14 best monoprice in wall home theater speakers

Product description

This Kevlar in-wall speaker offers the perfect combination of performance and style. The use of aramid fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The titanium silk dome tweeter produces clean, crisp, and clear highs and mids.







You can fine tune the blend of sound using the built-in high frequency attenuator in case your room is too bright. The metal grille can be painted to match your ceiling. Easy to install with simple hand tools, less time working and more time relaxing.







All Caliber series in-wall and ceiling speakers are sonically matched to provide a uniform sound stage across you entire listening area. Simple two channel listening rooms to full screening rooms with 7.2.4 Atmos and DTS-X immersive cinema systems will benefit from the matched components of the Caliber series installation speakers.







Model: 6816

Frequency Response: 50 Hz ~ 20 kHz

Impedance: 8 ohms

Power Handling Capacity: 100 watts Nominal, 200 watts maximum

Woofer: 9"" Kevlar woven cone with 30 oz. magnet and rubber surround

Midbass: 3"" Kevlar woven cone with 5.4 oz. magnet and rubber surround

Tweeter: 1"" Silk Membrane dome

Sensitivity: 90dB ±2dB (1.0m/2.83V)

Crossover: 12dB per Octave (with -3dB, -6dB Switch)

Cut-Out Dimensions: 12.8"" x 8.7"" 3.6"" (324 x 222 x 91 mm)

Overall Dimensions: 14.1"" x 10.0"" x 3.9"" (357 x 255 x 100 mm)

• DuPont Kevlar fiber cone drivers delivery clean bass reproduction, This lightweight transducer is a natural sound with significantly less distortion than conventional drivers.
• Immerse yourself in airy detailed clarity with defined vocals and dialog from the pivoting titanium Silk dome tweeters of these installed speakers.
• Enjoy caliber speakers as main home theater speakers and whole home house systems or add as Surrounds and immersive sound sources.
• No logo grills add to the minimal look and increases the “wife acceptance factor”.
• Buy confidently with a 30-day money-back guarantee and our 1-year warranty.

User questions & answers

Question:	Are they Bluetooth
Answer:	No they are not Bluetooth.
Question:	does the 10" Subwoofer vibrate the walls and create any weird unwanted sounds
Answer:	I installed mine into new and properly fastened drywall and have no issues with rattling
Question:	my garage is unfinished (studs only) how much of an area do i need to enclose with drywall on the ceiling to make these sound good
Answer:	Most are designed for infinite baffle application. Meaning they do not need a box to sound good. However building boxes for them normally does help the sound
Question:	Will these speakers fit into a stud depth
Answer:	Yes they fit std 3. 1/2" stud depth

Product features

Caliber 8in Fiber In-Wall Speakers 3-Way (pair)

In-wall speakers allow you to expand your listening environment throughout your entire home, as well as removing the clutter of giant box speakers, giving you back your living space. In either case, it's a win-win situation for those who desire high fidelity and those who put emphasis on decor. Featuring a removable and paintable grille, the Caliber series of in-wall speakers are sonically matched to provide a uniform sound stage across your entire listening area. From simple two channel listening rooms to full home theater screening rooms with 7.2.4 Atmos or DTS:X immersive audio technology, your system will benefit from the matched components of the Caliber series speakers.

What's in the box

2x 8" 3-way in-wall speaker with grill, Installation instructions, Cutout template and paint mask, Grill removal tool, Grill putty.

Dupont Kevlar Fiber Cone Driver

Kevlar is very light, rigid, and strong and delivers clean bass reproduction. This lightweight transducer produces a natural sound with significantly less distortion than conventional drivers.

Titanium Silk Dome Tweeters

Titanium silk offers good projection with warm tones. Immerse yourself in airy, detailed clarity with defined vocals and dialog from the pivoting titanium silk dome tweeters of these speakers.

Versatile

Enjoy Caliber series speakers as main home theater speakers, for whole home sound systems, or add them as surrounds in immersive sound systems.

Product description

Aria In-Wall Speakers 6.5-inch Polypropylene 2-Way (pair)

• Long-throw 6.5in Poly+Mica woofer and 0.5in PEI tweeter make these mounted speakers sound full and articulate.
• Smooth installation thanks to paintable grills and baffles, precision cut-out templates, and easy flip-out inDog Earsin.
• Enjoy Aria speakers as main home theater speakers and whole home house systems or add as surrounds and immersive sound sources.
• No logo grill adds to the minimal look and increases the inWife Acceptance Factorin.
• Buy confidently with a 30-day money-back guarantee and our 1-year warranty.

User questions & answers

Question:	Does this subwoofer work outdoors? Weatherproof? It would not be directly in the weather and possible would not get wet but just wanting to be sure
Answer:	Yes
Question:	Would these work for left and right front speakers that are mounted horizontally
Answer:	The grid color is white.
Question:	what is the purpose of the thin black adhesive string supplied with the speaker? That is not described in the manual. Thanks
Answer:	Black
Question:	Can I just wire this to my receiver? Or does it need something else
Answer:	Yes, they are paintable .

Product description

This carbon fiber in-ceiling speaker is the perfect combination of performance and style. The use of carbon fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The silk dome tweeter produces clean, crisp, and clear highs and mids. You can fine tune the blend of sound using the built-in high frequency attenuator in case the sound is too bright. The metal grille can be painted to match your ceiling and attaches easily using magnets.



All Alpha series in-wall and ceiling speakers are sonically matched to provide a uniform sound stage across you entire listening area. Simple two channel listening rooms to full screening rooms with 7.2.4 Atmos and DTS-X immersive cinema systems will benefit from the matched components of the Alpha series carbon fiber installation speakers.

• Carbon Fiber drivers hit harder with deeper bass and handle more power significantly less distortion than conventional drivers.
• Immerse yourself in airy detailed clarity with defined vocals and dialog from 1” silk dome tweeters of these installed speakers.
• Enjoy Alpha speakers as main home theater speakers and whole home house systems or add as surrounds and immersive sound sources.
• No logo SlimFit Magnetic Grills add to the minimal look and increases the “Wife Acceptance Factor”.
• Buy confidently with a 30-day money-back guarantee and our 1-year warranty.

User questions & answers

Question:	is this sold as a pair or a single speaker
Answer:	No the speaker does not come with the mount brackets.
Question:	What is the mounting depth of this speaker
Answer:	The dimensions in there description are WRONG!!! They say the speaker size is (H x W x D) is 4. 21" X 10. 03" X 4. 92"... It's 5" in height, 4" deep and 10" wide!!! Sending it back!!!
Question:	Is it Dolby Atmos capable
Answer:	designed in the USA, made in China
Question:	For the 3-way carbon fiber 8" model, which drivers are aimable? tweeter? tweeter & mid? none
Answer:	No real point of comparison. This is a center channel speaker for a home theater system and the Angle 3 Plus is a wireless Bluetooth speaker meant for taking around and not being part of a surround system. If you get only 1, get the angle 3 because you won’t be able to do much with this unless you’ve got a receiver and the rest of the speakers for a surround setup

Product features

Monoprice Alpha In-Wall Speaker Center Channel Dual 5.25in Carbon Fiber 2-way (single)

The use of carbon fiber for the woofers means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The silk dome tweeter produces clean, crisp, and clear highs and mids. You can fine tune the blend of sound using the built-in high frequency attenuator in case the sound is too bright. The metal grille can be painted to match your walls and attaches easily using magnets.

Sound Quality

Sound Quality: Life is too short for speakers that don't sound great! We believe that the whole point of listening to music is to hear it as the artist intended. Our engineers and audio experts have spent countless hours listening to and comparing various speakers until we were satisfied we had found models that fit our demanding standards.

Style

Style: While Monoprice believes in function over form, there is nothing wrong with having speakers that look good, too. This in-wall speaker helps reduce clutter by getting your speakers off the floor or bookshelves, and the magnetic metal grille can be painted to match your wall, so it virtually disappears from view.

Simplicity

Simplicity: Installation is as easy as it can get. Use the included cutout template to mark your wall, make the cut, then using only a screwdriver, secure the speaker to the wall with the easy install mounting tabs.

Product description

The THX In Wall Speaker Series delivers the high level of accuracy and reproduce all the dynamics and detail of the best home theater soundtracks and music. Each speaker has been THX certified, ensuring optimal frequency response, dispersion, and low distortion. THX certification ensures that the sound from the speaker is as the audio engineer intended. The THX-365IW features premium drivers, THX certification, a sophisticated crossover network, and an HDF cabinet ensure that you've never experienced home theater sound that is this dynamic, detailed, or immersive from an in wall speaker.

• Premium drivers high excursion woofers. Silk dome midrange. Silk dome tweeter. Featuring carefully selected drivers that deliver a flat frequency response in the listening window, the THX-3651W features two 6. 5in woofers, a 2in silk dome midrange, and a 1in silk dome tweeter. The silk dome midrange operates in the 550Hz-1. 9kHz range, improving power handling, lowering distortion, and improving the polar response, which allows the speaker to achieve higher SPL.
• The 6. 5in high excursion Woofers feature a long fiber pulp cone, NBR Surround, and are designed with shorting rings to keep distortion at a minimum. The combined driver design enables the speaker to reach Sonic heights and deliver accurate sound For the best in home theater dynamics and detail
• Precision crossover network: The THX speaker series feature carefully selected fourth order Linkwitz-Riley crossover network acoustic filters. This sophisticated crossover minimizes sonic frequency overlap, reduces distortion, and is an excellent choice to minimize off axis response errors near the crossover frequency.
• Easy install: the heavy duty dog ear mounting system makes for a fast and problem free installation. The magnetically detachable grille is powder coated in white and can be painted to match any decor
• Timbre match: same drivers. Same soundscape. Lcr design. The Monolith THX Certified in wall and in room speakers utilize the same drivers and crossover components allowing speakers to be mixed and matched to suit your room! Utilize in wall speakers for the rears and in room speakers for the LCR, and you will remain timbre matched across the Monolith THX family

User questions & answers

Question:	What are the cutout dimensions
Answer:	They can be placed on the floor, a shelf or mounted to the wall or ceiling using proper equipment. -JM
Question:	Is this price for a single speaker or a pair
Answer:	Hello. The Power Supply information on the HT-S9800THX is: Power Supply AC 120 V~, 60 Hz. -DH

Product description

In-wall speakers are the ideal combination of sound quality and styling. Rather than cluttering the room with large box speakers trailing speaker wires, The speakers are virtually invisible, while filling the room with high fidelity audio. Featuring a removable and paintable grille, This 3-Way speaker uses a carbon fiber woofer cone with rubber surround for deep, impactful bass, A carbon fiber mid-range driver for tight, articulate midst, and a ribbon tweeter for sweeter and smoother high frequencies. ribbon tweeter: a ribbon tweeter is composed of a very thin metal diaphragm suspended in a powerful magnetic field. It is capable of very high acceleration, which means that it is very responsive to musical nuances. Ribbon tweeters have a wide horizontal dispersion and a very tight vertical dispersion, thereby increasing the size of the audio "sweet spot". carbon fiber drivers: Carbon fiber is a very lightweight and rigid material, making it ideal for speaker drivers. The lightweight ensures that the driver can respond quickly to musical nuances, while the additional rigidity results in improved accuracy and a flatter frequency response. The result is a is deep, impactful bass, and tight, articulate midst, without a hint of distortion. high frequency attenuator: the high-frequency attenuator can reduce high frequencies by 0, -3, or -6 db. This allows you to fine tune the speaker's high-end response to compensate for a particularly "bright" Listening environment. magnetic grille: The removable grille attaches to the speaker using powerful magnets, to ensure that the powerful bass does not cause Rattle. The grille is paintable and features a slim bezel, allowing it to more easily blend into your home's decor. higher Sensitivity, deeper bass, and higher power handling: Carbon fiber is a lighter and stiffer material than what is normally used in speaker drivers. This means that the drivers can respond quickly to musical nuances, are more accurate, and have a flatter frequency response. The result is deep, impactful bass and tight, articulate midst, without a hint of distortion. • 4. 5" X 3" Ribbon tweeter bull; 100 watts RMS, 200 watts maximum power handling capacity bull; 6. 5" Carbon Fiber bass and mid-range drivers bull; 56 Hz to 20 kHz frequency response• 8-ohms nominal impedance• removable and paintable grille• 89dB sensitivity• magnetic grille

• Sound QUALITY: life is too short for speakers that don't sound great! We believe that the whole point of listening to music is to hear it as the artist intended. Our engineers and Audio experts have spent countless hours listening to and comparing various speakers until we were satisfied we had found models that fit Our demanding standards.
• Style: while Monoprice believes in function over form, there is nothing wrong with having speakers that look good, too. These reduce clutter by getting your speakers off the floor or bookshelves, and the removable grille can be painted to match your walls, so it virtually disappears from view.
• Simplicity: installation is as easy as it can get. Use the included cutout template to mark your wall, make the cut, then using only a screwdriver, secure the speaker to the wall with the easy install mounting tabs.
• Carbon fiber woofers are lighter and stiffer than conventional materials used in speaker manufacturing. The speaker cone is more sensitive to power, which means that you get more volume using less power. Additionally, the stiffer material means deeper bass and higher power handling, with significantly less distortion.
• 150 watts RMS/300 watts peak power handling capacity. 10in Carbon fiber woofer with rubber surround. 33 230 Hz frequency response. Removable and paintable grille
• Connectivity technology: Auxilliary

User questions & answers

Question:	is this pair
Answer:	Ok
Question:	would this work as ceiling speaker ?? No matter any opinion, just asking about performance
Answer:	these tweeters are 4 ohms; the nominal power is 200W (constructor; measured with white noise meaning less with fixed frequency) . If you connect 2 in series (total of 4 for stereo) you should also connect the 2 caps in series. The max power for amplifier is then 400W @ 8 ohm. in series you have a safety for power transients (poks!!!) I recommend to do this wiring. Another possibility is connect them in // then you have a power of 400 W @ 2 ohm. In this case each should have its own cap in series. For cars this can be better as voltage at output can be lower and more power for amp at 2 ohm. If the amplifier is not designed (and cooled) for 2 ohm you will destroy the amplifier or have overheating) then connect them in series
Question:	What is the total Height and Width
Answer:	What kind of car you I have toyota lasso I install 3" in my door.
Question:	Are they Bluetooth
Answer:	The ones I received had the red middle

Product features

Amber In-Wall Speaker 6.5-inch 3-way Carbon Fiber Column with Ribbon Tweeter

Rather than cluttering the room with large box speakers trailing speaker wires, the speakers are virtually invisible, while filling the room with high fidelity audio. Featuring a removable and paintable grille, this 3-way speaker uses a carbon fiber woofer cone with rubber surround for deep, impactful bass, a carbon fiber mid-range driver for tight, articulate mids, and a ribbon tweeter for sweeter and smoother high frequencies.

Ribbon Tweeter

Ribbon Tweeter: A ribbon tweeter is composed of a very thin metal diaphragm suspended in a powerful magnetic field. It is capable of very high acceleration, which means that it is very responsive to musical nuances. Ribbon tweeters have a wide horizontal dispersion and a very tight vertical dispersion, thereby increasing the size of the audio 'sweet spot'.

Carbon Fiber Drivers

Carbon Fiber Drivers: Carbon fiber is a very lightweight and rigid material, making it ideal for speaker drivers. The lightweight ensures that the driver can respond quickly to musical nuances, while the additional rigidity results in improved accuracy and a flatter frequency response.

High Frequency Attenuator

High Frequency Attenuator: The high-frequency attenuator can reduce high frequencies by 0, -3, or -6 dB. This allows you to fine tune the speaker's high-end response to compensate for a particularly 'bright' listening.

Magnetic Grille

Magnetic Grille: The removable grille attaches to the speaker using powerful magnets, to ensure that the powerful bass does not cause rattle. The grille is paintable and features a slim bezel, allowing it to more easily blend into your home's decor.

Product description

"This Kevlar in-ceiling speaker offers the perfect combination of performance and style. The use of aramid fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The titanium silk dome tweeter produces clean, crisp, and clear highs and mids.



You can fine tune the blend of sound using the built-in high frequency attenuator in case your room is too bright. The metal grille can be painted to match your ceiling. Easy to install with simple hand tools, less time working and more time relaxing.



All Caliber series in-wall and ceiling speakers are sonically matched to provide a uniform sound stage across you entire listening area. Simple two channel listening rooms to full screening rooms with 7.2.4 Atmos and DTS-X immersive cinema systems will benefit from the matched components of the Caliber series installation speakers.

Model: 4102

Frequency Response: 68 Hz ~ 20 kHz

Impedance: 8 Ohms

Power Handling Capacity: 50 Watts Nominal, 100 Maximum

Woofer: 5.25"" Kevlar Woven Cone Woofer w/ 15.4oz Magnet and rubber surrounds

Tweeter: 3/4"" Titanium Silk Membrane Dome (Pivoting) 20° swivel

Voice Coil: 35mm K.S.V.

Sensitivity: 87dB ±2db (1.0m/2.83V)

Crossover: 12dB per Octave (with -3dB, -6dB Switch)

Cut-Out Dimensions: 6.9"" (175mm)

Overall Dimensions: 8.3"" (213mm)

Mounting Depth: 3"" (72mm)

Package Contents:

2x 5.25"" 2-way in-ceiling speaker w/ grill

1x Cutout template and paint mask

1x Installation instructions

1x Grill removal tool

1x Grill putty

• SNAP-LOCK MOUNTING TABS Reduce installation time with Snap Lock mounting tabs. Simply position your wired speaker in place and push in the mounting tabs to secure the speaker in place. It is really as easy as that! If changes need to be made, use any 6mm Allen wrench to disengage the Snap Lock.
• BUILT TO LAST High quality components and a robust crossover network ensure that your speakers will provide immersive sound for years. The 16AWG internal connecting wires deliver the audio signal to the drivers distortion free.
• CALIBER QUALITY Ease of use does not make a speaker great. We use the same high quality materials that have made our CaliberTM line of installed speakers best sellers for the last 10 years.
• MAGNETIC GRILLE The paintable magnetic grille adds to the ease of installation by eliminating the time and frustration of aligning grilles to pressure fit them in place. Just snap the magnetic grille in place or lift to remove. Simple!
• Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices

User questions & answers

Question:	this speakers will work with my leviton A00-1 sound system
Answer:	Its a speaker... So i suppose it would work with any sound system
Question:	Are these speakers suitable for outdoor use? (protected from weather, humidity is main concern
Answer:	Yes, I have them in the ceiling over my patio. Been great for 3 years amd Oklahoma is very Humid
Question:	I can use in microphone
Answer:	Yes, however a microphone has very low output volume. You will need to have a microphone mixer to equalize the microphone and music you are mixing together. For example, using a microphone with Karaoke.
Question:	Does the Monoprice speaker grill actually have the company name on it as shown in the picture? If so, will this cover if painted
Answer:	The speakers I received do no have any name/logo on the grill. I ordered two sets (at different times 6.5" & 8") and in both cases the grill were just plain white.

Product features

Monoprice Caliber In-Ceiling Speakers, 5.25in Fiber 2-Way (pair)

Featuring a removable and paintable grille, the Caliber series of in-ceiling speakers are sonically matched to provide a uniform sound stage across your entire listening area. From simple two channel listening rooms to full home theater screening rooms with 7.2.4 Atmos or DTS:X immersive audio technology, your system will benefit from the matched components of the Caliber series speakers.

Dupont Kevlar Fiber Cone Driver

Dupont Kevlar Fiber Cone Driver: Kevlar is very light, rigid, and strong and delivers clean bass reproduction. This lightweight transducer produces a natural sound with significantly less distortion.

Titanium Silk Dome Tweeters

Titanium Silk Dome Tweeters: Titanium silk offers good projection with warm tones. Immerse yourself in airy, detailed clarity with defined vocals and dialog from the pivoting titanium silk dome tweeters of these speakers.

Versatile

Versatile: Enjoy Caliber series speakers as main home theater speakers, for whole home sound systems, or add them as surrounds in immersive sound systems.

Product description

The THX In Wall Speaker Series delivers the high level of accuracy and reproduce all the dynamics and detail of the best home theater soundtracks and music. Each speaker has been THX certified, ensuring optimal frequency response, dispersion, and low distortion. THX certification ensures that the sound from the speaker is as the audio engineer intended. The THX-265IW features premium drivers, THX certification, a sophisticated crossover network, and an MDF baffle ensure that you've never experienced home theater sound that is this dynamic, detailed, or immersive from an in wall speaker.

• Premium drivers high excursion woofers. Silk dome midrange. Silk dome tweeter. Featuring carefully selected drivers that deliver a flat frequency response in the listening window, the THX-LCR features two 6. 5in woofers, a 2in silk dome midrange, and a 1in silk dome tweeter. The silk dome midrange operates in the 550Hz-1. 9kHz range, improving power handling, lowering distortion, and improving the polar response, which allows the speaker to achieve higher SPL.
• The 6. 5in high excursion Woofers feature a long fiber pulp cone, NBR Surround, and are designed with shorting rings to keep distortion at a minimum. The combined driver design enables the speaker to reach Sonic heights and deliver accurate sound For the best in home theater dynamics and detail
• The THX speaker series feature carefully selected fourth order Linkwitz-Riley crossover network acoustic filters. This sophisticated crossover minimizes sonic frequency overlap, reduces distortion, and is an excellent choice to minimize off axis response errors near the crossover frequency.
• The heavy duty dog ear mounting system makes for a fast and problem free installation. The magnetically detachable grille is powder coated in white and can be painted to match any decor
• Timbre match. Same drivers. Same soundscape. Lcr design. The Monolith THX Certified in wall and in room speakers utilize the same drivers and crossover components allowing speakers to be mixed and matched to suit your room. Utilize in wall speakers for the rears and in room speakers for the LCR, and you will remain timbre matched across the Monolith THX family

Product description

Connect your speakers using this easy-to-route, 16AWG pure copper flat speaker wire from Monoprice! This speaker wire comes in a flat package, which is easier to route in and around stereo equipment racks, corners, and other equipment than ordinary round speaker wire. It features cable markings on one of the two conductors and has an overall size of 12.4 x 2.0 mm. The PVC jacket is CL2 rated, making it safe for routing within and through the walls of residential class buildings.

• Lifetime warranty on all cables: with Monoprice lifetime warranty you can rest assured we stand behind our products and our customers.
• Features cable markings on one of the two conductors
• Speaker wire | comes in a flat jacket
• 16Awg pure copper flat speaker wire | from Monoprice
• Pure bare copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire.

User questions & answers

Question:	can this be shortened
Answer:	The rope can be painted. It might take a few coats depending on how the rope soaks up the paint.
Question:	is it really 12mm wide ? I’m trying to find some cable clips for it
Answer:	Mine came within days if you have Prime.
Question:	Is this wire truly copper or copper cladded
Answer:	I guess you could take it and try...the mirror it holds is very bad quality!!! It will probably cost more than the original!!!
Question:	What is the O D of this wire
Answer:	Hello, We recommend that our outdoor clocks be kept out of direct sunlight and out of the rain in order to keep them operable for as long as possible. If we can answer any more questions please reach out to our support team via live chat or email request on our website. Have an excellent day! Haylee AcuRite Support Team

Product description

In-wall and in-ceiling speakers are typically designed to blend into the room's decor. Remove the grille and all you can see is a boring yellow fiber or black Carbon woofer and silver dome tweeter that sticks out like a sore thumb. They sound great, but are either Invisible or detract from the look of the room. Monoprice's new line of sycamore architectural speakers are the exception. These classically designed white speakers have black accents, which subtly stand out without being an eyesore. Available in 2-way and 3-way configurations and in several different sizes, these speakers blend in with your room's look, with or without the grille installed. The grille attaches to the speaker using magnets, so installing or removing it is a snap.

• FORM FOLLOWS FUNCTION: Enjoy high-performance audio, ideal for music, distributed audio, and home theater installations. We've also refined the look underneath the grille over other in-wall/in-ceiling speakers for those who want to show off their high-performance speakers.
• MICRO CERAMIC COMPOSITE: Our MCC is an aluminum alloy with ceramic infusion. Micro-arc oxidation heats the aluminum base and produces a dense oxide on the metal surface. A micro-thin layer of ceramic is added to the alloy and is cooled. The result is our Micro Ceramic Composite that combines the stiffness and articulation of aluminum with the warmth and thickness of ceramic.
• KEEP IT SIMPLE: Tool-less magnetic grilles, spring-loaded 5-way binding post, and industry standard indog earin mounting tabs make installation a breeze.
• BUILT TO LAST: High quality components and a robust crossover network ensure that your speakers will provide immersive sound for years.16AWG internal connecting wires deliver the signal to the drivers, distortion-free.
• Service & Support : Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs

Product features

Sycamore by Monoprice Architectural In-Wall Speakers 6.5in 2-way Aluminum with Micro Ceramic Composite Tweeter (Pair)

Remove the grille and all you can see is a boring yellow fiber or black carbon woofer and silver dome tweeter that sticks out like a sore thumb. They sound great, but are either invisible or detract from the look of the room. Monoprice's new line of Sycamore Architectural Speakers are the exception. These classically designed white speakers have black accents, which subtly stand out without being an eyesore.

Product description

The THX In Wall Speaker Series delivers the high level of accuracy and reproduce all the dynamics and detail of the best home theater soundtracks and music. Each speaker has been THX certified, ensuring optimal frequency response, dispersion, and low distortion. THX certification ensures that the sound from the speaker is as the audio engineer intended. The THX-265IW features premium drivers, THX certification, a sophisticated crossover network, and an MDF baffle ensure that you've never experienced home theater sound that is this dynamic, detailed, or immersive from an in wall speaker.

• Premium drivers high excursion woofers. Silk dome midrange. Silk dome tweeter. Featuring carefully selected drivers that deliver a flat frequency response in the listening window, the THX-LCR features two 6. 5in woofers, a 2in silk dome midrange, and a 1in silk dome tweeter. The silk dome midrange operates in the 550Hz-1. 9kHz range, improving power handling, lowering distortion, and improving the polar response, which allows the speaker to achieve higher SPL.
• The 6. 5in high excursion Woofers feature a long fiber pulp cone, NBR Surround, and are designed with shorting rings to keep distortion at a minimum. The combined driver design enables the speaker to reach Sonic heights and deliver accurate sound For the best in home theater dynamics and detail
• Precision crossover network: The THX speaker series feature carefully selected fourth order Linkwitz-Riley crossover network acoustic filters. This sophisticated crossover minimizes sonic frequency overlap, reduces distortion, and is an excellent choice to minimize off axis response errors near the crossover frequency.
• Easy install: the heavy duty dog ear mounting system makes for a fast and problem free installation. The magnetically detachable grille is powder coated in white and can be painted to match any decor
• Timbre match. Same drivers. Same soundscape. Lcr design. The Monolith THX Certified in wall and in room speakers utilize the same drivers and crossover components allowing speakers to be mixed and matched to suit your room! Utilize in wall speakers for the rears and in room speakers for the LCR, and you will remain timbre matched across the Monolith THX family

Product description

With all of the ceiling speakers available what makes our Aria 2.1 system stand out? Simply put, it is their great sound and ease of installation. The Aria 2.1 system features an 8" passive subwoofer and a pair of 3" satellite speakers. Unlike other passive systems, where wires need to be run from the amplifier to each individual speaker, installation is simplified by running only a single speaker wire to the subwoofer, then shorter wires from the subwoofer to the individual satellite speakers. The subwoofer has a 12dB crossover that splits the audio signal so it uses only frequencies below 200Hz and sends all frequencies above 200Hz to the satellites. The system is designed to be powered by amplifiers with 50 to 200 watts of power, making it well-suited for most home theater audio systems. Need more bass? Add another subwoofer. Need more coverage for a large room? Add another pair of satellite speakers. It doesn't get any more simple than that.

• The MIT-1000s in-wall bridge speaker transforms your smaller 2-way in-wall or satellite speakers into full range monitors
• This compact non-powered sub is not for replacing a decent powered LFE subwoofer
• to bridge the frequency gap often found when trying to pair smaller speakers to a high powered subwoofer
• Buy with Confidence: Monoprice not only stands behind every product we sell with a 1 year replacement warranty, we offer a 30-day money back guarantee as well
• Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.

User questions & answers

Question:	did I need amp
Answer:	Yes, you will need an amp for this.
Question:	Can I use the speaker without the ceiling mount
Answer:	Yes. The speaker can be unscrewed from the ceiling mount, but I did not try this and there might be adhesive under the rim of the speaker to seal it.
Question:	How much depth is required for installation
Answer:	should have 5" at minimum. The speaker is just less than 1/4" shorter than that, and the speaker wires come straight out of the back.

Product features

Monoprice Aria Ceiling Speaker 8-inch Subwoofer with Dual Voice Coil (each)

The Aria 2.1 system features an 8" passive subwoofer and a pair of 3" satellite speakers. Unlike other passive systems, where wires need to be run from the amplifier to each individual speaker, installation is simplified by running only a single speaker wire to the subwoofer, then shorter wires from the subwoofer to the individual satellite speakers.

True 2.1 System

True 2.1 System: The subwoofer employs a 2-way, 12db crossover at 200Hz, so it uses all frequencies below 200Hz and sends all frequencies above 200Hz to the satellite speakers.

Slim Bezel

Slim Bezel: The slim bezel on the paintable speaker grill allows these speakers to more easily blend in with the ceiling, making for a system that's heard and not seen.

Easy Install

Easy Install: Rather than needing to run separate wires from the amplifier to each speaker, only a single, 4-conductor wire needs to run from the amp to the subwoofer, then a shorter pair of 2-conductor wires run from the sub to the satellites.

Modular

Modular: The system is designed to be extended by using additional subwoofers and/or satellite speakers. Need more bass? Add another subwoofer. Need more coverage for a large room? Add another pair of satellite speakers. It doesn't get any more simple than that.

• Easy Installation: The subwoofer includes easy-to-follow installation instructions. You can install it into almost any wall with at least 3.6in of space behind the wall.
• Aramid Fiber: The Aramid Fiber driver uses materials similar to what is used in DuPont Kevlar fiber products. The sturdy construction holds its form better than polymers, which minimizes distortion.
• 300W Peak Power: The 300 watt peak power capacity means that you can fill your room with deep, earth-shattering bass.
• Paintable Grill: The paintable grill allows you to match the color of your walls to make the speaker virtually invisible.
• Looks Good, Sounds Good: The combination of the low profile, in-wall design and the powerful subwoofer itself make for an excellent addition to a standard home theatre.

Product description

This carbon fiber in-ceiling speaker is the perfect combination of performance and style. The use of carbon fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The silk dome tweeter produces clean, crisp, and clear highs and midst you can fine tune the blend of sound using the built-in high frequency attenuator in case the sound is too bright. The metal grille can be painted to match your ceiling and attaches easily using magnets. All Alpha Series in-wall and ceiling speakers are sonically matched to provide a uniform sound stage across you entire listening area. Simple two channel listening rooms To full screening rooms with 7. 2. 4 Atoms and dots-x immersive cinema systems will benefit from the matched components of the Alpha series carbon Fiber installation speakers.

• Carbon fiber drivers hit harder with deeper bass and handle more power significantly less distortion than conventional drivers.
• Immerse yourself in airy detailed clarity with defined vocals and dialog from 1” silk dome tweeters of these installed speakers.
• Enjoy Alpha speakers as main home theater speakers and whole home house systems or add as Surrounds and immersive sound sources.
• No logo Slim Fit Magnetic Grills add to the minimal look and increases the “Wife Acceptance Factor”.
• Buy confidently with a 30-day money-back and our 1-year .

User questions & answers

Question:	What is cutout size and depth
Answer:	8.66" x 3.43" for 6.5. 10.67" x 3.90" for 8"
Question:	has anyone used these outside
Answer:	Those are not designed for outdoor use.
Question:	Can they be used as in ceiling LCR speakers
Answer:	Absolutely. That's how mine are installed. Sounds great
Question:	Can the tweeter be aimed
Answer:	The tweeter would have a fixed position.

Product features

Monoprice Alpha Ceiling Speakers 6.5in Carbon Fiber 2-way (pair)

The use of carbon fiber for the woofer means that the speaker can hit harder, go lower, and handle more power with significantly less distortion than conventional drivers. The silk dome tweeter produces clean, crisp, and clear highs and mids. You can fine tune the blend of sound using the built-in high frequency attenuator in case the sound is too bright. The metal grille can be painted to match your ceiling and attaches easily using magnets.

Sound Quality

Sound Quality: Life is too short for speakers that don't sound great! We believe that the whole point of listening to music is to hear it as the artist intended. Our engineers and audio experts have spent countless hours listening to and comparing various speakers until we were satisfied we had found models that fit our demanding standards.

Style

Style: While Monoprice believes in function over form, there is nothing wrong with having speakers that look good, too. This in-ceiling speaker helps reduce clutter by getting your speakers off the floor or bookshelves, and the magnetic metal grille can be painted to match your ceiling, so it virtually disappears from view.

Simplicity

Simplicity: Installation is as easy as it can get. Use the included cutout template to mark your ceiling, make the cut, then using only a screwdriver, secure the speaker to the ceiling with the easy install mounting tabs.

Product description

The mvr-100 is a rotary-type wall plate volume control for speaker systems with power ratings of up-inch 100 watts per channel and impedance ratings of 4-inch 16 ohms. This rotary control can be set-inch one of twelve positions including the minimum (off) and maximum volume settings. The wall plate mounts into a standard single-gang low-voltage wall bracket (not included) and has inputs and outputs for one pair of stereo speaker wires (4 input connections and 4 output connections). It can accept speaker wire in sizes from 14-inch 16 gauge and provides a frequency response range of 35 he-inch 20 kHz (+0/-2dB) at the full power rating of 100 watts per channel. Please note: this volume Control does not include a wall mounting bracket. Moonrise has everything you need-inch enhance your home theater system! You may also want-inch consider: low-voltage mounting brackets and wall-plate accessories in-wall speakers for a professional home theater looking-wall CL2 rated speaker wire

• The MVR-100 is a rotary-type wall plate volume control for speaker systems with power ratings of up-Inch 100 watts per channel and impedance ratings of 4-Inch 16 ohms
• This rotary control can be set-Inch one of twelve positions including the minimum (off) and maximum volume settings
• Please note: This volume control does not include a wall mounting bracket
• Wireless communication technology: IR;

User questions & answers

Question:	Will this volume support stereo volume control? 2 input / 2 output
Answer:	Hi, yes the volume is adjustable. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PVC1 for more details. Thank you.
Question:	I hooked up controller last night to one speaker on patio. Now internal speaker volume significantly reduced!? Any insight appreciated
Answer:	Bluetooth is wireless so it won't work. With this device you have to wire from a device like a stereo system to the "IN'' wires of this device. You then have 2 "OUT" wires that you have to wire to some speakers.
Question:	The volume controllers that I inherited do not have min and max stops. Does the dial on this one have a stop at max and a stop at min
Answer:	The real question is do you normally run them with 200 watts of power?? The control is spec,ed at 100 watts. But for home use even to the most hearing impaired user Most folks will not use more than 20 / 30 working watts of power though the speakers are rated for 200 watts that just means that that is the peak excursion they should be able to tolerate without a failure. What is your amp rated at How many watts?? Knowing this how hard do you run it at?? a 200 watt amp run at half volume should deliver approximately 100 watts output power. I have 250 watt speakers and a 60 watt amp and can barely tolerate them run to 50 % past that I risk hearing damage and a visit by the local constabularyMy speakers are really efficient. I am a believer that its not the power but the efficiency that rules. I do professional Sound reinforcement and rarely need to use more than 200 watts to the mids and that's to rock a crowd into the couple hundred. If you are truly using more than this consider building a more efficient system. My use of the volume control is to trim outdoor speakers rated at 50 w from an amp that outputs 25 watts
Question:	Can I run one pair of speaker wire from my receiver to this volume controller, then come out of the volume controller to 2 speakers
Answer:	Hi, you may use 2 speakers to this unit up to 100 Watts to the output port. Your amp will be connected to the input port at the back of the unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PVC2 for more details. Thank you.