13 best car phones

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• 100% Designed, Engineered, and Manufactured in the USA by WeatherTech!
• Designed using interchangeable base cups allowing you to customize the perfect snug fit.
• The adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases.
• Base allows phone to rotate 360°, adjustable for viewing from any seat position.
• Open access bottom lets you easily charge your mobile device while it is in place.

User questions & answers

Question:	Will this fit a 328i series BMW sedan
Answer:	There are 4 size cups I’m assuming it will fit a BMW I have a Chevy &we have a Lincoln SUV & they fit perfectly try it U can always send it back if it doesn’t work
Question:	This product does not fit my car cup holder. Where does the description say I have to pay return shipping costs
Answer:	When initiating the return, select "item not as described" as the reason (this is described to fit all cup holders -- it does not! (mine included)). This typically generates a no-cost return label.
Question:	Will this fit for iPhone 8 Plus
Answer:	hmm I'm not sure exactly, but it fits the 5c, the 5 s, the 8 with otter case and the 11. I have had no problems with the cup sizes for these sizes.
Question:	Why are you charging $7 more than Weathertech for the same cupfone and saying free shipping to prime members while Weathertech charges less
Answer:	I looked on Weather Tech's website.....it appears that the $34.95 + $8.00 ground shipping adds up to the $42.95 that is advertised by this vendor.......ends up costing the same......you will probably end up getting it earlier than when ordering directly from Weather Tech

Product features

Safer hands free driving

CupFone is a mobile phone holder that sits conveniently in any vehicle’s cup-holder. Fully adjustable tilt and rotation allows you to easily see your favorite app like Navigation or Waze when on the road. Convenient cut-out allows for charging on the go!

Adjustable

Easily adjusts to accommodate your cell phone with a single easy-to-turn knob. Once adjusted your phone slides in and out with easy, no springs or magnets.

• Regular CupFone fits most phones and cases, up to 3.375" wide
• CupFone XL fits large phones with thick cases, up to 4.11" wide

A second easy-to-turn knob allows rotating for the perfect viewing angle.

Find Your Fit

Interchangeable base cups allowing you to find the perfect snug fit for your vehicle's cup-holders. Each base cup features a whole in the bottom which allows the included tool to separate with ease.

Just 'click' together the cups you need and store the others for use in rental cars, golf carts or any other cup holder!

On The Go

Fits virtually any cup-holder so you can take with you in your truck, utility-vehicle, lawn mower, golf cart, boat or RV. You never have to search for your mobile phone again, because you always know where it is.

• Maps & hands free navigation while driving your car, truck or SUV
• GPS and score card while golfing
• Secure your phone while working

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Smooth Contact: The phone cradle is padded with soft silicone to avoid scratches to your smartphone or other device
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle
• Wide Compatibility: Compatible with smartphones between 4” and 6.5” in screen size
• Package Contents: AUKEY HD-C50 Dashboard Phone Mount, Sticker Base

User questions & answers

Question:	Will this hold a phone with a popsocket
Answer:	Very nice product. Frequently bought together and well works with 🌈🌈 Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter. High-end Car Music Player 🌈🌈
Question:	Is it adjustable for different angle
Answer:	It's adjustable in all directions,you can attach it on dashboard or windshield.
Question:	I bought a new phone, iphone 11, will this fit my phone
Answer:	Of course. I also have the iphone 11 and this holder works well with my phone
Question:	Does this holder interfere with the button on the side of my phone
Answer:	NO,the grips on both sides are clamped to a third of the phone,it dosen’t interfere with the button.

Product features

Quick Start Guide

Adjust the phone cradle so it grips your phone. To ensure secure mounting, press the back edge of the arm (not the front edge).

Quick Start Guide

Lift the mount locking lever up towards the mount arm, then adhere the mount to the sticker base.

Quick Start Guide

Press down the lever. The mount should now firmly grip the adhesive base.

Quick Start Guide

Adjust the the arm to find your desirable angle.

New placement & safer driving

Lower your mount to a open up your view, it is what we highly recommend.This will significantly improve your driving experience and safety.

Ultra sticky adhesion

Made from silica gel, the pad is ultra adhesive and can clamp your phone steadily.

360 degree rotation

360 degree rotation of the ball head. Easily achieve any angle you want.

• Upgraded Vent Clip: Features a stronger, larger vent clip and an innovative support frame to provide extra support, it can hold your phone securely on an air vent in your car
• Upgraded Phone Cradle: Design with a larger cradle to keep your phone stable in place. With the instant release button, you can push the phone cradle arms in to secure your phone and press the button to release
• Ideal Viewing Angle: A 360° rotating and pivoting ball joint allows you to adjust and quickly switch between portrait and landscape view
• Adaptable Attachment: Features a 3-levels locking knob to easily and firmly fix the air vent mounting grip on your car air vent
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold my Galaxy S
Answer:	It can be used on any phone smaller than 6.5 inches, so it can definitely be used on your Galaxy S8
Question:	How many magnetic plates come with the product
Answer:	There are two magnetic plates.
Question:	will this work with a small phone like the original iPhone SE, or new iPhone 12 mini
Answer:	It worked . ihave iphone 12
Question:	Can I remove placement and place somewhere else
Answer:	Yes, you can remove the holder to wherever you want to set. The viscose of the pedestal could be reused after you wash it by warm water.

Product features

AUKEY Car Phone Mount

• Upgraded Stronger Air Vent Hook Clip, flexible fit to attach to thicker or thinner air vents.
• Firmly holds your smartphone or GPS.
• 360-degree rotation for the ideal viewing angle.
• One-button phone release.
• High-quality materials and finish.

The phone cradle release button has been relocated to the top at the back for easier access and smoother phone retrieval. The phone cradle has also been improved to hold your phone firmly even on the most bumpy roads.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint.

Upgraded Stronger Air Vent Hook Clip

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Adjustable Phone Rest

Extends to fit bigger phones. Four positions to choose from.

Keep Your Case On

Fits regular phone cases too.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Upgraded Mount

With a larger cradle and stronger grip, it can hold your phone firmly in place even for a big one.

Step 1

Flip the grip release knob to the widest air vent mounting grip gap. Clip the mount on your car’s air vent and then flip the grip release knob to to lock.

Step 2

Press the phone cradle release button and adjust the phone rest so that your phone is positioned at the right height in the mount.

Step 3 Press the BACK EDGE

Press the BACK EDGE of the cradle arm tips to push the phone cradle arms back in, so they grip your phone securely.

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

• 【Easy Operation】The car phone mount with one-click system that enables you to release or lock your phone with just one hand and the swivel ball allows the clamp 360°free rotations to your desired viewing angle.
• 【How to use the Suction Pad】Keep clean where you install the phone mount. Open the lock lever before using, you should press the base until there is no air gap between the base and the suction,then lock the lock lever, rather than to stick directly to the dashboard or windshield.
• 【Perfect Protection】The phone holder for car also with an adjustable supporting foot that you can up and down it, which hold your phone more stable. And the protection silicone pad on the side arms and supporting foot will ensure your mobile device is safe from wear and tear.
• 【Extreme Flexibility】This car phone holder with adjustable telescopic neck can extend from 5.1- 7.48 inch and pivots on 225 degree arc for a variety of optimal positions as you need. If you have any questions, don't hesitate to contact us!
• 【Warning】Due to the flexible nature of the gel, some discoloration or residue may be left depending on the type of surface that it is mounted on. Please note, most likely will not work on leather/ vinyl dashboards.

User questions & answers

Question:	Will it fit an lg cell phone
Answer:	Yes, any standard size because you adjust the sides to fit
Question:	How do you release the phone? And how wide it can extend
Answer:	Our Phone Holder for Car with one-click system that enables you to release or lock your phone with just one hand. To release the clamp by pressing the lever，put your phone in and your phone will touch the button on the back, then the arms will be locked automatically and hold your phone tightly. To release the phone， you just yank your phone out, it is convenient but no harmful，because the clamp side is cover with protection silicone pad. The clamp can extend from 2.36'' to 3.54'', this car phone mount is compatible with 4.7'' to 6.8'' phones. Any questions，feel free to contact us.
Question:	Will it stick on a textured dashboard
Answer:	Stick on the smooth surfaces or windshield will be better. Keep clean where you install it. The suction can be washed with warm water to reuse . The button should be opened before installing, the suction worked by operating the button rather than stick to the dashboard or windshield directly, so be sure press the base until there is no air gap between the base and the suction, then lock the button tightly.
Question:	How can I make the suction cup work better
Answer:	Keep clean where you install the car phone holder. The lock button should be opened before installing, the suction worked by operating the button rather than stick to the dashboard or windshield directly, so be sure to press the base until there is no air gap between the base and the suction, then lock the button tightly. And the suction can be washed with warm water and air dry to reuse . Any questions,please feel free to contact us.

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.

• [ Grandmaster Easy Clamp Design, Patented Structure ] VANMASS design the Industry-leading easy clamp which has won 2 patents in EUIPO to achieve quick clamping & release. Press the left button to open the arms and then squeeze two arms to clamp the phone. Super easy to use during your drive. Better than other hard silicone pad, our air capsule silicone on the inside clamps make the phone bear the collision even without the phone case
• [ Multi-function Phone Holder, Best Mate Anywhere ] Equipped with the suction cup and air vent clip, you could mount the car phone holder to your car’s air vent, dashboard, windshield, and even bathtub, desk. moreover, apply to most of the cars, pickup trucks, SUVs, trucks, taxis; good assistant for Uber, Lyft drivers. The 360-degree swivel head allows you to rotate the phone for portrait, landscape view. The telescopic arm could be pivoting up and down 270°and extending it from 5.26" to 9.81"
• [ Multiple Original Advantages, Max Protection to Phone & Car ] VANMASS car phone holder is the industry-first one that adapts the aviation material “PTFE” (not cheap plastic), so it could work well in extremely harsh environments. Moreover, we offer a 3X suction power than other suction cups which can hold the phone steady even on a bumpy road. In addition, the original nano-steel vent clip grips tightly on the air vent without any shaking
• [ Better User Experience, Phone Companion ] VANMASS optimizes every detail of cell phone mount and is appreciated by many users worldwide. The first ergonomic fingerprint design on both clamps allows you to squeeze the arms to hold your phone firmly; The first adjustable foot could be compatible with all mobile phones, such as iPhone SE 12 11 Pro Max XR XS Max X 8Plus 7Plus, Samsung Galaxy S21 S20 S10 S9 S8 S7 Note 20 10 9 8, LG, Google, Sony, Nokia, etc
• [ Luxury Present: High Notch Configuration & Exquisite Package ] VANMASS car phone mount is fully protected in an elegant & eco-friendly box. Comes with 1x car phone mount, 1x suction cup, 1x air vent clip, 1x user manual, and 1x sticky gel pad (Please note the sticky pad is for one-time use and textured or uneven dashboard only).

Product features

Ergonomic Design, Quick Release

• Just a simple touch to mount or remove your phone within seconds. Simply click the button on the left and your cell phone will be released from the bracket.

Shock-absorbing Air Capsule Silicone

• Better than other hard silicone pad, we adapts air capsule silicone on the inside clamps make the phone bear the collision even without the phone case.

Adjustable Foot

• Better than other fixed foot, we design the adjustable foot (0.78 inch) which could hold your big phone better.

Stainless Steel Structure - Last Forever

• Different from other easy-to-wearing iron screws, this mount uses the stainless steel screw to be incredibly solid & steady, tested under extreme 10Hz super high vibration frequency for 26,000 hours.

Package Content

We includes all your need:

• 1x car phone mount
• 1x vent clip 3-level
• 1x retractable suction cup
• 1x user manual
• 1x sticky gel pad (just for textured & uneven dashboard)

Exquisite Gift Package

VANMASS cell phone car mount is the best gift for your lover, family, and friends to achieve safe and convenient driving.

Original & Reliable Structure

• 5 years of experience in the field of mobile phone holders, 158 times structure optimization brings you the best car phone mount.
• The first car phone mount adapts the aviation material “PTFE” (others: cheap plastic), so it could work well in extremely harsh environments (-40℉-194℉).

Big Screen Fans & Mini Phone Lovers, All (4-7inch) Suitable except Samsung Galaxy Fold/Z Flip series

• - All iPhone: Compatible with iPhone 12 mini / 12 Pro / 12 Pro Max / 12 / 11 Pro / 11 Pro Max / 11 / SE (2nd Gen) / X/XS / XS Max / XR / 8 Plus/7 Plus / 8/7 / 6 Plus/6s Plus / 6/6s / 5/5s/SE (1st Gen)
• - All Samsung: Compatible with Galaxy S21 Ultra / S21+ / S21/ S20 Ultra / S20+ / S20 / Note20 Ultra / Note 20 / Note10+ / Note10 / S10+ / S10 / S10e / Note 9 / S9+ / S9 / S8+ / S8 / S7
• - All Pixel: Compatible with Pixel 4 / 4 XL / 3 / 3 XL / 3a / 2 / 2 XL / Pixel XL / Pixel
• - All LG: Compatible with LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ
• - All OnePlus: Compatible with OnePlus 8T / 8 Pro / 8 / 7T Pro / 7T / 7 Pro / 7 / 6T / 6 / 5T / 5
• - All Huawei: Compatible with Huawei P40 Pro / P40 / P30 Pro / P30
• - Moto G7/ Z3, Nokia 7.1/ 6.1, etc
• - Other Universal Fit (4.7” to 7”)

Note: It is NOT recommended for Ring Case.

Before using, please browse the following for optimal experience:

Air Vent Application

• It is recommended to use air clips for horizontal blades, not for vertical, cross, and round air vent.
• If the weather is getting too hot, please use the air vent clip instead.

Suction Cup Application

• Flat & Smooth Dashboard: If the dashboard is flat and smooth, please install the suction cup directly on it. (The dash pad/red sticker is designed to create a flat surface, so unnecessary for a flat dashboard).
• Textured & Uneven Dashboard: The dash pad is for one-time use. Before mounting the suction cup on a Textured or Uneven Dashboard, please press the pad hard for 1min and let the dash pad sit for THREE DAYS to have high stickiness.
• Wash the suction cup regularly: Rinsing and air drying the suction cup and pad after using for a long time can restore their stickiness.
• We do not recommend applying the suction cup on the leather, wall, or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction. In such a case, please install it on the windshield or air vent instead.

Phone Case Application:

• If you use a heavy or duty phone case with the ring, you need to remove the ring from the phone case.
• Please note that the thickness of the phone case’s back should be less than 0.24in. It is not suitable for ring case.