11 best inverter with chargers

Product description

The AIMS 1250 watt low frequency inverter charger is perfect for most off grid systems, semi-trucks, 5th wheels, toy haulers or any remote locations needing power. Providing 1250 watts of continuous, clean and reliable pure sine wave power, ideal for sensitive electronics and household appliances. AIMS developed this inverter with less bells and whistles, making if more affordable and easy to use for applications that don't need a lot of extra features. We consider this our better of our good, better, best product lines. If needed, this inverter has the capability of producing 3750 watts of total surge power for 20 seconds, for start up applications like refrigerators, computers, fans and microwaves (if running more than 3000 watt often, we strongly recommend purchasing a larger inverter). This inverter boasts a 35 amp charger and automatic transfer switch. For use with shore power or generator power to recharge your batteries or as a back-up for your sump pump, medical equipment, appliances, tools and most anything up to 10 AC amps.

• 3750 watt surge for 20 seconds 300% surge capability
• Marine coated and protected
• Multi stage smart charger 35A AC input cable included
• LCD or LED remote panel available
• Thermal and load based fan - GFCI outlet

User questions & answers

Question:	Can it be hardwired to a house main panel? Its the ground line live
Answer:	12 volt. Deep cycle such as golf cart batteries, the more amp hours you buy the longer it will run without recharging. I am using 2 Rolls Surrett S 550 they are 430 amp hours and work great for my application
Question:	does it automatically switch to battery power in the event of a power outage
Answer:	I use a surge protection all the time for ease of mind. I'm tempted to permanently install it. I also run shore power in to a designated breaker box. Into the victron, out to the original breaker box and back into the rv. In my rv I choose to take the shore power cable and manually plug it into a designated outlet for the genset, instead of using a switch. All AC and DC lines are fused or breakerd according to wire guages. And each system solar, shore power and generator have disconnect switches. I chose victron and battle born for the batteries mostly for durability and quality. 3 years later could not be more greatfull. 2001 winnebago rialta rv
Question:	What are the DC Power cable lug sizes
Answer:	No!
Question:	What kind of battery is required
Answer:	The breaker size depends on the load your boat requires. Our system is a 30amp system, using a Victron Multi plus 12/3000/120-50. Also make sure to program the Multiplus for a max AC input of 30 amps

Product description

This AIMS Power 2000 Watt ETL Listed Pure Sine Wave Inverter Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system. It is packed with unique features and it is one of the most advanced inverter chargers in the market today. The sophisticated multi-stage 70 amp battery charger has an 8 type battery selector for ensuring efficient charging for a variety of battery types from AGM, Flooded Lead Acid, Gel as well as others. The charging current is adjustable to 0-100 percent for enhanced control on lower capacity battery banks. The built in transfer switch allows for seamless power when generator or utility power is present with a typical transfer time of approximately 10ms. The AC/Battery priority switch and auto generator start functionality make it suitable to work in either backup power or renewable energy applications as well. This unit is also equipped with an optional power saver mode designed to save battery power when AC loads are rarely or infrequently operated. When the power saver function is activated the inverter will go into a search mode. If a load greater than 50W is detected in this search mode the inverter will fully power on to supply the load. If no load is detected the inverter goes back into search mode, greatly decreasing the power used for operating the inverter. This inverter charger is ETL listed to conform to UL 458 for land vehicles and marine crafts. The AIMS Power Pure Sine Wave Inverter Charger is suitable for a myriad of applications including renewable energy systems, utility, truck, RV and emergency vehicles and more.

• POWERFUL: 2000W continuous, 6000W surge for 20 seconds, 16 amps pure sine clean power, low frequency, auto transfer switch and 70A smart battery charger for 8 different battery technologies including lithium.
• PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
• FEATURES: GFCI outlet, AC direct connect terminal block, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode. Only one set of cables needed. Optional remote available. Listed to UL & CSA.
• APPLICATIONS: Ideal for applications going back and forth from shore/generator and inverter power automatically. Homes, boats, RVs, solar, mobile business & work trucks. Offgrid & back-up power.
• TRUST AIMS: Buy with confidence. In business for over 20 year. All tech and warranty support in Nevada. 2 Yr warranty.

User questions & answers

Question:	Will this unit pass thru a 50 amp shore power supply
Answer:	Yes
Question:	Will this inverter Work w litium batteries
Answer:	You push it on to the tire valve and the pressure is immediately registered. It is not an air compressor fitting. It does not "click" or "lock" onto the valve. It works just like other pencil type pressure gauges.
Question:	Can the installed remote on/off ona rv be used to handle this function
Answer:	It has a flexible hose that would work.
Question:	How loud is the fans
Answer:	No, it is made in China. Unfortunately, there is no Made in USA gauge available on the market for $20 (or even $30). This gauge is good quality for the price, and has a lifetime warranty. If you have a problem, you can always contact us or the manufacturer, G.H. Meiser, even after Amazon's 30-day window. Thanks!

Product features

AIMS Power 2000 Watt 12V Pure Sine Inverter Charger w/6000W Surge ETL Certified

This 600 watt pure sine inverter charger, ETL Listed to conform with UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%. It is packed with unique features. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

Pure Sine Power for all of your devices

Pure Sine Inverters have a cleaner signal compared to Modified Sine that have a 'blocky' signal. Pure sine wave is like the power you get from your local power company and from some pure sine generators (most generators are not pure sine).

A major advantage of a pure sine wave inverter is that all of the equipment which is sold on the market is designed for a pure sine wave. This guarantees that the equipment will work to its full specifications.

Some appliances, such as LED lights and microwave ovens will only produce full output with pure sine wave power.

Audio equipment, satellite systems, and video equipment, will run properly using pure sine wave inverters.

Pure Sine Wave Inverters outperform all other types of inverters, regardless of use.

Optional Features

Remote on/off switch with LCD for AIMS pure sine inverter chargers - The remote monitors battery voltage, AC input voltage, AC output voltage, frequency and load percentage. The remote can be flush mounted into a dash, job box or anywhere for quick access to key information. (Part # Remotelf)

Battery temperature sensor - This allows careful monitoring of the batteries for extended life and longevity. The sensor plugs into the inverter and the other end is attached to the battery(s) and provides battery temperature information (Part # PICGLFBATS)

Auto generator start - The inverter can be customized to start-up a generator when the battery voltage goes low.

When the inverter goes to low battery alarm, it can send a signal to start a generator. The auto gen start feature will only work with generators designed to work with this feature.

Battery Charger

The AIMS Power 2000 Watt 12V Pure Sine Inverter Charger w/6000W Surge ETL Certified is equipped with a powerful 4-step smart charger capable of charging at 70 Amps.

The built in battery selector for this inverter works with Gel USA, AGM 1, AGM 2, Sealed Lead Acid, Gel EURO, and Open Lead Acid battery types.

The max charge current can be adjusted from 0%-100% via a liner switch to the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank. Choosing '0' in the battery type selector will disable the charging function.

Automatic Transfer Switch

This inverter comes installed with an automatic transfer switch which will quickly transfer you to back up power in case of a power outage without you having to flip a switch. (10 ms max transfer time)

When utility AC power cuts off (or falls out of acceptable range), the transfer relay is de-energized and the load is automatically transferred to Inverter mode. Once the qualified AC power is restored the relay is re-energized and the load is automatically reconnected to AC bypass mode.

Easy Set Up and Technical Support

Easy to set up and use. This inverter comes with an easy to follow manual. Additionally, all customers who buy from an authorized AIMS dealer can contact the AIMS technical support team directly for any questions during set up.

AIMS Power will only warranty and provide technical support for products purchased through an authorized AIMS Power Dealer. Not every Amazon seller is an authorized AIMS Dealer. Make good purchasing decisions.

Technical Specifications

Listed to UL 458 Standards

Continuous output power: 2000 Watt

Surge rating: 6000 Watt (20 seconds)

Output waveform: pure sine /same as input (bypass mode)

Output voltage: 100-110-120 VAC

Nominal efficiency: >92% (peak) / Line mode efficiency: >95%

Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz

Typical transfer time: 10ms (max)

Output terminal breaker – 20 A / GFCI breaker – 15 A

THD: < 10% DC

Input Specifications:

Nominal input voltage: 12.0 VDC

Minimum start voltage: 10.0 VDC

Low battery alarm: 10.5 VDC -11.0 VDC / Low battery trip: 10.0 VDC-10.5 VDC / Low battery voltage restart: 13.0 VDC

High voltage alarm: 16.0 VDC

Idle consumption: 28 watts

Input- 20 A

Power saver mode idle consumption: <12.7 watts

Charger Specifications:

Output voltage: depends on battery type

Charger rate: 70A

Product description

The 2000 watt 12 volt low frequency AIMS Power inverter charger transforms DC (direct current) power, stored by batteries, into AC (alternating current) electricity that can be used to run your various tools and appliances. This inverter also has a built in AC-to-DC battery converter charger, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home. The built in battery charger features a seven type battery selector and 3 stage charging, for safely and effectively charging your battery source. Use this product for renewable solar, off-grid, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.

• POWERFUL: 2000W continuous, 6000W surge for 20 seconds, 16 amps, 120VAC pure sine clean power, low frequency, auto transfer switch and 70A smart battery charger for 8 different battery technologies including lithium.
• PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
• FEATURES: GFCI Outlet, AC direct connect terminal block, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode and battery temp sensor. Only one set of cables needed. Optional remotes available.
• APPLICATIONS: Ideal for applications going back and forth from shore/generator and inverter power automatically, offgrid and back-up power. Homes, boats, RVs, solar, mobile business & work trucks. 12 Volt more efficient and can use smaller cables.
• TRUST AIMS: Buy with confidence. In business for over 20 years. All tech and warranty support in Nevada.

User questions & answers

Question:	Will it work with 220vac system
Answer:	you would have to split your 240 vac and only use one leg to get your 120 vac line
Question:	I turn on the inverter than set the gfi and the inverter vibrates for a few seconds and beeps with an over load indication. there is no load connected
Answer:	Mine acted almost the same way. Turns out it was wired wrong when it was installed in our motor home. I had someone correct the wring, but by that time the circuit board was bad. Replaced the circuit board and it has worked great.
Question:	Just to verify, the ac in connects to the shore power extensin cord. correct
Answer:	It can be wired to receive shore power, and will charge when connected IF the inverter is either on or in standby mode. It will not charge if the switch is set to OFF.
Question:	Is there a remote monitoring device that will work with this? Using wifi
Answer:	Its a wired remote, no wifi. Model# remotelf

Product features

AIMS Power 2000 Watt 12 VDC Pure Sine Inverter Charger w/6000W Surge

The AIMS 2000 watt low frequency inverter charger is perfect for most off grid systems, semi-trucks, 5th wheels, toy haulers or any remote location needing power. Providing 2000 watts of continuous, clean and reliable pure sine wave power, ideal for sensitive electronics and household appliances. If needed, this inverter has the capability of producing 6000 watts of total surge power for 20 seconds, for start up applications like refrigerators, computers, fans and microwaves (if running more than 6000 watt often, we strongly recommend purchasing a larger inverter).

This inverter boasts a 70 amp charger and automatic transfer switch. For use with shore power or generator power to recharge your batteries or as a back-up for your sump pump, medical equipment, lighting system or security and surveillance system.

The AIMS PICOGLF Inverter Chargers are Marine, Military and Industrial grade.

Pure Sine Power for all of your devices

Pure Sine Inverters have a cleaner signal compared to Modified Sine that have a 'blocky' signal. Pure sine wave is like the power you get from your local power company and from some pure sine generators (most generators are not pure sine).

A major advantage of a pure sine wave inverter is that all of the equipment which is sold on the market is designed for a pure sine wave. This guarantees that the equipment will work to its full specifications.

Some appliances, such as LED lights and microwave ovens will only produce full output with pure sine wave power.

Audio equipment, satellite systems, and video equipment, will run properly using pure sine wave inverters.

Pure Sine Wave Inverters outperform all other types of inverters, regardless of use.

Optional Features

* Remote on/off switch with lcd for aims pure sine inverter chargers - The remote monitors battery voltage, AC input voltage, AC output voltage, frequency and load percentage. The remote can be flush mounted into a dash, job box or anywhere for quick access to key information. (Part # Remotelf)

* Battery temperature sensor - This allows careful monitoring of the batteries for extended life and longevity. The sensor plugs into the inverter and the other end is attached to the battery(s) and provides battery temperature information (Part # PICGLFBATS)

* Auto generator start - The inverter can be customized to start-up a generator when the battery voltage goes low.

When the inverter goes to low battery alarm, it can send a signal to start a generator. The auto gen start feature will only work with generators designed to work with this feature.

Battery Charger

The AIMS Power 2000 Watt 12 VDC Pure Sine Inverter Charger w/6000W Surge is equipped with a powerful 4-step smart charger capable of charging at 70 Amps.

The built in battery selector for this inverter works with Gel USA, AGM 1, AGM 2, Sealed Lead Acid, Gel EURO, and Open Lead Acid battery types.

The max charge current can be adjusted from 0%-100% via a liner switch to the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank. Choosing '0' in the battery type selector will disable the charging function.

Automatic Transfer Switch

This inverter comes installed with an automatic transfer switch which will quickly transfer you to back up power in case of a power outage without you having to flip a switch. (10 ms max transfer time)

When utility AC power cuts off (or falls out of acceptable range), the transfer relay is de-energized and the load is automatically transferred to Inverter mode. Once the qualified AC power is restored the relay is re-energized and the load is automatically reconnected to AC bypass mode.

Easy Set Up and Technical Support

Easy to set up and use. This inverter comes with an easy to follow manual. Additionally, all customers who buy from an authorized AIMS dealer can contact the AIMS technical support team directly for any questions during set up.

AIMS Power will only warranty and provide technical support for products purchased through an authorized AIMS Power Dealer. Not every Amazon seller is an authorized AIMS Dealer. Make good purchasing decisions.

Product description

The Renogy 1000W pure sine wave inverter charger is the perfect addition to any RV or trailer solar power system. Not only will it convert DC power to AC, but it will also keep the battery bank charged with solar during the day & can switch to generator or shore power at night. As a pure sine wave inverter, it is capable of producing cleaner, smoother, quieter, & more reliable electricity to operate tools, fans, lights, & other electronics, without any interference. Never feel hindered On your journey, let the 1000W pure sine wave inverter charger keep you charged!

• Surge ratings of 2000W, maximum bypass Current of 20A
• Dc and AC inputs
• 4 stage Battery charger, 8 pre-set Battery voltages
• Automatic generator start option; power saving mode
• Compatible with gel, AGM, sealed lead acid, flooded lead Acid, and calcium batteries"
• Input Voltage Range:99-130VAC

User questions & answers

Question:	There's a little bit of a high pitched noise when the inverter is running. Is that normal
Answer:	Yes it does but make sure you understand that it does not pass all available amperage thru the unit. the 2000W unit only passes 20A so take that into account if you want to run an AC unit and other items as you will possibly blow the breaker on the inverter/charger......ask me how I know :). What I ended up doing was installing a switch box and wired the shore power to the switch box and then on 2 separate legs I fed the inverter and the the power distribution panel on the trailer. Issue solved.
Question:	How do i attach the temperature sensor to the batteries
Answer:	This unit does not have an AC terminal block and can not be hardwired.
Question:	What is the function power saver do when sellected on the remote
Answer:	This unit has an automatic transfer switch so it will switch to battery power if the AC power shuts off.
Question:	Does this inverter have AC outputs that can be wired directly into a sub panel/breaker box instead of using the outlets
Answer:	We recommend using lugs with 3/8” diameter with this inverter

Product features

Available in 1000W, 2000W and 3000W

Capable of producing clean, smooth, quiet, and more reliable electricity to keep your electronics charged without interference!

Product description

AIMS Power PICOGLF60W48V120V Pure Sine Inverter Charger, 6000W Inverter 110 Vac Single Phase, 18000W Surge for 20 Seconds -3x Surge Capability, Battery Priority Selector, Terminal Block

The most common use for this inverter is emergency backup power. Youll always be prepared for the next power outage with access to 6000 watts of continuous power and 18,000 watts of surge (for up to 20 seconds). This inverter will output 120 Vac, and it can output 50 or 60Hz via the SW4 switch on the DC side of the product. This means the inverter works internationally and is operable with nearly any electrical system on the planet

Key Features

• 6000 watt low frequency inverter 110 Vac Single Phase
• 18000 watt surge for 20 seconds -3x surge capability
• Battery Priority Selector
• Terminal Block
• Marine Coated and Protected
• Multi Stage Smart charger 80 Amp
• Remote panel available
• 60hz or 50 hz selectable dip switch
• 10msec typical transfer time
• Optional 25W power save mode
• 100-110-120Vac
• 7 battery type settings for charger

Specifications

• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: < 10% DC
• Nominal Input Voltage: 48.0Vdc
• Low Battery Alarm: 42.0Vdc-44.0Vdc
• Low battery Trip: 40.0Vdc-42.0Vdc
• High Voltage Alarm: 64.0Vdc
• Low battery Voltage Restart: 62.0Vdc
• Idle Consumption: 4.16 amps DC
• Power Saver Mode Idle Consumption: <0.83 amps DC
• Dimensions: 23.5" x 8.5" x 7.0"
• Weight: 79 lbs

• POWERFUL: 6000W continuous, 18000W surge for 20 seconds, 48VDC, 50 amps, 120VAC pure sine clean power, low frequency, auto transfer switch and 60A smart battery charger for 8 different battery technologies including lithium.
• PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
• FEATURES: AC direct connect terminal block, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode and battery temp sensor. Only one set of cables needed. Optional remote available.
• APPLICATIONS: Ideal for large applications going back and forth from shore/generator and inverter power automatically. Homes, boats, RVs, solar, mobile business & work trucks. 24 Volt more efficient and can use smaller cables. Offgrid & back-up power.
• TRUST AIMS: Buy with confidence. In business for over 20 year. All tech and warranty support in Nevada.

User questions & answers

Question:	Is this inverter 1741 UL listed
Answer:	Yes, you can use it to check the tire pressure.
Question:	What are the low and high temperature operating limits
Answer:	Si
Question:	Can I use a big fridge with this inverter
Answer:	I’m not sure but I at this price can only assume it’s from an oppressive one.
Question:	What is the maximum battery input voltage this will tolerate? (my 48v agm battery array can get up to nearly 60 volts during charge
Answer:	This is a gauge. It does not inflate at all. The stated accuracy is +/- 1 PSI. If you need to know your PSI to the nearest tenth, you need to spend a lot more money and get a gauge with the accuracy that you need. Seldom is that high an accuracy necessary in an air pressure gauge. This gauge works very well for a vehicle glove box item.

• 1.This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.GFCI socket ,low frequency,low Idle Current,BTS cable, remote control
• 2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function
• 3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.
• 4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.
• 5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)/Back feeding protection

User questions & answers

Question:	Can I also attached my solar panels thru this item to charge my batteries
Answer:	Yes, the ¼"" NPT air steel fitting can be connected to an air compressor for vehicles, including truck, car, SUV, motorcycle, and bicycle. Hope this helps!
Question:	Is this inverter large enough to handle the starting load of a 3/4hp sump pump
Answer:	I have used mine yet, just received it. The one sheet manual didn’t have any instruction of deflating the tire but it indicates something called “Air Bleed Valve”. Based on that, I would say “yes”.
Question:	Can this be hardwired to an ac breaker panel? i don't see any output terminals other than the outlet. if so, what size wire can the terminal accept
Answer:	If you are talking about the external air filling stations, then NO. This is meant to be able to connect to an air hose, directly off an air compressor, using a quick connect fitting (That is included)
Question:	Is the quality of this as good as the more expensive aims version
Answer:	No, please do not use this product to inflate balls. It is only for tires. Hope this helps!

Product features

3000W Peak 9000W Pure Sine Wave Power Inverter DC 24V AC 120V With Battery AC Charger LCD Display

• * Low Frequency Pure Sine Inverter With Charger
• * AC/Battery Priority Selector
• * Automatically Generator Start
• * GFCI Socket, Safety and Convenient
• * The low freqency inverter can power all kinds of appliances
• * LCD Display, Remote Control, BTS including
• * Low Idle Consumption
• * Battery type settings for charger
• * Multi Stage Smart charger Max 40A, charger can be disable
• * 10msec typical transfer time

Inverter Output:

• Continuous Output Power: 3000 Watts
• Surge Rating: 9000 Watts (20 Seconds)
• Output: 120VAC, 60hz
• Output Wave: Pure Sine Wave (bypass mode)
• Typical Transfer Time: 10ms（MAX）
• Nominal Efficiency: >88%

DC Input:

• Nominal Input Voltage: 24.0Vdc
• Minimum Start Voltage: 20.0Vdc
• Low Battery Alarm: 21.0Vdc-22.0Vdc
• Low battery Trip: 20.0Vdc-21.0Vdc (select by SW1）
• High Voltage Alarm: 32.0Vdc
• Low battery Voltage Restart: 26Vdc
• Idle Consumption: 39 Watts
• Power Saver Mode Idle Consumption: 16 Watts

LED Indicator

Battery type Suitable: lithium LiFePO4, gel, AGM and lead Acid batteries. We recommend checking battery charging specifications for all batteries.

Charging Current Control: The max charge current can be adjusted from 0%-100%

LED Indicator:

• Over load trip
• Over temperature trip
• Charger on float/fast charger mode
• Inverter power on line,battery charger off
• Shore power on line battery charger active

Multi Functions

Auto Generator Start: The inverter can start up a generator when battery voltage goes low.Generator power should be 1.5 times higher than the inverter power.

Battery Temperature Sensor：BTS cable can monitor the batteries for extended life and longevity.

AC/Battery Priority: The AC Priority and Battery Priority switch is selected by SW5.

Remote Control: Comes with 33 foot connection cable, control the power on/off.

AC Wiring Method:

120V single phase

Input: Hot line+Neutral+Ground

Output: Hot line+Neutral+Ground

WARNING:

1.The output voltage of this unit must never be connected in its input AC terminal, overload or damage may result.

2.Always switch on the inverter before plugging in any appliance.

• 2000 Watt continuous pure sine power inverter Peak 6000W 12V DC to 110V/120V AC Off Grid solar inverter,Remote panel available
• Battery AC Charger LCD Display Low Frequency Solar inverter 35A max Support lifep04，Sealed Gel AGM Flooded Lithium, Sealed, Gel, and Flooded Batteries
• High-definition LCD display,full-vision real-time monitoring data,5-10msec typical transfer time
• Selectable 8W power save mode,Five modes of operation,working Mode(optional): 1.AC Input Priority; 2.Battery Prioritye; 3.ECO Mode; 4.Generator Mode; 5.Unattended Mode;
• charging current and charging voltage can be adjusted;customizable voltage for low voltage protection and voltage for low voltage recovery.

User questions & answers

Question:	Can this automatically start a honda eu7000is generator? if so what do i need to make it work
Answer:	You can connect the generator that 110V/120V to the "AC output port" .
Question:	What is the warranty for this unit
Answer:	Our products are guaranteed for two years!
Question:	Is this product ship from china
Answer:	Ship from US.
Question:	if used with an off-grid system with generator when you turn on the generator will this inverter switch over to generator power
Answer:	if you use 110V generator mode ，it will

Product features

Product specification

110%-120% of output could be maintained for 30 seconds,then the output turn to bypass,and more than 160% maintain the 300ms.Intelligent speed control air cooling

Mains Charging Voltage is adjustable

DC 12V Inverter :13.6-14.9VDC

DC 24V Inverter :27.2-29.8VDC

DC 48V Inverter :54.4-59.6VDC

Parameter

AC input volatage range:85V-135V;

AC input frequency:60Hz(55-65Hz);

Ouput: Conversion efficiency ≥88%;

Ouput voltage:110VAC ±3%(battery mode); Output frequency:±0.5Hz(battery mode) ;

Output wave form:pure sine wave.

Toroidal transformer

High effecience,no load current 0.5A,Fast switching speed

Power tube

High-efficiency Power tube.Strong resistance to current and voltage impact

motherboad

The US imports DSP control chips,multiple high Q,high-flux inductances,new imported compenents,high-density motherboad desigh,MPPT tracking rate and higher power generation rate,up to 98%.

Product description

Xantrex 815-3024 Freedom SW 3024 24V Inverter/Charger, 3000W Output continuous power, 6000W Surge rating, Parallel stacking capability to double the inverter power output, Wide operating temperature range

The Freedom SW inverter/charger provides utility grade AC power to operate commonly used AC-powered electronics such as plasma television sets, microwaves, entertainment systems, computers, printers, power tools, refrigerators and much more.

Key Features

• Advanced configuration options for customized applications
• Temperature compensated charging for a vareity of climate conditions
• Wide operating temperature range
• Conformal coated circuit boards for humid environments
• Fits with the Xantrex Automatic Generator Start (809-0915) (Sold separately)

Specifications

• Inverter
• Peak output current: 80A
• Output frequency: 60 Hz +/- 0.2 Hz
• Output voltage: 120 Vac
• Optimal efficiency: 94%
• No-load power draw (inverting): <1.5 Adc
• Input DC voltage range: 20 - 32 Vdc
• Charger
• Output current: 75A
• Output voltage: 24 Vdc
• Output voltage range: 12 - 32 Vdc
• Charge control: 3 stage with manual equalize
• Charge temperature compensation: Remote battery sensor (included)
• Efficiency: > 85%
• AC input power factor: 0.95 typical
• Input current: 22A rms nominal
• Input AC voltage: 120 Vac
• Input AC voltage range: 85 - 140 Vac
• Dead battery charge: > 12 Vdc
• General
• Compatible battery types: Flooded/Gel/AGM
• Transfer relay rating: 2 leg of 30A each
• Transfer time: < 20ms
• Operating temperature range: - 4°F to 104°F
• Storage ambient temperature range: -40°F to 185°F
• Dimensions (HxWxL): 7.75" x 13.5" x 15.25"
• Weight: 69.4 lbs

• Built-in transfer switch automatically transfers between inverter power and incoming AC power
• Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power
• Dual input/Dual output AC interface, Series stacking capability enables operation of 240 Vac applications
• Power factor corrected, multi-stage charger for fast, efficient charging
• Battery over-voltage and under-voltage protection, Over-temperature shutdown, Automatic overload protection, Short-circuit protection

User questions & answers

Question:	Is this a 240 V or 120V and is it UK compatible
Answer:	China (of course!)
Question:	with the S3024 do I still need the Parallax power supply transfer box
Answer:	It comes with an adapter so yes it should work.
Question:	Can. This work with lithium batteries
Answer:	3 year warranty provided by TiGaAT

• 1.This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.Low frequency,low Idle Current,remote control
• 2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function
• 3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.
• 4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature
• 5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)/Back feeding protection

User questions & answers

Question:	Hello i'm in australia. i require 240v at 50hz. do you offer a 6000watt inverter
Answer:	Since I have this hooked up from my tv to my stereo it is only on when the tv is on.
Question:	what is the idle wattage
Answer:	Toslink/spdif optical digital cable and/or coaxial audio cable (similar to cable tv cable but with RCA connectors). The yellow input is NOT a video input.
Question:	Are the high and low battery alarms audible? If so, how loud is the alarm and can the sound be disconnected so no noise is made
Answer:	I am not sure about that.But you can switch them through the remote control,it is in the package.
Question:	Can this work with Enphase micro inverters on the same grid
Answer:	Yes it can be used also as a tire pressure gauge. Just connect it to the tire valve.

Product features

4000W Max 12000W DC 12V Input 240VAC Split Phase 120V 240V Output Low Frequency LFP Series Pure Sine Inverter With Charger

• * Low Frequency Pure Sine Inverter With Charger
• * AC/Battery Priority Selector
• * Automatically Generator Start
• * Safety and Convenient
• * The low freqency inverter can power all kinds of appliances
• * LCD Display, Remote Control
• * Low Idle Consumption
• * Battery type settings for charger
• * Multi Stage Smart charger 120+/-5A, charger can be disable
• * 10msec typical transfer time

Inverter Output:

• Continuous Output Power: 4000 Watts
• Surge Rating: 12000 Watts (20 Seconds)
• Output: AC120V and AC 240V , 60hz
• AC Input:240V
• Output Wave: Pure Sine Wave (bypass mode)
• Typical Transfer Time: 10ms（MAX)
• Nominal Efficiency: >88%

DC Input:

• Nominal Input Voltage: 12.0Vdc
• Minimum Start Voltage: 10.0Vdc
• Low Battery Alarm: 10.5Vdc-11.0Vdc
• Low battery Trip: 10.0Vdc-10.5Vdc (select by SW1)
• High Voltage Alarm: 16.0Vdc
• Low battery Voltage Restart: 13Vdc
• Idle Consumption: 45W
• Power Saver Mode Idle Consumption: 18W

LED Indicator

Battery type Suitable: lithium LiFePO4, gel, AGM and lead Acid batteries. We recommend checking battery charging specifications for all batteries.

Charging Current Control: The max charge current can be adjusted from 0%-100%

LED Indicator:

• Over load trip
• Over temperature trip
• Charger on float/fast charger mode
• Inverter power on line,battery charger off
• Shore power on line battery charger active

Multi Functions

Auto Generator Start: The inverter can start up a generator when battery voltage goes low.Generator power should be 1.5 times higher than the inverter power.

AC/Battery Priority: The AC Priority and Battery Priority switch is selected by SW4.

Battery Temperature Sensor: BTS cable can monitor the batteries for extended life and longevity.

Remote Control: Comes with 33 foot connection cable, control the power on/off.

AC Wiring Method:

240V split phase:

Input: Hot line+Hot line+Ground

Output 1: Hot line+Hot line+Neutral

Output 2: Hot line+Neutral

WARNING:

1.The output voltage of this unit must never be connected in its input AC terminal, overload or damage may result.

2.Always switch on the inverter before plugging in any appliance.

Product description

Pure Sine Wave Inverter, Adaptive Battery Charger, Transfer Relay - All in ONE unit. Using state of the art technology, the Samlex EVO inverter/charger operates at 165 million instructions per second with lightening fast load & response times, has 9 points of physical protection monitoring (being scanned up to 10,000 times per second) to detect fault conditions & prevent product damage and uses 5 different temperature sensors to activate 2 speed controlled cooling fans. It doesn't get much smarter than this. Samlex inverter/chargers are robust, reliable and affordable for everyone. Experience the Evolution.

• Two separate AC inputs for grid & generator
• Adaptive battery charger
• Synchronized transfer at zero crossing
• High surge inverter with active power boost
• Input for solar charge controller

User questions & answers

Question:	Does it have inbuilt dc and ac circuit breaker
Answer:	I could not get it to turn my Zenith tube type TV on and off
Question:	Do you need a charge controller for solar panels hooked to external battery charger
Answer:	NO,
Question:	Could i use this to backup a 120vac 1-ph sump pump? it pulls 10a @120vac (in-rush & max head pressure). how quick is transfer
Answer:	This zenith remote did not work for my zenith TV.
Question:	Where is the model EVO3012 made
Answer:	Yes, I believe it would. Perhaps just the right cable would be all that you need? I am not certain. Ask at a store that sells electronics.

Product description

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

• The Victron Energy Multiplus is a powerful compact 12-Volt 3000VA 120 amp 120V true sine wave inverter and a sophisticated battery charger with adaptive charge technology
• With the unique Power Assist feature the MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection
• In the event of a grid failure, or when shore or generator power is disconnected, the inverter is activated fast, within 20ms, and takes over the supply to the connected loads
• Up to 6 MultiPlus units can operate in parallel to achieve virtually unlimited power, Three phase or split phase operations are also possible
• Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation

User questions & answers

Question:	For RV’s do you need a surge protector upstream to prevent damage
Answer:	By default, it will prioritize the shore power over solar. You can install an assistant (Hub 1, I think) that will change that to prioritize solar and only use shore power when your battery drops below a certain level.
Question:	Does this charge your car battery when driving
Answer:
Question:	shore power breaker sizing - 30amp@120v breaker will work correct
Answer:	Yes, but 0 gauge can only safely handle about 170 amps, which is about about 2000 watts. You can use 2, 0 gauge wires per terminal to get the full 3000 watts safely. If you're using any thicker wire, I would recommend getting larger diameter terminals as 5/16 inch holes will not interface properly with the renogy positive and negative terminals.
Question:	I want to use the solar panels on my rv and only use shore power when my solar panels can't keep up with electric demands. Will this work for me
Answer:	use size depends upon the inverter size and the loads you are putting on it. Typically you size the wires and fuse for the inverter continuous load. This inverter is rated to be about 90% efficient. That means 12 volts x 0.90 = 10.8 volts (90% efficiency). 3000 watt inverter divided by 10.8 volts = 277 amps. The wire size going from the inverter to the battery is based upon heat resistance, so accounting for a possible 277 amps going through that wire you'll need a 4/0 wire (Pos & Neg). you will also need a fuse 25% larger than the rated amps so 277 x 1.25 = 346 amps. you'll need a 350 amp fuse on the positive cable going to the inverter. You can also increase the fuse size by an additional 15-20%, if you like, to account for surge watts. That would mean 346 x 1.15 = 398 so a 400 amp fuse would suffice. see less