13 best sunex tools jack stands

Product description

Used in pairs for supporting trucks, trailers, and equipment in fleet garages, agricultural, industrial and construction environments. Four leg steel base and support tube made of heavy schedule pipe for added strength and stability. Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy. Height adjustment pin is attached to stand to prevent loss. Large saddle with locating lugs support and position vehicle frame.

• Four leg steel base
• Made of heavy schedule pipe for added strength and stability
• Quick and easy height adjustment
• Large saddle with locating lugs support
• V shaped saddle to cradle axles or other under truck components

User questions & answers

Question:	What pad or cushion do you suggest to get for the top of these
Answer:	at least 4’
Question:	Can I use raising a deck
Answer:	This product is designed to be bolted on to the camper with lag bolts you supply. It comes with hardware to have arms swing up and attach to camper when traveling. The stands will need to be stored. Once product is attached to camper it stays on camper, even when traveling.
Question:	What are the Minimum and Maximum height range in inches
Answer:	no you do not attach these Jack's to your camper. And everything that you need is included
Question:	Where are these made
Answer:	I would think so. You should be able to position them to the front and rear of the wheels. I had the platforms (I don't know what they're called... but the piece that the camper sits on redrilled.) These platforms are "L" shaped brackets with a short side and a long side. The camper is intended for the longer side, but I flipped mine and had the short side drilled by a machinist so that my camper rests on the short arm. It did not compromise the strength at all. The long arm was too long and cut up my paint in a few places. it was a simple solution and I am very happy with these stands.

Product description

This pair of 3 ton aluminum jack stands feature six locking positions that allow secure loads in multiple heights. Item features a heavy duty flanged base and weighs less than 10 lbs. Backed by a 1 year warranty.

• 6 locking positions allow secure load in multiple height
• Heavy-duty flanged base safely secures load
• Ultra-lightweight under 10 pounds
• All backed by 1 year warranty

User questions & answers

Question:	is there a rubber pad for pinch weld seams to use on top of this set
Answer:	No.
Question:	How many jacks stands are included in this price
Answer:	It comes with one remote
Question:	What is the adjustment range on these
Answer:	All I can say is this kit will convert non convertible jacks and convertible. Maybe the other just does convertible jacks.
Question:	what is the base made of? Do you feel like you need a jack-pad for use thin pinch-weld
Answer:	Everything is included, it is a complete kit and comes in 2 boxes.

Product description

Sunex's 3-ton aluminum jack with 2 3-ton aluminum jack stands provides you with solutions that fit almost any application. Its features include a low profile, quick-lift technology, lightweight aluminum body, and rapid rise technology that reaches max height in only 7 pumps.

• Lightweight aluminum body nearly half the weight of steel jacks
• Rapid rise technology reaches max height in only 7 pumps without load
• Includes pair of 3 ton aluminum jack stands
• Low profile

User questions & answers

Question:	Could this be stored outdoors since it’s aluminum
Answer:	Short press MFB on side for play/pause or to answer or end phone call
Question:	How high does this go
Answer:	Yes they are
Question:	What does the hydralic jack alone weigh
Answer:	Hi, Thanks for your time on us. Sure friend, you can easily skip to next track or back to previous song through the multifunction button. Next track： Quick Double-Click on R earbud Volume +： Quick Triple-Click on R earbud Previous Song：Quick Double-Click on L earbud Volume - ：Quick Triple-Click on L earbud Hope this will help you a lot. If any other problem, pls contact via [email protected], we are glad to serve at you. Best regards, Vislla Team
Question:	Does it come with a case or is a case available? If not, not buying since it needs to be portable and stowable for me
Answer:	You can use just one. I do it all the time.

Product features

Vehicle Protection

Designed with a rubber saddle and a foam handle bumper.

Easy Jack Storage

Handle can be seperated into two pieces for easier storage.

Rapid Rise Technology

Dual pump pistons quickly raise the floor jack saddle to load.

Product description

The Sunex 6603LP Service Jack is bundled with a pair of Sunex 1003 3-Ton Jack Stands making it an ideal addition to your shop! Sunex 6603LP 3 Ton Low Rider Service Jack With it's ultra-low height at 2. 75" this 3-ton service jack is ideal for sports cars, exotic cars and vehicles with flat tires. It has a low profile height but features a high height of 20". Constructed with an upgraded uni-weld power unit and high performance seals and oil for long life. Featuring Rapid Rise Technology (TM) with dual pump pistons this jack reaches max height quickly and the wide front wheels and ball bearing mounted rear swivel casters provide superior maneuverability. This versatile unit provides the lowest low height and highest high height compared to the average jack due to its true low profile frame that provides access under low ground clearance vehicles. The floor jack is designed with a rubber saddle and foam handle bumper for all around vehicle protection. Sunex 1003 3 Ton Jack Stand (Pair) This pair of 3 ton jack stands is a perfect complement for the 3 Ton Low Rider Service Jack. Featuring a 4-legged steel base with pads for stability and a ductile iron support column with ratchet teeth for multiple height positions. Its self-locking handle and pawl secure the column in place and the large saddles with locating lugs provide confident support. The 6 ton saddle includes a recess for acceptance of a vehicle panel rail.

• Ultra-low height at 2. 75" ideal for sports cars, exotic cars and vehicles with fat tires. Features a high height of 20 IN.
• constructed power unit includes high performance seals and oil for long life
• Tools 3 Ton Capacity Ratcheting Jack Stands
• The 6 ton saddle includes a recess for acceptance of a vehicle panel rail

Product description

The Sunex aluminum service jack with quick lifting system's contains rapid rise technology, which improves raise speed by reaching max height in just 5 pumps. Its side mounted handles provide quick and easy positioning and maneuveringwhile the rear mounted ball bearing swivel casters and wide track front wheels offer quick transport and positioning. Its thick frame side plates and reinforced lift arm provide added strength, chassis torsion control and durability, and overload and bypass safety valves prevent ram over extensions and use beyond the rated weight capacity.

• 1 YEAR WITH SUNEXPRESS: Get in the express lane with the industry’s leading program and exchange warranted products directly with Sunex.
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• RAPID RISE TECHNOLOGY: Dual pump pistons quickly raise the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	Can you remove the saddle and add a transmission adapter? If so, what size is it
Answer:	Depende on the jack. Pump hydrolic or, screw
Question:	What's the minimum lift height
Answer:	Never saw an atwood jack myself.
Question:	is this item made in AMERICA
Answer:	There is no pin. The crank and jack will seat together.
Question:	Is this the same jack at the jegs 80006 aluminum floor jack and a couple others that look the same? why does this one cost more
Answer:	Yes, same as drill adapter.

Product features

Vehicle Protection

Designed with a rubber saddle and a foam handle bumper.

Easy Jack Storage

Handle can be separated into two pieces for easier jack storage.

Rapid Rise Technology

Dual pump pistons quickly raise the floor jack saddle to the load.

Product description

NOS NSJ0302 3-ton aluminum service Jack Pro style

• Lift capacity: 3 Tons (6,000-Pound)
• Height range: 3.75 in to 19 in
• Ultra lightweight aluminum construction at just 58-Pound
• Safety valve prevents overloading
• 2 Piece handle with bumper pad

User questions & answers

Question:	How many strokes does it take this 3 ton jack to hit it's max height
Answer:	China
Question:	What is the warranty and where is made, thanks
Answer:	Thank you for your interest in MET-Rx NOS Pumped! The amount of Citrulline Malate in our Extreme Nitric Oxide Synthesis Pumped Complex is proprietary. The ingredients in our proprietary blends are listed in order of predominance and help us deliver unique products at the best value to our customers.
Question:	what are the wheels made of
Answer:	When I received this product it was only one bottle. I was disappointed because I thought it would be 12.
Question:	Where is this jack made
Answer:	Thank you for your interest in MET-Rx! We recommend not exceeding one (1) bottle per workout sessions or more often than every four hours. Limit use to no more than two (2) bottles in a 24 hours period.

Product description

OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity, high profile jack stand has the strength and stability needed for big jobs. Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces. Round tube center post features 9 height adjustment settings. High strength steel locking pin is attached to the stand with a chain so it can't go missing. 33-3/4 to 44-1/4 inch height range. OTC recommends using in pairs. Sold individually. Backed by OTC's Lifetime Marathon Warranty. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity, high profile jack stand has the strength and stability needed for big jobs
• Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces
• Round tube center post features 9 height adjustment settings; high strength steel locking pin is attached to the stand with a chain so it can't go missing
• 33-3/4 to 44-1/4 inch height range
• OTC recommends using in pairs; sold individually; backed by OTC's Lifetime Marathon Warranty

User questions & answers

Question:	Is this sold in pairs or just one
Answer:	The picture matches what I received.

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

• [HEAVY DUTY]- Heavy duty steel frame provides stability and reliability when in use
• [LARGE BASE]- With a 10" x 10" base dimension you can rest easy there won't be any movement of the jack while in use under your vehicle
• [LIFTING RANGE] - Minimum Height: 13-3/10" (338mm) & Maximum Height: 19-7/10" (500mm)
• [HOLDING PINS] - Heavy duty holding pins for adjustable heights
• [WARRANTY] - Covered by a 2 years warranty that covers materials and workmanship

User questions & answers

Question:	What is the minimum height of stand without extension
Answer:	read ad 13" min i dont know why u would use with out extent. 10 1/2 inch just the base
Question:	How tall are these without the pin and at the first setting
Answer:	11.5” in the middle and 11.75” higher edges of the v shape
Question:	How many pin holes, and what is the distance between the pin holes
Answer:	4 pin holes about an 1 and 1/4 inch
Question:	Are these 22 ton each or 22 ton a pair
Answer:	Each jack stand is rated for 22 tons.

Product features

Dimensions

• 10" X 10" Base providing a large base to ensure stability and ease of use
• Heavy duty steel frame provides that piece of mind and reliability in any situation

Piece of Mind

• Work with a HIGH level of confidence knowing this heavy duty steel stand will hold.
• Robust but easy to move
• Makes other jack stands seem like toothpicks ready to break

Versatile

• Can be used for cars, trucks and even large heavier trailers
• Great for agriculture, industrial and construction environments
• Could support equipment in fleet garage

Adjustable Height Positions

• 13 3/10" to 19 7/10" Height Adjustments for any level of use
• Heavy Duty Holding Pins ensure safety when height adjusted upward

Product description

The Torin BIG RED T43004 lightweight jack stands are a must have necessity in any garage. Ideal for supporting vehicles after lifting with a jack, handling a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more. These jack stands are constructed of high-grade aluminum and feature an adjustable height range from 10-3/4" to 15-5/8" with a 3 ton (6,000 lb) load capacity. Equipped with removable locking support pins which gives you security and stability and is equipped with 6 locking positions. The saddle has a large surface area that provides better contact with the load being supported. A wide foot base provides additional steadiness, which is also removable, allowing for compact storage when not in use. Meets ASME safety standards and includes a limited 1 year manufacturer warranty.

• Lightweight jack stands for supporting vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, jeeps, ATV's, UTV's, and more
• Constructed of high-grade aluminum; Removable locking support pins provide added security and stability and is equipped with 6 locking positions
• Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
• Wide foot base provides additional steadiness; Base is removable, allowing for compact storage when not in use
• Meets ASME safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Will this hold my 4000lb Lexus for changing rims? Plan on using 1 jack stand
Answer:	The jacks are sold in pairs. The manufacturer most likely intended the jacks to be used as a pair. Other than supporting the vehicle for a minute or two with one jack, while raising the opposite side to place the other jack safely.... I would side with caution and say that BOTH/COMBINED jacks can support 3 tons (6,000 pounds). Don't forget to use your parking brake and chock both wheels that remain on the ground. Stay SAFE!!
Question:	I have a 2016 z06, I intend to put it on stands for the winter. I have pads to put between the hard points and the stands. Will these stands work
Answer:	Yes
Question:	Are these much a much better design compared to the 4 leg cheaper jack stands
Answer:	China
Question:	ton for each stand or is it the combined capacity of the pair
Answer:	PAIRS

Product features

Torin BIG RED Aluminum Jack Stands with Locking Support Pins: 3 Ton (6,000 lb) Capacity, Red/Silver, 1 Pair

Product description

The OEMTOOLS 24848 1, 500 lb. High reach jack stand provides added support during the positioning and installation or removal of vehicle components. While unable to fully support or stabilize a vehicle, this high reach stand is designed for use with a vehicle properly positioned on an automotive lift.

• Min height: 55"
• Max height: 78"
• Compact design for use in limited workspaces
• Durable heavy gauge Steel Construction

User questions & answers

Question:	Does the handle have a grease fitting to lubricate the acme thread
Answer:	The Max duty cycle of solenoid is 10 second. And it is not rated for continuous duty.
Question:	Are these bright green as shown
Answer:	Sb connector is a smaller size and uses smaller gauge wire i think 10 gauge max size for terminals. Hope this helps.

Product description

The Secret of Giving You Extra Safety to Work On Automotive

Omega 32107B Jack Stand is the 10 Ton pin style Jack Stand and was designed with the safety in mind. It uses the heavy duty pin for adjustable heights.

It gives you the ability to support from minimum height of 28 inch to maximum height of 47 inch.

Omega 32107B Jack Stands are built with the sturdy, welded steel construction. The heavy gauge, steel frame really gives you the additional strength to prevent from twisting.

With the large saddle, Omega 32107B jack stands give you the ability to securely support the load.

- Heavy Duty Holding Pins for Adjustable Heights

- Large Saddle Securely Supports the Load

- Sturdy Welded Steel Construction

- Heavy Gauge Steel Frame Help Prevent Twisting

Specifications

- Capacity: 10 Ton

- Min Height: 28 inch; Max Height: 47 inch;

- Saddle Size: 3-3/8 x 5 inch

- Base Size: 16 x 16 Inch

- GW: 120 Lbs

Omega 32107B Pin Style Jack Stand is backed by the full one year warranty from the date of the purchase.

• High maximum height of 47 inches
• Heavy duty holding pins for adjustable heights
• Large saddle securely supports load
• Sturdy welded steel construction
• Heavy gauge steel frame helps prevent twisting

User questions & answers

Question:	is this 2 stands or
Answer:	This connecter is designed for higher amperage connections, not watertightness. If they are located in a place where they stay dry, I think they would be fine, especially if you packed them up with some silicon dielectric grease. I use these on my motorcycle battery. They stay dry in that application.
Question:	Is this for one or two stands
Answer:	if your using 1 gauge cable then yes....these fit 1 gauge and larger 0 gauge
Question:	are there 1 or 2 stands included
Answer:	I used it for 1 ga wire and it still had a little room.
Question:	Are these sold as a pair or single
Answer:	I have been mixing the two together with no problems. The only difference is the name embossed on them.

Product description

Use for removal, installation and transporting of transmissions and transfer cases on vehicles that are supported by lifts. Foot activated pump pedal for hands free raising of the rams. Lowered telepscopic rams enable the transmission to be transferred from the jack to the work table and extended to reach a miximum height of 74. Foot activated release pedal provides slow controlled lowering of load. Universal saddle with four ratcheting arms quickly adjust to the transmission pan configuration.

• Foot activated pump pedal for hands free raising of the rams
• Extended to reach a maximum height of 74 inches
• Lowered telescopic rams enable the transmission to be transferred from the jack to the work table
• Nylon strap tie down secures the load to the saddle
• Overload valve prevents jack from being used beyond its rated capacity

User questions & answers

Question:	Who in my 91710 or nearby can do a warranty repair
Answer:	you should just throw it out.... mine lasted 4 weeks and leaks like crazy.... its total junk
Question:	Does foot pedal also work lowering the unit
Answer:	Foot activated release pedal provides slow controlled lowering of load.
Question:	what is the warranty? is it made in China
Answer:	The product is made in China, as for the warrenty I dont know, I have been using these jacks for the last 25 years,in my ten bay shop where we pull and install two to three transmissions a day as well as two to three fuel pump tank combos a week. We also use these jacks in our salvage yard operation where we pull three transmissions a day. I have four of these and they last a average of about two years before the seal starts to leak at the ram. The american made models worked no better and costed twice as much. I can afford to throw them away every two years compared to the overpriced american models.For the money these cant be beat.
Question:	WHAT IS THE WARRANTY TRANS JACK SUNEX 7793B
Answer:	Taken from the website: Sunex® Lifting Equipment carry a One Year Warranty. During this warranty period, Sunex Tools® will replace any unit which proves to be defective in material or workmanship. All floor jacks 3.5 ton in capacity and under will be replaced under the SUNEXpress™ Warranty.

Product features

Sunex Tools 1/2 Ton Telescopic Transmission Jack (7793B)

At Sunex Tools, we keep the user experience at the forefront of product design and development. When it comes to heavy duty repairs, leave the heavy lifting to Sunex.

Quality

Sunex lifting equipment endures rigorous ASME PALD compliance testing, ensuring high performance tools that last. All Sunex jacks are backed by our 1 year warranty.

Heritage

Since 1977, we at Sunex Tools have prided ourselves on being experts in the automotive repair industry.

Chain Tie Downs

Chain tie downs safely secures transmission to the saddle while a handle helps with positioning and moving the jack.

Oversized Foot Pedal

Foot activated pump pedal allows hands free raising of the transmission while foot activated release pedal allows hands free lowering

Swivel Casters

Wide base legs with swivel caster, polyurethane tread wheels provide stability and easy maneuverability even under load. Includes two locking caster wheels.

Product description

Designed for heavy duty truck and trailer shop use, rail and bus work, and portable for roadside service calls. Narrow chassis design fits easlity between tandem wheels. Chassis base is contoured so wheels make contact with ground when jack is not under load and raises them off the ground when under load to prevent damage. Wiper seals protect hydraulic system from contaminants. Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and ram over extension.

• Narrow chassis design
• Wiper seals protect hydraulic system from contaminants
• Overload and bypass safety valves
• Self-retracting ram
• Integrated filter protects air motor

Product features

Sunex 6622 22 Ton Air/Hydraulic Truck Jack

At Sunex Tools, we keep the user experience at the forefront of product design and development. When it comes to heavy duty repairs, leave the heavy lifting to Sunex.

Quality

Sunex lifting equipment endures rigorous ASME PALD compliance testing, ensuring high performance tools that last. All Sunex jacks are backed by our 1 year warranty.

Heritage

Since 1977, we at Sunex Tools have prided ourselves on being experts in the automotive repair industry.

Multiple Adapters

Three adapters are included to provide multiple max heights for any job.

Easy to use Controls

The controls, located at the top of the handle, lift and lower the ram with one easy turn.

Heavy-Duty Wheels

The large 8 inch tires roll easily over gravel, air hoses or whatever is in your way.