12 best i phone i pad tablet stand

Product description

An Amazon Brand

• Portable stand for comfortable, hands-free viewing of a 4- to 10-inch tablet, e-reader, or smartphone
• Easily adjusts to multiple viewing angles using convenient side button; holds device in either portrait or landscape position
• Compatible with Kindle, iPhone, iPad, Samsung Galaxy / Tab, Google Nexus, HTC, LG, Nokia Lumia, OnePlus, and more
• Removable rubber pad for slip and scratch-resistant performance
• Durable zinc-alloy body can hold up to 11 pounds; folds flat when closed
• Backed by an Amazon Basics 1-Year Limited Warranty

User questions & answers

Question:	I have an old Samsung tablet that is 11.5" x 8". Will this stand be sturdy enough to hold it
Answer:	I assume so. I have used it in the lighter slot in 3 different cars with no issues at all.
Question:	I have an iPad with a Lifeproof case. Will it fit in this stand
Answer:	I'm a big critic when I hear an effect on music/poor quality music but I have had no issues when I use my iPhone 6 with an AUX and charge my phone with this at the same time. This product has no effect on the sound quality.
Question:	does this fold flat for travel
Answer:	Most modern cars remove power from the accessory sockets when the ignition is turned off, so you would not expect any problem to occur. You can see if your car is like that by checking the blue light on the Anker charger to see that it goes out when you turn off the ignition. My 2017 Mazda CX-5, however, has two accessory sockets which operate differently. The one in the dash works like other cars I've just described, but the one in the compartment under the center armrest is powered even when the ignition is off. This means that a charger left there with nothing attached will always use a small amount of battery current, mostly, I would guess, for the blue LED. I measured this current at 20.8 mA, which is relatively small. That might drain 10% of the car battery capacity in about 12 days. Remember that other electronics in the car draw battery current also while the ignition is off, including the entertainment and security systems, clock, etc. I don't think the Anker charger represents a significant problem, but I have measured less than half of that idle current on a different manufacturer's car charger. I should also add that the Anker charger does not fit the Mazda socket reliably in the 2017 Mazda CX-5, due to its wide shoulder behind the center pin.
Question:	Can the angle be adjusted or is it only for one position
Answer:	This PowerDrive 2 Car Charger supports the Power IQ. But the Samsung S6 supports the Qualcomm Quick Charge. They are two different charging technologies. This charger can support to charge S6, but it does not support to fast charge S6.

Product description

An Amazon Brand

• Compatible with Apple iPad 1, iPad 2, the new iPad, Kindle Fire, Kindle Fire HD, Kindle Touch, Kindle e-Reader and other tablets and e-Readers with or without a case or sleeve
• Extremely portable, fits in any bag or pocket
• Non skid base design keeps the stand secure on flat surfaces
• Distributed by Amazon.com; backed by one-year Amazon Basics warranty
• Ships in Certified Frustration-Free Packaging

User questions & answers

Question:	Does this work with smartphones as well? For example, could I use it on both my galaxy s3 as well as a nexus
Answer:	I have a S3 and a Nexus 7, I just went and grabbed the stand and propped my phone up no problem. Obviously it requires adjusting the width of the legs and the angle of the back supporter, but you can get an almost 90 degree angle and it is still sturdy. If you wanted to prop the phone vertically you'd have a problem with it being wobbly because the legs would have to be all the way closed together but you could still pull it off. I hope that helps!
Question:	Does it hold it in landscape poistion
Answer:	This stand holds an Amazon Fire HD 10 in landscape mode. It holds the tablet securely.
Question:	Will this work with a 13.3 inch tablet
Answer:	I'm using this with a Google Pixel slate in the landscape mode when I don't want to use the keyboard case (i.e. I just want to use it as a tablet) and it works brilliantly. In fact it works better than it does with my iPad.
Question:	If you press the top left or top right of the screen doesn't the tablet tend to flip
Answer:	If you push the top right corner, then the bottom left corner would have to come forward in order to flip anything over. That just doesn't happen with such deep grooves in the base. If anything, you'll just slide the stand back if you push too hard in landscape mode...or knock the whole thing over in portrait mode (and you'd *really* have to be abusive for that to happen).

Product features

Adjustable Stand

This adjustable stand has 2 vertical pivot points so you can position your tablet at virtually any angle for comfortable work, reading or viewing.

Horizontal or Vertical

Perfect for work, home or travel, place your tablet vertically to read books, view recipes or surf the web. Turn it horizontally to watch movies.

Compatibility

Works with any size tablet device, including but not limited to: iPads, Samsung Galaxy Tabs, Kindle Fire and Kindle e-readers, and the Nexus 7.

Dynamic Use

From watching movies to working from home, you can add accessories such as a Bluetooth keyboard or use the stand on its own.

Product description

Fits for All Phone.Our Stand will always keep your Phone standing out from any clutter. Simple also elegant. To hold the iPad on the Stand. You can still watch videos comfortably when eating with a knife and fork.

• Compatible with Apple iPad series , iPad mini series, the new iPad, Kindle Fire, Kindle Fire HD, Kindle Touch, Kindle e-Reader and other tablets and e-Readers with or without a case or sleeve.
• Extremely portable, fits in any bag or pocket.
• Non skid base design keeps the stand secure on flat surfaces.
• Ships in Certified Frustration-Free Packaging.
• WHAT YOU GET: 1 Pc ORIbox Stand.

User questions & answers

Question:	Does it work with iPhone facial recognition
Answer:	Yes, they work when riding my mule.
Question:	I have a cover on my phone, what is the dimensions of the opening to hold the phone
Answer:	yes, I was kinda worried that they wouldn't fit me (I have small ears and sometimes when I use earbuds they fall from them all the time), but these fit just great! They come with 3 different sizes of ear tips so they fit you no matter the size of your ear. I find them really comfortable to wear and really discrete, which I love.
Question:	Is the oribox adjustable tablet holder stand (with the fold-out legs) made of metal, or plastic
Answer:	the comfort in wearing them. I generally cannot wear earbuds of any type very long without them hurting my ears, but with these, I took this headset for several hours to watch movies and listen to songs. I didn't feel ear plugged. It was very comfortable. Sometimes I forgot to wear headphones.
Question:	Would the silicon bike holder still work if I have a ring holder attached to the back of iPhone
Answer:	There are plenty of USB-C accessories that work with this iPad. Basically anything that works with the newer iPad Pros work with the gen-4 Air. I bought this super-useful dock on Amazon that connects to the iPad's USB-C port and gives you all these extra goodies: 1. Extra USB-C port so that the iPad can keep charging while connected to a hard drive or other peripherals. 2. HDMI 2.0 - supports up to 4k@30Hz 3. USB 3.0 A port (full size) 4. SD card reader 5. Micro SD card reader 6. 3.5mm headphone jack

• 3 VIEWING ANGLES - Get comfortable, then let Flippy do the work of holding your tablet or book at the best angle for you. Rotate Flippy for 3 distinct viewing angles for every reading position and change in lighting: your lap, sitting upright, or lying flat
• SOFT, STURDY, LIGHTWEIGHT - Flippy is made of lightweight foam with an ultra-suede cover for a sturdy and flexible design that weighs only ounces. The plush polyester exterior is extra soft and can be wiped off with a damp cloth.
• TABLETS, E-READERS, iPADS - Flippy tablet pillow is compatible with most tablets, e-readers, smartphones, and reading materials including: iPad mini, air, pro, iPad 1 - 4; Samsung Galaxy tablets, Kindle, HTC, LG, Nokia Lumia, OnePlus, Dragon Touch & Google Nexus, kids tablets, books, magazines, textbooks - you name it!
• SMART DESIGN - Designed by an optical engineer to provide 3 different viewing angles has 3 sides of specific height & angle: 8.5” (49°) x 7.9” (70°) x 6.6” (61°), 11.5” in length.
• TECH GIFT - Flippy is a year round tablet accessory gift for iPad, e-reader, tablet, and book lovers. On the couch, in the kitchen with a cookbook, reading in bed, doing homework in the car, Flippy is terrific for readers of all ages.

User questions & answers

Question:	I read alot in bed. I read on my side. would this work sitting on a bed
Answer:	What year?
Question:	Could this hold a textbook securely
Answer:	Yes, there is a spot where you can remove the power outlet part and add the apple extension cord.
Question:	Would this be good for a person with only her right hand available to turn the pages? remember we still need to swipe/push/ turn ;) Thanks
Answer:	Well do you have the magnetic t shape charger on your 2011?
Question:	will it hold 12.9 ipad
Answer:	I bought it about a month ago from IT-center and was very happy with it, but it seems like that seller is no longer selling it...

• This cell phone holder has an ergonomic design where you can raise your phone screen to eye level which can be easily adjusted by hand and provides a comfortable viewing angle of your liking
• With its anti-slip design, the pad back and the bottom of this desk phone stand are fully covered by anti-skid silicone, which can provide maximum protection for your device from any scratches and slide
• This mobile phone stand has wide compatibility which is suitable for all smartphones and tablets. It is compatible with any Apple or Android smartphone and iPad or tablet between 4-10 inches
• A hand-free desktop phone holder with an adjustable phone stand best to use for home/office to prop up your mobile device, easier for gaming, TikTok, Facetime, video calls or meetings, etc.
• Why choose Aduro? Because we back our Adjustable Phone Stand For Desk with a lifetime limited warranty and friendly 24/7 US customer service, so you can buy it with confidence and have complete peace of mind

User questions & answers

Question:	Will the device permit angling the phone to be parallel to a flat table for mobile banking photos
Answer:	the holder is rubber and stretches to fit over the phone cover..... I have a cover on my phone,and it works.....should work for you!...
Question:	What is the holder made of? Plastic or aluminum
Answer:	Hello,the oribox adjustable tablet holder stand (with the fold-out legs) made of plastic.
Question:	How low does the stand go? I want to set it on my nightstand to hold my phone in overnight clock mode and not easily fall over when hitting snooze
Answer:	No, you need to remove the ring holder.
Question:	is this compatible with cases that have a pop socket
Answer:	Only two very simple steps, open the case, select the earbud in Bluetooth menu. After the initial connection, the next time you open the case, it will connect your phone automatically.

Product features

Aduro Universal Stand with Adjustable Height for Smartphones & Tablets

Our Aduro Universal Stand with Adjustable Height will help you get the screen at your preferred level. No need to bend down or have a bad posture while using your phone or tablet.

• Our Desk iPad Stand Holder is made of high-quality aluminum alloy with a nice finish. It's stable, doesn't wobble, and has rubber non-slip pads that protect the surface of your phone case and desk from scratches
• This iPad mount is fully collapsible, it can be easily adjusted to the ideal position, free your hands, which is the ideal iPad accessories perfect for watching videos, viewing recipes, and much more
• Well-designed with a reserved charging port that lets you charge your phone or tablet when using this stand. This iPad holder for desk has a 270° rotatable neck and base gives a better viewing
• The Foldable iPad Stand is compatible with all 4-12 inches smartphones and tablet models in cases such as iPhone, Samsung, iPad, Android Tablet, Nintendo Switch, Kindle, eBook Reader, etc.
• Why choose Aduro? Because we back our Tablet Holder and Phone Stand for Desk with A lifetime limited warranty and friendly 24/7 US customer service, so you can buy it with confidence and have complete peace of mind

User questions & answers

Question:	Does it fit iPad 7th generation
Answer:	From bottom to top, the lowest is about 8 inches. From the bottom to the cradle where the phone rests is about 4.5 inches.
Question:	would this fit a switch lite
Answer:	I have one on the back of my iPhone 11 and it does work fine.
Question:	What is the maximum thickness of device that will comfortably fit inside the curved supports
Answer:	Yes.

Product description

SMALL STAND, LARGE STABILITY - Free up your hands with Adjustable Cell Phone Stand



∠250° &∠270° ajustable angle positions your phone or tablet at a desirable viewing angle to provide you a hands-free operation.

You may need 3 stands to meet different demands: One on your desk to check emails, one on your bedside table to enjoy movies and one in the kitchen to enjoy personal life or recipe online.



Advanced Elegant Design



The cell phone holder is made of aluminum alloy with elegant smooth edge, and silver anodized finish of the stand matches any Apple accessories. It is of superior quality and scratch resistant.



Durable Construction



We adopt full thickness aluminum which is 3 times more stable than other normal phone stand holders to prevent tipping over. The aluminum panel acts as a heat sink to cool devices when charging.



Horizontal or Vertical



Place your cell phone or tablet vertically to FaceTime, read books or surf the web or turn it horizontally to watching video, video recording, viewing photos and playing games.



Universal Compatibility



? For all Size Smart phone, E-reader, Tablet and Laptop ( Thickness within 1cm ), and protects them from scratching and sliding.



Packing List



1 x Phone & Tablet Stand(Cell phone/Tablet is not included)

• UPDATED VERSION "DOUBLE" MULTI-ANGLE design make cell phone stand possible to be adjusted to your desired angle. And compared with other phone stands, the hook of our stands have been widened in order to fit well with the devices in protect case.
• "DOUBLE" MULTI-ANGLE There are 2 hooks, one with ∠250°, one with ∠270°. It can be easily adjusted to your desired angle with your hand.
• UNIVERSAL COMPATIBILITY Stand for cell phone work with all size smartphones and e-readers, such as Nintendo Switch, iphone 8 / X / 6 / 6s / 7 / 7 plus, Galaxy S8 / S7 / S6 / Note6, LG, Motorola, HTC, IPAD mini, Samsung Tab, Google Nexus, Kindle, Laptop ( Thickness within 1cm ) and so on.
• STURDY CONSTRUCTION& RUBBER PADS Durable aluminum body, with a sturdy construction, can hold your phone steadily.
• STURDY CONSTRUCTION& RUBBER PADS Durable aluminum body, with a sturdy construction, can hold your phone steadily. SMART LIFESTYLE Hands-free, make it possible to play games, use Facetime and Youtube while charging. Play a good role in your office, kitchen, nightstand, dining table.

User questions & answers

Question:	I have 2 small hdmi monitors that are 4.5" tall each, can this old them one over the other
Answer:	It can handle a small cell all the way to a large tablet so yes it can handle a switch or switch lite.
Question:	Does this phone stand hole either your iPhone or iPad
Answer:	Max thickness is approximately 1 inch so It can handle curves and cases.
Question:	will the top one go all the way back to where it is almost flat on the surface? like if you were using a tablet & phone to go live with
Answer:	It should allow you to get the phone horizontal so that the main camera is parallel to the table. You will need to ensure that the bottom of the phone stays in the "cradle" at the bottom so it doesn't fall out
Question:	Can it hold two tablets at the same time
Answer:	Mine has a white plastic base, the pole/rod appears to be aluminum.

Product description

ORIbox Cell Phone Stand ORIbox Cell Phone Stand Holder Mobile Phone Dock Compatible for iPhone 12 11 Pro Xs Xs Max Xr X 8, iPad mini, Samsung,Nintendo Switch, Tablets (7-10") and All Phone Black

• Adjustable Viewing Angle: The multiple viewing angles allow you put it on the desk, in the kitchen, perfect for watching videos, viewing pictures and playing games in your home. Just open it and find a best angle to use it
• Compatible with MOST Devices: ORIbox Cell Phone Stands are compatible with most 4-10.5 inch smartphones - For iPhone 12/12 Pro/11/X /8 / 7 / 7 Plus / 6s / 6s Plus / 6 / 6 Plus / SE, Samsung Galaxy series, HTC, LG, Nokia, iPad /iPad mini series, e-readers, etc
• Light and Easy to Carry: With Fold-Up function, the pocket-size Cell Phone Stand is super easy to take out wherever you go. Great desk accessories in the office and house. You can also put it in your case, bag and even your pocket
• Stylish and Reliable: Cool Black fits phone of any color. Made of durable and light ABS, since it has a 85mm wide back support and wide anti-skid pads beneath the bottom of the stand, protect your device from scratches and sliding
• WHAT YOU GET:1 Pc ORIbox Office Phone Stand Adjustable

User questions & answers

Question:	Will the metal plate work underneath the phone case or is the magnetic strength not strong enough
Answer:	Yes it will hold either one, or both I don’t believe it will hold 2 iPads at the same time, it might but I have not tried that. It will hold 2 iphone or a Iphone and a iPad at the same time.
Question:	Where can I find metal discs for the back of the phone
Answer:	The top one can be positioned so it is vertical.
Question:	Why won’t this product work with my Apple MagSafe wireless charger
Answer:	I would say probably no, at least not in the configuration that you see in the picture. I believe you could twist it around to where the tablets are one behind the other, but note that the tablets will only fit if they are not in a case. Mine will hold an iPad mini in either dock, with no case.
Question:	Is it possible to open it, remove the magnets, and reassemble? I plan on gluing a magsafe charger to it, only if I can remove the internal magnets
Answer:	The dimensions between the iPad Pro I have(11) and the iPad 7th generation (10.2) are negligible. I don’t see any reason why the stand couldn’t accommodate your iPad. Not much difference in size.

Product description

Display your smartphone or tablet anywhere with this powerful, multi-surface display mount. This versatile stand sets up easily on a desk, counter, or tabletop With a pair of expanding legs; or on a door, wall, or window using one of the two included mounting cradles. The arm’s 3 flexible joints offer endless positioning options, while a ball socket connection allows 360-degree rotation in the holder. This adjustable holder uses a spring-based tension mechanism to secure your smartphone or tablet. The whole stand folds nearly flat when not in use for convenient storage and portability. Ball socket in holder enables portrait and landscape display orientations> 3 flexible joints for angle adjustment, arm extension, and compact folding> folds nearly flat for convenient portability Slide-adjustable, Resizable tension holder> compatible with smartphones and tablets between 5.125 and 7.25 inches in height or width, including iPhone 7, iPhone 7 Plus, iPad mini, iPad Pro 9.7, new iPad (2017), and morespecifications: Dimensions: 12” x 12.75” x 7.5” Weight: 1.25 lbs. Holder range: 5.125 – 7.25 inches> Holder depth: 0.6 inches> base Dimensions (tabletop setup): 12.75” x 7.5” Maximum arm length: 12 inchespackage contents: multi-joint desk and wall mount adjustable holder set of mounting hardware set of mounting adhesive wall cradles

• Easy, adjustable tablet Display on desks, tables, walls, windows, and more
• 2 wall cradles, with included mounting adhesive and mounting hardware
• Ball socket in holder enables portrait and landscape Display orientations
• 3 flexible joints for angle adjustment, arm extension, and compact folding
• Compatible with smartphones and tablets between 5.125 and 7.25 inches in height or width, including iPhone 11, iPhone 11 Pro, iPhone 8, iPhone 11 Pro Max, iPhone X, iPad mini 5, iPad Air 3, iPad 10.2-Inch (7th & 8th Gen) and more

User questions & answers

Question:	Does it come with wall anchors for screws
Answer:	Yes it does, as well as spacers if needed and some double sided tape strips
Question:	Can you suction it to glass as a car windshield
Answer:	I don't think so.
Question:	How flat does this fold with an iPad in it? I don’t want it visible under my cabinet when it’s folded up
Answer:	IT is not completely flat It does stick out a few inches.
Question:	Is it possible to get a replacement part? The ring that hold the tablet holder broke
Answer:	If you are talking about the circular nut that tightens around the ball end of protrusion behind tablet holder then yes! I purchased a 1/2 inch wing nut for faucets from hardware store for under $2. It looks and acts the same as the original part on this device. Just take the original part with you or a picture of part and store employee will help you to get a match.

• ✅Metal flexible Height adjustable holder stand for any size tablet between 7-11" diagonal screen size including IPAD Mini /IPAD Air/ iPad Pro 9.7" or 10.5" (Compatible with ipad Pro 12.9 inch but you need to add some heavy item like unused books on the base ) Integrated round tray for placing smartphone or cup
• ✅Height adjustable from 28 - 60 inch, Convenient to use bedside, sofa side, in office, Gym, treadmill, lecture or musician practice
• ✅ Round cup/phone tray integrated to place smartphone, cup, soda can, etc conveniently
• ✅Holder turns 360 degree and the flexible neck will allow you the best viewing angle
• ✅Metal round base with skid resistant pad in the bottom, easy to move it around

Product description

The Macally MCUPTABPRO is a fully adjustable car cup mount that allows you to use your iPad or tablet for navigation and to entertain passengers. The holder fits any Apple or Android tablets as well as iPhones or Android smartphones that are between (3.5 inches) and (8 inches) wide (with or without a protective case). The soft cushioning on the holder provides a secure grip and protects your smart device from scratches. The extra-long & upgraded 12-inch adjustable neck and 360-degree rotatable holder, bring your tablet within easy reach and offer the best viewing angle.



IT’S PERSONAL:

Bzz! Bzz! Bzz! You are driving home from work, your partner is calling you; however, merging into a bottlenecked freeway with fatigued and frustrated drivers who barely provide space for your car, you anxiously attempt to jam your hand down the side of the seat and reach for your cellphone. Why do we do this? Why not just buy a cost effective, trustworthy phone cradle to make such an annoying problem go away? I mean with prime members, you can have Macally products in just a day or two and lessen the likelihood of a car accident and extra unneeded stress. We encourage you to join the Macally cause to simplify your life and control your cluttered electronics, not the other way around.



IMPORTANT FEATURES:

* Release Button: For easy removal for your electronic device

* Cup Holder Compatibility: Expandable base fits pocket width of 2.5" to 4"

* Mobile Device Compatibility: Width must be between (3.5 inches) and (8 inches) (with or without the case)

* Works with tablet or phone cases

* Rotatable 360 degree swivel holder

* Fully adjustable and extendable 12 inch arm



VERY IMPORTANT (See state regulations/laws for windshield mounting)

When using this product, please read all safety and operating instructions and observe all warnings provided in the manual supplied in the packaging. If you have any questions or concerns, please feel free to contact the Macally customer service department for ANY questions (the contact information is also supplied within the package).



WORRY-FREE WARRANTY:

At Macally, we believe in our products. That's why we back them all with a one-year warranty and provide friendly, easy-to-reach support for any of your questions.

• 🚘 MUST HAVE DRIVING COMPANION: Our tablet holder for car combines convenience, practicality, and most importantly safety. You will be able keep your eyes on the road while enjoying both easy access and an unobstructed view of your phone or tablet.
• 👁 ACHIEVE THE OPTIMUM VIEWING ANGLE: Adjustability is plentiful with the car tablet holder. With a 12” flexible gooseneck and a 360° rotating base you will be able to set your device to any viewing angle you desire, regardless of where you are seated.
• 💪 SECURE AND STURDY BASE: Designed to offer a stable viewing experience, our iPad car holder securely mounts to any cup holder between 2.5” - 4” which can be found in most vehicles. Perfect for backseat entertainment if there are cup holders in the rear.
• 📱 UNIVERSAL MULTI-DEVICE COMPATIBILITY: Our car cup phone holder supports a wide range of devices between 3.5” and 8” wide! That means you can enjoy a hands-free experience for almost every smartphone or tablet.
• 📦 WHAT IS INCLUDED: Your satisfaction is our top priority. Along with an easy to use tablet mount that will make your drive more pleasurable, you will also receive our hassle-free return policy and LIFETIME SUPPORT.

User questions & answers

Question:	Will it fit garmin drivesmart 61lmt-s
Answer:	It is adjustable to fit any device 3 1/2 to 8 inches wide, so measure the width of your device to be sure.
Question:	what is the difference between the 2 versions of this item
Answer:	This version the neck is flexible where in the other version the neck is fixed and shorter. In doing the job desired it depends on your requirements.
Question:	does this fit well with I phone in a otter case
Answer:	Yes. I have a s8+ and it fits in the clamp both directions. It does open up very wide and the base is sturdy. This has been one of my favorite car phone holders.
Question:	Anyone tried this with car seat cup holders
Answer:	whats a car seat cup holder? like a childs car seat?

Product features

Diverse Usage For Any Occasion

Whether your children are watching videos via the back seat console or maybe you are sitting at home reading the news in your recliner (with a cupholder), this tablet mount will be your favorite sidekick to accompany your digital lifestyle.

Strong Cup Holder Insert (No Tools Needed)

Easy tightening & loosening mechanism allows you to easily twist and adjust to any cup holder size that is 2.5" to 4" in diameter. And once the base support is properly installed it not come loose.

Strong Cup Holder Insert (No TDiverse Usage For Any Occasion)

- Fits any device within 3.5 to 8 inches (wide). - 2 vertical lengtheners (arms). - 2 horizontal feet adjusters. - Quick Release Button. - Maneuvers 360° for the perfect viewpoint.

Product description

The Macally MCUPPRO is an adjustable car cup holder mount for tablets like the iPad or smartphones (e.g. iPhone or Samsung Galaxy etc.) (with or without a protective case). For effective fitting, your device should be between 3.5 inches and 8 inches in width. The soft cushioning on the holder provides extra grip and protects your smart or cellular device from scratching. The Macally MCUPPRO has a 10-inch neck with a 360-degree rotatable holder for the best viewing angle. The adjustable base of the Macally MCUPPRO fits perfectly in the cup holder of most cars.

• ENHANCED DRIVING EXPERIENCE: Our tablet holder for car is a must have roadside companion! It offers a comfortable hands free viewing experience that will allow you to focus more on the road and less time fumbling with your tablet or phone.
• MULTI-DEVICE COMPATIBILITY: Regardless of device you choose to take with you on your drive, you are covered. It doubles as both a car tablet holder and a car phone holder so you can easily mount any device between 3.5” - 8” with or without case.
• YOUR PREFERRED ADJUSTABILITY: Set your phone or tablet to your desired viewing angle to where it's easily reachable and perfectly in view. The ipad holder for car has a long tilt-able neck, 360° rotatable base, and 360° rotatable mount.
• STABLE AND SECURE: The tablet car mount easily fits a wide range of cup holders. It will securely mount onto cup holders between 2.5” - 4” which can be found in most cars, suvs, trucks, boats, and even sofas or massage chairs.
• WHAT IS INCLUDED: We strive for excellence with our products and our customer service. The ipad holder for car will come with a 1 year warranty, easy to reach LIFETIME SUPPORT, and if for any reason you are not satisfied, hassle-free returns.

User questions & answers

Question:	Will this hold a tom tom gps
Answer:	It holds my iPad and iPhone easily
Question:	Can I move the top arm so it angles down, instead of up, to shorten the overall height of the mount
Answer:	Possibly. The arm that holds the device is attached to the vertical support at the top but moves/swings between the two uprights. The arm holding the device(tablet or phone) is attached at the top of the two vertical supports and moves between these two vertical supports. This arm can be moved from side to side and the clamping device for the tablet or phone is attached to this arm. Which the clamping device can then be rotated for the device(Tablet or phone) to be placed in a vertical or horizontal(Landscape) mode. This arm can then be moved in a motion that angles your device (phone or tablet) into the proper viewing angle which could change the overall height of your mount. So, the minimum height of the mount (the two vertical supports cannot be changed but you can make your device taller or the same height as the two vertical supports by moving the arm that holds the clamping attachment, thus moving the tablet or phone above the vertical support.
Question:	What does the warranty cover
Answer:	Hi Vicki, Our warranty covers all parts for 1 year from the date of purchase.
Question:	Does it hold iPad with case
Answer:	My iPad is in a case and the car mount device works well

Product features

Collapsible Neck

- Adjust the angling.

- Maximize the height to 10".

- Flip down to lower just above the cup holder.

Fits Inside Most Cup Holders

- No tools needed.

- Easy tightening & loosening mechanism.

- Twist to adjust to almost any cup holder size.

The Universal Cradle

- Fits any device within 3.5 to 7 inches (wide).

- 2 vertical lengtheners (arms).

- 2 horizontal feet adjusters.