14 best fpv goggles

Product description

* FPV System

VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)

Channels: 37CH incl. Race band

Camera: RunCam Nano 2 1/3" 700TVL CMOS

Smart Audio Connected

* Includes

1x Tinyhawk II FPV Racing Drone

1x EMAX Transporter 5.8G FPV Goggles

1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging

1x EMAX E6 Transmitter

1x EMAX 450mAh 1S HV Battery

1x EMAX 300mAh 2S HV Battery

2x CCW + 2x CW Spare Props

1x 1S-2S USB LiPo Charger

1x Screwdriver + Hardware Kit

1x Micro USB Charging Cable

1x Faux Carbon Fiber Carrying Case

* For the included 2S Lipo, please only charge via the larger balance connector only on the stock charger, and have it set to the Lipo position. Do not plug any non-1S LiPo batteries into the PH2.0 connectors on the charger, even if it fits (e.g. the 2S LiPo of the TinyHawk S). The 2S LiPo and charger may become damaged.

RECOMMENDED FOR CHILDREN 14+ YEARS OF AGE

• Great for beginners
• Durable FPV Drone
• Comes with controller and goggles
• Experience real life FPV

User questions & answers

Question:	Can i wear the goggles with my glasses on
Answer:	Depends on the glasses I suppose. I use the FatShark HDO 2 and don’t need to wear my glasses with them. I’m nearsighted so that may be different from you.
Question:	Do the goggles record the flight of the drone
Answer:	No, the rtf goggles do not record
Question:	Is there free returns
Answer:	Yes

• Low latency 1024x600 Display, with ‘no blackout/ blue screen’ If video signal gets low
• Adjustable lens focus – Focal distance can be adjusted with simple dial on bottom of unit
• Dual diversity receivers – automatic switching to antenna/ receiver with best reception for outstanding range. Also features auto Scanning function for fast and easy Channel searching!
• Supports AV and HDMI source DVR (HDMI DVR maximum input resolution supported is 1920*1080P @ 60Hz)
• Ntsc/PAL mode Auto switching – no need to worry about what mode camera you are using, the viewoptixhd Auto-recognize the format and displays the image properly!

User questions & answers

Question:	Is this the same as the headplay se v
Answer:	I believe so. I have v1 actual HeadPlay brand here: https://www.rcgroups.com/forums/showthread.php?3384257-HeadPlay-Box-Goggles-and-Stuff-lol
Question:	Will these work with the 2 cell li ion pack that fat shark uses on thier goggles
Answer:	Dear Avrey, Sorry for the late reply because of the weekend here.The power input of our headplay goggles is 6-24V,if the voltage of 2 cell li ion pack that fat shark uses on thier goggles IS DURING 6-24V,Yes,it can use.Hope this can help you. Freely-by sales team
Question:	Is a battery included and how long is the battery life
Answer:	Dear Ryan, Nice day. It doesn't include a battery ,however, a 3S racing battery can be supported . Sincerely, Flysight Service Team
Question:	Does this head set work with the dji Mavic mini
Answer:	No. The Mavic Mini works on a 5g wifi signal from your cell phone or tablet through a downloadable app. This is analog radio, it's a different signal.

Product features

Flysight ViewOptix HD Goggle - HDMI/DVR

The new ViewOptixHD720 FPV Headset is packed full of features that every FPV enthusiast will enjoy. The functions and design of this headset are improved a lot and licensed officially from HeadPlay goggles,which was designed from the ground up with the FPV pilot in mind, with quality, performance and comfort at the forefront.

The headset gently rests on the forehead/cheeks spreading the weight out evenly, which compared to many video goggles which rest on the bridge of the nose instead.

Flysight ViewOptix HD 5.8GHZ Google with HDMI and AV DVR

The new ViewOptixHD headset with NO Latency 1024x600 Display, with no “Blackout” or “Blue Screen” if video signal gets low.Dual diversity receivers – Automatic switching to Antenna / Receiver with best reception for outstanding range.Adjustable Lens Focus – Focal distance can be adjusted with simple dial on bottom of unit. Also features auto scanning function for fast and easy channel searching!Support AV and HDMI In – Use with an external receiver for long range, or simply enjoy a movie or playing a video game on your own private giant screen!Support AV and HDMI source DVR (HDMI DVR maximum input resolution supported is 1920*1080P @ 60HZ). NTSC/PAL mode Auto Switching – No need to worry about what mode camera you are using, the ViewOptixHD auto-recognizes the format and displays the image properly!Includes Standard 5.5mm Barrel Type connector, and Extensions for use with XT60 and Barrel type Power connectors.

The FPV Goggles use Patented Features for its Adjustable lens Design, Heat Dissipation Structure, and Overall Appearance

LCD

• Resolution 1024x600 – 7” Diagonal
• Contrast 700:1 / Brightness 350-380 cd/m2
• Lens Focus Distance 50mm – 80mm (Adjustable)

Wireless RF System

• Frequency: 5.685ghz-5.945ghz (ISM Band)
• 40 Channel/Bands: A,B (Boscam),E,F (Fatshark),R (Raceband)
• Diversity Type: Receiver / Antenna diversity Switching
• DVR – Supports up to 128GB USB / SD Card Drive (FAT32 File System), 10 MB/s Recording Rate MPEG Compression 60FPS

HDMI Input

• Supports up to 1920x1080P 60HZ (HDMI 1.4a)

I recommend this fpv goggles !

The new ViewOptixHD720 FPV Headset is packed full of features that every FPV enthusiast will enjoy. The functions and design of this headset are improved a lot and licensed officially from HeadPlay goggles,which was designed from the ground up with the FPV pilot in mind, with quality, performance and comfort at the forefront. The headset gently rests on the forehead/cheeks spreading the weight out evenly, which compared to many video goggles which rest on the bridge of the nose instead. Three straps securely hold the ViewOptixHD in place while at the same time blocking light coming in from the outside. The end result is a cinematic experience that is sure to impress.

Product description

The Scout is the newest Fat Shark product. It is the culmination of years of work to design a high-performance google at an entry level price. The Scout uses a patented panel goggle optical module to deliver a 50 degree field of view (FOV), 1136 x 640 resolution and a 60 fps refresh rate in a comfortable to wear headset. In addition to an impressive display, the Scout has completely overhauled electronics performance. It has a diversity RX with an embedded 10 dB patch antenna to maximize reception, a new OSD, an updated DVR, and simple USB charging. The Scout also has several user conveniences including an embedded fan, removable foam to allow for pilots to wear glasses while flying and an LED indicator on the antenna to provide channel notification. The Scout is the headset for aspiring pilots looking for premium performance at a great value.

• Include:
• 1x Fat Shark Scout FPV Goggles
• 1x ImmersionRC SpiroNET 5.8GHz SMA Antenna
• 1x 5G8 Patch Antenna (built-in headset)
• 1x 18650 2600mAh Battery(built-in headset)

User questions & answers

Question:	Does this fat shark come with a carrying case
Answer:	Yes it comes in a black case. Good padding on the inside.
Question:	can you do fpv with a win with those googles
Answer:	Sorry, I do not know what you mean "with a win"
Question:	Do they work on mavic pro
Answer:	No. You need DJI goggles to work with the Mavic
Question:	Will these work on mavic pro
Answer:	No. DJI has their own protocol for their video feed you will need DJI goggles for them.

Product description

This is an upgraded version goggles (Updated on 2020.01.01)

Main Features:

Small size and light weight.

Low power consumption, Working current 360~400mA.

Double antenna reception to make the signal more stable.

RaceBand 40 channel, Auto-Searching.

3.0 Inch 480*320 dot high brightness LCD screen.

Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand.

Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery.

Universal USB charging interface.

Real-time video return, Very low time-delay.

Support external video signal input.

Support AV signal output (Connect external DVR).

Specification:

Screen size: 3.0 Inch

Resolution: 480*320

Display Ratio: 16:9

View Angle: 6 o'clock

Brightness: 350cd/m² with high brightness backlight LED

Video delay: video time-delay less than 20ms

Lens: 4X Fresnel Lens, 92% transparent rate no distort of light

Antenna: 2 X RP-SMA male

USB Port: To charge the battery

AV Jack: External video signals input or internals AV signal output

Languages: English and Chinese

Power adapter: DC5V/1A (USB interface)

Battery: 3.7V/1200mAh,Each full charge revive around 2.5hr working time

Power Consumption:

*The device operating current of 360~400mA at 3.7~4.2V

*Built-in battery maximum charge current of 500mA

Dimension: 13.5cm * 13.2cm * 6.5cm

Weight: 183g(with headband, not included antennas)

• Small size and light weight, only 183g, easy to carry and more comfortable to wear.
• Double antenna reception to make the signal more stable.
• Built-in 3.7V/1200mAh high-capacity Li-ion polymer battery, and the longer time to enjoy your flying.
• Built-in super sensitiveness 5.8GHz 40ch receiver, especially with raceband. It’s more convenient, easier and faster under auto-searching.
• Real-time video return, Very low time-delay.

User questions & answers

Question:	Can i put a better antenna on these? also, does it have a dvr
Answer:	Yes,you put a better antenna on this 5.8Ghz FPV Goggles, and it have the DVR.
Question:	will this work with a mavic pro
Answer:	It can't work with a mavic pro.
Question:	A male sma is non standard. did it come with a male-female adapter
Answer:	Mine have rp-sma. No adapter just two chopsticks
Question:	Will goggles work with the dji spark
Answer:	No, they are incompatible.They have different frequencies.

Product description

Goggles

• Performance: High definition, low latency, and highly immersive, with long-distance transmission capabilities
• Battery: Battery in the box supports up to 110 minutes of flight when fully charged
• In the Box: DJI FPV Goggles V2 (including the foam padding) ×1, DJI FPV Goggles Battery ×1, DJI FPV Goggles Power Cable (USB-C) ×1, DJI FPV Goggles Antenna (Dual Band) ×4, Headband ×1, USB-C Cable ×1, Sleeve ×1

• iFlight fpv antenna,high quality material LHCP RP SMA antenna
• Cute and small 5.8g 3dBi antenna, fashion color, design for DJI digtal fpv goggles
• Works great on receiving video signal
• Pack list: 2pcs x LHCP rpsma Short Omni Antennas
• We always try to do better with best service, just feel free email us when you have any question

Product features

iFlight 2pcs LHCP RP SMA Short Omni FPV Antennas for DJI Digtal FPV Goggles

The perfect upgrade part for DJI Air Unit to avoid buying fragile stock antennas again and again...

Use RP-SMA LHCP (Left Hand Polarization) for DJI Digital FPV Goggles!

Default antennas are LHCP and Goggle Antennas are LHCP, both sides need to match!

Specifications:

Model: LHCP Short Omni Antennas

Frequency range: 5000-6000MHz

Gain: 3Dbi

cable：RG141

Axial Ratio: 0.7

Polarization: LHCP

SWR: ≤1.5 (ON 5.8GHz)

Package included:

2pcs x LHCP rpsma Short Omni Antennas

Note: Digtal Goggles and shell do not include!

Product description

The Recon line of panel goggles are a great entry level FPV headset. They are simple, affordable, and have an ultra-immersive FOV. The Recon V3 has an integrated four band, 32-channel receiver, and USB charging. It puts ease-of-use first and lets pilots focus on the full FPV experience without worrying about extra charging cables or accessory components.

Version 3 of the Recon Goggles is a very mature design. It has an included onboard DVR, uses an integrated channel scanner to pick up the strongest video feed and has an improved 800 x 480 TFT resolution display for a crisper image. The onboard OSD shows video signal strength, battery lifetime, and selected channel. The Recon V3 is the ideal choice for a new pilot looking for a complete, high-quality headset.

Specifications

Optics

• FOV (field of view): 55°
• Format: 16:9

Micro Display

• Display: WQVGA 4.3inch display
• Resolution : 800 X 480 TFT

Electrical

• DVR: analog video recording
• SD card support to 32GB (AVI file)
• Support playback recording file
• Firmware upgrade via SD card

Wireless Receiver

• 40 channels, single high sensitive receiver including RaceBand frequencies(auto scan and find strongest channel)

OSD

• channel info, RSSI info and battery status (disappear after 4s, press any button to show up)

Interfaces

• USB charge port
• Micro-SD card slot

Resources

Recon V3 Manual

Includes

• 1x Recon V3 Headset
• 1x 5.8G dipole antenna
• 1x 18650 2600mAh Li-ion Battery(built-in headset)

Warning: Exposing the lens to direct sunlight will result in LCD damage.

• FOV (field of view): 55°
• Format: 16:9
• Display: WQVGA 4.3inch display
• Resolution : 800 X 480 TFT
• DVR: analog video recording

User questions & answers

Question:	Does it work with echine 250 FPV
Answer:	Yes it will work with any 5.8 GHz system.
Question:	Does this come with head strap
Answer:	Yes
Question:	Can I wear corrective lens with these goggles
Answer:	Like contact lens? Sure. What I have found is that this goggle has the internal mirror system so even people with near/far eye sight problems usually don't have problems looking thru this goggle. I have old eyes and my eyes are about +1.25 and I am able to use these goggles without any problems. My kids loves this goggles as well.
Question:	Does this work with dji mavic pro
Answer:	this is an analog FPV goggles and it doesn't work with DJI digital video system.

Product description

Our all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then.

Prop protection is what we're talking about here...

ProTek is not necessarily just a Cinewhoop series but far more.

Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed,

do some freestyle or carry a full GoPro through tiny gaps.

Durable plastic protectors with copper standoffs, portable compact design, easy accessable USB port without disassembly,

LED battery status, lost model buzzer ,pack with TPU bottom stand for a full size protector of GoPro5/6/7/8/9 or nakedGoPro.

If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.



Features:

- No Props or frame in view!

- Caddx Vista Digital HD System

- High performance SucceX-D 20A Whoop F4 AIO Board to save weight and space

- T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

- Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

- Low Resonance frame construction (Less Jello, more Cinematic footage)

- Butter smooth XING 1404 5500KV motors

- Pre-tuned with smooth freestyle settings



ProTek25 BNF Specs:

- SucceX-D 20A Whoop AIO

- Wheelbase: 114mm

- Body Size: 91*68.7mm

- Propeller size: 2.5 inch

- FC pattern: 25.5*25.5mm / 20*20mmmm

- Weight: 194.3g (without battery)



Pack list:

pre-built and tested

- 1x ProTek25 HD Drone

- 2x Nazgul 2525 propeller (Set of 4 - Color May Vary)

- 2x iFlight Lipo Strap 15*200mm (Color May Vary)

- 1x TPU bottom stand for NakedGoPro Protector (NakedGoPro Protector not included)



Recommended but not inlcuded:

HD FPV Goggles for DJI

Radio Controller for DJI

Battery 4S 850mAh

• -iFlight ProTek25 HD FPV Cinewhoop Drone ,built with Caddx Vista Digital HD System for DJI FPV Goggles
• -2.5inch Cinewhoop fpv drone,compact design,with high durability light weight protective prop guard
• -We use bigger motors: xing 1404 5500kv motor,2.5inch cine 2525 propeller,more power and high efficiency
• -with LED power indicator,led tail light,lost model buzzer,easy accessable USB port without disassembly
• -2 kind of TPU bottom stand for mount nakedgopro or for full size protector case for gopro 6 7 8 9(camera and camera case not included). recommed battery: 850mah 4s (not included)

User questions & answers

Question:	Is the mavic 2 pro tx dji controller compatible
Answer:	dear buyer, only dji fpv remote controller can suit for it.

Product description

Mini FPV Goggles 5.8GHZ 3 Inch 40CH FPV Video Headset with Double RP-SMA Antenna and Handbag Built-in 1200mAh Battery for FPV Racing Drone Quadcopters(White)



Specification:

LCD Screen

Screen size: 3.0 Inch

Resolution:  480*320

Display Ratio: 16:9

View Angle:  6 o'clock

Brightness:  350cd/m² with high brightness backlight LED



Video delay:Video time-delay less than 20ms

Lens: 4X Fresnel Lens, 92% transparent rate no distort of light



Interface    

Antenna:2 X RP-SMA male

USB:To charge the battery

AV Jack:External video signals input or internals AV signal output



Power Supply

Power adapter:  DC5V/1A (USB interface)

Battery: 3.7V/1200mAh,Each full charge revive around 2.5hr working time

Power Consumption: 

*The device operating current of 300~330mA at 3.7~4.2V;

*Built-in battery maximum charge current of 500mA;



Dimension:  13.5cm * 13.2cm * 6.5cm

Weight: 200g



Package Including

1 * Mini FPV Goggle(White)

2 * RP-SMA Antenna

1 * Goggle USB Cable

1 * Audio Cable

1 * Manual

1 * Handbag

• Built-in super sensitiveness 5.8GHz 40ch receiver, especially with Race Band. Comes with advanced auto-searching function ad show the working frequency on screen.
• 5.8Ghz mini FPV racing goggles with double antennas, more stable signal . Built-in 3.7V/1200mAh high-capacity Li-ion polymer battery, offer you much more time to enjoy flying.
• Real-time video return 5.8G FPV receiver,low time delay(10 ms-20ms).
• Mini 3.0 inch(13.5*13.2*6.5cm) 480*320 dot high brightness LCD screen, small size and lightweight. It also comes with a carrying case, perfect for fly outdoor. Please confirm the size is suitable for you before take your order.
• Note: 1. These FPV Goggles were not designed for near-sighted or far-sighted user, please make sure to use after vision correction. 2. It is better to charge the FPV goggles when received , cause it might consume power during transportation.

Product description

5.8G FPV Antenna Circular Polarized Omni Cloud Spirit Tx Rx RPSMA for FPV Multicopter



This circular polarized omni antenna can be used both at VTx antenna andVRxantenna



Specification:

Frequency range: 5600-5950 MHz

Gain : 3DBi

SWR: andlt;1.5

3dB horizontal lobe width: 360°

3dB verticle lobe width: 120°

Max power: 50W

Resistance: 50Ω

Lightning protection: DC Grounded

Polarization: RHCP

Connector: RPSMA

Size: 105×35mm (feeder line 75mm）

Weight: 12g

Material: Cu

--------------------------------------------------------

Package Including

2 * 5.8G Circular Polarized Omni Antenna RPSMA

• Connector: RPSMA
• Gain: 3DBi,Frequency range: 5600-5950 MHz
• Material: Cu, Weight: 12g
• 5.8 GHz Circular Polarized Antenna Set for transmitter and receiver
• Omnidirectional: 3dB horizontal lobe width: 360°,3dB verticle lobe width: 120°

User questions & answers

Question:	Can I use both on my monitor at same time
Answer:	Yes, that will better.
Question:	Which one is tx and which is rx? need to know which goes to the receiver and to the transmitter
Answer:	This circular polarized omni antenna can be used both at VTx antenna and VRx antenna
Question:	Can i use this on husban x4 h501s quad copter and receiver
Answer:	You will need the ipex connection, but yes. Be sure to match male with female connections.
Question:	can the connecter be changed? I need a male and female connecter one male like this one for my reciever and one female for my transmitter, thanks
Answer:	Hi my friend,Yeah, it could be change. follwing is the link for your reference:https://www.amazon.com/Crazepony-Antenna-Connector-Adapter-Multicopter/dp/B01E4ZR842, you could change the connector like this.ThanksMakerfire Team

Product description

The Recon line of panel goggles are a great entry level FPV headset. They are simple, affordable, and have an ultra-immersive FOV. The Recon V3 has an integrated four band, 32-channel receiver and USB charging. It puts ease-of-use first and lets pilots focus on the full FPV experience without worrying about extra charging cables or accessory components.

Version 3 of the Recon Goggles is a very mature design. It has an included onboard DVR, uses an integrated channel scanner to pick up the strongest video feed and has an improved 800 x 480 TFT resolution display for a crisper image. The onboard OSD shows video signal strength, battery lifetime, and selected channel. The Recon V3 is the ideal choice for a new pilot looking for a high quality headset.

Includes:

-RECON V3 Headset

-5.8G dipole antenna

-18650 2600mAh Li-ion Battery(built-in headset)

-Fat Shark FPV Camera included(model FSV1254 with builtin 25mw video transmitter)

• Newest version Recon V3 with Onboard DVR(the MicroSD card not included)
• Ultra Micro FPV Camera with builtin 25mW VTX, 7 channels Fat Shark band
• Ready to Fly Out of the Box - Perfect kit for FPV RC Helicopter and Quadcopters
• INCLUDES: Headset, Camera, Cleaning Cloth, Linear Antenna, Headband, Battery

User questions & answers

Question:	Does it have everything needed
Answer:	Yes and no. The kit comes with goggles and a camera and an antenna. You’ll still need a power source to run the camera and perhaps an extension cord from power source to camera.
Question:	will this setup work on a fixed wing RC plane
Answer:	I bought the shark for that purpose
Question:	Does this include an antenna for the headset side
Answer:	Yes
Question:	Will this work with the Contixo F24 Pro
Answer:	Im not really sure if there compatible. Sry biddy

Product description

Main Features:

-With DVR,you can record videos anytime and anywhere;

- Low power consumption;

- Double antenna reception to make the signal more stable;

-Auto-Searching,support a key search frequency;

- Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;

- Built-in 3.7V/2000mAh battery, each full charge revive around 3.5hours working time for DVR OFF and 2.5 hours for DVR ON;

- Wide range re-charge voltage 5-12V, power banks or 2S/3S batteries can be used as back-up power source, to prolong the working time;

- Ergonomic design fit your faces;

- Super-wide visible angle up to 82 degree;

- 92% transparent lens adopted, no distort, no blur on the adage of screen;

- Light weight 375g with 3.5hr 2000mAh battery, RTF for any scale racing game.

- 5 inch 800*480px HD high brightness LCD screen

-Universal USB charging interference;

-Real-time video return,very low time-delay;

-Support external video signal input;

-Support Audio signal output;

Package Included:

1 X EV800D FPV DVR Goggles (Built-in 3.7V/2000mAh battery)

2 X RA-SMA Antenna

1 X USB charger

1 X User Manual

1 X Clean cloth

• The 2020 Version EV800D comes with DVR,you can record videos anytime and anywhere;
• Real-time video return,very low time-delay;
• Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
• Double antenna reception to make the signal more stable;
• 5 inch 800*480px HD high brightness LCD screen

User questions & answers

Question:	What type of antenna comes with these goggles
Answer:	It came with a basic twist on 4" antenna that says 5.8G. Sufficient but not long range.
Question:	Can i use this with my xbox
Answer:	It can set the same frequency between tx and rx that is OK.
Question:	will this work with phantom
Answer:	no it will not work with the phantom 3 or the phantom 4
Question:	If the quad has telemetry can you see it through the goggles
Answer:	Yes!!!You have to have an osd on your flight controller.https://youtu.be/Vpr4fKKTE0k