10 best replacement

Product description

The Philips Sonicare Optimal plaque Control brush head features a concave trim profile specifically designed to target tooth-decaying plaque by hugging teeth and offering better conformity and surface-area coverage. Compatible with all click-on Sonicate models, these replacement brush heads remove up to 7x more plaque than a manual toothbrush. Use with a Philips Sonicate brush Sync(TM) compatible handle (Diamond Clean Smart or protective Clean) to unlock Smart features: brush Sync mode-pairing triggers your handle to select optimal mode and intensity level for exceptional plaque removal (certain models only); brush Sync replacement technology tracks how often and how hard you brush and will notify you when it is time to replace your brush head.

essential oil Warning: toothpaste containing essential oils can damage your brush head. Avoid direct contact with products that contain essential oils or coconut oil. Use may result in bristle tufts dislodging.



reminder bristles fade to let you know when it's time for replacement. Replace your brush head every 3 months as recommended by the American Dental Association. A fresh brush head every 3 months maximizes the effectiveness of Philips’ unique sonic are technology.



Philips sonic are optimal plaque toothbrush heads were formerly sonic are Pro results plaque Control. Brush head not well placed Reattach the brush head. Make sure that the brush head is well placed and not loose or wobbly. A small gap between the handle and the brush head is normal. Counterfeit brush heads Counterfeit brush heads may make more noise than genuine Philips Sonicare brush heads. We recommend you to use genuine Philips Sonicare brush heads. Brush head is worn If you used the same brush head for more than three months, you might need to replace your brush head. As brush heads wear out, they may start to produce more noise. We recommend replacing the brush head every three months.

• Superior clean: Clinically proven to remove up to 7x more plaque along the gumline and in between teeth than a manual toothbrush
• Special design: With a power tip to target plaque in hard to reach areas
• Gentle and effective: Soft, tightly packed bristles smoothly glide along the gum line, providing an amazing clean even without the perfect technique
• No guessing: Built in brush head replacement reminder lets you know when to replace your brush head, so you don’t have to remember
• Better together: Get the most from any Sonicare click on handle with genuine Sonicare brush heads that are designed to work together and provide optimal performance

User questions & answers

Question:	Does this fit sonicare Hx
Answer:	Hello! The handle for this Sonicare ProtectiveClean 6100 is plastic.
Question:	Will these fit the Sonicare model HX
Answer:	Hello! Yes, your Philips Sonicare toothbrush is water resistant. However, we do not recommend using it on the shower/bathtub. Follow cleaning instructions as per the manual.
Question:	Do these fit the essentialclean hx
Answer:	I was using ,but my hygienist told me to use Arm and Hammer toothpaste. it sounds counter intuitive, but Crest contains a chemical that can stain, even the whitening tooth paste..
Question:	Does this fit HX
Answer:	Hello! Yes, the Sonicare ProtectiveClean 6100 charges on a plug-in charging base.

Product features

Say goodbye to plaque

Densely-packed, high-quality bristles remove up to 7x more plaque than a manual toothbrush. And the specially curved power tip makes reaching the teeth at the back of your mouth a breeze.

Brush head replacement cues

Brush heads become less effective after 3 months of use, but we'll remind you before this happens. When used with a Philips Sonicare BrushSync compatible handle (e.g. any DiamondClean Smart or ProtectiveClean model), your toothbrush tracks how often and how hard you brush, and will notify you when it's time for a replacement. Don't have a Philips Sonicare BrushSync compatible toothbrush? No worries, just monitor your blue replacement reminder bristles, and when they turn white you'll know it's time.

BrushSync mode-pairing

When used with a Philips Sonicare BrushSync compatible handle (e.g. any DiamondClean Smart model or ProtectiveClean 6100), our convenient BrushSync mode pairing feature will allow you to effortlessly achieve the best possible clean. A microchip inside the Optimal Plaque Control brush head communicates with your handle. When the brush head is clicked on, the handle automatically selects the optimal mode and intensity level for exceptional plaque removal. All you need to do is start brushing.

The only true sonic technology

Our brush heads are designed to perfectly sync with Philips Sonicare technology. High-speed vibrations give up to 31,000 brush strokes per minute for outstanding results. This starts in the handle of every Philips Sonicare toothbrush. It powers every brush stroke to whip up your toothpaste into plaque fighting bubbles, driving them deep between your teeth and along the gum line for gentle yet effective cleaning.

Easily clicks on to all our handles

The Optimal Plaque Control brush head simply clicks on to your Philips Sonicare toothbrush handle and fits securely in place. Brush head replacement is made easy; just click off. Our click design makes it super simple to maintain and clean your brush head. The Optimal Plaque Control brush head fits all of our click-on toothbrush handles (does not fit Essence, PowerUp or Sonicare for Kids).

Better oral healthcare

All genuine Philips Sonicare brush heads are safe and gentle on teeth and gums. During tests, our brush heads are put through their paces to ensure you get exceptional performance and durability each time you brush. Not a single generic brush head tested* meets all quality and performance requirements for Sonicare genuine brush heads. Always use genuine Philips Sonicare brush heads for best results.

Product description

Extra Replacement Filter will be Restocked Until 10th January.



Genuine Levoit Replacement Filter Designed specifically for the Levoit LV-PUR131 & LV-PUR131S, these certified Levoit brand replacement air filters allow you to keep producing fresh air for your home. Replacing the Air Filters To replace your the    air filters in your LV-PUR131 or LV-PUR131S air purifier follow the steps below:  1) With the air purifier off, unplug the air purifier and remove the back cover  2) Remove the old air filters and properly dispose of them  3) Unwrap the new air filters. Place the Activated Carbon filter inside the housing first, making sure the pull tabs are facing the opening  4) Install the True HEPA filter into the housing; make sure the pull tabs are facing the opening.   5) Replace the back cover onto the housing  6) Plug in and turn on the air purifier. Use a pen or a pencil to press the black reset button inside the vent on the side of the air purifier. The "Change Filter" symbol should now be off. Be sure to also clean the dust sensor on the side of the air purifier using a clean cotton swab.When Should I Replace My Filters? The air filters can be used for up to 6 months, depending on how often your air purifier is used. If you need additional help, feel free to reach out to our helpful Levoit support.Package Contents2 x Fine Preliminary w/ True HEPA Filters2 x Activated Carbon Filters

• Note: only Genuine Levoit Replacement Filter can guarantee the performance of your air purifier.
• H13 True hepa technology: filters 99. 97% dust, pollen, smoke, odors, mold spores, and pet dander. The air filters catch particles as small as 0. 3 microns
• 3-Stage Filtration System: H13 True Hepa, fine preliminary filter, and high quality activated carbon filters reduce unwanted odors in your living spaces. Perfect for anyone wanting to improve air quality
• Properly sealed: filters are sealed to protect their lifetime. It is recommended to replace air filters every 6 months. Remove filters from plastic packaging before placing them into air purifier
• Buy with confidence: 100% satisfaction . If you need additional assistance, contact the helpful LEVOIT support

User questions & answers

Question:	My filter stopped working completely. The controls all light up, but nothing happens. How do I fix this
Answer:	This is a natural product and so the color will vary from batch to batch. I've bought this four times. The color has ranged from pale yellow to more of a light honey color. Despite the difference in color, it has always had a fresh, slightly nutty smell and gave no indication of being rancid which is the biggest problem with oils. Dark orange? I don't know about that. If you can send it back without a hassle, I'd do so and request a fresh replacement. It's a great oil.
Question:	How often should the filters be replaced if I leave it on all night in my baby’s room and also use throughout apartment in kitchen (heavy cooking
Answer:	I bought it for my hair, it made my hair incredibly sticky, heavy and limp and caused it to clump plus its smells "off". I suspect this is not Argon oil or its rancid one of the two. Yes you can use argon oil on your hair, work one drop into your palms, and then run your hair through your hands to smooth on. Never do more than a drop at time or the roots of your hairs, you will have greasy spots in your hair. I have very thick very long hair and I use no more than 4 drops per application to control dryness and frizz...that will give you an idea of how much to use.
Question:	Change filter icon stuck on display. Reset button, cleaning sensor, and replacing filter won't work. Any workarounds to get rid of the icon
Answer:	Under this listing you have three choices: Argan, Citrus Argan and Marula. The reviews are for all three. Click on the "style" you want and that's what you will get. I've ordered Marula several times from this vendor. It is excellent and blows Argan out of the water.
Question:	Could someone please do me a huge favor and give me the actual filter dimensions not the dimensions of the package size already on the listing.tx
Answer:	Its all one inflation

Product description

The Philips Norelco OneBlade replacement blade trims, edges, and shaves any length of hair. The unique OneBlade shaving technology integrates a fast moving cutter (200x per second) with a dual protection system to give you an efficient comfortable shave on longer hairs. OneBlade does not shave too close, so your skin stays comfortable. The replacement blade last up to 4 months (For best shaving experience. Based on 2 full shaves on face per week. Actual results may vary.) Fits on all OneBlade, OneBlade Face + Body, and OneBlade Pro handles. Pack includes: 3 replacement blades.

• 3 Blades last up to 12 months; (For best shaving experience; Based on 2 full shaves on face per week; Actual results may vary)
• Trims, edges, and shaves any length of hair
• Glide coating and rounded tips protect your skin; not too close for a comfortable shave
• Use dry or wet with foam, even in the shower
• Fits on all OneBlade, OneBlade Face plus Body, and OneBlade Pro handles

User questions & answers

Question:	Where is it made
Answer:	Hello! Philips OneBlade is made in Indonesia.
Question:	will these replacement heads fit on qp
Answer:	Hello! Yes, these replacement heads are compatible with the Philips Norelco One Blade (QP2520/90).
Question:	how can i tell when its time to replace blade
Answer:	If you wait 3 months to replace this blade you will be better of with a butter knife. A half dozen shaves is all you will get if your lucky. Unless your face is peach fuzz. Mine faded to green and completely disappeared after 3 and a half weeks. I use it maybe 2 or 3 times a week.
Question:	How long does the blade last
Answer:	This is mainly for newbies reading this question....I use it every other day/whole face and it lasts a month. Thinking of going back to a corded beard trimmer. NOT cordless. Two blades for this thing are $24. The trimmer itself is $29. My last corded beard trimmer lasted two years and the only reason I stopped using it was because I got this. Unfortunately I tossed it thinking this would last longer than one month. Don’t get me wrong it will and does work after a month it’s just not as comfortable and takes more going over the same area. It’s a good product, it just costs $12/mo to operate. That’s kind of nuts. The blades should really be like $4.

Product features

Unique OneBlade technology

The Philips Norelco OneBlade is a revolutionary new electric grooming technology designed for men who wear stubble, beards, or facial hair styles. OneBlade trims, edges, and shaves any length of hair.

The unique OneBlade shaving technology integrates a fast moving cutter (200x per second) with a dual protection system to give you an efficient comfortabe shave on longer hairs. OneBlade does not shave too close, so your skin stays comfortable. Each replacement blade lasts up to 4 months. (For best shaving experience. Based on 2 full shaves per week. Actual results may vary.)

Contour Following

OneBlade follows the contours of your face allowing you to effectively and comfortably trim and shave all areas of your face.

Wet and Dry

OneBlade is water resistant, so it is easy to clean: just rinse it under the tap. You can shave dry or wet with foam, even in the shower.

Durable OneBlade

The blades are designed to last. Replacement is easy and hassle free. For optimal performance, you will need to replace the blade every 4 months. (For best shaving experience. Based on 2 full shaves per week. Actual results may vary).

Product description

The Philips Sonicare G2 optimal gum Care toothbrush head (formerly ProResults gum health) is perfect for those who want a gentle yet optimal plaque removal experience. The outer bristles gently remove plaque from the gumline.

• Genuine Philips Sonicare rechargeable electric toothbrush head compatible with all Philips Sonicare click on rechargeable toothbrush handles
• No.1 Recommended power toothbrush brand by Dental Professionals
• Improves gum health up to 100 percentage versus a manual toothbrush
• Gently removes up to 6x more plaque along the gum line than a manual toothbrush
• Brush Sync mode, pairing and replacement reminders when used with a brush Sync compatible handle (diamond Clean Smart or protective Clean)

User questions & answers

Question:	Do these fit the HX
Answer:	Hello! The Philips Sonicare HX9033/65 brush heads are compatible with the Hx6950 toothbrush.
Question:	Are these compatible with the HX6511 series
Answer:	Greetings! Yes, the Philips Sonicare HX9033/65 is compatible with the Philips Sonicare HX6511 Toothbrush.
Question:	will these fit a HX
Answer:	Hello! The Genuine Philips Sonicare Optimal Gum Health replacement toothbrush heads, HX9033/65 are compatible with all Philips Sonicare electric toothbrush handles that accept the Click-on replacement. The Philips Sonicare 3-Series (HX6631) electric toothbrush is also compatible.
Question:	The replacement brush don’t fit all the way down on my 6100 handle. There’s about 1/8” gap. Should I remove the rubber cone from the handle shaft
Answer:	That about normal of 1/8" gap.

Product features

Improves gum health up to 100%

Densely-packed, high-quality bristles give you an extra gentle brushing to remove plaque along the gumline to improve gum health up to 100% more than a manual toothbrush. And, the specially curved power tip makes reaching the teeth at the back of your mouth a breeze.

Brush head replacement cues

Brush heads become less effective after 3 months of use, but we'll remind you before this happens. When used with a Philips Sonicare BrushSync compatible handle (e.g. any DiamondClean Smart or ProtectiveClean model), your toothbrush tracks how often and how hard you brush, and will notify you when it's time for a replacement. Don't have a Philips Sonicare BrushSync compatible toothbrush? No worries, just monitor your blue replacement reminder bristles, and when they turn white you'll know it's time.

BrushSync mode-pairing

When used with a Philips Sonicare BrushSync compatible handle (e.g. any DiamondClean Smart model or ProtectiveClean 6100), our convenient BrushSync mode pairing feature will allow you to effortlessly achieve the best possible clean. A microchip inside the Optimal Gum Care brush head communicates with your handle. When the brush head is clicked on, the handle automatically selects the optimal mode and intensity level for exceptional plaque removal. All you need to do is start brushing.

The only true sonic technology

Our brush heads are designed to perfectly sync with Philips Sonicare technology. High-speed vibrations give up to 31,000 brush strokes per minute for outstanding results. This starts in the handle of every Philips Sonicare toothbrush. It powers every brush stroke to whip up your toothpaste into plaque fighting bubbles, driving them deep between your teeth and along the gum line for gentle yet effective cleaning.

Easily clicks on to all our handles

The Optimal Gum Care brush head simply clicks on to your Philips Sonicare toothbrush handle and fits securely in place. Brush head replacement is made easy; just click off. Our click design makes it super simple to maintain and clean your brush head. The Optimal Gum Care brush head fits all of our click-on toothbrush handles (does not fit Essence, PowerUp or Sonicare for Kids).

Better oral healthcare

All genuine Philips Sonicare brush heads are safe and gentle on teeth and gums. During tests, our brush heads are put through their paces to ensure you get exceptional performance and durability each time you brush. Not a single generic brush head tested* meets all quality and performance requirements for Sonicare genuine brush heads. Always use genuine Philips Sonicare brush heads for best results.

Product description

While home tap water may look clean, lead and other contaminants can get into your water through leaching lead service lines or from lead contained in household plumbing. For cleaner water, remember to change your PUR water filter. This easy-to-change 3 pack of PUR Pitcher Replacement Filter with Lead Reduction fits in all PUR pitchers and dispensers. A compatible filter does not mean comparable! PUR PPF951K Lead reducing water filter replacements are WQA certified to reduce lead and other contaminants for cleaner, great tasting water. A water filtration system is important because tap water may look clean, but can contain potentially harmful contaminants from pipes. PUR Lead reducing Pitcher filters are Certified to reduce lead and 3x more contaminants than Brita. Compatible water filter replacements are not guaranteed to offer the same water quality, so make sure you are using a Genuine PUR filter for guaranteed results. Additionally, using a PUR lead reduction filter system can reduce plastic waste and is more affordable than bottled water, helping you save up to $1,000 per year. Plus, each replacement water filter provides 40 gallons of filtered water, or 1-2 months of typical use. PUR is the #1 selling brand among certified lead reducing filters.* PUR has been developing innovative technologies for superior water filtration for over 30 years. We believe life deserves PUR water. Disclaimers: *Based on Nielsen sales data for the 52 weeks ending 5/23/20. **Based on WQA certifications for original Brita pitcher filter OB03 and PUR pitcher filter PPF951KTM as of 5/28/20. Brita is a trademark of Brita LP. Certified by NSF and WQA to remove contaminants by up to 99%. See Performance Data Sheet for the specific compounds reduced by this device.

• WATER FILTER PITCHER REPLACEMENTS – Enjoy cleaner, filtered water by replacing your water pitcher filter. This 3 pack of easy-to-change water filter replacements fits in all PUR pitchers and dispensers. Model number: PPF951K3.
• PUR LEAD REDUCTION FILTER – PUR water filtration pitcher filters are WQA certified to reduce lead and other harmful contaminants that could be lurking in your drinking water. PUR PPF951K is certified to reduce 3X more contaminants than Brita filter OB03.*
• WHY WATER FILTRATION? Tap water may look clean, but can contain potentially harmful pollutants & contaminants from traveling through pipes. PUR Lead reducing water filters reduce these contaminants.
• COMPATIBLE DOES NOT MEAN COMPARABLE –Genuine PUR Lead reducing pitcher filters are certified to reduce harmful contaminants from your water. Compatible water filter replacements are not guaranteed to offer the same water quality.
• #1 SELLING BRAND AMONG CERTIFIED LEAD REDUCING FILTERS** – Contaminants can enter your water system daily, so filtering your water is important. PUR has been developing innovative technologies for superior water filtration for over 30 years.
• Included Components: 3 Replacement Filters

User questions & answers

Question:	Does this filter help soften hard water from tap
Answer:	We will be happy to help you. Our filters are not rated to remove minerals from the water, and will not soften the water coming from your tap. For further support, please reach out to us directly. Our email and phone number can be found in the literature and on the box.
Question:	Pur says: "certified by wqa as of 11/16/18 to remove 99% lead, average reduction of lead at ph6.5 and ph8.5." what about as of
Answer:	Thank you for your inquiry. Our filter certification for lead reduction is still valid and our filtration medium has not changed. If you have any other questions please do not hesitate to contact our consumer relations team by emailing us at [email protected]. Thank you.
Question:	My last two filters had water in them as soon as i opened them. i dont dare use them now! why would this happen & who can i talk to
Answer:	We will be happy to clarify this. The moisture in the packages is left over from the pasteurizing the filters go through before they are packaged. Sometimes, the superheated steam gets trapped in the packaging and condenses back into water as it cools. These filters will be perfectly safe for use as they are still sterile inside of the packaging. If you have any other questions please do not hesitate to contact our consumer relations team by emailing us at [email protected]. Thank you.
Question:	This item cost $9 a few weeks ago and now almost three times higher! Price gouging? At a time when honorable companies are stepping up to help
Answer:	Thank you for sharing that feedback. The current health pandemic has resulted in a higher demand for PUR filters, leading some third-party sellers to take advantage of the situation. We at PUR have not increased our prices. We understand that consumers have enough on their minds and paying higher prices for our products should not be one of their concerns. We are disappointed by the situation and are working with Amazon to address it. We encourage you to report the seller of your product to Amazon.

Product description

The Philips Sonicare DiamondClean brush head gently lifts away stains to whiten teeth. Designed to work with all click-on Sonicare models, these replacement brush heads feature highly effective diamond-shaped bristles to whiten teeth in just 1 week and gently remove 7x more plaque than a manual toothbrush. Use with a Philips Sonicare BrushSync(TM) compatible handle (DiamondClean Smart or ProtectiveClean) to unlock Smart features: BrushSync mode-pairing triggers your handle to select optimal mode and intensity level for exceptional plaque removal (certain models only); BrushSync replacement technology tracks how often and how hard you brush and will notify you when it is time to replace your brush head. For best results, use genuine Sonicare Brush Heads with your Sonicare toothbrushes. They are designed to work together to provide optimal performance. No other replacement brush head claiming to fit Sonicare handles is clinically tested & proven to remove up to 100 percent more stains in 7 days than a manual toothbrush or to be safe and effective on your Philips Sonicare Toothbrush. Essential Oil Warning: Toothpaste containing essential oils can damage your brush head. Avoid direct contact with products that contain essential oils or coconut oil. Use may result in bristle tufts dislodging. Reminder bristles fade to let you know when it's time for replacement. Replace your brush head every 3 months as recommended by the American Dental Association. A fresh brush head every 3 months maximizes the effectiveness of Philips’ unique Sonicare technology.

• Suitable for these models: Diamond Clean, diamond Clean Smart, easy clean, essence+, flex care, flex care Platinum, flex care Platinum connected, flex care+ for kids, healthy white, healthy white+
• Includes: 2 W diamond Clean standard brush heads
• Helps improve gum health
• Removes up to 7x more plaque
• Whiter teeth in just 1 week

User questions & answers

Question:	Will these heads work in "clean" mode on the HX9957/51 or will they force the smart handle into "white+" mode
Answer:	Hello! You can manually change the mode regardless of which toothbrush head is attached to the Sonicare DiamondClean Smart. With the BrushSync technology, it will default to the correct setting based on the toothbrush head type.
Question:	Are these compact sonicare replacement snap on heads
Answer:	Hello! No, these are regular size Sonicare DiamondClean toothbrush heads.
Question:	I need to replace heads for HX6062, will these work
Answer:	Hello! Yes, the Sonicare DiamondClean will accept all snap-on replacement Sonicare heads.
Question:	Text describing brush head twice says "Sonicate." Is these authentic or a knock-off
Answer:	Hello! Yes, these are authentic Philips Sonicare DiamondClean replacement toothbrush heads model (HX6064/65). "Sonicate" appears to be a typo.

Product description

Coway Airmega AP-1512HH Filter Pack includes 1 HEPA filter and 2 carbon filters for odor control. The true HEPA filtration system is designed to capture 99.97% of airborne allergens as small as 0.3 microns in size, while the odor-eliminating carbon filters are designed to eliminate odors and gases from the air.

• Coway Airmega AP-1512HH's 1-Year replacement filter pack.
• 1 Year Replacement Pack: Includes 1 True HEPA filter and 2 carbon filters for odor control .
• True HEPA Filter: Designed to capture 99.97% of airborne allergens as small as .03 microns in size (12-Months average life-time).
• Carbon Filter: 2 carbon pre-filters designed to eliminate odors and gases from the air (6-Months average life-time)

User questions & answers

Question:	what does the ion button do? should it be on all the time
Answer:	Does the skin tag just falls off naturally after applying the patches?
Question:	Are you supposed to clean these in anyway to increase their lifespane? Remove and rinse out or wipe off at all
Answer:	Every day, but don’t take to long to falls off
Question:	This question is directed to someone with pets: Do you find that the life of the filters are basically cut in half
Answer:	Yes, after about two week of use, the annoying skin tags disappeared and there are almost no dents. I am very satisfied with this result.
Question:	This product doubled in price over the weekend. How is this not price gouging
Answer:	Mine is the pump. The lid twists to lock. I've never had any problem w/ it leaking during travel or when it has beeen knocked over or dropped.

Product features

Coway Replacement Filters for AP-1512HH

Order the essential 1 Year Replacement Filter Pack and let your Coway continue working to make the air you breathe more healthy and enjoyable.

The Coway Air Purifier comes with an indicator light that will inform you which filter needs to be replaced.

- 1 Year Replacement Pack: Includes 1 HEPA filter (replace once a year) and 2 carbon filters for odor control (replace every 6 months)

- True HEPA filter designed to capture 99.97% of airborne allergens and contaminants as small as .03 microns in size

- Carbon Filter designed to rid the air of larger particles and odors for refreshingly breathable air

Product description

1x Replacement 3.5mm gaming microphone with foam cover on mic plus 2x extra foam cover made specially for Corsair headsets. (Updated New Version Now Working On All Models)

The Mic Replacement has been made specially for your headset and we test every mic with our Corsair headset before sending it to you. We guarantee you that it will work. It is compatible with Corsair HS50 and HS60 HS70 and HS70 SE headphones. If you think your new mic won't fit or have any questions or concerns please contact us so we can help you. We can help you get your headset back working again so you can get back to gaming.

If your microphone stopped working and you receive our mic and it doesn't work there is a good chance that it is your headset that is defective. If you receive a mic that don't work please don't worry just send us an email we will help you get your mic working even if it means sending you a different mic if you bought the wrong one. Please contact us so we can help you.



TNE mics are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.



Included Items

1x Mic With Foam Cover Piece

2x Foam Cover Piece

TNE Packaging

• ✅ TNE Brand Mics: When buying a TNE product you know that you will always be getting the highest quality product; our mics are compatible with headphones for Xbox One, Xbox Series X, PS4, PS5, Nintendo and computer's
• ✅ Specially Made: Your mic has been made just for your model headset; Compatible With Corsair HS50, Corsair HS60, Corsair HS70 and Corsair HS70 SE headphones, Not compatible with any other headset
• ✅ Included Items: 1x 3.5mm game mic with foam cover piece plus 2 extra foam covers; TNE mics are developed as cost-effective alternatives to OEM parts
• ✅ High Quality: clear sound, bendable 360 degrees and will stay in place where you put it
• ✅ 100% Customer Satisfaction - We stand by the superior design, engineering and craftsmanship of our headphone accessories and support our customers with a 100% Money Back Guarantee

User questions & answers

Question:	Does this work with the HS
Answer:	There is no electric pump necessary. It works as any standard RV gravity feed toilet connected to RV water source. It requires a pressurized water source.
Question:	Does this work with hs
Answer:	It’s a porcelain bowl
Question:	does this work with hs
Answer:	The mole on my face has grown for several years. After using the product, about a week later, I peeled it off. It looks good! But continue to use the lotion, it disappeared. I am satisfied with the result

Product description

ZeroWater's 5-stage filtration technology removes 2x the TDS versus leading competitors. The 5-stage filter transforms your tap water into delicious, TDS-free drinking water. Get more out of your water with ZeroWater's 5- Stage Water Filtration.



5-Stage Filtration:



Stage 1 - Removes suspended solids such as dust and rust that make your water appear cloudy Stage 2 - Removes additional suspended solids Stage 3 - Removes organic contaminants; Mercury, Chlorine, Chloramine Stage 4 - Removes inorganic compounds i.e. metals, nonmetals and radiological contaminants. Stage 5 - Removes remaining suspended solids, holds the resin in place



What is TDS:



Total Dissolved Solids (TDS) refer to minerals, salts, metals including lead, chemicals, fluoride and runoff polluting your drinking water. ZeroWater Technology is the only water filtration system to remove 99% of TDS, equivalent to TDS in purified bottled water. Get more out of your water with ZeroWater's Premium 5-Stage Water Filtration.

• ZEROWATER REPLACEMENT FILTERS: Ensure you are drinking pure-tasting, cleaner water by replacing your Zero Water pitcher filters regularly. Our replacement filters fit in all Zero Water pitchers and water dispensers, from the smallest pitcher to the largest.
• FIVE STAGE WATER FILTRATION: Unlike many water filters & pitchers, Zero Water filters use 5 stages of filtration, to bring you cleaner, better tasting water. Instead of carbon filtering only, our filters use Ion Exchange Technology to reduce contaminants.
• NOT AN ORDINARY WATER FILTER: Zero Water filters filter water in 5 stages, are NSF certified to reduce lead and other heavy metals. Zero water removes 99. 6% of total dissolved solids, 2X more than the leading brand (tested by independent lab).
• GET MORE OUT OF YOUR WATER: Remove more impurities from your water with Zero Water's unique, 5 stage filter system. With a variety of options, you can have cleaner water anywhere, from pitchers, bottle filtration systems, or portable on-the-go cup filters.
• GET THE LEAD OUT: ZeroWater filters are the only pour-through filters NSF Certified to remove chromium & lead. Our pitchers, tumblers, & dispensers remove virtually all solids for the purest tasting water.
• Included Components: Activated Carbon Tourmaline Medical Stone Kdf Pp Cotton
• 5-stage dual Ion Exchange filter removes virtually all dissolved solids from tap water

User questions & answers

Question:	What is the shelf life of these replacement filters
Answer:	Thank you for your question. That would be a little too dense for the 508 Personal Rolling Trimmer to cut through. The 508 is a small personal craft trimmer designed for a few sheets of paper per pass. The laminated card stock would either stop the rolling head right in it's tracks, or cause the cutting head to "jump track" and come out of alignment.
Question:	I've been reading about unsealed filters. Are filters purchased through ZeroWater via Amazon sealed and therefore, uncontaminated
Answer:	I (windrider) take back my previous answer. My trimmer only came in inches. I thinking of another trimmer I have that has both metric and imperial measurements.
Question:	Does this filter fit the ZD-010 10-cup water pitcher
Answer:	Yes, it can trim them! From my experience (using THIS cutter for 15+ years) cutting delicate items, I use NONpermanent double sided tape and attach the delicate 'ads' to a piece of scrap paper (I use computer paper) lining up the edges. This gives you a way to hang onto the delicate ads/small pieces of paper you want to cut, giving them a straight edge. The scrap paper also gives the cutter something to hold to, rather than the delicate paper going thru alone. I cut delicate (re: old) newspaper, vintage doilies, vintage catalogs/books (early 1900's). If I can be of any more help please feel free to contact me. DO NOT try to use a Stampin'Up, Close to My Heart or other craft store cutters that are orange & clear & under $40?! Trust me, you will end up with shreds :( Phyllis E
Question:	how many months doest it work by one filter
Answer:	Haven't tried it yet

Product features

For Your Coffee or Tea

ZeroWater works harder to remove the most dissolved solids from your drinking water.

For Your Family

ZeroWater provides sparkling clear water you can trust for all of your family's needs.

For Your Furry Friends

ZeroWater works harder to remove the most dissolved solids from your drinking water.

For Your Home

Our 5-stage filtration system gives you the purest tasting water for your home.

Product description

Braun Pulsonic Series 7 70S Foil Head Shaver Head Replacement Foil and Blade Cassette, 9000 Series, Razors, Shavers, Cordless Shaving System

• World's # 1 Foil Shaver Brand
• Official Electric Shaver of the NFL
• Replacement head fits Braun Series 7 (720, 760, 790, 799 and 797)
• Shaver head should be replaced every eighteen months.
• Replacing your razor head gives a 25% better shave. For optimum performance; clean regularly.

User questions & answers

Question:	Does this fit 740s
Answer:	Yes, that item does fit on the 740s-6 shaver.
Question:	does this cassette fit series 7 model 790cc
Answer:	does this cassette fit series 7 model 720s-3
Question:	is my beard with it going to be soft a lot or how
Answer:	Beard how soft a lot and often, often soft how a lot for this beard. Mine too!
Question:	Does anyone know why the price has more than tripled in the last 6 months? Being discontinued? I bought one in July $31, now over
Answer:	I thought I should update this post, since now Amazon listed price was like $43+ and was keep watching it since I found Amazon puts in offer for $28+ so ordered 2 pcs, thought yet have not used the razor since bought it couple of weeks ago, better keep stick for a great deal, as I am fed up of Norelco though used it for 15 years but time to change to Braun seeing so many positive comments and posts.

Product features

Small investment, peak performance

Within 18 months, your Braun shaver will cut an average of 6,000,000 hairs. In accomplishing this substantial task, the cutting parts will gradually wear out and your shave may become less close and comfortable. That's why Braun recommends changing your shaver’s foil and cutter block every 18 months to maintain your shaver’s maximum performance. For an efficient shave every day.

How to replace your shaver head?

For older models which have a foil and a cutter block as two independent parts you will need to change the parts in two steps: First remove the foil, either by pressing the release button if your shaver has one, or by pulling the foil. Next rotate the cutter block by 90 degrees and pull it off, holding it at the ends to avoid touching the blades. To fit new parts, simply carry out the same procedure in reverse.