13 best uniden cb radio antennas

Product description

This Cb radio antenna has 28 inch long and it is compatible with all CB Radio

Uniden: BEARCAT 880 CMX760 PC78LTX PC787

Cobra: 29LX 29LTD 29NW

Miland: 75-822 5001Z 1001LWX

Galaxy: DX-959B DX-949

President: McKinley USA ect



Magnetic mount

Center coil-loaded heavy duty spring

2 sections

Cable: 10 Feet(3M)

Extends to 28 inch(0.7m)

Magnetic base: 88mm

Impedance: 50Ω

Frequency: 27Mhz



Warning! Observe the maximum height on roads where will drive so that the antenna does not touch any installations or construction.

• 1.Long Antenna - TALLER ANTENNAS = BETTER RANGE! 28 Inch long for ultimate range & receiving!
• 2.FULL KIT - includes magnet mount with pre-intalled 10ft of coaxial cable, coil load, and stainless steel whip.
• 3.Magnetic base - Improve reception by harnessing large metal surfaces.
• 4.Weather Channel Capable, Covers all CB frequencies.
• 5.Warranty would be valid for 12 months against manufacturing defect.

User questions & answers

Question:	how come swr plays tricks sometimes! weather- atmosphere- like clouds- ect
Answer:	Because radio waves, AM,FM,HF are all Electromagnetic.
Question:	my antenna fluctuates at times checking the swr- after a couple of 2- 3 seconds it settles on a number and stays- not high swr- 1:5 or 6 - a problem
Answer:	1:5
Question:	Can you trim this to tune it? My swr is way to high during calibrating and wont go down
Answer:	never had to. my swr is 1.0. but i believe there is a tuning port on the base, uses a hex driver.
Question:	my antenna fluctuates at times checking the swr- after a couple of 2- 3 seconds it settles on a number and stays- not high swr- 1:5 or 6 - a problem
Answer:	Yes : A problem,If it's 1.5 or 2 that's cool but 6..NO do not key your mic at 6

Product description

PRO520XL - Compact Professional Mobile CB Radio ANL Switch Compact Size Full 40 Channel Operation Instant Channel 9 PA/CB Switch RF Gain S/RF Meter

• Includes Uniden PRO520XL CB Radio w/7W Audio Output

• [Specifications of CB Tactical Antenna]Connector:BNC Male(not TNC); Frequency: 27MHZ; VSWR:<1.5; Impedance:50Ω; Maximum Power Input-watts:20W; Height:108cm(42.5inch); Weight:150g
• [Foldable 27MHZ Tactical Antenna ]It can be folded to a manageable size to use at will,You can easily put it in your backpack,easy to carry and install, make it more convenient for outdoor activities;it is safe to receive with the antenna folded, But it may harm the radio if you transmit with the antenna folded
• [High Quality Material]Antenna made of high quality durable ABS material,high strength and good toughness,lightweight,flexible,Excellent wear resistance;good waterproof effect,Suitable for all kinds of environments,It can be used at extremely low temperatures
• [Excellent Signal boost]Improve the reception and transmission of your Handheld/Portable CB Radio,Significantly boosting the signal of your radio,extend the talk distance
• [Greatly convenient for outdoor or indoor activities]It suitable for Outdoor adventure, hiking, climbing, traveling and camping and any other outdoor activities,make your outdoor work more convenient

Product features

Foldable Tactical Antenna

it is safe to receive with the antenna folded, But it may harm the radio if you transmit with the antenna folded.

Tactical antenna is much more durable than the general whip antenna, not easy to damage, easy to preserve and flexible use.

Excellent Signal boost

Improve the reception and transmission of your Handheld/Portable CB Radio,Significantly boosting the signal of your radio,extend the talk distance.

Each cb antenna is tested by professional equipment more than threes times, all our product made of high quality material and provide excellent performance.

Unique appearance design

We pay attention to the details of product

The red rubber ring is designed for the antenna's aesthetics.

Super thick antenna base

High quality antenna base,greatly protect the antenna and the radio, make it more firmly to be installed.

International standard BNC-Male connector

Compatible with Cobra handheld cb radio: HH50WXST HH50 MRHH350FLT C75WXST HHRT50；

Compatible with Midland handheld cb radio: 75-822 75-785 MHS75

Compatible with Uniden handheld cb radio: BC75XLT PRO401HH PRO501HH BC125AT

(27MHZ Tactical Antenna working for all BNC 27MHZ Handheld CB radio)

Packing includes:

1* TC-CB108F 27MHZ handheld cb radio antenna

Note: Please avoid exposing the antenna to sunlight for a long time, which may affect its service life

Technical support:

UAYESOK-HF Store (If you have any questions about the product, we'll be happy to serve you.We will reply to you within 24 hours)

Product description

Uniden BEARTRACKER 885 Hybrid Full-Featured CB Radio + Digital TrunkTracking Police/Fire/Ambulance/DOT Scanner w/ BearTracker Warning System Alerts, 40-channel CB, 4-Watts power, 7-color display.

• The BearTracker 885 does what no other CB Radio can do: It can keep you up-to-date with current public safety activity in US and Canada by scanning for Police, Fire, Ambulance, and/or DOT radio traffic.
• BearTracker Warning System, Alerts you when nearby public safety transmissions are detected. Included GPS allows you to automatically select nearby channels from its nationwide database.
• Full-featured CB Radio with 40-channel CB operation, 4-Watt RF power, a 7-color display, a SWR meter for precision antenna tuning, RF Gain, Mic Gain, PA mode, Talkback, and NOAA Weather with Alerts.
• The Scanner feature operates alongside the CB radio features, there is no switching back and forth between modes; just press a button and you’re listening to Police, Fire department, etc. , while standard CB channels are active.
• The ergonomic noise cancelling microphone is designed to enhance your transmissions, even in the noise environment of a tractor-trailer cab.
• Included Components: 1 Scanner

User questions & answers

Question:	I know this might sound stupid, but I am looking to get this for my Husband (a truck driver). What do sidebands do? When would you use this? Just wondering if I should get him this one or the 880... Thanks
Answer:	If your husband wants or needs a radio capable of operating on sidebands, this is NOT radio for him. You would need to get the 980 model rather than this 880 model. Normally truckers operate on AM mode rather than sideband. However a few truckers who have Sideband capable radios will use sideband when they get further apart or can't get a good signal on AM. But the majority don't use sideband.
Question:	can you use this CB in the house
Answer:	Yes. You will require -1) An regulated power supply that converts AC electricity to DC. The voltage you want is a constant 13.8 VDC (not 12 volts, you won't get full power) and which can supply a minimum of 5 amps under load.2) Do NOT press the microphone button until all steps have been completed.3) You will need to mount an external CB antenna at least 9' above the roof line. If you use a mast, it must be guyed every 10' above the last (highest) physical attachement to the house.4) You will need to properly ground the antenna mast to a copper clad ground rod (between 4' and 10' long depending on soil conductivity for your location dry sand: bad: 10' / wet rich soil: excellent: 4')5) You will need to properly ground the chassis of the CB to the exact same point that the mast is grounded to on the grounding rod. This is the step that most radio noobies skip. DON'T skip it.6) It is highly suggested you purchase a ground shunt (static discharge) for your coax; and yes, connect it to the same exact spot on the grounding rod.7) Try and purchase the highest quality 50-ohm coax you can afford. If you can afford Timesmicrowave LMR-400, then that would be your best bet. Try not to use coax more then a few feet longer than you need, and beyond that always allow 2 extra feet for a 'drip loop' at the bottom just before where it comes into the house.8) Wrap the PL-259 connectors with weatherproof coax tape to seal the connections from rain/snow/condensation. If you want to overkill it, then put a shrink wrap tube over the top of the tape.9) Secure the coax GENTLY but securely every 3 feet along the mast. A UV-resistant piece of flexable plastic 2" wide by 6"long wrapped around the coax and the mast (all at once) and secured with UV-resistant tie-wraps would be a good idea.10) Calibrate your 980SSB's internal SWR meter and then check you antenna system SWR to make sure it is less than 1.5:1 (mine is 1.0:1, a perfect match). If required (never use beyond 3:1), 'trim' your antenna to get a better SWR (most don't require trimming).11) Sometimes a CB antenna will require a physical ground plane at the antenna base; but most of the times in a base setup, not.12) Re-read your Uniden BC980SSB manual to make sure nothing has been missed in your setup.
Question:	Hello. I am looking to buy this for my husbands 1998 Jeep cherokee XJ..Will this be good for that? And also what other parts are needed
Answer:	Hello, yes this is a nice radio that would be fine in that vehicle.With this said, along with the radio you will need the following items:Cigarette lighter 2 wire power cord, magnet mount antenna. These items can be bought on Amazon or you can get them at a truck stop.I recommend Amazon because of a lower price and free shipping and the secret nature of being able to hide your purchase if it's a surprise gift.Truck spec is a cheap brand for the 2 wire power cord and for the antenna I recommend one of the following: K40, Wilson 1000 or the Wilson 3000 magnet mount antennas.Those come with the antenna wire already attached to the magnet and all he would do is run the wire through the hatch or the rear door after mounting the antenna on the roof. It's really easy to do. Just hide the wire under floor mats and beside the seat up to the dashboard to the CB.Now if you are looking for a better radio and easier to use right out of the box, I recommend Galaxy or Connex as these are rock solid and all the knobs are right there on the front of the radio unlike this modern radio with most of the adjustments in menus which made me feel like I had to relearn everything over again. I prefer direct access.This Uniden Bearcat 980 has an annoying beep sound every time you change the channel. Those two other brands of radios I mentioned are more expensive but are what the big boys in my industry use in their big rigs. You should be able to compare the features of the Bearcat 980 with those of a Galaxy or a Connex CB and go on that alone to match up what you want. I read the other two answers you got, Why did they even bother...I hope this helps and as always just ask if you need more info.
Question:	I asked if it was 100% new or a refurb and you deleted the question. I am now processing a refund/return on this item. Thanks for being a legit seller
Answer:	I ordered and paid for a NEW Bearcat 980SSB from gadget-town and got a refurb/used item. If you check that seller's 100% positive reviews you will find others have had the same experience, yet Amazon has crossed out those reviews and returned the seller's 100% positive rating. Take that as you will.

Product features

Digital Trunktracking Scanner

Receive police, fire, ambulance, and DOT dispatch transmissions wherever you are in the US and Canada*

BearTracker Warning System

Legal alternative to Radar Detectors. Alerts you when nearby public safety transmissions are detected.

GPS Included

Allows the BearTracker 885 to automatically select nearby scanner channels to monitor.

Product description

The HG A1000 is a 21 inch low profile base-loaded magnet mount antenna designed for use on most personal vehicles.

• BUILT TO OUTPERFORM THE COMPETITION - A non-abrasive heavy duty 4 inch magnet ensures that once the antenna is placed, it will stay there as long as you need it to.
• EASY INSTALL ON ANY VEHICLE - Securely install on the roof or trunk of any vehicle and enjoy quality signal reception. Feel confident in your ability to communicate clearly with other drivers on the road.
• THE ULTIMATE RECREATIONAL MAGNET MOUNT ANTENNA - ideal for trucks, SUVs, and recreational vehicles this antenna will stay on when you need it, but is completely removable when not in use. 15 feet of matched-braided coaxial cable to attach to any CB or 10 Meter radio RF PL259 connector.
• WORKS WITH ALL CB & 10 METER RADIOS - 100 watt rating with Broad-banded frequency of 26-30MHz and weather channel ready

User questions & answers

Question:	Will this attenna work with Cobra 19 lll CB
Answer:	Yes, the HG A1000 is compatible with all Cobra CB radio's including the 19 series.
Question:	Will this work with the cobra 29ltd 40 channel cb
Answer:	It will work but It's hard to talk to others. The frequency it puts out is not that strong I recommend a Wilson 1000 2000 3000 5000
Question:	How long is the wire from the antenna
Answer:	From the magnetic base to the tip of the antenna in 30".
Question:	Will this antenna work with the Cobra 19 Ultra iii
Answer:	yes it should be compatible with the CB radio

Product description

Description:

1. All of our items are brand new.

2. Model: AR-152A

3. Connector Type: BNC

4. Band: Dual Band VHF/UHF.

5. Frequency: 27MHz

6. Gain: 3.5 dBi.

7. Max Power: 20Watts.

8. V.S.W.R: Less than 1.5

9. Impedance: 50ohm.

10. Style: Soft antenna.

11. Antenna length: 108cm/42.5in

12. Weight: 150g.

Applicable Model:

HandHeld CB radios: Cobra, Midland, Macon, Anytone and Radio Shack with a BNC Connector



Notice: If your radio model is not compatible, please see my other item or email us your model number, then, we will help you find one that suits for you.

Package Including:

1X AR-152A 27MhZ BNC Tactical Antenna

• This CS Tactical Antenna is almost 108CM/42.5Inch long and is a must for outdoor and camping usage. This is a flexible antenna able to withstand more 'roughness' than other antennas, all while boosting the signal of your radio significantly! Eextend the Range of your Communication.
• Tactical Antenna BNC Connector for use with Portable Handheld CB Band Radios, transmit or receive,Operates with CB Radios in 27 Mhz range.For the best performance and highest call quality, operate on a channel within this frequency range
• Frequency: 27Mhz Gain:3.5dBi Power:20W
• COMPATIBLE WITH ALL HAND HELD CB RADIOS – Use this antenna on all Hand Held CB radios from Cobra, Midland, Macon, Anytone and Radio Shack with a BNC Connector. Add range and quality to your CB reception.
• Certified Original ABBREE Antenna, New version, New package, Better quality.To avoid counterfeit models - insure your listing shows "sold by ABBREE"

User questions & answers

Question:	Can you transmit with this antenna folded
Answer:	Don't do it! It will damage the radio with a SUPER HIGH SWR...
Question:	Has anyone tested this antenna for the 10m band
Answer:	It's not "tuned"for ten meters, just 11 meteres & is not adjustable. You will suffer from a high SWR & possibly ruin your radio!
Question:	Will this work with a baofang radio
Answer:	yes it will work with any radio that has a bnc connector and is 27 mhz it will not work with a uhf or vhf radio it is a great antenna very powerful i am amassed by the performance of this antenna
Question:	Will this fit the old realistic trc 221 where the ext antenna jack is
Answer:	No it directly replaces the antenna.

Product description

Uniden creates another first with the SDS100 true I/Q scanner, the first scanner to incorporate software defined radio technology to provide incredible digital performance in even the most challenging RF environments. The sds100’s digital performance is better than any other scanner in both simulcast and weak-signal environments. The SDS100 is also the first scanner that allows you to decide what to display, where, and in what color. Custom fields put the information important to you right where you need it. And, one more first, the SDS100 meets JIS4 (IPX4) standards for water resistance. USB Connectivity and Charging

• SDS100: True I/Q receiver design for improved digital performance in weak-signal and simulcast areas
• SDS100: Rugged/ weather resistant jis 4 construction
• SDS100: Li-Ion battery
• SDS100: Improved UI with 3 contextual soft keys that Change function based on the current operation
• SDS100: Customizable color LCD: user can modify color and what is displayed

User questions & answers

Question:	Will it receive 800 mhz state, county and local police transmission
Answer:	No computer necessary. You can receive digital and analog signals for all fire and police, etc. it is also portable you can take it with you. A bit hard to program, but worth it.
Question:	Does this decrypt encrypted police transmission
Answer:	the basic unit is 7-3/8" wide, 5-1/4" deep and 2" thick, if you add on the mounting bracket with thumb screws its 8-7/8" wide, with the enclosed at unit measures 6-5/8 deep. Hope this helps you. Safe trucking, REACT LM 131.
Question:	Will it pick up cell phone frequincies
Answer:	Electricity 110 and 12 volt for vehicles
Question:	Can the sds 100 be updated using chrome os? or does it have to be a windows os
Answer:	It has the p25 digital system digital AGC p25 NAC functionality but as far as phase 11 I'm not so sure about I don't see anything about that !!! Mike....

Product features

HomePatrol Database

Includes all known radio systems in the US and Canada. The database is updatable with the Sentinel software and Uniden updates the main database weekly.

Water Resistant (JIS4/IPX4)

Resistant to dust and damage caused by splashing water from any direction (when all jack covers are in place).

Customizable Color Display

You can set the display color for each field in the display. Additionally, for many fields you can select the information provided.

• Frequency Range: 20MHz - 1300MHz; Compatible with: Public Radio Scanner, Ham Radio, Two Way Radio, Walkie Talkie, Mobile Radio; VSWR: < 2.0; Impedance: 50 ohm; Feature: Magnetic Base Mounting; Cable Length: 3m / 10 feet; Antenna Connector: BNC Male Connector; Package List: 1 x Antenna (As the Picture Shown);
• Compatible with Uniden Radio Scanner: SR30C, Bearcat BC125AT, BCD436HP, BC75XLT, BCD325P2, BC355N, BCD996P2, BC365CRS, BCT15X, BCD536HP, BC345CRS, BCD996XT, BC278CLT, BC350A, BC350C, BC355C, BC340CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330;
• Compatible with Whistler Radio Scanner: WS1040 WS1088 WS1010 WS1080 WS1025 WS1065 TRX1 TRX2;
• Compatible with Radio Shack Radio Scanner: PRO-2018 PRO-197 PRO-650 PRO-163 PRO-405 PRO-528 PRO-668 PRO-94 PRO-404 PRO-95 PRO-62 PRO-83;
• Compatible with Ham Radio: Kenwood TK100, TK200, TK210, TK220, TK300, TK310, TK320; Icom: IC-V8, IC-V80, IC-V82, IC-U82 ,IC-W32; Motorola: HT440, HT90; Maxon: HR, CP500, CP520, 1015; Vertex Standard: 734, 834, HR146, HX300, HX320, HX400, CU32, CP/CS 5015, 0420; Uniden: HH979; Wilson: HH152, HH154, HH156, HH462, HH464;

User questions & answers

Question:	What is a good indoor antenna for a UV 82 8 Watt ham radio baofeng, to use as a base station
Answer:	I have a Midland 75-822 about half a mile is all I get to other portable units.
Question:	What is the maximum watts it can handle
Answer:	It will work with a standard PL259 connector radio with a BNC adapter (get a 90 degree BNC adapter if you’re using for a mobile radio). It’s really designed for a handheld radio.
Question:	How tall is the antenna
Answer:	It will fit a stock pro 401hh!!! Works well too, the next step is a telescopic antenna for longer range.
Question:	Can this be outside year round
Answer:	i think it is only 16.2, I have no trouble lifting it with one hand.

Product description

Specifications:

Gain: 5dBi

Frequency Range: 20MHz - 1300MHz;

Compatible with: Amateur Radio; Car Mobile Radio; Handheld Ham Radio; Two Way Radio; Public Radio Scanner;

Feature: Magnetic Base Mounting

VSWR: < 2.0;

Impedance: 50 ohm;

Direction: Omni-directional;

Cable Length: 3m

Cable Connector: BNC Male Connector

Net Weight: 78g;

Operating Temperature: -20°С ~ +80°С

Storage Temperature: -30°С ~ +85°С

Package List: 1 x Antenna (As the Picture Shown)



Compatible with Radio Scanner:

Uniden Radio Scanner: SR30C, Bearcat BC125AT, BCD436HP, BC75XLT, BCD325P2, BC355N, BCD996P2, BC365CRS, BCT15X, BCD536HP, BC345CRS, BCD996XT, BC278CLT, BC350A, BC350C, BC355C, BC340CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330;

Whistler Radio Scanner: WS1040 WS1088 WS1010 WS1080 WS1025 WS1065 TRX1 TRX2;

Radio Shack Radio Scanner: PRO-2018 PRO-197 PRO-650 PRO-163 PRO-405 PRO-528 PRO-668 PRO-94 PRO-404 PRO-95 PRO-62 PRO-83;



Compatible with Ham Radio:

Kenwood: TK100, TK200, TK210, TK220, TK300, TK310, TK320;

Icom: IC-V8, IC-V80, IC-V82 , IC-U82 ,IC-W32;

Motorola: HT440, HT90;

Maxon: HR, CP500, CP520, 1015;

Vertex Standard: 734, 834, HR146, HX300, HX320, HX400, CU32, CP/CS 5015, 0420;

Uniden: HH979;

Wilson: HH152, HH154, HH156, HH462 , HH464;

• Frequency Range: 20MHz - 1300MHz; Compatible with: Public Radio Scanner, Ham Radio, Two Way Radio, Walkie Talkie, Mobile Radio; VSWR: < 2.0; Impedance: 50 ohm; Feature: Magnetic Base Mounting; Cable Length: 3m / 10 feet; Antenna Connector: BNC Male Connector;
• Package List: 1 x Antenna (As the Picture Shown);
• Compatible with Uniden Radio Scanner: SR30C, Bearcat BC125AT, BCD436HP, BC75XLT, BCD325P2, BC355N, BCD996P2, BC365CRS, BCT15X, BCD536HP, BC345CRS, BCD996XT, BC278CLT, BC350A, BC350C, BC355C, BC340CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330;
• Compatible with Whistler Radio Scanner: WS1040 WS1088 WS1010 WS1080 WS1025 WS1065 TRX1 TRX2;
• Compatible with Radio Shack Radio Scanner: PRO-2018 PRO-197 PRO-650 PRO-163 PRO-405 PRO-528 PRO-668 PRO-94 PRO-404 PRO-95 PRO-62 PRO-83;

User questions & answers

Question:	Does it work on radio shack pro
Answer:	Don’t buy I have yet to get mine programmed there has been no support
Question:	Will this antenna work for a cb radio
Answer:	about 1 watt output

Product description

Specifications:

Gain: 7dBi

Frequency Range: 20MHz - 1300MHz;

Compatible with: Amateur Radio; Car Mobile Radio; Handheld Ham Radio; Two Way Radio; Public Radio Scanner;

Feature: Magnetic Base Mounting

VSWR: < 2.0;

Impedance: 50 ohm;

Direction: Omni-directional;

Cable Length: 3m / 10 feet;

Cable Connector: BNC Male Connector

Net Weight: 160g;

Operating Temperature: -20°С ~ +80°С

Storage Temperature: -30°С ~ +85°С

Package List: 2 x Antenna (As the Picture Shown)



Compatible with Radio Scanner:

Uniden Radio Scanner: SR30C, Bearcat BC125AT, BCD436HP, BC75XLT, BCD325P2, BC355N, BCD996P2, BC365CRS, BCT15X, BCD536HP, BC345CRS, BCD996XT, BC278CLT, BC350A, BC350C, BC355C, BC340CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330;

Whistler Radio Scanner: WS1040 WS1088 WS1010 WS1080 WS1025 WS1065 TRX1 TRX2;

Radio Shack Radio Scanner: PRO-2018 PRO-197 PRO-650 PRO-163 PRO-405 PRO-528 PRO-668 PRO-94 PRO-404 PRO-95 PRO-62 PRO-83;



Compatible with Ham Radio:

Kenwood: TK100, TK200, TK210, TK220, TK300, TK310, TK320;

Icom: IC-V8, IC-V80, IC-V82 , IC-U82 ,IC-W32;

Motorola: HT440, HT90;

Maxon: HR, CP500, CP520, 1015;

Vertex Standard: 734, 834, HR146, HX300, HX320, HX400, CU32, CP/CS 5015, 0420;

Uniden: HH979;

Wilson: HH152, HH154, HH156, HH462 , HH464;

• Frequency Range: 20MHz - 1300MHz; Compatible with: Public Radio Scanner, Ham Radio, Two Way Radio, Walkie Talkie, Mobile Radio; VSWR: < 2.0; Impedance: 50 ohm; Feature: Magnetic Base Mounting; Cable Length: 3m / 10 feet; Antenna Connector: BNC Male Connector; Package List: 2 x Antenna (As the Picture Shown);
• Compatible with Uniden Radio Scanner: SR30C, Bearcat BC125AT, BCD436HP, BC75XLT, BCD325P2, BC355N, BCD996P2, BC365CRS, BCT15X, BCD536HP, BC345CRS, BCD996XT, BC278CLT, BC350A, BC350C, BC355C, BC340CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330;
• Compatible with Whistler Radio Scanner: WS1040 WS1088 WS1010 WS1080 WS1025 WS1065 TRX1 TRX2;
• Compatible with Radio Shack Radio Scanner: PRO-2018 PRO-197 PRO-650 PRO-163 PRO-405 PRO-528 PRO-668 PRO-94 PRO-404 PRO-95 PRO-62 PRO-83;
• Compatible with Ham Radio: Kenwood TK100, TK200, TK210, TK220, TK300, TK310, TK320; Icom: IC-V8, IC-V80, IC-V82, IC-U82 ,IC-W32; Motorola: HT440, HT90; Maxon: HR, CP500, CP520, 1015; Vertex Standard: 734, 834, HR146, HX300, HX320, HX400, CU32, CP/CS 5015, 0420; Uniden: HH979; Wilson: HH152, HH154, HH156, HH462, HH464;

User questions & answers

Question:	will this fit a uV-5R baofeng radio or do I hafta get some kind of adapter
Answer:	You will "hafta" get an SMA female to male BNC connector for this antenna to work with the uv-5r
Question:	can this antenna transmit on Marine VHF band
Answer:	No sir it can not, it is only for receiving your signals. It is not for transmitting, hope this helps.
Question:	Will this antenna work with a uniden bc350c, and a radio shack pro-649 scanner
Answer:	Should work both have BNC connections, same as antenna.
Question:	How strong is the magnet
Answer:	Initially, I didn't think it was strong. But I put out on the roof of my truck, 70 mph on freeway for an hour and it stayed.

Product description

Fiberglass Mast joined to Nickel Plated Brass Ferrule – durable and quality materials to last longer. Includes Heavy Duty Stainless Steel Antenna Spring

• 1000 Watt Rating – gives desired amount of power
• Exclusive “VibraSorb” Anti-breakage Design – improves life of product
• Broad Tuning Range: 26.000 to 29.500 MHz
• Fiberglass Mast joined to Nickel Plated Brass Ferrule – durable and quality materials to last longer
• Includes Heavy Duty Stainless Steel Antenna Spring

User questions & answers

Question:	How does it power? Does it have to be hardwired or use adapter? Thanks
Answer:	Well, I guess it has to be wired in to have power and I am not sure what you mean by "use adapter" I have mine in my diesel dump truck and it is wired to the cigarette lighter power wire and seems to do just fine. Make sure you keep the inline fuse in the wiring though.
Question:	Is the speaker a pa speaker
Answer:	No. The model up from this one has a pa.
Question:	Is this the 4 watt radio or
Answer:	4 watt is the legal threshold for all CB (Citizens Band) radios produced and used in America.
Question:	Does the kit come with decent installation instructions? I'm new to the CB world and haven't put one in before
Answer:	yes very easy to install

Product description

27 MHz (26-28 MHz) CB mobile antenna with magnet base and 13ft RG-58/U cable and PL-259 connector. Steel whip with protective rubber cup. Locking screw for adjusting and tightening the antenna whip.Also equipped with BNC to SO-239 adapter,connector for handheld cb radio to compatible with antenna.



Specifications:

Frequency Range: 26-28MHz (Center Frequency: 27MHz)

Base diameter:70mm

Gain: 3dB

MAX RF Power: 30W

Cable: 13ft RG-58/U

V.S.W.R: 1.2:1

Impedance: 50 Ohm

Length: 0.35m(13.7in)



Package:

1 x CB Antenna for cb handheld radio

1 X BNC to SO-239 adapter



Warning! Observe the maximum height on roads where will drive so that the antenna does not touch any installations or construction.

• 1. CB antenna 14 inch with PL-259 connector, magnet base and 13ft RG-58/U cable.
• 2. Equipped with BNC to SO-239 adapter,connector for handheld cb radio to compatible with antenna when you in the car.
• 3. Easy to install on the roof or trunk of any vehicle and enjoy quality signal reception.
• 4. 13ft RG-58/U cable let you can put the antenna to the best position with good signal.
• 5. Warranty would be valid for 12 months against manufacturing defect.

User questions & answers

Question:	Does it need tuned
Answer:	No, but it does need "to be" tuned.
Question:	Will this work on a realistic trc-30a type
Answer:	Not familiar with that model, but if it has a standard antenna connection port it should match up okay. This little antenna does a nice job on my Chevy van.
Question:	I'm getting a midland 75-822 cb radio soon, and wanted to know how this antenna compares to these: midland-18-2442 and tram 703-hc? (which is better
Answer:	Thanks for the question , as far as interstate talking this is a good low profile antenna make sure u check your SWR so you don't burn your new cb up 1.5 or less , if you are expecting to talk DX or skip you may consider a K40 mag mount been around 20 years . But if just for interstate use and vacation trips this will serve u well . Kind regards and hope this helps .
Question:	is this antenna tunable? don't want to ruin new handheld
Answer:	You might be able to tune it for the lowest SWR for your radio. It does have an allen set screw at the top of the base where the wire antenna goes in. That could possibly give you the ability to change the length somewhat. Just use a good meter and work your way through the adjustments with only short transmit intervals. Good luck!

• Compatible with all handheld CB radios from many brand with a BNC connector, improve quality and range to CB radio reception. The antenna design is soft, flexible and durable, works on all channel within CB radio frequency range of 26MHz to 27 MHz.
• Max Input Power: 30W; Frequency: 27MHz; Antenna Mounting Connector Type: BNC Male Connector; Length: 9.9 inch / 25cm; Weight: 420g;
• Feature: with 5.5cm Diameter Magnetic Base; Cable Type: RG58/U Coaxial Cable; Cable Length: 3m / 10 feet; Cable Connector Type: BNC Male Connector; Accessories: UHF PL-259 Male Connector Adapter;
• Package List: 1 x Antenna, 1 x Magnetic Base, 1 x Connector Adapter (As the Picture Shown);
• Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH30WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C;

User questions & answers

Question:	Do you have to manually tune this antenna
Answer:	I don't know. It was a piece of junk so I sent it back. Do not purchase!!
Question:	Does this antenna require a ground
Answer:	no
Question:	Can you unscrew the antenna and screw it into another base
Answer:	Yes because it come separate when shipped