11 best evans bass drum resonant head

Product description

With accentuated low-end response, the EMAD Resonant is a 7mil Black reso with a fixed internal control ring. It comes with two interchangeable foam rings that install in the 5" offset microphone port and allow the user to manipulate attack, tone, and sustain without the need for internal damping.

• 22" resonant drum head made using a single ply 7.5mil film
• The 4" offset mic port features a plastic sleeve focuses pitch and enhances the attach while providing protection for the port
• The perfect resonant head for use with the EMAD series batter heads
• All Evans drum heads are designed, engineered and manufactured in the USA

User questions & answers

Question:	Will this head work for any brand? Going to be a gift for my bf & all I know about his drums is the measurement and that he uses a double bass pedal
Answer:	Any brand and style will fit, based on the drum diameter. This drum head is for the resonant side (the front of the drum) and the batter head is on the side that the pedals are on. There is a difference between resonant and batter heads. I can recommend the Evans EMAD heads for both resonant and batter sides of the drum.
Question:	Some reviews here say the head pictured is not what they received, even though it sounds great. Can someone confirm that the head has a mic hole
Answer:	Yes, mine did because this is what I needed. It is better than most because the mic hole is actually a protected hole; not just a cut hole with raw edges. I was very pleased. One wonders with other sizes, however. I bought for my 20" studio kick.
Question:	What I you cut a large hole in the center of a res head? Does it hurt or help or no difference
Answer:	The hole is only really designed for using a microphone. Before cutting the whole, position the microphone in different locations to find the best response area and then cut your hole there. We recommend this to cute the hole itself. https://www.amazon.com/Gibraltar-SC-GPHCUT-Bass-Drum-Cutter/dp/B00BAYPO9W Thanks for your interest. Y2PLAY Stores 1-800-695-4808
Question:	Can you fit a kickport in this head
Answer:	The Kickports come with a template to cut the hole as needed to fit the Kickport. You will need to cut the hole to the proper size with any head. Thank you for your interest! Y2PLAY Stores - 800-695-4808.

Product features

Evans Resonant EMAD

Evans Resonant EMAD series (REMAD) features 7.5 mil of single ply black film. The unparalleled industry standard EMAD damping system combined with an internal fixed ring provides controlled overtones. The 4" offset mic port features a plastic sleeve that focuses pitch and enhances attack while providing protection for the port. The Resonant EMAD head is the ideal sonic partner for the EMAD bass batter head, and lends a studio ready focus and punch to any bass drum. Equipped with Evans Level 360 technology on the collar of the head, the EMAD head makes balanced contact around the perimeter of the drum and allows for improved resonance and ease of tuning.

Balanced Contact

For ease of tuning and enhanced quality of sound.

Greater Tonal Range

Wider tuning options result in higher levels of responsiveness and resonance, giving you the confidence to tune your drums high or low.

Roll-Over Hoop

Provides strength and stability where the film meets the hoop, for greater durability without diminishing performance.

Steeper Collar

Extends the level plane of the drum head to ensure balanced contact with the critical bearing edge of the drum shell.

Product description

A 7mil resonant head with an offset 5" microphone port and an internal overtone control ring, the EQ3 delivers a warm and punchy sound with a controlled, short decay that's ideal for both live and studio applications. The coated versions deliver additional warmth, focus, and depth.

From the Manufacturer

Evans 22" EQ3 single-ply coated white resonant bass head offers a warm and punchy sound with a controlled, short decay that's ideal for both live and studio applications.

Evans EQ3 resonant series features an offset 5" microphone port in a single ply of 7.5mil film. The series is a very popular choice for both players and engineers. Available in multiple finishes.

For over 40 years, Evans has been a pioneer of drum head manufacturing and design. Known for innovative designs such as EMAD, EC2S, and the Hydraulic series, Evans drum heads are made in the USA in a state of the art manufacturing facility. Acquired in 1996 by D’Addario and Company, the global leader in musical instrument accessories, the Evans brand is synonymous with quality and consistency.

• 22" resonant drum head with a single ply of 6.5mil film
• A fixed, internal overtone control ring is made to be microphone friendly, from the studio to arena
• The 5" offset mic port features a plastic sleeve focuses pitch and enhances the attach while providing protection for the port
• Available in a frosted, onyx, smooth white and coated white version
• All Evans drum heads are designed, engineered and manufactured in the USA

User questions & answers

Question:	In the black version the hole is 4 inches for 20s, it’s 5 inches in white? I want 4 inch hole
Answer:	Don't have the exact dimensions, but mine is about 7-1/2" to 8" tall, 6-7" wide, may 1" wide at the base.
Question:	what is the difference between the coated and the smooth? thanks in advance
Answer:	It's about 6" in diameter.
Question:	Is this a glossy finish
Answer:	No
Question:	Does the 26" have the port hole too
Answer:	Dear Customer Our mallet is made of solid wood so the sound will be loud and clear. For more help please feel free to contact us. Hope you enjoy:) Best regards Eastar Customer Service Team

Product description

Whether you play rock, blues, country or metal, the Evans EMAD System Pack is for you. Named for the externally mounted adjustable damping (EMAD), the versatile system caters to all bass drum tones by allowing each player to control the attack and focus of the drum head by choosing one of two removable foam damping rings. Choosing the thinner foam ring allows for punch and focus without sacrificing resonance, while choosing the wider foam ring maximizes the low end and attack of any bass drum. A consumer favorite, the EMAD system value pack is an economical way to get both a front and back drumhead. It includes one 22” EMAD batter bass drumhead featuring a single ply of 10mil film providing an ideal balance of punch, power and low-end. Plus, one 22” REMAD resonant drumhead featuring an offset 4" microphone port in a single ply of 10mil film. A black, noise-free plastic sleeve on the resonant drumhead holds a foam dampening ring around the edge of the microphone port which controls overtones, enhancing pitch focus and attack. Enhanced with revolutionary Level 360 technology, the bass drumheads are easier to tune, with a wider tonal range than ever before. Applying the new Level 360 collar shape to the EMAD bass drumheads provides heads that are easier to tune and a wider tonal range for a sound that is studio ready. For over 60 years, Evans Drumheads has been a pioneer in drum head manufacturing and design. Now part of D’Addario & Company, Inc., Evans products are proudly made in a state-of-the-art manufacturing facility in the USA to the most stringent quality controls in the industry. The D’Addario family’s heart, soul and love for making music is put into every drum and accessory we create, and we never stop inspiring performance.

• EMAD SYSTEM– The Evans batter bass drumhead and resonant drumhead have an externally mounted adjustable damping system (EMAD) that allows each player to control the attack and focus of the drum head by choosing one of two removable foam damping rings.
• EMAD BATTER BASS - The Evans EMAD system value pack includes one 22” EMAD batter bass drumhead featuring a single ply of 10mil film providing an ideal balance of punch, power and low-end.
• REMAD RESONANT BASS – The set also includes 1, 22” REMAD resonant drumhead featuring an offset 4" microphone port in a single ply of 10mil film .
• LEVEL 360 TECHNOLOGY – A Level 360 collar allows the Evans bass drumheads to seat properly and in turn provides heads that are easier to tune and a wider tonal range for a sound that is studio ready.
• MADE IN THE USA - For over 60 years, Evans has been a pioneer in drum head manufacturing and design. Regarded for high quality and consistency all Evans drumheads are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.

User questions & answers

Question:	what is the size of the hole
Answer:	I'm not sure but I can just slide my beta sm 91 in there. Shure mic
Question:	Is evans emad system pack, 22 inch comes in 2 pcs (front & back
Answer:	Yes
Question:	Does it come with the hardware needed to attach to the base drum
Answer:	It comes with a batter head and a ported front head but hardware. You would use the lugs and claws that are on your bass drum if you have them.
Question:	I have a tension watch for my drum heads what should I tune this head to to play heavy metal
Answer:	Loosen all the lugs first , then finger tighten all the lugs , push down on the rim with both hands and body weight in 4 different points , then finger tighten the lugs again . Once that is done 1/4 turn all the lugs than 1/4 turn all the lugs again . That what I do . If your personal preference is tighter than that use 1/4 turns only so you don't have the rim and the head seat uneven . If their is to much boom tighten the front head 1/4 turns and try it until the boom is gone or as close to gone as you can get it . I also have a pillow in it to soak up the sound . Hope this helps you .

Product features

Evans EMAD System Pack, 22” (2pc) – Includes Batter Bass Drumhead and Resonant Drumhead

Adjust attack and focus easier. Balance your power, punch, and low end. The EMAD (Externally Mounted Adjustable Damping) system from Evans is for drummers.

Product description

A 7mil single-ply with no rings or vents, the Resonant provides a wide-open tone with maximum sustain. Tuned low, it's wide open and cavernous…reminisant of vintage arena rock sounds.

From the Manufacturer

Evans 22" single-ply resonant black bass head offers a wide-open and deeply resonant tone due to the lack of control rings or venting.

Evans Resonant Black series features a single ply of 7.5mil film without overtone control rings or dry vents, allowing maximum resonance and frequency response.

For over 40 years, Evans has been a pioneer of drum head manufacturing and design. Known for innovative designs such as EMAD, EC2S, and the Hydraulic series, Evans drum heads are made in the USA in a state of the art manufacturing facility. Acquired in 1996 by D’Addario and Company, the global leader in musical instrument accessories, the Evans brand is synonymous with quality and consistency.

• 22" resonant drum head with a single ply of 7.5mil film
• Single ply of film without control rings or vents in order to maximize resonance
• Provides optimal resonance at higher tunings
• Ideal for jazz and bop
• All Evans drum heads are designed, engineered and manufactured in the USA

User questions & answers

Question:	This says drum head, what else is required, where is the actual drum or is this complete
Answer:	My "14 inch gong" is actually 13-1/2 inches wide (diameter). The base is 11-3/4" and the round frame is 18" across (diameter).
Question:	Is it the whole bass drum
Answer:	no, the back is plain, not no design

Product description

One ply of 7.5 mil black film with a micro-clear matte coating, an internal control ring, and a 5" offset mic port give the Onyx Resonant a short sustain with a dark sound.

From the Manufacturer

Evans Onyx 22" black single-ply bass head with an internal overtone control ring delivers a warm and punchy sound with a controlled, short decay that's ideal for both live and studio application. The film contains a frost matte coating offering a short sustain with a dark sound.

Evans EQ3 series features a 7mil of single-ply film and is a popular choice for both players and engineers. With an internal overtone control ring, the EQ3 delivers a warm and punchy sound with a controlled, short decay that's ideal for both live and studio application. The 5" offset mic port features a plastic sleeve, focuses pitch and enhances the attach while providing protection for the port.

For over 40 years, Evans has been a pioneer of drum head manufacturing and design. Known for innovative designs such as EMAD, EC2S, and the Hydraulic series, Evans drum heads are made in the USA in a state of the art manufacturing facility. Acquired in 1996 by D’Addario and Company, the global leader in musical instrument accessories, the Evans brand is synonymous with quality and consistency.

• 22" resonant drum head made using a single ply of 7mil film coated with a frost matte coating
• A fixed, internal overtone control ring is made for every microphone situation, from the studio to arena
• The 5" offset mic port features a plastic sleeve focuses pitch and enhances the attach while providing protection for the port
• Available in a frosted, onyx, smooth white and coated white version
• All Evans drum heads are designed, engineered and manufactured in the USA

User questions & answers

Question:	Would this head go well with the evans eq4 batter head? drums are played at a church and typically play rock style music
Answer:	Slightly but depends on how hard and big room is This is great one you will love it I do

Product description

Warm with focus, depth, and ample sustain, the EQ1 resonant head combines a 7mil solid front, internal overtone control ring, and dry vents to produce a round and balanced sound. Tuned low, it produces an absolutely cavernous rumble that is microphone friendly, but with an earthy and organic abience.

From the Manufacturer

Evans 22" EQ1 single-ply black resonant bass head offers focus, depth and ample sustain. The internal overtone ring and dry vents focus the resonance and control overtones.

Evans EQ1 resonant series features a single ply of film with dry-vents to allow air to escape and an internal overtone control ring to focus the resonant tone of any bass drum.

For over 40 years, Evans has been a pioneer of drum head manufacturing and design. Known for innovative designs such as EMAD, EC2S, and the Hydraulic series, Evans drum heads are made in the USA in a state of the art manufacturing facility. Acquired in 1996 by D’Addario and Company, the global leader in musical instrument accessories, the Evans brand is synonymous with quality and consistency.

• 22" drum head with single ply of 7.5mil film and a fixed internal overtone control ring
• Dry vents allow air to escape and reduce overtones
• Wide tuning range
• Also available in a coated version
• All Evans drum heads are designed, engineered and manufactured in the USA

Product description

The EC Resonant controls and correct tuning inconsistencies while offering a more centered pitch, increased resonance, broad dynamic range, and enhanced projection. Made with a 10mil ultra-clear film that provides a mid-range frequency bump, the EC Resonant highlights the natural sound of the drum.

From the Manufacturer

• 16" resonant drum head made using a single ply of 10mil film
• A single ply offers an open and expressive sound
• Sound Shaping Technology insures optimized performance for each individually sized drum head
• All Evans drum heads are designed, engineered and manufactured in the USA

User questions & answers

Question:	Would anyone recommend pairing this wish a Remo Ambassador Coated batter head
Answer:	Hi Janis! The gong itself is 10" in diameter, so you could easily fit it in a carry on bag. The dimensions of the gong in the box are 13" x 10" x 3", which should also fit in a carry on bag. I hope this helps!
Question:	is this a batter head
Answer:	Does this turn in the wind or hang straight? I want to put on side of camper and gong can't be too big. If hangs straight, it'll work, but turning gong will hit side of camper.
Question:	can the remo suede emperor on top sound good with some evans ec reso on the bottom of a gretsch maple kit
Answer:	All gold ones
Question:	Would anyone recommend paring this to the evans g2 clear head
Answer:	Gong and frame together weighs about 9-1/4 pounds.

Product description

Calftone drumheads are a synthetic alternative to traditional calfskin. These heads embody the calfskin look and sound but with the consistency, fit, and tuning range made standard with Level 360 Technology. Calftone is made using a blend of unique materials to produce warm, full, and rich tones. These heads bring out the best of a vintage kit and evoke a classic appearance and sound from modern drums.

• 18" drum head for resonant or batter use
• Calftone is a synthetic alternative that embodies the look and sound of traditional calfskin
• Made using a blend of unique materials to produce warm, full, and rich tones
• Exclusive Level 360 Technology collar design ensures proper contact between drum head and drum shell
• Bring out the best of a vintage kit and evoke a classic appearance and sound from modern drum

User questions & answers

Question:	Is this head have the usual 12 mil Mylar thickness
Answer:	No, it comes just as the picture shows. A gong and a rope cord.
Question:	Can I use this as a resonance head
Answer:	I had two break after a week. I returned both and bought a better brand of windchimes and haven't looked back. Made in China junk.
Question:	Can I use this specific drum head as a resonance head
Answer:	Hi Kevin-Yes, I just checked and it can easily be held by the string and played. If you do that, we'd love to see it! Take a picture or video and post it to the Woodstock Chimes facebook page! www.facebook.com/woodstockchimes

Product description

Evans smooth white EQ3 resonant no-port series features a single ply of 7.5mil film with a 10mil internal overtone control ring. The series delivers a warm and punchy sound with a controlled, short decay popular for both players and engineers. This version features a bass hoop to accommodate standard bass drum counter hoops. For over 40 years, Evans has been a pioneer of drum head manufacturing and design. Known for innovative designs such as EMAD, EC2S, and the Hydraulic series, Evans drum heads are made in the USA in a state of the art manufacturing facility. Acquired in 1996 by D'Addario and Company, the global leader in musical instrument accessories, the Evans brand is synonymous with quality and consistency.

• 16-inch resonant drum head with a single ply of 7.5mil film
• A fixed, internal overtone control ring is made to be microphone friendly, from the studio to arena
• No mic port
• Bass hoop for standard bass drum counter hoops.
• All Evans drum heads are designed, engineered and manufactured in the USA

User questions & answers

Question:	I play in a country band would it be good for country
Answer:	That's going to be a pretty tough question to find an answer to. Their website is pretty vague, and, from what I can tell, their cymbals and gongs are made, at least in part, from recycled cymbals.
Question:	Will this head work with a standard hoop on a floor tom converted to a bass
Answer:	Anything touching a vibrating cymbal will decrease the attack and duration of the cymbal. However, I assume you are limiting the suppressants to "small" stickers. I strongly doubt you will be able to detect a degradation of sound under those conditions. Let your ear be your judge. Try it! Stickers can be removed. It is highly unlikely that a dramatic roll-off will occur.
Question:	are the black ones matte or glossy
Answer:	Yes. Rope is already on the Gong, as pictured. The mallet is included and of excellent quality.

Product description

A classic sound, short in sustain. Tension it tight for a real thump or loose and slappy. Two plies sandwich a thin film of oil that supresses unwanted overtones.

From the Manufacturer

Evans 22" black Hydraulic two-ply bass head features a thin film of oil between the plies that suppresses unwanted overtones. A classic sound, short in sustain. Tension it tight for a real thump or loose for a more slappy sound.

Evans Hydraulic series features two plies of thin film offering maximum durability, a fat, deep and short sound pioneered by early 70's rock and roll. Hydraulics are famously easy to tune, making them a perfect fix for troublesome drums and players with little tuning experience. Available in 3 colors: glass, black and blue.

For over 40 years, Evans has been a pioneer of drum head manufacturing and design. Known for innovative designs such as EMAD, EC2S, and the Hydraulic series, Evans drum heads are made in the USA in a state of the art manufacturing facility. Acquired in 1996 by D’Addario and Company, the global leader in musical instrument accessories, the Evans brand is synonymous with quality and consistency.

• 22" drum head with a thin layer of oil between two plies of black film to suppress unwanted overtones
• Two plies offer consistency and durability for longer playing time
• A fat, deep and short sound pioneered by early 70's rock and roll
• Also available in clear (also called glass) and blue versions
• The only oil-filled drum head on the market

User questions & answers

Question:	How will I know if it will fit
Answer:	5A
Question:	Where Is It Made
Answer:	5A
Question:	does this come with the pedal
Answer:	Yes they will. I play with ebony heads so it not really noticeable on the heads but the cymbals and rims will show some.
Question:	How does this compare to emad with the foam rings? if i'm used to that will this sound ringy or have a lot of sustain
Answer:	These sticks are lightweight overall, and I do not notice any balance issues. I use them for practice, but switch to heavier sticks for recording.

Product description

Whether you play rock, blues, country or metal, the Evans EMAD2 Clear Bass Drum Head is a true working drummer’s choice. Named for the externally mounted adjustable damping, the versatile system caters to all bass drum tones by allowing each player to control the attack and focus of the drum head by choosing one of two removable foam damping rings. Choosing the thinner foam ring allows for punch and focus without sacrificing resonance, while choosing the wider foam ring maximizes the low end and attack of any bass drum. The 22” drum head has an outer ply of 7mil and an inner ply of 10mil film for added durability. Enhanced with revolutionary Level 360 technology, the clear bass drum head is easier to tune, with a wider tonal range than ever before. Applying the new Level 360 collar shape to the EMAD2 bass drum head allows it to seat itself properly and in turn provides a head that is easy to tune and a sound that is studio ready. Evans EMAD2 clear bass drum heads are available in sizes 18” to 26” with multiple thickness and coating options. For over 60 years, Evans Drumheads has been a pioneer in drum head manufacturing and design. Now part of D’Addario & Company, Inc., Evans products are proudly made in a state-of-the-art manufacturing facility in the USA to the most stringent quality controls in the industry. The D’Addario family’s heart, soul and love for making music is put into every drum and accessory we create, and we never stop inspiring performance.

• EMAD SYSTEM– The Evans Clear Bass Drum Head has an externally mounted adjustable damping system to control the attack and focus of the drum head by choosing one of two removable foam rings. The 22” drum head has an outer ply of 7mil and an inner ply of 10mil film for added durability.
• LEVEL 360 TECHNOLOGY – A Level 360 collar allows the clear bass drum head to seat itself properly and in turn provides a head that is easier to tune and a wider tonal range for a sound that is studio ready.
• AVAILABLE IN 5 SIZES – Evans EMAD2 clear bass drum heads are available in sizes 18” to 26” with multiple thickness and coating options.
• FOR ALL MUSIC GENRES – The EMAD2 bass drum head is extremely versatile for all music genres. A true working drummer’s choice, the adjustable damping caters to all bass drum tones.
• MADE IN THE USA - For over 60 years, Evans has been a pioneer in drum head manufacturing and design. Regarded for high quality and consistency all Evans drumheads are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.

User questions & answers

Question:	I never received my bass drum heads. Who do I contact to resolve this
Answer:	Try contacting amazon services if not contact the company and see what they can do.
Question:	Is this better than the aquariun super kick
Answer:	in my opinion of selling bass drum heads for 41 years yes
Question:	Does this product work
Answer:	Yes, it works great!
Question:	It doesn't fit my 22" bass drum by a couple of millimeters. Is there a special way to install it
Answer:	Are you saying that the drum shell is too small or too large in diameter?I have 2 of the Evans heads,(24 in acrylic Bass, and a 22 in wood Tama) and they both fit exactly correct.When I change drum heads I always coat the shell bearing edge with candle wax, or a paraffin block.It seems to help to seat the head smoothly when tuning.Good luckRock On.

Product features

PERFECT COMBINATION OF POWER, PUNCH & CONTROL

The unparalleled industry standard Externally Mounted Adjustable Damping (EMAD) system allows the player to adjust attack and focus.

FEATURES:

• Made using two plies of film--an outer ply of 7mil and an inner ply of 10mil film
• Externally Mounted Adjustable Damping system allows the player to adjust, attack, and focus
• Very versatile head for all music genres; a true working drummer's choice
• All Evans drumheads are designed, engineered, and manufactured in the USA