. I have an HDMI splitter in the man cave. I want to simply be able to use the cable remote from the man cave TV to change channels from the exercise room, going through one wall. I'll just take the remote to whichever room I'm in. Do I need anything else other than this item. I couldn't ask all this in the questions, maybe someone will see this answer, sounds similar. I'm already operating 2 TVs off a single cable box with a splitter but want to use the remote in both rooms.

Product features

Multi-Zone Control

The BlastIR Wireless Pro supports up to 10 zones with independent sending/receiving frequencies. (kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone. You can also purchase extra Emitters, or Receivers individually if you do not need an extra full pair.

All-to-All

The BlastIR Wireless Pro can be set to send the signal from All Receivers To All emitters by setting all the units to the same "Channel" or "Zone"

Zone-To-Zone

The BlastIR Wireless Pro can be set to only send the Signal from one Receiver to specific emitters.

Troubleshooting and Support

Troubleshooting: If you're having trouble setting up your BlastIR PRO, it is very easy to troubleshoot. The videos on Sewelldirect will show you how easy it is to set up and troubleshot your BlastIR.

Please Note : This product is NOT Compatible with the Yamaha HTR 6140, Arris DCX 3520E-M, or the OSD ATM-7 Speaker Selector.

Product description

SZBJ IR Repeater，IR Remote Control Extender，Infrared Repeater System (4 dual head ir emitter)

• Devices compatiable : Tested to work with amplifier, cable box, stereo receiver,game console, Satellite TV receiver, CD player, DVD player, Blu-ray player and other streamers as well as most A/V devices, Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• Devices concontroled:you can control up to 8 infrared devices - Expandable to 12 devices(Additional IR emitters sold separately)with the included IR Receiver.
• High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor.
• Out of sight :small main block & pure copper wire to transfer signal up to 200 meters,so you can place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control.
• package includes: 1- Distribution box; 1-IR Receiver; 4-Dual head IR Emitters ; 1-12v DC 500 MA power plug and 1-User Manual.

User questions & answers

Question:	my tv and receiver is only 10 feet from my cable remote, only switches channel (sometimes) when im off axis. Anyway to make this work in small room
Answer:	My vehicle is pilot 2010 this item fit exactly for front seats and second seats No gaps showen on the sides , I think it is fit also for 2015 pilot , it is very good material and exellant functional performing.
Question:	why does it have two heads on the ir emitters
Answer:	I used to have the exact Honda and it fits perfectly, hope this helps.
Question:	Does the IR receiver LED stay lit when its not picking up a signal? I have one that stays lit in green all the time and flashes red when sensing IR
Answer:	Yes, we do offer the mats to be sold as induvial.

Product features

Easy to install !

Stick the Emitter exactly on the receiver window of the appliancs.

Note : one emitter for one AV equipment, do not try to stick 2 emitters on the receiver window, otherwise, it will Interfere with each other.

Emitter cable is detachable

As the emitter cable is detachable, you can stick the emitter on different equipments easily.

Use with at most 3 receivers

Control up to 8 infrared devices (Expandable to 12 devices) from one location with the included 1 IR Receive (Expandable to 3 receivers to control devices from 3 different rooms).

Can be used in multiple scenarios

Product description

Is your living room cluttered with random A/V devices everywhere because they must be within the line of sight of the remote control in order for you to use them?

Are you tired of having to leave the doors on your TV cabinet open every time you find yourself watching television?

Do you want to move your devices into another room, a closet or the basement but still be able to control them with your remote control?

Remote Control Solution



The Supxing Infrared Extender Cable is the perfect solution for controlling a Blu-ray player, CATV box or another video source from your HDTV. Install where a soundbar that is blocking access to the HDTV IR sensor. Connect to home theater components that are concealed in a cabinet or nearby closet.



Important Notes

- Test the cable before attaching with the adhesive backing

- Check that the USB TV port provides 5V USB power or use a wall adapter

- Not compatible with set-top boxes using (RF) radio frequency signals

- Plasma TVs or CFL light bulbs can cause interference



IR Receiver for Hand-Held Remote

- Place in a convenient location near the display

- Transmits IR signal up to 15 feet from the handheld remote

- 180 degree operating range for receiving the signal

- LED flashes when a signal is received

Supxing usb ir repeater features:

*Power with a 1A USB wall charger

*20-60 KHz receiving frequency

* Flexible wire is easy to secure

• {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV; Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ)
• {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor; Route the cable out of sight with a wall mounted HDTV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
• {SIMPLE INSTALLATION} of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
• {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them
• {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF); 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay

User questions & answers

Question:	My Tvs IR receiver is blocked by sound bar will this work to move it is a better place to read remote
Answer:	Yes. It works very well. I use mine to control a set of speakers behind where I normally sit. Just used this to place the RF sensor in front of and it worked perfectly.
Question:	How do you configure the placement of the smaller end of the repeater near the cable box? Where should the adhesive be placed? This doesnt work
Answer:	Typically you are able to see where the IR sensor of the cable box is by shining a flashlight around the front panel of the box. The sensor window should appear different in color. Also it should round abouthe size of a dime or smaller. Stick the small end on that window, flat side down. Make sure the USB port that you are connected to is always powered. Or use a USB power supply. You aim your remote to the large end. That should work. If does not try using it on another device like a DVD player. If that doesn't work then you have a defective extender. Return it to Amazon and ask for another one. Hope this helps. I had no trouble.
Question:	Does everyone else have a green light showing it has power
Answer:	We have no green light. Only red light on larger receiver module which is on all the time. Works great!
Question:	Will this work with a TV cable box
Answer:	Yes! I have a Comcast Xfinity X1 DVR connected to it and for my Apple TV in the same area, they both work perfect.

• ✅ High sensitivity: Remote control signal receiving real-time response to fast forward without delay
• ✅ Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
• ✅ Easy Setup: This IR Repeater System is easy to use and sets up in minutes
• ✅ 5V USB Power Supply(Adapter not included)
• ✅ Control Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls

Product description

SZBJ IR Repeater，IR Remote Control Extender，Infrared Repeater System (2 dual head ir emitter)

• Devices compatiable : Tested to work with amplifier, cable box, stereo receiver,game console, Satellite TV receiver, CD player, DVD player, Blu-ray player and other streamers as well as most A/V devices, Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• Devices concontroled:you can control up to 8 infrared devices - Expandable to 12 devices(Additional IR emitters sold separately)with the included IR Receiver.
• High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor.
• Out of sight :small main block & pure copper wire to transfer signal up to 200 meters,so you can place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control.
• package includes: 1- Distribution box; 1-IR Receiver; 2-Dual head IR Emitters for 4 A/V devices can be chosen; 1-12v DC 500 MA power plug and 1-User Manual.

User questions & answers

Question:	My spectrum remote will turn the volume up and down but will not change the channel indicator light on repeater flashes when volume up and down but wi
Answer:	since this is for portion control for weight loss, never do heaping, only level with the top of the ring.
Question:	Can I place the receiver behind an acoustically transparent projection screen
Answer:	The book explains everything quite well and it provides visuals of the foods and how they should look. My guess is the food can be level with the top of the ring but that, I'm not too sure-maybe someone else can clarify on this point
Question:	Can the receiver wire be extended 50-75 ft
Answer:	My order only came with the meal portion gadget. No books were included. Sorry.
Question:	How long are the emitter cables
Answer:	PortionMate™ is a set of six color-coded cylinders with volumes from largest diameter to smallest diameter, 1 cup (Green), 3 ounce (Red), 3/4 cup (Yellow), 1/2 cup (Orange), 1/3 cup (Blue), and 1 ounce (Purple)

Product features

Easy to install !

Stick the Emitter exactly on the receiver window of the appliancs.

Note : one emitter for one AV equipment, do not try to stick 2 emitters on the receiver window, otherwise, it will Interfere with each other.

Emitter cable is detachable

As the emitter cable is detachable, you can stick the emitter on different equipments easily.

Use with at most 3 receivers

Control up to 4 infrared devices (Expandable to 12 devices) from one location with the included 1 IR Receive (Expandable to 3 receivers).

Can be used in multiple scenarios