11 best tall jack stands for trucks

Product description

The Torin Big Red steel jack stands for SUV's with extended height are a must have necessity in your garage. The 3 Ton (6,000 lb) capacity jacks are sold as a pair, help support your vehicle and are designed and dedicated to keeping you safe. The extra tall stands have a lifting range of 14" to 20-1/2" that allow for higher clearance lite duty vehicles such as jeeps, SUV's, and UTV's. Locking rack and pawl gives the security and stability where you need it the most. The large saddle surface area provides better contact with the load being supported and the single piece, self-locking, multi-position, forged iron ratchet bar provides precise adjustments. Constructed of high-grade steel with a welded frame, these stands are built for quality and durability. This unit is factory tested to meet ASME safety standards and includes a limited 1 year manufacturer warranty.

• Extended height, lightweight, steel jack stands; Sold in pairs
• Lift range of 14" to 20-1/2" allows for higher clearance lite duty vehicles such as jeeps, SUV's, and UTV's
• Saddle has a large surface area that provides better contact with the load being supported; Large foot base size of 8-9/16" by 7-3/16"
• Constructed of high-grade forged steel with a welded frame; Single piece, self-locking, multi-position, forged iron ratchet bar for precise adjustments
• Meets ASME Safety Standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Does each stand hold 3 tons or does it mean up to a 3 ton vehicle
Answer:	It spins in 360 degrees. I've used it several times and I'm quite happy with the results. This is the first polisher I've owned or used. It's very easy to learn to use via the instructions.
Question:	Can these 3 Ton SUV Jack Stands be used on a compact car
Answer:	No, it will not fit. Most auto parts stores, and department stores, auto section, has 10" pads
Question:	How high do they go
Answer:	Sorry, my buffer wheel measures 8 5/8 inches. They fit nicely on that but don't know about a 10 inch wheel.
Question:	What is the difference betwwen SUV (43006) and regaular (43002) 3 ton Jack stands
Answer:	Of course. I see their ad mentions another orbital buffer brand, but that's nonsense. A 10" orbital buffer by any other manufacturer is exactly that- a 10" orbital buffer !

Product features

Torin BIG RED T43006 Steel Jack Stands (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, 1 Pair

Product description

Used in pairs for supporting trucks, trailers, and equipment in fleet garages, agricultural, industrial and construction environments. Four leg steel base and support tube made of heavy schedule pipe for added strength and stability. Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy. Height adjustment pin is attached to stand to prevent loss. Large saddle with locating lugs support and position vehicle frame.

• Item may ship in more than one box and may arrive separately
• Four leg steel base
• Made of heavy schedule pipe for added strength and stability.Base Length:38.27 inch
• Quick and easy height adjustment
• Large saddle with locating lugs support
• V shaped saddle to cradle axles or other under truck components
• Max Height 46.5-Inch

User questions & answers

Question:	What pad or cushion do you suggest to get for the top of these
Answer:	Nothing noticeable.
Question:	Can I use raising a deck
Answer:	My Sony TV brought from the US could not display the PAL signals coming from a European set-top box (even though the set-top box had a setting that supposedly would cause it produce an NTSC signal). This device solved the problem. I would assume it would work for you too.
Question:	What are the Minimum and Maximum height range in inches
Answer:	Yes, you can just connect to one input.
Question:	Where are these made
Answer:	This video converter is dual voltage and designed to operate on any voltage between 100-240V.

Product features

Large Saddle with Locating Lugs

Supports and securely positions the vehicle frame.

Attached Pins

Height adjustment pins are attached to the frame to prevent loss.

Four Leg Steel Base

Made with heavy-duty pipe for added strength and durability.

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use

• Dimensions: 9.75"L x 9.75"W x 12.25"H. Patented design combines jack stand and bottle jack in one unit
• Safety bar locks unit at desired height. This jack is for trucks and off road type vehicles
• Portable jack designed to safely Lift and hold both Regular and unibody cars and trucks
• Highly durable. Wide steel base for stability under load. Height range is 11 inch to 21 inch, but its default lift range is 11 to 17.25 inch, it can be raised to 21 inch if adjusted manually
• Strong safety bar keeps jack from lowering once it has been raised to maximum height

User questions & answers

Question:	I lost the jack arm, how can i get a replacement
Answer:	I purchased the jack to jack up my utility trailer. Tractor Supply used to carry this jack, they no longer carry it., so I went on line & Found that Powerbuilt is the manufacturer.... Google them, & send them a note, about needing the jack arm.
Question:	How do you release the safety latch? Help
Answer:	Raise the jack, lift the latch while lowering the jack.
Question:	What is the exact measurement of this jack? For storage purpose
Answer:	I measured it in half light so do not bet the farm on the answer but it should be close. The base is 9"X9" and it is nearly 13" tall. That will get you close.
Question:	I see a lot of bad reviews on quality, does anyone know if they are better built now? Has there been a quality control or design improvement
Answer:	You must be working for a company that does not make or represent the Powerbuilt name. By your question about quality, you are going off of rumors and gossip.I have been in the very dangerous employment of glazing, sandblasting, industrial coating, waterproofing, painting, industrial and commercial building repair, and skyscraper window washing. Safety and quality of tools for myself and my crew is my first concern. I actually was a consultant for Landa Pressure Washers,and many Industrial Chemical Companies like Shermiin Williams and Miller Paint. Many things can go wrong when you'r 80 feet up on a crane at the shipyards,or sandblasting, testing , and coating a Bridge in Portland Oregon, or just fixing your truck or car. Powerbuilt tools, and especially this #640912 keeps me verysafe, better than a car jack alone or a jack stand alone. Look up what the Fire Departments and first responders use at your local Safety Equipment Supplier.Look up the Fisk Descender, a safety device made by my previous employer and inventor, Brian Fisk. We used this safety device to descend from buildings andCranes, and Holding Tanks at the Refineries. I pressure washed 8 to 10 story buildings hanging to prep them for coating or waterproofing or caulking. When I needthe safest support product I know to crawl under and work on a heavy machine or vehicle or industrial motor at Frito Lay or a support beam at Robinson Dairy, you'llsee this Powerbuilt 640912 keeping me safe. Now that I am retired from the Industrial world, I will continue to stand by and consult and train people with manyother Powerbuilt products.

Product features

Powerbuilt 3 Ton All-in-One Jackstand/Bottle Jack

The Powerbuilt 3 Ton All-in-One UniJack is designed to safely lift and hold both regular and unibody cars and trucks.

All Unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.

The Powerbuilt 3 Ton All-in-One solves this problem with an ingenious design that both safely lifts and securely holds a Unibody vehicle using a single lift point. The Unijack offers both concave and flat lifting surfaces to accommodate a wide variety of lift points.

What’s more, it eliminates the cost and hassle of a floor jack, it’s easier to lift, move and store and costs a lot less too.

The 6000 pound All-in-One offers lift range from 11 to 21 inches, which makes it perfect for trucks, SUVs and vans.

Product description

The Torin BIG RED T46002A steel double locking jack stands are a must have necessity in any garage. Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more. It's constructed of high-grade steel with a welded frame for quality and long term durability. Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity. Each stand is equipped with a removable locking support pin designed and dedicated to keeping you safe and increases safety by 200%. Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. The saddle has a large surface area that provides better contact with the load being supported. Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8". Meets ASME safety standards and includes a limited 1 year manufacturer warranty.

• Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
• Features a lifting range of 15-3/8" to 23-13/16" with a 6 ton (12,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
• Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
• Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
• Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	How much does a single jack hold? 3000 lbs? Or is it 3000 lbs per pair
Answer:	These jacks are rated for 3 tons for the pair, meaning evenly distributed across two jack stands (the pair). This means that the load placed on the PAIR should not exceed 3 tons. Using 4 stands to lift a 4 corners of a vehicle is not recommended and the pair should be used for both sides of the front or both sides of the rear, not to be used for lifting a single side of the vehicle at the front and rear point. Whether a single stand or a pair of stands, the rated capacity is a 3 ton, balanced and centered load. The regulations, at least as it relates to the US, are quite specific on this.
Question:	What are the min and max height for these please? What are the base outside dimensions please? Thanks
Answer:	Base dimensions = 6.5" x 7.25" Min height = 11.5" Max height = 16"
Question:	Anyone know the difference t43002 and t43002a? the former is $10 cheaper, but description identical to this one
Answer:	The difference is the locking pin. A number of jack stands, sold under various brand names, were recently recalled for being unsafe. If I am correct, the recalled models did not have the safety locking pin feature, found on this jack stand. After returning my recalled, unsafe, stands, I purchased these because they had the locking pin. I would suggest that one avoid any jack stand without the extra locking pin. The few extra dollars is well worth the added safety.
Question:	how high do they go
Answer:	Im not sure of the Max height but they go high enough to list a suburban and get wheels off. I just used them this weekend for brake job. I would do a search in google to find the max height, they also make some stands that are meant for SUVs which go higher. If you need to get a transmission out or something like that these wont go high enough.

Product features

Torin BIG RED Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair

Product description

This pair of ratchet-style jack stands offer easy adjustments between 15-1/2 to 23-1/2 inches. Rated with a 6-ton capacity, this set of lifting jacks will be ideal for any garage or vehicle maintenance bay. Made with a durable steel frame and wide base, these vehicle lifters provide secure stability under heavy loads. Ideal for cars and light duty trucks, these floor jacks let you work on your engine, breaks, transmission, or any vehicle part with ease.

• RATCHET STYLE: Simple lifting mechanism makes raising your vehicle off the ground super easy
• HEAVY DUTY CONSTRUCTION: Sturdy/durable steel frame and a wide base to provide strength and stability under load
• RATED CAPACITY: 6 tons (12,000 pounds); Great for cars and light duty trucks
• LIFT RANGE: 15-1/2 to 23-1/2 inches
• INCLUDES: 2 jack stands

User questions & answers

Question:	For the 3 ton jack: all the descriptions show it to be a 3 ton jack but the title says it's a "cooling system pressure tester kit
Answer:	The title is in error. I purchased the Wilmar W41022 3 ton jack stand which is what the description shows and is what the title should read. If you click "Add to cart" then go to the cart, then you will see the title is correct for the jack stands. That said I have been very satisfied with these stands. Recommend.
Question:	Is this 3 tons each stand = to total of 6 ton or is each stand 6 tons = to 12 total
Answer:	Just like it states, SIX TONS EACH=12 total (a ton is 2,000 pounds; 6 tons is 12,000 pounds).
Question:	What is the base dimension please? How wide is the base please? Thank you for your time
Answer:	Approx 8"
Question:	Where are these jacks manufactured
Answer:	The jack stands are made in China.

• Safely lifts and holds unibody and body-on-frame vehicles, 3 ton capacity
• Combines jack stand and Hydraulic bottle jack in one unit, eliminating need for separate jack stand
• Height range: 11 inch to 21 inch
• Designed to safely Lift and hold both Regular and unibody cars and trucks
• Highly durable
• Safely lifts and holds Unibody and body-on-frame vehicles
• Combines jack stand and hydraulic bottle jack in one unit, eliminating need for separate jack stand
• Safety bar locks the unit desired height

User questions & answers

Question:	Will this work on a 2012 Toyota corolla
Answer:	The 6000 will need 11.25 inches of clearance to get to the lifting point. I suspect your jeep wrangler Sahara has that, but best to measure to see if you have that clearance. BTW, the lifting height of the 6000 is 11.25 to 17.5 inches.
Question:	What is the stroke length of the bottle jack on the 4000 lb model
Answer:	It's very good, lt will work on 2016 hrv
Question:	Which jack should I get for my 2017 jeep wrangler Sahara the 4000 or the
Answer:	Yes, I've tried several different flavors of the ALO brand, and they all contain pieces of aloe pulp (same consistency across each flavor, they just absorb the flavor of the beverage). Compared to another less-expensive brands (Aldi, Dollar General), this contains more aloe (and tastes better in my opinion).
Question:	Will it work on 2016 honda hrv
Answer:	If I had to rate how much it would be 30% percent but a small delicious amount very smooth

Product features

Powerbuilt 6000 Lb. Unijack Bottle Jack & Jackstand in One

The Powerbuilt Unijack is designed to safely lift and hold both regular and unibody cars and trucks.

All Unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.

The Powerbuilt Unijack solves this problem with an ingenious design that both safely lifts and securely holds a Unibody vehicle using a single lift point. The Unijack offers both concave and flat lifting surfaces to accommodate a wide variety of lift points.

What’s more, Unijack eliminates the cost and hassle of a floor jack, it’s easier to lift, move and store and costs a lot less too.

The 6000 pound Unijack offers lift range from 11 to 21 inches, which makes it perfect for trucks, SUVs and vans.

Product description

Pro lift T-6903D is a 3-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 3 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Fit type: Universal Fit

User questions & answers

Question:	Where can I buy just the locking pin
Answer:	Max 16 1/2 min 11 inches
Question:	what is the extended maximum height
Answer:	It mounts to the Smittybilt Pivot hinge, so it will clear most aftermarket bumpers as long as they don’t have an integrated tire carrier.
Question:	Does it come with 2 or just one jack
Answer:	No
Question:	What are the max and min lift dimensions
Answer:	I use an insulator for the handle but the mount is very secure and makes little to no noise compared to my old one.

Product features

Pro-Lift Double Pin Jack Stands - 3 Ton

Features:

• Sturdy stamped steel construction
• High quality cast ductile iron ratchet bar
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm and shop use

Product description

Capacity: With a heavy duty 16" x 16" base, this pin-type truck jack has a 10 ton (20 000 lb.) weight capacity; A critical safety system to help secure load, the pin type post adjusts to 10 height positions from 28" to 47". Pin Type: The jacks have extra large 3.125" x 5.875" support saddles for use with unitized body vehicles, providing durability and longevity which makes it ideal for professional use. Certified: Ideal for automotive, fleet service, agricultural or construction equipment service centers; Sold individually, this product meets ANSI and PALD standards.

• Pin Type: The jacks have extra large 3.125" x 5.875" support saddles for use with unitized body vehicles, providing durability and longevity which makes it ideal for professional use
• Country of Origin : United States
• Package Dimensions: 17 L x 10 H x 17 W (inches)
• Package Weight : 54.0 pounds

User questions & answers

Question:	Where are they made
Answer:	The dimensions are: 10 X 16 X 4 inches. It comes with a tote bag. the color is white and the cover is removable. When compressed it is 4" X 10".
Question:	Is this one stand rated at 10000 or two stands
Answer:	it weighs about 1 lb to 1.2 lb. Sincerely, Visco Love US LLC.

Product description

The Torin AT43002AB steel double locking jack stands are a must have necessity in any garage. Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more. It's constructed of high-grade steel with a welded frame for quality and long term durability. Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity. Each stand is equipped with a removable locking support pin designed and dedicated to keeping you safe and increases safety by 200%. Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. The saddle has a large surface area that provides better contact with the load being supported. Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8". Meets ASME safety standards and includes a limited 1 year manufacturer warranty.

• Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
• Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
• Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
• Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
• Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Does this include 2 stands
Answer:	One set is 2 stands... I bought 2 sets because I needed four of them..

Product description

The Secret of Giving You Extra Safety to Work On Automotive

Omega 32225B Jack Stand is the 22 Ton pin style Jack Stand and was designed with the safety in mind. It uses the heavy duty pin for adjustable heights.

It gives you the ability to support from minimum height of 13-1/3 inch to maximum height of 19-2/3 inch.

Omega 32225B Jack Stands are built with the sturdy, welded steel construction. The heavy gauge, steel frame really gives you the additional strength to prevent from twisting.

With the large saddle, Omega 32225B jack stands give you the ability to securely support the load.

- Heavy Duty Holding Pins for Adjustable Heights

- Large Saddle Securely Supports the Load

- Sturdy Welded Steel Construction

- Heavy Gauge Steel Frame Help Prevent Twisting

Specifications

- Capacity: 22 Ton

- Min Height: 13-1/3 inch; Max Height: 19-2/3 inch;

- Saddle Size: 3-1/7 x 2-3/4 inch

- Base Size: 9-5/6 x 9-5/6 Inch

- GW: 63 Lbs

Omega 32225B Pin Style Jack Stand is backed by the full one year warranty from the date of the purchase.

• Heavy duty holding pins for adjustable heights
• Large saddle securely supports load
• Sturdy welded steel construction
• Heavy gauge steel frame helps prevent twisting
• Height range of 13-1/3 inches to 19-2/3 inches

User questions & answers

Question:	Can these stands hold up a 10,000 trailer during the off season. Trying to save on tire wear
Answer:	I believe so. The 22 Ton Capacity (note that you would need to verify this information for yourself) means that between the two jack stands it can evenly support 22 tons from one weight source, which is to say that each jack stand can support up to 11 tons or 22,000 lbs per jack stand. So the two jack stands together can have a single weight source bearing down on both of the jack stands simultaneously of no more than 44,000 lbs.
Question:	Sold as a set
Answer:	Hard to say at that price, but a pair are shown. I know that ours are a pair: ATC_OME32225
Question:	Is the saddle welded onto the top of the jack stand or is it one whole complete piece of metal
Answer:	They are not welded. It appears to be a single cast piece.
Question:	where are these made
Answer:	china...i think. they seem strong. i have had half of a 34,000 piece of ag equipment resting on them.

Product features

Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity

• Sturdy, welded steel construction for superior safety and strength
• Heavy gauge, steel frame helps prevent distortion or twisting
• Capacity: 22 Ton
• Base Size: 9 3/4" x 9 3/4"
• Min Height: 12 1/4"
• Max Height: 19 7/8"