13 best ball joint press kits

Product description

Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of innovative products for home, garage and worksite. Founded in 1979, Alltrade is privately Held and maintains global sourcing, research, assembly and sales facilities to serve customers on every continent.

From the Manufacturer

Each kit includes step-by-step usage instructions and photos showing the tool in use. Instruction sheets are laminated to resist staining and are permanently fastened to the case. All instructions are developed by a professional repair manual writer. Kit 46 tools are for removing and installing most sizes of press-fit ball joints. Allows change out of ball joint without removal of the control arm. These tools can also be used to remove and replace U-joints. The set includes - 1 PC - PLUG: O.D. 7/8" 1 PC - RECEIVING TUBE: OD: 2-1/4", ID:2", 2"(L) 1 PC - INSTALLING TUBE: OD: 2", ID: 1-3/4", 3"(L) 1 PC - RECEIVING TUBE: OD: 2-1/2", ID: 2-1/4", 1-1/2" (L) 1 PC - RECEIVING CUP: OD:2 -1/4", ID: 1-7/8", 7/16" (L) 1 PC - RECEIVING TUBE: OD:2 1/2", OD: 2-1/4", 3/4" (L) 1 PC - RECEIVING TUBE: OD:2-7/16", I.D:2-3/16", 3-3/16"(L) 1 PC - REMOVER/INSTALLER: OD:1-7/16", I.D:3/4", 1" (L) 1 PC - INSTALLING TUBE: OD: 2", ID: 1-3/4", 2-5/16" (L) 1 PC - RECEIVING CUP: OD: 2-1/8:, ID: 1-3/4", 1/2" (L) 1 PC - RECEIVING TUBE: OD: 2-1/2", ID: 2-1/4", 2-3/4" (L) 1 PC - RECEIVING TUBE: O.D.: 3", ID: 2-3/4", 2-1/4" (L) 1 PC - RECEIVING TUBE: O.D.: 2-3/4", ID: 2-7/16", 2-1/4"(L) 1 PC - RECEIVING TUBE: OD: 2-7/8", ID: 2-5/8", 2-7/8" (L) 1 PC - SCREW 1 PC - C-FRAME 1 PC - RECEIVING TUBE: 1-3/4" X 2" 1 PC - RECEIVING TUBE: 2-1/4" X 2-1/2" 1 PC - RECEIVING TUBE: 2-3/4" X 3" 1 PC - REMOVAL ADAPTER 1 PC - INSTALL ADAPTER 1 PC - 3/4"DR. X 1-59/64". 2"(L) 1 PC - 3/4"DR. X 2-9/64". 2"(L) 1 PC - BLOW MOLDE CASE

• Harm Bal/ crank PULLEY P
• Tool solutions for most all situations
• Built to exceed tool standards
• Designed to help you remove and install press-fit type ball joints without taking the control arm off the vehicle
• Kit services: most Domestic and import rear wheel drive vehicles
• Remove and install pressed-in Ball Joints found on most vehicles
• Remove and install special threaded upper Ball Joints found on many Chrysler vehicles

User questions & answers

Question:	Hi, can anyone confirm this will work with a 2000 wrangler for Ball joints? Thanks
Answer:	This is a universal kit it should work I bought one couple years back saved me so much money so far it actually paid for itself twice
Question:	What size socket is needed to drive the screw
Answer:	It uses a 7/8" socket, and a breaker bar would help you alot too. If you own a shop then this is perfect, if not and just want to service your own car do make sure that the ball joints on your car are pressable (NOT PERMANENTLY PRESSED - you'd just have to replace the whole control arm and not need this kit)
Question:	Is it made in the usa
Answer:	Don't know and can't see any 'Made in the USA' stampings on the components. All I know is that it's built very well, it's strong, and does the job without any problems. Configuring the components to press in/out is a challenge, but I was able to get it to work as advertised. There is a manual that comes with the kit to help out with the configurations. I would definitely recommend this kit!
Question:	will it service a dodge 2500. 2006 yr
Answer:	It should service all pressed ball joints

Product features

Powerbuilt 23 Piece Ball Joint & U-Joint Service Kit

Replacing ball joints is time-consuming enough without having to disassemble half the car to reach them. This innovative tool set is designed to save time and frustration by helping you remove and install press-fit type ball joints without taking the control arm off the vehicle. This set can also be used for removing or installing U-joints. Strong and dependable enough to last a lifetime.

Kit Services: Most domestic and import rear wheel drive vehicles

Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy-duty design ensures it will stand up to years of use and abuse.

• Removes and installs press-fit type ball joints without taking the control arm off the vehicle. This set can also be used to remove and install U joints.
• Durable storage case with step-by-step instructions

Set includes:

• receiving tube 2-7/8" OD x 2-7/8" L
• receiving tube 2-7/16" OD x 3-3/16" L
• installing adapter 2" OD x 3" L
• receiving tube 2-3/4" OD x 2-1/4" L
• receiving tube 2-1/4" OD x 2" L
• receiving tube 2-1/2" OD x 1-1/2" L
• installing/removing adapter 3-1/16" OD x 1-1/8" L
• installing adapter 3" OD x 1-1/8" L

• Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints.
• Excellent for removal and installation of press-fit parts such as ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• Allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle.
• Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.

User questions & answers

Question:	does this have the angle cup
Answer:	These tools fit most compact cars, mid-size cars, and light pickup trucks. You could make sure whether it is compatible with your vehicle or not according to the jaw opening & pull travel of each part. Thank you.
Question:	Would this set also work for bushing removal
Answer:	Lol that's the best one iv heard all year and with that being said really use your brain I brought all the ball joint press from a friend who had it for 35 years I walked away from one second to cut out a half moon out of a bearing race to make it work for the lower arm and my friend decided to pull my Jack handle out and put it on the breaker bar on the ball joint press while I was inside grinding let alone $1,400 later I found an original one on eBay and replaced my buddies because of my buddies no buddies but my buddies pay my buddies lol wait what? Keilth tools I believe can't spell
Question:	where is it made
Answer:	Yes, it should work fine. Used this set for several different years of gm trucks so far. Be sure and oil the screws before you use them or it will eat the threads out of the aluminum.
Question:	Does it fit Chevy
Answer:	Yes works on most dodge tucks overhauled my 06 front end with it

Product features

Adjust Anchor Pins

Dis/Assemble a U Joint

Remove a Ball Joint

Installation a Ball Joint

Specifications:

Package Quantity: 10 pieces

Tools Material: Carbon steel

Surface: black-oxide finish

Suitcase Material: ABS plastic

Package Dimensions: 11” x 3” x 15” in.

Package Weight: 16 pounds

Compatibility:Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars, The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).

Part Description:

A. Receiving Tube(2-1/4" L x 2.723"I.D. X 3" O.D.)

B. Receiving Tube(1-3/4" L x 2-1/4"I.D. X 2-1/2" O.D.)

C. Receiving Tube(1-3/4" L x 1-3/4"I.D. X 2" O.D.)

D. Installation Adapter(1.122" L x 0.941"I.D. x 3" O.D.)

E. Removal Adapter(1.148" L x 1/2" I.D. x 3" O.D.)

F. Jackscrew

G. Install Cup Adapter(0.845" L x 1.879" I.D. x 2-1/4" O.D.)

H. Ball Joint Press

I. Reciving Cup(2-1/2" L x 2" I.D. x 2-1/4" O.D.)

J. Installing Cup (3.676" L x 1-3/4" I.D. x 2"O.D.)

• ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle
• PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
• CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.
• ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.

User questions & answers

Question:	will this work on a 2003 honda element lower ball joint
Answer:	I am not sure if it has a lifetime warranty.
Question:	Will this product work on a 2007 jeep liberty sport
Answer:	Please note that this tool kit is perfect for most compact cars, mid-size cars and light pickup trucks. It is not for a VW bus T2.
Question:	Does this kit have all the adapters you need t remove and install upper and lower ball koints on a 2012 ram 2500 4X
Answer:	Sorry, it won't fit.
Question:	Where is this made
Answer:	I don't know but the tools look exactly like some much older ones that I have that are made by KD so it's hard to say

Product features

Practical and Professional Tool Set

This ball joint press removal tool kit is enclosed inside a heavy-duty ABS portable carry case for safe storage and easy access. Quickly keep your tool set organized.

Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and pickup trucks that have press-fit type ball joints.

Heavy-duty Steel Workmanship

Constructed with heavy-duty forged solid carbon steel to easily endure a lifetime of wear and tear.

Premium Impervious Finish

Coated with a rust-resistant black oxide finish to cut out corrosion and keep you working until the job is done right.

Indispensable C-Clamp

The C-Clamp is essential for U-joints and makes removing and installing all ball joints a much easier process.

Intuitive Craftsmanship

Designed with interlocking and interchangeable attachments for an effortless removal/install process.

Package Content:

Ball Joint Remover -- A C-Frame Press -- U Installer -- Q Installing Adapter -- N Installing Cup -- C, H Live Center Forcing Screw Plug -- S

Receiving Cup -- F, P, I Receiving Tube -- D, E, G, J, K, L, O Remover -- R Remover Cup -- B Removing Adapter -- M

C Frame Screw

Receiving Tube 2-1/4" X 3" Receiving Tube 1-3/4" X 2-1/2 Receiving Tube 1-3/4" X 2"

Install Adaptor Remover Adaptor

Center Plug O.D. 7/8"

Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 3/4" Receiving Cap Adaptor O.D. 2-1/4", I. D. 2" Length 2"

Remover Installer O.D. 1-7/16", I. 3/4" Length 1" Receiving Cup O.D. 2-1/2", I. D. 1-1/4" Length 1-1/2"

Receiving Tube O.D. 2-3/4", I. D. 1-7/16" Length 2-1/4" Receiving Tube O.D. 3", I. D. 2-3/4" Length 2-1/4"

Receiving Cup O.D. 2-1/4", I. D. 2" Length 2" Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 2-3/4"

Installing Cup O.D. 2", I. D. 1-3/4" Length 2-5/16" Receiving Cup O.D. 2-7/8", I. D. 2-5/8" Length 3-7/8"

Receiving Cup O.D. 2-7/16", I. D. 2-3/16" Length 3-3/16" Install Cup O.D. 2", I. D. 1-3/4" Length 3"

• ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
• UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
• CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
• ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.

Product features

Part Dimensions

A __ Receiving Tube (2-1/4" L x 2.723" I.D. x 3" O.D.)

B __ Receiving Tube (1-3/4" L x 2-1/4" I.D. x 2-1/2" O.D.)

C __ Receiving Tube (1-3/4" L x 1-3/4" I.D. x 2" O.D.)

D __ Removal Adapter (1.148" L x 1/2" I.D. x 3" O.D.)

E __ Installation Adapter (1.122" L x 0.941" I.D. x 3" O.D.)

F __ Screw

G __ Install Cup Adapter (0.845" L x 1.879" I.D. x 2-1/4" O.D.)

H __ Forcing-screw Press

I __ Receiving Cup (2-1/2" L x 2" I.D. x 2-1/4" O.D.)

J __ Installing Cup (3.676" L x 1-3/4" I.D. x 2" O.D.)

• EASY OPERATION: The ORION MOTOR TECH Ball Joint Press Set with 4x4 Adapters effortlessly removes press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
• UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
• PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
• ALL-IN-ONE TOOL SET: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
• PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.

Product features

Part Dimensions

A __ Receiving Tube (2-1/4" L x 2.723" I.D. x 3" O.D.)

B __ Receiving Tube (1-3/4" L x 2-1/4" I.D. x 2-1/2" O.D.)

C __ Receiving Tube (1-3/4" L x 1-3/4" I.D. x 2" O.D.)

D __ Removal Adapter (1.148" L x 1/2" I.D. x 3" O.D.)

E __ Installation Adapter (1.122" L x 0.941" I.D. x 3" O.D.)

F __ Screw

G __ Install Cup Adapter (0.845" L x 1.879" I.D. x 2-1/4" O.D.)

H __ Forcing-screw Press

I __ Receiving Cup (2-1/2" L x 2" I.D. x 2-1/4" O.D.)

J __ Installing Cup (3.676" L x 1-3/4" I.D. x 2" O.D.)

• EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
• UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
• PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
• ALL-IN-ONE TOOL KIT: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
• PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.

User questions & answers

Question:	Honda civic Dx? Does it fit those tiny ball joints
Answer:	3/4
Question:	Does this ball joint kit work on a 2005 Dodge Ram 2wd
Answer:	Technically, yes, but not on Amazon. Also, the bigger ones won't work on your outback, because they are too big. I suspect you are using it wrong - I've never found any car it won't work on, even stuff with much larger u-joints than yours.
Question:	How big is the opening from end to end on the clamp
Answer:	The opening is 7/8"
Question:	Does this have the angled cup for the Jeep knuckles
Answer:	It wasn't big enough for my Subaru, so it's unlikely it'll work on a truck.

Product features

Part Dimensions

A __ Receiving Tube (2-1/4" L x 2.723" I.D. x 3" O.D.)

B __ Receiving Tube (1-3/4" L x 2-1/4" I.D. x 2-1/2" O.D.)

C __ Receiving Tube (1-3/4" L x 1-3/4" I.D. x 2" O.D.)

D __ Removal Adapter (1.148" L x 1/2" I.D. x 3" O.D.)

E __ Installation Adapter (1.122" L x 0.941" I.D. x 3" O.D.)

F __ Screw

G __ Install Cup Adapter (0.845" L x 1.879" I.D. x 2-1/4" O.D.)

H __ Forcing-screw Press

I __ Receiving Cup (2-1/2" L x 2" I.D. x 2-1/4" O.D.)

J __ Installing Cup (3.676" L x 1-3/4" I.D. x 2" O.D.)

• EASY OPERATION: Use our 22PCS Ball Joint Press Set with multi-size adapters to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• UNIVERSAL COMPATIBILITY: This tool set works with most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, or vehicles with the Dana 28, 30, 35, 44, 60 axles.
• PROFESSIONAL-GRADE DURABILITY: Built to last with heavy-duty forged carbon steel with anti-rust black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion.
• ALL-IN-ONE TOOL KIT: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tubes, 1x Removal Adapter, 1x Screw, 1x Sleeve.
• PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty ABS plastic blow-molded carrying case with handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.

User questions & answers

Question:	Will this fit a ball joint on a 1999 Escalade
Answer:	I dont know it didnt fit the bottom ball joints on my dodge ram 2500 but it did fit the top ones so its half of what I needed.
Question:	Will this fit a 1999 Escalade
Answer:	I dont know it fit the top ball joints on my dodge ram 2500 but not the bottom ones so good luck.
Question:	Will this fit jeep cherokee aor do i need to purchase a jeep adapter kit
Answer:	I just replaced my ball joints on a WJ 2000 Jeep grand Cherokee with this tool.
Question:	Is there a warrant
Answer:	Like an arrest warrant?

Product features

Practical and Professional Tool Set

This ball joint press removal tool kit is enclosed inside a heavy-duty ABS portable carry case for safe storage and easy access. Quickly keep your tool set organized.

Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and pickup trucks that have press-fit type ball joints.

Heavy-duty Steel Workmanship

Constructed with heavy-duty forged solid carbon steel to easily endure a lifetime of wear and tear.

Premium Impervious Finish

Coated with a rust-resistant black oxide finish to cut out corrosion and keep you working until the job is done right.

Indispensable C-Clamp

The C-Clamp is essential for U-joints and makes removing and installing all ball joints a much easier process.

Intuitive Craftsmanship

Designed with interlocking and interchangeable attachments for an effortless removal/install process.

Package Content:

Ball Joint Remover -- A C-Frame Press -- U Installer -- Q Installing Adapter -- N Installing Cup -- C, H Live Center Forcing Screw Plug -- S

Receiving Cup -- F, P, I Receiving Tube -- D, E, G, J, K, L, O Remover -- R Remover Cup -- B Removing Adapter -- M

C Frame Screw

Receiving Tube 2-1/4" X 3" Receiving Tube 1-3/4" X 2-1/2 Receiving Tube 1-3/4" X 2"

Install Adaptor Remover Adaptor

Center Plug O.D. 7/8"

Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 3/4" Receiving Cap Adaptor O.D. 2-1/4", I. D. 2" Length 2"

Remover Installer O.D. 1-7/16", I. 3/4" Length 1" Receiving Cup O.D. 2-1/2", I. D. 1-1/4" Length 1-1/2"

Receiving Tube O.D. 2-3/4", I. D. 1-7/16" Length 2-1/4" Receiving Tube O.D. 3", I. D. 2-3/4" Length 2-1/4"

Receiving Cup O.D. 2-1/4", I. D. 2" Length 2" Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 2-3/4"

Installing Cup O.D. 2", I. D. 1-3/4" Length 2-5/16" Receiving Cup O.D. 2-7/8", I. D. 2-5/8" Length 3-7/8"

Receiving Cup O.D. 2-7/16", I. D. 2-3/16" Length 3-3/16" Install Cup O.D. 2", I. D. 1-3/4" Length 3"

• ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
• HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
• UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
• PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
• ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

User questions & answers

Question:	Will these work on 06 Jeep Wrangler
Answer:	It should be able to
Question:	What is the warranty for this
Answer:	Yes it should.
Question:	Would this kit work for an 01 Chevy Blazer 2 - door
Answer:	well i have not tried in on a truck yet. the info on the page says dodge 4x4 trucks, so i would believe that it does.. good luck
Question:	Will this work on my 03 Dodge 3500 diesel 4 wheel drive
Answer:	It should

Product features

Package Content

1x Ball Joint Separator

1x Tie Rod And Ball Joint Remover

1x Conical Pitman Arm Puller

1x Pitman Arm And Tie Rod End Puller

1x Pitman Arm Puller

Pitman Arm and Tie Rod End Puller

This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure grip in tight work spaces.

1-1/8" jaw spread, 2-1/8" throat depth

Pitman Arm Puller

This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.

1-11/32" jaw spread, 2-1/2" throat depth

Conical Pitman Arm Puller

Designed to fit securely on Pitman arms for compact and mid-size cars.

3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.

Ball Joint Separator

For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints

1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity

7/8" jaw spread, 2-1/4" throat depth

Tie Rod and Ball Joint Remover

A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.

0 to 2-1/2" jaw spread, 3-1/4" throat depth

• SERVICE YOUR VEHICLE: Keep your suspension system running smoothly by replacing worn ball joints with the ABN Ball Joint Removal Tool and Bushing Press Kit; 10 piece ball joint tool kit includes receiver tubes and adapters to work on most press-fit upper and lower ball joints
• REMOVE PARTS EASILY: Remove worn, rusted, and corroded parts with this ball joint remover kit; Works as a ball joint separator tool, u joint press, tie rod end remover tool, and suspension bushing removal tool
• PACKAGE CONTENTS: Ball joint removal kit includes C-frame ball joints press and forcing screw, installation adapters with cups, removal adapters with cups, receiver tubes (2.75 x 3 inch, 2.25 x 2.5 inch, and 1.75 x 2 inch)
• BUILT TO LAST: Heavy-duty forged steel provides maximum strength and durability, while the black-oxide finish helps to resist rust and corrosion; Designed to fit most domestic and imported 2 wheel drive (2WD) and 4 wheel drive (4WD) cars and light trucks with press-fit type ball joints
• CONVENIENT STORAGE: 11 x 3 x 15 inch (27.9 x 7.6 x 38.1cm) plastic blow-molded carrying case with handle provides safe storage, quick organization, and easy transportation

User questions & answers

Question:	Work for kia forte 2011 LX
Answer:	Si
Question:	Does it fit on dodge 3500 4x
Answer:	I used it to change the ball joints on my 2005 dodge ram 2500 4x4. It did work, but it was a little tight, we had to improvise a little bit when pressing out the old joints. you will want to have a couple of spare steel plates or big washers to help when space is tight.
Question:	Will it work on a 2000 Toyota Tundra 4x
Answer:	Yes did one couple of days ago
Question:	What is the inside dimension of the C Clamp
Answer:	measures 6 1/2 -2 incehes on the inside

Product features

About ABN 4023 Ball Joint Service Tool Kit with 4-Wheel Drive Adapters

The ABN Ball Joint Service Tool Kit with 4-wheel Drive Adapters provides everything you need to service ball joing on most 2WD and 4WD vehicles. Designed for the easy removal of press fit parts including ball joints, brake anchor pins, and more. This kit includes a C-frame press and installation and removal adapters, along with 3 receiver tubes in different sizes.

• C-frame press
• Install and removal adapters
• 2-3/4" x 3" receiver tube
• 2-1/4" x 2-1/2" receiver tube
• 1-3/4" x 2" receiver tube

A Closer Look

Product description

The OEMTOOLS 25104 21 Piece Master Ball Joint Service Kit installs and removes ball joints, U-joints, and brake anchor pins on 2-wheel drive (2WD) and 4-wheel drive (4WD) cars, SUVs, and light-duty trucks. This ball joint puller set comes with necessary adapters for removing ball joints on GM, Ford, and Chrysler 2WD and 4WD vehicles. Designed with technicians in mind, our ball joint remover and installer kit also includes additional adapters with specialized cut-outs that fit or maneuver around obstructions found on many common vehicle makes and models. Each specialized ball joint press adapter saves you time and effort by making your job quick and easy. The ball joint C clamp is constructed with a heavy duty forged steel alloy for the toughest pressing jobs, making this ball joint press tool kit ideal for removing seized joints. Our master ball joint adapter set comes in a durable blow-molded case for easy storage, portability, and safe keeping. This OEM ball joint press kit offers the thoughtful design, accessories, and convenience you need in a widely useful 2WD and 4WD ball joint press kit.

• BALL JOINT REMOVAL KIT: Our ball joint tool kit installs and removes press-fit upper and lower ball joints on 2-wheel drive and 4-wheel drive vehicles; Ball joint removal tool also works as a U joint removal tool and a brake anchor pins removal tool
• WORKS WITH VARIOUS MODELS: This ball joint puller tool includes adapters for removing upper and lower ball joints on GM, Ford, and Chrysler 2-wheel drive and 4-wheel drive light-duty trucks, vans, and SUVs
• MANEUVERS AROUND OBJECTS: The adapters in this ball joint remover kit feature specialized cut-outs that are designed to fit or maneuver around obstructions found on many common makes and models, saving you time and effort
• HEAVY DUTY BALL JOINT PRESS: Our ball joint separator kit has a C-frame that is constructed with a durable steel alloy for the toughest ball press jobs, making this ball joint tool set ideal for removing seized joints
• CONVENIENT STORAGE: This ball joint kit comes in a sturdy blow-molded case for secure storage in your garage or auto shop until you need it; Easily take your ball joint adapter kit with you from job to job

Product features

OEMTOOLS 25104 21 Piece Master Ball Joint Press Kit

The OEMTOOLS 21 Piece Master Ball Joint Press Set installs and removes ball joints, U-joints, and brake anchor pins on 2-wheel drive (2WD) and 4-wheel drive (4WD) cars, SUVs, and light-duty trucks. This kit comes with the adapters you need for removing ball joints on GM, Ford, and Chrysler vehicles.

Our ball joint press set makes it possible to maneuver around obstructions found on many common vehicle makes and models, making it easier to remove ball joints on more vehicles than with other ball joint press tools.

Save time and effort with this master ball joint press tool set.

The Ultimate Ball Joint Press Kit

This ball joint installer and removal kit offers the design, accessories, and convenience you need to install or remove the toughest ball joints.

Our kit is thoughtfully designed to make it easier to get the job done, including a heavy-duty C-frame that is ideal for the most difficult jobs.

The 21 piece set also comes in a case with adapters for wide compatibility with a large number of vehicles.

And the storage case makes it simple to store the ball joint press and its accessories, and to take it wherever you need it.

Replace Ball Joints

This ball joint kit makes quick work of removing and replacing press-fit upper and lower ball joints on 2-wheel drive and 4-wheel drive vehicles.

Widely Useful

Our ball joint removal set includes adapters for removing upper and lower ball joints on GM, Ford, and Chrysler light-duty trucks, vans, and SUVs.

Specialized Cut-Outs

This set comes with adapters that feature specialized cut-outs to fit or maneuver around obstructions commonly found in many makes and model.

Durable Material

The upper and lower ball joint tool kit includes a heavy-duty forged steel alloy C-frame that is ideal for the toughest jobs, such as removing seized joints.

Product description

Features:



Ball joint service tool kit is designed to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.



Forged C-frame press alone can be used to remove and replace universal joints.



Servicing most American domestic and imported 2WD/4WD car and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (Fit for Ford, GM, Dodge, IHC and Jeep vehicles).



The ball joint press removal tool kit fits for most vehicles, cars and light trucks, and it will help remove & install ball joint bearings without the need to remove the control arm from the vehicle, easy to operate



Equipped with blow-molded storage box, keeps the tools well organized and easy to access, allows for convenient storage and carry



Specification:



Item Type: Ball Joint Service Tool Set



Condition: 100% Brand New



Material: Carbon Steel



Quantity: 21pcs







Package List:



1 x Red Plastic Box



16 x Iron Sleeve Adapter



1 x U Clip



2 x Discus Adapter



1 x Screw



1 x Iron Rod Adapter



1 x Manual

• 【Widely Used】: This ball joint removal kit is designed to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle
• 【Comes with a Box, Easy to Store and Carry】: The blow molded case of the ball joint service kit keeps tools securely organized for conveniently transport
• 【High Quality】: The ball joint repair kit is made of heavy-duty steel and is plated with black oxide on the adapter; It has the greatest strength and life, and can resist rust and corrosion; An ideal choice for professional mechanics
• 【C-frame, Easy to Remove and Replace Universal Joints】: Forged C-frame press alone can be used to remove and replace universal joints
• 【A Tool Set for Car Light Truck Repairing】: The ball joint service tool set Service most American domestic and imported 2WD/4WD car and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 fr

Product description

Feature:



The Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle

Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion

Heavy duty forged C clamp set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins.



Package include:

3x Receiving Tube

1x Removal Adapter

1x Installation Adapter

1x Screw

1x Install Cup Adapter

1x Forcing-screw Press

1x Receiving Cup

1x Installing Cup



Operation Guide:

1.Remove all lock ring retainers from the brake anchor pins.

2.Position the C-frame press over the brake spider.

3.Tighten the forcing screw until the anchor pin is removed.

• The Ball Joint Press Set Ball Joint Tool with 4WD Adapter can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle
• Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
• Compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints
• Include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle.
• Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup

Product description

Astro Pneumatic's 7897 Ball Joint Service Tool and Master Adapter Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes in blow molded carrying case, keeping the tools organized and easy to transport.

• Removes and replaces press-fit upper and lower ball joints
• Forged C-frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles
• Blow molded case keeps the tools organized and easy to transport

User questions & answers

Question:	will tis kit work on a 2010 f250 superduty for ball joints and trackbar joint
Answer:	Yes I have used it on f250 f350 f450 and f550 from 1990 all the way to 2018
Question:	what are the dimensions of the C clamp? also what is the length of rod itself
Answer:	about the same as any other kit out there. not really big enough. none of them are. also you will find yourself using a 6 foot cheater bar on your ratchet. In my opinion, if you can sneak it past your wife. Get this kit. Then go buy the $129 12 ton press at harbor freight.
Question:	Will this work for lower ball joints on a 2000 ford crown victoria
Answer:	as long as it's the pressed in type ball joint, Yes.
Question:	ball joint press. will it work on a 2003 chevy silverado 1500 4x
Answer:	it should. i used it on a 2004 f150 lightning and had no problems and it does have the extensions included for all types of 4x4s. hope this helps

Product features

Ultra Duty C-Frame & A Wide Range Of Applications

From passenger vehicles and FWD applications to 4WD large trucks and equipment, the 7897 Master Kit includes all the adapters Astro makes and features our maximum duty C-frame for use with the most powerful 1/2" impacts on the market.

For Removal & Installation

Adapters designed to both install new and receive old pressed out ball joints.

New Forged Alloy

Constantly being rengineered to stay ahead of today's most powerful impact wrenches, Astro's newest 7897-01 C-frame could support a hanging fully loaded 18-wheeler without resulting in damage.

Custom Adapters For Difficult Spots

Includes adapters with cut-outs to navigate around control arms that are in the way. Most adapters either work with or can be modified to work on your application.

Other Popular Ball Joint Tools By Astro

Condensed ball joint set with common universal adapters.

Model no. 7865.

Other Popular Ball Joint Tools By Astro

Additional adapters for the 7865 (already included in 7897 Master Set).

Model No. 7868.

Other Popular Ball Joint Tools By Astro

Pickle Forks For Ball Joint Separating.

Model No. 78807.