14 best holder for cars

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• 【FAST WIRELESS CAR CHARGER 】Made with latest standard and built-in lastest smart chip, The 3rd generation reinforced copper coils is a core for fast charging compare to standard wireless car charger mount. This car phone mount wireless charger can provide overcurrent, overheat, over-voltage, and short circuit protection to ensure charging safety.
• 【SUPERIOR MATERIAL】This car wireless charger uses environmentally friendly ABS material shell and quality mirror panel. It's very durable.
• 【AUTO CLAMPING CAR HOLDER】Built-in powerful motor provides the perfect clamping force to automatically lock your smartphone into a non-slip silicone pad base and hold the phone firmly even on rough roads.
• 【QI WIRELESS COMPATION FUNCTION】This car wireless charger works with all Qi-enabled phone. Compatible with iPhone X/XR/Xs/Xs Max/8/8 Plus,Samsung S6 edge / Note 8 / Note 9 & later ect
• 【TWO INSTALLATION METHODS】The car mount can be installed on the vehicle’s dashboard And air vent with the included suction cup base and air vent clip. The strong suction cup base with sticky gel and anti-shake stabilizer keeps the mount securely on the dashboard without wobbling.

User questions & answers

Question:	Will motor break if opened or closed manually
Answer:	I would think so.. Seems like plastic gears that could break easily.
Question:	Wire length
Answer:	The length of the charging cable is 1 meter
Question:	I have a samsung galaxy s8 plus with a otterbox defender case. does it fit and charge
Answer:	Hello there! Need to remove the protective cover. Thank you for your support to YITUMU! happy shopping! The thickness of the phone case must be less than 6MM
Question:	What type of usb cable does this use? The one included is not long enough
Answer:	The Type-C USB cable is used, the length is 1M.

Product features

YITUMU Fast Charging Wireless Car Charger It's not only a qi wireless car charger but a phone holder.

2-in-1 design will help you to end the chaos of cable and resolve your panic of low cellphone power when frequently using GPS navigator, voice call, or listening to music on the road.Only one hand operation, no need to remove phone case while charging.

Compatible Phone Model (Only Works with Qi-Enabled Phones)

●QC2.0 or 3.0 car charger adapter is required for fast charging, which is not included.

✔10W fast charging for Samsung Galaxy S10+/S10e/S10/S9+/S9/S8/S8+/S7+/S7/S6/S6+/S6 edge/Note 8/Note 9 & later;、

✔7.5W fast charging for iPhone 8/8 Plus/X/Xs/Xs MAX/XR;

✔5W standard charging for Google Nexus 4/5/6/7; Sony Xperia Z3v/ Z4v; Huawei MateS/20pro/20; Other device with Qi-Enabled.

Sticky suction pad

Smart sensor

Adopts the 3rd generation Upgraded superstrong copper coils, charging time 50% faster than other wireless car charger, charging range 40% larger than standard wireless car charger mount. Up to 10W fast charging consistently outperforms another wireless car charger.

Actively Lock the mobile phone

Automatic opening and clamping design can be operated with one hand. Just place your phone inside the holder, the clamps will close and provide a strong stable hold. A gentle touch on any sides of the quick release buttons,the arms would automatically open. The arm clamp can be flexibly adjusted for 4.7 ~ 6.3 inches devices.Compared with the gravity bracket, the mobile phone is more firmly grasped.

Strong adsorption of the suction cup

The bottom is washable suction cup and pad. Rinsing and air drying the suction cup and pad after using for a long time can restore their stickiness. We do not recommend to apply the suction cup on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction.

We suggest you use in irregular surface of the dashboard , and then press the suction cup on the pad to ensure the STABILITY. Make Sure Press the Swtich Lock of suction Cup.

Flexible Extensible Foot

For better compatibility with more different sizes of mobile phones, we designed the extensible foot. Easily adjust it to the right place according to the size of your phone.

Horizontal and vertical screens are applicable.Satisfy different perspectives.

Solve the problem that gravity bracket can only vertical screen.

Satisfy different perspectives.

Easy to Install

Easy to Install

Step1: Put on the nut.

Step2: Mounting nut and clip.

Step3: Tighten the nut.

Step3: Complete the assembly.

Package Contents

This car wireless charger can be mounted on various air vent stably.

Package Contents:

1 x Wireless Car Charger Mount

1 x Type-C cable

1 x Air Vent Stent

1 x Strong Dashboard Mount

1 x User manual

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

• Multi-function Dashboard Phone Car Holder: Placed on the dashboard of the car, it will not block your driving sight and you can operate the device without lowering your head. Apply to most of cars,trucks,SUV,trucks.This holder will keep the phone stable make sure safe driving even if turning,braking or driving on bumpy road.
• Upgrade Holder: The bottom of the phone holder for car dashboard adopts the advanced adhesive material to ensure firm adsorption without leaving any traces. it can still be reused once it is washed with water. There is a soft silicone pad on the bracket to protect the phone from impact and scratches during emergency braking and sharp turns.
• Universal Compatibility: Car phone mount suits for various devices（4-7.2 inch）that width maximun 3.5 inch(9cm) Universal compatible for smartphone such as,iPhone 12 Pro Max/11/11 Pro MAX/X/XR/XS Max case, Samsung Galaxy S20/S20 Plus/S10/S10 Plus/S9/S9 Plus/Note 20 10,for different smartphone devices.
• One Hand Operation: Car mount bring you convenient experience when you driving the car. it can be put to dashboard without any instrument, you can put your mobile phone on the car mount, answer and operate the mobile phone with one hand, making your driving safer.
• Safety & Guarantee: We are aimed at offering you a perfect shopping experience.If there's any problem with your purchase, you could contract us directly and we will provide a satisfied solution for you within 24 hours.We hope to bring customers relaxing comfortable life experience.

User questions & answers

Question:	Does the holder obstruct the phone's camera? I want a holder that will let me record dashcam video using my phone
Answer:	It depends on your phone size and where the camera is located. I think for most of the phones you can adjust it in away to not block the camera. You should push the phone a little bit to the right or left.
Question:	can i charge my smartphone while driving
Answer:	Yes, you can plug the charger cable to the phone when the phone in the holder.
Question:	Will this cell phone car mount shake while going at bumpy road
Answer:	my phone stay well at the car phone holder .
Question:	my holder seem not to stick any more. Is there somewhere to buy a new pad
Answer:	I would reccomend you use warm water wash it, letting it air dry and then giving it a good hard placement on the surface of your liking.

Product features

RAXFLY Anti-Slip Silicone Suction Pad Dashboard Cell Phone Holder for Car

1. Remove the transparent film on the bottom.
2. Place the holder on a flat surface.
3. Open up the clamp and put your phone in.
4. Adjust to the angle you need.

Stable Structure

Adopts the advanced adhesive material to ensure firm adsorption without leaving any traces.

Washable Suction

Phone holder can still be reused once it is washed with water.

Compatibility Any Size Phone

Car phone mount suits for various devices（4-7.2 inch）that width maximun 3.5 inch(9cm).

Compatible With

Car phone mount suits for various devices（4-7.2 inch）that width maximun 3.5 inch (9cm)

• Compatible with iPhone 11 11 Pro Max X XR XS Max 8 7 6 6s Plus Case
• Compatible with Samsung Galaxy S20 S10 S9 S8 Plus S7 Edge Plus Note 20 9 10 Ultra
• Compatible with LG, Google, Moto, Sony, Nokia, Huawei, GPS Devices
• We recommend using car mount holder for cell smartphone with Slim case Otterbox case

• 【Super Sticky Gel Pad】Attach to windshield, dashboard or most smooth flat surfaces. They will not fall off even in turns, bumps or when the speed too fast. The car mount can be restored to its mint condition by rinsing it with warm water and allowing it to air dry.
• 【How to Use the Suction】Keep clean where you install the phone mount. Open the lock lever before using, press the base until there is no air gap between the base and the suction,then lock the button, rather than stick directly to the dashboard or windshield.(Note: try to avoid direct exposure to the sun.)
• 【Telescopic Arm】 Adjustable telescopic arm accommodates desired length up to 6.3 inches, you can adjust the distance as your wish.
• 【360°Rotations & Adjustable Height】Swivel ball head allows 360°free rotations to your desired viewing angle. The adjustable Fixed switch helps you adjust the car mount to the perfect height.
• 【Warning】Due to the flexible nature of the gel, some discoloration or residue may be left depending on the type of surface that it is mounted on. Please note, most likely will not work on leather/ vinyl dashboards.

User questions & answers

Question:	I have a cool pad will it fit it and hold it in place Like it should
Answer:	It actually holds my iPhone XS Max very well.
Question:	Is this product heavy duty? What material did they use
Answer:	Not sure of material. It's a heavy duty plastic. Not flimsy at all. We use it in a sedan on the windshield with the shortest extension (best strength) for a iPhoneX with thin case and credit card holder (a little more weight and size). It's been holding every day for months.
Question:	Will this hold the galaxy S
Answer:	sure. Very nice product! I would like to recommend a good product working very well together with your phone and this holder product: ✅Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter ✅
Question:	How do I attach the two pieces together? Pushing them together doesn’t work
Answer:	Mine will not attach either. The 2 parts are not matched. The ball on the arm is 14mm dia but should be at least 16mm

• 【2020 Latest Design-Never Fall Off】Miracase car phone mount adopts 2020 latest fall-proof locking design which holds your phone securely to the vent. The clip hook will catch one of the car air vent blades. The spring-clip plate and the tightening nut will provide absolute fixation. This car phone holder has stable trapezoid-structure clamps with thickened shockproof sponge and rubber, which could hold the phone steadier than others. It will never fall out like other products no matter how bumpy
• 【Universal Compatibility】Miracase car cell phone holder has an adjustable mount which makes it widely compatible with smartphones or electronic devices from 4.5 to 6.5 inches(width size from 2.1-4.05 inch),such as iPhone 11 Pro Max / 11 Pro / 11 / XS MAX /XS/XR/X/8/8 Plus/7/7 Plus/6s/6 Plus. Also compatible with Samsung Galaxy Note 10 / Note 10+ /S10/S10+/S9 / S8 / S8+ / S7 / S7 Edge / LG Google etc.
• 【360 Degree Adjustable View Angle】The 360-degree rotatable head will provide you with the best viewing angle, so you could see the phone screen clearly and keep secure driving rather than limited by view angle or unwieldy phone holder for car. You can place your phone in any orientation(horizontal, vertical and more), it is easy to ensure driving security with this handsfree air vent phone holder for car. Just enjoy the best driving experience.
• 【Single-handed Operation】With quick-release button and adjustable clamp arms, Miracase car air vent phone holder makes it very easy to insert and remove your phone with a single hand. Provide you with safer driving whether you are talking, navigating, listening to music or charging.

Product features

Miracase Car Phone Mount-2021 Upgraded Version

Miracase Phone Holder for Car

2021 Upgraded Vent Clips:

Miracase car phone holder adopts 2020 latest design, it will never fall off even on bumpy off-road roads.

Great Choice for Decent Present:

Unique design inspiration makes it stand out,it's a great holiday gift for family and friends.

Installation Instructions

1. Unscrew the screw nut 1, place it onto the ball head.
2. Insert the ball head into the socket of clamp head until you hear a "click".
3. Tighten the screw nut 1.The tighter the nut, the harder it is to rotate the clamp head.
4. Loosen the screw nut 2 until it attaches to the screw nut 1.
5. Make the clip hook downward and pull open the clip plate,push the hook into the air vent grille to catch a blade,then release the spring clip plate to make it fix to the air vent.
6. Make sure the product is already installed stably,then tighten the screw nut 2.Installation complete!!

Note:

• Don't install the product on the blade at the top or bottom.
• Remember to never text while driving.

• [Multi-function Cell Phone Holder] 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. One small car mount or car vent mount feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Stable and Safe Car Phone Mount] Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.
• [True Universal Cell Phone Holder for Car] Super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. It is compatible with iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360 Degrees Rotation Car Cell Phone Mount] The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. Find a best view for your trip. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of jobs for you.
• [One Hand Operation Phone Car Mount] After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Release your smart phone by pressing the left bottom release button in one second. VICSEED smartphone car mount gives you an easy and safe driving journey.

Product features

Adjustable Foot

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our car mount can hold your big phone better fit.

Thick Case Friendly

The depth of the holder is 0.67''. VICSEED phone mount fits small or thin phones perfectly. It also fits for thick or large phones, and with super thick cases. No need to take off phone cases any more. Just drop your phone in it, it will do the rest of job for you.

Reserve Charging Port

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Strong Clamp Power - Fit for All 4.5'' - 7'' Phones

• STABLE "HOOK SHAPE" CLAMP：This car phone holder mount is designed as an innovative hook clamp, which is locked on the air outlet blade by a knob. The strength of the knob is adjustable, so it solves the common problem of mounts being easy to fall off over time and does not produce any noise when the car is running.
• 360 DEGREE ROTATABLE STAND：The 360 degree rotatable stand makes it easy to find the most suitable position. It solves the problem of blocking the air outlet and keeps your sight level higher and safer.
• LOCK YOUR PHONE FIRMLY: This is a magnetic phone car mount with 6 built-in strong magnets, and it bears up to 7lb of weight. The powerful suction keep your cellphone stay stably even when drive on a bumpy road.
• EASY INSTALLATION: This magnetic phone car mount benefits from the special design of the clamp, this vent phone holder is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet.
• WHAT IS INCLUDED: 1*Kaistyle magnetic phone car mount, 1*Round metal Pad, 1*Rectangular metal Pad, 1*Round PE Film , 1*Rectangular PE Film. TIPS：It is recommended to paste the metal Pad inside your phone case (not recommended for the plush material case).

• 【More Stable & Secure Hold】 Join the 5,000,000 customers’ choice provided by Andobil and enjoy hassle-free leading service. Andobil listens to customers' appeal for "stable and secure" car phone mount, that's the birth of 3rd generation Andobil car phone holder. 2 upgraded mount clips solving compatibility issues for air vent in different cars, and newly equilateral mechanical structure brings solution for bumpy roads, sharp turn, fast driving, etc.
• 【Innovative "PTFE" Material】3X more stable and secure with upgraded PTFE material, solves many customers feedback for "crack phone mount' and "temperature withstanding". This Andobil air vent phone mount can be used in extremely harsh environments (withstand temperature -40~194℉) without worrying its quality, effectively avoid melting deforming in hot and breaking off in cold.
• 【Newest "Quick Release" Design】More convenient and easier operation with new "Quick Release" button, comparing with other "One-hand operation" car phone mount, Andobil air vent car phone mount brings you 0.1s-releasing and quick locking. What's more, Andobil car phone cradle can withstand more than 20,000 times open & close by repeated tests.
• 【360° Flexible Rotation】Best viewing angle when driving with this air vent car phone mount, it is designed with 360° swivel ball joint, you can adjust your phone with single hand for a horizontal, vertical or more layout for navigating, phone talking, music listening, etc, optimizing the perfect angle & position and offering safe driving experience.
• 【Universal Compatibility】Andobil phone holder cradle for air vent is compatible with all cell phones from 4" to 7", specially designed adjustable foot can be adjusted for different size and shape, perfect for iPhone 12, 11, X, XR, SE, 7, 6, Samsung S20, S10, Note 10, Moto G, Google Pixel, Huawei P30, Nokia, Xiaomi, OnePlus, etc.

Product features

More Than 5,000,000 Customers' Choice All Over the World!

This Andobil car phone holder is the latest version after collecting feedback from the markets, After 3,000 tests and redesign, we've improved it to the best version ever. Comparing with the old version and other brands, it brings more convenience and better driving experience!

• With the 0.1-sec quick release button, you can mount or remove the phone faster and more smoothly.
• With additional car vent mount clips, it solves compatibility issues with different cars, SUV, trucks, etc.
• Horizontal or vertical, closer or further. This flexible motion allows free 360°-rotation reach to your mobile.
• Versatile for different cellphones and cars in the market. Start to add some intelligence to your drive.

Suitable for most vehicles, e.g. Ford, Vauxhall, Nissan, Toyota, Honda, VW Passat. Mercedes-Benz, BMW, Audi, Skoda, Kia, Peugeot, Land Rover, etc.

The goal of this car phone holder is:To securely hold your phone in place, while you just keep focused on the road.

Upgraded Metal Clips Brings More Security.

--►3-level Protection--

Twist lock design, you can screw it to make sure the clips firmly clip on air vent;

Bottom lock design, makes this clip be attached to bottom firmly on bumpy roads;

Unique anti-slip design, so that this car vent mount will not slide when driving.

--►Upgraded Metal Clips--

Good Combination or PTFE and metal, brings you more sturdy clips than ever;

PTFE has good feature of temperature resistance, and 5X more durable than plastic;

Metal clips structure inside ensure it will not crack after long time use.

Andobil Air Vent Car Phone Mount, Bring Each Drivers Awesome Experience!

• Upgraded Clip Design: Andobil improve both structures and materials for mount clips after hearing many feedback for a better mounting clamps;
• Patented Stable Structure: Andobil design this unique structure, which accords mechanics and ergonomics, bringing your cell phone more security and more convenient to operate;
• 0.1s Release Button: Say goodbye to laborious releasing methods with 2 hands, Andobil car phone mount is designed with a magic button for releasing your phone in 0.1s.

Soft Rubber Protector

Each contact point with your cell phone of this car mount is designed with soft rubber protector, forming a buffer zone to avoid scratching your device.

360° Flexible Rotation

Adjust this car phone mount with ease for its 360° joint ball design, easy to set a horizontal, vertical or more layout for navigating, phone talking, music listening, etc.

Special Designed Charging Port

Considering our customers could charge device when driving, we leave a 16 mm charging port on the lower end of this cell phone mount, ensuring your phone can be mounted charging.

Does it support all cell phone models?

This car phone mount fits most phones from 4” to 7”.

►Compatible with iPhone 12/ 12 Pro/ Mini/ 11/ 11 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS max/ XS/ XR/ 7 Plus/ 7,

►Compatible Samsung Galaxy S20 Ultra/ S20+/ S20/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 10/ Note 9/ Note 8,

►Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

►Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

►Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.