14 best car mount iphones

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• WIDER COMPATIBILITY: New larger Easy One Touch button and cradle allows for wider device & case compatibility.
• MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located on the bottom foot
• TELESCOPIC ARM: The improved telescopic arm now extends from 5” to 8” (as opposed to the Easy One Touch 4 which only extended to 6.5”) and pivots 225 degrees. This enables a myriad of customized viewing angles while you’re on the road.
• REDESIGNED BOTTOM FOOT: Easier to secure and adjust; simply squeeze the spring button and pull down.
• ENHANCED SUCTION CUP: Redesigned suction cup with an improved sticky gel formula that provides a stronger, lasting hold.

User questions & answers

Question:	Will the adhesive patch damage a leather dashboard
Answer:	I would assume so but it isn't very adhesive honestly I have to wet the sticky part for it to stick to my dash
Question:	Will this cradle hold iphone 11 pro? I have older version for my iPhone 6+, it's still functional & I luv it but my 11 pro does not fit it
Answer:	It fits my iPhone 12 Pro Max, easily
Question:	Is it applicable for windshield as well
Answer:	Yeap! I’ve had mine on my windshield since the day I got it and no issues at all. It’s very sturdy and hardly moves even on bumpy terrain. Hope this helps!
Question:	How wide is the cradle? (How wide can a phone be before it won't fit
Answer:	I used this for my iPhone 8 Plus with an Otterbox Defender on it (not a slim combo) and it was plenty wide enough.

Product features

Telescopic Arm

Arm pivots 225 degrees for custom viewing angles on the road

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying

Mount Foot & Magnetic Organizer

New Foot easily adjust to standard & large smartphones, and helps keep cords organized

What's Included

Includes Mount, Dashboard Pad and Cable Tag

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• Worry Free Driving - The Durahold Series with a re-designed extendable car mount securely holds your smartphone to your dashboard or windshield providing you with a hands-free driving experience! Featuring extendable arms to accommodate smartphones of all sizes and an anti-slip pad to completely hold your device in place. (Compatible with most smartphone, including iPhone 12/11 Pro Max, XR, XS Max, 8+, X, 8 7, Galaxy S20, S20+,10, S10+, S10e,S9 S8 S7, Note 20 10, LG, Pixel, HTC and more.
• Easy To Install - No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. (Note: It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold).
• Versatile Angles - Featuring a ball swivel for 360-degree rotation, jointed arm for easy movement and an extendable neck for extended viewing. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable and perfect viewing experience.
• Powerful Suction - Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.
• What You Get - Limited One Year Warranty from Maxboost ensures maximum protection for your Maxboost Extendable Arm Car Mount.

Product features

UNIVERSAL COMPATIBILITY

The one-touch side button for a quick release, while the retractable arms for an snug-fit.

EXTRA STRONG

Multi-knobs securely holds your smartphone to your dashboard and windshield.

ADJUSTABLE VIEWING ANGLES

Adjustable arm extends and contracts to provide user with a comfortable mobile experience.

Product description

The role of the car phone holder is mainly to provide a carrier for the mobile phone. By fixing the mobile phone to the car phone holder, you can use mobile phone navigation, video and voice calls, etc.



Product features of this car phone holder:



1. Upgrade the car mount arm, change the curved clamp arm to the rectangular clamp arm, change the center of gravity of the clamp arm, and better hold the mobile phone



2.The car phone mount is compatible with phones up to 6.8 inches, including iPhone 11 Pro Max, XS Max, XR, X, 8/7/6 Plus; Samsung Galaxy S10, S9, S8, Note 9/8/7 and more



3. Upgrade the clip of the car phone mount, the 3-level adjustable clip is easy to install and disassemble, the clamping force is stronger, and it can be better fixed in the vent



4. Ball joint design, you can rotate 360 degrees through the ball joint until the comfortable angle of view



5. We have reserved enough space for the charging cable between the two car phone mount feet to ensure that the phone can be charged normally.



6. On the surface of the product, the inside of the clamp arm and the car phone mount foot are attached with a sponge pad and a silicone pad to reduce the friction of the mobile phone and the mount, and protect the mobile phone.

• Adaptable to Most Phone Sizes: The phone holder expands up to 95mm/3.7in wide, holds most phones with screen sizes between 4.7’’ and 6.8’’, including iPhone Xs Max/XR/XS/X/8 Plus/8/7 Plus/7/6 Plus/6/6s Plus/6s; Galaxy S10/S10 Plus/ S9 Plus/S9/Note 9/Note 8/S8/S7/S7 Edge/S6 Plus/S6; Pixel/Pixel 3 XL/3/2XL/2/XL; LG; BLU; Xiaomi; Moto and more. TIPS: Supports phone case thickness up to 13 mm / 0.5 inch.
• Upgraded Arms for Secure Hold: The side arms have been upgraded for stronger stability. Compared with the old version, the center of gravity of the arms has been shifted up so that your phone stays put without wobbling. There are sponge pads on side arms, which will protect your device from falling out and scratching.
• Stays Put Without Falling Off: Featuring inner Manganese Steel plates and durable PC material, the extended vent clip will stay in place regardless of the road conditions. The spring-loaded vent clip is equipped with an adjusting lever, providing you with 3 different tightness. 1st level: 2.5 - 3.5mm; 2nd level: 1.8 - 2.5mm; 3rd level: ＜1.8mm, fits most vertical or horizontal vent louvers.
• Easy One-Handed Operation: The car phone mount has a quick-release button on the back. There is no need to expand the arms with your hands, just place your phone in the holder and squeeze the arms to hug your devices. Also, you are allowed to remove your phone without hassle. There is space between the bottom feet for you to attach a phone charger.
• Keep Your Phone in Sight: The 360 degrees ball joint ensures that you hit the sweet spot every time you place your phone in the car phone holder. You can get the comfortable viewing angle by adjusting the mount up/down or vertical/horizontal. The air vent-mounted car mount enables you to access your GPS, music and all controls easily without blocking your vision while driving.

Product features

Mpow universal air vent car phone mount

Mpow air vent car phone holder has been designed to fit most car air vents due to its three-level thickness settings. With Mpow car mount, you will free your hands from holding smartphones and improve driving safety without blocking your sight.

Reserved Charging Port

At the bottom of the cradle, there’s a reserved space. It is the perfect size for a phone charger to go through. Don’t have to take your phone out of the cradle.

Fits the vast majority of smartphones easily

The stretchable clamp can hold devices with a size of 4.0 - 6.8 inches, perfect for iPhone, Galaxy, Google Pixel, BLU, OnePlus, Motorola, LG and so on.

Adjustable Angles

Fully adjustable with 360-degree rotation for viewing your device at the right position. Change your perspective with a simple ball-and-socket joint.

• Andobil Multifunctional Car Phone Mount: With the latest improved suction cup and vent clip [ stronger & tighter ], this cell phone holder can hold your phone firmly on dashboard windshield or air vent, even on the bumpiest road. Better yet, it comes with a 2-step locking system, which provides more reliable attachment to your car.
• Easy One-Touch Operation: Just a simple touch to mount or remove your phone within seconds - Super easy to use while you drive. It also features an adjustable foot, making this car mount universal for any cell phones up to 7”. Compatible with iPhone/ Samsung Galaxy/ LG/ Pixel, etc.
• Extreme Flexibility: Thanks to the 360-degree swivel head, your phone can be oriented to portrait, landscape, or any angle in between. For added convenience, it has an extendable long arm to keep your phone always in view - And ready for hands free calls, GPS navigation & music streaming.
• Better Design Than Ever: Andobil phone holder for car is made with the most superior ABS plastic and anti-scratch cushion, which ensures full protection of your beloved phone. Moreover, the sturdy arm and stable ball joint can increase its durability. You won't need to worry about your phone falling anymore.
• What You Get: Andobil car phone mount *1, improved suction cup *1, upgraded air vent clip *1, dashboard pad *1, user manual *1. They are fully protected in exquisite package. It will bring an easy and safe driving experience to you and someone you care about.

Product features

Andobil Car Phone Mount

Meet Easy Clamp 2.0 - Andobil car phone mount 2nd generation. After so many tests and redesign, we've improved it to the best version ever. Andobil team has studied all the feedback to make it ideal for your daily drive.

• When it comes to a stronger suction cup, the stickier gel and thickened pad of this holder is all you need.
• With the 1-sec quick release button, you can mount or remove the phone faster and more smoothly.
• Horizontal or vertical, closer or further. This flexible motion allows free reach to your mobile.
• Best 3-in-1 mounting solution for your car. Feel free to use it on the dash, windshield or air vent.
• Versatile for different cellphones and cars in the market. Start to add some intelligence to your drive.

The goal of this car phone holder is simple: To securely hold your phone in place, while you just keep focused on the road.

Adjustable Foot

If your phone is large size, you can pull the foot down. So our phone car mount can hold your big phone better fit.

360° Free Rotation

Full 360° rotation allows limitless possibilities, including landscape and portrait viewing.

Hassle-free Charging

Reserved space for your charging cable. Juice up your phone freely on a road trip.

Best Phone Holder for Car

Does it support all mobile phone models?

This car phone mount fits most phones from 4” to 7”. It’s compatible with iPhone 12/ 12 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS Max/ XS/ XR/ 7 Plus/ 7/ 6s/ SE,

Compatible Samsung Galaxy S20/ S20+/ S20 Ultra/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 9/ Note 8,

Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

Please Note: The thickness of the phone case’s back should be less than 0.24in.

Any tips for the adhesive dashboard pad?

1. The dash pad is for One-Time use. Once installed, it’s too sticky to remove. Please think twice about the location.

2. Before mounting the suction cup, please let the dash pad sit for 24hrs.

3. We do not recommend it for soft/ curved/ leather/ wood/ plush fabrics/ filmed glass surfaces. In such case, please install it on the windshield or air vent instead.

4. If the weather is getting too hot, please use the air vent clip instead.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.

• 【Philosophy of Chief Designer】It's my star work among 100+ car holder designs, which recovers originally simple. Simplicity is a philosophy & joy & life attitude. Wish the simple product & service can please you. Expecting your opinions to grow my baby
• 【Patented Multi-scene Design: Car/Desk/Kitchen/Bathroom/Gym】VANMASS car phone holder brings sticky suction cup & steel-cored vent clip from 3000+ surveys. Ideal present for your specials. Luxury look & structure was certified by RoHS, CP65, REACH
• 【Original 4 Technologies- Thanks to Millions of Users' Voice】1) Extreme -40~194℉ Weather resistance from precious KING of plastic 2) Super suction power up to 44LBS 3)Extra pad for smooth surface 4)Steel-cored 3-Level Clip: 20X stable & durable
• 【Millions of Users Preferred 0.96” Width Bottom Tray - Easy to Touch HOME button & Unlock screen & Plug charge cable】Upgraded from flimsy drop-down bottom tray, the solider & wider bottom tray can support any weight phone on the bumpy road
• 【Luxury Present: Top-notch Configuration & Profound Package】Exquisite car phone mount (suction cup/vent clip/pad) is fully protected in Elegant & Eco-friendly box. V-shaped pattern on the package means Vibrant & Victory to you and your special one

Product features

Luxury Configuration with Decent Package

• 1x Phone Cradle
• 1x Exclusive Suction Cup Mount
• 1x Alternative Steel Cored 3-level Clip
• 1x Adhesive Dashboard Pad
• 1x User Manual
• 1x Thank You Card

NO Melt, NO Break - Patented Design & Advanced Material

Boasts 5 years of experience in car holder, we finally find the best materials & structure for durable use even in extreme condition (Bear 10,000 times vibration).

Sturdy yet Gentle - Fully Soft Silicone Protects Phone

Soft full silicone rubber interior would protect your expensive phone from scratches & bumps. Grip your phone like hands, tight but no hurts.

Stainless Steel Structure - Last Forever

Different from the easy-to-wearing iron screw, this mount uses the stainless steel screw to be incredibly solid & steady, tested under extreme 10Hz super high vibration frequency for 26,000 hours.

Leading Super Adhesive with Strong Suction Lock

Reinforced sticky suction pad is 5 TIMES stable & flexible than others. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers. Also can be a useful desk phone holder.

Best Gift Idea

VANMASS car mount will help your lover take advantage of all phone’ s handy features without taking the hands off the wheel to ensure his/her safety.

• [Multi-function Cell Phone Holder] 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. One small car mount or car vent mount feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Stable and Safe Car Phone Mount] Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.
• [True Universal Cell Phone Holder for Car] Super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. It is compatible with iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360 Degrees Rotation Car Cell Phone Mount] The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. Find a best view for your trip. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pickup phone calls. You can focus on your drive, VICSEED mobile phone holder will do the rest of jobs for you.
• [One Hand Operation Phone Car Mount] After the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. Release your smart phone by pressing the left bottom release button in one second. VICSEED smartphone car mount gives you an easy and safe driving journey.

Product features

Adjustable Foot

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our car mount can hold your big phone better fit.

Thick Case Friendly

The depth of the holder is 0.67''. VICSEED phone mount fits small or thin phones perfectly. It also fits for thick or large phones, and with super thick cases. No need to take off phone cases any more. Just drop your phone in it, it will do the rest of job for you.

Reserve Charging Port

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Strong Clamp Power - Fit for All 4.5'' - 7'' Phones

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

Product description

The main advantages of the windshield car phone holder:



1. Washable suction cup: When the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water



2. High-quality gooseneck: the gooseneck is 9 inches long and can be bent to adjust the viewing angle



3. Ball joint design: You can adjust the viewing angle by rotating the ball head, and then tighten the nut to fix it



4. One-click release button: the clamp arm can be opened by pressing the side button, and the clamp arm can be extended to 3.7 inches, which is compatible with large-size mobile phones



5. Sponge pad protection: we attach a sponge pad inside the car phone holder to protect the phone



6. Foldable car phone holder feet: If you want to place the phone horizontally, you can fold up the car phone holder feet, so that you can adjust the phone left and right to change the center of gravity and better hold the phone

• High Quality Aluminum Gooseneck: The aluminum gooseneck of the high-quality car phone holder is 9 inches long. You can adjust the viewing angle by bending the gooseneck. We have included a stabilizing device in the package to fix the gooseneck to prevent shaking
• Upgrading the Suction Cup of Car Phone Holder: We upgraded the material of the suction cup of the car phone mount from PVC to TPU, thereby greatly improving the heat resistance and stability of the suction cup, at the same time, we increase the hardness of TPU from 70 to 75, so that the suction cup is not easy to deform
• Washable Suction Cup: When the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water
• Compatible with 4-6.9 inch Mobile Phones: You can press the button on the left to open the clamp arm. The clamp arm can be extended to 3.7 inches to hold larger phones. With a powerful suction cup, you can easily hold 4-6.9 inch phones, such as iPhone 11 Pro Max , Xs Max, Xr, X/8/7/6 Plus etc
• Flexible Adjustment of Viewing Angle：You can adjust the viewing angle of the car phone holder in two places, one is to bend the gooseneck, the other is to rotate the ball joint, the ball joint can rotate 360 degrees, and finally tighten the nut to fix the position.

Product features

MPOW Windshield Long Arm Car Phone Mount

• Fits any cellphones with screen between 4.0’’ & 6.5’’ perfectly even with protective cases (Case should be within 5mm). Save your trouble of taking off the phone case.
• Made of high-quality aluminum, the long flexible arm makes the device closer to your sight for more comfortable and safer driving. The car mount will not block your view whilst driving as you can adjust it to any desired angle.

Not Only Works in Car

You can not only use it in your car for holding phone but also at your office or at home for Facetime with others, hands-free call, and watching movie, etc

Upgraded Strong Suction Cup

Upgraded to TPU material, now the strong suction cup has better heatproof performance and more stable installation even during hot Summer. Simply toggle the switch up/down to install/uninstall the long arm

Washable & Reusable

When the suction cup become non-sticky and dirty, you can rinse it with water then air dry. By doing so, it will adsorb tighter to the windshield or other smooth surfaces.