12 best car phone dashboard mounts

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• 【One Car Holder For Multiple Purposes】This clip car mount more convenient, can be used in car dashboard, sun visor, rearview mirror. Multiple purposes can provide you with more convenience and more use needs in the car.
• 【360°Rotation & 180°Tilt】The upgrade car phone mount not only support 360-degree rotatable switch between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle, , so you could see the phone screen clearly and keep secure driving rather than limited by view angle.
• 【Curved Base Design】Made with a soft, non-slip silicon pad and curved base. The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Spring buckle base cannot be shaken off, strong and sturdy.
• 【Folding Car Bracket】When not in use the car phone stand can folds flat and easily fits in a center console, glove box, or door pocket to keep it out of the way, but make you conveniently in reach when you need it.
• 【Broad Compatibility】Designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 6.8 inches, Compatible with iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Moto and More other smartphone.

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

• Versatile Magnetic Phone Mount: This car phone mount safely and quickly secure a mobile device to most flat surface except leather, vinyl and soft surface with the sticky gel on the base of the suction cup. (please use the included vhb dashboard pad if the surface you want to mount is not smooth but textured.) This phone holder for car compatible with all Smartphones for car, home or office.
• Super Solid Suction Cup: Our patented industrial-strength suction cup base provides a strong, secure hold power on the dashboards, windshields, countertops, desks, tables and other surfaces. (Please avoid to expose it to the sun in high temperature for a long time)
• Strong Magnetic Force: 6 powerful magnets hold your devices much more tightly than common magnets. Securely holds your cell phone in place on the dash or windshield even with your car on the bumpy of roads and with the heaviest of smartphones.
• Optimal Viewing Angle: 360 degree rotatable, adjustable and extendable telescopic arm to provide you infinite viewing angle. Innovative ball joint construction allows you to adjust 360 degrees. Telescopic arm can be extended from 4.6”/11.7cm-6.29”/16cm and can up or down for optimal viewing angle. No blind sides. Optimal viewing from almost any angle. No more screw to adjusting, just pull and push to adjust the length. Easy one hand operation!
• Quality Promise and Worry-free - APPS2Car Brand come with lifetime friendly customer service. From APPS2Car: Best Car Mount Designer and Supplier on the market, your phone has never had a better support system in the car!

Product features

QI Wireless Charing Metal Plate

• The APPS2Car Dashboard Mount comes with small round metal plate, specially designed for Qi Wireless Charging.
• Wireless charging phones place charge wirelessly in the middle of the charging pad which leave plenty of space above and below to place a plate which will not interfere.

Heavy Duty & Solid Suction Cup

Easy to Installation:

Place the car mount on the optimum position and then press down the “Lock” lever.

*Note:

- Clean the dashboard or windshield surface thoroughly to remove any dust or debris before installing the car mount.

- If the surface of your car’s dashboard is not smooth, but textured ,please use the adhesive dashboard pad (Please note the vhb adhesive dashboard pad is one-time use) .

-The suction cup may not compatible with the leather, vinyl and soft style dashboard. Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl or soft.

-Magnetic Mount Caution: This magnetic mount is not a toy. The small magnets are harmful if swallowed. Keep away from children.

Package includes:

1 x Suction cup magnetic car phone mount

2 x Metal plate (1 Rectangle,1 Rounded)

1 x Cat Shape Metal Plate

1 x Dashboard Pad

1 x Manual

• Andobil Multifunctional Car Phone Mount: With the latest improved suction cup and vent clip [ stronger & tighter ], this cell phone holder can hold your phone firmly on dashboard windshield or air vent, even on the bumpiest road. Better yet, it comes with a 2-step locking system, which provides more reliable attachment to your car.
• Easy One-Touch Operation: Just a simple touch to mount or remove your phone within seconds - Super easy to use while you drive. It also features an adjustable foot, making this car mount universal for any cell phones up to 7”. Compatible with iPhone/ Samsung Galaxy/ LG/ Pixel, etc.
• Extreme Flexibility: Thanks to the 360-degree swivel head, your phone can be oriented to portrait, landscape, or any angle in between. For added convenience, it has an extendable long arm to keep your phone always in view - And ready for hands free calls, GPS navigation & music streaming.
• Better Design Than Ever: Andobil phone holder for car is made with the most superior ABS plastic and anti-scratch cushion, which ensures full protection of your beloved phone. Moreover, the sturdy arm and stable ball joint can increase its durability. You won't need to worry about your phone falling anymore.
• What You Get: Andobil car phone mount *1, improved suction cup *1, upgraded air vent clip *1, dashboard pad *1, user manual *1. They are fully protected in exquisite package. It will bring an easy and safe driving experience to you and someone you care about.

Product features

Andobil Car Phone Mount

Meet Easy Clamp 2.0 - Andobil car phone mount 2nd generation. After so many tests and redesign, we've improved it to the best version ever. Andobil team has studied all the feedback to make it ideal for your daily drive.

• When it comes to a stronger suction cup, the stickier gel and thickened pad of this holder is all you need.
• With the 1-sec quick release button, you can mount or remove the phone faster and more smoothly.
• Horizontal or vertical, closer or further. This flexible motion allows free reach to your mobile.
• Best 3-in-1 mounting solution for your car. Feel free to use it on the dash, windshield or air vent.
• Versatile for different cellphones and cars in the market. Start to add some intelligence to your drive.

The goal of this car phone holder is simple: To securely hold your phone in place, while you just keep focused on the road.

Adjustable Foot

If your phone is large size, you can pull the foot down. So our phone car mount can hold your big phone better fit.

360° Free Rotation

Full 360° rotation allows limitless possibilities, including landscape and portrait viewing.

Hassle-free Charging

Reserved space for your charging cable. Juice up your phone freely on a road trip.

Best Phone Holder for Car

Does it support all mobile phone models?

This car phone mount fits most phones from 4” to 7”. It’s compatible with iPhone 12/ 12 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS Max/ XS/ XR/ 7 Plus/ 7/ 6s/ SE,

Compatible Samsung Galaxy S20/ S20+/ S20 Ultra/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 9/ Note 8,

Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

Please Note: The thickness of the phone case’s back should be less than 0.24in.

Any tips for the adhesive dashboard pad?

1. The dash pad is for One-Time use. Once installed, it’s too sticky to remove. Please think twice about the location.

2. Before mounting the suction cup, please let the dash pad sit for 24hrs.

3. We do not recommend it for soft/ curved/ leather/ wood/ plush fabrics/ filmed glass surfaces. In such case, please install it on the windshield or air vent instead.

4. If the weather is getting too hot, please use the air vent clip instead.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• ✅Super Compatibility: This car mount universally fits mobile phone from 3" to 7", like iphone Xs, Xs Max, XR, iphone X, 8 Plus, 8, 7 Plus, 7, 6S Plus, 6S, 6 Plus, 5S, SE, Galaxy Note 8, S8 Plus, S8, S7 Edge, LG K20 V, GPS device like Garmin etc.
• ✅STABILITY: Triple reinforcement on dashboard, large silica gel base, plus a circle of adhesive silicone film and a suction cup, make the phone holder grip firmly on your car.
• ✅SECURITY: Car holder made of high quality spring, as well as two ends of clamping go with non-skip silicone, make it hold the phone securely and won’t slide or fly out even taking a sharp turn, sudden stop or accelerate.
• ✅MOBILITY: Sticky silicone material is not permanent attachment to the dash. It can be taken off from the dash easily, and the silicone bottom become sticky as new after flush.
• ✅Perfect Driving View: Thanks to its mobility, you can put the cell phone car holder at best position for your view. Two different angels provide more choices for you to find non light reflect and clear screen view.

User questions & answers

Question:	Will this hold a GoPro Hero
Answer:	Cellphones are about 3 inches wide and around 5 inches long. This holder with hold them either portrait or landscape style. So, I think it would hold your Go Pro as long as its not being bounced around. Its not any kind of a lock down mount.
Question:	will it work with a android note
Answer:	Not sure how big Android 4 is but it holds my iPhone 8 Plus. Note, this only holds horizontally. You can’t use it vertically. That’s why I return mine.
Question:	Does this fit nite 10 plus with case
Answer:	I have an I phone X max and it fits great
Question:	Can you stick it on and off your dasbboard
Answer:	Yes! Easily! It doesn't actually stick. It lays on the dash and doesn't move. It works very well.

Product features

Aonkey Car Phone Holder Compatible with Different Devices:

• iPhone XS/XS Max, XR, X, 8/8 Plus, 7/7 Plus, 6/6S/6S Plus, 5s, SE,5C
• SAMSUNG Galaxy Note9, Note8, Note Edge, S10, S10+, S10e, S9, S9+, S8, S8+, S7, S7 Edge
• LG V40 Thinq, V35, V30, V20, V10, K30, K7, K8, G7 Thinq, G8 Thinq, Stylo 3, Stylo 4
• Google Nexus 6P, Pixel 3/3 XL, 2 XL, XL
• Moto Z3/Z3 Play, Z2/Z2 Play, G6/G6 Play, G7, G5 Plus, E5,E4, X4
• Nokia 7.1, 3.1 Plus, 2V, 7.1, 9, 3310, 8/8 Sirocco, 6, 6.1/6.1 Plus, 5, 5.1/5.1 Plus
• HUAWEI P30/P30 pro, P20 Lite/P20 Pro, Mate 10 Pro/Mate 20 pro, Mate se, 5X, Honor 8X
• GPS navigator, like Garmin Nuvi Drive DriveSmart DriveAssist, TomTom GO Start, Magellan Roadmate etc, and any other handheld devices less than 7”.

Features of Dashboard Phone Mount for Car:

• Easily removed from one place to another
• Designed without magnets, no harm to phone
• Can be washed and reused as new
• Soft rubber avoid your phone to be scratched
• Besides used in the car, also work for meeting, movie watching, music playing and so on.

Fit for Different Kind of Dashboard

Bottom of the phone holder is silicone, sticky gel and a suction cup , ensure sit on different kind of dashboards firmly. Work good for different kind of cars, such as Audi, truck, Uber, Toyota, Wrangler, Jeep, Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, KIA and so on.

Removable, Reusable and Washable

The car mount grip rather than adhesive to your dashboard, so that you can move it from one car to another easily. Everytime when you want to change a position, flush it under water so the holder can be used as new.

No Matter What on Your Phone

No matter what accessories on your phones, ring holder or heavy cases, you can directly put your phone on the cell phone holder, very convenient and time save.

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Smooth Contact: The phone cradle is padded with soft silicone to avoid scratches to your smartphone or other device
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle
• Wide Compatibility: Compatible with smartphones between 4” and 6.5” in screen size
• Package Contents: AUKEY HD-C50 Dashboard Phone Mount, Sticker Base

User questions & answers

Question:	Will this hold a phone with a popsocket
Answer:	Very nice product. Frequently bought together and well works with 🌈🌈 Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter. High-end Car Music Player 🌈🌈
Question:	Is it adjustable for different angle
Answer:	It's adjustable in all directions,you can attach it on dashboard or windshield.
Question:	I bought a new phone, iphone 11, will this fit my phone
Answer:	Of course. I also have the iphone 11 and this holder works well with my phone
Question:	Does this holder interfere with the button on the side of my phone
Answer:	NO,the grips on both sides are clamped to a third of the phone,it dosen’t interfere with the button.

Product features

Quick Start Guide

Adjust the phone cradle so it grips your phone. To ensure secure mounting, press the back edge of the arm (not the front edge).

Quick Start Guide

Lift the mount locking lever up towards the mount arm, then adhere the mount to the sticker base.

Quick Start Guide

Press down the lever. The mount should now firmly grip the adhesive base.

Quick Start Guide

Adjust the the arm to find your desirable angle.

New placement & safer driving

Lower your mount to a open up your view, it is what we highly recommend.This will significantly improve your driving experience and safety.

Ultra sticky adhesion

Made from silica gel, the pad is ultra adhesive and can clamp your phone steadily.

360 degree rotation

360 degree rotation of the ball head. Easily achieve any angle you want.

• Ultra Stability:Car phone holder can be mounted on dashboard windshield for this car phone mount is equipped with suction cup. This car phone holder has suction pad which will absorb the shock caused by the car. Adjustable devices adopted by this cell phone holder for car are superior in quality. Note: no exposure to the sun (suction cup) for extending its working life and works much better for dashboard with less texture.
• One Hand Operation: Cell phone holder for car is designed to be compact and convenient. Installation and adjustment are effortless. The car phone holder fits firmly and perfectly with your devices. The quick release button allows one to operate the car phone mount effortless.
• Wide Compatibility: Car phone holder suits for various devices. The cell phone holder for car is compatible with different smartphone devices such as iPhone Samsung Galaxy Moto Huawei Nokia LGiPhone Samsung Galaxy Moto Huawei Nokia LG.
• 360 Degree Rotation: The fully 360-degree rotation of this car phone holder ensures you the best viewing angle. This car phone mount supports cell mobile phone vertical, horizontal usage.
• 18 Months Guarantee: This car phone mount is protected by a 18 months Guarantee; we will provide refund or replacement under any condition, to ensures your 100% satisfaction with your purchase.

User questions & answers

Question:	Can this cell phone holder for car support phones with a heavier & thicker battery
Answer:	Yes, it can. I think my phone is heavy, this phone holder for car works with my phone perfectly and never drop.
Question:	I just received mine and it does not clamp shut? if there a trick to this or is it suppose to stay open? it seems like it should shut by the notes
Answer:	The button on the back opens it. And you should just be able to squeeze it shut
Question:	Is there a popsocket holder attachment
Answer:	I don’t think a pop socket would work. The phone sits flat against the back of the holder. I don’t think a pop socket would fit in the space available. If it did, I don’t think the phone would be sit securely.
Question:	This product is flimsy and the tension spring is loose. I’d like a refund or an exchange
Answer:	The spring mechanism quit working for me after a few uses and the seller won't respond.

Product features

Phone Width from 2.7″ to 4.2″

Universal compatibility of this car phone mount ensures it's compatible with the vast majority of smartphones. Quick release button located on its back enables one to mount and remove with a single hand gesture.

Adjustable Arm.

The telescopic arm rotates 225° and can be extended from 4.6″ to 6.6″, the pivot ball joint rotates 360° for perfect viewing angles.

360 Degree Rotation.

The ability of this car phone mount to rotate 360 degree means one has the choice between portrait and landscape viewing.

Strong Suction Cup.

Suction Cup has a sticky gel surface that securely attaches to your car’s dashboard or windshield, and can be cleaned with water and air dried for continued stickiness!

• Ultra Stable Car Phone Mount: Your newly upgraded car cell phone holder adopts a super-strong vacuum suction cup, which can bear a load of 13kg (12+ stronger than traditional type); Perfectly passed 1000+ times of jitter test, maximize clamp your mobile phone even on bumpy roads. Don't get stuck with those cheap ones which have weak stickiness. You deserve the best. That's why your new car phone holder should be firm enough to protect your entire phone.
• Easily Get Any View Angle You Desire: Your new version smartphone car mount offers 360-degree rotation and fixing and you'll get the arm reach up to 7.1 inches (18 cm). Unlike previous cheap plastic structure, the high-density aluminum alloy telescopic rod will ensure perfect performance in extreme environments.
• Compatible with Any Phone: Your universal car phone holder is widely suitable for 4-7 inch devices, total thickness up to 0.5 inch (15mm), fit perfectly for iPhone 12/ 12 Pro Max/ SE /11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus/ 6s / 6 Plus / 6 / 5s, Samsung Galaxy S21/ S20 / S20 FE/ S10+ / S10e / S9 / S9+ / S8 / S8+ / Note10 / Note10+ / Note 8 / S7 / S7 Edge / S6 / S6 Edge / S5 / S4, HTC, Sony, LG, Huawei, Google Pixel, Sony, Nokia and other cellphones.
• Time-saving Operation: With just a touch open the arms in 0.1 seconds, slide the phone, close arms and enjoy hands-free travel; in order to improve the user experience, our structural engineers have optimized internal structure, two-arm closed accuracy reaches 0.03 inch and even in low temperature environment, the car holder can ensure normal function; gears mesh more smoothly and reduce noise. Feel free to install it in your car, truck, taxi, truck etc.
• Get Your Multi-scene Car Mount Now: Your 4th version cell phone car holder can be mounted to your car dashboard, windscreen, air vent, even on desk or anywhere used as a phone holder. (NOTE: If there is a deep texture on your dash, we recommend that you stick the dash pad first.) Any question or problem just contact us, you will always get a prompt response and satisfied solution!

Product features

Newly Improved Vacuum Suction Cup

After continuous research and development, the new design of our suction cup allows for increased strength onto desired surfaces. The unparalleled bond helps ensure you never need to worry about your phone falling again! Additionally, this newly designed suction cup can be rinsed off to help ensure the most secure bond if you'd like to remove it to a new position.

Multi-functional car phone mount

The suction cup can be installed on your windshield, dashboard, or even on a desk to be used as a phone holder. Don't want to use the suction cup? Not a problem! You can also use the included air vent clip to attach to virtually any air vent!

Unmatched Smooth Expansion

Upgrade Internal Gear structure, smoother meshing, achieve Noise-free operation.

Minimalist Packaging, Good Choice as a Gift

• 1* Suction Cup Base
• 1* Air Vent Clip
• 1* Dash Pad
• 1x User Guide