13 best ipow iphone 6 plus

• 【Upgraded More Stable Version Since Oct. 28,2018】Added 4 Sticky Gel Footprints based on old anti-slip mat design,this holder will be more stable. Please tear off the protect films of the sticky gel footprints to use.
• 【Hassle-free to Move and Adjust】Put it quickly in front of car steering wheel,on car dash/console/seat/home/office, place your phone in then adjust it in all directions to the best location in your eye level.
• 【Holds Different Phones】Two pairs of rubber holders compatible with phones' thickness within 14mm, the slide ways for the rubber "legs" are inserted with sheet metals to offer a strong suppport so your phones stay more snugly.
• 【Phones's Title Angle Adjustable】Use 2 C-shaped clips on the mounting holders, move them up and down to adjust the tilt angle of your phone.
• 【Convennient Simple Design】No long arm, magnets, suction cups, clamps, folds flat for easy storage and lightweight to carry and travel.

User questions & answers

Question:	Can your product accommodate a 15mm thick case
Answer:	YES. The grabber or clip opens very wide. Your screen is smaller then mine so will fit no problem. Good product.
Question:	Will it hold a thick tom-tom GPS
Answer:	It fits a note 4 with an extended battery case so yes it'll fit any phone size
Question:	Can you adjust the angle where your device sits? My dashboard is a little high and I need it to be almost straight angle towards me
Answer:	2 3/4" from outside to outside of arm. 1 1/2" from inside to inside of arm.
Question:	How does it stay in place on the dashboard? Any sticky that might ruin a dashboard
Answer:	this is windshield mount but they do have the ones that mount in cd slots and it does not effect the cd while playing.

Product features

IPOW Cell Phone Holder for Car Dashboard

Upgraded - We pay close attention to users’ review of our products and improve products based on your feedback. In October 2018, we added 4 Sticky Gel Footprints based on old anti-slip mat design to ensure that the holder is more stable while driving.

Convenient Simple Design - No long arm, no magnets, no suction cups, no clamps, folds flat for easy storage and lightweight to carry and travel.

More uses - Not only a car phone mount, but also a desk phone stand. Can be used as a desk phone stand to watch movies, video calls, read messages, visit website, etc.

Package Includes

1 * Silicone mat

4 * Rubber parts with 2 sizes

2 * Tiny C-shaped clips

Adjustable Width

Please use the rubber "legs” size properly to fit your phone and move them to fit your phone length.

Adjustable Viewing Angle

Move the C-shaped clips down to make your phone to fit the legs more snugly and adjust phone angle close to 90 degree.

• 【One Button System】Spring-loaded design holder free from fussy screw and nut operation. Insert the mount, lock the lever, and installation finished
• 【Heat-resistant】Rubber cushions used are heat-resistant to suit for areas of hot temperatures. Six additional pads(since Dec.08,2018)of different thickness to meet various CD slot sizes
• 【Adjustable Joints】Two ball joints offer a full 360 degree rotation for your phone and tilts for multiple viewing angles of your phone's screen
• 【Music Available】You can play music through the CD player simultaneously with the holder installed
• 【Smooth Surface】Rubber oil surface treatment makes the mount feel softly and smoothly. Offer you better using experience

User questions & answers

Question:	Will this harm or scratch the cd player in any way
Answer:	I would not buy this item. The adjustable pads after a couple of months no longer stay on the holder. Mine did not get stuck in the cd player but now my cd player does not work after using this since July 2018. I loaded a cd and it would not play, then would not eject. I finally got it to eject after many, many tries. My cd player worked perfectly before using this holder. Stay far away!
Question:	Many people keep saying that the phone holder is not able to hole the phone ? It start to drop down after a bump or a weeks of use
Answer:	I have an iPhone 5 and my wife has an iPhone 6 plus and the device can hold the phones, they have never fallen off the phone holder. The problem lies in the arm the moves up and down to position the phone. After about two weeks the arms grooves that hold the phone in different positions wore out.
Question:	Can I use CD player at same time with this mount
Answer:	I don't see why not as the amount does not go that far into the player. The only problem would be if you try to eject the CD with the mount in. The CD will not come out then. Otherwise I have not had a problem with this and would consider ordering another one if I had another vehicle to use it in. You also have to make sure that while the mount is in that you are not moving it around that much as you put your phone in. I would think that too much movement of it might just cracked the top frame of the CD player. You can always pop the mount out every time you want to put your phone in and then put it back in. I absolutely love this product though.
Question:	Will it fit a bmw stereo cd
Answer:	Yes. I use one in my 05 X3 with the stock stereo "business CD".

Product features

IPOW One Button Installation CD Slot Phone Holder

This CD slot holder is a good idea to hold phone for navigation while driving,if you don't want dashboard/window phone mounts.



Why?



1.The vent holder will block car vent and the cold/hot/moist air will blow at phone.



2.It is easier to use than other CD mounts,no need to assemble and quicker installation.



--No Need to Assemble.This car cd phone mount is a one-piece design,you don't need to assemble the mount parts like other design.



--Quicker Installation.Unlock it by only one button, slide the dock into the CD slot, and lock it again.No screws or knobs need to be adjusted.

Extendable Clamp & One Button Lock

Clamp

*Extendable Width--2.16"-3.5"

*Tight spring & anti-slippery edges---protect your phone from dropping.

*Fits popular phones--iPhone X/8/8P/7/7P/6s/6/5S/SE,Samsung galaxy S8/S8 P/s7/s7 edge/note 8,lg g6/5 stlyo 3/2,v20/30,Nexus 6/6P/5,HTC,Huawei,etc.

Lock

*1 second lock in---helps the dock grab the CD slot.

*1 second remove---easy to transfer the mount from a vehicle to a vehicle.

Heat-resitant Base/Dock

*Heat-resitant---won't leave resuides.

*No harm to CD player---smooth rubber surface.

*Allows to play CD/radio---while mounting a phone.

*Fits standard car CD slot---4.8" wide.

*Use for different vehicles---bonus 6 adapters

Adjustable Lever

*2 adjustable joints---you can rotate and tilt it for perfect view.

*Flip it upside down---if you need.

• One Button Install System, Free From Fussy Screw Operation - It only needs seconds to install the holder to the car, unlock the switch on the base, insert the holder to the CD slot, lock the switch. Simply you will get a holder firmly stays in the CD slot.
• One Button Auto-Release, All-Around Phone Protection - Merely press the release button, the two side arms will open automatically. Pull out the hidden support feet and squeeze the arms to hold the phone. Along with the shock adsorbing sponge cushions, your phone will be hugged and protect carefully like a baby in the car seat.
• CD Slot Phone Mount, No Interference to Music Playing - Transform the car CD slot into a much more convenient place to hold your phone, no more air vent blocking and driving view influence. Enjoy the music, enjoy the safety on road.
• 360°Rotation Adjustable Angle, Extra Up and Down Lever - With the special ball joint design, you will enjoy a broad 360 rotation adjustable angle. Even more, our holder lever can be adjusted up and down for 90 degree, thus, you can easily find your perfect viewing angle.
• Broad CD Slot and Phone Compatibility - We prepared 6 rubber pads with different depth in the package for you to choose according to the requirement of your CD slot. The holder fits phones with width from 1.8" to 4.1" thickness up to 0.6".

User questions & answers

Question:	Will it fit after market cd player
Answer:	At first I recommended this product, but over a period of time, it worked loose from the CD player a couple of times, even after I tried using different configurations of their spacers. Also, I found it to be unstable overall. I no longer use it or recommend it.
Question:	Does it hold phones with pop socket
Answer:	No you will have to take that off
Question:	Does this fit my samsung galaxy 9plus? also can u adjust this lower or remains at just eye level
Answer:	It has about an inch space around before closing on the iPhone max. It will not tilt downwards.
Question:	What is the warramty
Answer:	Do you expect a warranty on a $12 item? The item is good quality and works as advertised.

Product features

IPOW Car CD Slot Phone Holder

Do you find yourself needing your smartphone to navigate through the urban jungle? Are you tired of all car mounts not fitting your dashboard? Do you remember the last time you actually used your car’s CD player for music? The answer to all these questions can be found with IPOW CD SLOT MOUNT.

It turns your CD slot into a place to hold cell phone without any adhesives, gel pads or magnets. The 360-degree rotating head allows you to effortlessly angle your screen for optimal, hands free driving!

• No Glue Suction Cup Windshield Holder, Can Last in Hot Summer. Note: It can't be used to car dashboard. The non-sticky suction cup can suck to windshield/glass sturdily as sticky one does. What’s more, it will work in hot weather, because its suction will last in high temperature while the sticky suction cup may lost stickiness and stop working.
• Compatible with Large Phones in Thick/Irregular Protective Case. The clamp can hold phones up to 3.5" IN WIDTH and is deep enough to fits almost all phone case includes wallet phone case, phone case with attached ring, Loopy case.
• Secure Holder. The four claws of the X-shaped Clamp grip your phone firmly like your hands do, and they have anti-slip pad and strong spring, so your phone won’t fall out from the clamp no matter it is mounted vertically or horizontally.
• No distraction while driving. The arm is long and super flexible , around 7.6" from the ball joint to suction cup. Plus the 360 degree rotation ball joint you can adjust the arm to hold your phone on eye level for easy navigation.
• Happy Purchase Ensured, if you are not satisfied with it, just contact our 24-hours customer service to enjoy a good solution until you are satisfied. Click 'add to cart' NOW!

User questions & answers

Question:	Entonces solo puede utilizarce una vez, no puede desmontarse y utilizarse en otro vehículo
Answer:	chisel bit works with a jack hammer with 1-1/8" hex shank.
Question:	Will this item fit a iphone xs max with an otter box defender series case
Answer:	should be able to check shaft size and the place on the tool too see if it's the same.
Question:	How well does it fare in the summer heat
Answer:	Yes. As long as the jack hammer is reasonable this will do a fine job.
Question:	Is the mechanism clamp for the suction cup supposed to be semi loose when locking it
Answer:	Joe D I am a landscaper and bought for a job that I was doing to remove a couple Palm Trees. Works Great!

• Triple reinforcement on dashboard,one-hand operation spring loaded clamp and bite your phone tightly.
• Car dash sticky holder fits mobile devices width within 4.5",item size 5.4"L x 5.4"W.
• Reusable and washable anti-slip gel pad,with a circle of adhesive PU film(won't melt) in the bottom middle.
• Mount smartphones horizontally in 2 different viewing angles,sunshine resistance.
• The upper and lower ends of clamping are soft textured rubber mats,mounting devices gently and securely.

User questions & answers

Question:	Hi, will this fit a LG V20 phone
Answer:	I have an Apple iPhone 7 Plus and it fits just fine. I believe your phone is about the same size.
Question:	Will it work with iPhone 6s Plus
Answer:	Very nicely
Question:	Will this fit a Galaxy Note
Answer:	I do not know size of a Note 5 so I can not say yes or no!
Question:	Will this work on a non flat surface like the nissan sentra 2002 or kia picanto 2017 dash
Answer:	Yes, it was fine for me. I used it on a Nissan Sentra rental car but 2017 model. It stayed in place even without the sticky end exposed.

Product features

IPOW Universal Multi-functional Sticky NonSlip Dashboard Car Phone Mount

Features:

Bonus a wiping cloth to clean your phone.

Mount your phones at home and office see videos,answer phone calls,taks pictures or shoot videos.

Sunshine-resitance.Mounts phone horizontally with 2 different viewing angles (not compatible vertically).

Easy installation,just get the mount out of package and adhere it to use.

Sleek design avoids scratching phone.Easily insert and remove phone with one hand.



Note:Gel pad sticks is easy to clean. Do not leave residue on the dashboard.

One-Hand Operation

Put your phone on/off with one hand easily,clamp is easy to open and brace your phone firmly with the Triple Reinforcement design.

Product description

Ipow bike phone mount has been thoroughly tested and checked by our professional QC team before shipment. And it has 12 month warranty & 100% satisfaction guarantee, please feel free to shop.

• 2 silicone butterfly bands can be used interchangeably, grip and protect your phone in all directions with phone mount and to prevent you device fall
• Universal fit: Compatible with most devices, 2.3-3.5" wide clamp can hold iPhone 12/11 Pro Max/X/XR/XS MAX/8/7 Plus, Samsung Galaxy S10/S10e/S9, Nexus, HTC, LG, BlackBerry, etc.
• Soft red rubber lines for clamp can reduce vibration as well as avoid phone surface scratches
• 3 setting and rubber can be at least 5 different installation diameter, the max diameter is 1.33 inch
• 360 Degree Rotation with Easy Installation and long time after sale service. For any issue, you are warmly welcomed to contact us by e-mail. Our professional customer service is always there for your until you are satisfied with the solution.

User questions & answers

Question:	can i use this on a 50 cc dirt bike i have a zte avid plus
Answer:	Am not sure. It fits bicycle definitely but you are talking about bikes. It night fit but the problem would be possibilities of moving out of position since even if my bicycle gets more jerks i need to adjust a bit to bring the mount back to position. Although it does not happen frequently but yeah it does. With dirt bike am assuming for the jerks it might not be the best buy for u.
Question:	Is there a way to tighten down the ball joint to prevent it from moving? Can't seem to get it tight enough
Answer:	My husband and I both got one, and it hasn't moved during a ride yet, so maybe your's was defective and a little more loose than it should be? Although, we haven't tried going offroad more than just some in the grass and a little gravel, so it's possible in rougher terrain that maybe it would get knocked around. On the side that attaches to the bike, you have to unscrew the black ring first and put that over the ball joint, THEN you pop the ball joint into the socket, then you tighten the ring back on. If you're doing that and it's still having issues, then I'm not sure. :( Sorry.
Question:	Does this work for the samsung galexy J3 and can i do wheelies with it
Answer:	Your phone will fit. Not sure if you can do wheelies with it, can you do wheelies now? Mine is very secure.
Question:	Anyone use this for a motorcycle
Answer:	I am using it on my motorcycle. It seems sturdy enough. I don't see any vibration. I am riding a large touring bike which is a smoother ride.

• 【Broad Compatibility】Fits almost all phones even with phone case like iPhone XR, XS Max, 8+, X, 8, 7, 6s, 6, Galaxy S10, S10+, S10e,S9 S8 S7, S6 S5 Note 9 8, LG G6, HTC and so on.
• 【Easier to Open X-Shaped Double Clamp】Easy open, don't need too much strength. Can extend to 3.54 inches at maximum and holds your phone snugly as hands do.
• 【Adjustable Durable Arm】With thicker and softer embedded aluminum alloy rod which is easier to blend and won't lose its position when driving.
• 【Stronger Suction Cup】The vacuum suction cup uses stronger better spring lock inside which won't break. It will stick tighter to the windshield or dashboard.
• 【Upgraded Longer Arm】The arm is 7.6" long while old version is 7.2". Helps you get the best viewing angle of your phone.

User questions & answers

Question:	Will this hold an iPhone
Answer:	Si puedes montar y desmontar. Mi esposo siempre lo esta cambiando de posición segun le parece.
Question:	How wide are the little clamps, and how far apart are they? i have a google nexus 5x and i need to see the clamps will hit the buttons
Answer:	I think it will. I have an iPhone with a case and there is extra stretching room in the clip. I have been pleased with it and my daughters phone is bigger than mine and it works perfectly.
Question:	How long is the arm
Answer:	I've had it for over a year (FL summer) and it hasn't once fallen off my windshield. I do keep it pretty low on the left corner of my dash using the arm as a support, but it's never fallen off even when going over large bumps or potholes.
Question:	Is the flexible part pretty stiff? I want to use this in an off road vehicle. Will it bounce around or stay put
Answer:	Once locked, no. Loose only when unlocked

• Powerful Magnetic Force - Hands-free and super stable. 4 sticky iron plates and premium magnetic head allow Our car phone mount holds any phones steadily even on rough roads. Silicone magnetic head pad and 4 transparent protect films avoid any scratches for your phone or phone case. No switch, no clamp, no button, no complicated operation, most safe car phone mount for driving.
• Maximum Angle Adjusting - Our magnet car phone holder can be adjusted by 3 knots, 360-degree rotation joint ball, 180-degree rotation clamp and 140-degree rotation arm. Good to use in landscape or portrait mode for convenient navigating, calling and music in the vehicle. Easily find a perfect bend down angle. No view blocking, no distraction, no danger.
• Versatile Reusable Phone Mount - Ultra-strong vacuum suction cup features a layer of sticky gel and a locking lever, thus our cell phone holder can be attached on dashboard, windshield and desk firmly. Our suction cup is washable, reusable by rinsing it under warm water and let it dry. We also designed an uninstall tab for easy moving. Easy to install/uninstall, simple your life.
• More Features and Broad Compatibility - It also features durable high quality, heat-resistant PC, ABS materials, trendy outlook, box package and unrivaled compatibility. Magnet head makes it fits all smarts phones with/without cases, no more worry of phone sizes. Tips, uneven case is not compatible. Direct attachment between iron plate and magnet head offers stronger attraction. (iPhone 11/11 Pro Max / XS / XR / 8 Plus /7 / 6s /5s /4, Samsung Galaxy Note10+ / S9 / S8+ / S7 Edge / S6 / S5 etc.)
• 1 Year Warranty Hassle Free After Sale Service - Our phone mount is tested in real life for thousands of time. The more we do, the better product you get. Any issue, please contact us via email to enjoy an efficient satified solution. Happy Ipow, Happy Purchasing. No More twice think. Add to Cart Now!

User questions & answers

Question:	Can I remove it from one car to another
Answer:	I drive a Freightliner and have an iPhone 6 Plus. I have the metal plate mounted dead center on a screen protector on the back of my phone. I cannot use ANY of my cases, even super slim ones between the mount and the metal plate, otherwise the phone eventually giggles around. But using the mount without a phone case, it holds tight.
Question:	does it work with Samsung S8? Only noticed S
Answer:	I have used mine for over 3,000 miles, on all road types. I have an iPhone 6Plus in an OtterBox Defender case which is thick. Overall, I love this mount. The magnetic mount holds in almost all situations except for rough primitive roads and off-roading situations. Unfortunately, in those scenarios, the jarring almost always will send my phone flying onto the floor or the seat when I least expect it. Otherwise it is a great device.
Question:	Does it come with metal plates for phone
Answer:	I found the best way is @ the tab on suction cup use a credit/loyalty Type card and start with corner of card and slowly slide card behind cup until it releases from windshield
Question:	Will this work with an android phone
Answer:	I have bought many of these for family and friends after they see mine because they are fantastically convenient and sturdy as cell phone mounts. However, the threaded screw-on part has broken on two of the seven I have purchased. The nice thing is that Amazon always comes through with a full refund so I can buy another one, or they issue a replacement. It is easy to do this via Amazon Customer Service. They issued a full refund on one that broke 9 months after I bought it; and I bought another one.

Product description

IPOW Long Arm Design Car Mount Holder Safely and securely mount your smartphone all iPhone Series,Samsung Series and so on of most devices on market.To avoid your devices not damaged. Choosing us is your best choose!

Feature:

1.Strong magnetic phone mount head,long arm design with 2 metal plates

2.Hassle-free installation,feel easy to one-hand mounting while driving.

3.With a dashboard base to support the long tube arm.

Package Includes:



universal Magnetic Phone Holder X 1

long arm car mount X 1

metal plate X 2



We love our customers, If you have any problem regarding our service or product, Please do not hesitate to contact us through the linkage "Contact the seller"Many thanks!

• Upgraded Thicker Arm on Nov.18,2018. Stronger magnetic strength than other similars---Our magnet (N42) VS others (N38).The more the model No.,the better the magnetic strength. Strong magnetic cell phone holds your phone securely.
• Truck cell phone holder---Up to 13-inch arm makes your phone within arm's reach. Allow for one-hand operation. Flexible extra support base and sturdier aluminum ally arm keep your phone form vibrations.
• More durable---Nylon thread replaced the original plastic-made thread since 22th Feb, which has proven to be of better durabitlity after repeated tests.
• No residue left---Two-layer TPU suction cup sticks to the windshield firmly and leaves no marks after being removed.
• Compatible with phone case---Metal plate can attach to the back of the cell phone either with or without a case. An ideal magnetic car mount holder for assorted phones as well as GPS devices and Ipad.

User questions & answers

Question:	Will this magnet hold with excessive bouncing over bad roads? Also does it tilt on its own with normal use
Answer:	Yes, it will be a snug fit though. Just measured it and the base of the slot opening is exactly 15mm.
Question:	Will this work fo the iPhone 6Plus
Answer:	The second generation holds my Garmin GPS fine. It also comes with a second set of "holders" but the larger ones hold both my GPS & Iphone. I use my GPS on longer trips but if using the iPhone a lot I would switch to the tighter holders. The holders also can slide in for smaller GPS or Iphones and slide out for larger ones.
Question:	How do you remove the suction cup off the windshield? Mine is stuck and I'm having a hard time taking it off
Answer:	The second generation is at an angle that seem right. It's not straight up and down. You can't adjust the angle though. I put both my iPhone 6 & GPS in it and they fit. I used the wider inserts but it comes with tighter inserts too if you prefer when using your cell phone. The inserts also move along the pad so you can adjust for a bigger 6Plus phone or GPS.
Question:	I broke my bracket with threads. Where can I get replacement parts
Answer:	No sticky! It stays in place due to the friction between the silicone and the dashboard.

• PERFECT DIAGONAL CLAMP DESIGN NOT IMPACT ON THE SIDE BUTTONS OR SCREEN & GRASPS MORE STEADILY - The diagonal clamp of this car phone mount grasps the cell phone at 2 opposite corners then it will not like others that impact on the side buttons or even block the screen, and it grasps the opposite corners much more firmly than those clamp the 2 sides. Universal for all brands of cell phones of 3.5-6 inch (diagonal size) including iPhone, Samsung, HTC, GOOGLE, LG, HUAWEI.
• CAN BE MOUNTED ANYWHERE IN YOUR CAR AND OTHER PLACES - The enlarged strong vacuum suction cup base allows this car holder to be mounted firmly in your car anywhere with flat surface like windshield, dashboard, centre console, and you can use it in many other environments like home and office, attaching to any material of glass, wood, plastic, metal etc..
• ADJUSTABLE STRUCTURE SATISFIES DIFFERENT DISTANCES AND ANGLES - The bendable but solid arm and 360-degree rotatable diagonal clamp enable you to adjust the distance and angle as you need, ensuring your safe and comfort driving.
• HIGH QUALITY MATERIAL AND SOLID FIXATION - The environmental friendly high quality material and solid fixation ensure a perfect application and long life cycle, bearing a weight of 2kg and high temperature of up to 80 degrees centigrade, which means it will not fall off or become distort even if heavy cell phone and very hot weather.
• SELLER SUPPORT - One Year Warranty. If you have any issues with the item, feel free to contact us to enjoy hassle free service.

User questions & answers

Question:	Would this work with a Galaxy Note 5 in an otterbox
Answer:	This will work with any phone.
Question:	My question is about *depth.* My phone with case is 7/10-8/10" thick (deep), & the case is slightly convex. Can the holder accommodate this phone
Answer:	It is junk and will eventually break. I would get something else.
Question:	How does it release the phone
Answer:	Same here... I took 1 of the rubber pieces out to have it fit. Left one of the 2 so there was still some grip
Question:	Would this work for Galaxy Edge
Answer:	I have two of these, one on each bicycle, and I have never experienced a twisting problem. Both are rock solid and I feel confident that my phone is safe, even if I go down (has happened). My only concern is how to replace the rubber bands when they eventually fatigue.

• Auto Retractable Phone Clamp: Hands-free and super stable. No switch, no magnet, only smart mechanism. Simply put in/take out your phone in just one second. No complicated operation, most safe car phone mount for driving.
• Maximum Angle Adjusting: This Ipow car phone holder can be adjust by 3 knots, 360 degree rotation joint ball, 180 degree rotation clamp and 120 degree rotation arm. Easily find your perfect angle. No view blocking, no distraction, no danger.
• Versatile Reusable Phone Mount: With the ultra-strong sticky suction cup, this cell phone holder can be used both on dashboard and windshield. The suction cup is washable and reusable by rinsing it under warm water and let dry. We even designed an uninstall tab for easy moving.
• More Features and Broad Compatibility: It also features simplistic installation,special phone support feet with groove for small phones, durable high quality material, trendy outlook. Compatible with most smartphone with width from 2.4’’ to 3.45’’ including iPhone XR, XS Max, 8+, X, 8, 7, 6s, 6, Galaxy S10, S10+, S10e,S9 S8 S7, S6 S5 Note 9 8, LG G6, HTC and more.
• Hassle Free After Sale Service: Our phone mount is tested in real life for thousands of time. The more we do, the better product you get. Any issue, please contact us via email to enjoy an efficient solution. No More twice think. Add to Cart Now!

User questions & answers

Question:	What’s the diameter of the round suction cup and the 3M adhesive dashboard pad
Answer:	It is around 3 1/4 inches. Very nice product. Frequently bought together and well works with 🌈🌈Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter. High-end Car Music Player 🌈🌈
Question:	Can I both use it on windshield and dashboard
Answer:	Yes, it can be used on both dashboard and windshield. Dashboard the best. Because it can bend down which contributes to a no blocking driving view.
Question:	Can it hold samsungs with popsockets
Answer:	Nor based on the one I received...I have an Otter case and the device just hold the phone. Popsockets are thicker than Otter cases.
Question:	Will it hold the phone horizontally? Or is it just at a regular orientation
Answer:	It can be rotated to be sideways to hold the phone but it might not be secure enough to stay in place. Maybe if you aren’t moving and only parked will it stay in securely.

• Upgraded on Dec. 5,2018 with Thicker Stronger Long Arm/Neck. Perfect Truck Phone Mount, securely smartphone close to your fingers and sight.Design With clamp and extremely strong suction cup with very steady support base.
• Compatible Enough. X Clamp fits almost all phones with phone case Spigen case/Loppy case/wallet phone case/ring holder, double clips can be expanded up to max 3.54inches.
• Upgraded 3M Adhesive Dashboard Base Design. Extra sponge dashboard base offers extra stability and security, never got distracted while on the road.
• Reusable. Strong suction cup is easy to clean and recover stickiness.
• 360 Degree Rotation.Hold your phone in perfect angle.

User questions & answers

Question:	Will it work with a samsung galaxy 7 perx
Answer:	Germany
Question:	Does this mount support Samsung Galaxy s6 Edge
Answer:	This bit is 2" in diameter with an overall length of 24", only 18" of the length is useable. There is not an extension available for this bit. It fits into a SDS-Max combination hammer.
Question:	What is the distance between the 2 contact arms on the same side of the spring (not the opening of the spring
Answer:	It's designed for concrete. The shank is for a hammer drill and the drill head ponds and breaks the solid surface, rather than cut like a wood drill bit.
Question:	Is the only way you can mount this is in a cd slot? how would you then use your cd player? - thank you
Answer:	7/8". It fits the SDS Max drill.

Product features

IPOW CAR MOUNT HOLDER WITH LONG ARM

The IPOW Car Clamp will work perfectly with: iPhone Xs Max/XR/Xs/X/8/8P/7/6/6s/5/4/SE,Samsung Galaxy S9+/S9/S8/S8+/S7/Note 9/Note 8,oogle, Blackberry,LG, Huawei, HTC, ViVo, OPPO, Moto, ZET,etc..

Hold any smartphones 3.5inches IN WIDTH,it works perfectly with this Car Mount System.

Conveniently when driving for watching map or having a call or etc.

Super strong suction cup to adhere to windshield

Key Features:

Extra 3M adhesive dashboard base offers extra stability and security.

Long arm allows the phone to be closer to me while I am driving.

• Bonus 4 Metal Plates, Powerful N45 Magnets Hold Securely Larger/Heavier Plus Phones with Protective Cases---4pcs "Nd N45 magnets"+ 2.2" diameter large round magnetic clip surface.Phones won't vibrate in a bumpy roads/sharp turns/stop-and-go traffic.In addition,it is more convienient and hassle-free to slap your phone on than fidget it into a clamp.
• Strong Suction Cup---Strong lock mechanisms inside to keep suction cup from snapping and keep the whole holder from wiggling at the base;Heat-resistant gel adhensives,no need to worry about it will melt.
• Easier to Position & Shockproof Arm---Arm Dimension:7.6" Long,0.46" Thick.It has the right amount of resistance and takes less strength to bend it to your desired angle.
• Bonus 4 Metal Plates and Protective Films---You will receive 2 round+2 rectangle or 4 rectangle metal plates at random. Please use the rectangle one if your phone is big or heavy. To avoid any scratches or residues on your phone back, please stick the protective films to the front of magnet plate or the back of the phone/phone case.
• We offer prompt efficient after sale service to ensure a happy purchasing. For any issue among the using of our product, you are warmly welcomed to contact us by e-mail. Our professional customer service is always there for your until you are satisfied with the solution.

User questions & answers

Question:	I am hoping to use this with an iphone 11 pro and pop socket. is there a magnet that will fit next to the iphone 11 pro camera
Answer:	No the back camera doesn’t have a screen protector but the case does come with a built in screen protector for the front camera and front of the phone.
Question:	Does this include metal plates
Answer:	No parece tener un adaptador para un clip de cinturón
Question:	Does the sticky gel on the suction damage your dash when you remove it
Answer:	not an I phone 6, not sure about 6 plus. we bought one to fit the I phone 7 plus and it fit perfect and is very protective. If you put in phone cases to fit I phone 6 and it comes up then it should work and show all the other cases that would work to.
Question:	Will this hold a garmin nuvi 2597 gps as far as weight. also the gps is always plugged in- will the magnet interfer with the operation of the gps
Answer:	No, our static case does not work with wireless charging

Product features

Four Metal Plates

You will receive 2 round+2 rectangle or 4 rectangle metal plates at random.

How to Remove Suction Cup

Please don't remove the suction cup directly, unlock it first and pull up the small tab slowly to remove.

Wash to Restore Stickiness

If the suction cup is dirty, please wash it by warm water and air dry to restore the stickiness.