14 best cable signal booster amplifiers
Cable signal booster amplifiers are electronic devices designed to enhance the strength and quality of cable television signals. They are commonly used in homes and businesses to improve the reception of cable TV channels, especially in areas with weak or inconsistent signal reception. Here are some key points about cable signal booster amplifiers:
Signal Amplification: Cable signal booster amplifiers work by amplifying the incoming cable TV signal. This amplification increases the signal strength, which can help reduce signal loss and picture distortion, resulting in a clearer and more stable TV picture.
Signal Splitting: In many cases, cable signal booster amplifiers also have multiple output ports, allowing them to split the amplified signal to multiple TVs or devices. This is useful in homes with multiple TVs or entertainment setups.
Types of Boosters: There are different types of cable signal booster amplifiers available, including in-line amplifiers, distribution amplifiers, and preamplifiers. The type you need depends on your specific setup and requirements.
Placement: Proper placement of the amplifier is crucial for optimal performance. Typically, the amplifier should be installed near the point where the cable TV signal enters your home or building. This allows it to boost the signal before it gets distributed to your TVs.
Power Requirements: Some cable signal booster amplifiers require an external power source, while others can be powered through the coaxial cable. Make sure to choose an amplifier that suits your power supply setup.
Compatibility: It's important to ensure that the cable signal booster amplifier you choose is compatible with your cable TV service provider and the frequencies they use. Different providers may use different frequency bands, so check for compatibility before purchasing.
Installation: Installing a cable signal booster amplifier typically involves connecting it to the incoming cable line and the power source (if required). It's advisable to follow the manufacturer's installation instructions or seek professional installation if needed.
Benefits: The main benefits of using a cable signal booster amplifier include improved signal quality, reduced signal dropouts, and the ability to receive more channels and higher-quality content.This can be especially valuable in areas with weak or distant TV broadcast towers.
Maintenance: Cable signal booster amplifiers generally require minimal maintenance. Periodic checks for loose connections and ensuring the device is powered (if required) are typically all that's needed to keep it functioning properly.
Legal Considerations: In some regions, there may be regulations or restrictions on the use of signal boosters, so it's essential to be aware of any local laws or guidelines when installing one.
Overall, cable signal booster amplifiers can be valuable accessories for improving cable TV signal reception and enhancing the viewing experience, particularly in areas with signal challenges. However, it's important to select the right type of amplifier and install it correctly for optimal results.
Below you can find our editor's choice of the best cable signal booster amplifiers on the marketProduct description
The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.
- Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
- MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
- All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
- 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
- Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.
User questions & answers
Question: | May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable |
Answer: | I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose |
Question: | If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one |
Answer: | this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon |
Question: | Can this be mounted outdoors |
Answer: | If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY. |
Question: | Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home |
Answer: | No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers. |
Product description
IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.
A better signal means better TV with the GE-branded Indoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels. This low-noise amplifier boosts signal strength to compensate for cable loss and minimizes reception dropouts to strengthen the signal of available channels that your antenna is already receiving. The number of channels and the reception quality will vary based on distance from broadcast towers, antenna position and obstacles, including hills, buildings and trees.
Compatible with all brands, the amplifier easily connects to the coax cable from your antenna and then attaches directly to your TV—twist-on connectors mean no tools are required for installation. This amplifier is perfect for any indoor passive antenna and is powered using the included AC power adapter. Seeing is believing with the GE-branded Indoor Antenna Amplifier.
- SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
- LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.
- EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.
- IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees.
- U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.
User questions & answers
Question: | how long is the power cord |
Answer: | Hello Ermac, thank you for your question. Yes, as long as your Smart Roku TV has a coax port. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you. |
Question: | Has anyone tried using this to improve picture from an old game console (like an Atari2600 or Intellivision) that uses coax |
Answer: | Hi Charles, thank you for your question. The GE UltraPro Traditional Indoor Antenna is rated to work within 30 miles of the broadcast source. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday through Friday at 1-800-654-8483. Thank you |
Question: | How much does the amplifier boost the signal |
Answer: | This antenna was created to work in a sitting position. However, most other antennas are made to stand up straight. We have not tested the reception from the suggested position. It could work fine but we cannot guarantee that. |
Question: | most questions are about the antenna but, how well does the booster work - how many miles does it give, is it better than standard antenna boosters |
Answer: | Hello Thomas H. , thank you for your question. The coax is cable is 4ft long. |
Product features
GE TV Antenna Amplifier
Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
1. Connect TV Antenna to the Amplifier
2. Connect Amplifier to TV and AC Power Adapter
3. Perform a New Channel Scan
Add to Your Setup
Complete your overall entertainment setup with the indoor amplifier
- Antenna Amplifier
- TV Antenna (GE #43452 - sold separately)
- Universal Remote (GE 46195 - sold separately)
- Coaxial Cable (GE #33532 - sold separately)
Product description
The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-AR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-AR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. An Active Return Path is provided for continuity. The BDA-42-4-AR-R is and upgrade and replaces the former K-4 1-Port Signal Amplifier. The BDA-42-4-AR-R is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. Active return may not fix all of your problems if the product is not installed properly - or if the incoming cable signal is not problematic. Includes Coax Cable And Detailed Installation Instructions
- The BDA-42-4-AR-R is a bi-directional active return cable TV amplifier designed for use in homes. Boosts signal by 5x forward, 2x reverse. It is Manufactured by Arris.
- An active return path boosts upstream signal for broadband devices such as set-top boxes and cable modems. Active return is recommended when Upstream Modem power level is greater than 48 dBmV.
- Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
- NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH ANTENNAS. Active return amplifiers should not be used with antennas, and may cause total loss of OTA signals.
User questions & answers
Question: | Is this product ok for installation in a warm attic (phoenix, az)? is there an operating room temperature range |
Answer: | There are four connectors on the device (all coaxial rf f type ) . 1 for power, 1 for the input and the advertised 2 outputs. Essentially this is an amplified splitter with 2 outputs. |
Question: | Will this increase my internet download speed if I connect the coaxial from my inside wall to this device, then connect this directly to my modem |
Answer: | Not sure you’ll have to try beginning and end to see which works better. I have mine at beginning of long run. But I’m not a cable expert. |
Question: | Does it act like a splitter |
Answer: | Yes, or you could simply purchase the 4-port model, which is a bit cleaner. |
Question: | Will this help improve my signal on a channel master cm-2016 high vhf,uhf & hdtv outdoor hd antenna to boost my signal and run 3 tvs |
Answer: | Yes, since it is consuming power it will generate some heat and become warm to the touch. It can be used in hot environments up to + 60 degrees C. |
Product description
The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.
- The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
- Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
- Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
- NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.
User questions & answers
Question: | Can just help with poor internet signal |
Answer: | Sorry, If dvd player attached to Surround AV Receiver |
Question: | It does work analog and digital antenna |
Answer: | No you do not need more cables. The HDMI cable has both sound and video. You are going to have to trouble shoot each item starting with the cable. And work your way by eliminating each item. Is the cable new and have you used it before with any other device? My blue-ray worked straight out of the box however I had a dvd player already hooked up with HDMI so I simply used all of the same wires. If you had to test the blue-ray player then see if you can hook up some rca jacks the red yellow white ones to the audio portion of the player and the tv. That way you can at least see if you get sound from the blue-ray player. If you have a different device to use the hdmi cable with I would test that but if you have used the cable before and you know it works then yes, you need to start checking settings on the box or even the tv. |
Question: | will this work with my outdoor digital antenna |
Answer: | Samsung BD-H6500 vs. BD-J7500 BD-H6500 (2014 model) versus BD-J7500 (2015 model)BD-H6500 may be the best choice1) Considerably lower price2) Same user features, i. e., 3D, UHD passthrough & upscaling, etc.3) BD-6500 has excellent reviews4) Both have dual core processors for fast load speedMajor consideration is in your current entertainment system:1) BD-J7500 is a better choice for those with older HDTV's that do not have 4K UHD pass-thru as it includes (2) HDMI out. That allows connecting (1) to the HDTV and the second to an older HDMI equipped audio receiver to achieve digital audio pass-thru It also includes 7.1 analog connections for older style audio receivers.Read full review |
Question: | I currently have hdtv antenna but i have keep moving it because my local channel keeps pixilating or too low of a signal. will this help me |
Answer: | If you have a 4K TV, it will display the signal it's fed. If you don't have a 4K blu-ray disc then it will upconvert as best as possible but unless you have a 4K player with a 4K blu-ray disc will your 4K TV be able to put out all true 4K in all it's glory. Some blu-ray players enhance or shall we say upconvert the reg blu-ray disc better than others but I'm sure you won't be too disappointed. As time goes by, 4K discs and more 4K movie content will become more abundant and you'll be ready for the future. |
Product description
There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-1-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifier will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-1 Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.
- The BDA-42-1-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 32x in the forward path
- Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
- Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" connection cable included.
- NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.
User questions & answers
Question: | Is this amplifier compatable with cable internet service |
Answer: | I don’t know. It’s purpose is to boost the signal at the point of contact. So when the cable enters the amplifier the signal can travel further distance before arriving at the TV without loss of signal strength |
Question: | Does this boost your return signal |
Answer: | Passive Return = no return boost. |
Question: | Im not getting my sattelite to work through our camper hook up for sattelite...will this get my signal to recieve so i dont have to run cable inside t |
Answer: | I'M NOT SURE. I HAVE THIS UNIT CONNECTED TO AN OUT DOOR TV ANTENNA. WORKS WELL AS LONG AS THE ANTENNA IS IN THE RIGHT LOCATION TO RECIEVE THE TV SIGNALS. |
Question: | What is the gain in db, of this unit. I have a 15db amplifier now and I need a bit more |
Answer: | 10-15 dB gain depends upon the frequency range. |
Product description
Introducing the Digital Signal Amplifier by THE CIMPLE CO.
This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.
Added Bonus:
For Best Results:
THE CIMPLE CO
- Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
- Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
- Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
- Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
- Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty
User questions & answers
Question: | Waterproof for outdoor use |
Answer: | It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet |
Question: | what is the adjustable range |
Answer: | does not include numbers just bigger or smaller range |
Question: | Does the output go to the tv |
Answer: | Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms. |
Question: | I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set |
Answer: | We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV. |
Product description
This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+8dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges. Includes Amplifier, Power Supply, 36" coaxial cable and two 75-ohm port terminators.
- Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
- Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards.
- 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
- 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
- PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.
User questions & answers
Question: | What is an arpi2000 power inserter |
Answer: | A way to power the amp, but since this package comes with a DC power supply, and has a place to connect the supply with the provided cable, you don't need a power inserter. |
Question: | The install mentions a grounding wire. Does this device need to be grounded to work? Thanks |
Answer: | Grounding is recommended. Grounding can protect the device from surges or perhaps lightning strikes. Consult with an electrician for proper means of grounding. |
Question: | Will this work to boost internet signal? i don't have cable tv - our house is about 300 ft from the road and that seems to degrade our internet speed |
Answer: | If you have cable internet (only) you would like be better off with an "active return " amplifier. The only way to really know that for sure would be to check your cable modem for proper signal levels. I would not buy this if you're specifically trying to boost cable internet. |
Question: | How long is the power cord |
Answer: | Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators. |
Product description
This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+7dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.
- Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
- Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included.
- 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)
- 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
- PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
User questions & answers
Question: | If I have to run 15' of RG6 coax to the power port, will this affect the operation of this unit |
Answer: | According to data I received on this amp it can be run out to a PA. |
Question: | Can I split the signal coming out of one output |
Answer: | You could play a bass through it but it was definitely designed for electric guitar. I believe orange makes bass amps. |
Question: | Will this work, with a digital tv antenna |
Answer: | No discreet remote available as far as I know. Your phone or tablet with the Spark app, however, works as a full function remote, controlling and overriding every knob on the amp. The app also gets you over 10,000 downloadable tones. Great amp for practice and small venues. Much more than I expected. |
Question: | So the adapter plugs into a wall outlet and connects with a coaxial cable to the amplifier and the amplifier connects between an antenna and the TV |
Answer: | Yep. It’s the same. I had to order this bc they wouldn’t ship to AK. |
Product description
The Antronix MicroAmp provides subscriber premise amplification in a small convenient package. The one output micro-housing allows all ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.
Our patented CamPort® provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.
• Micro-Housing
Our micro-housing offers the convenience of a small package without sacrificing
performance.
• Port Configuration Ideal for NID Enclosures
The micro-housing allows all output ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.
• CamPort® Auto-Seizing F-port
Patented auto-seizing F-port features a “Cam Activated Mechanism” to provide full contact pressure (>2,000 grams) on the center conductor for maximum reliability.
• 3 dB Noise Figure
Provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.
• 6 kV Combination Wave Surge Protection
Unique surge protection on all ports without the use of arc gaps which may cause high impulse noise during discharge.
• 15 psi Sealed SCTE Compliant CamPort®
Sealed brass CamPort® prevents water migration.
- The micro-housing allows all output ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.
- Patented auto-seizing F-port features a “Cam Activated Mechanism” to provide full contact pressure (>2,000 grams) on the center conductor for maximum reliability.
- True 5-42 MHz return band and full 1 GHz downstream spectrum for more useable bandwidth.
- Unique surge protection on all ports without the use of arc gaps which may cause high impulse noise during discharge.
- Self-resetting circuit protection provides safe protection against short-circuits to minimize maintenance costs.
User questions & answers
Question: | Will it work at end of long cable run |
Answer: | the firmware is upgradable, I am not certain if we have an upgrade out for that model yet (it is very new) but you can use windows and mac to update. |
Question: | So from the RF output of this amplifier, can I connect this end to the input of a three way splitter |
Answer: | The unit comes with the DC cord and needs constant power in order to operate. |
Question: | Does the amplifier generate any heat |
Answer: | Is not long rangh |
Question: | Can I set this up next to my cable modem |
Answer: | Just make sure the front of the detector is not completely obscured and you can mount it anywhere you want. |
Product description
This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+7dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception. The unit can be used with Cable TV, OTA Antennas (Analog or Digital) as long as they are non-amplified. If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! This product provides exceptional home signal amplification in a small convenient package. It is ideal for both indoor and outdoor applications.
- Allows you to connect up to four devices to one cable connection without losing signal.
- Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
- PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
- Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. NOT FOR USE WITH SATELLITE SYSTEMS.
Product description
The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply, F59 Terminators, and custom 3 foot Reliable Superflex power cable are included.
- Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
- MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
- All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
- 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
- Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Complete kit includes Amplifier, Power Supply, three F59 terminators and Reliable Cable Superflex power connection cable.
User questions & answers
Question: | Can this be used with Verizon Fios |
Answer: | The gain tapers off at 1002Mhz. That is good for cable modems that are DOCSIS 3.0 and below. If you have a DOCSIS 3.1 modem, the frequency range extends to 1800Mhz. You will have reduced performance for the latest cable modems. |
Product description
The Channel Master Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 offers four amplified output ports allowing connectivity for up to four televisions without losing signal strength. Channel Master distribution amplifiers will work with all TV antenna installations. In addition, these HDTV signal amplifiers can be used with analog and digital RF distribution applications such as Cable TV where high performance and reliability are required.
The Ultra Mini 4 distribution amplifier is ideal for TV antenna installations with up to four televisions. Regular splitters will cause significant loss of signal strength which equates to poor picture quality, pixelation and channel dropouts. These amplifiers allow users to split and run their TV signal to multiple televisions in the home without risking a drop in signal strength.
The Ultra Mini HDTV Signal Amplifiers include a heavy-duty powder coated housing and weather-sealed ports allowing for indoor or outdoor installation in virtually any climate.
- Four Amplified Output Ports (8 dB)
- Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)
- Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
- Miniature Size for Space-Saving Installations
- Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate
User questions & answers
Question: | Can this be used with an antenna preamp |
Answer: | Yes, I have a preamp running in front of this device. Doing great. If you're asking if it can be used as an antenna preamp then no. |
Question: | i have a horse trailer with a roof mounted digtal antenna. will this increase my reception power |
Answer: | I'm guessing the other 2 respondents might be correct, but the only reason I bought this unit was to amplify the signal I get through Time Warner cable system. This unit is supposed to amplify a signal 15%. What I don't know is if it would amplify a signal through a roof mounted digital antenna. I only paid $15 for mine and it might be worth the gamble. |
Question: | Can this item be used near the TV or does it have to go in the attic next to the antenna |
Answer: | For the best performance it is better to locate the amplifier close to the antenna, not the TV. This maximizes the signal-to-noise ratio, which provides the best reception. In some cases it can be very inconvenient or impractical to place the amplifier close to the antenna, in which case you can try in a more convenient location. Maybe your results will be acceptable. But if performance is only so-so, you may want to make the effort to get the amplifier closer to the antenna. Other considerations: 1. If you get an amplifier don't be fooled into thinking that more "more dB gain is better". It's not necessarily. Very high gain amplifiers can be more prone to saturation and intermodulation, which can make your TV reception worse. 8-15dB gain probably should do the trick unless you've got other problems, such as... 2. a bad TV receiver; 3. a bad or inappropriate antenna. If you're using an old antenna that wasn't designed for digital TV, it may be better to replace the antenna than to add an amplifier to an old antenna that is digital TV compatible; 4. antenna coax cable that is too long or poor quality. Don't use crummy antenna cable. Don't use pitiful RG58. RG59 at least, with quad shield. If you're a real stud, you might consider RG6. And use good connectors. This may mean buying a good quality connector crimper, not some sorry piece of junk. |
Question: | Can the dB gain ever be too much for a TV |
Answer: | dB is a ratio, and without a reference, doesn't have a value. Signals from an antenna are almost always in the micro-volts. The 4 output amplifier has a gain of 8dB, which is about 2.5, so the likelihood of overloading the TV's input is low, and if you have enough signal to do that, you wouldn't need an amplifier. |
Product features
4-Port HDTV Signal Amplifier
Channel Master has been at the forefront of over-the-air broadcast entertainment products and solutions, providing the highest quality and value to consumers since 1949. Headquartered in Chandler, Arizona (Phoenix), Channel Master offers a complete portfolio of over-the-air TV antennas, OTA DVR's, TV antenna mounting equipment, amplifiers, cables, connectors and more.
Ultra Mini 4
The Ultra Mini 4 distribution amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The Ultra Mini 4 has four output ports and can be used in HDTV, CATV, off-air, analog and digital RF distribution applications where high performance and reliability are required.
What's Included
• Ultra Mini 4-Port TV Signal Amplifier
• Power Adapter
• 6ft RG6 Coaxial Cable
• User Guide
Features
• Four Amplified Output Ports (8dB)
• Works with all TV Antenna & CATV Installations
• Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
• Miniature Size for Space-Saving Installations
• Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate
Product description
This amplifier provides 8 ports for multiple TV sets, cable boxes, or cable modems. It boosts signal strength by more than double (+4dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! It is compact and easy to install. Connect to the drop (main line) and eliminate the need for additional splitters, which reduce signal strength. It ships with everything you need to complete the installation, including comprehensive installation notes. The Unit can be used with Cable TV, and OTA Antennas. This amplifier provides the exact specs as other brands that are selling for much higher prices. This amplifier is designed to fit into smaller spaces, while providing the FULL performance of larger sized amplifiers. Includes Power Supply and detailed Installation Instructions.
- Allows you to connect up to eight devices to one cable connection or antenna without losing signal.
- Eight port amplifier with a passive return path provides an increase of +4 dB per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
- PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
- Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. NOT FOR USE WITH SATELLITE SYSTEMS.
Product description
This is a brand new, four port cable television drop amplifier, similar to the products that your local cable company uses to correct their system's shortcomings. The amplifier allows you to connect up to four devices to a single input connection, without losing signal strength like you would with normal splitters. It boosts signal strength in an intelligent manner, by limiting the naturally stronger signals on the low frequency range and boosting the frequencies on the higher end. Since TV signals tend to natually lose strength on the high frequencies faster than the low frequencies, you are less likely to over-amplify your TV signals and cause further problems. The LSA48 provides a minimum of 0dB gain (which means no signal loss) on the low frequency end (54MHz) up to a +7.5db (approximately 5x signal gain) on the high end 1000MHz end. It improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! Ideal for both indoor and outdoor applications, the LSA84 was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.
- This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
- Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
- Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
- Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
- Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.
User questions & answers
Question: | What db Noise rating |
Answer: | everything makes of noise some we can hear and some our ears are not sensitive enough to hear I believe they are giving you the the noise level that this produces but double check my answer |
Question: | I'm not a tech by far so my question is the item has two connectors on the top so is that for a OTA antenna and an internet cable connection |
Answer: | No - if you look at the picture, you can see the left connector is for powering the amplifier. the right connector is for signal input. You cannot connect cable and OTA at the same time. |
Question: | Does this include the splitter (power injector) to be used with the power in/rf out port |
Answer: | The remote power option is not included with this item. You can connect a cable up to 100' from the power supply. |
Question: | how does this connect to the power adapter |
Answer: | Any length of standard coax cable will work - no longer than 100'. We are working on a new kit with a"super flex" power cable so that you won't have to buy one - but the cables are still in production and won't be available for a while. |
Latest Reviews
View all
High School Supplies
- Updated: 29.01.2023
- Read reviews

Natural Sunscreen With Spfs
- Updated: 22.02.2023
- Read reviews

Wall Clocks For Clinics
- Updated: 30.05.2023
- Read reviews

Claddagh Rings
- Updated: 07.07.2023
- Read reviews

Zipper Folios
- Updated: 23.05.2023
- Read reviews