14 best realistic stereo receivers

Product description

Sherwood America RX-5502 AM/FM Receiver RX-5502 Stereo Receivers

• 25-Key Unified Remote Control
• Switching for four pairs of loudspeakers from the front panel or via remote control
• Multi-source, dual-zone capable for use as free-standing unit or a Zone 2/3 receiver/amplifier
• 100 watts x 4 in Multi-room mode
• Digital Encoder Volume Control
• 100 watts x 4 in Multi-room mode
• Multi-source, dual-zone capable for use as free-standing unit or a Zone 2/3 receiver/amplifier

User questions & answers

Question:	can I connect my sony 5 channel home theater system to this receiver
Answer:	There is switch on the drill to make it tighten or loosen.
Question:	hi, does this connect 4 pairs of 8 ohm speakers and work well? if yes how much power does it provide for 8 ohm speakers? thanks
Answer:	Huh? I don't see any mention of batteries in the product description. One of the big selling points of this toy set is that NO BATTERIES are needed! A mechanism in the drill rotates the bit when you press the trigger. The bit fits and actually turns the screws. So realistic and beautifully made!
Question:	I'm new to receivers. My house has three rooms prewired (basement, living room, outside) and want to know if this unit will play music in all 3 zones
Answer:	Yes, the drill will rotate inertially.
Question:	One of the folks here commented in their review that this unit would not allow you to source multiple zones from the same input source? Is that true
Answer:	The kids tool toy set is plastic. Smooth surroundings will not scratch children.

Product description

PyleHome Model : PTAU23 Mini Stereo Power Amplifier, 2 x 40 Watt Mini Stereo Power Amplifier - 2 x 40 Watt with USB, AUX, CD & Mic Inputs RCA REC Output 1/4" Phone Jack 1/4" MIC Input Jack USB Reader Function Power On LED Indicator 110/220 Voltage Selector AUX1, AUX2, CD & RCA Inputs 2 x 40 Watt Peak at 4-Ohm Four Push Type Speaker L/R Terminals Switchable MIC Pager and Mixing Modes Switchable AUX1, AUX2, CD, USB Inputs Bass, Treble, Balance, Master & Mic Volume Controls Dimensions:7.48"W x 2.72"H x 5.39"D Pyle PTAAU23 Home Amplifier is perfect for powering any stereo system. Complete with USB and AUX inputs, and 2 x 40 watts of power - this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality - this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

From the Manufacturer

• 2X40 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x40 watts power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
• 6 INPUTS: This personal digital amp box supports various external sources - 3 pairs RCA audio input for tuner, CD player, tape deck, or camcorder, 1/4" microphone IN, 1/4" headphone jack, AUX IN, USB. Also features a REC output for recording
• PAGER/MIXING MODE: The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session.Do not use harsh chemicals, solvents or detergents
• USB 2.0/SD CARD INPUT: The sound amplifying mixer device features a USB/SD card input to support flash drives or SD card. Allows you to play your favorite audio files from your computer's media library when you connect it directly to the amp
• EQ CONTROLS: The improved professional compact bookshelf sound amplifier features crisp and responsive buttons for power switch, MP3 controls - previous, next, play/pause. Rotary knob controls for input, MIC, balance, bass, treble, and master volume
• 2x40W 10% RMS at 4-ohm - Power ON LED Indicator - USB Reader Function
• 1/4" Phone Jack - MIC Volume Control - Master Volume Control

Product features

Home Audio Power Amplifier System

The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2 x 40 watts power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio

USB 2.0/SD CARD INPUT

The sound amplifying mixer device features a USB/SD card input to support flash drives or SD card. Allows you to play your favorite audio files from your computer's media library when you connect it directly to the amp

EQ CONTROLS

The improved professional compact bookshelf sound amplifier features crisp and responsive buttons for power switch, MP3 controls - previous, next, play/pause. Rotary knob controls for input, MIC, balance, bass, treble, and master volume

PAGER/MIXING MODE

The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session

6 INPUT

This personal digital amp box supports various external sources - 3 pairs RCA audio input for tuner, CD player, tape deck, or camcorder, 1/4" microphone IN, 1/4" headphone jack, AUX IN, USB. Also features a REC output for recording

Product description

Specifications:

FM Radio Dipole Antenna;

Feature: Indoor Wall Mounting;

Cable Length is 1.6m, Dipole Length: Each Approx.75cm;

Compatible with: Indoor Radio Tuner AV Audio Vedio Home Theater Receiver Stereo Receiver with Bluetooth Power Amplifier System Speaker Selector Music System;

Improves FM Radio Stereo Reception;

Net Weight: 48g;

Operating Temperature: -20°С ~ +80°С;

Storage Temperature: -30°С ~ +85°С;

• T shape FM Radio Antenna 300 Ohm Dipole Antenna with 2 bare wire Connector,for Indoor Home Radio Stereo Reception Tuner Receiver Amplifier Speaker, easy to install provide better replaecment.
• Compatible with Yamaha Pioneer Panasonic Onkyo Sony JVC Sherwood and more home stereo receiver radio receiver.
• This 300ohm 2-Pin bare wire FM antenna provide a better am radio solution for stereo receiver radios on table top, home, attic, office, garage, basement and so on.
• Note:before placing the order, please make sure your FM socket is the same as what we have mentioned.
• Package List: 1 x FM Dipole Antenna;Cable Length is 1.6m, Dipole Length: Each Approx.75cm;

User questions & answers

Question:	will this work on my 1980 old school Pioneer SX1280 receiver
Answer:	Actually 4 zones. Can pick from any combination of a thru d inclusive.The other review is WRONG.Total 8 speakers natively in 4 independant pairs.Single volume control for all but all 4 pairs can be on or off in any combo without a 'splitter'.Forget the remote. Too many buttons.Left button in the line on off (I leave in stby all the time) volume and scroll thru input are the only 3 buttons ive used and I own 2 of these.
Question:	Are the dimensions correct? 1600mm seems awfully long for the bottom portion
Answer:	as i understand it , one input source can go to either zone, but you cannot sendtwo different sources to different zones

Product description

PyleHome Model : PCA4 Compact Home Audio Amplifier, 2x120 WattCompact Home Audio Amplifier - Stereo Power Amp, AUX/MP3/RCA Input (2 x 120 Watt) Features: Compact and Powerful Mini Amplifier Front Panel Rotary Controls RCA Audio Input (L/R) Push Type Speaker L/R Terminals AUX (3.5mm) Input Connector Jack Connect & Stream Audio from External Devices Treble, Bass, Master Volume Adjustable Built-in Short Circuit and Power Surge Protection LED Indicator Light Output Level Display Technical Specs: Output Power: 2 x 120 Watt @ 4 Ohm Line Input Sensitivity: 220mv, 1kHz @ 4Ohm Frequency Response: 20Hz-20kHz S.N. Ratio: 75dB T.H.D.: 0.3% Tone Controls: +/-10dB Fuse: 1.5A, 250V Fast-Acting, 5x20mm Power Supply: 110/220V, Switch Selector Dimensions (L x W x H): 6.7’’ x 8.3’’ x 2.7’’ -inches The Pyle PCA4 Home Audio Amplifier is perfect for compact stereo system power. This small sized amp delivers maximum audio performance with universal device compatibility. Front panel rotary controls allow you to fine-tune your sound while the Aux (3.5mm) input jack give you the ability to connect and stream audio from your devices -- get connected and stream audio from MP3 Players, Smartphones, Computers and Laptops. The rear panel features push-type speaker connectors along with RCA (L/R) audio inputs. Add crisp and clear audio processing performance with the Pyle Compact Stereo Power Amplifier.

• 2x120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4-8 ohms impedance, enjoy high quality music & movies!
• MULTIPLE SOURCES: This personal portable digital amp box lets you connect external audio sources such as tuner, CD DVD player, tape deck, camcorder & VCR to the RCA L/R input & enjoy enhanced amplified acoustic audio reproduction!
• CD/MP3 AUX IN: The professional integrated stereo receiver features CD/MP3 3.5mm AUX input which lets you connect your PC (CD ROM), laptop computer, Walkman, iPod, iPhone, iPad, and cell phone.
• PUSH TYPE SPEAKER TERMINAL: It lets you easily connect speaker wires directly to the amplifier. The speaker impedance ranges from 4 to 8 Ohms for the general stereo output. The total speaker impedance must be at least 4-Ohm per channel at stereo mode
• EQ CONTROLS: The improved compact bookshelf speaker sound amplifier features crisp & responsive buttons for the power switch. It also features rotary knob controls for the master volume, bass & treble adjustments.
• WORRY-FREE SHOPPING: With the Pyle PCA4 updated version, we are confident of the quality of our product, therefore, we offer a 30-day money-back guarantee, no questions asked.
• 2x120W RMS at 4 Ohm - Master Volume Control

User questions & answers

Question:	How does this compare with the cheapo 2020 amp (the best of the little chinese amps
Answer:	Thank-you for your question. Your golf ball snaps into the top position of the holder after each hole. The separated lower magazine holds up to (2) additional provisional or practice balls, and are released through the bottom frame as needed. Note the top golf ball does not enter the magazine area during play. At Snakebelly Golf we perform extensive testing to make sure our golf ball holders securely retain balls in all course conditions, whether you walk or ride. Each Snakebelly golf ball holder leaves the factory with a secure 4-pound ball release, and goes through a 100% quality check before packaging. In other words, we take great pride in putting out a top quality golf product made entirely in the USA. To maintain the best performance for your Snakebelly golf ball holder be sure to use golf balls in good condition. If for any reason your golf ball holder is not performing exactly as described, please contact SnakeBelly Golf right away for assistance.
Question:	What is its power output at 8 ohms
Answer:	Yes they float.
Question:	Do the sub outputs have a crossover built in? If so what frequencies
Answer:	No idea and why does it possibly matter.
Question:	can i attach a cd changer to it
Answer:	No idea and it is irrelevant to their performance.

Product features

Pyle Home 2x120 Watt Audio Speaker Power Amplifier

This home amplifier is perfect for powering any stereo system. Using sophisticated circuitry and premium components for uncompromising musicality. This product is famous for delivering powerful and accurate sound. Complete with 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. This small but powerful amp delivers clear and crisp audio for its listener. Durable and affordable, this amp is made to last.

Pyle Home 150-Watt Stereo Mini Power Amplifier

This mini stereo power amplifier provides up to 75 W of power on each channel at 4 ohms. It's compatible with any audio or computer device - you can even hook up an iPod using a 3.5mm to RCA jack converter. Connect your inputs using the RCA jacks. Outputs over standard speaker push jacks. Treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. Runs on 110 or 220 V.

Pyle Home 2X40-Watt Stereo Mini Power Amplifier

This mini stereo power amplifier provides up to 40 W of power on each channel at 4 ohms. It's compatible with any audio or computer device - you can even hook up an iPod using a 3.5mm to RCA jack converter. Connect your inputs using the RCA jacks. Outputs over standard speaker push jacks. Treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. Runs on 110 or 220 V.

• 2 CH stereo output power 50watt * 2, working voltage range DC5-24V, for 4-8Ω, 50watt-200watt passive speakers.
• This Bluetooth amplifier board has a bottom plate and a top plate. The guard plate is also an indicator, easy to set up.
• Advanced circuitry design, support reverse connection protection, Over-voltage protection, under-voltage protection, Over-heat protection, Short-circuit protection.
• It is recommended to use a DC15V-24V power adapter with a current above 2A. Please use a power adapter with sufficient power to connect the amplifier board, otherwise the sound will be distorted.
• 18 months warranty and lifetime technical support. If you have any questions, please feel free to contact us.

User questions & answers

Question:	Can i use only one speaker? Is the bridged mono channel possible? I think i might use one wide range driver
Answer:	Works on my 1970 Pioneer receiver. So I don’t know why not.
Question:	Is there any turn on pop
Answer:	The bottom wire is ~4ft long (~1200 mm)
Question:	Do you use a thermal adhesive of some sort to attach the heatsink
Answer:	It depends. This is a stereo (2 channel) receiver/amplifier. If your theater system has a stereo out, then yes you can. If it only outputs through a digital output (optical, hdmi, coax, etc.), then no you cannot. If you do connect it, you will not have surround sound, only 2-channel stereo.
Question:	Is there a version with 3.5mm output
Answer:	I have 4 pairs connected. I assume they are 8 ohm. It works fine. Not super powerful but it drives all 4 at once no problem. This is not a unit for audio geeks thus the price. I bought it because I have speakers in multiple rooms and it works admirably.

Product features

Bluetooth 5.0 Mini Power Amplifier Board

Model: ZK-502L; Input Mode: Bluetooth

Work Voltage: DC 5V-24V(Above 2A)

Channel: 2 CH Stereo Output

Bluetooth version: Bluetooth 5.0

Bluetooth transmission distance: 50 Ft

MAX Power Output: 50W x 2

Terminating Impedance: 4 Ohm-8 Ohm

Match Speaker: 30watt-200watt

Work Humidity:0%~95%RH

DC socket: 5.5*2.1mm

How to connect the speaker?

• Step1-Use the screwdriver to loosen the speaker terminals on the amplifier.
• Step2-Insert the speaker wires.
• Step3-Install the screws to secure the speaker wires.

Package Includes:

1. ZK-502L Stereo Bluetooth Power Amplifier Module * 1

2. Acrylic shell * 2

3. 12mm Copper column * 4; 4. 8mm Screw * 8

5. Steel nut, screw mat * 1

6. 20cm power cable * 1

7. Screwdriver * 1; 8. Knob * 1

Product description

Bluetooth hybrid amplifier Receiver - home theater stereo amplifier with Bluetooth wireless streaming, AM/FM radio, MP3/USB reader (3000 watt max)



features:

home theater Pro audio receiver> high-powered hybrid pre-amplifier

multi-channel source audio selection> built-in Bluetooth for wireless Music Streaming> AM/FM radio with digital LCD display> USB flash memory card readers> MP3 audio file playback Support

connect & Stream Audio from external devices> aux (3.5mm) input jack

microphone inputs, 1/4’’ -inch> headphone jack, 1/4’’ -inch> RCA (L/R) audio Input/output jacks

dedicated for subwoofer output> Screw-Type speaker terminal binding posts

front panel button & rotary control center> independent audio source selection> LED backlight illumination with key control on/off> microphone volume/echo controls> integrated overload & short circuitry protection> built-in cooling fan

universal rack mount design



bluetooth connectivity:

built-in receiver for wireless audio music streaming> simple & Hassle-Free Pairing> Works with all of today’s latest devices> (smartphones, tablets, Laptops, Computers, etc.)

Bluetooth Version: 5.0

Bluetooth Network Name: ‘Pyle pro’

wireless Range: 35’+ ft.



what’s in the box:

hybrid pre-amplifier

detachable rack-mount Brackets

AM/FM antennae> remote controls> power cable



technical specs:

power output: 3000 Watt max> Frequency response: 40hz-15 kHz, +/-2db

S/N ratio: >76db

T.H.D.: <1%

radio station memory presets: 30

digital media file playback support: MP3/WMA/WAV/FLAC/ape

maximum USB Flash memory support: up to 64gb

battery operated remote, requires x ‘AAA’ battery, not included> power cord length: 4.5’ ft.

power supply: 120/240V, Switchable> unit Dimensions (L x w x H): 16.9’’ x 3.5’’ x 11.8’’ – inches> Sold as: unit

weight: 19.24 lbs.

• 3000 WATT POWER: The stereo receiver amplifier for home theater system gives you 3000 watts max power w/ 1500W RMS and can support 2 sets of speaker for a high quality amplified audio. Perfect for karaoke & home theater acoustic surround sound system
• 5 INPUTS: This home audio amplifier is equipped with two 1/4" microphone IN, AUX MP3 jack, USB/SD IN, and RCA for CD/DVD player. It also has a headphone jack and AM/FM radio w/ 30 radio station memory presets
• BLUETOOTH CONNECTIVITY: Pyle bluetooth stereo amplifier receiver is compatible with bluetooth w/ 35+ ft wireless range and works w/ today’s latest devices including smart phone, iPad, tablet, iPhone and laptop w/ hassle-free receiver pairing
• SPEAKER SELECTOR: The home stereo amp wireless speaker receiver has A/B speaker selector enabling you to choose between A and B or both AB speakers set. You can also control the master volume, bass, treble, balance and echo to your desired level
• FRONT CONTROL PANEL: This home speaker amplifier home audio bluetooth receiver features a front panel button & rotary control center w/ digital LCD display for operation. Also comes w/ antenna & remote control for distant audio adjustment

User questions & answers

Question:	is this a stand alone high power amp to power a set of Bose 901 speakers
Answer:	Hi, the unit can hold up to 3000 watts (750 watts/channel) You may use the Sub Output port for powered speakers or subwoofer. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box P3301BAT for more details. Thank you.
Question:	Can you talk or sing over every input with the microphone
Answer:	They never sent me my free one I was supposed to get
Question:	Can the preout and sub output be used at the same time
Answer:	Yes the pre outs can be used to incorporate a second amp and the sub outs can send a mono signal to at least 2 powered subs. 1 from the right and 1 from the left sub out rca plugs ( red+black/white)
Question:	Do i need an audio reciever to use this amp
Answer:	at your P3301bat bat amp. Input your audio source ( CD- tape deck etc. ) To the p3301bat input. (CD ) Then line out from the Pyle P3301bat pre out jacks ( rca) to input of second amp. ( CD- aux. etc.) Connect a powered subwoofer to either 1 of 2 ( sub out r+l ) connect at least 2 ( r+ l ) stereo speakers to either channel 1 or 2. ( And yes banana plugs will work ) black + red screw connectors. I recommend using only 1 set of speakers with this amp. From your second amp connect a second pair of stereo speakers. And if the second amp has a sub. Out. Then connect a second powered subwoofer. to the second amp. Make sure both amps are at a low volume. Start input sound source adjust the bass treble and balance of both amps to your liking. Turn up the volume of the second amp. ( or slave amp ) while the audio is on turn up the volume of the P3301bat. Now set the slave amps volume to your liking. Then increase the volume of the P3301bat. As you turn that volume up the slave amps volume will increase until you have reached the volume you set it at. If not enough slowly increase the second amps volume, then the P3301bat volume and the slave amp until desired volume is achieved. Now having done all that the primary amp ( P3301bat ) will act as your master volume. ( increase that volume and the slave amps volume will increase + vica, versa) To turn the system on 1- turn on audio source, 2- turn on slave amp. 3 - turn on the P3301bat.. To power off all ways shut down the P3301bat 1st. Or the above sequence in reverse. Try to use the most of highest volume from the slave amp. Doing this will stop power surge to the P3301bat that can blow the amp with a loud thumping pop. I hope this helps. This is the set up I use to practice my drums. If you are going to run the amps at high volumes for extended periods. About every hour or so turn down the volume and let the amps cool for a few minutes. I also use an external fan blowing behind and across the rear and top of the amps as the built in cooling fans are not enough for very high volumes for periods of 2 hours of more. All ways have a cool down period I hope this helps

Product features

Multi Channel Bluetooth Preamplifier Receiver

The Pyle multi-channel hybrid preamplifier receiver is perfect for your home entertainment system. Gives you 2000 watts peak power to be used for multi speaker w/ 2-8 ohms impedance allowing you to enjoy high quality amplified audio

EQ CONTROLS

The home amplifier with bluetooth has crisp buttons for audio sources and selector, rotary knob for equalization, echo, bass, treble, microphone and master volume adjustments. Also features LED backlight illumination w/ dimmer control.

DISPLAY METER

The rack mount home theater system receiver has a built-in digital LCD display w/ front panel control center. Equipped w/ built-in cooling fan and integrated overload short circuitry.

7 INPUTS

The pro audio digital amp box supports headphone, dual USB, SD card, MP3, FM tuner, AUX, CD player, 2 microphone input w/ echo for karaoke or event hosting, RCA audio input and output dedicated for subwoofer w/ screw-type speaker terminals.

• Android Car Stereo: 228(L)*130(H)*80(W) mm, 9 inch 2.5D tempered glass mirror with double USB adapter input. Support car original steering wheel control button learning
• Bluetooth & FM Radio: built-in Bluetooth with A2DP, support hands free call, phone book download and music play. with 30 preset stations, which can search channels in full-automatic ways
• WiFi & GPS Navigation: Connect to Wifi or Hotspot from your phone, you can download apps for store, watch video online, use navigation online. Map of North American has been pre-downloaded to the unit, offline map also be supported
• Updated Mirror Link Function: connect phone to the unit via WiFi or USB line, Supports IOS phone (5s-7plugs) one-way projection to the machine, Android phone(4.0-7.0) two-way connection
• Rear View Camera Input: rear image will automatically shows on the screen of car stereo when you are backing your car. 【Multiple Functions】Multi-format audio and video recoding; Support 1080P full format; Brightness adjustment, Subwoofer audio output, Original steering wheel remote control

Product features

10.1 Inch Big Screen

• 2.5D Radian
• Scratch Prevention
• High Temperature Protection

Digital FM Radio

• FM Range: 87.5~108MHz
• With 18 Preset Stations

Mirror Link

• For Andorid(4.0-7.0) and iOS(5s-7 Plus) phone
• For Android: two-way control, for iOS: one-way projection to the car stereo

Bluetooth with A2DP

• Built-in Microphone
• For hands-free call, phonebook download, music play

GPS Navigation & WiFi Connect

• Built-in offline map
• Connected wifi, you can use online map

Original Steering Wheel Control

• Support original car steering wheel learning
• This function doesn't work if cars need a canbus

Backup Camera Video Input

Waterproof Night Vision Backup Camera Incluede

• 1. Camera's power cable: red and black.
• --- Red connect to reverse light positive, black to reverse light negative.
• 2. Camera's RCA cable: yellow port.
• ---- Insert into CAMIN port (yellow) on the radio
• 3. Trigger cable: cable named "reversing control" on the radio backside harness, according to the wiring diagram label on machine bottom. .
• --- Connect this cable to reverse light positive wire of the car.

• 192Khz DAC Digital to Analog ： Bulit-in High-performance DAC chip and supports digital audio signal convert to analog audio signals,sampling rate up to 192Khz/24Bit.
• Bluetooth 5.0 high fidelity power amplifier ： Advanced Bluetooth 5.0 transmission technology, 12-meter transmission distance, stable connection, continuous line low delay,You can easily play your favorite songs in the mobile phone via bluetooth 5.0 function
• Easy Connection & Volume Adjustment ：Simple connection steps, the input end is connected to the audio signal source, the output end is connected to the speaker.Side design volume control button, you can adjust the amplifier volume according to the environment and mood.
• Multiple-Input ：Combination of Class D Amplifier ，Supports Optical/Coaxial/AUX/USB audio input ( Only supports USB Disk )/Bluetooth input ，just press the "mode" button to switch input signal easily .Allows you to choose different input devices,Plug and Play,No need installation.
• Home integrated digital amplifier ：30W RMS X 2(4 & 6 & 8 ohms 20 Hz - 20 kHz, 0.04% THD), drive 4 & 6 & 8 ohm speaker directly，comes with 19V power supply ，includes 1 x Bluetooth HIFI Amplifier,1 x 19V Power Adapter and 1 x User Manual .( Just feel free to contact us on Amazon if you have any questions about the item)

User questions & answers

Question:	How to switch the input signal port
Answer:	I have not experienced any turn-on pops.
Question:	Is good for for 2 extra surround speakers
Answer:	Yes.
Question:	Can i connect powered speakers to the rca port of the audio amplifier
Answer:	Not an output. Only an input.

Product features

Introduction：

This product converts optical, coaxial, and Bluetooth digital audio signals into stereo analog audio signals and supports 192K / 24bit HIFI stereo amplification. Help users solve the problem of connecting different audio interfaces with analog amplifiers, and make the music signal expression more natural, more realistic, Closer to the source sound quality, providing a perfect music experience for the majority of music enthusiasts.

Bluetooth Receiving Function:

When you need to use the Bluetooth receiver function, you can press button to switch Bluetooth input channel and open the mobile phone to search for “AY-BT” after Bluetooth.

USB Audio Input Interface:（This interface only supports U disk playback, not computer）

When you need to use the USB function, you can press the button to switch the USB input channel. Connect the USB device to the amplifier (USB format only supports FAT32, not NTFS format).

Connection and Operation：

1. Connect the source device to the converter using optical or coaxial cable.

2. Use the RCA cable to connect the converter output connector to the analog amplifier's input or use the headphone cable to connect to the converter's 3.5mm audio interface.

3. Use a USB flash drive to connect to the USB interface of this product.

4. Connect the DC19V adapter to the DC19V power connector, and then connect the adapter to the power socket after checking it.

Effective use distance of Bluetooth function:

Advanced Bluetooth 5.0 transmission technology, 12-meter transmission distance, stable connection, continuous line low delay,You can easily play your favorite songs in the mobile phone via bluetooth 5.0 function

Signal Switch Button:

Press the button to switch the input channel, and the input signal indicator will stay at the current signal input port you selected.

Special Notice:

Special Notice:

1. Please plug the power cord into the amp then the AC outlet.

2. Please select the corresponding input channel by press button on the amplifier.

3. For passive speakers only, not the powered speakers.

4. When using fiber optical or coaxial as the input source, set the audio format of the input device to PCM.

5.Setting Path: Device Home Page - System Settings - Image & Sound - Sound Settings - Digital Audio Output - PCM/LPCM

Product description

Product Features:

Bluetooth 5.0 Version

High Sensitivity Microphone

Creative small device 

Product specification:

Name: PALOVUE Bluetooth 5.0 Audio Adapter

Qualcomm:  QCC3008

BT 5.0: Support. HFP / A2DP / A VRCP

apt‐X: Support  Quacomm aptX / aptX LL

SNR: 92dB

Power Supply: 5V 500mA

Temperature: -10℃~50℃

BT version: 5.0

Humidity: ≤90%

Weight: 9g

Length: 520 mm

FCC: Support

USB audio: Support

LED: Blue

CVC: Support CBC 1Mic HF 8th Gen

Product  Installation Guide:

1. Connect the USB power supply port of the product to the charger and power on automatically.

2. Connect the 3.5mm audio jack to your speaker or car via AUX port.

Product Connection Guide:

1. The Audio Adapter will automatically enter pairing mode once power on.

2. Open the Bluetooth function on your mobile phone or tablet and click search.

3. Click“Palovue LinkFlow” once appear.

4. The Audio Adapter will automatically re-connect next time once power on.

Note: 

The pairing mode lasts only 10 minutes. After 10 minutes, the LED lights will enter the slow flash standby mode. If you need to enter the pairing mode, please restart the product after power failure.

• Qualcomm CSR and Bluetooth 5.0: Adopting Low Latency technology, ensure instant pairing and maintains a strong wireless connection and deliver high-fidelity stereo sound with no delay, help enjoy music streaming wirelessly in your car/home.
• Easy To Use: PALOVUE wireless audio adapter built-in microphone, enjoy Bluetooth play music and hands-free calling, delivering the authentic and smoothest sound for you; Plug N play and charged directly through the USB and the 3.5mm port while plug-in car/home stereo
• AUTO-ON & AUTO-CONNECT: Auto on/off when you start/stall your engine , reducing power loss and protecting the car and products; Connect as soon as Bluetooth is switched on and auto-connects to the last device used, no need to connect repeatedly.
• Exquisite Design: The USB port and the 3.5mm aux interface and braided cable all adopt advanced craftsmanship, minimize the loss of sound transmission and make the sound of music or calls the most realistic, and help enjoy a richer and deeper sound experience.
• Super Compatibility: Connect with Linkflow as long as the mobile device has Bluetooth capability, help enjoy high-fidelity stereo music and clear speech wirelessly in your car/home, and control easily; Compatible with all the car widely, keep your car audio system looking sleek thanks to its compact and stylish design.

User questions & answers

Question:	How is this product installed
Answer:	Hello, you can switch the signal source port through the "MODE" button of the amplifier.
Question:	Can I control the music from the streering wheel
Answer:	With bannana to rca splitters I'm running 10 speakers
Question:	Will the product be large and take up space
Answer:	Hello, the R/L port of this audio amplifier is the signal input port. This product can only be connected to passive speakers.
Question:	Will the sound quality really change significantly? How good has it become
Answer:	Don't know about that. I would think you would want to put a load on both channels for continuous use though.

Product features

Powerful Bluetooth V5.0

PALOVUE Bluetooth receiver allows you to connect to different portable devices wirelessly, to adapt to every need.

With the enhanced Bluetooth 5.0 chipset, it can provide more stable audio, there are no delays between sound and image, so you can watch TV/movie/video/calling in perfect.

Hands-free Calls & Voice Assistant

Hands-free calls and voice assistant liberate your hands to focus more on driving. Built-in mic helps you focus more on driving and enjoy hands-free calls, GPS navigation, and Siri assistant. Safer driving makes you and your family relieved.

Intelligent Connectivity

Just plug, pair and play, it will reconnect the last paired one automatically next time. Freely switch music or phone calls between 2 devices. No need charging and you can enjoy the audio all the time.

Product Connection Guide:

1. The Audio Adapter will automatically enter pairing mode once power on.

2. Open the Bluetooth function on your mobile phone or tablet and click search.

3. Click“Palovue LinkFlow” once appear.

4. The Audio Adapter will re-connect next time once power on automatically.

NOTE: The pairing mode lasts only 10 minutes. After 10 minutes, the LED lights will enter the slow flash standby mode. If you need to enter the pairing mode, please restart the product after power failure.

Product description

Features: - Compact and Powerful Mini Amp System - Bluetooth Receiver for Wireless Audio Streaming Ability - RCA (L/R) Audio Input - USB/SD/FM playing - Connect & Stream Audio from External Devices - Push-Type Speaker L/R Terminals - Front Panel Rotary Controls - Power ON / OFF Switch - LED Indicator Light - Configurable Treble, Bass and Volume Adjustment - LED Display - With Bluetooth Antenna to Improve Bluetooth Distance - With FM Antenna to Improve FM Sensitivity - MIC Input Bluetooth Wireless Connectivity: - Simple & Hassle-Free Pairing Ability - Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.) - Bluetooth Network Name: ‘PyleUSA’ - Bluetooth Version: 4.2 - Wireless Range: 40’+ ft. What's in the Box: - Stereo Amplifier System - Remote Control Technical Specs: - Power Supply: 100WX2 Max - 10% RMS at 8-Ohm Impedance: 8WX2 - Signal-to-Noise Ratio: 75dB - Input Sensitivity: 200mV - T.H.D.: 0.1% - Signal-to-Noise Ratio: 75dB - Power Cable Length: 4.9’ ft. - Tone Controls: Bass & Treble: +/-10dB (100Hz/10kHz) - Power Fuse: 1 A, 250V Fast-Acting (5 x 20mm) - Battery Operated Remote, Requires x CR-2025 Button Cell Battery, Included - Dimensions (W x H x D): 7'' x 6.2'' x 2.4'' -inches

• 200 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your karaoke and home theater acoustic sound system. It gives you 200W power w/ 100W RMS, accommodates 2 sets of speakers, allow you to enjoy high quality amplified audio
• 5 INPUTS: This personal digital amp box supports various external sources. Features 1 RCA audio input for tuner, CD player, tape deck, 2 1/4" microphone IN, USB, SD card slot & Bluetooth/FM radio antenna to improve FM sensitivity & bluetooth distance
• BLUETOOTH CONNECTIVITY: The sound amplifying mixer device is equipped w/ Bluetooth wireless music streaming. Works w/ today’s latest devices including smart phones, tablets, iPhone and computer w/ hassle-free receiver pairing
• EQ CONTROLS: The improved professional compact & powerful mini amp system features crisp, responsive buttons for mode controls & power ON/OFF switch. Equipped with rotary knob controls for microphone volume, bass, treble, and master volume
• DISPLAY METER: The compact and integrated indoor AV receiver has a built-in digital LED display showing input mode, track and folder name. FM antenna and remote control are also included in the package for distant audio adjustments

Product description

Kenwood Kna-RCDv331 Multimedia Ir Remote With Navigation Functions

• Compatible With Ddx516, Kvt-516, Ddx616, Excelon Kvt-696 & Excelon Ddx896 2010 Kenwood Receivers
• Enables Kenwood Receiver To Be Controlled Remotely
• Switches For Audio, DVD, Tv & Navigation Modes
• Full Function Remote For Complete Control Of The A/V Receivers
• Requires 3 Aaa Batteries

User questions & answers

Question:	Will this work with ddx
Answer:	The installation is really easy, you only need to plug the USB port and 3.5mm aux port into the device separately, and then connect it and you are ready to use. Rest assured, you will definitely use it. The operation is very simple and convenient.
Question:	Would it work with DDX -25bt
Answer:	You can control the volumn, but can not choose music or skip song from another.
Question:	will it work with the DDX5eX
Answer:	NO, this Bluetooth receiver is actually very small and looks good. It really matches the decoration style of my house.
Question:	Is this IR? Is there a good steering wheel universal remote to give basic playback controls
Answer:	Yes, the sound quality after using this product is really very good. As the seller mentioned on the product page, their product uses a dual-chip design. CSR and DAC Chip. Such advanced technology has created such good sound quality and quality. I think you are worth trying.

Product description

High-Gain Stereo Amp/Preamp With 20dB Gain + Volume Controller

This mini compact stereo amplifier is designed to boost the output of virtually any line level audio source such as TV audio, video games, MP3 players, iPod etc with additional 20 dB boost.

This amplifier supports connection with all different type of audio source equipments that output in RCA L/R, 3.5mm stereo mini type or 5-Pin DIN type. The boost level or volume control is easily and manually adjustable from the rotary dial on the front panel.

This high-gain low-noise amp/pre-amp is ideal for both home and professional studio, computer multimedia production, karaoke and mixer application.

Line Level Source Matching For Optimum Performance

This mini amp provides users with an excellent solution for matching the sonic level from iPod, MP3/MP4, iPad, Tablet, CD player and mobile devices with Hi-Fi system, audio receiver, computer, loud speakers.

Adjustable Gain Control For Long Cable Run

This mini amplifier provides up to 20dB boost for audio signal to be transmitted over long cable wire without loss of quality and overcome signal level losses caused the cabling.

External Volume Controller

This unit can also be used to provide an external way of volume control for any audio source device or stereo amplifier that has no output level or volume adjustment of its own.

A volume control dial for variable line level output is located on the front panel.

Multiple Audio Inputs

This rugged compact stereo preamp/amplifier is featured with multiple audio inputs for connection with multiple audio sources:

• RCA stereo L/R x 1
• Auxiliary 3.5mm min stereo Input x 1[Note: This 3.5mm input on front panel will disable the stereo RCA L/R input from the back when used)
• Aux 5- DIN input x 1

• Quality preamp or mini amp with adjustable amplification max 20dB. Built-in high-end amplification circuits with ultra low-noise audio operation for outstanding performance. Featured with multiple audio inputs including 1 RCA stereo L/R, 1 Auxiliary 3.5mm headphone Input, 1 5-Pin DIN input.
• Boosting the output from low-volume audio sources such as tape player, potable CD player, MP3, TV or computer. Correcting the sonic mismatch issues that often cause portable players to be lower in volume than other home audio devices, resulting in distorted sound performance. Increasing the volume level for mixer or speaker setup, karaoke, audio recording, party, live stage event.
• Helping installation with longer cable run between audio components. Adjustable gain to boost low-level audio inputs to the level needed to drive amplifier or receiver properly. Excellent solution for matching the sonic level from iPod, MP3/MP4, iPad, Tablet, CD player with Hi-Fi system, audio receiver, computer, loud speakers.
• Provides low-noise floor and high musical accuracy for listening and recording. Used as amplifier for karaoke players or CD/DVD player to transform your stereo music to thrilled sound for party or outdoor events. Provide an external way of volume control for any audio source device or stereo amplifier that has no output level or volume adjustment of its own.
• Compact and all-metal design for durability and shielding the electronics from electromagnetic interference with noise rejection. 110V AC/DC power adapter included.

User questions & answers

Question:	Can I use this to boost a dvd/vcr player that is going into a tv? The sound level over the attached soundbar is significantly lower than the tv sound
Answer:	yes this will work for your head unit
Question:	If I connect two units in a chain, can I get a 40dB gain without any distortion
Answer:	That 1 I'm not sure about I would suggest that you going to the kenwood website and ask them and then you'll have a better idea
Question:	Does this unit come with specifications? Signal to noise ratio, channel separation, distortion, etc
Answer:	Yes... Works with all Kenwood units that use remote control...
Question:	can you connect this unit between a wireless headphone RF transmitter and a tv source to further increase final output volume
Answer:	Yes it is IR.

Product description

Yamaha, the most trusted brand in home audio, adds Bluetooth compatibility in this Hi-Fi receiver for easy wireless access to streaming music services and music on your smartphone or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha Natural Sound.? Frequency Response: 10 Hz – 100 kHz (0 ± 0.5 dB / 0 ± 3.0 dB).

• Advanced circuitry design
• Bluetooth to your favorite streaming music services
• 40 station FM/AM preset tuning; Frequency Response: 10Hz – 100kHz (0 plus/ minus 0.5 dB / 0 plus/ minus 3.0 dB)
• Brushed aluminum finish and simplistic design
• Speaker selector for 2 systems. Input Sensitivity (CD): 500 MV/47k ohms

User questions & answers

Question:	Even though there is no subwoofer output, can one be connected anyway
Answer:	NO!! There are line out jacks but they are fixed, not variable. This means when you turn the volume knob up and down, the volume to the subwoofer stays the same level. See page 10 of the manual here: https://usa.yamaha.com/files/download/other_assets/2/794512/web_ZU46020_R-S202_om_UA_En.pdf
Question:	What is the Bluetooth range
Answer:	There are 3 classes of BT devices. The ranges are under 10m (Class3); 10m (Class2) and 100m (Class3). The range you get between two devices will be the range of the least powerful device. If that's a cell phone streaming music, expect less than ten meters. If it is a computer with a Class2 BT radio, expect a solid ten meters. But the only way you will get more than ten meters (30 feet) reliably, is if both devices are Class 3. And portable devices rarely are.
Question:	can i hook up my turmtable as well
Answer:	I have a question more than answer. My turntable is the rather cheap, ION LP mp3 converter, it has a built in preamp, has a pair of red white RCA output. BUT, WHEN I PLUG IT INTO THE #3 RCA PORT, AS INDICATED ON THE PRODUCT PAGE FOR TURNTABLE, the speakers have no sound. Now, my "speaker" is a Yamaha HS5 monitor, it's hooked to the OUT RCA port via a 1/4" jack at the back of the monitor. I suppose I'll have to use proper hi-fi speakers connected via the loose wire ports?
Question:	So can this fit a total of 4 100watt speakers at once OR 4 25watt speakers at most
Answer:	100 "X" multiplied by 4 = 400 watts max, and multiple speakers can be connected to single channels if you have a full understanding of OHM's and how the wattage changes with different connections, but a single speaker on each channel that matches up closely at least in OHM's and watts will sound best, but multiple 25watt speakers would be fine on a 100watt channel, and with 4-100watt channels that can be repeated if desired, but if that's done with high power low ohm speakers, they will over draw power and burn up the reciever/amplifier and all this information is found via browser search, or just go basic and match printed numbers and sound great and dont worry about it burning up because of something you did.

Product features

The Delight is in the Details

The R-S202 gives you Yamaha’s 125 years of music heritage packaged to reproduce music as it would be experienced live. Bluetooth connectivity adds easy access to streaming music.

Each detail of this receiver was optimized for maximum power and minimal interference. The power transformer was positioned near the amp circuit for peak power supply. The signal ground and power supply ground connect at one point, achieving a higher S/N ratio.

Sleek Design

Less is more. Brushed aluminum finish gives an understated luxury feel that will last in form and function for years to come.

Product description

An Amazon Brand

• Adapter cable connects a smartphone, tablet, or MP3 player to a speaker, stereo receiver, or other RCA-enabled device
• 3.5mm Male connector on one end and two Male RCA connectors on the other end
• Works with left and right audio input and devices with a standard 3.5mm auxiliary jack (typically used for headphones or ear buds)
• Dual-shielding, polished metal connectors and a corrosion-resistant gold-plated 3.5mm connector for pure, clear audio and minimal signal loss
• Beveled step-down design ensures a secure, fully plugged-in connection; PVC exterior offers added strength and flexibility; backed by an Amazon Basics 1-year limited warranty

User questions & answers

Question:	with this give sound from my Sony audio out to my sterio reciever so i can hear through mt surround sound speakers
Answer:	Yes you should be able too. I have an old song stereo receiver and I can plug that in and have surround sound, but you would have to have it as a multichannel. Since it’s just a single headphone jack
Question:	My tv has l&r rca and i want it to connect to my speaker with 3.5mm jack.. will it work
Answer:	just as long as your speakers are powered or you might have to use a amp,, normally outputs from sources like tv will not have the power to run speakers,,,standard outputs from rca or a headphone jack will need to connect to a reciever or amp and you would connect your speakers to the amp/reciever,,ie AVR etc etc, self powered speakers will be fine for a direct connection but in general a receiver will offer better options and more devices can be added .
Question:	What is the distance to the split point
Answer:	I think it is 3-4" which is plenty for any traditional R/L connections. Could go fairly wide if you were plugging into some vintage equipment. Good luck.
Question:	Is this a stereo cable
Answer:	If it works properly. Mine became a mono cable in just over 8 months.

Product features

Connect Devices

The adapter cable easily connects smartphones, tablets, MP3 players, and other devices to a speaker, stereo receiver, or other RCA-enabled device.

3.5mm Compatible

The male RCA connectors fit devices with left/right audio input, while the 3.5mm Male connector works with devices equipped with a 3.5mm aux jack.

Gold-Plated Connector

The cable features a corrosion-resistant gold-plated 3.5mm connector, high-quality polished metal connectors, and a flexible PVC protective jacket.

User-Friendly Design

The cable connectors provides a beveled step-down design that creates a fully plugged-in, secure connection, even for smartphones or other devices.