12 best ev onboard chargers

Product description

The Delta-Q QuiQ charger is an advanced, high frequency charger that is small and light enough to be installed on-board the vehicle. The charger is completely sealed, is passively cooled without the use of fans, and can withstand temperature extremes, moisture and high vibration. The QuiQ charger is programmed with 10 charge profiles for both wet and sealed batteries. It can be used worldwide as it operates at both 120 volts and 230 volts. These are commonly used on golf cars, electric vehicles, floor scrubbers, and battery powered sweepers. Stores up to 10 user-­selectable charge algorithms.



Dimensions: 11" x 9.7" x 4.3", Weight: 11 lbs. One Year Warranty.



IMPORTANT - Battery Types: This charger comes pre-programmed to work with 10 different battery models. If your battery is not in the list below tell us your battery model when you purchase (before shipping), and we will program the charger for it at no cost.:



Trojan XHS

Deka 8G31

US Battery US125

US Battery 8V-GC

US Battery 305HC

US Battery L16HC

Fullriver DC-180-8

Fullriver 12 volts

Fullriver DC335/400-6

Fullriver DC224/250-6



*These are not recommend for Lithium batteries and we do not support or program for Lithium.

• Free Programing For Your Battery Type (Contact Us At Purchase)
• 36 Volts, 21 Amps
• Input Voltage 120 VAC / 230 VAC at 45-65 Hz
• For Lead acid (Wet/AGM/GEL)*
• 8 Inch AC inlet plug, 6 Foot DC 12AWG/4C output cable

User questions & answers

Question:	Buenas tardes, es posible programarlo para usarlo con baterias trojan sagm
Answer:	I am not sure “prueba”. It works perfectly fine in rain and snow.

Product description

The Delta-Q QuiQ charger is an advanced, high frequency charger that is small and light enough to be installed on-board the vehicle. The charger is completely sealed, is passively cooled without the use of fans, and can withstand temperature extremes, moisture and high vibration. The QuiQ charger is programmed with 10 charge profiles for both wet and sealed batteries. It can be used worldwide as it operates at both 120 volts and 230 volts. These are commonly used on golf cars, electric vehicles, floor scrubbers, and battery powered sweepers. Stores up to 10 user-­selectable charge algorithms.



Dimensions: 11" x 9.7" x 4.3", Weight: 11 lbs. One Year Warranty.



This model has a Remote LED and label with an 11 foot cord for mounting in your dash/gauge area.



IMPORTANT - Battery Types: This charger comes pre-programmed to work with 10 different battery models. If your battery is not in the list below tell us your battery model when you purchase (before shipping), and we will program the charger for it at no cost.:



Trojan XHS

Deka 8G31

US Battery US125

US Battery 8V-GC

US Battery 305HC

US Battery L16HC

Fullriver DC-180-8

Fullriver 12 volts

Fullriver DC335/400-6

Fullriver DC224/250-6



*These are not recommend for Lithium batteries and we do not support or program for Lithium.

• Free Programing For Your Battery Type (Contact Us At Purchase)
• 48 Volts, 18 Amps
• Input Voltage 120 VAC / 230 VAC at 45-65 Hz
• For Lead acid (Wet/AGM/GEL)*
• 8 Inch AC inlet plug, 6 Foot DC 12AWG/4C output cable

User questions & answers

Question:	Should I leave charger plugged into the wall socket when not in use
Answer:	Hello There, Chevy BOLT has 60kWh Battery; you are absolutely correct with original factory stocked charger it charges at 4miles/Hour rate (it takes 58 Hours to charge an empty battery). With our Primecomtech 16Amp Charger, it charges at 14miles/Hour rate, another word if the battery is completely empty it takes 16hours to fully charge your 234miles range 60Kwatt battery. But, if you need faster charger speeds luckily your car Chevy Bolt supports 32Amp charging rate if you buy Primecomtech 32Amp Charger (listed on Amazon ==> https://www.amazon.com/gp/product/B07FV7YLPR ) it will charge at 28Miles/Hour rate another word even you completely empty the battery it will fully charge it at 8hours (instead of 58Hours with stoked charger). Right now we are having them on sale plus you can take advantage of $50 additional coupon instantly on the 32Amp Charger. You can get the coupon right here at Amazon site https://www.amazon.com/gp/product/B07FV7YLPR Thanks Regards, David Eygoren Primecomtech
Question:	I have one that is disconnected :( where does the green wire (spade connector) go ??? thanks
Answer:	Hello Francisco, Yes, we have 32 amp charger this is the link for it: https://www.amazon.com/gp/product/B07NQ71P2S Thanks David
Question:	Want to purchase programmer for DeltaQ
Answer:	Hello David, Our charger is 100% compatible with 2016 Volvo XC90 EV. We do not have israeli wall plug but we can give you either European (German Schuko plug ) or we can give you hard wire type and you can buy a plug from local electric shop and have it connect to to the 3 wires.) Thanks Regards, David

• SAFE CHARGING WITH NEMA6-50 PLUG: Our product all made with UL approved components which the UL number was E364477. The EV charging stations need no assembly - just plug in to your existing NEMA6-50 receptacle, and then plug it in.
• VERSATILE VEHICLE COMPATABILITY: The plugs are compatible with all major EV automakers and multiple power sources: a Dryer, RV-type or regular wall outlet with adapters.
• 3.86 KW/H FASTER CHARGING SPEEDS: With level 2 charging, most electric vehicles will charge up to 11 miles per hour. Our level 2 EVSE features 240V, 16 Amp charging and up to 3x faster with a 220 volt outlet than your car's original charger which means you can spend more time heading out for fun and adventure and spend less time waiting around.
• MULTIPLE PROTECTION: The EVSE providing lightning-proof, leakage, overvoltage, overheat, IP55 rating waterproof, UL94V-0 rating flame resistance and overcurrent protection for your safety, and features control box with LED charge status indicators
• PROFESSIONAL AFTER -SALES: Local customer service team to offer life-time hassle-free technical support, and 1-year warranty. If anything is not to your complete satisfaction, simply reach out to us and we will make it right!

User questions & answers

Question:	How can i know i can using nema 6-50 on my 2017 chevy volt at home
Answer:	I was unable to quickly confirm the units are built using a 50 Hz cycle. Most likely they are and if this is true, it will not present an obstacle. The charger should work in Europe. You may have to build a little plug converter for it.
Question:	It’s water proof
Answer:	yes. all disney infinity characters are interchangeable among the different platforms.
Question:	A prueba de agua
Answer:	Yes, my grandson says she turns invisable.
Question:	Can I use this 240V charger in Europe
Answer:	I believe with 95% confidence that it was in the US packaging, as I don't see the red sticking out in my memory. It's been a while, which makes it difficult to be certain, but red is something that would stick out. So...yeah, US I think, if those are the two options. Hope this helps. Sorry if not...

Product features

Customer Survey Who Have Bought Megear EV Charger

This 16 amp 240v charger cable is perfect and preferable to higher amperage charging cables. Your lithium ion battery will last longer over it’s lifetime trickle charging at 120v overnight. This 16 amp “faster” charger is your next choice and will charge your battery in half the time without shortening the life of your battery. Higher amp charging can shorten the life of you battery by as much as 10% of the expected life of the battery. Never charge immediately after driving...let the battery cool off...then charge. Heat is the enemy of a lithium ion battery. This cable works perfect right out of the box with my Honda Clarity.

Customer Survey Who Have Bought ZENCAR EV Charger

This works fine with my BMW I3, and we now get a full charge in about 5-6 hours as opposed to the previous 18-20 the factory charger took. Well worth the money of admission. Also, this plug Neme 10-50 could plug into my dryer outlet so I don’t have to install new outlet for 240volts outlet in my house that it saves my money for installation for new outlet. Economic choice!

Customer Survey Who Have Bought ZENCAR EV Charger

Purchased as replacement for my Ford C-Max Energi after accidentally damaging original cord. Actually like this better than what came with the vehicle. The cable has a heavier gauge extension cord, so it does not kink like the original one did. I'm very pleased with the item and ended up saving almost 450 dollars over what Ford wanted for a replacement cord. It works, saved money, and I feel is nicer than original, so in every way I am pleased with this purchase!

Customer Survey Who Have Bought ZENCAR EV Charger

We bought the NEMA6-20 plug with level 1 adapter unit. The product was shipped well and arrived as scheduled. A couple of key things we like over the factory supplied charger: The wall hook to easily wrap the cord around and the "gun" holder you stick the charger into while it is not charging in the car. It's light weight and smaller than our original charger. It is nice to be able to easily adapt to the charging outlets available. We charged on 110 until we bought the 220 outlet and it was a simple switch for us. That option was available on the factory charger. We are happy so far!

1.Check Your Socket Circuit Breaker or GFCI Socket

• Our EV Charger working current is 16A. Please check your breaker whether more than 16A. (18A, 20A, 30A .... is also OK)
• The good choice is the 18A or 20A circuit breaker. Otherwise, it will trip your breaker if the breaker max Amp is lower than 16A.

2.Check Your Socket Type Whether NEMA 6-50 And Check the Wire Gauge Of Socket

• The NEMA 6-50 plug can fit with NEMA 6-50 socket.
• The way to check socket type is according to words was lettered in outlet or you can compare the outlet with our cartoon.
• DON’T use this charger if your socket wired with 16/3C or 18/3C cable.

3.Warning! Fully plug into your socket when using

• When using electric products, you need to fully plug into the socket so that metal plug fork can completely connect the socket.
• If not, it may burn out socket due to the bad connection.

Product description

Compatible with all Electric Vehicles; i.e: Plug-in Hybrid. and many more brands. Works with all brand EV Cars and PHEV plug-in hybrid Vehicles. Primecom Smart Chargers communicate with your EVs computer via J1772 Serial Data Connection. Your EVs computer calculates the appropriate current and voltage depending on variables such as existing charge and ambient temperature, etc. The Primecom Level 2, 32A EV charging station then releases the right amount of current that was decided by the EV computer. This feature keeps your battery healthy while giving the most driving range. Primecom Level 2, 16A EV charging stations fit your daily needs. Our chargers come with 30, 35,40, and 50 feet cords, allowing you to use it with convenience. You don't have a closed parking space? No worries. Primecom Smart chargers are waterproof and are safe to use outdoors. Most states offer off-peak electrical rate incentives to EV owners. Our chargers fast-charging capabilities allow you to fully benefit from this incentive. By being able to fully charge your EV in less time, you can charge your EV in off-peak hours and save money🔋 If you need 40 or 50-feet 32/40Amp charger please see www.amazon.com/dp/B07SHK5NXS or just type B07SHK5NXS in to Amazon search window

• 🔋 If you need 40 or 50-feet 32/40Amp charger please see www.amazon.com/dp/B07SHK5NXS . 3X -4X FASTER CHARGING — PRIMECOM Level 2 chargers function at 16 Amps working within a range of 100V - 240V. Thus providing 3 to4 Times Faster than your manufacturer provided Level 1 110v charger! Works with all brand EVs & PHEVs & Plug-in Hybrid Vehicles. The 16 Amp model charges at 3.84kw/hour giving 12 miles of range per hour! ☔️— Primecom Smart chargers are waterproof and are safe to use outdoors
• 📱 INTELLIGENT CHIP — PRIMECOMTECH designs its own SMART chargers electronic circuitry-intelligent Chip & software here in the USA, unlike other chargers which dump all the current at once. PRIMECOMTECH EV Chargers communicate with your EV via the data connection port to gather 6 different types of data such as, ambient and battery temperature, EV's current battery level, Battery Capacity, etc. to automatically adjust the voltage to get the most life expectancy from your battery.
• 🔌 PLUG AND PLAY — Connects to your Dryer Outlet! You can find additional adapters here : https://www.amazon.com/gp/product/B07Y724BY7 No need to run expensive wiring ! Use your 3 or 4 Prong 220/240-Volt Outlet at the Garage. Select the appropriate NEMA outlet type that you have at your home from above. 10-30, 10-50, 14-30, 14-50, 6-20, 6-30, 6-50, L14-30, L6-30, or European 🚙 UNIVERSAL COMPATIBILITY! Works with all brand EV Cars.
• 🛡 SAFE AND SECURE — Primecom Level 2 Chargers have passed multi point rigorous tests to ensure quality and safety measures. TÜV German Equipment and Product Safety Certification, CE️ certifications, UL️ Listed Cable Certifications, along with 12 other built in safety features such as, lightning-proof, leakage protection, overvoltage, overheat, overcurrent protection, UL94V-0 rating flame resistance, IP55 rating waterproof. 💡 Also featuring a control box with LED charge status indicators.

User questions & answers

Question:	I have a 2018 chevy bolt, how many miles per hour will this charge the car? factory 110v cable is 4 miles per hour charge. thank you
Answer:	Yes, you may leave the charger plugged in. The charger does not place high voltage on the terminals until it senses it is connected to the car. You may want to consider purchasing a "EV charger plug nozzle holster dock" to mount on your wall, so the charge cord is always supported and out of harm's way when it is not connected to the car.
Question:	Do have a 32amp
Answer:	Yes
Question:	Will it connect to an israeli wall socket? i own a 2016 volvo xc
Answer:	NEMA 6-50 refers to the plug on the wall. So if you have that on your wall, then it should work. I believe the Chevy Volt uses (like most plug in vehicles except Tesla) use the J1772 connector.
Question:	is it safe to leave charger unit plugged in all the time even if not charging the vehicle
Answer:	we mounted ours outdoors and have not had any problems yet. as a precaution I sprayed the seams of the inline charger box with flex seal and zip tied it to a bracket. I also zip tied that plug holder so that water will not enter the electrical plug. hope that helps.

• CHARGES ALL EVs & PHEVs: Fully compatible with all Electric Vehicles and Plug-in Hybrid Electric Vehicles sold in the United States and Canada. Including: Chevy Bolt, Nissan Leaf, Ford Fusion, BMW i3, Chevy Volt, Toyota Prius, Tesla (with adapter).
• SUPER FAST CHARGING & EASY INSTALLATION: Charges up to 8x Faster than Standard AC Level 1 EV chargers for an additional estimated 25-35 miles of Range Per Hour. Engineered for ease of Installation with a Standard NEMA 6-50 plug and universal mounting bracket.
• SAFETY RATED & TESTED: Designed and tested to meet the nationally recognized UL (USA) & ETL (Canada) standards for safety. A must-have for electrical products installed in your home. NEMA 4 rated for Indoor/Outdoor use in all weather.
• ADJUSTABLE AMPERAGE & MODERN COMPACT DESIGN: Adjust the Max Current Output (32A, 24A, 16A) to Support Multiple Circuit Ratings (40A, 30A, 20A). Install in more locations with a slim, compact & modern design.
• EVERYTHING YOU NEED INCLUDED: One low price, no need to purchase other items. Includes: charging unit w/ 25 foot cable, NEMA 6-50 plug, universal mounting bracket, plug holster & user manual.

User questions & answers

Question:	the instruction manual says it requires a licensed electrician to install, that is only referring to the hardwire (not plugin) option yes
Answer:	That is correct. If you already have the available 240V NEMA 6-50 receptacle then you can simply mount and plug this unit in. For hardwired installation or to install a new NEMA 6-50 receptacle a licensed electrician is required.
Question:	Can this unit be used on a 2019 Volvo VC60 and the unit certified for outdoor mounting
Answer:	Yes - it uses the standard J1772 plug for all EVs in the North America. It is rated for outdoor use.
Question:	Is the warranty good for 3 or 2 years? EVoCharge web site says it's 2 years
Answer:	The EVoInnovate charging stations include a 3 year limited warranty. This is also reflected in the documentation sent with the product. Please do not hesitate to contact us with any other questions and thank you for your question regarding the EVoInnovate charging station! Thank you, -EVoCharge Customer Support
Question:	Is it hanging on a bracket or is the unit itself screwed to the wall
Answer:	The main unit attaches to the wall, then there is a bracket to hold the plug end for the car that you can position separately.

Product features

A Faster Choice in EV Charging

Streamline your electric vehicle charging at home with a safe, reliable and cost effective EV charger. See the many advantages to purchasing an EVOCHARGE Level 2 charging station:

Stay Fully Charged

Eliminate the "range anxiety" by installing a level 2 ev charger in your own home. EVOCHARGE provides an estimated 25-35 miles of range per hour of charging.

Safety Certified Products

It is important when purchasing electrical products for your home that they are fully tested & certified for safety. EVOCHARGE units are all UL and cUL listed for safe operation. UL File Number: E469990 (2/15/2018)

Works With All EV's

Utilizing the universal J1772 plug the EVOCHARGE electric vehicle chargers work with all EV & Plug-In Hybrid's in the United States & Canada. Including popular models like; Chevy Bolt, Nissan Leaf, Ford Fusion, BMW i3, Chevy Volt, Toyota Prius, Chevy Spark, Jaguar I-Pace and Audi e-tron. Even Tesla using its standard adapter.

Cable Management

Keep your garage or charging area clean and safe. Install one of our easy-to-manage EV charging cable solutions. Our EVOREEL and cable retractor allow you to eliminate tripping hazards and reduce the possibility of cable damage. These can be easily mounted on the ceiling or wall.

Product description

Charge Point Home Flex is our newest, fastest and most advanced Level 2 home charger, charging up to 50 amps and adding up to 37 miles of driving range per hour of charging. Flex can be installed to charge upto 50 amps, allowing drivers to pick the speed that's right for them and their home’s electrical supply. Charge Point Home Flex is a Wi-Fi-enabled charging station and offers smart charging features using the Charge Point app, including the ability to set a charging schedule, get reminders to plug in, see all of your charging history in one place, connect with Alexa, and more. Flex is UL Listed for electrical safety, ENERGY STAR certified for efficiency and comes with a 3-year and 24/7 customer support. Charge Point Home Flex can be installed by any electrician, indoor or outdoor, to charge at 16A to 50A, and comes with a 23-foot charging cable and either a NEMA 14-50 or 6-50 plug. Plug-in installation with a NEMA 6-50 or 14-50 outlet requires circuits/breakers rated 40A or 50A. For other circuit ratings, the plug is easily removed for hardwired installation. Flex can be installed outdoors using either a hardwired installation or a weatherproof NEMA receptacle.

• Level 2, 240 volt electric vehicle (EV) charging station charges any EV up to 9X faster than a normal wall outlet, with flexible amperage settings up to 50 amps (16A-50A) and plug-in or hardwired installation. Use the ChargePoint app to pick the right amperage for your home after installation.
• Works with all electric cars, tested on leading EV models: Chevrolet Volt and Bolt EV, Hyundai Kona and Ioniq, Kia NIRO, Nissan LEAF, Tesla models, Toyota Prius Prime, BMW i3, Honda Clarity, Chrysler Pacifica, Jaguar I-PACE, and many more
• Charge faster and smarter with the ChargePoint app. Set a schedule to only charge when electricity is cheapest, set reminders so you never forget to plug in, use Alexa voice control, and see all your ChargePoint charging data in one place
• Safe and reliable, with a 3-year backed by 24/7 customer support from a company dedicated to EV charging for 10+ years. UL listed for electrical safety, ENERGY STAR certified for efficiency.
• Easy for any electrician to install indoors or out. Plug-in installation with NEMA 6-50 or 14-50 outlet (6-50 currently selected) requires circuits rated 40A or 50A. For other circuit ratings, including 60A-80A for 48A-50A charging, the plug is easily removed for hardwired installation. Select the amperage that works best for you and your home, helping to avoid electrical upgrades.
• Widely eligible for utility rebates and other incentives, including the renewed U. S. federal tax credit for 30% of total station and installation cost, up to $1000.

User questions & answers

Question:	This charger is rated up to 50 amps. Is it auto sensing or it a manual switch? More to the point, what wire size is needed
Answer:	The charger can deliver up to 50 continuous amps, which would require a circuit wired for at least 60 amps (60 amp circuit can deliver 80% of rating, so 48 amps). 60 amp circuits at 80% require 6 gauge wire. You set the maximum capacity of the charger when you configure it on the ChargePoint amp. EVs only draw the amount they are capable of charging at - so 9.6 Kw for most EVs except Teslas (240 V times 40 amps) New Teslas can draw above 50 amps, so that is what the max setting on the app does - it limits the safe output to the circuit capacity. There is no manual switch on the charger, it is all set through the app.
Question:	Is it possible to extend the nema 14-50 plug cable length by swapping it like you would a dryer
Answer:	This is why you need to research electrical codes or use an electrician. The 12” requirement in NEC 625.22 mandates the 12” applies to the “personal protection system” location to the plug not to the cord length from plug to vehicle that requirement is a minimum of of 6’ and max of 15’. Just google NEC 625 page 4 section 625.17 for more details
Question:	Can it be set to charge to a certain percentage of charge? Like charge my battery to
Answer:	No. I set the charge limit to 70% in my vehicle (I can also do 80% or other value). Then I set the charge time (10pm-6am) in the ChargePoint app. An alternative is to have a short charge time (say 10-12pm). The charger does not know how much the vehicle is charged.
Question:	If the app experiences a problem or ChargePoint stops supporting it, what’s the default setting for amperage and is there a manual way to change it
Answer:	Hi there, Before you set up ChargePoint Home using the ChargePoint mobile app, the default amperage is set at 16A. However, once you select your preferred amperage during the set up process in the app, the chosen amperage (up to 50A) becomes your default going forward. There is no manual way to change the amperage if you have a problem, but Home will still charge at the level you chose during setup. Thanks for asking, Team ChargePoint

Product features

The Flexibility to Work with Any Home

A wall outlet just doesn't cut it. Add up to 37 miles of Range Per Hour to your EV with ChargePoint Home Flex, a flexible home charger that can deliver 50 amps of power. Pick the charger amperage and charging speed that’s right for you, your EV and your home.

Works with Any EV

ChargePoint Home Flex can charge any EV, including your next one. It uses a universal J1772 connector and has been tested with all top-selling models: Chevrolet Bolt EV, Chevy Volt, Hyundai Kona, Kia NIRO, Nissan LEAF, Tesla, Toyota Prius Prime and more.

Charge Smarter, Not Just Faster

Use the ChargePoint app to make owning an EV even easier. Pick your charging speed, schedule charging, get reminders to plug in, connect to Alexa and more.

Safe and Reliable for Your Home and Your EV

ChargePoint Home Flex is designed and tested to be safe, efficient and reliable. It’s UL listed for safety, NEMA 3R weatherproof rated, ENERGY STAR certified for efficiency* and backed by 24/7 customer support so you can protect your investment in your EV.

*UL certificate 20190607-E328478 issued 06/07/2019; Type 3R per UL 50E; ENERGY STAR qualified 06/25/19.

Install Once, Charge Whenever

No matter what you drive or how much space is available on your electrical panel, ChargePoint Home Flex fits right in. Have an electrician install it indoors or out, then set the appropriate charging speed in the app—up to 50 amps. Comes with a 23 ft charging cable and works with either a NEMA 6-50 or 14-50 plug (be sure to select your desired plug type before you buy). Remove plug for hardwired installation. We recommend NEMA 6-50 and 40-amp charging if you have space in your panel.

Count on ChargePoint Wherever You Go

EV charging is all we do, and we do it all—home, public and fast charging are super easy with a ChargePoint account. We’ve delivered more than 62.5 million charges to all kinds of cars at over 100,000 charging spots worldwide, and we’re always working to make EV charging even easier.

• ✔ Charging Speed Up to 3x faster: This level 2 ev charger could charge your vehicle 3x faster than the level 1 charger. Always get ready when you're about to drive. 25-feet cord is long enough to reach the driveway from the wall socket.
• ✔ Two Different Charging Options: This level 2 ev charger works at 240V/16A with a NEMA 6-20P (like the dryer/washer outlet), and with a free adapter it could be changed into 120V/16A charging with NEMA 5-15. Comes with a sturdy carry case for traveling or daily commuting portable use.
• ✔ Universal Connector: Works with any ev with standard J1772 connectors in North America. Tight plugging to avoid falling.
• ✔ Excellent Protection Performance: Indoor installation for longer life span. Secure your charger with lighting/leakage/overcurrent/overvoltage protections. LED light indicators is helpful to read the charging status and to be easily spotted in the dark.
• ✔ Realiable Assurance: CE Certification qualified and the SAE Standard J1772 is UL listed. BougeRV level 2 ev Charger carries 12-month no-hassle warranty, so if you have any questions, please feel free to reach out to us and we will get back to you promptly.

User questions & answers

Question:	It looks cheap and it is cheap why get this one instead of a juice box pro
Answer:	It doesn't have all the bells and whistles that come with a first rate level 2 EVSE or station. If you are a, "Plug it in when I get home, and unplug when I get ready to go, the "bells and whistles" That come with the more expensive units are just features you pay for but don't use. I use mine on a LEAF S, and my electric service costs the same day and night, no need for connectivity or scheduled charging. Well satisfied. $200 vs. $400 to $600, your choice.
Question:	A silly question, but is it OK to leave the charger plugged in into the wall outlet when the car is not being charged
Answer:	It is okay to leave the charger plugged in when not using it. The only thing it will do is draw very, very little power. It will not be a drastic difference on the bill, but electric companies recommend not leaving it plugged in.
Question:	What safety certifications does it have
Answer:	Hopefully the supplier will be able to give the answer b/c I as a buyer cannot say. I haven't had any safety issues, breakage, weak material, bad construction or anything so far even after being in the rain and snowed on . Very well made.
Question:	What is kw output rate
Answer:	Please note that a 20A rated breaker (the one in your panel) will allow 80% continuous current, so 16A maximum. Therefore max theoretical KW output would be 3,840 watts or 3.84KW. However, voltage at your receptacle is probably somewhere between 220-240V. So your max output may vary. Also note that the charger itself has a maximum rating.

Product features

High Compatibility for SAE J1772 Connector EV

The control box has sophisticated protecting features, you could charge it overnight, but to extend its life span longer, try to hang it up and store it inside.

Matters Need Attention

1. Check if you have the suitable outlet in your garage to plug in;
2. This 16A charger needs a breaker circuit at least higher than 18A to handle the current draw otherwise it'll trip your breaker;

Qulified Product for Security

This charger has owned the standard J1772 connector which is UL listed . The control also meets SAE J1772 2010 control principle.

Intuitive LED Light Indicator

The four colored light could show the charging status directly and help you to see it st night. You could refer to the user mannul to find out what each light represent.

Easy to handle and store

The hand-held ergonomic design is comfortable to take and the rubber cover on the top is also a nice touch to keep the water and dirt out.

Package Information

• One charger;
• Tailored-made carry case;
• A user mannul;
• A free adapter;

• [NEW DESIGN, LONG CABLE]In order to meet more demand of customers，Our research team has developed a new generation of ev charger. And our cable’s whole length from wall plug to car plug is 26ft, the length from box to car plug is 24ft,which could meet the need of most customers.
• [PORTABILITY AND EASY OPERATION] When you are traveling or visiting relatives and friends, you don't have to worry about charging, because our chargers can be carried with the car. With the complimentary NEMA5-15-NEMA6-20 adapter, you can use the charger not only in the 220V (NEMA6-20) socket, but also in the 110V (NEMA5-15) socket.
• [HIGH COMPATIBILITY] Unlike normal EV chargers, our EV chargers are compatible with most electric cars, which meet SAE J1772 standard.Only used for electric car charging, not include electric motorcycles. All of our products have passed CE certification, and the quality is superior
• [HIGH SECURITY] Our EV charger adopts High Strength ABS material, which has better quality and high durability. Our chargers have over-current protection, over-voltage protection, under-voltage protection, leakage protection, overheating protection, waterproof rating of IP65 and other safety protection measures. They can secure your car charging

User questions & answers

Question:	Using the nema 6-20 plug and a newly installed 240 volt current, what is the best size circuit breaker that i should use for the line
Answer:	20 to 25 amp. This will pull at max of 15.5 amps
Question:	The pictures show that the length between the nema 6-20 plug and the charging box is 1.5 meters. is that correct
Answer:	Dear Customer, the bare wire is 1.5 meters. Actual length may be slightly different.
Question:	Is the required socket included? If not, which one is compatible with this charging station
Answer:	No, a NEMA6-20 receptacle is not included, although an adapter from NEMA6-20P to NEMA 5-15 (standard wall outlet) is. But tht only gets you Level 1 charging (120V). The NEMA 6-20 receptacle is available from any electrical suply shop including Home Depot and Lowes, or right here on Amazon. Search for Leviton 107-05821-WSP 20-Amp 250-Volt Single Receptacle Electrical Power Outlet, White.
Question:	What would charge time be for 2019 vw egolf
Answer:	Dear customer, hello, your model is for type2 charger, but our charger is type1, so it is not applicable. Morec

• 【 Convenience 】 When You are Traveling or Going Out of Your House, You Don't Have to Worry about Charging Again, Because the Lefanev EV Chargers Can Be Carried with the Car and You Can Check Every Charging Data By Huge LCD Screen on the Charger. All You Need is Just A NEMA 14-50 Outlet to Connect,The Best Voltage is 220V-250V, The Available Voltage Range is 100V-220V
• 【 Max 40 Amp 】 Usually the Acceptable Charge Level is 32~40Amp. According to the Current That the Electric Vehicle Can Accept, It is Intelligently Adjusted to the Best Current, So the Current Will Fluctuate Up And Down. If an Electric Car Accepts 40A Charging, It May Actually Exceed 40A
• 【 High-Speed 】 LEFANEV EV Charging Level 2(220-250V,40A,25ft) Portable EVSE Home Electric Vehicle Charging Station With Nema 14-50 Plug , 10 Times Faster Than Other EV Chargers You ever Used. Unlike normal EV chargers, Our EV Chargers are Compatible with Most Electric Cars, which Meet SAE J1772 Standard.Only Used for Electric Car Charging, Not Include Electric Motorcycles
• 【 Security 】The LEFANEV Level 2 Portable EV Charging Station Adopts High Strength ABS Material, Can Prevent Being Crushed by the Your Vehicle, Our Electric Vehicle Charger Have 6 Major Safety Protection Measures,Can Ensure Stable and Safe Charging
• 【 Worth Having 】LEFANEV customer support is waiting for your contact at any time. Whenever Your EV Chargers Have Any Problem or Anything Simply Not Meets Your Needs, unconditional replacement within 30 days

User questions & answers

Question:	Can you use this charger with 208 V power
Answer:	yes，you can use it from 100V to 240V，but you can not get the rate power, the power is the Actual voltage multiplied by actual current
Question:	does the cable from the control box to the j1772 connector at the control box end have a connector? or is it just a strain relief
Answer:	It is a strain relief, there is no connector on the control box.
Question:	Does it come with wall mount
Answer:	No. It is meant to be portable. But you could theoretically create a mount for it very easily. Works really well for me. It will never work with a120v adaptor though. It's only a level 2
Question:	I do not see telsa listed as one of the vehicles this charger works for. i have a model s. will this work for me car? thank you
Answer:	I believe the charger will work, assuming your car came with extra cables. But this is not the Tesla charger, which is even faster.

Product features

Data Visualization

Our charger features a real time data screen that displays relevant information such as, real-time charging Amperage, actual charging Voltage, total kilowatt consumption, current temperature, and other informative data values.

Smart Adjustment

Usually the Acceptable Charge Level is 32~40Amp. According to the Current That the Electric Vehicle Can Accept, It is Intelligently Adjusted to the Best Current, So the Current Will Fluctuate Up And Down. If an Electric Car Accepts 40A Charging, It May Actually Exceed 40A

SAE J1772 Protocol

40 Amp EV Charger Level 2, NEMA14-50 ,220V-240V Upgraded Portable EV Charging Cable Station, Electric Vehicle Charger Compatible with All J1772 EV Cars

NEMA 14-50 PLUG

Can be used anywhere in America. Don’t worry about the plug adaptation. High quality with reliable service.

• [Two charging modes] Now, MOREC recommends that you use a 16A 100-240V EV charger with NEMA 6-20 plug and NEMA5-15 adapter, which means you can have both level 1 and level 2 chargers, and Use it on both sockets.
• [HIGH SECURITY] Our EV chargers adopt High Strength ABS material, which has good quality and high durability. Our chargers have over-current protection, over-voltage protection, under-voltage protection, leakage protection, overheating protection, waterproof rating of IP65 and other safety protection measures. They can secure your car charging
• [PORTABILITY AND EASY OPERATION] When you are traveling or visiting relatives and friends, you don't have to worry about charging, because our chargers can be carried with the car. All you need is just a 220 V ~240 V NEMA 6-20 outlet to connect
• [HIGH COMPATIBILITY] Unlike normal EV chargers, our EV chargers are compatible with most electric cars, which meet SAE J1772 standard.And our EV chargers are only used for electric car charging, electric motorcycles are not included. 

User questions & answers

Question:	How fast should i expect my ford fusion energi to charge with this when the battery is empty
Answer:	The fusion energi has a ridiculously small range.. With that said it would charge by 2018 volt battery in about 3 hours, which gave me about 58 real world miles. I would expect if your fusion on board charge controller allows for level 2 charging and you are using 240v it would be even faster than that. I would not recommend this product though, I sent mine back because it was Not charging the battery efficiently and reducing my overall mileage ( only getting half charge). This is not a quality product and I wouldn't waste your time and money on it.
Question:	Is this unit UL listed as an assembly? If so, what is the certification number
Answer:	It has a TUV international rating which is equivalent to the UL in the United States
Question:	How fast is this charger
Answer:	depends upon the voltage it is hooked up to, 3.6 kw at 220 or 1.8 at 120v. It works well.
Question:	In one picture the plug appears to have a different shaped plug than the socket. Can you verify that the picture so I don't buy the wrong socket
Answer:	A nema 6-20 plug is what mine came with. I recommend going by the listing description, Which does advertise a 6 - 20 plug which is correct. I believe they offer different plug variations so they are probably using the same picture on each listing and it does seem confusing. Just make sure when you add the item to your cart and you check out that the item description remains a 6-20. On a positive note I can tell you from 1st hand experience that their customer service is excellent and if there were any issues they would solve them right away. I've been very pleased with my charger.

Product features

110V(15A) / 220V(16A) Charger for EV

16A charger 3.68kw SAE J1772 plug with NEMA6-20 power plug.

And give a NEMA5-15 adapter, you can convert the charger from 220V to 110V, 15A.

This electric car charger is your reliable partner for fast charging of electric cars. NEMA6-20 or NEMA5-15 sockets can be used anywhere in your garage or house. It is a household charger that you must have every day.

SUITABLE FOR 110V/220V

Have stronger adaptability. The original NEMA6-20 plug can be used in a 220V socket, and with the supplied adapter, it can be used in a 110V socket, and the voltage can be automatically switched.

INTELLIGENT CHIPS

Intelligent Chip Automatically repairing minor charging problems while charging. The lights would blink in different ways to indicate different problems which will help you to know the charging situation right now

BETTER QUALITY

The IP rating reaches IP65, which is far more waterproof and dustproof than the average charger on the market, and can be used in cold winters at minus 30 degrees (but please do not place it under thunderstorm or heavy rain) The shell is made of high-strength ABS plastic, which has passed the rolling test and can bear the weight of a car.

American universal plug (SAE J1772)

Type 1 plugs are compatible with almost all American standard cars. The tight terminal design prevents dust from entering, and the pins made of silver have good conductivity. It can be used about 100,000 times and is not easily damaged.

Easy Installation

Our charger is ready to plug into any NEMA 6-20/NEMA5-15 outlet and comes with a 5-foot input cable.

When hiring an electrician, request that they install a NEMA 6-20（220V）/NEMA5-15（110V） receptacle for the rating of your Charger.

If your home circuit is 220V, we recommend that you choose NEMA6-20 socket first, so you can have a faster charging speed.

Check Your Socket Circuit Breaker

Our EV Charger working current is 15/16A. Please check your breaker whether more than 16A. (18A, 20A, 30A .... is also OK)

The good choice is the 18A or 20A circuit breaker. Otherwise, it will trip your breaker if the breaker max Amp is lower than 16A

Warning! Fully plug into your socket when using

When using electric products, you need to fully plug into the socket so that metal plug fork can completely connect the socket.

If not, it will burn out socket because the bad connection.

When the charger is not used for a long time, please unplug the power plug to extend the life of the charger.

Product description

The GCP1 is an ac port plug, power inlet, and waterproof electrical outlet with a 16-inch integrated outdoor extension cord that offers optimal flexibility and ease of installation. It works with any extension cord and requires no cable modifications or hand wiring. Its sleek, ultra-low-profile design not only works seamlessly on any application but includes a pressure-fit cap for a watertight seal. And it makes onboard battery charging ports, engine block heaters, or outdoor electrical outlets more accessible than ever before - giving you endless possibilities. Rated at 15-amps, 125-volts (14AWG), designed for use with all types of extension cords with Type-B plugs, and UL approved. Ideal for car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications.

• AC Port Plug - A 125-volt power inlet socket with an integrated 16-inch outdoor extension cord for a car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications
• Waterproof - A rugged, waterproof ac electrical power inlet receptacle featuring a pressure fit rubberized cover rated for outdoor use and protects against the elements
• Peak Performance - Rated at 15-amps with heavy-duty 14 AWG copper wiring to maximum power flow and full-sized AC port prongs for maximum conductivity
• Plug-N-Play - A simple flush mount flanged power inlet that's easy to install, requiring zero cable modification or hand wiring, and mounts into a 2-inch hole size
• Multiple Uses - An outdoor extension cord designed for various uses, including onboard battery chargers, bumpers for engine block heaters, outdoor electrical outlets, and more

User questions & answers

Question:	Can this come as a female outlet and if not, does anyone one know where I can find one
Answer:	I contacted NOCO and they do not make a female receptacle version.
Question:	What gauge thickness is the wire? I will be plugging in the OEM engine block heater, battery blanket warmer, and a CTEK MUS 4.3 Polar charger
Answer:	It's three wire, 14avga. You should be fine running two warmers and a trickle charger. I'm running my block heater, a trickle charger and 600w cab heater...
Question:	Can someone list the overall outside diameter of this? Not the hole diameter for installing but the total diameter of the mounting flange
Answer:	Everyone says three inches, but the part you need to know is the size hole to cut. You will need a 2" hole saw to fit this, I mounted it on the drivers side fender, forward to the front wheel well. You'll also need some stainless steel screws and a normal drill bit to make mounting holes. (actual diameter of penetrating part is 1.92", so with a little room for proper fitment the 2" hole is perfect.
Question:	On a diesel pickup,after having this installed and in the weather for a while, does the protective cover stay in place while driving?Any other issues
Answer:	I installed on Trailready bumper by drilling thru 1/4” steel on my Dodge. Hooked up dual (2) battery warmers, block heater, engine oil pan and transmission pan warmers and trickle charger. Only mod I did was to add an inline LED indicator (in addition to the LED on the extension power cord) as redundant power connection indicator. VERY expensive to thaw out a diesel truck once frozen to -35 or more. So far flawless performance and impressively cover stays flexible and good seal with temps never getting above -30 F for last 30 days. Cover was noted to be flexible at -45. Connecting and disconnecting several times daily. NO issues, would highly recommend.

Product description

Blink HQ, a new family of home electric vehicle (EV) charging products, enables you to charge your vehicle up to six times faster than with the typical charging cord at your house. This Level 2 AC charge station enable electric vehicle to get a complete charge overnight while in the safety your garage or the driveway of your house. Charge your car fast and gain complete range confidence every morning. The Blink HQ is simple to use without the unnecessary complications that come with many of the internet connected smart charging stations. Utilizing an intuitive set of push buttons, the Blink HQ can be set to charge at your convenience with a delay of 2-8 hours, allowing you to save money by charging overnight when utility rates may be lower. Also, the sleek front panel LED indicator displays your vehicle's charging status while a generous 18-foot cable offers flexible installation options. With a compact and sophisticated design and an included bracket for the cable, Blink HQ's small footprint translates to invaluable wall space in the garage. When you purchase the Blink HQ you can stay charged at home and connected when you're out on the road. Order today to get the most out of your EV's range. Experience freedom, confidence and connection with Blink HQ. For your safety, installation by a licensed electrician is recommended.

• Get 25% off as a Blink Pro member (membership is free, visit BlinkCharging.com/Pro).
• Includes 1-YR warranty. Call 888.998.2546 after purchase to register charger
• Level 2, 30 Amp electric vehicle (EV) charging station which charges up to 6 times faster than the standard charger which came with your EV. Wall-mounting bracket included. For your safety, installation by a licensed electrician is recommended. 1-YR warranty included. Stylishly designed and simple to use without requiring an application to run it or home network connection to use it.
• Compatible with all Teslas J1772 adapter (sold separately) and any plug-in vehicle (including Nissan Leaf, Chevy Bolt, Chevy Volt, Toyota Prius, Ford Fusion, VW, e-Golf, etc.)
• Plug in your vehicle, press a button to select the appropriate start delay avoiding peak utility hours, and then monitor your charge state from the comfort of your home with your vehicle’s application, if available.

User questions & answers

Question:	what else do i need to charge my model
Answer:	An electrician to have a 240v 30 amp connection. The truck charges in 3 hours more or less.
Question:	Does this unit plug into a nema
Answer:	No. It’s normally hardwired but you could probably buy the 14-50 cord and connect it to the charger. Great charger for the $.
Question:	How do I get the 25% off as a Blink Pro member
Answer:	Visit BlinkCharging.com/Pro and register for free. You'll receive an email with a unique discount code to use in your Amazon purchase :)
Question:	The manufacturer's website says it requires a 40-amp fuse for protection. Has anyone had experience plugging into a 30-amp fuse
Answer:	Ok from the NEC you are required to run 40 amps for this device. Then what should be done is place a 30 amp disconnect before the device. So from the panel you will run 8 gauge wire to support the 40 amps. Then that will terminate in the disconnect which would be fused at 30 amps. So if the devices pulls more than 30 it will blow the fuse since this device shouldn't be drawing MORE than 30 amps.