14 best iphone car holders

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• 【2020 Latest Design-Never Fall Off】Miracase car phone mount adopts 2020 latest fall-proof locking design which holds your phone securely to the vent. The clip hook will catch one of the car air vent blades. The spring-clip plate and the tightening nut will provide absolute fixation. This car phone holder has stable trapezoid-structure clamps with thickened shockproof sponge and rubber, which could hold the phone steadier than others. It will never fall out like other products no matter how bumpy
• 【Universal Compatibility】Miracase car cell phone holder has an adjustable mount which makes it widely compatible with smartphones or electronic devices from 4.5 to 6.5 inches(width size from 2.1-4.05 inch),such as iPhone 11 Pro Max / 11 Pro / 11 / XS MAX /XS/XR/X/8/8 Plus/7/7 Plus/6s/6 Plus. Also compatible with Samsung Galaxy Note 10 / Note 10+ /S10/S10+/S9 / S8 / S8+ / S7 / S7 Edge / LG Google etc.
• 【360 Degree Adjustable View Angle】The 360-degree rotatable head will provide you with the best viewing angle, so you could see the phone screen clearly and keep secure driving rather than limited by view angle or unwieldy phone holder for car. You can place your phone in any orientation(horizontal, vertical and more), it is easy to ensure driving security with this handsfree air vent phone holder for car. Just enjoy the best driving experience.
• 【Single-handed Operation】With quick-release button and adjustable clamp arms, Miracase car air vent phone holder makes it very easy to insert and remove your phone with a single hand. Provide you with safer driving whether you are talking, navigating, listening to music or charging.

Product features

Miracase Car Phone Mount-2021 Upgraded Version

Miracase Phone Holder for Car

2021 Upgraded Vent Clips:

Miracase car phone holder adopts 2020 latest design, it will never fall off even on bumpy off-road roads.

Great Choice for Decent Present:

Unique design inspiration makes it stand out,it's a great holiday gift for family and friends.

Installation Instructions

1. Unscrew the screw nut 1, place it onto the ball head.
2. Insert the ball head into the socket of clamp head until you hear a "click".
3. Tighten the screw nut 1.The tighter the nut, the harder it is to rotate the clamp head.
4. Loosen the screw nut 2 until it attaches to the screw nut 1.
5. Make the clip hook downward and pull open the clip plate,push the hook into the air vent grille to catch a blade,then release the spring clip plate to make it fix to the air vent.
6. Make sure the product is already installed stably,then tighten the screw nut 2.Installation complete!!

Note:

• Don't install the product on the blade at the top or bottom.
• Remember to never text while driving.

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• Secure Stable Install: The VICSEED phone car holder with the latest improved vent clip [ Won't break & Drop off ]. The car phone mount attaches easily and securely to most of air vent. After take few seconds to install it well, if you hit a bump or a sharper turn the phone holder will stay in a place. It ensures a safe, distraction-free car environment
• Perfect Protection: Say goodbye to the easy-scratched plastic panel phone mount. VICSEED cell phone holder for car adds a upgrade high-density silicone material with excellent resilience. The car mount for phone is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices
• Easy to Adjust & Multiple Viewing Angle: This cell phone car mount has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. The samsung galaxy note 2 car mount allows quick switching between vertically and landscape view .Position your phone at the perfect angle to enjoy a more relaxed and safer drive
• Secure Grip & One-button release: This cell phone car mount vent owns the thick arms built-in anti-slip rubber pads, which makes the car mount for iphone 6 can secure grip your mobile phone. No need worry your phone will fall off from the car mount for iphone 7. It ensures a safe, distraction-free car environment. The samsung galaxy s7 car mount also features a One-button release system that enables you only take 0.1S to lock or release your phone with one hand operation
• Friendly Design: VICSEED upgrade iphone car holder owns adjustable foot, the function not ony has avoid some cell phone power or volume button will be squeezed by the clamp arm but also make the iphone holder can fit well for big phones.Fit well for all mobile phones between 4''-7''in width and most thick case

User questions & answers

Question:	can hold on Samsung note
Answer:	Yes, the car phone holder can hold on Samsung galaxy note7 Welcome to buy VICSEED
Question:	Will this work for Samsung A
Answer:	Yes, this Phone car holder can work for your mobile phone welcome to buy Best Regards VICSEED Direct
Question:	can you charge your phone while using the mount
Answer:	yes you can. The iphone car holder with a slot at the bottom where you can run a cord to your phone and plug it into your charger.
Question:	Will this fit for my iPhone Xs
Answer:	Yes, the car phone holder mount can fit iPhone XS.

Product features

VICSEED 2020 Upgrade Air Vent Clip Non-scratch Silicone car cell phone holder

Easily secure the Car Mount to your air vent with the upgraded clip, providing strong stability that wouldn't rock back-and-forth.

The phone car mount covered in a thick layer of silicone that will protect your expensive phone from scratch.

Why Choose VICSEED Car Vent Phone Mount?

• Say goodbye to bulky phone holder for car windscreen which just aren't>
• No more being distracted by your phone sliding off your dashboard.
• No more oversized car mount blocking your windshield.
• No more car suction phone holder which don't work when it's too hot or cold.

Easily to Use VICSEED Car Cell Phone Mount Clip

1:Unscrew the clip by rotaing.

2:Install the iphone holder for car into your car air vent, then close the clip by rotaing to make it fix to the air vent.

VICSEED iPhone Car Mount Main Features

• Works with all smartphones 4~7 inch mobile phones, including Apple iPhone, Samsung Galaxy, HTC, LG, Google, Motorola, Xiaomi, etc
• Easy to install and use, the android car mount can install in a few seconds
• Enough deep arms can support THICK Phone case (Thickness of the phone case’s back should be less than 0.5in.)
• Adjustable bottom for larger phones
• Release button can let you put and get phone easily
• Multi-angle & adjustable, 360 degree ball-joint rotation

Support charging while driving

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Work well all year round

Constructed of durable, sturdy airliner PTFE material and rubber, this will hold your device securely in place even in extremely harsh environments.

Support big phones

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our air vent car mount universal phone can hold your big phone better fit.

Compatible Devices

• iPhone 12 / 12 Pro / 12 Pro Max / 12 Mini / 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4
• Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 / S7 / S7 Edge / S6 / S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s
• LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ
• Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel
• Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc
• Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.
• What's in Box
• 2xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• [Multi-function Cell Phone Holder] 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. One small car mount or car vent mount feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Stable and Safe Car Phone Mount] Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.
• [True Universal Cell Phone Holder for Car] Super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. It is compatible with iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360 Degrees Rotation Car Cell Phone Mount] The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. Find a best view for your trip. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of jobs for you.
• [One Hand Operation Phone Car Mount] After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Release your smart phone by pressing the left bottom release button in one second. VICSEED smartphone car mount gives you an easy and safe driving journey.

Product features

Adjustable Foot

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our car mount can hold your big phone better fit.

Thick Case Friendly

The depth of the holder is 0.67''. VICSEED phone mount fits small or thin phones perfectly. It also fits for thick or large phones, and with super thick cases. No need to take off phone cases any more. Just drop your phone in it, it will do the rest of job for you.

Reserve Charging Port

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Strong Clamp Power - Fit for All 4.5'' - 7'' Phones

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• UPGRADED VERSION: Thank you for our customer who feedback the problem about the base too small could not fit the bigger cup holder and the knob is hard to turn. Be assured that TOPGO always take customer experience as first concern, so we release this Upgraded Version immediately to solve the problem. Now you can purchase confidently.
• SIMPLE TO INSTALL: Cup holder phone mount is Adjustable and fits firmly and perfectly，securely in the cup holder for car, truck or SUV, fitting to varying size cup holders in your vehicle.
• ADJUSTABLE GOOSENECK: Up to 8 inch long neck, makes it easier and flexible to operate and access your mobile phone. You can adjust the height as you like, achieve maximum flexibility.
• UNIVERSAL CELL PHONE HOLDER: Suitable for all types of 2.01' - 3.54' wide devices, such as iPhone 11 XS/x/8/8 Plus/7/7 Plus/6 Plus, Samsung Galaxy S9/S8/S7/Note8/Note9 , Huawei, HTC,LG, GPS,PSP etc.STRONG AND DURABLE: Made with an adjustable heavy base and durable plastic, the phone holder will securely lock in your cup holder. Holder has extended arms for wider depth and longer length, 360 degree rotation for desired position vertical or horizontal mode.
• NOTE: Phone holder can not fit the phone with battery case, support maximum 0.51" thickness device,The maximum size of the Phone cradle-holders base is the diameter 4“, Please carefully compare the size of the car cup holder and the product before purchase to ensure that this product can be placed in the car cup holder.SECURE GRIP & ANTI-SLIP SURFACE: The curved arm and 2 holding feet provide all-round protection for your phone. Soft sponge cushions protect the devices from damage.

Product features

TOPGO Cup Holder Phone Mount Universal Adjustable Gooseneck Cup Holder

Reasons you should choose our TOPGO Cup Holder Phone Mount:

Highest quality, innovative design, and easy to install.

Awesome Solution for Driving with a phone, you need not worry about the phone holder that connects to the windshield since it bounces.

Flexible mount that allows different views if needed, such as when the sun hits it, reflections, etc.

Happy or not happy about our products, our friendly team are always waiting for you to connect with us.

Keep Your Dash and Window Clean

At innovative design, our TOPGO Cup Holder Phone Mount will not obstructs your view when you driving, you do not have to affix anything to your dash or window, just simply put it in your car cup holder and fix

Easy to Install - Step 1

1. Hold the phone holder upright, Insert 4pins from the gooseneck bracket into 4 holes in the back of the phone holder (as the photo below)

2. Push the bracket up until you feel it "click"

Easy to Install - Step 2

Place base of phone holder assembly in the vehicle cup holder.

Easy to Install - Step 3

Twist knob on top of base clockwise to tighten and counter clockwise to loosen.

Easy to Install - Step 4

Press the top button on the phone holder to expand the clips.

Position bottom clip on the bottom of the phone.Squeeze side clips to hold the phone

• Upgraded Vent Clip: Features a stronger, larger vent clip and an innovative support frame to provide extra support, it can hold your phone securely on an air vent in your car
• Upgraded Phone Cradle: Design with a larger cradle to keep your phone stable in place. With the instant release button, you can push the phone cradle arms in to secure your phone and press the button to release
• Ideal Viewing Angle: A 360° rotating and pivoting ball joint allows you to adjust and quickly switch between portrait and landscape view
• Adaptable Attachment: Features a 3-levels locking knob to easily and firmly fix the air vent mounting grip on your car air vent
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold my Galaxy S
Answer:	It can be used on any phone smaller than 6.5 inches, so it can definitely be used on your Galaxy S8
Question:	How many magnetic plates come with the product
Answer:	There are two magnetic plates.
Question:	will this work with a small phone like the original iPhone SE, or new iPhone 12 mini
Answer:	It worked . ihave iphone 12
Question:	Can I remove placement and place somewhere else
Answer:	Yes, you can remove the holder to wherever you want to set. The viscose of the pedestal could be reused after you wash it by warm water.

Product features

AUKEY Car Phone Mount

• Upgraded Stronger Air Vent Hook Clip, flexible fit to attach to thicker or thinner air vents.
• Firmly holds your smartphone or GPS.
• 360-degree rotation for the ideal viewing angle.
• One-button phone release.
• High-quality materials and finish.

The phone cradle release button has been relocated to the top at the back for easier access and smoother phone retrieval. The phone cradle has also been improved to hold your phone firmly even on the most bumpy roads.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint.

Upgraded Stronger Air Vent Hook Clip

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Adjustable Phone Rest

Extends to fit bigger phones. Four positions to choose from.

Keep Your Case On

Fits regular phone cases too.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Upgraded Mount

With a larger cradle and stronger grip, it can hold your phone firmly in place even for a big one.

Step 1

Flip the grip release knob to the widest air vent mounting grip gap. Clip the mount on your car’s air vent and then flip the grip release knob to to lock.

Step 2

Press the phone cradle release button and adjust the phone rest so that your phone is positioned at the right height in the mount.

Step 3 Press the BACK EDGE

Press the BACK EDGE of the cradle arm tips to push the phone cradle arms back in, so they grip your phone securely.

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

• WIDER COMPATIBILITY: New larger Easy One Touch button and cradle allows for wider device & case compatibility.
• MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located on the bottom foot
• TELESCOPIC ARM: The improved telescopic arm now extends from 5” to 8” (as opposed to the Easy One Touch 4 which only extended to 6.5”) and pivots 225 degrees. This enables a myriad of customized viewing angles while you’re on the road.
• REDESIGNED BOTTOM FOOT: Easier to secure and adjust; simply squeeze the spring button and pull down.
• ENHANCED SUCTION CUP: Redesigned suction cup with an improved sticky gel formula that provides a stronger, lasting hold.

User questions & answers

Question:	Will the adhesive patch damage a leather dashboard
Answer:	I would assume so but it isn't very adhesive honestly I have to wet the sticky part for it to stick to my dash
Question:	Will this cradle hold iphone 11 pro? I have older version for my iPhone 6+, it's still functional & I luv it but my 11 pro does not fit it
Answer:	It fits my iPhone 12 Pro Max, easily
Question:	Is it applicable for windshield as well
Answer:	Yeap! I’ve had mine on my windshield since the day I got it and no issues at all. It’s very sturdy and hardly moves even on bumpy terrain. Hope this helps!
Question:	How wide is the cradle? (How wide can a phone be before it won't fit
Answer:	I used this for my iPhone 8 Plus with an Otterbox Defender on it (not a slim combo) and it was plenty wide enough.

Product features

Telescopic Arm

Arm pivots 225 degrees for custom viewing angles on the road

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying

Mount Foot & Magnetic Organizer

New Foot easily adjust to standard & large smartphones, and helps keep cords organized

What's Included

Includes Mount, Dashboard Pad and Cable Tag

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

• Andobil Multifunctional Car Phone Mount: With the latest improved suction cup and vent clip [ stronger & tighter ], this cell phone holder can hold your phone firmly on dashboard windshield or air vent, even on the bumpiest road. Better yet, it comes with a 2-step locking system, which provides more reliable attachment to your car.
• Easy One-Touch Operation: Just a simple touch to mount or remove your phone within seconds - Super easy to use while you drive. It also features an adjustable foot, making this car mount universal for any cell phones up to 7”. Compatible with iPhone/ Samsung Galaxy/ LG/ Pixel, etc.
• Extreme Flexibility: Thanks to the 360-degree swivel head, your phone can be oriented to portrait, landscape, or any angle in between. For added convenience, it has an extendable long arm to keep your phone always in view - And ready for hands free calls, GPS navigation & music streaming.
• Better Design Than Ever: Andobil phone holder for car is made with the most superior ABS plastic and anti-scratch cushion, which ensures full protection of your beloved phone. Moreover, the sturdy arm and stable ball joint can increase its durability. You won't need to worry about your phone falling anymore.
• What You Get: Andobil car phone mount *1, improved suction cup *1, upgraded air vent clip *1, dashboard pad *1, user manual *1. They are fully protected in exquisite package. It will bring an easy and safe driving experience to you and someone you care about.

Product features

Andobil Car Phone Mount

Meet Easy Clamp 2.0 - Andobil car phone mount 2nd generation. After so many tests and redesign, we've improved it to the best version ever. Andobil team has studied all the feedback to make it ideal for your daily drive.

• When it comes to a stronger suction cup, the stickier gel and thickened pad of this holder is all you need.
• With the 1-sec quick release button, you can mount or remove the phone faster and more smoothly.
• Horizontal or vertical, closer or further. This flexible motion allows free reach to your mobile.
• Best 3-in-1 mounting solution for your car. Feel free to use it on the dash, windshield or air vent.
• Versatile for different cellphones and cars in the market. Start to add some intelligence to your drive.

The goal of this car phone holder is simple: To securely hold your phone in place, while you just keep focused on the road.

Adjustable Foot

If your phone is large size, you can pull the foot down. So our phone car mount can hold your big phone better fit.

360° Free Rotation

Full 360° rotation allows limitless possibilities, including landscape and portrait viewing.

Hassle-free Charging

Reserved space for your charging cable. Juice up your phone freely on a road trip.

Best Phone Holder for Car

Does it support all mobile phone models?

This car phone mount fits most phones from 4” to 7”. It’s compatible with iPhone 12/ 12 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS Max/ XS/ XR/ 7 Plus/ 7/ 6s/ SE,

Compatible Samsung Galaxy S20/ S20+/ S20 Ultra/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 9/ Note 8,

Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

Please Note: The thickness of the phone case’s back should be less than 0.24in.

Any tips for the adhesive dashboard pad?

1. The dash pad is for One-Time use. Once installed, it’s too sticky to remove. Please think twice about the location.

2. Before mounting the suction cup, please let the dash pad sit for 24hrs.

3. We do not recommend it for soft/ curved/ leather/ wood/ plush fabrics/ filmed glass surfaces. In such case, please install it on the windshield or air vent instead.

4. If the weather is getting too hot, please use the air vent clip instead.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.