14 best atv jack lifts

• COMPACT AND FUNCTIONAL - This compact hydraulic jack makes it safe and easy to service your motorcycle or ATV through a simple lifting mechanism which is able to hoist up to 1500 lbs
• HIGH-QUALITY MATERIALS - Made with a durable steel frame and high-quality, non-slip rubber lift pads, this jack is able to lift your machine without damaging itself
• SAFETY FIRST - Comes with a 3-position safety lock mechanism, fix your vehicle without worry
• EASY TRANSPORT - Built with a handle and swivel casters, the jack is easy to transport and simple to stow
• MANUALLY OPERATED - The jack can be operated manually by foot pedal ; Comes with two tie-down straps, two adapter bars, and a detachable handle

User questions & answers

Question:	Will this work for a vucan
Answer:	Hi Kermit, sorry it's been a while since I logged on to Amazon. I'll start by saying that I used a 62 doing surveys as a contractor with DHS. It was a fine unit and did its job. In my work I never had to push any of its features to their limit so for us, it was very adequate. Having said that, when it came time for me to purchase a GPS for myself, I wanted the newer model, so therefore I went with the model 64. Keep in mind, both are base models for their respective series, so they do not have the fancier features of the s and st. As far as comparison, the 64, being newer has a bit more, but not that you'll necessarily notice. It depends on your use 64 62Built in Memory: 4GB vs. 1.7GBWaypoints: 5000 vs. 2000Data cards: Accepts microSD vs. Does not acceptGeocaching: 250,000 preloaded vs. paperlessHigh SensitivityReceiver: GLONASS AND GPS vs. NoneThere are complete lists on the internet as to which does what. I believe they are both pretty good units but the 64, being newer, is updated with a few more features and a bit more memory. the only drawback I can think of is that it lists the battery capacity at 16 hours vs 20 for the 62. In addition, I don't know if you can even get the 62 anymore. Once again, having used both, I see not major difference if you're just going to use it for some hiking, biking, getting your position, bearing, etc. Unless you're a scientist or you're going to load all kinds of data or save copious amounts of data or the like, I doubt you'll even notice the difference. I do believe the GLONASS does make a big difference in speedy acquisition of satellites, though. Sometimes it's acquired a fix even seconds after I turn it on. Is it a big deal? Not really, but hey, that might speak to the sensitivity of the unit in the field. So far, I'm happy with it. I hope this helps answer some of your questions.
Question:	What is the height of this jack in it's compressed possion
Answer:	Hi Eric! Thanks for the great question! The Spot X 2-Way Satellite GPS Messenger requires a subscription to use the device. A major advantage is that you can commit to a service plan that is a Month to Month commitment and only costs $14.95 Per Month. If you decide that your willing to sign up for the year, the rate drops to $11.95 per month. If you have any other questions, feel free to reach out!
Question:	Jack doesnt work with motorcycle
Answer:	Hi Brian! The Spot X GPS Satellite SOS Messenger requires that you have a service plan to utilize all of the unit's capabilities. Features such as the Waypoint you mentioned; will only work once you have set this up. The good news is that you do not have to commit to an annual service agreement. Instead, you can pay month to month without the long term commitment. So, for example, If you locked in a time to travel or hike and have advance notice, you can time the monthly service plan to suit your needs and turn off the subscription at your discretion. I hope that helps!
Question:	How log are the lift pads and what is the width of the lift cradle
Answer:	Yes, SPOT GEN4 provides 2-way satellite messaging when you’re off the grid or beyond reliable cellular coverage.

Product features

VIVOHOME 1500 LB Motorcycle Hoist Jack

VIVOHOME’S Motorcycle and ATV lift is made from high-quality steel designed to be easy-to-use, portable, and strong enough to handle small personal vehicles like dirt bikes, motorcycles, jet skis, snow mobiles, and ATVs. After the machine has been loaded onto the jack adjustable locking screws secure the wheels in place to provide stability and safety. Along with a three-position safety lock, this jack will secure any machine you might need to repair.

More About The Product:

Product Specification:

• Material: Steel
• Package Dimensions: 32.28”L*16.34”W*4.92H”
• Item Weight: 62lbs

Package Include:

• 1 x Lift Jack
• 1 x Handle
• 2 x Tie-Down Straps
• 2 x Adapter Bars
• 1 x Manual

Non-slip Rubber Pad

Prevent the projects slipping while lifting up

Swivel Casters

Easy To move, position And transport

Durable Footplate

Easy to operate, time saving and labor saving

Product description

Product Dimensions:17.6 " x 10.6" x 4.5" Minimum Height: 3.25" Maximum Height: 13.25" Weight Capacity: 1100 lbs. Platform Dimensions: 16" x 10"

• Solid steel construction in a blue and black powder coated finish
• Simple crank operation
• Designed to fit most motorcycle models
• For use in the garage, shop, or at the track
• 10.6 Inch Wide Deck

User questions & answers

Question:	Does this roll
Answer:	I would suggest using this in the fx loop of your amp
Question:	Will this lift front end of a harley tri glide?Also will it block getting to oil drain hole
Answer:	Yes, you can have any combination of the effects running at the same time: 1, 2, or all 3.
Question:	How many threads per inch on the shaft
Answer:	No. You dial on the echo repeat rate with the little knob.
Question:	How many turns of the crank are required to raise the jack to full height
Answer:	Yes. You can use any guitar pedal with bass but the frequencie spectrum isn't meant for it.

• This is highly durable
• Patented design features both a removable Lift saddle and padded Lift rails
• Lifting capacity of 4, 000 pounds
• Locking safety bar holds jack in place once raised
• Easily lifts cars, trucks, atvs or removing/replacing transmissions or differentials.Handle Length:40 inches
• Patented design features both a removable lift saddle and padded lift rails
• Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames

User questions & answers

Question:	Does it work on 3 ton jack stand too
Answer:	Yes, I used it to raise an air conditioning unit out of the windowsill.
Question:	how high does that jack go off the ground? I need
Answer:	Yes it should work with a 650. Really any motorcycle, scooter. You would slide it in between the front and rear wheel not centered but balanced. I welded tabs and bolted to my table. Then I welded a ring on both sides for a ratchet strap. It is very strong, reliable and sturdy. Use a 7/8 socket to lift and lower the scissor jack it works better than the hand crank that comes with it. Definitely a good buy. Hoping this helps- Mickey
Question:	I was curious with the jack fully extended, what is the height of the jack? I have a Toyota FJ with a 3 inch lift which puts it at 11 inches
Answer:	I like the jack my Harley limited loaded weight at least 900 lb picks it up but no problem good Jack just don't use a air gun on it you got to use a hand ratchet
Question:	what is the minimum height required for this jack to slide under? I need to determine if it will fit under my car
Answer:	Dear customer, our lift is mainly used to lift motorcycles for maintenance. And the weight capacity is 1100 lbs. For safety reasons, we do not recommend that you use it to lift your pool table.

Product features

Powerbuilt 2 Ton Triple Lift Floor Jack

Get rid of your floor jacks, transmission jacks and ATV jacks. The 2 Ton Triple Lift jack is three jacks in one! This innovative jack has a patented design that lets you lift cars, trucks, motorcycles or ATVs with ease.

The Triple Lift slashes the expense and hassle of purchasing, maintaining and storing multiple jacks and jackstands. It's the one jack that easily lifts almost anything with wheels, and works on vehicle transmissions and differentials too.

The secret to the Triple Lift is the patented design that features both a removable lift saddle and padded lift rails. This flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.

A locking safety bar holds the jack in place once the vehicle is raised, which eliminates the hassle of supporting a lifted vehicle with jack stands. Built-in tie-down loops make it easy to secure motorcycles in place for added stability.

• NICE APPEARANCE & HIGH QUALITY - Heavy duty and solid steel construction in a red and black powder coated finish. The paint is for easy cleanup, oil-resistant, grease-resiatant and dust-resistant
• ANTI-SLIP DESIGN - Top surface is designed a durable rubber pad with striped veins, which is benificial to prevent slippage and scratching
• MULTIPURPOSE - The jack fits most motorcycle models including cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc
• EASY TO OPERATE - Attached with a free crank for easy operation. Just rotating the metal sleeve to lift a motorcycle easily, a really excellent helper for motocycle repair
• DURABLE & HEAVY DUTY - Maximum lift height: 14.5 Inch. Total weight capacity: 1100 lbs. For use in the garage, shop, or at the track

User questions & answers

Question:	What is the size of the bolt that lifts the table? Are the threads Acme or sae
Answer:	There is only about 1/8” space between roller and platform.
Question:	My Harley is lowered and I need a stand with no more than 3.5” to slide under it. Is this exactly 3.5” height when completely folded down? thank you
Answer:	As long as the air consumption is correct.
Question:	what is max hight
Answer:	It definitely does not require 15scfm. My compressor is rated at 5.8@90psi and will keep up with this gun all day long
Question:	Considering bolting plywood to the platform. Concerned about bolt head interfering with mechanism. Any space between roller and underside of platform
Answer:	It uses 15cfm of air. But man if you have a shop Compressor and get the gun set right It paints nearly as well as my devilbiss gti pro which uses 16cfm of air also. I would love to get the 1.8 version one for primer. Give it 25 to 29 psi I stay around 2 bar. If you wanna lower air consumption use smallest fan as possible to get the desired finish and project time. A great gun for a smaller compressor is the mp400 Cartman sells I'm about to buy another. It's a really great gun as well. Most of the parts will interchange with the 400 series and its marked right at 4 to 7 cfm. I can use it with a 1.8hp 26 gallon kobalt air compressor. With minimal recover time. Has a nice fan and droplet size. But if you have a shop compressor that can put out 12 15cfm at least get both but this one can lay a flat mirror shine. I've done two jobs and ask people at work which gun did what. This gun will spray just like a gti pro. I bought this gun when Cartman first came on amazon. It was like 25 back then and I'm not surprised in the least it's 41 now. I'm getting another for back up. For any professional spray painters, serious DIY guy with a shop compressor. If you have a home portable compressor you will be taking lots of breaks if you paint large projects. I'm using it on 2 stage 80 gallon 175psi 27.5cfm at 175 pai compressor. It runs the mechanic shop, welding shop and my paint booth. And 99 percent of the time I'm the only one using it. And it runs it hard it'll keep 2 bar mostly until shop uses a impact or something. It'll be like 80 to 100 pai when I release the trigger. Regulator at the wall drops to 45psi under full air. So Ya hope that helps people it's a air monster but a beast of a gun. Any serious apprentice or DIY needs this gun and the mp400. Must haves. The mp400 is great for home 1.5-2.5 compressors. Small fan and wind fluid in some it'll take longer but use less air and get proper atomization

Product features

VIVOHOME Wide Deck Scissor Lift Jack 1100LB

VIVOHOME motorcycle center scissor lift jack with safety pin and wing design on each side, exhibits great stability and safety prevention, suit for cruisers, trikes, Can Am Spyders, ATVs, UTVs, etc. Release your hand to do more important jobs, perfectly the best partner in your repair work.

Enjoy The Fresh Ice with Cool Feeling

Product Specification:

• Product Dimensions:14.57 " x 9" x 4.5"
• Minimum Height: 3.25"
• Maximum Height: 13.25"
• Weight Capacity: 1100 lbs.
• Platform Dimensions: 16" x 10"

Package Included:

• 1 x Scissor Mini Lift
• 1 x Handle
• 2 x Adjustable Plate

Removeable Crank Handle

Wide Deck Base

Durable Center Shaft

Product description

Pit Posse just made working on your bike extremely comfortable. No more sitting in uncomfortable positions to get work done, we present the ultimate bike stand.

✔️ Hydraulic Scissor Lift lifts your bike to a comfortable work height

✔️ Foot pedal incorporated to lift stand effortlessly 

✔️ Adjustable height, from 13” thru 36” inches off the ground

✔️ Top platform at 13 3/4 x 16"

✔️ Safety loops to stabilize the bike and safety pin for extra insurance

✔️ Heavy-duty steel frame construction

✔️ Large oil drain hole

✔️ Oil & gas resistant rubber top

✔️ 300 lbs. weight capacity

✔️ 2 Year Warranty

Professional shop hydraulic floor jack stand that is designed to maximize your workspace. Read our reviews and see why bike enthusiasts are raving about this stand!

ADD TO CART NOW RISK-FREE WITH OUR 2 YEAR WARRANTY!

• ✅ A PROFESSIONAL LIFT FOR YOUR HOME/GARAGE/SHOP- This hydraulic scissor lifter is designed to allow you to repair your motorcycle, ATV, and dirtbike smoothly. Perfectly centers your bike with both wheels in the air, and you can adjust the height anywhere between 13 inches thru 36 inch off the ground. The top platform is flat and is 13.75 x 16 inch. This lift's capacity is up to 300 pounds.
• ✅ SAFELY WORK ON YOU BIKE WORRY FREE- This jack stand is heavy duty, made with thick gauge metal and keeps your bike safe. Includes safety loops that will help secure the bike and the heavy-duty steel frame construction and rubber pad make this lifter movement resistant and prevents metal to metal contact that can scratch, scuff and scrape your motorcycle.
• ✅ EASY TO OPERATE CLEAN WORK ENVIRONMENT- The lift has foot pedals with a hydraulic lift to make it quick and easy to lift or lower the stand, there is a large oil drain hole in the middle of the platform, and the top is made of rubber that is oil & gas resistant.
• ✅ DESIGNED FOR COMFORTABLE USE AND STORAGE- The scissor jack stand is sufficient to hold the bike's tires off the ground to store in the winter. The lift table eliminates the need to stoop or kneel while working on your motorcycle, giving you a comfortable work environment. The wide top platform makes the stand safer and distributes the weight on a broader area preventing accidental slips or movements.
• ✅ YOUR SATISFACTION IS OUR #1 PRIORITY- Pit Posse's stand is one of the best in the market. If you read the reviews, you know our lift is well known and used in many shops daily to ease the process of working on your bike. If you are not 100% satisfied, we will give you a full refund or a free exchange, no questions asked. We have a 2-year warranty! Send us a message, and we will gladly assist.

User questions & answers

Question:	Can you put the replacement wheels on this stand
Answer:	you can see the second photo, The floor support wide is 42.5", longth is 30.8".
Question:	Do you have a use manual for this
Answer:	The lowest height is 5.38ft(1640mm). you can see the forth photo
Question:	How quickly and quietly can it go from lowest height to maximum height? (For a magic trick). Assume I can hide the movement of the foot on the pedal
Answer:	We have 4 height(7.05FT,6.49FT,5.94FT,5.38FT). you can use this height 6.49FT. Also it depends on how tall you are.
Question:	What's the actual weight of this
Answer:	I cannot say whether that is with every unit but ours did smell. (I mentioned that in my review) We put it outside for a week and it is perfectly fine now. After a week of patience I must say that I am surprised how sturdy it is. I am 68kg, roughly 150lbs and it barely flexes when I am on it. So I guess it was worth the additional wait. And who knows, other units might not have the smell.

• ✅SECURE ELEVATION: A must-have for sport or dirt bike enthusiasts. The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.
• ✅SAFETY FOOT STEP LEVER: The large foot step lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease.
• ✅SOLID CONSTRUCTION: The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.
• ✅PORTABLE CONVENIENCE: The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.
• ✅NON-SLIP DESIGN: Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage. Safely holds up to 300 pounds.

User questions & answers

Question:	If you changed out the hydraulic jack would the Aussie lift rise any higher
Answer:	The devices which we are currently selling are October 2017.
Question:	What is the highest distance for that lift
Answer:	Unfortunately only US units are allowed to be sold in the US. Thank you
Question:	Can i use this to put the bike in my pickup truck if the truck bed height is lower than 36 inches
Answer:	The price is usually around 1/3 of the full price, but it will depend on the conditions of your beacon once it's sent to the battery replacement center. If you are in an emergency you can just notify the manufacturer and they should replace it for free.
Question:	Anyone have thoughts about using this as a transmission jack
Answer:	Unfortunately no. Every unit sold in the US is built with a US code.

Product features

Durhand 36” Foot Step Hydraulic Pump Lift for Small Motorcycles and Dirt Bikes

Bike maintenance and repair is a daily ritual for most riders, and knowing that your lift can keep up with your consistent schedule is important. Durhand’s adjustable lift features a non-slip rubber top, hydraulic foot step lever, and a portable 4- wheel design that will keep you riding. This portable lift is a convenient size, and the 4 easy to maneuver wheels help you take it from the garage to the track, the shop, or the trail. A sturdy steel frame, powder coated for rust and corrosion resistance, gives this lift strength, durability, and longevity. With a large surface area, topped with non-skid rubber padding, your bike will sit fully elevated with no slipping. We know you love your bike, so let us help take some of the stress out of your maintenance routine when you use our adjustable lift from Durhand.

Secure Elevation

A must-have for sport or dirt bike enthusiasts! The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.

Safe and Sturdy

The large footstep lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease. Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage.

Solid Construction

The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.

Portable Convenience

The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.

Features

• Large top surface lifts your bike off of the ground for better access for maintenance and repair
• 4 wheels make this lift easily portable from the garage to the track, shop, or trail
• Constructed from durable steel
• Hold up to 300 lbs
• Large hydraulic foot step lever design promote safety
• Non-skid rubber padding on the top surface will keep your bike from slipping off

Specifications

• Material: Steel, Rubber
• Color: Blue
• Overall Size: 17.75" L x 15.75" W x 36.5" H
• Top Size: 16.5" L x 13.75" W
• Adjustable Height: 13.75" - 35.5"
• Net Weight: 60 lbs.
• Weight Capacity: 300 lbs.
• Accessories Included: 2 U-type hooks, foot step pedal lever, rubber foot pad, 2 hooks, long rod

Product description

Specifications

This power jack is designed for use in the garage, shop, or at the track.

Designed to fit most motorcycle models.

This lift Jack features a rubber mat on the lifting platform to grip the bottom of the bike and increase stability.The mat will also prevent slippage and prevent scratches.



Product Dimensions:14.57 " x 9" x 4.5"

Minimum Height: 3.25"

Maximum Height: 13.25"

Weight Capacity: 1100 lbs.

Platform Dimensions: 14.5" x 9"

• 1,100 lbs scissor lift jack for motorcycle bike with flat bottom,Simple crank operation
• Widen deck (wide 9'') with safe rubber surface to prevent slippage and scratching
• Solid & Sturdy steel construction with a red paint finish
• This motocycle lift repair stand is Designed to fit most motorcycle models,For use in the garage, shop, or at the track
• Platform Dimensions: 14.5" x 9",Weight Capacity: 1100 lbs.

User questions & answers

Question:	How stable is this lift side to side as viewed from the lift handle? I will support only 25 pounds, but stability is necessary for accuracy
Answer:	Even if there weren't holes you could drill them and Volta simple board on it's not that hard the unit works well lift just fine actually very easily my bike weighs a little over 530
Question:	My kawasaki 900 vulcan classic's engine protrudes below the chassis., making all the weight of the bike rest on this point of contact. not a good idea
Answer:	I do not know. I use it on my Sporty
Question:	I see this can be used for oil changes. I have a Suzuki Intruder but how do you get a pan to catch the oil if this sits directly on the platform
Answer:	Might be a bit sketchy. It lifted my 14 strom okay. 550 pounds... street glides...might go with something more secure. I had to use other means just to balance mine when removing wheels. Hope this helps. Good luck!!!
Question:	How high does it extend to? I have a dirt bike that has a foot of clearance
Answer:	Yes the saddles are actually height adjustable. They are mounted on a screw and can be spun 360 degrees, but it also adjusts the height.

Product description

The Torin BIG RED T64017 service jack is the ideal solution to your motorcycle, snowmobile, ATV, and UTV lifting needs. It features a lifting range of 5-1/8" to 16-1/8" with a 3/4 ton (1,500 lb) load capacity. This wide-load bearing jack is intended for the powersports enthusiast for maintenance or even lifting for off-season storage. The Torin BIG RED T64017 service jack is equipped with 6 locking positions and includes 2 locking swivel casters, a bottle jack, and a pulling bar. The powder-coat finished exterior provides long-lasting durability. Includes a limited 1 year manufacturer warranty.

• Ideal solution to your motorcycle, snowmobile, ATV, and UTV lifting needs
• Features a lifting range of 5-1/8" to 16-1/8" with a 3/4 ton (1,500 lb) load capacity
• Equipped with 6 locking positions and includes 2 locking swivel casters, a bottle jack, and a pulling bar
• Wide-load bearing jack is intended for the powersports enthusiast for maintenance or even lifting for off-season storage
• Powder-coat finished exterior provides long-lasting durability; Includes a 1 year limited manufacturer warranty

User questions & answers

Question:	How long are the lifting pads
Answer:	It’s no more than 5-6 in.
Question:	what is the collpased size? I have 4.5in clearance under my Can-am Spyder
Answer:	Bought it to use it with my bike but since the underneath of my bike is round it, it won't work. I use it for my lawn mower.
Question:	Did anybody used one of these jack on a stock Sportster Iron
Answer:	Pads are 2’’ wide and 12’’ long and there is approximately 1’ between the pads. My street glide is off the ground on the jack now for the winter. Great piece of equipment.
Question:	what are the dimensions of this item
Answer:	Yes. You can select the shipping method during check out

Product features

Torin BIG RED Motorcycle / ATV Jack: 3/4 Ton (1,500 lb) Capacity

Wide Load Bearing Platform

5 Locking Positions

3/4 ton (1,500 lb) Capacity

Locking Swivel Casters

Product description

Giving you the Room and Stability to Work Safely on Lawn Mowers in Three Easy Steps

Pro Lift T-5305 Heavy Duty Lawn Mower Lift Kit is a 500 Lbs. lawn mower lift that provides the ability to lift 26-1/2 inches from ground to wheel saddle to give you the maximum space to perform necessary mower maintenance, such as blade works, cleaning debris, oil change, and more.

It is built with the welded solid steel construction with the four steel wheels and the positive dual locking safety latches.  With the universal design, Pro Lift T-5305 is adjustable to fit most zero turn garden tractors, riding mowers, ATVs and even push mowers.

It has the ability to hold a minimum of 19-1/4 inch span and up to a 42-1/2 inch span mower.

In addition, it features the hydraulic foot pedal operation. It gives you the option to lift up your mower effortless.

To lower the lift, put the mower in neutral and raise Lift Platform slightly to disengage Height Locking Levers, then use the release knob to carefully turn release valve counterclockwise, lowering the load slowly.

- Safety Lock for Safely Supporting the Load

- Rubber Padded Platform to Prevent Scratching and to Protect your Machine

- Non-Slip Foot Pedal Allows Effortless Lifting the Load

- Easily Maneuverable and Adjustable for a Wide Variety of Machine

Specifications

- Capacity: 500 Lbs

- Lifting Height: 26-1/2 Inches

- Wheel Span: 19-1/4 to 42-1/2 Inches

- Base Size: 40 x 15-7/8 inches

- Item Weight: 89 Lbs

Pro Lift T-5305 Lawn Mower Lift is backed by 90 Days warranty from the date of the purchase.

• 500 LB CAPACITY - T-5305 Lawn Mower Lift is built with the welded solid steel construction with the four steel wheels and the positive dual locking safety latches.
• Over 26-INCH Lifting Height - It provides the maximum space to perform necessary maintenance, such as Blade Works, Cleaning Debris, Oil Change, and more.
• 19-1/4 to 42-1/2 INCHES WHEEL SPAN - With the adjustable wheel span, it fits on most zero turn garden tractors, riding mowers, ATVs, and even push mowers.
• EASY TO LIFT & LOWER - Position mower tires securely on wheel baskets and centering the load on lift. To lower lift, raise Lift Platform slightly to disengage Height Locking Levers then use the release knob to carefully turn release valve counterclockwise, lowering the load slowly.
• WARRANTY - Pro Lift Plastic Creeper is covered 90 Days limited warranty from the date of purchase. Due to a defect in material or workmanship under normal usage, we will repair or replace at its option.

User questions & answers

Question:	Will this work for a John Deere X500 , 54 inch cut multi-terrain tractor
Answer:	Hi Amazon Customer. Yes, all our riding lawn mowers are equipped for attaching both rear- and front-mounted lawn and garden accessories like trailers, garden dump carts, snow blades, snow throwers, graders, spreaders, dethatchers, aerators, brooms, rollers, and more. You can easily adapt your tractor to the season and/or task! Thank you so much for considering Husqvarna for your outdoor power equipment needs.
Question:	Can I buy just the jack for this, it just quit working on me, probably an issue with the seal but regardless I need a new hydraulic on it
Answer:	Briggs Stratton twin V 24
Question:	is the wheel base measured from the outside of the tire or the inside my tires are 14 inches apart will it fit
Answer:	The transmisions for Husqvarna are sourced from other companies such as Hydrogear. They don't have Husqvarna part numbers. If you are having a major problem with your transmission, I suggest reaching out to a local Husqvarna dealer for diagnosis and repair.
Question:	Can this work with a snow blower tractor attachment
Answer:	The answers from the manufacturer and sellers are so wrong as to be scary. 24v stands for the 24 horsepower V twin engine. There is not a 24 volt battery in tbis and I find it scary that the "experts" dont know the first thing about this product. What is going to happen if there is a problem when someone tries to hooks 2 12volt batteries up to this and fries the electrical system and starts to on fire? Uggh

Product features

500 LB Capacity

T-5305 Lawn Mower Lift is built with the welded solid steel construction with the four steel wheels and the positive dual locking safety latches.

It provides the ability to lift 26-1/2 inches from ground to wheel saddle to give you the maximum space to perform necessary mower maintenance, such as blade works, cleaning debris, oil change, and more.

It is built with the welded solid steel construction with the four steel wheels and the positive dual locking safety latches. With the universal design, is adjustable to fit most zero turn garden tractors, riding mowers, ATVs and even push mowers.

In addition, it features the hydraulic foot pedal operation. It gives you the option to lift up your mower effortless.

To lower the lift, put the mower in neutral and raise Lift Platform slightly to disengage Height Locking Levers, then use the release knob to carefully turn release valve counterclockwise, lowering the load slowly.

Specifications

• Safety Lock for Safely Supporting the Load
• Rubber Padded Platform to Prevent Scratching and to Protect your Machine
• Non-Slip Foot Pedal Allows Effortless Lifting the Load
• Easily Maneuverable and Adjustable for a Wide Variety of Machine
• Capacity: 500 Lbs
• Lifting Height: 26-1/2 Inches
• Wheel Span: 19-1/4 to 42-1/2 Inches
• Base Size: 40 x 15-7/8 inches
• Item Weight: 89 Lbs

Over 26-Inch Lifting Height

Provides the maximum space to perform necessary maintenance, such as Blade Works, Cleaning Debris, Oil Change, and more.

19-1/4 To 42-1/2 Inches Wheel Spana

With the adjustable wheel span, it fits on most zero turn garden tractors, riding mowers, ATVs, and even push mowers.

Easy To Lift & Lower

Position mower tires securely on wheel baskets and centering the load on lift. To lower lift, raise Lift Platform slightly to disengage Height Locking Levers then use the release knob to carefully turn release valve counterclockwise, lowering the load slowly.

• PREMIUM QUALITY - VIVOHOME motorcycle lift jack is constructed of heavy duty and solid steel with black powder coated finish which is oil- and dirt-resistant; No trouble with cleanup after use and enjoy its long-term service
• LARGE & ANTI-SLIP PLATFORM - Top surface measures 14.6"×9", plenty large enough to raise and lower a transmission or a motorcycle; Designed with a durable rubber pad with striped veins, which help to avoid slippage and scratching
• MOVABLE & VERSATILE APPLICATION - The lift jack with dolly tray which has 4 steel casters can be easily move anywhere; Fits transmission and most motorcycle models like cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc
• EASY TO OPERATE - Attached with a crank handle for easy operation; Just rotating the metal sleeve to lift a motorcycle easily, save much labor and work more efficiently; Recommended for tire, oil, filter changes, a really excellent helper for motorcycle repair and maintenance
• HIGH PERFORMANCE - With a load capacity of 1100 lbs the lift jack can raise motorcycle to a comfortable level for your work between 5.1"-17.7" (with dolly) or 3.75"-14.95" (without dolly); The jack itself can be simply lifted out of the dolly tray and set on the ground; Ideal for use in the garage, shop or at the track

Product features

VIVOHOME Wide Deck Steel Motorcycle Lift Jack with Dolly 1100 Lbs

VIVOHOME wide platform heavy duty steel motorcycle lift jack is designed with dolly attached with 4 swiveled wheels, which help you to move heavy things conveniently, suitable for transmission, bikes and motorcycle. Just rotate he crank handle easily, you can raise or lower your lover motorcycle to a desired height for your repair and maintenance work. Release your hand to do more important jobs, perfectly the best partner in your garage, shop or at the track.

Know More About Product

Product Specification:

Color：Black

Material：High-quality steel

Capacity：1100 LB

Top Platform Size：14.6’’×9’’

Lift Range（With Dolly Tray)：5.1’’-17.7’’

Lift Range（Without Dolly Tray)：3.75’’-14.95’’

Package Size： 16.5’’×16.5’’×4.7’’

Easy to Operate Crank Handle

With the included crank handle you can raise or lower motorcycles to a comfortable height for your repair and maintenance work effortless. Save your time and labor and work more efficient.

Separable Dolly Tray with Swivel Casters

The heavy duty motorcycle lift jack is designed with a dolly tray mounted with 4 steel casters which make it convenient to transfer heavy machines anywhere you need. Meanwhile the jack itself can be easily lift out of tray and set on the ground.

Wide & Anti-Slip Platform

Features a wide deck measuring 14.6"×9", fits transmission, bikes and almost any model of motorcycles, ATV, etc. Covered with rubber pad that prevents slippage and scratching.

Product description

Apextreme:

Apextreme Motorcycle lift is made from high-quality steel designed to be easy-to-use and strong enough to lift motorcycles like adventure touring motorcycles, cruiser bikes, and street bikes. Can use in the garage, shop, or at the track.

 

Features: 

High-quality steel construction, firm and durable

Durable rubber non-skid cover on the platform

Max. capacity can reach up to 1100 lbs

With a free removable galvanized crank handle 

 

Specification:

Product Dimensions: 14.6 " x 9" x 3.5"

Platform Dimensions: 14.6" x 9"

Package Size: 17.3’’x10’’x4’’

Minimum Height: 3.75"

Maximum Height: 14.95"

Weight Capacity: 1100 lbs.

Material：High-quality steel

 

Package Included:

1 x Motorcycle Lift

1 x Crank handle

 

Functions: 

Lift your motorcycle when you need to repair it. It can save you a lot of effort.

 

Application:

This jack can use in the garage, shop, or at the track. Can fit most motorcycle models.

 

Tips:

If you have any questions or dissatisfaction with our products, please contact us by email, and our customer service will reply and help you solve the problem within 24 hours.

• [SOLID CONSTRUCTING & RUST PREVENTION] - Solid steel construction in black powder coated finish which is for oil-resistant, grease-resistant and dirt-resistant. Galvanized treatment accessories to prevent rust.
• [NON-SLIP DESIGN] - Wide top surface desk design with a durable rubber pad which has striped veins to prevent slippage and scratching.
• [WIDE APPLICATION] - The lift fits most motorcycle models including cruiser bikes, street bikes, adventure touring motorcycles, etc.
• [OPERATE SIMPLY] - Come with a free Galvanized Crank Handle which is very easy to operate. Just rotating the metal sleeve to lift your motorcycle easily, a really excellent helper for motorcycle repair.
• [DIMENSIONS & LOAD-BEARING] - Lift range: 3-3/4 in. to 14-4/5 in. Platform dimensions: 14.6'' x 9''. Weight Capacity: 1100 lbs.

User questions & answers

Question:	Could this be used for lifting a pool table? I want to remove the area rug I have underneath it without disassembling the table
Answer:	Yes. It is a radio frequency- sat freq. may not work inside a cave, deep and narrow canyon, or below a multi-level parking garage.
Question:	Can i use this jack on a can-am spyder
Answer:	Yes it will record the entire hike or trip. Important though is to clear the previous track before starting a new one, once you are at the start of your new trip. Then when you complete the hike/trip save the track with a fitting name so you can then load it into basecamp or the much more useful earlier version , mapsource.
Question:	How long will it take to arrive
Answer:	I have the 64s. The 64st only has the US 100k topos included. I have the Garmin Southwest and West 24k maps loaded. If you want ROUTABLE road maps for the WHOLE USA you can get the navigator maps from Garmin or use the free ones which I use from openmapchest.org. They are very good. I have ALL the maps loaded on the SD card at once and it is easy to switch between them. The unit does have a micro SD slot under the battery.
Question:	Can it be used for a Harley fatboy
Answer:	A big advantage, with the 64s I can exchange off-road maps and planned routes from other racers GPS's in the field using the units radios (bluetooth/ANT). With the basic unit, I understand you have to connect your GPS to a computer using the USB cable. If all you do is hike by yourself, the basic unit will do. Remember, the 64s does not have US topo maps. You will need the 64st.

Product description

Designed of durable and solid structure the hydraulic jack lift not only provides a reliable support during the operation but also for a long-term use. The lift table comes with non-slip hard rubber plate with strong locking springs to insure safe and sturdy stand when the loads are lifted and released. The hoist center stand with foot pedal lift makes it a great tool for motorcycle atv's lawn tractors dirt bikes mopeds and more.

• 300Lbs of Bearing Capacity: Lifting up to 300 lbs, the hydraulic scissor floor jack is perfect for tinkering on your dirt bike or small motorcycle.
• Enough Lifting Height: Lift height from 15 inches (min height) to 38 inches (max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle.
• Rubber Padded Platform to Prevent Damage: The wide top platform provides a safe, stable surface for your motorcycle while using the jack. And the rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.
• Safety Design: Lift table comes with non-slip hard rubber (gum) plate with strong locking springs to insure safe and sturdy stand. As well as when the platform has been raised to the working height, ensure the locking bar is engaged to prevent accidental lowering.
• Easy Operation: Easy to use foot pedal operation for raising and lowering, compared with the traditional lifting method, it is more labor-saving. As well as include all hardware to mount bike to stand securely

User questions & answers

Question:	what is the size of the platform
Answer:	I lifted a Volkswagen with it. In order to lift an large SUV , you probably need a platform for it to get the right height. I have a F150 & haven't tried to lift it yet
Question:	What is the weight capacity
Answer:	I used it to lift my Chevy C10 66 All Steel way over its weight Factor it works pretty good you're only lifting 1/4 of the truck
Question:	How do the foot peg hooks work/ how well do they work
Answer:	I own a 2016 Chevy Traverse. I was able to get the tires off the ground in order to change the tire.
Question:	It really takes 70 strokes to lift it fully
Answer:	Used once this week, seems like a good quality build, not for constant use (like a garage repair tool) but smoothly operated and lug nut wrench works well about 90 to 100 foot pounds of torque. Bought for my wife she loves it no wrestling with a clunky jack or spinner thingy. Lol

Product description

Elevate your motorcycle or ATV for minor repairs, oil changes, cleaning and more. The heavy-duty lift has a 1700 lb. capacity and easy foot-pedal operation for lift and release. Lift range: 4.5" to 14.5”; welded safety locks at 9", 12", 14.5". Extension T-Handle included for improved maneuvering. Jack lifting surface stands 4.5" fully collapsed, be sure your machine has enough clearance before purchasing this product. This jack is intended for lifting only. Always use front and rear wheel supports.

• Hydraulic motorcycle/ATV jack with rubber saddle pads
• Foot-pedal operated hydraulic lift; Lift range: 4.5" to 14.5"
• Heavy-duty caster wheels and powder coated steel frame
• 1700 lb. Capacity
• Two-year warranty

User questions & answers

Question:	Is this made for long term lift
Answer:	I've had my bike on the lift for a solid 4 months now. I don't know if that's what it's designed for but it's holding.
Question:	is there a replacement jack for this? mine wont hold or jack up
Answer:	I have a road glide special And hold the bike no problem Probably it is defeated get another one Exchange it
Question:	How fast does this ship? it says 6 days to deliver. i have prime, so i expected it to be here in 2 days
Answer:	DETAILS: This item will be shipped by ground transportation and may take up to 5 business days to be delivered.
Question:	What is the length of the lifting pads? And, how much distance is between them
Answer:	they are about 10 inches long and possibly close to 12 inches apart. I have a 2007 Harley Deluxe and it lifts it perfectly.

Product description

300Lbs Hydraulic Scissor Floor Jack is ideal for Dirt Bikes, Small Motorcycles and smaller ATV's. Lift height from 13" (min height) to 36"(max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle so you can enjoy tinkering. Once the desired height is achieved, a locking bar secures the height, ensuring the lift never drops from accidental contact with the release pedal

Features:

• When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning
• Easy to use foot pedal operation for raising and lowering, compared with the traditional lifting method, it is more labor-saving. As well as include all hardware to mount bike to stand securely
• Wide top platform provides a safe, stable surface for your motorcycle while using the jack. The rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping
• Lift height from 13-1/2" (min height) to 36" (max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle
• Lift table comes with non-slip hard rubber (gum) plate with strong locking springs to insure safe and sturdy stand. As well as when the platform has been raised to the working height, ensure the locking bar is engaged to prevent accidental lowering
• Lifting up to 300 lbs, the hydraulic scissor floor jack is perfect for tinkering on your dirt bike or small motorcycle

Specifications:

• Color: Red
• Operation Function: Hydraulic Foot Pedal
• Base Plate Size: 16" x 14"
• Min Height: 13"
• Max Height: 36"
• Max Weight Capacity: 300lbs
• Assembly Required: Yes

Package Content:

• Motorcycle Scissor Lift
• Hardware
• Manual

• Easy to use foot pedal operation for raising and lowering, compared with the traditional lifting method, it is more labor-saving. As well as include all hardware to mount bike to stand securely
• Lifting up to 300 lbs, the hydraulic scissor floor jack is perfect for tinkering on your dirt bike or small motorcycle
• Lift height from 13-1/2 inches (min height) to 36 inches (max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle
• Wide top platform provides a safe, stable surface for your motorcycle while using the jack. The rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping
• Lift table comes with non-slip hard rubber (gum) plate with strong locking springs to insure safe and sturdy stand. As well as when the platform has been raised to the working height, ensure the locking bar is engaged to prevent accidental lowering

User questions & answers

Question:	Does this come with Foot Rest Clamps
Answer:	Yes it should fit as the adaptors are adjustable.
Question:	The weight is described as 25 lb. Is this the correct weight ? Usually it is about 70lb
Answer:	It was made in the blacksmiths shops of asgaurd.
Question:	Planning on using this for lighter work. With the wheels locked, fully extended and nothing on the platform, is it wobbly? Does the platform move
Answer:	Lift did come with a locking pin that will keep it from lowering once in place. Not sure I would store a bike for any extended period, but I did have a 350 lb dual sport on it for 2 days while having new tires installed, and did use the lock pin. Hope this helps.
Question:	How do I get the foot pedal receptacle to tilt down so the rod can be inserted? The opening is at an angle that can’t be reached from the side
Answer:	Do not know about your bike but it works great for my HD Ultra at 900 + LBS. However it is to tall to go under my bike with the saddles on it. Does not seem to be a problem without them.