7 best cable distribution amplifiers

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

• Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
• MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
• All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
• 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
• Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question:	May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer:	I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question:	If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer:	this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question:	Can this be mounted outdoors
Answer:	If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question:	Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer:	No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

Product description

Splitting the signal to more than one TV? The output distribution amplifier will help overcome signal loss. The CDA8 boosts signal to be split to 8 TV's or digital converter box.

• connect one tv antenna to 8 rooms while boosting signal in each location for reliable reception
• weatherproof indoor / outdoor housing (power inserter for indoor use only)
• 4.5db amplification per port
• includes distribution amplifier, power inserter, 3ft coaxial cable, and instructions
• 90 day warranty on parts
• Included components: Output Tv/catv Distribution Amplifier (8 Way)
• Connector type: F-Connectors

User questions & answers

Question:	I have an amplified antenna will this further amplify the signal? I'm 80 miles from the source
Answer:	it locks into the hole for the Nintendo DS. I am not sure about the XL, but assume they are the same size in terms of stylus used, so would say yes. We bought the 10 pack as my son tends to lose them so these work great. It hasn't fallen out of the holder once.
Question:	I would like to mount this in the wall with panel over it. Any ideas on how to do this and be in code
Answer:	Hello, this product is only suitable for New 2DS XL.
Question:	What is the "power in/rf out" output used for? It indicates it has 15vdc on it, so I'm wondering if that is harmful to a tv
Answer:	Sorry, this is only for Nintendo 2DS, but we have another set which can be used for DS Lite.
Question:	If I have a pre-amp antenna will this be an overkill
Answer:	I don’t think so but I don’t honestly know we used it for a drawing pad
Question:	What is the length of this charger? is it an authentic nintendo dsi product
Answer:	It does not specify that it will work with the New 2DS XL, but it does work for the Old and New 3DS XL and the Old 2DS. This package of styluses may have been manufactured before the New 2DS XL came out, so some of the styluses may fit it and just not be labeled on the package. Hope this helps.
Question:	will this fit the New Nintendo 3ds XL us version
Answer:	I don’t no the measurements but there the same as the Nintendo ones and fit perfectly. And they are only plastic
Question:	Is the game case and manuals inside included with the game purchase
Answer:	No, they're soft tipped made for pressure sensitive touch screens.
Question:	Does this version include the animated cut scenes by Akira Toriyama that were added in the PS1 re-release of the game
Answer:	works for ds but not fit in the slot
Question:	Is this game backwards compatible with the 3DS
Answer:	Being that I bought them for the ds I really wouldn’t recommend using it on the switch. They sell Switch specific stylus
Question:	Is this game the definitive edition? if not which one is the best ps1, snes or nds
Answer:	Not sure. My little girl used it for her old DS screen and it worked fine on that.

Product features

Antennas Direct ClearStream Juice Preamplifier System

Adding an preamplifier at the TV antenna increases available signal strength. For city, suburban, and rural locations, the Juice Preamplifier System overcomes weak signals and rejects interference from cellular and wireless data services. Use with a 100 ft. or more of coaxial cable from the antenna to the TV and the use of a splitter.

Antennas Direct PA18 Preamplifier Kit

The PA18 Preamaplifer is designed for rural TV antenna installations to provide consistent signal performance for reliable picture quality and reception. Use for weak signals, a 100 ft. or more of coaxial cable from the antenna to the TV, and the use of a splitter.

Antennas Direct 4-Output Distribution Amplifier

Connect one TV antenna to 4 TVs while boosting signal in each location for clear, consistent picture quality and reception.

Antennas Direct 8-Output Distribution Amplifier

Connect one TV antenna to 8 TVs while boosting signal in each location for clear, consistent picture quality and reception.

Product description

Introducing the Digital Signal Amplifier by THE CIMPLE CO.

This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.



Added Bonus:

Comes with an RG6 coax cable to help get you started right away.

For Best Results:

Place the distribution amplifier in a central location. Arrange this device so that it is the first on the coax cable coming from the antenna/preamplifier.

THE CIMPLE CO

All of our high quality products are brought to you by our Family owned and operated company.

We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.

Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

• Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
• Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
• Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
• Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
• Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty

User questions & answers

Question:	Waterproof for outdoor use
Answer:	It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet
Question:	what is the adjustable range
Answer:	does not include numbers just bigger or smaller range
Question:	Does the output go to the tv
Answer:	Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms.
Question:	I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set
Answer:	We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV.

Product description

4 Port RCA Audio Video Duplicator Splitter for TV Cable Box DVD

Display the same audio and video on 4 screen



If often you have been had trouble in outputting audio and video to multiple TV (for example receiving a much weaker signals), this powered RCA port splitter is a life saver for you!



Multiple Monitors Setup in Mutil-Room

You can use this active composite video distribution amplifier to display the same content from 1 AV source (such as DVD, XBOX, PS3) on 4 TVs or projectors in multiple room at the same time, without worrying about not having enough RCA ports on your TV.



Get the Original Signals Back to Your Life

The composite video booster boosts your A/V signal that will eliminate the poor picture and buzz sound caused by using cheap RCA Y splitter cable, and provide you clean output signals like the original signals.



1 input 4 output compact size box is ideal for applications such as public video broadcasting, home theater system, DVR recording, multimedia display, and video conferencing, etc.



Note: You can use it for both audio and video, audio only, or video only splitting.



Specific

Input Interface: 1 Chanel 3RCA Jack (yellow, white, red) Female

Output Interface: 4 Chanel 3RCA Jack (yellow, white, red) Female



1. Video

Input level Resistance: VS 0.8-1.0Vp-p / 75Ω

Output level Resistance: VS 0.8-1.0Vp-p / 75Ω

Bandwidth: 50Hz-5.5MHz



2. Audio

Input level Resistance: 2V (RMS) / 47 KΩ

Output level Resistance: 2V (RMS) /1KΩ

Audio Frequency: 10Hz-20KHz, 0db

AC power adapter: DC 9V (Input: 100V - 240V ~ 50/60Hz 0.3A Max; Output: 9V 500mA)



What is included:

1 x 4 Way RCA AV Splitter (1 in 4 out)

1 x Power Adapter

• 4 way RCA composite video splitter (1 in 4 out) splits one audio video analog signal into multi TV monitors /speakers for multiple viewing monitors or dubbing projects
• 3RCA (phono connector) distributor is built with amplifier that enables you to get sharp, clear visual image and reliable audio even in long distance connection
• Durable metal case housing with anti-skid feet ensures rapid heat dissipation for protection and a longer use life
• Active A/V signal booster duplicator box is small enough to be fitted behind a monitor, in the back of a rack; with DC 9V power adapter, No extra software needed
• LED indicator and color coded RCA jacks make AV devices connection easy (yellow plug for video, white/ red port for L/R audio)

User questions & answers

Question:	Cab babana plugs be used in this? If not what can be used as an interface between this device and speakers banana plug
Answer:	the interface between this device and speakers is an amplifier or receiver. All this does is duplicate one source and lets you send it to multiple amps.
Question:	Can you plug an aux in one r and have it play out
Answer:	Sorry that there is no aux jack for this RCA splitter box.
Question:	Could I connect 1 Turntable that will feed 2 outs : 1 to each of two Amps
Answer:	Yes, with this 1x4 RCA A/V splitter box（1 input 4 outputs）you can feed to multiple AV devices up to 4.
Question:	Can I use only audio 2 rca plugs instead of 3 rca? I have only 2 rca plug in speakers
Answer:	Yes, you can plug 2 rca plugs into this 1X4 RCA port Splitter to obtain audio.

Product description

The Channel Master Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 offers four amplified output ports allowing connectivity for up to four televisions without losing signal strength. Channel Master distribution amplifiers will work with all TV antenna installations. In addition, these HDTV signal amplifiers can be used with analog and digital RF distribution applications such as Cable TV where high performance and reliability are required.

The Ultra Mini 4 distribution amplifier is ideal for TV antenna installations with up to four televisions. Regular splitters will cause significant loss of signal strength which equates to poor picture quality, pixelation and channel dropouts. These amplifiers allow users to split and run their TV signal to multiple televisions in the home without risking a drop in signal strength.

The Ultra Mini HDTV Signal Amplifiers include a heavy-duty powder coated housing and weather-sealed ports allowing for indoor or outdoor installation in virtually any climate.

• Four Amplified Output Ports (8 dB)
• Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)
• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
• Miniature Size for Space-Saving Installations
• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

User questions & answers

Question:	Can this be used with an antenna preamp
Answer:	Yes, I have a preamp running in front of this device. Doing great. If you're asking if it can be used as an antenna preamp then no.
Question:	i have a horse trailer with a roof mounted digtal antenna. will this increase my reception power
Answer:	I'm guessing the other 2 respondents might be correct, but the only reason I bought this unit was to amplify the signal I get through Time Warner cable system. This unit is supposed to amplify a signal 15%. What I don't know is if it would amplify a signal through a roof mounted digital antenna. I only paid $15 for mine and it might be worth the gamble.
Question:	Can this item be used near the TV or does it have to go in the attic next to the antenna
Answer:	For the best performance it is better to locate the amplifier close to the antenna, not the TV. This maximizes the signal-to-noise ratio, which provides the best reception. In some cases it can be very inconvenient or impractical to place the amplifier close to the antenna, in which case you can try in a more convenient location. Maybe your results will be acceptable. But if performance is only so-so, you may want to make the effort to get the amplifier closer to the antenna. Other considerations: 1. If you get an amplifier don't be fooled into thinking that more "more dB gain is better". It's not necessarily. Very high gain amplifiers can be more prone to saturation and intermodulation, which can make your TV reception worse. 8-15dB gain probably should do the trick unless you've got other problems, such as... 2. a bad TV receiver; 3. a bad or inappropriate antenna. If you're using an old antenna that wasn't designed for digital TV, it may be better to replace the antenna than to add an amplifier to an old antenna that is digital TV compatible; 4. antenna coax cable that is too long or poor quality. Don't use crummy antenna cable. Don't use pitiful RG58. RG59 at least, with quad shield. If you're a real stud, you might consider RG6. And use good connectors. This may mean buying a good quality connector crimper, not some sorry piece of junk.
Question:	Can the dB gain ever be too much for a TV
Answer:	dB is a ratio, and without a reference, doesn't have a value. Signals from an antenna are almost always in the micro-volts. The 4 output amplifier has a gain of 8dB, which is about 2.5, so the likelihood of overloading the TV's input is low, and if you have enough signal to do that, you wouldn't need an amplifier.

Product features

4-Port HDTV Signal Amplifier

Channel Master has been at the forefront of over-the-air broadcast entertainment products and solutions, providing the highest quality and value to consumers since 1949. Headquartered in Chandler, Arizona (Phoenix), Channel Master offers a complete portfolio of over-the-air TV antennas, OTA DVR's, TV antenna mounting equipment, amplifiers, cables, connectors and more.

Ultra Mini 4

The Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 has four output ports and can be used in HDTV, CATV, off-air, analog and digital RF distribution applications where high performance and reliability are required.

What's Included

• Ultra Mini 4-Port TV Signal Amplifier

• Power Adapter

• 6ft RG6 Coaxial Cable

• User Guide

Features

• Four Amplified Output Ports (8dB)

• Works with all TV Antenna & CATV Installations

• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels

• Miniature Size for Space-Saving Installations

• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

• ✔ ALL-IN PACKAGE – Includes 1 Transmitter and 4 Receivers. Extend and distribute 1 HDMI source to 4 HDMI displays over CAT5e/6/7 simultaneously. **NOTE: If you live in an area with thunderstorms, plug this product's power adapter into a surge protecter power strip to protect your device from voltage spikes.
• ✔ HDMI LOSSLESS/UNCOMPRESSED TRANSMISSION – It extends HDMI audio/video signals to synchronous output video display(s) is as fluent as direct connection; Supports 480i/480p/720p/1080i/1080p at 60Hz video resolutions and surround sound up to 7.1-channel or stereo digital audio; Compatible with HDCP compliant devices & content
• ✔ VIDEO TRANSMISSION – Up to 40m (130ft) at 1080p@60Hz with CAT5e/6/7. Good quality CATx cables are essential in delivering quality content. We recommend using high performance pure COPPER gofanco CAT6 cables to ensure reliable performance: Search CAT6UTP-100(B07PB3R8BK)/CAT6UTP-150(B07P6TDMLH) on Amazon.
• ✔ IR REMOTE CONTROL – Allows source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a CAT5e/6/7 cable for your convenience. !!!NOTE!!! this kit will NOT through a router/switch based TCP/IP network
• ✔ EASY INSTALLATION – No driver required; Surface mountable metal housing allows easy placement; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. We love our products and hope you will too. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, visit our gofanco website or click on our name in the buy box and select "Ask a Question".

User questions & answers

Question:	does it work with 220v electricity
Answer:	If you mean the mirror and where they attach to the MH as 21 ". They should.
Question:	I ran the receiver hdmi out to the transmitter. the receiver tv has video but no audio. it it supposed to have both
Answer:	Yes- it is made for gold balls, the mess will stop a lacrosse ball.
Question:	Not seeing hdcp type question in the list....has anyone had any issues with cable boxes as sources? only need 1 cable source for all tvs
Answer:	Yes, that is how we have it set up. I think you can set it up 10 feet wide and 30 feet tall if needed.
Question:	The specs say this gives you 40 meters of signal. Is that per output (x4) or a total for the full unit
Answer:	Side Barriers are not available through Amazon. They are sold as a pair and include sandbags. Sincerely, Paul C. (The Net Return, LLC.)

Product features

4-port HDMI Extender Splitter

• Extend and distribute 1 HDMI source to 4 HDMI displays over CAT6 simultaneously. *Good quality CAT cables are essential in delivering quality content
• We recommend using high performance pure COPPER gofanco CAT6 cables to ensure reliable performance: Search CAT6UTP-100(B07PB3R8BK)/CAT6UTP-150(B07P6TDMLH).
• Compatible with HDMI 1.3 and HDCP 1.4 standards.
• Up to 1080p @60Hz
• Digital Stereo 7.1-channel, PCM, Dolby DTS, and AC3 Audio Formats

EDID DIP Switch Management

Predefined DIP Switch settings allow for the correct display and audio formats to be transmitted across all 4 screens. The display's Extender Display Identification Data (EDID) is communicated to the source to obtain the most compatible signal, which in turn leaves you with the highest possible video and audio quality.

Compatible Devices

• HDMI source device, such as computer PCs, game consoles, Blu-ray players, and media players
• HDMI displays, monitors, and HDTVs
• 1080p ONLY

1x2 HDMI Extender Splitter

Search

• SKU = HDMIExtSplit
• ASIN = B071R65PDS

1x2 Prophecy HDMI Extender Splitter

Search

• SKU = HDExt2P-Pro
• ASIN = B076V4G638

1x8 HDMI Extender Splitter

Search

• SKU = HDMIExt8P
• ASIN = B07JNNJW1T

Product description

Designed for high end RCA audio distribution the Rolls DA134 is a four-channel distribution amplifier. RCA and 1/8" inputs that can be switched from mono or stereo. The DA134 will distribute a mono signal to eight outputs, or a stereo signal to four stereo outputs. The outputs are designed to drive line level signals. The DA134 is the perfect distribution amp anywhere high quality sound distribution is required.

• Rolls 4-Channel RCA Distribution Amplifier - PS27s Power Supply - Rolls 1 Year Parts and Labor Limited Warranty
• Expands the output of a stereo device to multiple outputs
• Can raise the output level to true line level for any output
• Stereo 4 channel distribution amplifier
• Front panel volume controls

User questions & answers

Question:	Does this unit handle phono and tape input
Answer:	Not completely, I had to fold over the part the covers the arm so about 1 inch on the top shows and about 1.5 inches of the arm is exposed on the bottom.
Question:	Can this unit be "daisy-chained" with a second Rolls Distribution amp to expand the number of outputs
Answer:	They do cover the arms on our Winnebago VistaLX.
Question:	what are the wattage or power
Answer:	Don't know the size of those mirrors but on my Miramar MH they are actually a bit to large. I believe they have the measurement of the covers at the site to order them.