13 best ge tv signal amplifiers

Product description

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.

A better signal means better TV with the GE-branded Indoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels. This low-noise amplifier boosts signal strength to compensate for cable loss and minimizes reception dropouts to strengthen the signal of available channels that your antenna is already receiving. The number of channels and the reception quality will vary based on distance from broadcast towers, antenna position and obstacles, including hills, buildings and trees.

Compatible with all brands, the amplifier easily connects to the coax cable from your antenna and then attaches directly to your TV—twist-on connectors mean no tools are required for installation. This amplifier is perfect for any indoor passive antenna and is powered using the included AC power adapter. Seeing is believing with the GE-branded Indoor Antenna Amplifier.

• SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
• LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.
• EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.
• IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	how long is the power cord
Answer:	Hello Ermac, thank you for your question. Yes, as long as your Smart Roku TV has a coax port. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Has anyone tried using this to improve picture from an old game console (like an Atari2600 or Intellivision) that uses coax
Answer:	Hi Charles, thank you for your question. The GE UltraPro Traditional Indoor Antenna is rated to work within 30 miles of the broadcast source. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday through Friday at 1-800-654-8483. Thank you
Question:	How much does the amplifier boost the signal
Answer:	This antenna was created to work in a sitting position. However, most other antennas are made to stand up straight. We have not tested the reception from the suggested position. It could work fine but we cannot guarantee that.
Question:	most questions are about the antenna but, how well does the booster work - how many miles does it give, is it better than standard antenna boosters
Answer:	Hello Thomas H. , thank you for your question. The coax is cable is 4ft long.

Product features

GE TV Antenna Amplifier

Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

1. Connect TV Antenna to the Amplifier

2. Connect Amplifier to TV and AC Power Adapter

3. Perform a New Channel Scan

Add to Your Setup

Complete your overall entertainment setup with the indoor amplifier

• Antenna Amplifier
• TV Antenna (GE #43452 - sold separately)
• Universal Remote (GE 46195 - sold separately)
• Coaxial Cable (GE #33532 - sold separately)

Product description

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.

A better signal means better TV with the GE-branded Outdoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels that your antenna is already receiving. Low-noise amplification improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience.

Mounting hardware and step-by-step instructions are provided for simple installation for use with one TV or multiple TVs throughout your home. The durable, weather-resistant design allows you to place this amplifier with your antenna in the best location to minimize signal dropouts caused by interference from building materials and walls. The amplifier features input and output coax connections making it compatible with a wide range of antenna brands and models. Seeing is believing with the GE-branded Indoor Antenna Amplifier.

• SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your outdoor non-amplified, passive TV antenna. Amplifiers will clear up any low-strength, fuzzy, or pixelated channels – in some cases, the number of channels you receive may change depending on your distance from the local broadcast towers.
• WEATHER RESISTANT DESIGN – Durable build is intended for outdoor installation and placement in the best location to minimize interference from building materials and walls. This amplifier can be mast-mounted, wall-mounted, or used indoors.
• EASY TO INSTALL – Includes power inserter, power supply, zip ties , rubber boot , and clear and simple-to-read user manual and installation instructions.
• IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	How is the signal quality during bad weather including snow
Answer:	While snow does not have an effect, sometimes, but not often, atmospheric conditions make static when the FM station 65 miles away is in stereo. Switching off the stereo kills the static.
Question:	What are the dimensions of this item
Answer:	Dimensions 20" L x 9.2" W x 3.6" H
Question:	Will the antenna amplifier work on my non GE outdoor antenna? Can the antenna amplifier be indoors in a basement where the splitter is
Answer:	Hi RanJay, thank you for your question. Our amplifier is compatible to work with multiple antenna brands with RG6 F-Type coax cable. Yes, the antenna can be mounted both indoor and outdoor. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Does this antenna pick up vhf stations? this is important to me as most antennas today do only a weak job of it
Answer:	NO! It is excellent for UHF, but forget about VHF. I have a signal meter which shows 0 for signal strength for a VHF High band channel. The broadcast tower is the same distance away as other towers broadcasting UHF that is showing on my meter from 98 to 100! If you need VHF, forget this one. You should also check the changes to be made in your area, which could result in more VHF broadcasts in the near future.

Product features

GE TV Antenna Amplifier

Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

1. Connect TV Antenna to the Amplifier

2. Connect Amplifier to Power Inserter and AC Power Adapter

3. Perform a New Channel Scan

Add to Your Setup

Complete your overall entertainment setup with the indoor amplifier

• Antenna Amplifier
• TV Antenna (GE #29884 - sold separately)
• Coax Splitter (GE 33527 - sold separately)
• Coaxial Cable (GE #33532 - sold separately)

Product description

Watch TV like never before with the GE Ultra Edge Indoor Black TV Antenna. Not only will you save money by eliminating pricey cable and satellite services with this indoor antenna, but you will also receive plenty of free local channels at no additional cost. It’s slim and sleek, modern appearance will coordinate effortlessly into your home theater setup. The GE Ultra Edge Indoor Black TV Antenna is the perfect way to maximize your HD viewing experience without an additional monthly cost.

• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows in Full HD on channels such as ABC, NBC, CBS, PBS, Fox and much more with access to all the current events, sitcoms, kids, and sports programs without the monthly bill
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – Our indoor TV antenna has superior reception for both VHF and UHF signals, receiving uncompressed 1080p signal and the Pure Amp Technology increases signal strength while reducing dropouts
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach up to 50 miles from the broadcast signal and placed almost anywhere in your home. As new channels are made available, rescan your TV to allow the antenna to pull in the updated frequencies.
• MULTIPLE DISPLAY OPTIONS – The black or white reversible sides provide options to display to match any home decor and you have the choice to lay the antenna flat or mount it on the wall

User questions & answers

Question:	Do I need a separate coax cable? the one in the image looks like its 4 inches long. how could this even reach the table that the tv is on
Answer:	Yes, it's for one TV only. The coaxial cable screws into to the back of the TV. This was a great investment since there are many broadcast/network stations close to where I live. Great reception. This is an alternative to cable. I am able to pick up CBS, NBC, FOX, ABC, and several other local and foreign channels/stations.

Product features

GE Ultra Edge Amplified Indoor TV Antenna - Reversible Black or White Finish

• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows in Full HD on channels such as ABC, NBC, CBS, PBS, Fox and much more
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – Our indoor TV antenna has superior reception for both VHF and UHF signals, receiving uncompressed 1080p signal and the Pure Amp Technology increases signal strength while reducing dropouts
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach up to 50 miles from the broadcast signal and placed almost anywhere in your home.
• MULTIPLE DISPLAY OPTIONS – The black or white reversible sides provide options to display to match any home decor and you have the choice to lay the antenna flat or mount it on the wall

Pure Amp Technology

Filters noise and amplifies your signal for crystal clear reception

Enhanced HD

Receive outstanding picture quality in Full HD 1080p

Reversible

Reversible black or white appearance matches your home decor

All Brands

Works with all major brands of TVs

Product description

Watch TV like never before with the GE Pro bar Black indoor TV antenna Not only will you save money by eliminating pricey cable and satellite services with this indoor antenna but you will also receive plenty of free local channels at no additional cost Its slim design fits most HDTVs while its sleek modern appearance will coordinate effortlessly into your home theater setup The pure amp technology filters noise and amplifies signal for crystal clear Reception The integrated low-noise amplification improves Signal-to-Noise ratio while boosting signal level at the antenna With the ability to out within 50 miles of the broadcast signal The GE Pro bar Black indoor TV antenna is the perfect way to maximize your HD viewing experience without an additional monthly cost

• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows In Full HD on channels such as ABC NBC CBS PBS Fox and much more with access to all the current events sitcoms kids and sports programs without the monthly bill
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – our indoor TV antenna has superior reception for both VHF and UHF signals receiving uncompressed 1080p signal and the pure amp technology increases signal strength while reducing dropouts
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach up to 55 miles from the broadcast signal and be placed almost anywhere in your home As new channels are made available rescan your TV to allow the antenna to pull in the updated frequencies
• EXCEPTIONAL STYLE AND PERFORMANCE – The long sleek bar design replaces traditional dipoles and is engineered to enhance VHF signal reception for the highest number of over-the-air channels available in your area It seamlessly blends with any decor or home theater setup and can be mounted above your TV for maximum performance There’s no need for unsightly square or rabbit-ear antennas that take up space This slim bar antenna is the perfect complement to your entertainment system
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	Does it come with a mounting stand
Answer:	After installation, you must perform a channel scan using the instructions found in your TVs user manual. To ensure you receive the maximum number of channels available you will need to experiment re-positioning the antenna and performing another channel scan on your TV. Visit www.antennaweb.org to determine the available television staions and location of the broadcast towers in your area. If further assistance is needed, please contact our Technical Support Team by calling 1.800.654.8483 opt 1.
Question:	Is the coaxial cable permanently attached to the antenna or is it a separate cable that can be switched out for a better one
Answer:	To get digital channels (which are about all you can get nowadays), you will need a digital converter box with your old tv. You plug this into the digital converter box, and the converter box into your tv. If by some chance a station is broadcasting in analog near your house, you could get those stations in without a converter box. Currently, there are no analog stations where I live as it is costly for a station to broadcast both analog and digital.
Question:	Does this work the fire stick
Answer:	Hi Jason, thank you for your question. The antenna has a built-in amplifier. Plugging the AC adaptor powers the amplifier. you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Will i be able to get oxygen and investigation discovery channels
Answer:	Yes, you can use a 18ft coax cable. There is an amplifier that is built into the antenna to help push signal to the TV for this case.

Product features

GE HDTV Antenna - Amplified Bar

• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows In Full HD on channels such as ABC, NBC, CBS, PBS, Fox and much more
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – our indoor TV antenna has superior reception for both VHF and UHF signals, receiving uncompressed 1080p signal and the pure amp technology
• LONG RANGE ANTENNA – can reach up to 55 miles from the broadcast signal and be placed almost anywhere in your home.
• EXCEPTIONAL STYLE AND PERFORMANCE – The long, sleek bar design replaces traditional dipoles and is engineered to enhance VHF signal reception for the highest number of over-the-air channels available in your area. There’s no need for unsightly square or rabbit-ear antennas that take up space.
• FREE U.S.-BASED TECHNICAL SUPPORT

Long Range HD Antenna

• Reach up to 55 miles from the broadcast signal
• Receiving uncompressed Full 1080p signal
• 4K UltraHD Ready

Multiple Mounting Options

This antenna is the perfect complement to your entertainment system

• Place on a tabletop or entertainment center
• Mount to your wall

Slim Sound Bar Design

• Long sleek bar design replaces traditional dipoles
• Engineered to enhance VHF signal reception for the highest number of over-the-air channels available in your area
• No need for unsightly square or rabbit-ear antennas

Tips for Best Performance

1. Before you purchase: visit www.antennaweb.org to find the available channels in your area
2. Position the antenna in as high as possible for best reception
3. Perform a new channel scan after installing and anytime the direction or position of the antenna is changed

Product description

Splitting the signal to more than one TV? The 4-Output distribution amplifier will help overcome signal loss. The CDA4 boosts signal to be split to 4 TV's or a digital converter box.

• Connect one TV antenna to 4 rooms while boosting signal in each location for reliable reception
• Weatherproof indoor / outdoor housing (power supply component for indoor use only)
• 7.5dB amplification per port
• Includes distribution amplifier, power supply, 3ft coaxial cable for power supply, and instructions
• 90 day warranty on parts

User questions & answers

Question:	I have an amplified antenna will this further amplify the signal? I'm 80 miles from the source
Answer:	Yes, it has an American power supply cord.
Question:	I would like to mount this in the wall with panel over it. Any ideas on how to do this and be in code
Answer:	Hook up your TV to your karaoke using the RCA cable. This is color-coded so you just have to plug the yellow cord to the yellow port, red cord to the red port, and the white to its designated port as well. Just remember that you should be connecting it to the port with an “Out” label on your karaoke machine, and “In” label on your TV. Power on both units. From your TV, be sure to change the video source to AV1 or AV. Load up your karaoke CD. You should be able to see the lyrics playing on your TV screen. If nothing comes up on the screen, be sure to check the colors are plugged correctly and that it’s connected to “In” on the TV. Even if it’s already quite obvious, this is still a very common mistake that should not be overlooked. Method 2 This method is for those karaoke machines without an AV output. Like we have mentioned earlier, you will not be directly hooking up your karaoke system to your TV. Even if I have a karaoke machine which can connect to TV, I still end up using this method from time to time because it allows me to play almost any song on YouTube. Connect your device to your TV using screen mirroring, or chrome cast directly from the YouTube app to your smart TV. Be sure that your TV and your device are connected to the same wifi network. Play a sample song or video from YouTube on your device and verify that it’s showing up on your TV screen. Verify that the sound is going out on your TV as well. If you have it connected to your home theater, it should output the sound from there. Turn on your karaoke machine and test the mic. Adjust the volume, echo, etc. so that volume of your voice coming out from the built-in speaker is on the same level as that from your TV (or external speaker). Your karaoke machine acts as a PA speaker for your voice, with your song and lyrics playing on your TV. Wrapping It Up
Question:	What is the "power in/rf out" output used for? It indicates it has 15vdc on it, so I'm wondering if that is harmful to a tv
Answer:	1. press the"Mode" button to switch to Bluetooth mode(the screen shows "BLUE". 2. open your phone bluetooth, then you will find "RLONG" device and connect it, then play music.
Question:	If I have a pre-amp antenna will this be an overkill
Answer:	Si trae cable para conectar 110 volts

Product features

Antennas Direct ClearStream Juice Preamplifier System

Adding an preamplifier at the TV antenna increases available signal strength. For city, suburban, and rural locations, the Juice Preamplifier System overcomes weak signals and rejects interference from cellular and wireless data services. Use with a 100 ft. or more of coaxial cable from the antenna to the TV and the use of a splitter.

Antennas Direct PA18 Preamplifier Kit

The PA18 Preamaplifer is designed for rural TV antenna installations to provide consistent signal performance for reliable picture quality and reception. Use for weak signals, a 100 ft. or more of coaxial cable from the antenna to the TV, and the use of a splitter.

Antennas Direct 4-Output Distribution Amplifier

Connect one TV antenna to 4 TVs while boosting signal in each location for clear, consistent picture quality and reception.

Antennas Direct 8-Output Distribution Amplifier

Connect one TV antenna to 8 TVs while boosting signal in each location for clear, consistent picture quality and reception.

Product description

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

• The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier
• TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
• Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation
• Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.
• Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used

User questions & answers

Question:	Is there a powered splitter or something that would allow this product to work for placement in between the preamp and power inserter
Answer:	If you want to have a splitter between the preamp and the power inserted, you need to use a "power passing" splitter. I used this one from Amazon http://www.amazon.com/gp/product/B0018BN0UW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1. You may choose a different one depending on the number of connections you need at the splitter.
Question:	can this be used with Winegard FL6550A to strengthen the signal
Answer:	No. It has a built in preamp. I used this preamp with the FL6550A antenna and the channels I had dropped in half from 51 to 26. Actually makes the FL6550A antenna perform worse!
Question:	Can I use this to boost sig for 2 antennas: Clear Stream's DB4E UHF antenna PLUS C5 VHF antenna? Do I put the amp after the combiner
Answer:	I'll add my answer for future installers. I run two dual element antennas pointed in opposite directions and use TWO preamps -> then combine.If I were running two antennas for the purpose of band separation (UHF / VHF) - I might combine first then preamp. The BUMMER here - is that this is an EXCEPTIONAL unit with only 1db of noise. That means it outperforms other preamps that declare higher gains. This Wineguard amplifies the VHF and the UHF signals separately - which would make you ask - WHY ON GOD's GREEN EARTH would you NOT give us the ability to hook up separate UHF / VHF antenna feeds??There are preamps out there that do have separate inputs - RCA has a very popular unit around $20 but it won't perform as well as this overall. Id try FIRST - to combine at the mast- preamp and then distribute.If you don't like the results - you can ALWAYS add another preamp and change it to a preamp for each antenna then combine. What a shame though - since you would only be using half the capability of each preamp in the second scenario.
Question:	Will this booster improve (%) both signal strength & quality? Will it make the OTA CH's that are 100% (w/o amp) worse
Answer:	You have a given amount of tv signal present in the air, (assuming, your within range and elevation to capture a signal), also signals fluctuate according to temperature and moisture present in the atmosphere. So this is generally a constant changing thing that we have no control. Sometimes there are band openings that cause tv signals to behave in ways in both favorable and unfavorable depending on conditions that are present. Your digital TV tuner in your TV, in order to lock onto a signal, (that signal must be of high integrity and not out of phase). Generally the antennas of higher gain do better than cheap off the shelf small antennas (especially indoor/outdoor models). Also the inexpensive antenna systems that claim 150 or more mile range. All feedline has loss; some are better than others in this problem. The more loss in your TV feedline cable, will result in less tv signal reaching your TV tuner. RG-6 is a better grade than rg-59 resulting in better quantity of signal available to the tv tuner. Tv preamplifiers like this one, boost the signal level at the antenna location so as to compensate for the loss in your cable run to the tv tuner. Another issue is that you cannot amplify a signal without creating noise (distortion), in the signal. Some preamplifiers do their job by not creating so much noise in the signal. (The lower the noise, the better); regardless of gain figures although high gain does help. This unit is of good quality and has the added benefit of separate uhf/vhf antenna inputs for those who need to use single band tv antennas to achieve high results to specific applications. Your TV tuner can only lock onto a signal of high integrity. This unit is a good choice to help deliver that signal to the tuner, assuming everything else is in order. If multiple antennas are used for digital TV reception; they must be connected prior to being amplied, otherwise it will be out of phase and the tv can't lock onto signal like that. Hopefully, I have explained this so it's easier to understand. There is a science behind," how this works". Hope this advise has helped others. 73 and GOD bless K5EWM.

Product features

More Range, More Channels, Better TV Reception

Extend the range and signal quality of your non-amplified digital HDTV antenna with the LNA-200 Boost XT Outdoor Digital TV Antenna Amplifier. It features TwinAmp Technology, which separately amplifies VHF and UHF signals for maximum performance on any non-amplified outdoor antenna.

This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation — maintaining the purest signal path possible.

Watch More Free HDTV Content

Winegard antennas provide the maximum content available in your area with antennas capable of receiving both VHF and UHF signals from up to 65 miles away.

Add a Winegard Boost XT Amplifier featuring Clear Circuit and TwinAmp technology to give you the absolute best signal quality.

Cut-The-Cord And Save

Watch what you want without the big monthly bill. Cut-the-cord and watch the top-rated shows for free.

Pair With A Streaming Device

Pair your antenna with a streaming device such as a Roku, Fire TV, or Chromecast for maximum programming (sold separately).

Watch your local news, weather, and live sports on your antenna and enjoy other TV shows and movies with services like Netflix, Amazon, or Hulu for a fraction of the cost (subscription required).

Product description

The Channel Master Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 offers four amplified output ports allowing connectivity for up to four televisions without losing signal strength. Channel Master distribution amplifiers will work with all TV antenna installations. In addition, these HDTV signal amplifiers can be used with analog and digital RF distribution applications such as Cable TV where high performance and reliability are required.

The Ultra Mini 4 distribution amplifier is ideal for TV antenna installations with up to four televisions. Regular splitters will cause significant loss of signal strength which equates to poor picture quality, pixelation and channel dropouts. These amplifiers allow users to split and run their TV signal to multiple televisions in the home without risking a drop in signal strength.

The Ultra Mini HDTV Signal Amplifiers include a heavy-duty powder coated housing and weather-sealed ports allowing for indoor or outdoor installation in virtually any climate.

• Four Amplified Output Ports (8 dB)
• Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)
• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
• Miniature Size for Space-Saving Installations
• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

User questions & answers

Question:	Can this be used with an antenna preamp
Answer:	Yes, I have a preamp running in front of this device. Doing great. If you're asking if it can be used as an antenna preamp then no.
Question:	i have a horse trailer with a roof mounted digtal antenna. will this increase my reception power
Answer:	I'm guessing the other 2 respondents might be correct, but the only reason I bought this unit was to amplify the signal I get through Time Warner cable system. This unit is supposed to amplify a signal 15%. What I don't know is if it would amplify a signal through a roof mounted digital antenna. I only paid $15 for mine and it might be worth the gamble.
Question:	Can this item be used near the TV or does it have to go in the attic next to the antenna
Answer:	For the best performance it is better to locate the amplifier close to the antenna, not the TV. This maximizes the signal-to-noise ratio, which provides the best reception. In some cases it can be very inconvenient or impractical to place the amplifier close to the antenna, in which case you can try in a more convenient location. Maybe your results will be acceptable. But if performance is only so-so, you may want to make the effort to get the amplifier closer to the antenna. Other considerations: 1. If you get an amplifier don't be fooled into thinking that more "more dB gain is better". It's not necessarily. Very high gain amplifiers can be more prone to saturation and intermodulation, which can make your TV reception worse. 8-15dB gain probably should do the trick unless you've got other problems, such as... 2. a bad TV receiver; 3. a bad or inappropriate antenna. If you're using an old antenna that wasn't designed for digital TV, it may be better to replace the antenna than to add an amplifier to an old antenna that is digital TV compatible; 4. antenna coax cable that is too long or poor quality. Don't use crummy antenna cable. Don't use pitiful RG58. RG59 at least, with quad shield. If you're a real stud, you might consider RG6. And use good connectors. This may mean buying a good quality connector crimper, not some sorry piece of junk.
Question:	Can the dB gain ever be too much for a TV
Answer:	dB is a ratio, and without a reference, doesn't have a value. Signals from an antenna are almost always in the micro-volts. The 4 output amplifier has a gain of 8dB, which is about 2.5, so the likelihood of overloading the TV's input is low, and if you have enough signal to do that, you wouldn't need an amplifier.

Product features

4-Port HDTV Signal Amplifier

Channel Master has been at the forefront of over-the-air broadcast entertainment products and solutions, providing the highest quality and value to consumers since 1949. Headquartered in Chandler, Arizona (Phoenix), Channel Master offers a complete portfolio of over-the-air TV antennas, OTA DVR's, TV antenna mounting equipment, amplifiers, cables, connectors and more.

Ultra Mini 4

The Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 has four output ports and can be used in HDTV, CATV, off-air, analog and digital RF distribution applications where high performance and reliability are required.

What's Included

• Ultra Mini 4-Port TV Signal Amplifier

• Power Adapter

• 6ft RG6 Coaxial Cable

• User Guide

Features

• Four Amplified Output Ports (8dB)

• Works with all TV Antenna & CATV Installations

• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels

• Miniature Size for Space-Saving Installations

• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate

Product description

Winegard LNA-100 Boost Indoor Digital TV Antenna Amplifier The LNA-100 indoor amplifier increases range and delivers a crystal clear TV signal to HDTVs so viewers can get more broadcast TV channels in high definition than with an antenna alone. Using the latest advances in amplifier technology, Boost enhances any indoor non- amplified antenna, delivering more range and available channels. In The Box - LNA-100 Boost Indoor Digital TV Antenna Amplifier - USB Power Cable - 110V Adapter - Printed Documentation Size, Compatibility and Features - Dimensions: 8.5" x 0.8" x 1.5" - Boost any Non-Amplified TV Antenna - Minimize Pixelation and Dropouts - Receive More Channels - Gain (typical): 20 dB - Noise Figure (typical): 1dB - Power: +5V

From the Manufacturer

• HDTV Antenna Amplifier - The Winegard Boost TV signal booster enhances any indoor non- amplified antenna, delivering more range and available channels. Delivers a crystal clear signal, watch more channels than with an antenna alone.
• Amplified Clear Circuit Technology - Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation. The Boost preamplifier enhances any non-amplified antenna.
• In The Box - Includes Winegard Boost LNA-100 indoor digital TV antenna amplifier, energy saving USB power cable with LED power indicator, 110V adapter and printed documentation.Gain (typical): 20 dB,Power: +5V
• Winegard Boost Warranty and Support - The LNA-100 digital antenna booster comes with a 1 year parts and labor limited warranty and complimentary telephone and email support.
• Winegard TV Antenna Experts - Leading US designer and manufacturer of quality TV antenna and signal equipment since 1954. Designed and built in the U.S.A.

User questions & answers

Question:	i understand that i add this between the antenna cable and the tv. do i need to plug this into an outlet as well
Answer:	Yes... It is a powered amplifer. You can either plug it into a wall receptacle or a USB port. If your TV has a open USB port you can power it there.
Question:	Can two antennas be boosted to one TV using a splitter
Answer:	I did this with a Splitter and it improved the reception because each Antenna was pointed in a different direction helping me get additional channels to one TV.
Question:	I get great reception on my tv (full bars), but running it through my channel master dvr, i can't get signal on some. will this help
Answer:	It may if it the reason that you are not receiving the channel is that it needs a small amount of amplification. Look at the signal meter on the dvr. If it shows a small amount of signal then amplification may help to give enough signal strength for the dvr tuner to lock on the channel.
Question:	So i add between the antenna cable and the tv. do i need to plug this in to an outlet as well
Answer:	Yes, you connect it between the tv and the antenna. And plug it into a wall outlet or a USB connection, for power. it comes with another wire and plug not shown in this picture.

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+7dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included.
• 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)
• 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.

User questions & answers

Question:	If I have to run 15' of RG6 coax to the power port, will this affect the operation of this unit
Answer:	According to data I received on this amp it can be run out to a PA.
Question:	Can I split the signal coming out of one output
Answer:	You could play a bass through it but it was definitely designed for electric guitar. I believe orange makes bass amps.
Question:	Will this work, with a digital tv antenna
Answer:	No discreet remote available as far as I know. Your phone or tablet with the Spark app, however, works as a full function remote, controlling and overriding every knob on the amp. The app also gets you over 10,000 downloadable tones. Great amp for practice and small venues. Much more than I expected.
Question:	So the adapter plugs into a wall outlet and connects with a coaxial cable to the amplifier and the amplifier connects between an antenna and the TV
Answer:	Yep. It’s the same. I had to order this bc they wouldn’t ship to AK.

Product description

The Antronix MicroAmp provides subscriber premise amplification in a small convenient package. The one output micro-housing allows all ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.

Our patented CamPort® provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• Micro-Housing

Our micro-housing offers the convenience of a small package without sacrificing

performance.

• Port Configuration Ideal for NID Enclosures

The micro-housing allows all output ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.

• CamPort® Auto-Seizing F-port

Patented auto-seizing F-port features a “Cam Activated Mechanism” to provide full contact pressure (>2,000 grams) on the center conductor for maximum reliability.

• 3 dB Noise Figure

Provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.

• 6 kV Combination Wave Surge Protection

Unique surge protection on all ports without the use of arc gaps which may cause high impulse noise during discharge.

• 15 psi Sealed SCTE Compliant CamPort®

Sealed brass CamPort® prevents water migration.

 

• The micro-housing allows all output ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.
• Patented auto-seizing F-port features a “Cam Activated Mechanism” to provide full contact pressure (>2,000 grams) on the center conductor for maximum reliability.
• True 5-42 MHz return band and full 1 GHz downstream spectrum for more useable bandwidth.
• Unique surge protection on all ports without the use of arc gaps which may cause high impulse noise during discharge.
• Self-resetting circuit protection provides safe protection against short-circuits to minimize maintenance costs.

User questions & answers

Question:	Will it work at end of long cable run
Answer:	the firmware is upgradable, I am not certain if we have an upgrade out for that model yet (it is very new) but you can use windows and mac to update.
Question:	So from the RF output of this amplifier, can I connect this end to the input of a three way splitter
Answer:	The unit comes with the DC cord and needs constant power in order to operate.
Question:	Does the amplifier generate any heat
Answer:	Is not long rangh
Question:	Can I set this up next to my cable modem
Answer:	Just make sure the front of the detector is not completely obscured and you can mount it anywhere you want.

Product description

Expand your entertainment viewing options with the GE-branded Pro™ Digital 2-Way Coax Splitter. Whether you access your entertainment through a TV antenna, cable or satellite subscription or other device, this handy splitter lets you easily deliver the digital signal to multiple TVs for the best in high-definition entertainment. This coax splitter is designed to evenly distribute one digital signal to support TVs, DVRs, Blu-ray™/DVD players, cable boxes and more. It transfers audio and video for all brands of electronics using F-type connectors and is capable of handling frequencies of 5-2500MHz. Installation is easy. Simply use the clearly labelled, screw-on input and output jacks. Screw the coax connector from the signal source that you wish to distribute, such as your TV antenna, cable or satellite connection, onto the coax jack labeled “in” on the splitter. Screw in the coax connectors for the cables running to the TV or other device to any of the coax jacks labeled “out.” The compact design fits easily in tight spaces and integrates seamlessly with existing hardware. Experience greater entertainment with the GE-branded Digital 2-Way Coax Splitter.

• MULTI PURPOSE – This digital coax splitter is designed for use with HD TV signals, Satellite TV, and High Speed Internet Modems as well as Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
• FREQUENCY RANGE – Distributes a digital signal of 2.5 GHz (5-2500 MHz) frequency range
• 2 OUTPUTS – Splits a single digital signal to up to 2 devices, balanced, and with power pass through on all ports.
• GOLD PLATED CONNECTORS – Allows for optimal connectivity, corrosion resistance, and compatible with RG59 and RG6 coax cable.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	Would this allow inserted dc on one output port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs
Answer:	No. It doesn’t but it does fold in half if that helps.
Question:	Is each OUT port protected by a diode
Answer:	Hi, our beam body is made of wood+high density EVA, and beam lege is made of high density steel, beam leg is all welded, weight capacity for our beam is more than 300lbs. Could i know your gymnastics level? Then we could recommend you the right item. If any questions please let me know, we are all here for you. Marfula Service Team
Question:	does it have a male end
Answer:	hi, this type of balance beam could not be connected, could i know the length you need? then we can customize it for you. As you know, we are factory, design and produce them by ourselves, many gymnastics coach like our gymnastics equipment. If you have any requirement, please feel free to contact us, we will try our best to do the best suitable equipment for you.
Question:	what is the signal loss on this? 3.5 db or 7 db
Answer:	hi, number 6 is tan, it is one popular color for gymnast, and the leg of this type of balance beam is with wheel, move easily.

Product features

GE Digital 2-Way Coaxial Cable Splitter

Distributes a digital signal to multiple TVs

• 1 Input 2 Outputs (balanced)
• Distributes digital signal of 2.5 GHz : 5-2500 MHz
• Power Pass All Ports
• Compatible with RG59 and RG6 coaxial cable
• Gold plated connectors for corrosion resistance

Distribute one signal to two TVs

Compact for easy and out of the way installation

Works with all TVs and TV Antennas - regardless of brand

All RG59 & RG6 Coaxial Cables - all brands

Product description

Watch TV like never before with the GE UltraPro Hover Bar HD Amplified TV Antenna. Not only will you save money by eliminating pricey cable and satellite services with this indoor antenna, but you will also receive plenty of free local channels at no additional cost. Its slim design fits most HDTVs while its sleek, modern appearance will coordinate effortlessly into your home theater setup. The PureAmp Technology filters noise and amplifies signal for crystal clear reception. The integrated, low-noise amplification improves signal-to-noise ratio while boosting signal level at the antenna. With the ability to work 55+ miles of the broadcast signal, the GE UltraPro Hover Bar HD Amplified TV Antenna is the perfect way to maximize your HD viewing experience without an additional monthly cost.

• CUTTING EDGE DESIGN – Move away from flimsy antennas that don’t stay in place or flat panel antennas you can’t find a place for on your entertainment center or wall. Instead, allow our revolutionary antenna to hover above the TV. The revolutionary design increases mounting options to optimize signal reception
• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows in Full HD on channels such as ABC, NBC, CBS, PBS, Fox and much more with access to all the current events, sitcoms, kids, and sports programs without the monthly bill
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – Our indoor TV antenna has superior reception for both VHF and UHF signals, receiving uncompressed 1080p signal, 4K where available, and the Pure Amp Technology increases signal strength while reducing dropouts
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach 55+ miles from the broadcast signal and placed almost anywhere in your home. As new channels are made available, rescan your TV to allow the antenna to pull in the updated frequencies.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	can I connect more than 1 tv to this antenna
Answer:	Yes you can, but you should get a pre-amp booster, I got this one RCA TVPRAMP1R Preamplifier for Outdoor Antenna Performance Enhancement & Extension (use with ANT3038XR & ANT3036XR), Black. Helps with the signal loss. A must with two TV's. You will need a splitter. It is a single line out.
Question:	Approximately what is the size of the assembled antenna
Answer:	General Electric 33691 : 22.5"w x 2.25"h x .25" thick (plus mounting bracket)
Question:	Did anyone use an amplifier to help with reception? If so, what kind or type did you buy
Answer:	The amplifier usually doesn't help reception. What it does is boost the available signal from the antenna to the receiving TV/outlets. I have a splitter with 8 drops from the indoor antenna (NOT this one...mine is an older DB2 model but it is likely it would work the same...providing a signal to many distant rooms) to the rooms in a 3000+ sq ft house. The antenna (in 2nd floor bedroom) is about 20 ft from the splitter input port (basement). From the splitter the lines go as far as 50'or more. The amplified signal provides rooms the over 30 channels (counting sub/side channels) that we get. Our house is on relatively high land with pretty good view of the broadcast towers. Works very well. Love it. Add things like Roku and Amazon Prime plus anything else you want to pay for...we don't have any more.
Question:	will it work with a splitter for two tvs
Answer:	Mine does. I have it in the main line where the cable used to come in. It goes to a splitter in my house that feeds all the TVs in the house. Very clear picture to all.

Product features

GE Hover Amplified HD TV Mount Antenna

• CUTTING EDGE HOVER DESIGN – Mounts directly to the top of your TV in order to optimize signal reception and blends in seamlessly with your entertainment setup.
• FREE HD CHANNELS – such as ABC, NBC, CBS, PBS, Fox and much more without the expensive monthly bill (channels available will depend on your location - please research available channels before purchasing)
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach 55+ miles from the broadcast signal and placed almost anywhere in your home.
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – both VHF and UHF signals, receiving uncompressed 1080p signal and the Pure Amp Technology increases signal strength while reducing dropouts
• AMPLIFIER and AC ADAPTER INCLUDED

Before You Buy

Your Location and Surrounding Environment Can Affect Reception

Consider an Amplifier

This antenna includes an amplifier - it is recommended you test your channel reception with and without the amplifier to determine the best setup for your location.

Long Range HD Antenna

• Reach up to 55 miles from the broadcast signal
• Receiving uncompressed Full 1080p signal
• 4K UltraHD Ready

Multiple Mounting Options - Top of TV (Recommended)

• Top of TV (Recommended) - adjustable bracket allows you to easily place and secure to the top of your TV
• Wall Mount - mounting hardware included
• Tabletop - mounting bracket can be removed to lay flat on tabletop

Easy Setup + Amplifier

Easy setup and installation.

• It is recommended to perform a channel scan with and without the amplifier as channel availability and signal strength may vary

Tips for Best Performance

1. Before you purchase: visit www.antennaweb.org to find the available channels in your area
2. Position the antenna in as high as possible for best reception
3. Perform a new channel scan after installing and anytime the direction or position of the antenna is changed

Product description

Watch TV like never before with the GE Black Indoor TV Antenna Not only will you save money by eliminating pricey cable and satellite services with this indoor antenna but you will also receive plenty of free local channels at no additional cost Its slim and sleek modern appearance will coordinate effortlessly into your home theater setup The PureAmp Technology filters noise and amplifies signal for crystal clear reception The integrated low-noise amplification improves signal-to-noise ratio while boosting signal level at the antenna With the ability to work within 50 miles of the broadcast signal the GE Black Indoor TV Antenna is the perfect way to maximize your HD viewing experience without an additional monthly cost

• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows in Full HD on channels such as ABC NBC CBS PBS Fox and much more with access to all the current events sitcoms kids and sports programs without the monthly bill
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – Our indoor TV antenna has superior reception for both VHF and UHF signals, receiving uncompressed 1080p signal, 4K where available, and the Pure Amp Technology increases signal strength while reducing dropouts
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach up to 50 miles from the broadcast signal and placed almost anywhere in your home As new channels are made available rescan your TV to allow the antenna to pull in the updated frequencies
• MULTIPLE DISPLAY OPTIONS – The antenna includes an adjustable horizontal or vertical stand providing maximum stability and versatility of display
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8AM, Central Time to assist with any questions or issues.

User questions & answers

Question:	how do you select channels
Answer:	Normally, it can constantly stay super bright for 1.5 hours.
Question:	Does it work with a non hd tvs (old analog tv
Answer:	240 lumens.
Question:	What is the purpose of the ac adaptor? I plugged my antenna into the tv and it works without the adapter. So what does the ac adapter do
Answer:	The unit will work, yes
Question:	can i use an 18 foot coax cable
Answer:	If you pulled the front end off ( the LED end) it is the wrong end. The lens and the reflector will come loose and drop out. If you put them back and they are not centered and level you may have damaged the LED board when screwing it back on. This end is not meant to come off. The LED should light even if the front is off. To reassemble, put front end on flat surface with opening facing up, Drop in lens, then reflector, making sure they are pushed down all the way and centered. Holding the flashlight in vertical position ( switch up ) screw in slowly. If resistance is felt, unscrew again and make sure reflector is centered. Repeat until it screws all the way onto the light. Tighten securely so it won't loosen up and fall off. Now check the batteries. Unscrew switch end, look for corrosion, dirt, signs of battery leakage, etc. and clean if needed. Test batteries ( a volt meter or battery tester is handy to have ) or use new batteries and make sure they are both going in the same direction ( positive + end goes in first for both batteries ). If it does not work, try it once more with 2 other new batteries. Hope this works, but, if not, the flashlight has probably been damaged and you need a new one. This time you will know what not to do.

Product features

GE Crystal Amplified TV Antenna

• ABSOLUTELY FREE HD CHANNELS – Ditch expensive cable and satellite bills and continue viewing your favorite shows in Full HD on channels such as ABC, NBC, CBS, PBS, Fox and much more
• FULL HD CRYSTAL CLEAR TV AND HD SOUND QUALITY – Our indoor TV antenna has superior reception for both VHF and UHF signals, receiving uncompressed 1080p signal and the Pure Amp Technology increases signal strength while reducing dropouts
• LONG RANGE ANTENNA – This indoor HDTV antenna can reach up to 50 miles from the broadcast signal and placed almost anywhere in your home.
• MULTIPLE DISPLAY OPTIONS – The antenna includes an adjustable horizontal or vertical stand, providing maximum stability and versatility of display

Long Range HD Antenna

• Reach up to 50 miles from the broadcast signal
• Receiving uncompressed Full 1080p signal
• 4K UltraHD Ready

Built-in Adjustable Stand

• Built-in Stand for
  • Horizontal orientation
  • Vertical orientation
• Extendable / Adjustable Dipoles

Pure Amp Technology

• Boosts signal reception
• Helps filter noise
• Blocks 4G/5G LTE interference

Tips for Best Performance

1. Before you purchase: visit www.antennaweb.org to find the available channels in your area
2. Position the antenna in as high as possible for best reception
3. Perform a new channel scan after installing and anytime the direction or position of the antenna is changed