Product description

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
• CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
• PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked

User questions & answers

Question:	I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible
Answer:	I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you.
Question:	Does this switch allow me to control sets of speakers independently
Answer:	I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp.
Question:	One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist
Answer:	Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier.
Question:	How do I hook this up to my 5.1 receiver
Answer:	The sound is great there is no distortion.

Product features

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• SOUND DISTRIBUTION: This speaker selector allows you to distribute an amplified audio signal to seven zones throughout the house, letting you choose between two music sources in each designated zone.
• POWER: Since this ATM-7 is a passive device with no built-in impedance protection, we recommend using our impedance matching in-wall volume controls so that the load doesn't affect your amp in a negative way.
• DESIGN: Multi-Zone Enable (2 In Working Mode), Zone In/Out Select, Dual Music Source A or B (2 In Mode) or output channels (7 In mode) located on the front, Master-Slave switch when connecting 2 ATM7 in parallel on the back.
• FEATURES: Perfect for your stereo needs, an IR Remote Controlled Front Panel Status LEDs for Power, Multi-zone, Master/Slave, Zone In/Out Select, In/Out Mode and Zone Out/In Selector and can be mounted/controlled in remote location.
• IR REMOTE: The ATM7 includes an IR remote control that has backup memory function and a 10-meter remote operating distance. Easily program the remote control of any of your favorite universal remote controls with the provided code.

User questions & answers

Question:	When the unit is power cycled, does it retain it's last setting for each speaker zone? Or does it default to either 'on' or 'off' for each zone
Answer:	Hello, looks like Amazon has the incorrect information for this item.Tripod weight: 5.88 lbs (2.67kg)Shipping weight: 8 lbs
Question:	Does the 7 zone with remote model maintain settings after the power is disconnected/reconnected
Answer:	If I remember correctly, this is a tripod only. Most folks who buy a good tripod like this have a specific head in mind, or, like me, already have one. I have a ball-head that works great. Really like this tripod.
Question:	What does 2x source mean? And does it come with wires to connect to the receiver
Answer:	Hello. Yes, so long as the slider you are using will accept either a 1/4"-20 or 3/8"-16 head mount thread then you should be able to use it with no problem. The only issue would be that with no head on the tripod - this item is for the tripod legs only - your capacity to change the orientation / level / etc of that slider is going to be limited. Please let us know if you have any additional questions. Have a great day!Deven MorganEvent Cameras
Question:	does this work with onkyo
Answer:	The 615317 also seems to cost $20 more.

Product features

OSD Audio 7-Zone Dual Source Speaker Selector

This 7-zone speaker selector allows you to control up to seven pairs of speakers so you can listen to music in multiple rooms simultaneously. The ATM-7 includes an IR remote control; with a backup memory function and a 10-meter remote operating distance, this may be the perfect solution for your needs. Also you can easily program the remote control to your favorite universal remote control.

• SOUND QUALITY: The audio stays at a consistent quality with the SSVC6D to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound.
• IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
• POWER: This speaker selector allows you to distribute an amplified signal for up to six zones throughout the house, letting you choose which source is playing in each designated zone.
• DESIGN: Front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons.
• EASY INSTALLATION: The SSVC6D includes a removable phoenix connectors that accept up to a 14 gauge speaker cable to avoid frustration when connecting multiple speakers.

User questions & answers

Question:	Can you tell me what the warranty is on this product
Answer:	This is just a simple switch - there are no delay elements in it. If you are experiencing echo, reverb, or feedback, the problem must be somewhere else in your setup.
Question:	Can I connect this to my receiver via bluetooth
Answer:	This won’t do what you’re trying to accomplish. This is a brilliant, yet simple, A/B switch. I use A for my PC audio out and B for my cell audio out to one set of headphones.
Question:	what is the maximum continuous amplifier power for which this product is compatible? The SSVC6 says 300W, but I can't find a spec for this one. THXS
Answer:	Short answer: Yes. Longer answer: You had me curious as to the answer, so I just hooked mine up the way you describe. I connected one PC going INTO the front headphones-out port, and another PC going INTO the speaker-out in the rear. Then I hooked up my speakers to INPUT B, and my headphones to INPUT A. That turned the A/B switch into an output selector and the front switch into an input selector. Everything worked fine, but for the completeness of the answer, I have to point out that the first time I connected things this way I got a 60Hz hum in my speakers, but disconnecting and reconnecting fixed that problem. I tested the speaker, volume, mic, and mute functionality, and they all worked well. Again, for the completeness of this answer, if I connect my Dell G7 laptop to a Type-C docking station (handling the audio, too), and the docking station connects to the Nobsound, and my headphones (with mic) are plugged into the Nobsound's headphones-out, then the laptop doesn't detect my headphones' mic. But that doesn't really bear on the answer you are looking for ( it's probably just a config I haven't sussed out yet); it's just something to be aware of.
Question:	What do I need to look for in a receiver to pair with this volume control selectors
Answer:	While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps.

Product features

Dual sourcec

The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.

Volume Control

Using the same technology as our in-wall volume controls, most units offer volume control per zone.

Impedance Protection

Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.

Easy to Install

Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.

OSD Audio 6-Zone Dual Source Speaker Selector

The SSVC6 speaker selector lets you add up to six speaker pairs around your house with individual volume controls for each speaker pair. Features removable input-output connector blocks for easy, yet secure wiring. Full impedance protection to protect your amplifier from low impedance when multiple speaker pairs are selected.

• ZONE CONTROL: This high power speaker selector is an effective way to distribute music to eight listening zones and includes individual on/off selectors for each zone and is constructed of 14-gauge steel.
• DESIGN: The ISS8 is a single source speaker distribution system with individual on/off selectors for each listening zone which distribute one stereo speaker-level signal from your amplifier across 8 zones.
• CONNECT: The phoenix connectors on the ISS8 are easily removable to avoid frustration when connecting multiple speakers. With screw-down terminals, the speaker wire cable will never come loose.
• IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
• EASY INSTALLATION: The low profile ISS8 is constructed of heavy-duty steel and allows easy access to the protection switch. The black brushed aluminum design easily fits into a cabinet or anywhere in the home.

User questions & answers

Question:	My Yamaha Receiver (750) has A and B speaker outputs. Would I connect the ISS4 inputs to the B outputs and then run 4 separate speaker pairs from the B side of the receiver leaving the A side for the main listening room speakers
Answer:	It really depends on the type of speaker configuration you have in your main zone. If you have a 5.1 environment in your main zone the best option is to connect the iss4's inputs to the zone 2 terminal on the back of your 750. This will allow you to listen to different sources in each zone at the same time. For instance you could watch a DVD in your main zone and in zone 2 you could be listening to an iPod or the fm tuner. Hope this answers your question, if you choose this option then remember you can only listen to analog sources in a zone 2 setup.
Question:	I can see how to select zones, how do you select the source? I have a phono amp and home theater amp I need to switch between, one set of speakers
Answer:	There is an round A/B button next to each rectangular zone button. Undepressed your are selecting source A. Press the button in and you are now selecting source B.
Question:	Can I run the 6 pairs of speakers at the same time? If this can be done, the volume drops
Answer:	Of course the volume drops. You will have 6 parallel circuits, each getting 1/6 the current. Basic rules of electricity.
Question:	I've bought this and I have connected it to 4 zones of in-wall speakers but the volume is extremely low! Do I need a receiver before the input
Answer:	What are you powering the speakers with?? In an ideal setup this device would be connected after the stereo amplifier or a/v receiver. It's is recommended to have an power source of at least 50W per channel supplying power to this volume selector. If you have impedance matching volume controls make sure the protection circuit button is in the off position(pushed out). If you have no volume controls push the circuit protection button in so that it equalizes the impedance.

Product features

Dual Source

The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.

Volume Control

Using the same technology as our in-wall volume controls, most units offer volume control per zone.

Impedance Protection

Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.

Easy to Install

Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.

OSD Audio 8-Zone Single Source Speaker Selector

The ISS8 high power speaker selector is an easy and effective way to distribute music to up to eight listening zones (eight pairs of speakers) and play any pair, a combination of pairs, or all pairs simultaneously. East to connect with a low-profile design that easily fits into a cabinet or equipment rack.

Product description

PyleHome Model : PSS8

8-Ch. Stereo Speaker Selector

8 Channel High Power Stereo Speaker Selector

Up To 8 Separate Speakers Pair To Your Stereo System.

Accepts Speaker Wires Up To 14-Gauge.

Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum Impedance Of 8 Ohms.

Protection Circuitry Keeps It Running Smoothly

Frequency Response: 20Hz-20KHz

Dimensions 12.8'' X 2.04'' X 6.12''

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
• CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
• PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
• Up To 8 Separate Speakers Pair To Your Stereo System
• Accepts Speaker Wires Up To 14-Gauge

User questions & answers

Question:	Does this unit have impedance matching transformer feature
Answer:	Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you.
Question:	I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device
Answer:	I think you will be fine, depending on how long your wire runs are.
Question:	Can you use it the opposite way....multiple recievers to one set of speakers
Answer:	No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera
Question:	How can it be both new and improved
Answer:	Increase connectivity range

Product features

Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR

The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.

PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE

The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.

PLUG AND PLAY EASY INSTALL

The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.

Product description

Pyle Model : PSLSW4

4-Ch. Speaker Selector System

Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System

Features:

Convenient Audio Control for Up to 4 Pairs of Speakers

Home Theater Stereo Amplifier System Support

Independent Audio Source Channel Volume Controls

Input/Output: Screw Type Connector Terminals

Compact Desktop / Tabletop Receiver Design

Front Panel Button Control Center

Master Power Switch

Built-in Electronic Overload Protection Circuitry

Technical Specs:

Power Handling: 100 Watt MAX Per Audio/Speaker Channel

Speaker Selector Type: 4-Channel

Speaker Cable Wire Support: Up to 14-Gauge (14 AWG)

Minimum Impedance: <8 Ohm

Frequency Response: 20Hz-20kHz

Dimensions (L x W x D): 16.9'' x 6.3’’ x 3.0'' -inches

• 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
• CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
• INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
• EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
• OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability

User questions & answers

Question:	Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you
Answer:	Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps.
Question:	I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together
Answer:	Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps.
Question:	Can the speaker connectors take banana plugs as opposed to threading the wires
Answer:	I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly.
Question:	So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to
Answer:	Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though.

Product features

4-Ch. Speaker Selector System

This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.

CONTROL 4 SPEAKERS

The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire

INDEPENDENT AUDIO CONTROL

Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.

EASY SETUP

Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance

Protection

Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.

Watt

The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup

Dimensions

The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.

Product description

The OSD Audio 70V 2 Zone Speaker Selector is a great way to distribute sound to multiple zones and channels. It has adequate volume control to switch between zones and channels.



Optimal Speaker Design is engaged in the design, engineering, and distribution of high-quality home and commercial audio products. Our products range in complexity from simple in-ceiling speakers to whole house audio systems—all with beautiful styling and high-end sound quality.



Our U.S.-based research, development and design team, is supported by a network of cutting-edge acoustical, mechanical and electrical engineers. Together, we create products that combine the latest technology with ease of use for a quality sound experience.



With extensive product and application knowledge, our exceptional team provides you with custom solutions to create the perfect audio solution.

• SOUND QUALITY: The SS2V70 speaker has a single two conductor input and a straight pass through output system for 100 Watts of power to be in each channel or zone.
• COMMERCIAL: A single 2 conductor input and direct pass thru allows stacking additional SS2V70 Speaker selectors. 70V rules apply to the number of speakers used per zone, matching power from the 70V amplifier.
• VOLUME CONTROL: The volume control features a Rotary style knob with each zone having an on and off switch to control where the sound is playing from.
• POWER: The speaker selector features two independent zones that each are controlled by 100 Watt 70V Mono Volume Control. Use the zones to surround your house or office with audio and music.
• EASY INSTALLATION: The connectors are easily removable with screw-down terminals for a secure connection. It accepts a maximum size of a 16 gauge wire.

User questions & answers

Question:	How do I hook up 4 outdoor speakers for the layman
Answer:	I've never owned the Slik, but the RetiCam I have. (ready for what?) But I do own a Slik 700 prodx, which, like all their tripods, is very sturdy and well-built. Features-wise the RetiCam is probably superior, but this doesn't mean crap if it isn't durable. If you plan on using it a lot IN THE FIELD for macro, as I tried to do, the SLIK is probably far superior. If you plan on using it at home to shoot toys etc. then the RetiCam will serve you well. Just don't get it mixed up with the toys or you'll never find it (My son has toys made better than this). I'd still go with the better build quality you get from Slik. POC? NOT!!
Question:	Will this item allow me to run 2 center speakers off of 1 center channel; and allow for correct speaker impedance? My receiver runs hot in doing so
Answer:	It is possible, but it really depends on what you want kind of adjustment you want to do and the size camera you will have on the ballhead. The friction adjustment is fairly coarse but it is very easy to adjust and I can make quick adjustments to re-position my camera.
Question:	can this be used with a 25V setup
Answer:	The circumference not extended is 9"The circumference extended is 11"
Question:	Why do none of these units have a remote control
Answer:	Yes. I am pretty certain that it works on the entire "U" for Universal line.
Question:	what are the exact dimensions of this
Answer:	Yes, it should work with an S-105. I have one similar enough to the S-105, (Has an identical head) and this quickpost works superbly in it.
Question:	Will this device handle 135w of power from our new sony strdh130 2 channel stereo receiver? What gauge speaker wire do I need to buy
Answer:	Researching other websites that sold this piece I came up with the following information... Fits: 35DN, 102, 112, 212DLX, 1000, SL-61, SL-51S (Japanese Version) S103, S302, Slik 1000, Sport II, U112, U210, U212DLX, and from another site... Quick-release post for U212 DX. Also for S502 (discontinued), S302 (discontinued), U102 (discontinued), U112 (discontinued), U112 Deluxe (discontinued), U212 (discontinued), 444 Sport II (discontinued), 444 Super Sport (discontinued). It seems it fits all the Silk heads of this type. Don't know why yours isn't listed. If it looks like this one, I would say it fits as this one looks like my head. https://www.worthpoint.com/worthopedia/preowned-slik-s104-system-camera-1791763474 (Cut and paste if you need to see it.)
Question:	Will this work with a 70v amplifier and speakers, or just 8ohm
Answer:	You screw the threaded post into the socket on the bottom of the camera, and the chrome, disk-shaped bottom of the U212 fits into the socket on the tripod's mounting platform - then you turn the lever on the side of the mounting platform until the U212 is firmly grasped by the mechanism in the socket.

Product description

The NEW TEC-905B speaker selector with volume control will allow you to use two stereos with up to 10 speakers (5 pairs) placed around the house, restaurant, office, warehouse etc. You can turn each set of speakers on and off, and adjust the volume for each pair as well. The input for the TEC-905B comes from your stereos, amps, receivers, etc. This just means you take the speaker wires from the back of your stereo, amp, etc. and plug them into the either input terminals on the back of the TEC-905B. Each speaker pair has independent rotary volume control. Volume adjustment and impedance matching is accomplished through internal heavy-duty multi-trapped transformers for each speaker. This allows complete, independent control of each pair with maximum efficiency and virtually no generation of heat. The built-in precision auto impedance correction and overload protection circuits will safe-guard your amplifiers and speakers from damage due to excessively low impedance when all 10 speakers are playing at the same time. Rear gold plated color coded professional grade banana socket connections accept up to 12AWG wires. Also has headphone input with individual volume control as well. Features: Each pair of speakers can be alternatively switched to either amplifier A or B Frequency response: 20 Hz to 20 kHz High efficiency transformer based designed, fully automatic amplifier impedance protection Compatible impedance with 4 - 16 ohm speakers 100W RMS, 200W peak per channel power handling Individual rotary volume controls Master ON/OFF switch connects and disconnects the signal distribution from the amplifiers to the speakers Dimensions: 2.25"H x 15.5"L x 8.5"W Weight : 12 lb Headphone input with volume control Pre-printed zone and equipment list label included for easy speaker connection identification Sturdy metal enclosure Passive design, no power required

• Dual Source inputs, 5 Speaker Pair outputs
• Accepts up to 12 gauge speaker wire via gold plated banana socket connections
• High efficiency transformer based designed, fully automatic amplifier impedance protection
• 100W RMS, 200W peak per channel power handling
• Individual rotary volume controls

User questions & answers

Question:	Cna you still use wall mounted speaker volume controls in each room to control the volume
Answer:	Yes! I am using 2 Niles box to run 4 Cerwin Vega AT15 and 4 Kenwoods KLZ999... no problem at all!
Question:	The one page "manual" says will accept impedance from 4, 8, or 16. My speakers are 6 ohms. Are they compatible? Any risks
Answer:	yes
Question:	will this deliver 8ohms to each speaker
Answer:	I'd guess from the setup you describe, the 5 speakers in the family room are for a 5.1 Home Theater System, the rest being for stereo audio playback.This device allows a receiver to drive 6 pairs of stereo speakersA dual zone A-V receiver would be best, main zone to drive the 5 speakers and then hook the niles to Zone 2 to run the house audio speakers.
Question:	someone knows what the difference between this product and http://www.amazon.com/Matrix-Speaker-Selector-Switch both the same manufacturer
Answer:	HPS-6 allows you to only turn individual speaker pairs on and off at the switch. SSVC-6 supports inputs from two different sources. Two stereo amplifiers playing different music or other audio can connect and be selected at the volume control on the switch. So each pair or speakers can play either of the two input sources and volume is adjustable. Power handling is likely very close with both units. Check sp;ecs if you are going to rock the casbah. impedance matching with be featured on both switches. That is a big deal. Keeps the amps from running or failing.

• ◆4 in 1 out with Hassle-free Automatic Switch◆ This 4-port HDMI switch is a perfect solution for you to share 1 HDMI display or projector with 4 HDMI source devices. This switch ensures effortless operation with automatic switching that detects and selects a newly connected device. The HDMI switch also supports manual operation, using the included IR remote control or the front-panel buttons.
• ◆Crystal Clear Video&Audio Extraction◆ Can output astonishing picture quality with support for 4K@60Hz with 4:4:4, HDCP 2.2, and HDR 10. Also, it's backward compatible with 4K@30Hz and 1080P displays. Features S/PDIF Digital Optical Audio and Analog L/R stereo audio output, allowing you to connect to any AV receiver or amplifier. Supports audio in Dolby TrueHD, DTS-HD Master Audio, Dolby Digital and AC-3 audio formats.
• ◆Design&Fast Heat Dissipation◆ This HDMI Switch can help you organize the cable clutter, save space and money with a compact and slim design. It comes with gold-plated connectors that provide resistance against corrosion and reduce dullness. For dependable performance, the splitter features a durable aluminum alloy housing that provides passive cooling and air vents on the side to help better ventilation.
• ◆Wide Compatibility and More Flexible Solutions for Various Occasions◆ This switch is ideal for various occasions such as home theater, conference room, classrooms, training room, control centers, etc. It helps you save time and money. Works perfect with PlayStation, PS3/4, Xbox, Blu-ray players, set-top boxes, satellite receivers, Chromecast, Apple TV, Amazon Fire TV Stick and more.
• ◆No-hassle Claim Process, Enjoy Our Worry-free Warranty◆ We got you 1-Year Manufacturer Warranty covered. And we offer free lifetime technical support from TESmart Customer Support Team. TESmart always strive to develop technical products and help our customers live a more convenient, smart and fulflling life.

User questions & answers

Question:	Does this support hdr
Answer:	The quick release is made with a standard SAE 1/4 inch thread. It should fit the tripod, however, I use it on my unipod.
Question:	Does this support dolby vision
Answer:	No it will not. You need a 6027 found at: http://www.tripodquickrelease.com/Slik_Quick_Releases.htm
Question:	Can i still change tv volume and turn tv on via apple tv remote when connected through this
Answer:	Yes, I got this specifically for my Slik Sprint Pro II tripod, which uses head SBH-100DQ. This is the head it comes with by default if you order the "Slik Sprint Pro II Tripod in Gun Metal With Quick Release Ball Head & Case" version. Fits perfectly.
Question:	Hi, i was wondering what is the max hdmi input cable distance and the max output cable distance for this converter box? thanks
Answer:	I don't think so. The tripod can only raise about 1' maximum off the table top. Not enough height for the vertical clearance to shoot down on a book page.

Product features

The 4X1 HDMI Switch Q&A

Q:Why does this HDMI switch have Black Screen?

A: Please check all cables connected well, Plug and play again.

Our HDMI switch supports HDR10, if your input/output devices also support it, please be sure to turn it on in the settings, because some devices are turned off by default, so maybe there will be no display when connected our products.

About HDMI cable Length

1080P Resolution: Input within 33ft(10 M) ,Output within 65ft(20 M)

4K@30Hz Resolution: Input within 16ft(5 M) ,Output within 33ft(10 M)

4K@60Hz Resolution: Input within 10ft(3 M) ,Output within 16ft(5 M)

The input/output capability of each device is different, so the above data is for reference only.

Q:No audio on Port 1, other ports work fine ?

A: Normally that the DVI output does not carry audio signals, so the audio signal cannot be output,If the computer is an HDMI output,please select your (HDMI) monitor as the default output to solve the sound issue.

Specification:

• Input: 4 * HDMI Type A
• Output: 1 * HDMI Type A, 1 * AUX (audio output L / R), 1 * audio output S / PDIF D
• Dimensions: 196 (L) x 80 (W) x 24 (H) mm
• Item Weight: 500g
• Power supply: DC 5V 1A

Plug and Play & Automatic Detected

• Support hot plug, connect or disconnect devices to the HDMI switch in any time and without turn off devices
• Support automatic input source detected, when connected new input device to the switch, it will switch to the latest input source automatically.(Note: could not close this automatic detected function in this HDMI Switch)

HDR 10 and Dolby Vision

Our HDMI switch supports HDR10, if your input/output devices also support it, please be sure to turn it on in the settings, because some devices are turned off by default, so maybe there will be no display when connected our products.

Product description

Whole-house audio distribution has never been easier and more affordable than with the Sound Appeal 6 zone speaker selector. Instead of putting separate volume controls in every room they are built into this selector making installation and operation seamless. No longer is an expensive and complicated audio distribution network necessary, simply connect up to 6 separate sets of speakers and adjust them at the touch of a button. Each room’s volume level can be raised and lowered or turned on or off. This speaker selector also features built in impedance matching so protecting your amplifier and your speakers is something you’ll never have to worry about. It will maintain a constant 8 Ohm load permitting plenty of volume no matter how many zones are playing. It supports a frequency range of 20Hz-20kHz and accepts wire gauges up to 14AWG. Installation is straight forward and simple, this item also features Sound Appeal’s full 5 year warranty so you can enjoy distributed sound for years to come.

• Easily control six separate rooms of distributed audio
• Adjust volume for any zone with independent volume controls for each
• Easily match speakers and protect you amplifier with included impedance protection
• 100 Watts RMS per channel
• Accepts up to 14 AWG speaker wire to each terminal

User questions & answers

Question:	What's the power handing on this per channel, pls confirm if 100 is peak or RMS
Answer:	A: I would think it would be strong enough. Although I can't really imagine why you would have to do that. This mount will never be stronger and more stable than the way it was designed to be mounted. Also..another reason for the design is to ensure that the base plate that goes under your camera and the receiver for flush under the camera body so there would be little or no obstruction in camera function or the tripods abilities. Most tripods can tilt your camera to virtually every angle so depending on the camera body, if you do not use the quick release the way it was designed you may or may not be contributing to more stress on the base of the camera..
Question:	Does this product work
Answer:	The part that screws on to the tripod is 1 3/8 inches by 2 3/8 inches (the long part was measured in the middle where the latch is located.) The part that screws on the camera is 1 1/8 inch by 1 1/2 inch.
Question:	Does this product work
Answer:	This thing is flush on BOTH sides. The cork part your camera sits on AND the part that sits on you tripod or other mount. Even the release handle fits between the two surfaces and does not interfere. I have one of these on a permanent windshield mount for an action cam I am using as a dash cam. Makes it SO easy to remove the camera for security reasons. I would have posted pictures but there doesn't seem to be a way to post them on this answer.
Question:	I have 10 klipsch r-1650-c speakers in 5 diff rooms, i plan on using them with a yamaha r-s202 reciever, can this selector box handle those
Answer:	Hello. Yes this quick release plate is metal - definitively not plastic.Please let us know if you have any additional questions. Have a great day!Deven MorganEvent Cameras