6 best monoprice audios

Product description

Connect your smartphone, mp3 player, laptop, or other audio source device to speakers, headphones, mixers, or other devices using the Onyx Series Auxiliary 3.5mm TRS Audio Cable. Unlike many 3.5mm cables, the connector heads are very thin, allowing you to plug into a smartphone with the case installed. Bend tested over 5,000 times for proven long-term durability, it features aluminum connectors for an extra measure of durability. All Monoprice cables come with a Lifetime Warranty.

• Slim Design: Our beveled step-down design creates a secure connection, while the connector heads are thin enough to plug into a smartphone with a protective case installed.
• Durable: We bend tested this cable over 5,000 times with no damage to the cable or change in performance. The premium aluminum connectors provide an extra measure of durability.
• Gold Plated: Gold plated plugs ensure smooth, corrosion-free connections every time.
• Stereo Audio: TRS (tip-ring-sleeve) plugs provide three conductors for the ground/return and for transmitting left and right channel audio data.
• All Monoprice cables come with a Lifetime Warranty.

User questions & answers

Question:	Will this transmit voice also
Answer:	Pressing the button on the front for a couple of seconds turns off the amp and a quick press will turn it on. When plugging the power into the unit, it will automatically turn on.

Product features

Monoprice Auxiliary 3.5mm TRS Audio Cable

Connect your smartphone, mp3 player, laptop, or other audio source device to speakers, headphones, mixers, or other devices using the Onyx Series Auxiliary 3.5mm TRS Audio Cable. The connector heads are very thin, allowing you to plug into a smartphone with the case installed. Bend over 5,000 times for proven long-term durability, it features aluminum connectors for an extra measure of durability.

Slim Design

Our beveled stepdown design creates a secure connection, while the connector heads are thin enough to plug into a smartphone with a protective case installed.

Durable

We bend this cable over 5,000 times with no damage to the cable or change in performance. The premium aluminum connectors provide an extra measure of durability.

Gold Plated

Gold plated plugs ensure smooth, corrosion-free connections every time.

Product description

The 3. 5mm (1/8") stereo TRS connector is more commonly known as the Headphone Jack on portable mp3 players and mobile phones. This cable features a male 3. 5mm stereo (TRS) plug on one end and a female stereo (TRS) jack on the other end each with molded connector housings and strain relief boots. The cable is ideal for extending the reach of a fixed length 3. 5mm stereo cable such as the cable on a pair of earphones

• The 3. 5mm (1/8") stereo TRS connector is more commonly known as the Headphone Jack on portable mp3 players and mobile phones
• This cable features a male 3. 5mm stereo (TRS) plug on one end and a female stereo (TRS) jack on the other end each with molded connector housings and strain relief boots
• The cable is ideal for extending the reach of a fixed length 3. 5mm stereo cable such as the cable on a pair of earphones
• Connector type: Hdmi Cable

User questions & answers

Question:	Can anyone who've had this for a while comment if it still works? No sound issues? Thanks
Answer:	The sets cannot be customized. The sets are premade and stored in Amazon warehouses for fast shipping but the chips are also available in boxes of 50 chips per color.

Product description

Simplify the task of running distributed audio for restaurants, hotels, or anywhere large areas need background music and/or paging address systems. Connect hundreds of speakers covering acres of area without the need for large equipment racks.

• XLR & 1/4" mic inputs, RCA stereo line inputs, RCA stereo line out
• Emergency trigger all off except for Mic 1 + Mic ducking (auto attenuation of line ins when mic is in use)
• 70/100V allows numerous speakers to be connected without complicated impedance calculations
• Plug and play configuration

User questions & answers

Question:	Are there priority inputs? IE: Will a microphone input over-ride music from another connected input source
Answer:	Your right a sizing chart is missing. I was already familiar with the Warner brand so I knew which size I needed. Seems to match in size the pack underwear like Hanes/fruit of the loom that I have bought in the past. For example that brand I am a 7 which I know to be a large which is what I bought for this brand as well and seems to fit well
Question:	Any issues connecting a PC to this amp
Answer:	The largest diameter circle is about 7.5in in it's natural state and stretches to about 10-10.5in.
Question:	What is emc for microphone priority? i have an existing unit i am replacing and i don't know what an emc connection is. can you help
Answer:	They are microwave and dishwasher safe. But can’t be used in the oven.
Question:	do i need a receiver with this amplifier to listen to the radio
Answer:	They do fit rectangular lids but not as easily as round ones

Product features

Commercial Audio 120W 5ch 100/70V Mixer Amp with Microphone Priority (NO LOGO)

A constant voltage speaker system differs from a traditional 8-ohm speaker system in that it uses a step-up transformer at the audio source to raise the voltage and lower the current on the transmission line. At the speaker end, a step-down transformer converts the signal back to a normal speaker level voltage. This reduces power loss during transmission, which allows for the use of longer speaker wire runs using smaller gauge wire.

Product description

Add 300 watts of clean and stable power to your studio rack using this 300-Watt Studio Audio Amplifier from Monoprice! This rack-mountable switching Class D amplifier packs 300 watts of power into a compact form factor, which takes up only 1U of rack space. It can be used as a stereo amplifier or can be bridged for mono mode. In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load. When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load. Additionally, it is stable when using reactive or mismatched loads, so for example, you can connect a 2-ohm speaker to one channel and an 8-ohm speaker to the other without any problems. It features an extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0. 05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection. It also features power on/off muting function to prevent popping in the speakers when power is turned on or off. There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage. Features: • Class D amplifier• High current switching power for high power output, low noise, and low distortion• Extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0. 05% THD+N• Balanced 1/4" TRS and XLR inputs• Unbalanced 1/4" TS and NL4 speaker twist speaker outputs• Built-in optional limiter helps prevent clipping• Short circuit, open circuit, thermal, ultrasonic, and RF protection• Stable with reactive and mismatched loads• Power on/off muting function• Separate gain controls for each channel• Signal and clipping LEDs for each channel• Power and protection LEDs• Bridgeable for high-power mono operation• 1U height• Includes rack mount ears

• In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8ohm load.
• When driving a 2ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load.
• It features an extremely flat 20Hz - 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection.
• It also features power on/off muting function to prevent popping in the speakers when power is turned on or off.
• There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.

User questions & answers

Question:	Can this work for my 300 watts rms / 400 watts program / 600 watts peak. passive pro dj subwoofer
Answer:	Yes, but you have to be careful at what Impedence (Ohm) load the speakers are going to be driven. With this amp to get a max of 500w RMS bridged with a 4 ohm load. With an 8ohm load. Which afe typically mostly used in homes because the require less amplifier power to drive the speaker. This amp puts out 360w RMS with the 8 ohm load. Again this is bridged and having output to one sub. This is a stereo amp that can bridged to increase power through one channel. Hope this helps
Question:	I am thinking i can use this to power my surround back speakers from my optona tx rz 920 any thoughts? wanna get
Answer:	I am using this amp to power my rear surround speakers with my Marantz SR7010 used in a 9.1.2 configuration. I run Front Wide speakers in this setup. I like the amp just fine. I modified mine by adding a second cooling fan as one of the reviews on the Monoprice site suggested. I ended up using all the parts that the reviewer did including the T.B.815 fans. The only thing I did differently was that I fabricated a second fan mounting bracket that bolts into the pre-drilled mounting holes on the other side of the amp instead of zip ties used in Monoprice review. This amp was obviously designed with 2 fans in mind. The reason that I made this modification is that I considered the stock fan, although not real loud, to be a little too loud for home theater use. You will have to make that decision for yourself. The amp runs very cool, although I believe it also would have with the stock (Higher Speed) fan, just a bit louder. Make sure that you find and read that Monoprice review. I'm not at all sorry that I bought this amp. I knew, from reading reviews, that it was very possible that I MIGHT consider the fan too loud. It really isn't that loud Hope this helps; Jack
Question:	Does this amp have an intertnal fan? and if so, how loud is the fan
Answer:	Yes. Some have said in their reviews that it is a bit noisy, but I haven’t found it distracting or bothersome. The amp performs well.
Question:	how do you connect the speaker cables
Answer:	You can use 1/4in class 2 or speakon connections

Product description

This blackbird; 4K hdmi® audio extractor extracts the audio signals from HDMI video streams. It supports analog stereo audio, as well as high-definition multichannel audio streams over the S/PD if digital optical Audio output. It supports video resolutions up to 4K@60Hz 4: 4: 4, 10-bit high dynamic range (HDR) pass-through, and audio sampling rates up to 192Khz. It is fully compliant with the HDMI 2.0B and HDCP 2.2 standards and provides up to 18Gbps video bandwidth. Features: extracts audio from an hdmi® video signal supports stereo analog and multichannel digital optical S/PD if audio supports video resolutions up to 4K@60Hz 4: 4: 4 Supports 10-bits high dynamic range (HDR) pass-through supports CEC bypass supports Audio sampling rates up to 192Khz provides up to 18Gbps video bandwidth support files: user' S manual (Jul 18, 2017) blackbird™ is a trademark of Monoprice Inc. Hdmi®, the HDMI logo, and high-definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Blu-ray disc™ and blu-ray™ are trademarks of the Blu-ray disc Association. &Nbsp;

• Extend HDMI signal at 4k@30hz up to 50m, or 164ft and 1080p up to 60m or 196ft
• Hdcp 2.2
• Poc, power both transciever and receiver from a single side
• 10.2Gbps video bandwidth
• 3 year warranty

User questions & answers

Question:	Will it pass through 1440p @ 120hz/144hz
Answer:	I would say that this is a good replacement speaker for any audio need....I have punished mine and they are still going strong.
Question:	I lost the analog 2ch audio from TV. Will this fix my problem
Answer:	Surprisingly, yes! I have two 410 cabs (one Eden and one loaded with Pyle PPA10s) and the Eden can’t keep up with the clarity of deep bass (low B on my 5 string) nor the articulation of playing up the neck. When the Edens crap-out, I’ll replace them with the Pyles.
Question:	Does this device support tv hdmi arc
Answer:	These are 8ohm speakers. Very strong work-horses in my 410 bass cab.
Question:	Does the pass through hdmi still contain original audio
Answer:	It sounded great in my jeep. If your looking for a decent bass boost and nothing too hard then this will work for you.

Product features

Monoprice Blackbird 4K HDMI Audio Extractor, 18Gbps, HDCP 2.2

This Blackbird 4K HDMI Audio Extractor extracts the audio signals from HDMI video streams. It supports analog stereo audio, as well as high-definition multichannel audio streams over the S/PDIF digital optical audio output. It supports video resolutions up to 4K@60Hz YCbCr 4:4:4, 10-bit High Dynamic Range (HDR) pass-through, and audio sampling rates up to 192kHz. It is fully compliant with the HDMI 2.0b and HDCP 2.2 standards and provides up to 18Gbps video bandwidth.

• Extracts audio from an HDMI video signal
• Supports stereo analog and multichannel digital optical S/PDIF audio
• Supports video resolutions up to 4K@60Hz YCbCr 4:4:4

Product description

Despite the introduction of more advanced audio and video signal cables such as HDMI and TOSLINK most Audio and a large number of video connections still use the common RCA connector. This is a premium two-channel audio cable Made of RG-59 75 Ohm coaxial cable. The cable uses a 22AWG conductor and is shielded to prevent EMI or RFI interference from entering your audio system. The connectors are gold plated for smooth connections and to prevent corrosion. Each connector head features embedded Color-coded rubber rings to ensure a firm grip when installing or removing the cable. Hdmi the HDMI logo and high-definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Despite the introduction of more advanced audio and video signal cables such as HDMI and Toslink
• This is a premium two-channel audio cable made of RG-59 75 ohm coaxial cable
• The cable uses a 22AWG conductor and is shielded to prevent EMI or RFI interference from entering your audio system

User questions & answers

Question:	Is this cable rated for in wall installation
Answer:	Unfortunately the 50 pack cannot be broken into 2 different denominations.
Question:	Are these balanced or unbalanced connectors
Answer:	It's made for 39mm-40mm chips (maybe 41-42mm chips may fit), but probably not 45mm.
Question:	Can the wires be pulled apart and completely separated if needed
Answer:	Sorry, we ship from Hawaii and shipping is not cheap. Even with that said, we are lower priced (price of item + s/h charge) than most sellers that offer free shipping since they add the shipping charge to the cost of the item!
Question:	Why are patch cables made of such thin wire? 22AWG is really meagre
Answer:	Yes, Trays can all be removed so plaques should fit (not sure how well) without trays in place.