• 360 Full Room sound. An acoustic reflector sends full, rich sound in every direction
• Portable wireless design with 12 hours of battery time
• Multi-room music. Pair up to 10 speakers with Sound Space Link to enjoy multi-room sound. Streaming can be done over Wi-Fi or Bluetooth
• Integrated Alexa voice assistant. ZIPP 2 is Alexa enabled with far field mic array with 6 mics - simple and hands-free
• Pre-set 5 playlists or radio stations. Store and play 5 of your favourites and play directly

• Echo Dot is a voice-controlled speaker that uses Alexa to play music, control smart home devices, make calls, answer questions, set timers and alarms, and more.
• Play music from Amazon Music, Apple Music, Spotify, Pandora, SiriusXM, TuneIn, and iHeartRadio.
• Call or message family and friends hands-free, or drop in from the Alexa App to your Echo device.
• Controls lights, locks, thermostats, and more with compatible connected devices.
• Use the built-in speaker, or for bigger sound, connect to speakers through Bluetooth or audio cable.
• 50,000+ skills, including Jeopardy!, Lyft, Audible, and Domino's. Always getting smarter and adding new features.
• Hears you from across the room with 7 far-field microphones for hands-free control, even in noisy environments or while playing music.

• [ Perfect Match for These Devices ]: Nintendo Switch,Switch Lite, PS4 and PC with Win8 or above system. ROUTE AIR supports Bluetooth speaker and all wireless earphones with Bluetooth 5.0, 4.0, 3.0 or 2.1. It also supports dual connections. So when you play a two-player game, both people can hear the sound.
• [ Easy to Use, Just One-Step ]: Set your Bluetooth earphones to pairing status. Then insert ROUTE AIR, hold the pairing button A or B 4 seconds into pairing mode with blinking white LED. Pairing is successful once LED turns to constant white. And do not need to pair again next time.
• [ Real-Time Audio Sync with aptX Low Latency ]: GuliKit ROUTE AIR adopts the aptX low latency codec to eliminate that annoying lag you may get and ensure smooth transmission for excellent game feel. You can easily enjoy lossless CD sound quality.
• [ 10 Meters Barrier-Free Transmission ]: Advanced ceramic antenna provides up to 10 meters barrier-free transmission without any loss. You can enjoy more space and choose the distance you want. Even if several players watch a video game together, it won't look crowded.
• [ Small and Portable Do Not Take up Space ]: The beautiful low-key elegant black with thin shape is about 5 mm. Hiden buttons and small LEDs at the buttom side provides no any visual interference in gaming.

User questions & answers

Question:	Anyone who has this can you test to see if it works if it's not inserted fully? Leave a 1mm gap to test
Answer:	I tried this and it does not work. If you are thinking about using it with a grip I don't think it will work. It does work fully inserted with the Satisfye grip that I have, but I have tried it with a Mumba grip and it doesn't fit/work.
Question:	Having trouble pairing airpods they worked for a bit but Can’t pair them again been trying to do the “easy steps” but it’s not working
Answer:	Be sure you remove the the airpods from any other device that you have used them on. That way they won’t revert and connect to them. Then simply sync them to it. Took a couple tries but worked.
Question:	Does it support the microfoon on the headset for in game voice chat? For example fortnite
Answer:	Hello. For your question, this Bluetooth adapter currently does not support. You can conduct online voice chat via other software. Hope to help you.
Question:	Does this device work with Apple Airpods
Answer:	Yes, it connects the Switch to all Bluetooth headsets. Our Bluetooth adapter supports SBC, AptX, AptX LL codec, please confirm whether your Bluetooth earphones supports AptX LL or AptX. If your Airpods don't support AptX or AptX LL, there will be a slight delay with a delay of more than 70 milliseconds. If it is in a game that relies on game sounds, it may have some impact.

Product features

GuliKit Route Air & Route Air Color

The Slimmest Wireless Audio Adapter for the Nintendo Switch,Switch Lite

Enjoy wireless audio on Nintendo Switch,Switch Lite, PS4 and PC

Dual Streaming

• Support two headphones with wireless HIFI audio simultaneously and all Bluetooth 5.0, 4.0, 3.0 or 2.1 compatible.
• Hiden buttons and small LEDs at the buttom side provides no any visual interference in gaming.

Super Low Latency

Enjoy smooth gaming with no lag supported by Qualcomm aptX Low Latency codec and digital HIFI audio.

Slimmest Design

The thinnest Bluetooth wireless audio adapter with only 5mm thick body exclusively for the Nintendo Switch & Switch Lite.

Plug and Play

Customized USB C port for easy use, dual buttons for two earphones connection with fast and simple pairing.

TV mode supported

When the switch is docked in TV mode, the GuliKit Bluetooth Transmitter can still be installed on the USB-A port on the side of the TV dock (using the included USB-C to USB-A adapter).

Product description

PyleHome Model : PSS6

6-Ch. Stereo Speaker Selector

6 Channel High Power Stereo Speaker Selector

• Up to 6 Separate Speaker Pairs to Your Stereo System
• Accepts Speaker Wires up to 14-Gauge
• Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
• Protection Circuitry Keeps It Running Smoothly
• Frequency Response: 20Hz-20KHz
• Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)

This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
• CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
• PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked

User questions & answers

Question:	I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector
Answer:	There is no difference in for the install if you mount speakers in the wall or ceiling.
Question:	Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver
Answer:	I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick).
Question:	How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A
Answer:	I would recommend a 5.1 home audio receiver.
Question:	can i play all 6 speakers at the same time
Answer:	The pyle pta44bt would be a good amp for the speakers.

Product features

Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

Product description

Pyle Model : PSLSW6

6-Ch. Speaker Selector System

Multi-Zone Speaker Selector, 6-Channel Audio Speaker Receiver System

Features:

Convenient Audio Control for Up to 6 Pairs of Speakers

Home Theater Stereo Amplifier System Support

Independent Audio Source Channel Volume Controls

Input/Output: Screw Type Connector Terminals

Compact Desktop / Tabletop Receiver Design

Front Panel Button Control Center

Master Power Switch

Built-in Electronic Overload Protection Circuitry

Technical Specs:

Power Handling: 100 Watt MAX Per Audio/Speaker Channel

Speaker Selector Type: 4-Channel

Speaker Cable Wire Support: Up to 14-Gauge (14 AWG)

Minimum Impedance: <8 Ohm

Frequency Response: 20Hz-20kHz

Dimensions (L x W x D): 16.9'' x 6.3’’ x 3.0'' -inches

• 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup.
• CONTROL 6 SPEAKERS: The new indoor multichannel speaker switcher controls up to 6 speaker pairs connected to a stereo at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire.
• INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair.
• EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 6-channel multizone controller, connect up to 6 pairs/12 speakers and enjoy high quality audio performance.
• OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.

User questions & answers

Question:	I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible
Answer:	While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps.
Question:	Does this switch allow me to control sets of speakers independently
Answer:	You can control up to 4 sets of speakers independently or play all at the same time! I have switch A for patio speakers, switch B for inside house, sometimes I play A or B or A+B
Question:	One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist
Answer:	In modern amplifiers the protection button is actually used to simulate a safe ohm load to the amplifier, not mask the lack of a load. When you connect multiple speakers of certain ohm ratings in series or parallel, it alters the ohm load presented to the amplifier. The switch allows you to attach multiple speaker sets while presenting and "buffering" a consistent/safe ohm load instead of the actual load. 2 x 8 ohm speakers in parallel on the same channel would show up as 4 ohm (divide ohm rating of speaker by number of speakers), which could cause your amplifier to fail (it needs to work harder) if not designed to drive speakers with that ohm rating. If you are using more than 2 pair of 8 ohm speakers simultaneously you would turn on the protection mode to present an ohm load of ~4 ohm instead. Most protection solutions present a 4.5 ohm load in this scenario. Understand that ohm loads are AC and thus are constantly fluctuating during playback. Speaker ohm levels typically will "change" @ different volume levels etc. Low impedance allows for a more efficient electric signal. Typically speakers are rated 4, 6 or 8 ohms. Lower end receivers can sometime have issues driving low impedance 4 or 2 ohm speakers.
Question:	How do I hook this up to my 5.1 receiver
Answer:	Hello Dan,This device is for other areas of a home where you have additional speakers and is not made to be used with the surround sound system. It can be used with "Stereo Receivers" or with 7.1 A/V Receivers where your only using the 5.1 portion of the receiver. What that means is if you have a surround sound system in your home, then all the speaker outputs of the receiver are dedicated to the surround sound and at that point there are no more speaker terminal outputs to be used.However, if your receiver is a 7.1 A/V receiver and your only using it as a 5.1 Surrond Sound System, then you will have 2 additional speaker outputs that aren't being used.At that point you can attach those terminals (via 2 speaker wires a left & a right) to the Pyle 4 Channel Speaker Selector. Now connect the other rooms to the outputs on the Pyle Speaker Selector. ***Make sure you have the correct speakers paired to each individual room when you connect these wires. You can easily determine this by taking a battery from your remote control and placing the ends of the speaker wires to the battery. Positive end of the wire + to the positive end of the battery and the negative end off the same wire to the negative end of the battery, You can hold the negative wire tight to the battery with your thumb while you release and then retouch and release and retouch the positive end a few times. you should hear a popping sound coming out of the speaker. This will let you know which wire goes to which speaker in which room or area. I usually use a "Sharpie" Marker and label the wire "Living Rm" or "Dining Rm" or what ever the room is that the wire goes to. *****Now, and this is most important or you will "FRY" your Pyle unit, make sure the negative wire that is connected to the Pyle output is the same negetive wire that is connected to the speaker terminal in the room where that wire goes and the positive does the same. IF YOU CROSS THE WIRES AND PUT THE NEGATIVE WIRE IN THE POSITIVE TERMINAL, YOU MOST LIKELY WILL GET BAD RECEPTION TO THAT SPEAKER OR FRY (DAMAGE) THE PYLE UNIT AND MAYBE EVEN YOUR RECEIVER. ALSO, MAKE SURE NO BRAIDS OFF OF THE SPEAKER WIRES TOUCH THE CHASSIS OF THE RECEIVER OR EACH OTHER. THIS WILL SHORT THE UNIT.Finally, you may have to go into the setting of your A/V Receiver and select the "Speaker Settings" and scroll to where the "Surround Back" or "Zone 2" Speaker set up is and select "NO". This will deactivate the use of those speakers to be used in the room where the Surround Sound is and will allow them to be used for "Stereo Music" to other rooms.In about 90-100% of all A/V Recievers have to use "Analog" or "RCA Cables" from the device you want to hear the music or sound from in the rooms that the Pyle is hooked up to. FM Tuner (or radio stations), Pandora and Internet Radio Stations are already incorporated in the receiver and will play with no problem.Now just select "Zone 2" on the Receiver and press the "Input" selection you want to hear in those other rooms. Raise the Zone 2 Volume Level for those rooms and you should hear music or audio. Please note that some receivers have a time period of 5-6 seconds for you to do these steps, so when making your audio selection and volume level, know where your audio selection button is that you want before performing these steps or your Receiver timer will time out and you will have to permorm them again. It can be frustrating at first for a novice. It was for me. Sometimes still is. LOLA couple of things to know. I would only use this device if I had "Individual Volume Controllers" in each of the rooms or areas where I want Music or Sound. If you don't, then the "volume level" will be the same in all those areas. Volume Controls allow you to do what they say, they can "Control" the volumes level. If the Music or Sound is too High in one room, it might be too Low in an other room. Volume Controls correct that.If you don't have individual Volume Controls in the rooms where your speakers are, then you want to purchase the Pyle Home PSPVC4 4-Channel High Power Stereo Speaker Selector with volume Control. http://www.amazon.com/Pyle-PSPVC4-4-Channel-Speaker-Selector/dp/B0013CH7UK/ref=sr_1_1?ie=UTF8&qid=1376744129&sr=8-1&keywords=Pyle+Speaker+Selector+with+Volume+Controls If you have any issues getting the sound to pass through Zone 2 of your Receiver, contact the units manufacturer and ask for tech support.I hope this helps.Ken Nichols, PresidentSIGHTS & SOUNDS OF SOUTH FLORIDA, INC.3801 Environ Blvd.Fort Lauderdale, FL 33319305-788-1895

Product features

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

Product description

Switch selector volume control switch box hub distribution box for multi channel high powered amplifier control 6 pairs of speakers

• Up to 6 Separate Speaker Pairs to your Stereo System
• Accepts Speaker Wires Up to 14- Gauge
• Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
• Up to 6 Separate Speaker Pairs to your Stereo System - Support Two Stereo Amplifiers
• Accepts Speaker Wires Up to 14- Gauge - Frequency Response: 20Hz-20KHz
• Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms - Dimensions: 16.92- Inches(W) x 3.03- Inches(H) x 6.29- Inches(D)
• Protection Circuitry Keeps it Running Smoothly
• Individual Speaker Volume Control

User questions & answers

Question:	can this replace my Pyle Pro PT
Answer:	No, not the devices have the same functions!
Question:	Ok, I bought the PT510 amplifier, and the PSPVC6 speaker selector, but not sure how to connect them together. Can anyone help
Answer:	Ok I'm going to try and keep it simple. Normally, once the amp is connected the 'sound' travels out of the red/white or left/right speaker connectors that are attached then to the speaker system. In your case, think of the speaker box as a 'conjunction' (like the words 'and/ but' in a sentence)..so just connect the 'speaker out' on your amp to the 'speaker in' on the speaker selector box...then connect the speaker box to the 6 speakers...be ready with a small flat head screw driver to open each the speaker connection ports...it's a bit more tedious but assures a professional non clip in/out connection...good luck...and make sure every thing is off to avoid 'blowing out' of the speakers and/or unit.
Question:	Does this have impedance protection - control against low ohms driving multiple speakers
Answer:	http://manuals.pyleusa.com/PDF/PSPVC4-6.pdf The last few pages of manual shows impedance of turning on combinations of speakers It is the amp that needs to be 4 ohm stable, I have a Denon AVR 3300 and AVR 2500. The more speakers active, the lower the impedance, (ohms Law) and the more power needed from the amp According to Crutchfield, we need a 4 ohm stable amp, and the Denon family provides overload protection, and the Denon amps have a 8 ohm (default) and a4 ohm setting I already fried an Onkyo amp, running all the speakers at once, for an extended period.
Question:	Is the Pyle PT510 240 Watt Amplifier a good receiver to use with this. I want to put sound in many rooms in my office
Answer:	I am by no means an AV expert. This amplifier was recommended to me by our AV guy in order to amplify the sound for distribution into several rooms in which we have speakers. We primarily use this amp in connection with an Apple TV device to play music from our iPhone or iPad in our kitchen, den, family room and outside speakers. Hope this response is helpful for you. Kind Regards, Robert

Product features

Premium New and Improved 6 Zone Channel Speaker Switch

Features:

• Multi-Channel High Powered Amplifier
• Up to 6 Separate Speaker Pairs to your Stereo System
• Accepts Speaker Wires Up to 14- Gauge
• Protection Circuitry Keeps it Running Smoothly
• Individual Speaker Volume Control
• Support Two Stereo Amplifiers
• Rugged & Durable Housing Construction, Cabinet Heatsink
• Control Powered 6 Channel Amplifier
• Plug and Play Easy Install

Technical Specs:

• Power Output: 6 x 100 Watts, Power Supply: 120/240V Voltage Selector
• Amplifier Design: 6-Channel, Minimum Impedance: 8 Ohms
• Frequency Response: 20Hz - 20KHz, Signal to Noise Ratio: >81dB
• Channel Separation: 80 dB, Crosstalk between Channels: 50 dB
• Speaker Terminal Wire Size: 14-22 gauge
• Max. Amplifier Input: 100W RMS, 150W AVG
• Max. Output per Speaker: 18W RMS, 50W AVG
• Product Dimension (L x W x H): 6.29'' x 16.92'' x 3.03'' -inches

Product description

The Niles name is synonymous with premier whole home audio solutions. For nearly four decades, Niles has delivered innovative products that enable simple and easy access to home entertainment, and we are now creating audio solutions that seamlessly integrate with lighting and climate control.

• Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak
• Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
• Individual Room On/off Selector Switches
• 12-step Controls; 54dB Maximum Attenuation
• Removable screwless connectors accommodate up to 12-gauge wire
• Accommodates 6 pairs of speakers
• Power handling - 100 watts per channel RMS; 200 watts peak

User questions & answers

Question:	Can this selectror control volume
Answer:	Hi, Each speaker will have its own volume control independently. Will ship right away. Please order. Thanks.
Question:	Is this speaker switch temperature sensitive i.e. can I set one up in my attic and would possible temperature fluctuations affect its functionality
Answer:	The unit isn't much more than switches and potentiometers, so I don't think it would be sensitive to ambient temperature unless the temperatures encountered were EXTREME. As the other reviewer noted, your primary concern with an attic set-up would be accessibility. The whole point of the selector is to control a distributed audio system, so if you couldn't get to it easily it would be a waste of effort. I am very pleased with my selector. It works as advertised in my system and has never given me any trouble.
Question:	I have receiver ( sony strdh750 7.2 channel 4k av receiver) by what channel should i go to this speaker selector, i have center, front a, etc
Answer:	Hi,Unless you have speaker A and B selection on your Sony. Otherwise i wouldn't suggest you taking the main channel to speaker switcher. Thx.
Question:	Could this be used for 3 different speaker zones inside and 3 more outside with volume control for each zone? Using a Sonos amp
Answer:	I have to disagree with this answer. I have two of these units and they do control 6 pairs of speakers, this equals 12 total, not 6. Again the Niles SSVC 6 will control 12 speakers in pairs of two for right and left channel. It does have volume control as well as on/off control for each of the 6 pairs. This unit includes labels for each zone. It does send equal signal to each speaker set to balance out the ohm load on your amp or receiver to prevent over load.

• SOUND QUALITY: The audio stays at a consistent quality with the SSVC6D to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound.
• IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
• POWER: This speaker selector allows you to distribute an amplified signal for up to six zones throughout the house, letting you choose which source is playing in each designated zone.
• DESIGN: Front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons.
• EASY INSTALLATION: The SSVC6D includes a removable phoenix connectors that accept up to a 14 gauge speaker cable to avoid frustration when connecting multiple speakers.

User questions & answers

Question:	Can you tell me what the warranty is on this product
Answer:	This is just a simple switch - there are no delay elements in it. If you are experiencing echo, reverb, or feedback, the problem must be somewhere else in your setup.
Question:	Can I connect this to my receiver via bluetooth
Answer:	This won’t do what you’re trying to accomplish. This is a brilliant, yet simple, A/B switch. I use A for my PC audio out and B for my cell audio out to one set of headphones.
Question:	what is the maximum continuous amplifier power for which this product is compatible? The SSVC6 says 300W, but I can't find a spec for this one. THXS
Answer:	Short answer: Yes. Longer answer: You had me curious as to the answer, so I just hooked mine up the way you describe. I connected one PC going INTO the front headphones-out port, and another PC going INTO the speaker-out in the rear. Then I hooked up my speakers to INPUT B, and my headphones to INPUT A. That turned the A/B switch into an output selector and the front switch into an input selector. Everything worked fine, but for the completeness of the answer, I have to point out that the first time I connected things this way I got a 60Hz hum in my speakers, but disconnecting and reconnecting fixed that problem. I tested the speaker, volume, mic, and mute functionality, and they all worked well. Again, for the completeness of this answer, if I connect my Dell G7 laptop to a Type-C docking station (handling the audio, too), and the docking station connects to the Nobsound, and my headphones (with mic) are plugged into the Nobsound's headphones-out, then the laptop doesn't detect my headphones' mic. But that doesn't really bear on the answer you are looking for ( it's probably just a config I haven't sussed out yet); it's just something to be aware of.
Question:	What do I need to look for in a receiver to pair with this volume control selectors
Answer:	While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps.

Product features

Dual sourcec

The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.

Volume Control

Using the same technology as our in-wall volume controls, most units offer volume control per zone.

Impedance Protection

Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.

Easy to Install

Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.

OSD Audio 6-Zone Dual Source Speaker Selector

The SSVC6 speaker selector lets you add up to six speaker pairs around your house with individual volume controls for each speaker pair. Features removable input-output connector blocks for easy, yet secure wiring. Full impedance protection to protect your amplifier from low impedance when multiple speaker pairs are selected.

Product description

The SS-6 Speaker Selector is a resistor-based, impedance matching speaker selector used for connecting up to six pairs of 4-ohm or 8-ohm speakers, while maintaining a safe impedance load for your amplifier or receiver. Each pair of speakers can be independently turned on or off using push buttons on the front panel, with no need for worrying about amplifier loading.

• Connect and safely control multiple speaker pairs with a single amplifier. Automatic impedance protection circuitry.
• 100 watts RMS per channel power capacity. 4. 6-ohm minimum amplifier impedance with six 4-ohm speakers selected, 5. 3-ohm minimum with 8-ohm speakers.
• Supports 12-16 AWG speaker wire. Individual zone on/off buttons.
• Heavy-duty screw-type connectors.
• Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds or bridged configurations. Accurate, noise-free switching.

User questions & answers

Question:	can the speaker connectors on the back be removed for easy connect? "Phoenix plugs
Answer:	that i can't answer, I used them on the rear hatch cables in a 2001 expedition. Sorry man

Product description

The SSVC-6.1 Speaker Selector is a resistor-based, impedance matching speaker selector used for connecting up to six pairs of 4-ohm or 8-ohm speakers, while maintaining a safe impedance load for your amplifier or receiver. Each pair of speakers can be independently turned on or off using push buttons on the front panel, with no need for worrying about amplifier loading. Each zone features an independent volume control.

• Connect and safely control multiple speaker pairs with a single amplifier. Automatic impedance protection circuitry.
• 100 watts/channel continuous power handling capacity, 200 watts/channel peak. 4.6-ohm minimum amplifier impedance with four 4-ohm speakers selected, 5.3-ohm minimum with 8-ohm speakers.
• Individual zone on/off buttons and volume controls.
• Heavy-duty screw-type connectors supporting 12-18 AWG speaker wire.
• Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds or bridged configuration. Accurate, noise-free switching.

User questions & answers

Question:	In the picture, the speaker wire jacks look flimsy. Will they really handle 12 gauge speaker wire? Thanks for mentioning automatic impedance adaptat
Answer:	Yes, it is adjustable within the limits of its mounting. Rotation is 360 degrees then connect. Sounds silly, but.....I am very satisfied with mine!!!!!!!!!!!!

Product features

Puppy Dog Pals: Volume 1 DVD

They're cute, cuddly and all collared up for pup-tacular adventures! Puppy Dog Pals: Volume 1 is a collection of adventures featuring the fluffy stars of the popular Disney Junior series.

Magic in the details

While their owner Bob is away, adorable puppy brothers Bingo and Rolly embark on wacky missions stretching from their own backyard to amazing locations all around the world! With support from their ''big sister'' Hissy, a neighborhood full of animal friends and Bob's high-tech inventions, these hilarious heroes are always ready to unleash plenty of fun.

Product description

PyleHome Model : PSS8

8-Ch. Stereo Speaker Selector

8 Channel High Power Stereo Speaker Selector

Up To 8 Separate Speakers Pair To Your Stereo System.

Accepts Speaker Wires Up To 14-Gauge.

Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum Impedance Of 8 Ohms.

Protection Circuitry Keeps It Running Smoothly

Frequency Response: 20Hz-20KHz

Dimensions 12.8'' X 2.04'' X 6.12''

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
• CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
• PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
• Up To 8 Separate Speakers Pair To Your Stereo System
• Accepts Speaker Wires Up To 14-Gauge

User questions & answers

Question:	Does this unit have impedance matching transformer feature
Answer:	Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you.
Question:	I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device
Answer:	I think you will be fine, depending on how long your wire runs are.
Question:	Can you use it the opposite way....multiple recievers to one set of speakers
Answer:	No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera
Question:	How can it be both new and improved
Answer:	Increase connectivity range

Product features

Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR

The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.

PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE

The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.

PLUG AND PLAY EASY INSTALL

The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.

Product description

Niles SS-6 speaker selector

• Niles SS-6 speaker selector
• Protection circuit safeguards receiver/amplifier
• Separate left and right ground paths for compatibility with all amplifiers
• Removable connectors accommodate up to 14-gauge wire
• 10 year limited
• Handles up to 100 watts per channel RMS
• Protection circuit safeguards receiver / amplifier

User questions & answers

Question:	Can this model handle 8-ohm speakers? Niles' website states that 4-ohm speakers should be used
Answer:	i used 8 ohm speakers. didn't realize there was a recommendation.
Question:	Could I run 5 surround sound speakers from my living room plus 4-6 other speakers throughout the house through this selector and my receiver
Answer:	If you are talking about using the Zone 2 on your receiver to power 4-6 other speakers you could but it would not be the best thing to do. one thing you have to make sure is that your speakers all have the same Ohm rating and that your receiver is capable with that that certain resistance. You would probably be safe with running 2 pairs of speakers but I would definitely not do 3 pairs. I would look into a 4 zone amplifier for that. Hope this helps!
Question:	I have a sonos amp and 8 ceiling speakers. Dont know the ohms of the speaker. Will this work
Answer:	It should work,range of ohms for niles 2-16 ohms it will match your 4 sets of speakers fine.
Question:	How does it connect from the receiver if your "outs" are only plugs
Answer:	The plugs (1-zone Each) have (4-each) set-screws with holes for 2 Pos & 2 Neg each speaker wires from receiver, or Amp SPEAKER output

Product description

The SSVC-4. 1 Speaker Selector is a resistor-based, impedance matching speaker selector used for connecting up to four pairs of 4-ohm or 8-ohm speakers, while maintaining a safe impedance load for your amplifier or receiver. Each pair of speakers can be independently turned on or off using push buttons on the front panel, with no need for worrying about amplifier loading. Each zone features an independent volume control.

• Connect and safely control multiple speaker pairs with a single amplifier. Automatic impedance protection circuitry.
• 100 watts/channel continuous power handling capacity, 200 watts/channel peak. 5-ohm minimum amplifier impedance with four 4-ohm speakers selected, 6-ohm minimum with 8-ohm speakers.
• Individual zone on/off buttons and volume controls.
• Heavy-duty screw-type connectors supporting 12-18 AWG speaker wire.
• Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds or bridged configurations. Accurate, noise-free switching.

User questions & answers

Question:	Input from sony str-dh190 and out to 3 zones but no audio; tried connecting 1 zone and still no audio - tried 6 & 8 ohms - any other recommendations
Answer:	Make sure the input volume is up (Bluetooth, aux from phone or aux) amp volume should be up at least 50%-75%. Then turn up the SS4 vc. Should be on 8ohm, button pressed in (in the on position) and select A or B depending on what you have it plugged into the back.
Question:	Is there a warranty
Answer:	Yes it comes with an one year warranty.
Question:	Monoprice, can I connect 1 pair of rated 8 ohm (nominal 6 ohms - Elacs speakers and a different pair of 8 ohm speakers to play simultaneously
Answer:	Yes, that is the whole point of this product - to allow one amplifier to drive several pairs of speakers, with independent volume control over each pair, and impedance protection to protect the amplifier.
Question:	What does l- l+ r- r+ mean
Answer:	L is for the left speaker and R is for the right speaker.