13 best quality guitar patch cables

Name: Donner Guitar Patch Cables Right Angle 6 Inch 15 cm 1/4 Instrument Cables for Effect Pedals 6 Pack
Brand: Donner
Price: 22.49 USD
Availability: InStock
Rating: 4.7 (250 reviews)

Quality guitar patch cables are essential accessories for guitarists and musicians, as they play a crucial role in transmitting the audio signal from the instrument to various devices like amplifiers, effects pedals, and audio interfaces. These cables are also known as instrument cables or guitar cables. Here are some key points about quality guitar patch cables:

Signal Integrity: High-quality guitar patch cables are designed to maintain the integrity of the audio signal. They have low capacitance and resistance, which helps preserve the clarity and tone of the guitar, preventing signal degradation.
Durability: Durable construction is a hallmark of quality guitar patch cables. They often feature robust connectors and thick, well-insulated cables that can withstand the rigors of live performances and frequent use.
Connectors: These cables typically have two connectors, one at each end. The most common connector types are 1/4-inch TS (Tip-Sleeve) or mono connectors. These connectors have a single conductor and are suitable for connecting guitars to amplifiers and effects pedals.
Length: Guitar patch cables come in various lengths to accommodate different setups. Longer cables can be useful for larger stages, while shorter cables are often preferred for pedalboard connections to minimize excess cable clutter.
Shielding: Quality guitar cables are often shielded to reduce interference from external electrical and radiofrequency sources. This shielding helps maintain a clean and noise-free signal.
Flexibility: Good guitar patch cables are flexible and easy to maneuver.This flexibility is essential for pedalboard setups, as it allows for neat and efficient cable routing.
Low Noise: High-quality cables are designed to have low noise levels, ensuring that unwanted hums, buzzes, or interference are minimized during performances or recordings.
Variety: There are various options available in the market, catering to different needs. Some cables come with straight connectors on both ends, while others have a right-angle connector on one end for space-saving on pedalboards.
Budget and Premium Options: Guitar patch cables come in a range of price points. Premium cables often feature advanced materials and construction techniques, while budget options offer a cost-effective solution for those on a tight budget.
Brand Reputation: Trusted brands in the music industry, such as Mogami, Planet Waves, George L's, and Monster Cable, are known for producing high-quality guitar patch cables.

In conclusion, quality guitar patch cables are crucial components in a guitarist's toolkit. They ensure the reliable transmission of the audio signal from the instrument to amplifiers and effects pedals, preserving the tone and minimizing interference. Choosing the right length, connectors, and shielding, as well as considering your budget and specific needs, are key factors in selecting the best guitar patch cables for your setup.

Below you can find our editor's choice of the best quality guitar patch cables on the market

Audioblast - 3 Units - 2 Foot - HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Instrument Effects Pedal Patch Cable w/Eminence Straight & Angled Gold ¼ inch (6.35mm) TS Plugs & Double Boots

Based on 54 reviews Check latest price

Product description

3 Units - 2 Foot - Audioblast HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Bass Effects Instrument, Professional Patch Cable with Eminence E119 Angled and E120 Straight Gold plated 1/4 inch (6.35mm) 2-Pole Straight TS Connectors. Staggered hand assembled Double Boot protects the cable from damage by handling stresses - THE HQ-1 IS AN ULTRA-FLEXIBLE CABLE & CAN BE TWISTED EASILY BETWEEN YOUR PEDALS. IMPORTANT, PLEASE NOTE: The cable length is measured from TIP (Angled Plug) to TOP OF SLEEVE (Straight Plug) of each connector (the measurement details are clearly depicted in one of the images in the image gallery to further clarify the measurement process. There are many images in the gallery, please click on the main image to open the full gallery).

Audioblast HQ-1 is a flexible professional-grade instrument cable ideal for a myriad of patching applications. The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics. Low capacitance of the HQ-1 will always faithfully bring out the true tone of your instrument.
Audioblast cables are introduced to fill the need for a superior quality, professional-grade & affordable audio cable. Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank. We back this up with a 5 Year Replacement Warranty.
The brand of connector we used for this professional cable assembly: E119 (Angled) and E120 (Straight); offered by Eminence Connectors are professional-grade, 2-Pole, Long handle, ¼ inch TS plugs. Contacts are plated with premium Gold and sports a Black robust die-cast shell.
We at Audioblast guarantee that this is a professional-grade product, we are focused on bringing the highest value to our customers, we back all our gear with a no questions asked 5 year Replacement Warranty. Our pricing is really groundbreaking, please do not judge our products based on their low prices, please try us out and you will be pleasantly surprised, please do not forget to compare our gear with legacy brands (we will meet and exceed your expectations!).
This sale is for 3 patch cables (3 units), each cable is 2 Foot long. Cable length is measured from TIP (Angled Plug) to TOP OF SLEEVE (Straight Plug) of each connector (please refer to the image gallery). Staggered hand assembled Double Boot protects the cable from damage by handling stresses. 5 Year Replacement Warranty.

Guitar Patch Cables 6 Inch - Pedal Cable Kit 6 Pack - Best for Instrument Effects and Pedal Boards - Gold Plated Pedal Patch Cable Set - by The Three Musiceteers

The Three Musiceteers

Based on 90 reviews Check latest price

Product description

Guitar patch cables 6-pack with full warranty”

Instrument Effects Pedal Patch Cable by The The Three Musiceteers is angled from both ends – the cables fits perfectly to effect pedals and pedal boards.

This guitar pedal cable has a full metal casing, so it’s really reliable and strong, lasts many years to come without breaking.

All the guitar pedal patch cables are made with pancake style and are plated with gold color.

Our ultra flexible and dual shielded plugs offer great quality signal chain to your recordings and live performances without buzzing or other noises.

These patch cables work with all effects pedals, for example both guitar and bass pedals.

Our pedal board patch cables will provide you fun and memorable moments while enjoying the joy of music.

Guitar patch cable 6 inch for effects pedals comes in a quality box and makes a great gift.

Package includes 6 x chords and 1 x box.

SHIELDED PROFESSIONAL-GRADE INSTRUMENT CABLE PACK. These flexible low-noise cables offer top-grade studio quality sound for your recordings and live performances for both guitar and bass instruments.
PANCAKE STYLE 6 INCH PEDAL PATCH CORDS. The joints are hardwired with screws which makes them much more sturdy than the ones made from rubber. These cables will last long and does not broke easily.
GOLD PLATED PEDAL BOARD CABLE that has low capacitance provides the real tone of your instrument. The length of wire is 6 inches and total length is 8.5 inches.
WE PROVIDE A FULL WARRANTY. We monitor carefully the manufacturing process of our Pedal Patch Cable Kit, but if there happens to be something you are not satisfied, just let us know and we are happy to send you a new set or a full refund.
ALL "THE THREE MUSICETEERS" PRODUCTS ARE ALWAYS SOLD ONLY BY "THE THREE MUSICETEERS".

12 Inch x2 + 15 Inch x2 + 18 Inch x2 - Audioblast HQ-1 - Ultra Flexible -Dual Shielded (100%)- Instrument Effects Pedal Patch Cable w/Low-Profile, R/A Pancake TS (6.35mm) Plugs & Dual Staggered Boots

Based on 104 reviews Check latest price

Product description

12 Inch x2 + 15 Inch x2 + 18 Inch x2 - Audioblast HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Bass Effects Instrument, Pedal Patch Cable with Premium Nickel Plated ¼ inch (6.35mm) Low-Profile, Right Angled Pancake type TS Connectors & Dual Staggered Boots - THE HQ-1 IS AN ULTRA-FLEXIBLE CABLE & CAN BE TWISTED WHEN “S” SHAPED PATCH CONNECTIONS ARE CALLED FOR BETWEEN YOUR PEDALS. IMPORTANT, PLEASE NOTE: The cable length is measured from TIP to TIP of each connector, this is the industry standard for measuring patch cables (the measurement details are clearly depicted in one of the images in the image gallery to further clarify the measurement process. There are many images in the gallery, please click on the main image to open the full gallery). Please also check out the connector dimensions, as the pancake design might be too wide for jacks that are spaced close together. If the plugs are incompatible, please do an Amazon search for "AUDIOBLAST CABLES" or visit our Amazon store to see the whole range. We have the widest range of Gold or Nickel plated, Standard Straight and Right-Angled cables on the planet. We are certain we have the cables you seek.

Donner Guitar Patch Cables Right Angle 6 Inch 15 cm 1/4 Instrument Cables for Effect Pedals 6 Pack

Donner

Based on 381 reviews Check latest price

Save Space: Low-profile pancake right angle patch cable maximizes the space on the pedal board. Available Length:6 inch, 12 inch
Well Construction：All our custom made cables are professionally soldered with a Proprietary 4% Silver solder blend. Heavy-duty jacks protect cables to withstand frequent use. The cross-linked polyethylene dielectric is heat resistant and will not shrink as quickly as PVC
Bring out Clear Sound and Keep Noiseless: High purity copper shielding and copper center conductor ensure Donner pedal cords have extremely low capacitance, noise rejection and deliver true tone of instruments
Work Well on Versatile Instruments: Thousands of customers applied Donner pedal cables on their microphones, amplifiers, mixing consoles and other equipment and expressed their compliment about our quality, noiseless and space-saving features
Reliable Guitar Patch Cables: All of these pedal cables undergo extensive listening tests to ensure they meet Donner's standards of clarity, accuracy and quality. If you want great guitar pedal cable at a very affordable price, Donner Professional Guitar Effect Pedal Cable is your best choice

User questions & answers

Question:	What is the capacitance of this cable
Answer:	I switched to these: https://www.amazon.com/gp/product/B0188LY8E6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	Why are the 15 centimeter cables more expensive than the
Answer:	Great question? If I was to guess its supply and demand. The 15cm ( 6") are probably more in demand and the 30cm (12") are more in stock. They are a fantastic cable though and all I use period. No Noise No Mess workable cables too. The longer cables can be cut down to different lengths and re soldered. Sometimes you may need an 8" length...
Question:	Is it 21g copper conducted and shield
Answer:	yes and they are worth it :)
Question:	what is the warranty on these cables
Answer:	Thanks for your questions half an year warranty!

Guitar Patch Cable 12 inch, Devinal Instrument Effects Adapter Set 3 Pack, Pedal Boards Cord 1 feet kit, 1/4 Mono Right Angle Pancake Type Connectors, Ts Low-Profile Plug

Based on 160 reviews Check latest price

Product description

Devinal Low-profile Right-angle Guitar Patch Cable 3 pcs 12 inch

ABOUT DEVINAL

Got trouble of pedalboard spacing? Always need more room on your pedalboard? Now here's the solution! Devinal Flat Patch Cable is designed to reduce space on your pedalboard while still provides great sound quality.

Specification:

Connector : Pancake Type 1/4 mono plug;

Braid Shielding: 98.5% Coverage with 128 x 0.10 mm high density shielding;

Jacket Material: Environment-friendly Flexible PVC design by italy;

Gauge: 18 AWG oxygen free copper;

Outside Diameter: 6.0mm

Cable Length: 1 Feet / 12 inch (30 cm)

Package:

Devinal Instrument Effects Guitar Patch Cable * 3 pcs

Devinal Cable tie * 1pcs

PROFESSIONAL-GRADE INSTRUMENT CABLE - The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics.Low capacitance will always faithfully bring out the true tone of your instrument.
AFFORDABLE AUDIO CABLE - Superior quality, professional-grade & affordable audio cable, reasonable pricing for rugged professional stage and studio use, home users and enthusiasts alike
HEAVY-DUTY LOW-PROFILE PANCAKE TYPE - Staggered Hand-Assembled Double Boots for Extra Durability
PROFESSIONAL HIGH DENSITY SHIELDING - These flexible cables low-noise cables with Copper spiral shielding with 128 x 0.10 mm offer top-grade studio quality sound for your recordings and live performances for both guitar and bass instruments.
TOP QUALITY FLEXIBLE RUBBER JACKET - Design by italy and made by environment-friendly material improves high quality signal transfer. Polyethylene insulation improves high frequency response.

User questions & answers

Question:	are these cables a kit that you need to put together or are they assembled and ready for use
Answer:	Plug and play, no assembly requires. They are great.

Flat Low Profile Guitar Patch Cables 12 inch HONEST KIN Right Angle Guitar Pedal Cable 1/4 Inch Golden for Guitar Effects Pedal Board (12 Inch Patch Cable 3 Pack)

HONEST KIN

Based on 97 reviews Check latest price

♫ Heavy-Duty Low-Profile Pancake Plugs - Ours patch cables 1/4 with Staggered Hand-Assembled Double Boots for Extra Durability.
♫ Guitar Patch Cable from HONEST KIN made of 2319 Wires which Low Capacitance, Superb Noise Rejection and Pure Tone.
♫ Professional-grade instrument cable ideal for a myriad of patching applications. The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, these pedal cables cancelling almost all electrical interference & microphonics.
♫ These guitar pedal board cables with standard 1/4 inch right angle plugs gold plated, and Black PVC Jacket.
♫ Order these guitar pedal cables, you will get 3 pcs 12 inch high-quality guitar pedal patch cables and at least one year guarantee from HONEST KIN.

User questions & answers

Question:	Is there any noise in the guitar cable when it is used, and how is the instrument Lead Cable shielding effect
Answer:	The guitar cable uses oxygen-free copper as a conductor for better anti-interference performance. It not only has a strong and delicate sound quality, but also high fidelity and no noise.
Question:	Which instruments are connected to the guitar cable
Answer:	It's Suitable for many instruments, like electric bass guitar, amplifier, piano, keyboard to AMP or PA and other professional instruments.
Question:	what's the difference between this guitar patch cable 2319 and the
Answer:	Their is a considerable difference,mainly the capacitance. The low capacitance 2524 gives a brighter tone while the comparatively high capacitance 2319 gives a darker tone. So it depends on your preference.
Question:	All these guital cables have been test well before send out
Answer:	We have tested all the guitar cables and well packed before send out.You can buy it with confident.

Product features

Low-profile Right-angle to Same Guitar Patch Cable

HONEST KIN Guitar patch cables with standard 1/4 inch right-angle plugs
Heavy-Duty Low-Profile Pancake plugs with Staggered Hand-Assembled Double Boots for Extra Durability
Oxygen-Free-Copper(OFC) internal conductivity ensures extremely low noise and clear sound
HONEST KIN 12 inches long Guitar Patch Cables will be used for audio signal transmission of microphone, amplifier, mixing console, and other equipment
No doubt to be your best choice!

Specification

Length: 12inch /30cm (maybe a few inches out)
Plug Diameter: 1/4-inch/ 6.35mm
Outer diameter: OD6.0(mm)
Packages: 3 x Guitar Effect Pedal Cables (12 inches / 30 cm)

Monoprice Premier Series 1/4 Inch (TRS) Guitar Pedal Patch Cable Cord - 8 Inch - Black with Right Angle Connectors

Monoprice

Based on 307 reviews Check latest price

Product description

Connect your musical instruments and effects processors with this Premium 1/4" TRS Patch Cable with 90-degree connectors from Monoprice! This cable features 90-degree TRS/Stereo plugs on each end. It use s 16 AWG stranded pure copper conductors and employs copper braid shielding with 97. 5% coverage-Inch ensure that stray radio frequency and electromagnetic signals do not degrade the audio quality of your performance. The plugs are gold plated-Inch provide smooth corrosion-free connections as well as maximum electrical conductivity. With two separate conductors and the common shield ground this cable can be use d as an unbalanced stereo patch cable or as a balanced mono patch cable.

Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
16AWG stranded, pure copper conductors with copper braid shielding providing 97.5% coverage
Carries either a balanced mono or unbalanced stereo signal
90-degree 1/4" TRS male plugs at each end
Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.

User questions & answers

Question:	Need to connect my boss fs-6 switch to my rc-3 looper's stop/memeory switch jack. it requires stereo signal. will this work
Answer:	Yes, a 1/4 stereo phono connection is the same plug as a TRS 1/4 balanced cable (like a three pin XLR) the moral of the story is yes. You are good to go.
Question:	Need to connect my boss fs-6 switch to my rc-3 looper's stop/memeory switch jack. it requires stereo signal. will this work
Answer:	Yes, TRS cables are used for stereo signal (you can see three separate sections, Tip Ring and Shield, in the connector while mono only uses two Tip and Shield). I can confirm this is a TRS cable and should work for your setup.
Question:	Will this work for 3.5mm audio ports for smartphones
Answer:	This is a 1/4” plug on both ends. It will not plug into a smartphone jack unless you use a 1/4” female to 3.5mm male adapter. It’s also a pretty heavy duty cable to use for a smartphone and even with an adapter, the extra weight might stress the jack and break it. 3.5mm is sometimes called 1/8”
Question:	Worth buying
Answer:	Yes, if you need an instrument cable with 2 right angle TRS plugs. They are good and it's not easy to find alternative products from other manufacturers, so if you need it, then you don't have much choice anyway.

Audioblast - 2 Units - 3 Foot - HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Instrument Effects Pedal Patch Cable w/Eminence Right-Angled ¼ inch (6.35mm) TS Plugs & Double Staggered Boots

AUDIOBLAST CABLES, EMINENCE

Based on 73 reviews Check latest price

Product description

2 Units - 3 Foot - Audioblast HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Bass Effects Instrument, Professional Patch Cable with Eminence E112 Right-Angled Nickel plated 1/4 inch (6.35mm) 2-Pole TS Connectors. Staggered hand assembled Double Boot protects the cable from damage by handling stresses - THE HQ-1 IS AN ULTRA-FLEXIBLE CABLE & CAN BE TWISTED EASILY BETWEEN YOUR PEDALS. IMPORTANT, PLEASE NOTE: The cable length is measured from TIP to TIP of each connector (the measurement details are clearly depicted in one of the images in the image gallery to further clarify the measurement process. There are many images in the gallery, please click on the main image to open the full gallery).

Audioblast HQ-1 is a flexible professional-grade instrument cable ideal for a myriad of patching applications. The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics. Low capacitance of the HQ-1 will always faithfully bring out the true tone of your instrument.
Audioblast cables are introduced to fill the need for a superior quality, professional-grade & affordable audio cable. Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank. We back this up with a 5 Year Replacement Warranty.
The brand of connector we used for this professional cable assembly: E112 offered by Eminence Connectors is a professional-grade, 2-Pole, Right-Angled, ¼ inch TS plug. Contacts are plated with premium Nickel and sports a Nickel robust die-cast shell.
We at Audioblast guarantee that this is a professional-grade product, we are focused on bringing the highest value to our customers, we back all our gear with a no questions asked 5 year Replacement Warranty. Our pricing is really groundbreaking, please do not judge our products based on their low prices, please try us out and you will be pleasantly surprised, please do not forget to compare our gear with legacy brands (we will meet and exceed your expectations!).
This sale is for 2 patch cables (2 units), each cable is 3 Foot long. Cable length is measured from TIP (Angled Plug) to TIP (Angled Plug) of each connector (please refer to the image gallery). Staggered hand assembled Double Boot protects the cable from damage by handling stresses. 5 Year Replacement Warranty.

Audioblast - 2 Units - 5 Foot - HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Instrument Effects Pedal Patch Cable w/Eminence Straight & Angled Gold ¼ inch (6.35mm) TS Plugs & Double Boots

AUDIOBLAST CABLES, EMINENCE

Based on 6 reviews Check latest price

Product description

2 Units - 5 Foot - Audioblast HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Bass Effects Instrument, Professional Patch Cable with Eminence E119 Angled and E120 Straight Gold plated 1/4 inch (6.35mm) 2-Pole Straight TS Connectors. Staggered hand assembled Double Boot protects the cable from damage by handling stresses - THE HQ-1 IS AN ULTRA-FLEXIBLE CABLE & CAN BE TWISTED EASILY BETWEEN YOUR PEDALS. IMPORTANT, PLEASE NOTE: The cable length is measured from TIP (Angled Plug) to TOP OF SLEEVE (Straight Plug) of each connector (the measurement details are clearly depicted in one of the images in the image gallery to further clarify the measurement process. There are many images in the gallery, please click on the main image to open the full gallery).

Audioblast HQ-1 is a flexible professional-grade instrument cable ideal for a myriad of patching applications. The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics. Low capacitance of the HQ-1 will always faithfully bring out the true tone of your instrument.
Audioblast cables are introduced to fill the need for a superior quality, professional-grade & affordable audio cable. Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank. We back this up with a 5 Year Replacement Warranty.
The brand of connector we used for this professional cable assembly: E119 (Angled) and E120 (Straight); offered by Eminence Connectors are professional-grade, 2-Pole, Long handle, ¼ inch TS plugs. Contacts are plated with premium Gold and sports a Black robust die-cast shell.
We at Audioblast guarantee that this is a professional-grade product, we are focused on bringing the highest value to our customers, we back all our gear with a no questions asked 5 year Replacement Warranty. Our pricing is really groundbreaking, please do not judge our products based on their low prices, please try us out and you will be pleasantly surprised, please do not forget to compare our gear with legacy brands (we will meet and exceed your expectations!).
This sale is for 2 patch cables (2 units), each cable is 5 Foot long. Cable length is measured from TIP (Angled Plug) to TOP OF SLEEVE (Straight Plug) of each connector (please refer to the image gallery). Staggered hand assembled Double Boot protects the cable from damage by handling stresses. 5 Year Replacement Warranty.

Miracle Sound Guitar Patch Cable for Pedalboard Effects with Right Angle Plug 3-Pack Ideal Electric Guitar and Bass Livewire Cable (3 Feet)

Based on 748 reviews Check latest price

Get that ideal sound! The 1/4 inch thickness of the plug offers the best possible sound transfer thanks to its quality shielding. No more interference, rustling and other unwanted noises when you play!
Designed for excellence! The new In-Out technology ensures that there is minimal signal loss, as it ensures low capacitance. Perfect sound for an ideal price!
Durable and efficient! The 3 ft long guitar cables will suit most of your needs with minimal sound loss. The right angle plug is ideal for pedalboards. These cables will serve you for years!
Highest quality! The best cables are not determined by price, but by design and careful manufacturing. We ensure ideal sound without breaking the bank.

User questions & answers

Question:	Are these cables good fo guitar to amp or guitar to guitar tuner
Answer:	These worked great for me as a slightly longer patch. Sometimes longer cables just make a mess laying around. I have gone to amps and between pedals with these. Great value.

Audioblast - 2 Units - 30 Foot - HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Instrument Effects Pedal Patch Cable w/ Eminence Straight & Angled Gold ¼ inch (6.35mm) TS Plugs & Double Boots

Based on 24 reviews Check latest price

Product description

2 Units - 30 Foot - Audioblast HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Bass Effects Instrument, Professional Patch Cable with Eminence E119 Angled and E120 Straight Gold plated 1/4 inch (6.35mm) 2-Pole Straight TS Connectors. Staggered hand assembled Double Boot protects the cable from damage by handling stresses - THE HQ-1 IS AN ULTRA-FLEXIBLE CABLE & CAN BE TWISTED EASILY BETWEEN YOUR PEDALS. IMPORTANT, PLEASE NOTE: The cable length is measured from TIP (Angled Plug) to TOP OF SLEEVE (Straight Plug) of each connector (the measurement details are clearly depicted in one of the images in the image gallery to further clarify the measurement process. There are many images in the gallery, please click on the main image to open the full gallery).

Audioblast HQ-1 is a flexible professional-grade instrument cable ideal for a myriad of patching applications. The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics. Low capacitance of the HQ-1 will always faithfully bring out the true tone of your instrument.
Audioblast cables are introduced to fill the need for a superior quality, professional-grade & affordable audio cable. Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank. We back this up with a 5 Year Replacement Warranty.
The brand of connector we used for this professional cable assembly: E119 (Angled) and E120 (Straight); offered by Eminence Connectors are professional-grade, 2-Pole, Long handle, ¼ inch TS plugs. Contacts are plated with premium Gold and sports a Black robust die-cast shell.
We at Audioblast guarantee that this is a professional-grade product, we are focused on bringing the highest value to our customers, we back all our gear with a no questions asked 5 year Replacement Warranty. Our pricing is really groundbreaking, please do not judge our products based on their low prices, please try us out and you will be pleasantly surprised, please do not forget to compare our gear with legacy brands (we will meet and exceed your expectations!).
This sale is for 2 patch cables (2 units), each cable is 30 Foot long. Cable length is measured from TIP (Angled Plug) to TOP OF SLEEVE (Straight Plug) of each connector (please refer to the image gallery). Staggered hand assembled Double Boot protects the cable from damage by handling stresses. 5 Year Replacement Warranty.

User questions & answers

Question:	Is this a good cable to use with a bass guitar
Answer:	Hi Craig, Yes you can use these with either bass or guitar. Sadly Amazon's title character limit severely hampers our ability to display all the details in the title. Warm regards, AB
Question:	x 30ft cables or 30ft total (2x 15ft
Answer:	2 cables each at 30'
Question:	This can be used going from an amp to the instrument right? Also do you know if this can be used for going from a loudspeaker to a mixer
Answer:	Hello Gary, Thank you for being interested in our cables 😊 Please note that this is an instrument cable for line level signals only. For an example connecting your guitar to an amplifier. And these cables can be used from a mixer to a powered speaker, which are also connected by a line level signal. However, this cannot be used as a traditional speaker cable (to carry a high-powered signal to a passive speaker). We sincerely hope the above information will be useful to you. Warm regards, AB

Audioblast - 3 Units - 2 Foot - HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Instrument Effects Pedal Patch Cable w/Eminence Right-Angled ¼ inch (6.35mm) TS Plugs & Double Staggered Boots

Based on 88 reviews Check latest price

Product description

3 Units - 2 Foot - Audioblast HQ-1 - Ultra Flexible - Dual Shielded (100%) - Guitar Bass Effects Instrument, Professional Patch Cable with Eminence E112 Right-Angled Nickel plated 1/4 inch (6.35mm) 2-Pole TS Connectors. Staggered hand assembled Double Boot protects the cable from damage by handling stresses - THE HQ-1 IS AN ULTRA-FLEXIBLE CABLE & CAN BE TWISTED EASILY BETWEEN YOUR PEDALS. IMPORTANT, PLEASE NOTE: The cable length is measured from TIP to TIP of each connector (the measurement details are clearly depicted in one of the images in the image gallery to further clarify the measurement process. There are many images in the gallery, please click on the main image to open the full gallery).

Audioblast HQ-1 is a flexible professional-grade instrument cable ideal for a myriad of patching applications. The conductive PVC sub-shield, served shield & the ultra-pure Oxygen Free Copper core ensure higher levels of signal transparency & quality, cancelling almost all electrical interference & microphonics. Low capacitance of the HQ-1 will always faithfully bring out the true tone of your instrument.
Audioblast cables are introduced to fill the need for a superior quality, professional-grade & affordable audio cable. Although made for rugged professional stage and studio use our reasonable pricing means that home users and enthusiasts alike will now have the pleasure of using these high-end, professional-grade cables without breaking the bank. We back this up with a 5 Year Replacement Warranty.
The brand of connector we used for this professional cable assembly: E112 offered by Eminence Connectors is a professional-grade, 2-Pole, Right-Angled, ¼ inch TS plug. Contacts are plated with premium Nickel and sports a Nickel robust die-cast shell.
We at Audioblast guarantee that this is a professional-grade product, we are focused on bringing the highest value to our customers, we back all our gear with a no questions asked 5 year Replacement Warranty. Our pricing is really groundbreaking, please do not judge our products based on their low prices, please try us out and you will be pleasantly surprised, please do not forget to compare our gear with legacy brands (we will meet and exceed your expectations!).
This sale is for 3 patch cables (3 units), each cable is 2 Foot long. Cable length is measured from TIP (Angled Plug) to TIP (Angled Plug) of each connector (please refer to the image gallery). Staggered hand assembled Double Boot protects the cable from damage by handling stresses. 5 Year Replacement Warranty.

1/4 inch Cable 6FT, CableCreation 6.35mm to 6.35mm TRS Guitar Patch Cords/Instrument Cable for Keyboard, Amplifier, Guitar, Mixing Board, Pedalboards, Piano and More, 1.8M

CableCreation

Based on 1 reviews Check latest price

❤ [6FT Stereo 1/4 Cable ]: Professional Series Stereo Plugs, connect instruments such as synths, keyboards, Guitars, Amplifier, Mixing Board, Pedalboards, Piano, Behringer, Studio, Live Presentation, Yamaha Hs8, Boss Katana amp footswitch, DJ mixer, UHF Receiver, Rokit 5 Studio Monitors and other professional audio equipment.
❤ [Outstanding Sound Quality]: Oxygen-free copper provide maximum's conductivity and durability; Zinc alloy case ensure the Minimal signal loss.
❤ [Lightweigt & Tangle Free]: CableCreation guitar cord 6FT is made up of a durable PVC outer layer, flexible and durable for long usage.
❤ [Snug Fit]: 24K gold-plated heavy duty connectors fit with all of your 6.35mm devices which plug and remove easily.
❤ [What You Get]: CableCreation 1 pack x Guitar patch cable 6ft with 2 years of warranty and lifetime friendly customer services.

User questions & answers

Question:	Can i use this to connect my behringer powered speakers to my behringer 12 xenyx 1202fx 3 pin xlr mixer
Answer:	Dear Customer, Yes, you can use the 1/4'' TRS cable to connect the behringer powered speakers to mixer. Make sure that your devices have 6.35mm audio jack. Any further question, please feel free to contact us. Thanks!
Question:	will this connect my foot switch to my amp? told it needs stereo cable
Answer:	Yes this is a stereo cable. I use it to go from my Saffire pro 40 to my headphone mixer. Regular 1/4” guitar cable only gave me sound out of one channel. With this cable I get stereo and it works wonderfully! Surprisingly high quality, too.
Question:	Will this work to connect two PA's together
Answer:	I would say if it was a 1/4" mono
Question:	Will this work with a Kustom pa50 speaker
Answer:	NO,This item can't work with a Kustom pa50 speaker.We have the other can work.This is the seller product for your reference, https://www.amazon.com/CableCreation-3-5mm-Stereo-Cable-Black/dp/B01JY2FSII/ref=sr_1_1?s=electronics&ie=UTF8&qid=1504063790&sr=1-1&keywords=cx0059

Product features

24K Gold-plated Connectors

24K Gold-plated Connectors & Aluminium Alloy Shell ensure you get reliable and crisp sound. It seamlessly transmits stereo audio for high quality sound.