11 best astro pneumatic tool tires

Product description

The Astro 3018 3.5" Digital Tire Inflator with Hose boasts a durable 21” stainless steel braided hose for increase durability and an easy to install AAA Battery System for 4X the battery life. Inflate, deflate and measure in KG, PSI or BAR with maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System). This unit is designed with a large face backlit LCD digital read-out and is covered with a rubber sleeve for extra comfort and durability. Specifications: Measuring Range: 3 ~ 175PSI, Units: PSI/BAR/KPA/KGF, Resolution: 0.1 PSI, Accuracy: 0 – 58 psi +/- 1.2 PSI, 59 – 174 psi +/- 1.2 PSI, Working Temperature: 32°F~104°F (=0°C~ 40°C), Power: AAA Batteries, Battery Lifetime: 560hr

• New dual AAA battery powered design. 4X the battery life and simplified battery installation.
• New 21” Stainless braided hose for increased durability
• Maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System)
• Displays KG, PSI or BAR measurement
• Large face backlit LCD digital read-out
• Unit covered with rubber sleeve for extra comfort and durability
• Two position lever. 1st position deflates, 2nd position inflates.

User questions & answers

Question:	What batteries does it use
Answer:	4-24-16 The one I received today IS the updated version with the steel mesh hose and 2 AAA batteries. Also, simplified battery installation/replacement procedure. Simply peel back the rubber cover, pry open battery compartment door, install batteries, replace compartment door and re-seat rubber cover.
Question:	Can this gage be used with the air hoses you find at many gas stations
Answer:	Everyone else has given you the common answer, which is no. But if you're a traveler, and you wanted to use this at gas stations, then you could add this: http://www.amazon.com/Amflo-701-2-npt-tank-valve/dp/B0002V4Q4I/ref=sr_1_8?ie=UTF8&qid=1410808589&sr=8-8&keywords=schrader+valve+adapter Then clip the gauge hose on your tire, and hold the station hose on the end of the gauge and that would work. Although maybe not real comfortable to do.
Question:	can the air chuck be replaced by a dual one, and if so what model
Answer:	Yes, the black air hose that is attached to this unit has 1/4" NPT on both ends and fits standard accessories. It appears that any of the Milton dual head air chucks will fit as they are furnished with female 1/4" NPT.
Question:	Does this unit hold and seal the tire stem well? The clamp looks the cheap one that doesn't stay on the valve stem
Answer:	Put on correctly, it seals and will hold air...it is not a cheap fitting. I have used mine to check tire pressure even without an air hose hooked up when I was just checking.

Product features

The Industry Leader: Rugged and Precise Design

The 3018 redesign boasts the most durable steel braided hose and easy to install AAA Battery System on the market. Inflate, Deflate and Measure in KG, PSI or BAR with maximum accuracy and 0.1psi resolution for use with TPMS. (Tire Pressure Monitoring System).

Easy To Install Battery Port

4-times the battery life of other popular models and no disassembly of product required. Simply peel back the rubber sleeve and pop off the cover.

Durable Steel Braided Hose

Now with new rubber bend guard for increased durability where its needed, Astro's long lasting flexible braided stainless hose is a popular feature.

Lock-On Air Chuck

Heavy duty brass chuck clips and holds onto valve stem for easy, one-hand operation.

Product description

The Astro Pneumatic 3081 - Dial Gauge Tire Inflator's construction features an aluminum die-casted unit covered with a rubber sleeve for extra comfort and durability. The dial gauge feature is clear and easy to read. The unit has a 3-in-1 function that inflates, deflates and measures tire pressure. Also features a two position measurement with inflate/deflate level. Increased safety and reduced tire-related incidents. 80mm pressure gauge (0-12 Bar/174Psi). The unit includes a 21" hose.

• 3 in 1 function: inflate, deflate and measure tire pressure with two position inflate/deflate lever
• Aluminum die-casting unit covered with rubber sleeve for extra comfort and durability, Clear and easy to read
• Increased safety and reduced tire-related incidents
• Includes new 21-Inch stainless hose with bend guard, unit has 3-1/8-Inch (80mm) pressure gauge (0-12 Bar/174Psi)

User questions & answers

Question:	How do you calibrate needle? I have been using this for about 2 months and its already 7-8 psi off
Answer:	It comes with a 1/4” NPT threaded coupler, to use with an air hose. I guess you could plug it into a compressor directly?
Question:	where is this made
Answer:	The brass chuck slides right over the tire valve. Just depress the small metal lever, slide onto the valve, release the lever, and you’re all set to inflate or deflate.
Question:	Can you easily replace the supplied connect with a round chuck instead? I have tire stems that can only be filled by a round chuck, due to location
Answer:	I dont recall the origin but it is a quality inflator with a good warranty, if American made is a must try powertank tire inflator
Question:	I frequently check and adjust the air pressure on semi trailers, about 40 tires a day, how durable and accurate is this product
Answer:	I had no leaks at any stage,

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• Gauge is up to 2X the accuracy of the B40.1 ANSI standard with larger 2.5" diameter face for finer resolution and easier to see readings
• 0-160psi range to allows for high pressures from the compressor without damaging gauge display
• Pressure bleed valve button releases pressure from the tire to your desired range or clears display after checking pressure with dual chuck
• Includes 15” swivel hose, dual chuck, locking chuck, and “M” & “T” style air fittings with thread sealant

User questions & answers

Question:	What country is it made
Answer:	About 21cm(L)*21cm(W)*3cm(H) when folded up
Question:	what is the normal operating temperature range for this tool
Answer:	Mesh and washable polyester fabric,not plastic:)

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• New Flank Bite design works on up to an industry leading 90% rounded lug nut
• Protective sleeves free spin instead of scuffing wheels, allowing sleeves to remain in place while sockets rotate
• Also safe for forward tightening of lug nuts without damage

User questions & answers

Question:	Lifetime warranty
Answer:	We recommend a powerful inflator/deflator
Question:	What type of metal is used when making these sockets
Answer:	This is meant to be used for balls as a ball pit.
Question:	can it remove mcguard locking lug that has lost the key
Answer:	Sounds crazy but about at least 1,000 if not more. I bought around 400 balls and it didn't look like much but the kids were happy. Great product.
Question:	What size drive are these
Answer:	The material is heavy and very durable. This ball pit gets heavy use on a weekly basis at our center for kids with disabilities and it remains intact. It would take some effort to puncture it with an every day object.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• 8pc set includes common torque limits and socket sizes for wheel mounting
• Lug Nut sockets feature protective sleeves and inserts to prevent wheel
• Color coded for quick reference
• 4 Torque Limiting Extensions: 90 100 110 and 120ft/lbs
• 4 Protective Lug Nut Impact Sockets: 17mm, 19mm, 21mm, and 7/8”, 1/2" Drive

User questions & answers

Question:	Do these come in a case
Answer:	Only the 10 surprise balls open. The rest are regular ball pit balls.
Question:	Can I use my own sockets instead of the plastic sleeve ones? And get the torque as needed
Answer:	Our figure packs are approximately 50% PVC 40% ABS and 10% PP.
Question:	One of my sockets broke and I lost the warranty info. How do I go about an exchange
Answer:	Any air mattress pump or you may blow the ball pit up manually
Question:	Since the fit in the wheel can be an issue, please list the outer diameter of each socket? Seller! Anyone
Answer:	The inflatable Blippi Ball Pit is 7" height by 34" in diameter.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• 7 in 1 Design
• Hidden Spring Mechanism
• Made from Precision Forged CR-V
• Length: 10"

Product description

The Astro 3082 TPMS Dial Tire Inflator W/Stainless Hose - 0-65psi is constructed with a detailed high resolution dial face perfect for TPMS or any use where accurate readings are required. It is built for extreme accuracy with up to 260 percent more accurate than the ANSI standard, and includes a stainless braided hose (21") for maximum durability. The solid aluminum body is covered with a rubber sleeve for extra comfort and durability, and the 3 in 1 function allows the user to inflate, deflate and measure tire pressure. The tool has a two position inflate/deflate lever, and works with CO2 and Nitrogen. 3-1/8" (80mm) pressure gauge (2-65psi read). SPECIFICATIONS: Measuring Range: 0-65psi Units: PSI Resolution: 1psi Accuracy: +/- <1psi or +/- 1.5 percent Optimal Working Temp.: 32-104F.

• Detailed high resolution dial face perfect for TPMS or any use where accurate readings are required
• Extreme accuracy. Up to 260 percent more accurate than the ANSI standard
• Solid aluminum body covered with rubber sleeve for extra comfort and durability; Stainless braided hose (21") for maximum durability
• Can take up to 200psi from the compressor, displays up to 65psi from the tire
• Two position inflate/deflate lever; Works with CO2 and Nitrogen

User questions & answers

Question:	How does the inflate/deflate lever work
Answer:	I think so but double check
Question:	Where is it made? Thank you
Answer:	I do not believe it would. These are definitely specific to each Chromebook. (Won't fit my older version of the same Acer Chromebook for example.) I really like this skin though so maybe contact the maker YYubao and see if they make one that fits your Chromebook.
Question:	Does this inflator have a 1/4" mnpt fitting on the air chuck end of the hose
Answer:	I dont know much about laptops, but match the pic with your laptop and it should fit perfectly
Question:	Can the inflator be used to check tire pressure without a pneumatic hose connected
Answer:	I bought the black one for Acer Aspire 7741z 17.6" and it is the same size as my keyboard. I can't get the skin to stay on the keyboard for very long though, however, it may be user error. I imagine it would be easy to find out if our models have the same keyboard.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• 21" Stainless Steel Hose with Fittings and Locking Chuck
• Improved hose quality
• Easy to change hose including fittings
• Easy to change chuck system
• Long lasting quality parts

User questions & answers

Question:	Can this take the place of a dual-head chuck for dual rear tires? By bending the hose sharply or adding a U-shaped valve extension
Answer:	I do not think this hose will work the way you need it to on dual wheels. The hose will not bend enough without kinking. I don't think there is enough room to get your hands in such a tight area.
Question:	I have the matco dt4a which is the digital inflator that's similar to the astro, anyone buy this cable to fix their matco hose
Answer:	I bought it to repair my Matco inflator , works great.
Question:	Will this fit the astroai tire inflator? it would be great to have a quick chuck instead of a screw on fitting
Answer:	do not know, we use on an air hose
Question:	Will this fit the old astro model with rubber hose
Answer:	I would lean towards yes. I used it on an non Astro tool and the fitting size appears to be pretty industry standards for this type of tool. Not 100% though

Product description

Patented structure increases power and reduces shockShorter handle with double compound hinges that maximize leverageIncludes Hand Nut/Thread Setting Riveter6 interchangeable mandrel/nosepiece sets in Metric M5, M6, & M8 and in SAE 10-24, 1/4-20, & 5/16-18Includes 10 pieces of each of the following rivet nuts: M5, M6, M8,10-24, 1/4-20 and 5/16-18Versatile and powerful hand nut/thread setting riveter, takes the hard work out of setting rivet nutsIdeal for working in hard-to-reach areaErgonomic grip for easy operationAstro Pneumatic 1442 13" Nut/Thread Setting Hand Riveter Kit with 3-Pc Metric and 3-Pc SAE Mandrel/Nosepiece Sets and Rivet Nut Assortment

• New "Toolless Quick-Change Head" design allows for easy changing of mandrels and nose pieces by hand
• Disassembly of tool never required, unique spring loaded inner hex sleeve automatically locks the rotation of hand installed mandrel
• Shorter handle with double compound hinges maximizing leverage. Great for off-road / Jeep modifications
• 6 interchangeable mandrel/nosepiece sets and 10pc rivet nuts in Metric M5, M6, & M8 and in SAE 10-24, 1/4-20, & 5/16-18
• Includes 10 pieces of each of the following rivet nuts: M5, M6, M8,10-24, 1/4-20 and 5/16-18

User questions & answers

Question:	Is this tool made in the USA
Answer:	My Information states the AST1442 is made in China.
Question:	Can you buy and use larger mandrels for this tool
Answer:	I found M10 and other Mandrels for the 1442 tool here on Amazon. Type this search phrase in "Astro Pneumatic Tool 1442". You will see mandrels that fit the 1442 tool
Question:	Does this come with the M8 size ? i see other reviews mention its missing
Answer:	Sorry, re: my previous response... but there is a plastic container for the M8, but it is empty. ( missing)
Question:	sizes of mandrels included
Answer:	the size of mandrels inside the package is limited, no M10, and the tool is 13'', cannot handle many works, try a 14'' auto pumping rod tool

Product features

Rivet Nuts: Dependable and Versatile

Whether it's body panels, firewall additions, off-road modification or bicycle attachments, rivet nuts provide a customizable fastener solution where previous options fell short.

Quick-Change Mandrel System

Interchange mandrels and nosepieces by hand without the need for additional tools.

Torque Multiplying Hinges

Maximizes leverage and multiplies pulling force.

Fully Set Knurled Rivet Nut

When set, provides a permanent threaded solution for flexible fastening and unfastening.

Expanded Sizes Available Separately

-Heavy Duty 1/2" Capacity Rivet Nut Setting Kit.

-Item Number: 1452.

Expanded Sizes Available Separately

-3/8-16 Mandrel & Nosepiece Set.

-Item Number: 1442-3/8-16A.

Expanded Sizes Available Separately

-10-32 Mandrel & Nosepiece Set.

-Item Number: 1442-10-32A.

Expanded Sizes Available Separately

-8-32 Mandrel & Nosepiece Set

-Item Number: 1442-8-32A.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• For setting bulbed PlusNut's, longer than standard rivet nuts and even standard rivet nuts
• Includes 9 SAE and Metric sizes: 10-32, 10-24, 1/4-20, 5/16-18, 3/8-16, M5, M6, M8 & M10
• Features the market's most popular rivet nut setting tool (1442) adapted for PlusNut and long rivet nut use
• Quick-change 13" rivet nut setter and storage case

User questions & answers

Question:	Are the extra long dies available as a separate kit
Answer:	Hello, There are 10 white noise sounds and 10 fan sounds. The fan sounds are a range from exhaust fan/ceiling fan/box fan/etc while the white noise has one that is kinda waves while the rest are different pitches. There is great depth in sound from low pitch to high on fan & white noise. You can crank the volume up pretty high and I had the buttons memorized in 1 night so I could change it in the dark. The sounds are all pretty real, but if you're looking for something that has a lot of waves/waterfall/river sounds, this doesn't really have that, but I don't like those so I feel I have for once in my adult life found the perfect rig! I never checked to see if there was a used one for sale, but as there are no moving parts like fan models, I would think used would be a great way to save some dough. Good luck! Hope this helps.-Rod
Question:	does it work on regular rivet nuts or just on plus nuts
Answer:	Hello! I have two in my room, one on each nightstand, not because the volume of the conditioner is low, but because my fiance and I like to have our own! I can’t speak to your exact situation, but I can tell you I don’t hear my neighbors (townhouse), or anything outside (barking dogs, cars, people, birds, garbage trucks, motorcycles). This sound conditioner has improved my sleep to the point that I don’t want to get up in the morning! It’s amazingly hypnotizing! It can be turned up pretty loud as well, that was my issue with other sound conditioners, not loud enough. I’d try one if I were you. You can always return it if it doesn’t help your situation, but I think you’d love it. It has seriously helped my sleep. Good luck!
Question:	Are replacement parts fir the gun itself avaulable
Answer:	Label on the compressor says 40 A
Question:	According to the listing and astro website the 1450 is a modified 1442. does the 1450 also feature "tool-less quick-change" as does the
Answer:	I can't say for certain. but it fits my Acer CB5-132T series which is 11 1/2" wide. Make sure all the keys are the same.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• The most robust and powerful pistol style hand rivet nut setter yet
• At only 7.5" long, fits where most 1/4" capacity tools do not
• Includes rivet nut assortment and sizes M4, M5, M6, 8-32, 10-24 and 1/4-20
• Weight: 1.54 lbs. (700g)

User questions & answers

Question:	Does this item come with storage case
Answer:	I bought one in March 2019 but have only used it a couple of times (maybe 2 nights every 2 or 3 months), and it won't charge anymore. The USB thing seems broken.
Question:	How many rivet nuts come in the assortment with the 1443B tool
Answer:	YES! That is exactly how I use it. I turn it on when I go to bed at night and turn it off when I get up in the morning. Mine runs all night long. This is such a great little machine!
Question:	How is this pneumatic
Answer:	Yes. You should set up the SoundStory and volume the way you like and then turn off the LectroFan with the Power button on the upper-right corner of the front panel. This will save the current settings. The next time power is restored (or when you press the Power button), the previously played SoundStory and volume will be played. So, the next time a switched outlet is activated, the LectroFan will come on. This feature of coming on when power is applied can be turned off or on, as described in the user manual. By default, out of the box, this feature is on.