12 best y j motorcycle jacks

• ✅SECURE ELEVATION: A must-have for sport or dirt bike enthusiasts. The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.
• ✅SAFETY FOOT STEP LEVER: The large foot step lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease.
• ✅SOLID CONSTRUCTION: The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.
• ✅PORTABLE CONVENIENCE: The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.
• ✅NON-SLIP DESIGN: Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage. Safely holds up to 300 pounds.

User questions & answers

Question:	If you changed out the hydraulic jack would the Aussie lift rise any higher
Answer:	The devices which we are currently selling are October 2017.
Question:	What is the highest distance for that lift
Answer:	Unfortunately only US units are allowed to be sold in the US. Thank you
Question:	Can i use this to put the bike in my pickup truck if the truck bed height is lower than 36 inches
Answer:	The price is usually around 1/3 of the full price, but it will depend on the conditions of your beacon once it's sent to the battery replacement center. If you are in an emergency you can just notify the manufacturer and they should replace it for free.
Question:	Anyone have thoughts about using this as a transmission jack
Answer:	Unfortunately no. Every unit sold in the US is built with a US code.

Product features

Durhand 36” Foot Step Hydraulic Pump Lift for Small Motorcycles and Dirt Bikes

Bike maintenance and repair is a daily ritual for most riders, and knowing that your lift can keep up with your consistent schedule is important. Durhand’s adjustable lift features a non-slip rubber top, hydraulic foot step lever, and a portable 4- wheel design that will keep you riding. This portable lift is a convenient size, and the 4 easy to maneuver wheels help you take it from the garage to the track, the shop, or the trail. A sturdy steel frame, powder coated for rust and corrosion resistance, gives this lift strength, durability, and longevity. With a large surface area, topped with non-skid rubber padding, your bike will sit fully elevated with no slipping. We know you love your bike, so let us help take some of the stress out of your maintenance routine when you use our adjustable lift from Durhand.

Secure Elevation

A must-have for sport or dirt bike enthusiasts! The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.

Safe and Sturdy

The large footstep lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease. Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage.

Solid Construction

The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.

Portable Convenience

The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.

Features

• Large top surface lifts your bike off of the ground for better access for maintenance and repair
• 4 wheels make this lift easily portable from the garage to the track, shop, or trail
• Constructed from durable steel
• Hold up to 300 lbs
• Large hydraulic foot step lever design promote safety
• Non-skid rubber padding on the top surface will keep your bike from slipping off

Specifications

• Material: Steel, Rubber
• Color: Blue
• Overall Size: 17.75" L x 15.75" W x 36.5" H
• Top Size: 16.5" L x 13.75" W
• Adjustable Height: 13.75" - 35.5"
• Net Weight: 60 lbs.
• Weight Capacity: 300 lbs.
• Accessories Included: 2 U-type hooks, foot step pedal lever, rubber foot pad, 2 hooks, long rod

Product description

87-06 Wrangler TJ YJ Bumper with winch plate.

Fit: 1987-2006 TJ YJ Wrangler all models.

Made from 5/32 inch steel sheet and powder coated in textured black.

TJ YJ front bumpers are a modern twist on a classic design.

Shackle mounts are welded onto the bumper from the inside and outside for maximum strength. Two 4.75 ton D-ring shackles included. Isolators will prevent distracting rattling noise while driving.

Welded hoop protects the front of the wrangler. Two tabs are designed for extra lights.

Laser-cutting, CNC folding, and robotic assembly welders.

Our front bumpers are engineered to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward installation.

The front bumpers are made to withstand anything that gets in their way while simultaneously providing your wrangler with the sharp-looking reinforcement you want!

TJ YJ rock crawler bumpers offer a heavy-duty design with maximum coverage, yet sleek enough to keep your wrangler safe even in the tightest conditions.

• Fit for 1987-2006 TJ YJ Wrangler all models.
• One piece welded design for ultimate strength. Manufactured from 5/32" cold rolled steel sheet and 2"x .120 steel tubing. Textured black powder coat for corrosion protection and durability.
• D-ring mounts are welded both inside and out for increased strength. D-rings are included-4.75 ton capacity each. Built-in winch plate for up to 12,000 lbs. winch.
• Welded hoop protects the front of the Wrangler TJ. Two tabs on pre-runner hoop for extra off-road lights.
• No cutting and no drilling required.

User questions & answers

Question:	Will this bolt to a 1994 nissian xe d21 3.0 4x
Answer:	If it’s the same measurements as a Jeep TJ it will.
Question:	Where are EAG parts manufactured
Answer:	Not here
Question:	Is the EAG logo removable
Answer:	Yes, remove the 6 bolts that hold it on.
Question:	Will this fit a 2005 Jeep Wrangler unlimited
Answer:	Mounted on my 1993 YJ and looks great. Top four bolts fit with no issues, however, bottom bolts are way off. I didn't bother with the bottom bolts and it fits solid.

Product features

EAG 1997-2006 Jeep Wrangler TJ Front Bumper

EAG's 1997-2006 Jeep Wrangler TJ Front Bumper with 2x D-ring & Winch Plate adds a bold and attractive style to any Jeep. With easy bolt on installation EAG’s bumpers are easier than ever to install. From the streets to the trails you can count on the winch plate that comes included to withstand any situation you might come across. This bumper offers Jeep owners contemporary trend-setting styling at an affordable price and is a major upgrade over assembly line looks.

Built-in Winch Plate

An integrated in bumper design prevents roller fairlead interference and maximizes utility. Standardized bolt pattern accommodates any brand of winch up to a 12,000 lb. capacity.

D-Rings, Isolators, Mounts

Shackle mounts are Robotic-welded onto the bumper from the inside and outside for maximum strength. Included D-rings are ¾” diameter, with a 7/8” diameter pin, and can support up to 9,500 lbs. D-ring isolators are included.

Contemporary Design

With a rugged look you can also expect the bumper to be finished with black textured powder coat paint for a long lasting finishing without breaking the bank. As one of the online sellers you can bet this flashy bumper will draw attention with its unique designs and durable finish.

No-Cut / No-Drill Installation

Our Jeep bumpers are designed to attach using OEM attachment points and double checked against multiple test-vehicles to ensure they not only line up but looks great. No modifications required to your Jeep are required.

About E-Autogrilles

EAG was founded by a combination of zealous and knowledgeable 'car guys' in 2010. Concentrating initially on supplying truck grilles, EAG has evolved into a highly sophisticated automotive company dedicated to providing fellow automotive fans the best products at the best prices. This 'best bang for your buck' attitude has enabled EAG to emerge as a major accessory provider in the truck and Jeep marketplace.

Product description

Product Dimensions:17.6 " x 10.6" x 4.5" Minimum Height: 3.25" Maximum Height: 13.25" Weight Capacity: 1100 lbs. Platform Dimensions: 16" x 10"

• Solid steel construction in a blue and black powder coated finish
• Simple crank operation
• Designed to fit most motorcycle models
• For use in the garage, shop, or at the track
• 10.6 Inch Wide Deck

User questions & answers

Question:	Does this roll
Answer:	I would suggest using this in the fx loop of your amp
Question:	Will this lift front end of a harley tri glide?Also will it block getting to oil drain hole
Answer:	Yes, you can have any combination of the effects running at the same time: 1, 2, or all 3.
Question:	How many threads per inch on the shaft
Answer:	No. You dial on the echo repeat rate with the little knob.
Question:	How many turns of the crank are required to raise the jack to full height
Answer:	Yes. You can use any guitar pedal with bass but the frequencie spectrum isn't meant for it.

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

• ✅【Appropriate size and material】-Our face cover is 10.2 inches wide and 11.8 inches long. Made of 100% polyester. The fabric is elastic and can be stretched to all sides. It fits all face shapes, so you can buy it with confidence
• ✅【Comfortable and Soft】-Made of high elastic, breathable fabric, the winter face cover is warm, soft and comfortable. Our face cover lets go through the material and still keep breaths your face warm
• ✅【Ultimate Protection From Cold, Wind, Dust & UV】-Our balaclava protects you against the elements whether you blaze down the slopes, shovel snow or motorcycle in the desert
• ✅【Versatility】- The Face cover fits most heads, it is a good winter gear for men and women. And it can be used for skiing, snowboarding, motorcycling, riding, biking, hunting, construction, warehouse work and shoveling snow
• ✅【Multiple Wearing Ways】- Simple but practical design offers you more space of imagination to choose your favorite wearing ways, you can use it as a helmet lining, headscarf, face cover, neck gaiter, balaclava, cap and so on

Product description

1987-1995 Jeep Wrangler YJ skid plate for the 15 and 20 gallon "plastic" tank. Replaces # 90710.

• Interior accessories
• The package length is 86.36 centimeters
• The package height is 29.21 centimeters
• The package width is 57.15 centimeters

User questions & answers

Question:	What is the bolt size for this, I cut all of them because of how rusted they were
Answer:	As Eric said, do you have a pic? I know Jeep had at least 8 different "versions" of the 20 gallon plastic tank made and I've heard of any early version having a bump on the bottom of the tank but I have never actually seen one. If you do have a bump on the bottom of the tank and the tank won't sit flat on the skid plate, you may have problems getting it to fit up in the Jeep. The tank must sit flat on the skid plate to fit into the tiny space Jeep allows for that tank. Here to help, Jamie T-Rex Auto Parts
Question:	How thick is this skid plate
Answer:	Be sure to consider your bikes center of gravity once the wheel is removed and be sure to ratchet strap the bike to either this jack or another fixed object
Question:	Does the tank have to be dropped for install
Answer:	Sure. I use it for 2010 FLHTC Electra Glide Classic. Works great and heavy duty. Worth the price for sure.i used it to lift my bike while tearing apart primary.
Question:	Just recieved my skid plate and notice that there is no center drop down area to accomodate the petrusion from the bottom of the tank...does it matter
Answer:	It would easily hold up the front of the Gold Wing in conjunction with the OEM center stand. I've used an ordinary scissors jack under one header pipe to gently lift the front wheel off the ground for cleaning. Alone, without the center stand? I wouldn't because there would be the entire weight of the bike on the engine case. The whole arrangement would have to be very precise to keep the machine from tipping.

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

1/4" (6. 4mm) hole size; panel range: .095"-. 540" - Nylon Shield Retainers --Quantity: 209/32" (7. 1mm) hole size; panel range: .125"-. 310" - Nylon Shield Retainers -- Quantity: 205/16" (7. 8mm) hole size; panel range: .078"-.490" -Black Shield Retainers --Quantity: 2023/64" (9mm) hole size; panel range: . 060"-. 510" - Black Shield Retainers --Quantity: 203/8" (9. 5mm) hole size; panel range: .115"-.565" -Black Shield Retainers --Quantity: 2025/64" (10mm) hole size; panel range: .040"-.787" -Black Shield Retainers --Quantity: 201/4" (6. 3mm) hole size; panel range: 9/16" - Black Mud Skirt Blind Rivets - Quantity: 205/16" (8mm) hole size; Head diameter: 20mm, Stem length: 11mm - Front fender push-type retainers - Quantity: 205/16" (8mm) hole size; head diameter: 20mm - stem length: 20mm -Air baffle to under carriage push-type retainers - Quantity: 2023/64" (9mm) hole size; head diameter: 18mm - stem length: 28mm - Rear bumper cover push-type retainers - Quantity: 2023/64" (10mm) hole size; head diameter: 20mm - stem length: 13mm - Push-type retainers - Quantity: 2023/64" (10mm) hole size; head diameter: 20mm - stem length: 18mm - Push-type retainers - Quantity: 20Package included: 1 x 240 Pcs Push Retainer Kit1 x fastener remover.

• UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
• SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
• HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
• MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
• EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.

User questions & answers

Question:	Will they work on nissan rogue 2014 front right bumper/ quarter panel
Answer:
Question:	Would these work on Nissan and kias
Answer:
Question:	Does it work on a sedan toyota yaris bumper
Answer:
Question:	Will these fit 2006 Subaru Impreza
Answer:

Product features

Specification:

5 Hole sizes from 6.7mm ,7mm, 8mm, 9mm.10mm.

12 different Push pin rivet for many brand vehicles.

Material: Made of durable nylon.

Suitable for car use better replacement for original bumper and fender clips.

Push in type, easy to fasten bumper fender flare and mud flap. Rivet post pressure expands legs for fast and tight fastening.

MOST POPULAR USE- Great door trim, radiator shield and splash shield retainers for Ford, GM & Chrysler

Product description

From the manufacturer GOOACC is a famous brand that dedicated to providing innovative, cost-effective and quality products. We have been specialized in automotive products and parts for many years. Constant improvement and innovation is our eternal aim. Hope you can purchase with satisfaction here. Specification: Universal fastener clips and remover 4 Whole sizes from 6.3 Mm (1/4"), 8mm (5/16”), 9mm (23/64”), 10mm (25/64”). 6 different Push pin rivet for many brand vehicles. Material: Made of durable nylon. Suitable for car use better replacement for original bumper and fender clips. Push in type, easy to fasten bumper fender flare and mud flap. Rivet post pressure expands legs for fast and tight fastening. Features Tough Fastener Removal Tool Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Multiple Application Locations A must have for any four wheeler owner to keep those fenders and splash guards attached and intact. Removable and Reusable Holds securely but is easily removed without damaging it for reuse. Just pop the post out with a fastener remover. Size: 120Pcs Car Retainer Clips plus Fastener Remover Specification: material: black nylon, suitable for car Use better replacement for original old worn broken one. Push type, easy to fasten.

• 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
• 6 different Push pin rivet for many brand vehicles.
• Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
• Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
• PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

User questions & answers

Question:	Will these fit my 2011 altima base model rear bumper
Answer:	The fan is probably able to fit a large number of different models due to a similar mother board layout, but I do not know 100% for sure - I searched for compatible fans and bought one. The issue is with the pin connector. Open up the computer and look at your connector (is it a 3 pin or 4 pin) as that is likely to be the bigger issue.
Question:	Would any of these fit a cadiliac 2006 dts the bunker and back third brake light
Answer:	5 cm
Question:	Can I Use these clips on a 2001 jeep grand Cherokee
Answer:	Yes, I installed in an HP 360 convertible with no issues.
Question:	Can these screws fix the 2007 nissian murano and a 2008 chrysler town and country
Answer:	No extra parts needed. It comes with dielectric gel for reattaching the cpu and replacement tape for the heat sink. Uses the existing screws so keep those from the old fan.

Product features

Specification:

4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).

6 different Push pin rivet for many brand vehicles.

Material: Made of durable nylon.

suitable for car use better replacement for original bumper and fender clips.

Push in type, easy to fasten bumper fender flare and mud flap. Rivet post pressure expands legs for fast and tight fastening.

Tough Fastener Removal Tool

Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.

Multiple Application Locations

A must have for any four wheeler owner to keep those fenders and splash guards attached and intact.

Removable and Reusable

Holds securely but is easily removed without damaging it for reuse. Just pop the post out with a fastener remover.

Product description

Fit Under Low Ground Clearance Vehicle

Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches.

The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position.

Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability.

Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection.

- Extra Low Profile

- Lifting Range from 3-1/2 inches to 14 inches

- Patented bypass device protect over pumping

- Built-In Safty Valve Provides overload protection

Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Take one now to access to the areas you never access before.

• Extra low profile
• Lifting range of 3-1/2 inches to 14 inches
• Patented bypass device protects against over pumping for safe operations
• Built-in safety valve provides overload protection. Rust Resistant
• Heavy duty steel construction provides long term durability

User questions & answers

Question:	Does it come with a portable case
Answer:	No, but the box it comes in is pretty sturdy. If you remove the cardboard packing the jack easily slides back into the box. The inside bottom of the box is reinforced. Not sure how long it will hold up, but it’s better than nothing.
Question:	Will this raise a 2011 cadillac cts enough to get jack stands underneath it? i want to change transmission oil ... thanks
Answer:	A Cadillac CTS is roughly 4,300 pounds. Which is a little over the capacity of this jack. As long as you're placing it on jack stands and you don't leave the jack holding it too long, it should be okay. Although all the armchair experts on this site will implore you to buy a 3 or 4 ton jack. Just remember to always put the car on jack stands and do your work on a flat, level surface.
Question:	Can anyone tell me the outside diameter of the lifting cup? Thanks
Answer:	The cup itself is 2 1/4 inches, with the inner portion (The part that spins freely, with the 4 tabs) 1 7/8ths, and the tabs extend about 1/4 inch up from the cup. Hope this helps.
Question:	What kind of oil does this take? The screw was loose when it was shipped to me and some oil had poured out into the box. I just want to top it off
Answer:	hydraulic jack oil. The screw IS loose upon arrival. If you read the SHORT instructions....this (grey) screw is HOW TO LOWER the jack when you are done lifting and have supported the weight/vehicle with jack stands. Turning just a bit using the handle you used to pump up the vehicle - you will notice it lower ever so gently. ONCE it is fully lowered - it is best to immediately turn the screw clockwise until it stops - this prepares the jack for its next use. Do this so you will not forget it is closed. IMO - some people with oil spewing - did not 'get it' how important it is to assure the valve is closed BEFORE raising the vehicle.

Product features

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

About Us:

Our ProLift hydraulic automotive jacks, lifts and garage equipment range will cater to many 'do it yourself' enthusiast. The product line includes bottle jacks, floor jacks, garage jacks, aluminum jacks. scissor jack, lawn mower lifts, utility lifts, chokes, dirt bike lift, creepers, mechanic seats and more! Explore our range on the products page.

ProLift has become a global presence in the go to automotive garage maintenance equipment with locations in the United States, The Netherlands, Taiwan and Australia. We create dependable and reliable performance hydraulic equipment.

Product description

This 2-PACK solid rubber wheel chocks feature all weather construction and a rubber traction pad that make them the perfect choice to keep your vehicle or trailer secure in any climate. The non-slip surface is oil resistant to provide superior traction. wheel chocks are lightweight yet durable enough to keep almost any vehicle or trailer in place.

• Approximate size: 8 inch length x 4 inch width x 5 inch height
• Features all weather construction and a rubber traction pad that make them the perfect choice to keep your vehicle or trailer secure in any climate.
• Includes built-in handle for easy placement or positioning and rubber traction pad with oil resistant surface to prevent slippage
• Designed to perform better than plastic or resin-made wheel chocks
• Lightweight yet durable enough to keep almost any vehicle or trailer in place

User questions & answers

Question:	after wheels of a vehicle roll up against these to hold vehicle in place, can you still pull them out from wheel before backing off of them
Answer:	No. I am not able to with our fifth wheel. We have to pull off
Question:	So, how do you keep these from slipping on a painted garage floor? Are they returnable
Answer:	Put the flatter side of the chock against the garage floor, and the ribbed side toward the tire, for the most traction on a smooth surface. Then give the chock a good kick or mallet thump against the bottom base to wedge it as tight as possible under the tires.
Question:	Will these work for a Honda Fit parks on an uphill for a couple months
Answer:	I would expect they would. They are very sturdy. They should fit on a car with low clearance from the ground. Make sure where you place them the street is clean of debris.
Question:	Will these work for the black tank
Answer:	What are you trying to do - maybe level an RV so the black tank operates properly or drains? If so, then no - these are chocks, and only stop wheels from rolling. They are not levelers, and you would never get a vehicle to stay up on them.

Product features

Rigid design

This chock is designed to perform better than plastic or resin-made wheel chocks.

Versatile

Features built-in handle for easy placement or positioning and rubber traction pad with oil resistant surface to prevent slippage.

Compact And Durable

MaxxHaul wheel chocks are lightweight yet durable enough to keep almost any vehicle or trailer in place.

Product description

The Torin BIG RED T10152 steel scissor lift jack car kit is a collapsible, compact jack can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car. Engineered using a drop forged alloyed steel construction for quality and durability and features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity. It's equipped with an extra-wide base which adds stability and strength. The 1 piece handle delivers on-the-spot quick response and speed to get the job done quickly and safely. This unit is 100% factory tested for reliability and safety to meet and comply with ANSI/ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.

• Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
• Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
• Engineered using a drop forged alloyed steel construction for quality and durability
• Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
• Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Can you tell me the width of the base on this jack? Thanks. RMW
Answer:	The base is 6&1/2" wide, is 4&1/2" deep at the ends, but narrower at the middle. Realize that made-in-China items can quickly change depending on their latest vendor, i.e., low-bidder. I'm happy with mine, although the picture for mine showed it had a flat top, and mine has two small bumps that protrude--although only a very little bit. These might provide stability in some situations, don't pose a problem in most, but I'd have peferred that the top be flat.
Question:	what is the fully collapsed height -- will it fit within a gap of 3-3/4 inches
Answer:	Yes. It will clear that distance. Its collapsed height is 3 1/2 inches.
Question:	Can you tell me about the length of the jack when it closed , I want to see if it match it's place in my car ( Toyota Camry
Answer:	When completely closed, as flat as can be, this item measures 5" high, 5" wide and 18" long.
Question:	Will this jack for toyota corolla le 2009 model
Answer:	I'm sure it will work for the 2009 Toyota Corolla. The limit on the Jack is 3,000 pounds. This jack should easily lift the weight from one side or one corner. Be sure the jack is firmly under a frame member. I would recommend a Jack stand or blocks to place under the frame in the event of a mishap.

Product features

Torin BIG RED Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity