12 best fuel tank water remover
A fuel tank water remover is a tool or chemical additive used in the automotive industry to eliminate water contamination from a vehicle's fuel tank. Water in the fuel tank can lead to various problems, including engine misfires, reduced fuel efficiency, and even damage to the engine or fuel system.Here's what you need to know about fuel tank water removers:
Purpose: The primary purpose of a fuel tank water remover is to eliminate or disperse any water that has entered the vehicle's fuel tank. Water can enter the tank through condensation, contaminated fuel, or other means. Removing this water is crucial to maintain the integrity of the vehicle's fuel system.
Types:
- Chemical Additives: Some fuel tank water removers come in the form of chemical additives that are poured directly into the fuel tank. These additives work by binding with the water and allowing it to mix with the fuel, which can then be burned off during normal engine operation.
- Hand Pump: Another type of fuel tank water remover involves using a hand pump specifically designed for this purpose. This pump is inserted into the fuel tank to extract water and other contaminants.
Signs of Water Contamination:
- Engine misfires or rough idling
- Reduced fuel efficiency
- Stalling or engine cut-offs
- Corrosion in the fuel system
- Water droplets in the fuel filter
Usage:
- Chemical Additives: These are typically added to the fuel tank during a refueling. The additive disperses water throughout the fuel, allowing it to be burned off gradually.
- Hand Pump: A hand pump designed for fuel tank water removal is inserted into the tank through a designated access point. It is manually operated to extract water and contaminants from the bottom of the tank.
Preventative Measures: To reduce the risk of water contamination in the fuel tank, vehicle owners can take preventative measures such as using high-quality fuel from reputable sources, keeping the fuel tank as full as possible to minimize condensation, and ensuring the fuel cap is tightly sealed.
Professional Service: In cases of severe water contamination or if you're unsure about how to use a fuel tank water remover, it's advisable to seek the assistance of a qualified mechanic or technician. They can assess the extent of the issue and take appropriate actions to address it.
Safety Precautions: When using any chemical additives or tools to remove water from the fuel tank, it's essential to follow safety precautions and manufacturer instructions to avoid accidents or damage to the vehicle.
In summary, a fuel tank water remover is a tool or chemical additive designed to address water contamination in a vehicle's fuel tank. Removing water from the fuel tank is important to prevent engine and fuel system problems. Depending on the type of remover, it can either disperse water for gradual removal or physically extract it from the tank. Vehicle owners should be aware of the signs of water contamination and take preventative measures to minimize the risk of this issue. If necessary, professional assistance can be sought for severe cases of water contamination.
Below you can find our editor's choice of the best fuel tank water remover on the market
ISO-HEET Water Remover And Premium Fuel Line Antifreeze + Injector Cleaner - Helps Increase Gas Mileage - Improves Engine Performance - Year Round Performance, 12 fl. oz. (28202)
Quality
Style: 28202Verified Purchase
Reviewed in the United States on January 30, 2018
Style: 28202Verified Purchase
Reviewed in the United States on March 23, 2019
Style: 28202-24PKVerified Purchase
Reviewed in the United States on July 2, 2018
Style: 28202Verified Purchase
Reviewed in the United States on March 13, 2018
Style: 28202Verified Purchase
Reviewed in the United States on January 14, 2020
Style: 28202Verified Purchase
Product description
Gold Eagle 28202/HA55360 12 oz Iso Heet Fuel System Dryer and Anti-Freeze Gold Eagle 28202/HA55360 12 oz Iso Heet Fuel System Dryer and Anti-Freeze Features: Dryer and anti freeze Takes out water dissolved in gasoline or diesel fuels Provides quicker starting, prevents stalling Keeps fuel systems clean Recommended for sports cars, snowmobiles, small engines, motorcycles, marine engines, as well as diesel engines 12 oz
- No.1 selling brand of premium gas-line antifreeze
- Absorbs 5 times more water than regular gas dryers
- Removes water from fuel system
- Prevents rust and corrosion
- This item is not for sale in Catalina Island
User questions & answers
| Question: | Would the red one work better for removing water |
| Answer: | Shipping costs @ least $4.00 |
| Question: | As a fuel system cleaner/detergent, how does this compare to Techron as far as effectiveness |
| Answer: | Yes it will fit the Flex water tight Conduit |
| Question: | how do i use it ? is it safe for any car |
| Answer: | No, these are designed for romex/soft sheathed house wire. |
| Question: | Isopropyl vs methanol Heet for removing water, one combine the water so it can be burned out, the other does not. Anybody know which one |
| Answer: | I would say that it won’t. These are based on round cable. The 1/2-inch fits into the 1/2-inch knockout size, but the hole through the gland is round, and while it would work on a 12-3 round cable, I don’t honk it would actually admit a length of Romex. And, I don’t think NM aka Romex is listed for the areas these glands are intended to be used. |
Product features
ISO-HEET Premium Fuel-line Antifreeze Water Remover and Injector Cleaner
Gold Eagle ISO-HEET Premium Fuel-Line Antifreeze, Water Remover & Injector Cleaner is the premium gas-line antifreeze that absorbs up to 5 times the water of regular gas dryers. It is designed for year round use in all 2 and 4 cycle gas and diesel engines. ISO-HEET prevents rust and corrosion by getting the water out. This anti-freeze can be used with every fill up in below freezing temperatures or whenever you want to absorb water from gas or diesel fuel. This product comes in an easy pour 12 ounce bottle.
Usage Directions
Twist off cap. Puncture seal. Pour ENTIRE contents into tank before or after filling with fuel. Bottle treats 20 gallons of fuel. Use with every fill-up in winter, and at least every 5,000 miles in summer to clean injectors. Removes water and condensation in warm, wet weather.
About Gold Eagle Co.
Headquartered in the heart of Chicago''s industrial hub, Gold Eagle Co. is a privately held company, founded in 1932 by Armin Hirsch. For more than 75 years, Gold Eagle has been an industry pioneer in the production and distribution of aftermarket fluids and additives as well as an innovator and leader in the product development, manufacturing, marketing, and distribution of branded engine performance and maintenance chemicals. The Retail and Installer Brands Group within Gold Eagle Co. markets and sells more than 100 branded products, while its Private Brands Group supplies over 400 different OEM and private branded products into the majority of the top engine-related original equipment manufacturers and retail marketers.
Tank Dryer. Removes Harmful Water from Diesel/Petrol/Bio Diesel and Fuel Oil Tanks
Cim-Tek
Product description
Oil Tank Dryer / Water Remover. Removes harmful water from Diesel, Petrol, Bio-Diesel & Fuel Oil Water in your oil tank affecting performance Add this to mop it up! Simple and easy to use! The Tank Dryer is a fuel tank water absorber, which has been developed in response to the increasing concerns regarding water contamination of fuel. By checking for, and removing any unwanted water, the Tank Dryer reduces the damaging impact that this contamination has on machinery and vehicles. The Tank Dryer, or tank sock as it is often referred to, contains highly absorbent silica gel, which when lowered into the tank absorbs up to 350ml of water. Comes with a 2 m attached cord - very quick and easy to use Instructions are included - simply lower tank dryer through the fill point or inspection chamber of your tank, letting it sink into the place at the bottom of your tank and secure using the attached cord. Fits in most 2 inch Fill Points on both plastic and steel tanks Suitabl
- Simple and easy to use
- Absorbs up to 350 ml of water
- Full instructions included
- Fits into most 2 inch fill points in both steel and plastic tanks
User questions & answers
| Question: | Is it reusable or do you replace it when it's full |
| Answer: | Yes but you need another liquid tight adapter for the metal box side of the liquid tight conduit. |
Red Line 60302 Fuel System Water Remover & Anti-Freeze - 12 Ounce
Red Line
Product description
Designed to actually remove water from a diesel or gasoline fuel system. It also works to significantly reduce the freezing point of water in the fuel system. Disperses equal amounts of water in fuel and reduces the freeze point of an equal amount of water to 0 degree Farenheit. Treats 250 gallons and can be used in gasoline or diesel fuel. Also provides excellent fuel lubrication in diesel and gasoline engines.
- Package Quantity: 1
- Product Type: Auto Accessory
- Package Weight: 1.8 Lb
- Country Of Origin: United States
User questions & answers
| Question: | Is this better than heet |
| Answer: | One end connects to an electrical box, the other end connects to 1/2" PVC conduit. |
HEET Gas-Line Antifreeze And Water Remover - Removes Water From Fuel System - Prevents Gas-Line Freezing - Optimal For Winter Use Fast Cold Weather Starts, 12 fl. oz. (28201)
Product description
Gold Eagle HEET Gas-Line Antifreeze and Water remover
- No.1 selling brand of gas-line antifreeze and water remover
- Safe for use in all 4-cycle engines including fuel injected engines
- Prevents gas-line freeze up
- Prevents rust and corrosion
- This item is not for sale in Catalina Island
User questions & answers
| Question: | how many bottles |
| Answer: | I use it in combination with Marvel Mystery oil to make an fuel system cleaner. 5 parts MM to 1 part Heet. Works well in 3 cars I own - 2 Japanese and 1 German made. |
| Question: | Is this the same as Methanol |
| Answer: | Isopropyl Alcohol is the best wetting agent that is commercially available. NOTHING you can buy will mix better with water than Isopropyl Alcohol.ISO-HEET can be used with confidence in all climates -- and when combined with Stabil 360 Protection, your fuel system should be "bullet-proof" all year long. |
| Question: | Yellow Heet fuels my portable alcohol stove on hikes. It burns clean, never any soot. Will red burn the same way |
| Answer: | I can't tell from your question about which type of box you want to make a connection with, but in general: Yes, this is an appropriate way to connect 3/4 inch liquid tight conduit to a 3/4 inch knockout on an electrical junction box or panel. However, you must provide and include grounding conductors for your circuits in the wires pulled through the liquid tight conduit, and properly connect the ground wires to the appropriate termination points. |
| Question: | What is the difference between red and yellow Heet products |
| Answer: | I do not handle a tee type fitting. You may want to contact Arlington Industries directly and see if they make one. Thanks for your interest and sorry I couldn't be more help...DK |
Product features
HEET
Gold Eagle HEET Gas-Line Antifreeze and Water remover prevents gas line freeze up and removes water from the fuel system year round. It is safe for all four cycle engines including fuel injected engines. This product helps prevent rust and corrosion by getting the water out of fuel. It can be used with every fill up in below freezing temperatures or whenever you want to absorb water from gasoline. This anti freeze and water remover comes in an easy pour 12 ounce bottle.
Usage Directions
Press down and twist off cap. Remove foil seal. Pour enitre contents into gas tank before or after filling with gas. Bottle treats 20 gallons of gas. Wipe up spills promptly. Use with every fill-up in winter. Removes water and condensation in warm, wet weather.
About Gold Eagle Co.
Headquartered in the heart of Chicago's industrial hub, Gold Eagle Co. is a privately held company, founded in 1932 by Armin Hirsch. For more than 75 years, Gold Eagle has been an industry pioneer in the production and distribution of aftermarket fluids and additives as well as an innovator and leader in the product development, manufacturing, marketing, and distribution of branded engine performance and maintenance chemicals. The Retail and Installer Brands Group within Gold Eagle Co. markets and sells more than 100 branded products, while its Private Brands Group supplies over 400 different OEM and private branded products into the majority of the top engine-related original equipment manufacturers and retail marketers.
STP Water Remover, All Season Cleaner for Cars & Truck, Bottles, 5.25 Fl Oz, 14259
STP
Product description
This concentrated fuel treatment helps maintain optimum performance all year round. It works to fight rust and corrosion while removing condensation in warm weather, and helps prevent fuel line freeze.
- Fights fuel line freeze and corrosion no matter what time of year
- Helps remove water without alcohol
- Keeps fuel injectors clean
- Helps maintain optimum performance all year round
- Compatible with cap-less gas systems
- Flash point: 44.0 degrees_celsius
User questions & answers
| Question: | can use it for Motorcycle? (BMW s1000rr |
| Answer: | Yes. Been using it for many years |
| Question: | Does this go into the gas tank befote the gas is added and does this clean thr carburetor as well |
| Answer: | It needs replaced when it is full. |
| Question: | Can this be used in diesel engines |
| Answer: | Hi. Thanks for the questions. Yes, Although both ISO-HEET and HEET remove water and prevent freeze-ups, ISO-HEET is specifically formulated to remove more water, but HEET is more suitable for defreezing lines. |
| Question: | Does this product work as stabilizer too |
| Answer: | Although ISO-HEET® Brand does feature an effective fuel system and fuel injector cleaner as well anti-corrosion and rust inhibitors, its focus remains in being a premium water remover and fuel line anti-freeze. I would highly recommend trying it as a cleaner and see the results for yourself, as it is backed by our Full Satisfaction Guarantee. |
UTSAUTO Siphon Hand Pump Portable Manual Car Fuel Transfer Pump for Gasoline Oil Water Fuel Diesel with 2M Syphon Hose Siphoning Kit for Fish Tank Brewing, Portable Widely Use Hand Fuel Pump
UTSAUTO
Product description
Description:
- Universal marine fuel line outboard starter bulb.
- Rubber material, stainless steel clamping.
- The bulbous design retains elasticity and prevents collapse at hot or cold temperatures.
- Long-lasting and durable.
- Easy to install and replace.
- The valve body is marked with arrows to indicate the direction of fluid flow and to prevent fuel from flowing back into the tank and keeping it in the piping.
- Compatible with ethanol blends, engineered low permeability material prevents fuel evaporation and is suitable for boats, caravans, tractors and caravans.
How to use:
- Keep the arrow on the sphere down
- Insert the upper tube into the fuel tank
- Insert the lower tube into the container
- Pinch the rubber ball 3-5 times
Liquid outflow
Warm Tips:
- The liquid you want to extract must be higher than the bucket in which the water is fed.
- The hand crank pump is marked with an "arrow" on its surface. Keep the arrow down before pumping.
- The mounting end must remain inside the fluid, not just on the surface.
- To extract the oil from a car's fuel tank, there must be no backdraft filter in the tank.
- Premium Quality Hand Siphon Pump: Rubber hand pump to start siphoning liquid flowing quickly.2 Double bendable PVC transparent hose, easy to reach into the container, corrosion resistant.
- Easy To Use: built-in inlet and outlet valves to prevent liquid backflow, direct extraction, within a few seconds the liquid flows out as indicated by the arrow
- Multi-function:Lightweight manual transfer pump for vehicles without anti-theft nets
- Wide Usage: This manual water pump is suitable for common liquids such as fuel, diesel, gasoline, oil, water and can also be used as a water exchanger for your home fish tank.
- Note:The liquid you want to extract must be higher than the bucket in which the water is fed. The mounting end must remain inside the fluid, not just on the surface.
User questions & answers
| Question: | what material is the hand pump made of? Is it drinking water/beer safe |
| Answer: | Yes and no.Yes: Heet is allegedly 99% methanol, and according to the BTU rating is 8,900 instead of 9,100 BTUs.No. With the lower BTU rating it has some additivesIf I may be of further assistance just ask. |
| Question: | What is the inside diameter and outside diameter of the hoses? I will need to purchase a longer exit hose |
| Answer: | I've been using Heet yellow in alcohol burners for the last ten years or so. No soot at all and great heat output. You can't go wrong here. And the best plus? No matter where you find yourself there is probably a auto parts store nearby... Voila, Heet. |
| Question: | can i just manually pump the liquid if it is not higher than the receptor tank |
| Answer: | For snowmachines with EFI, you need to use the RED Heet. |
POR-15 49204 Fuel Tank Sealer - 1 Quart
POR-15
Product description
POR-15 Fuel Tank Sealer is a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a higher alcohol content, and additives. It has superior strength and fuel resistance. POR-15 Fuel Tank Sealer stops rust, corrosion, and fuel leaks.
- It has superior strength and fuel resistance
- Package Dimensions: 10.668 L x 11.938 H x 10.668 W (centimeters)
- Package Weight : 2.499 pounds
- Country of Origin : United States
User questions & answers
| Question: | will the sealer work if it is only coating the inside bottom of the tank i'm not sure about a quart being able to coat the entire inside of the tank |
| Answer: | No. You should add it after you fill the tank up, so it can mix with the gas. And yes, it should also clean carburetor. |
| Question: | Can i use this on a plastic fuel tank |
| Answer: | No, there is a product for Diesel engines, under 911 brand |
| Question: | Why does por-15 fuel tank sealer one pint can have two different numbers? I have seen 49208 and the one here |
| Answer: | Thank you for submitting your question. STP Gas Treatment functions as a fuel stabilizer as well. STP Consumer Care. |
| Question: | Can this product be used on a fiberglass fuel tank |
| Answer: | It is not one bottle as everyone here is saying. Read the title, it clearly states that it is for 24 bottles. "HEET 28201-24PK Gas Line Antifreeze and Water Remover, 12 Fl oz. (Pack of 24) " |
DEWAY Automatic Fuel Transfer Pump - 3X More Powerful D Battery Powered, Extra Long Hose Fits All Size Cans, Portable Liquid Pump Transfers Gasoline, Water & More at 2.3 Gal/Minute
DEWAY
- STOP LIFTING HEAVY CANS | Flexible System Finally Gives Your Back a Break | Operate the Pump with One Hand or 100% Hands-Free—No Heavy Lifting! | Extra Long Transfer & Suction Tube Easily Reaches Inside High Cans, Big Water Jugs & Other Large Tanks, While the Oversized Transfer Hose Provides Further Length & Reach
- 3X MORE POWERFUL D BATTERY OPERATED | Insert two D 1.5V batteries (not included) into the compartment and enjoy hours of dependable liquid transfer—anywhere in the world! Great for filling up off-road vehicles, lawn equipment and more
- SUPER FAST SUCTION PERFORMANCE | With Just [2] D 1.5V Batteries, Move Any Compatible Liquid at Lightning Speed! | Pump Performs Faster Than Most Competitors at Rate of 2.3 Gallons Per Minute—Perfect for Swift Siphoning on the Side of the Road, in the Field, On the Job or in the Driveway | RoHS & CE Certified
- POWERFUL ALL-PURPOSE TRANSFER HOSE | Portable Device Allows You to Siphon & Transfer All Kinds of Non-Corrosive Liquids & Fuels with the Flip of a Switch! | For Use with Gasoline, Kerosene, Diesel, Light Oils, Non-Potable Water, Chemical Insecticides, Soaps, Detergents, Deodorants, Mild Acids, Antifreeze & Beyond
- PROFESSIONAL & EVERYDAY APPLICATIONS | Go-To Device for Anyone in Need of Stress-Free Fuel or Liquid Transfer | Use to Fill Up or Empty Your Emergency Generator, Riding Lawn Mower, Yard & Garden Equipment, Utility & ATV Vehicles, Construction Machinery, Cars, Motorcycles, RVs, Cleaning Equipment & More!
User questions & answers
| Question: | How long is the "extra long" transfer tube that goes from fuel can up into tractor fuel tank |
| Answer: | Rubber hose...same as in your auto. |
| Question: | Have a lot of diesel to get out of these fuel tanks, does this work good with diesel |
| Answer: | Dear ,the inside diameter is 0.021inch ,you can see the pictures ,and select one you need. |
| Question: | Is this made in the USA |
| Answer: | Yes but it is very slow |
| Question: | does it have a filter |
| Answer: | Yes, maybe divide 6 times, don’t use too much at once |
Product features
Easy To Use
Power Switch turns the pump on and off with one simple button.
Extended Tube & Hose
The main suction tube and transfer hose are designed for maximum reach, so you can easily siphon from big 5-gallon water jugs or bulky jerrycans into high-up vehicles or machinery tanks.
Swift Transfer Speeds
Handle high volume jobs without the wait. The pump transfers liquid at a rate of 2.6 gallons per minute—just slightly slower than the actual gas pump! Great for home and onsite applications.
Portable Battery Operation
Insert two D 1.5V batteries (not included) into the compartment and enjoy hours of dependable liquid transfer—anywhere in the world! Great for filling up off-road vehicles, lawn equipment, and more.
Skip the Seal
No external parts or accessories required. Once the hose and tube are in place, liquid flows without a single splash. Designed for use with gas, kerosene, diesel, light oils, non-potable water, and more.
Narrow Tube Diameter
Inserts into any size gas can, bucket, tank or vessel; siphons out liquid for transfer to final location.
KBS Coatings 53000 Auto Fuel Tank Sealer Kit, Seals Up to 25 Gallon Tank
KBS Coatings
Product description
The KBS Fuel Tank Sealer Kit contains everything you need to seal a tank of up to 25 gallons. Gold Standard Fuel Tank Sealer is a superior, single-component, ready-to-use fuel tank sealer. Gold Standard Fuel Tank Sealer is specifically formulated to stop rust and corrosion by forming a tough, fuel impervious coating while simultaneously sealing small pinholes and weld seams. This kit contains our KBS Klean (a water-based, heavy-duty, cleaner/degreaser) and RustBlast (a powerful rust remover/metal etch) to obtain a permanently sealed, rust-free fuel tank. These KBS prep products are formulated to extend storage times by leaving a zinc phosphate film.
- The KBS Auto Fuel Tank Sealer Kit contains everything needed to seal a tank of up to 25 gallons. It is an All Inclusive Kit!
- This Kit Includes KBS Klean, RustBlast, Tank Sealer, Gloves and Complete Directions.
- The Tank Sealer Permanently seals pinholes & weld seams and is Impervious to all fuels, alcohol additives and most solvents.
- This Kit eliminates all rust and corrosion meaning no clogged fuel filters.
- The Tank Sealer is flexible and able to expand and contract with your tank.
User questions & answers
| Question: | Will this sealer work with biodiesel |
| Answer: | A quart is enough to handle a 25 gallon fuel tank. Follow the directions on the can or POR-15's website and swish the sealer around to cover the entire surface of the tank. |
| Question: | Will this work on plastic tank |
| Answer: | This sealer is meant for a metal gas tank, I don't believe that it would be effective on a plastic tank. |
| Question: | Will this sealer work with biodiesel |
| Answer: | The 49204 is the quart can and the 49208 is the pint can. |
| Question: | How big is the can of tank sealer? A quart? Are all three products a quart in size |
| Answer: | No |
ComStar 60-130 Super Heat 8-In-1 Heating and Fuel Oil Treatment, 16 oz (single pack)
Product description
Super Heat's original 8-in-1 fuel oil treatment is professionally formulated to protect outside, inside and underground fuel tanks all year round and to eliminate all problems associated with cold weather. Protects against winter freeze-ups from ice and sludge, prevents corrosion of tanks and filters and extends fuel usage. Used by professionals for over 30 years to eliminate service calls. One pint treats 550 gallons.
- Melts ice and lowers pour point in fuel tanks
- Controls waxing and jelling
- Eliminates water and dissolves sludge
- Cleans strainers, filters and nozzles
- Reduces soot by 50percent and eliminates bacteria breeding grounds
User questions & answers
| Question: | Is this the same as fppf chemical? I usually use that. Also can i pour the whole bottle into my 275 gallon oil tank even though it says it treats 2x |
| Answer: | Not long enough, I have a Branson 2510 and I had to set the 5 gal fuel container on a block and than it reaches, it did work good and didn't leak any diesel, l intend to extend the hose and hope it will have the lift capability to pump from the ground up to the fuel tank inlet on top off the hood. |
| Question: | Does this break down sludge |
| Answer: | I couldn't get this pump to work at all the impeller spun but would not pump. So I sent it back. |
| Question: | What Is It Made Out Of |
| Answer: | N0 |
| Question: | It says 8oz pack of |
| Answer: | I can't see a filter as the impeller blades block the opening of the housing. I would check with the manufacturer. |
CRC 05670 Diesel Dry Diesel Water Remover - 12 Fl Oz.
CRC
Product description
Effectively disipates and removes large amounts of water in diesel fuel to minimize smoke and improve fuel economy.
- Country Of Origin : China
- The Package Height Of The Product Is 9 Inches
- The Package Length Of The Product Is 3 Inches
- The Package Width Of The Package Is 3 Inches
User questions & answers
| Question: | Will this work for treating diesel fuel for heating a home |
| Answer: | Yes, the Tank Sealer is impervious to biodiesel. |
| Question: | What is the mix ratio |
| Answer: | Not sure about that. Some plastic tanks is hard to glue period. If I bought the kit I would clean off a place on the outside of the tank and do a test on that area. If it stuck good. You couldnt pull off or scrape off then I would use it. If I didnt want to gamble with the kit I might also try to sand a spot where the leak is and clean good after sanding and then try Epoxy on that spot. If its impossible to get off without major work then that is what I would use to repair the tank from the outside. Hope something works for ya. |
| Question: | will it do damage to add 2 bottles to 100 gallon fuel tank |
| Answer: | Yes, the Tank Sealer from KBS Coatings does withstand bio-diesel. |
| Question: | Does it have any negative effect on diesel particulate filter |
| Answer: | Yes, a Quart of Tank Sealer. A Quart of RustBlast. 2 Quarts of KBS Klean. |
REACH AUTO PARTS Newest High Flow Siphon Hand Pump Portable Manual Car Fuel Transfer Pump for Gas Gasoline Petrol Diesel Oil Liquid Water Fish Tank with 2M Syphon Hose
REACH AUTO PARTS
Product description
The Way To Use：
1. Keep the arrow on the sphere down
2. Insert the upper tube into the fuel tank
3. Insert the lower tube into the container
4. Pinch the rubber ball 3-5 times
5. Liquid outflow
Warm Tips:
1. The fluid you are trying to extract has to be HIGHER than the influent bucket.
2. There's a mark "arrow" on the surface of hand pump.Please keep the arrow down before pumping.
3. The fitting end must kept inside of the fluid not just on the surface.
4. To extract the oil in the fuel tank of the car, there must be no anti-pumping filter in the fuel tank.
Package List:
1 x good suction sphere
1 x Hose(L:2m, D: 21mm. Needs to be cut customized and installed depending on your needs.)
2 x valve clips
Flow Rate: 10L/Min
- High Flow Hand Siphon Pump: With L2m D21mm durable lengthen and thicken clear PVC pipe, oil, high temperature and corrosion resistant makes this pump transfer more quickly, pumps 10L/Min.
- Easy To Use: Built-in outlet and inlet valve to prevent backflow, extraction directly, liquid outflow in 5 seconds. The arrow indicates flow direction.
- Multi-function: Lightweight and portable hand transfer pump, ideal for vehicles without anti-theft filter net, such as lawn Mower, brush cutter, hedge trimmer, etc.
- Wide Usage: This manual water pump is for fuel petrol diesel gasoline oil water and other common liquids, also can be a water changer for fish tank at you home.
- Note: The fluid you are trying to extract has to be HIGHER than the influent bucket. The fitting end must kept inside of the fluid not just on the surface.
User questions & answers
| Question: | Is the bulb rubber or plastic |
| Answer: | I can’t answer your question about the chemical. Our oil delivery guy pours the whole bottle in our 550 gal tank. Our burner runs smooth. |
| Question: | I need a new section of tubing, the stores do not handle this type, can I buy from you |
| Answer: | yes and assist with water in the fuel line |
| Question: | Can this be connected to a hose? I need to siphon water from above ground pool and out of my property with a hose |
| Answer: | Read the label in the picture |
| Question: | Can this be used for wine and mead |
| Answer: | It’s just one bottle 16 ounces but it treats up to 550 gallons of oil. I ran my tank dry and put a whole bottle and and all I had to do was bleed the line and everything was fine when I got my oil. Last year everyone’s lines and outside filters were gelling up and I had no problems. I highly recommend it for trouble free heating |
Latest Reviews
View all
North States Industries Baby Play Gates
- Updated: 22.06.2023
- Read reviews
Waxing Kits
- Updated: 28.05.2023
- Read reviews
Geometry Textbooks
- Updated: 19.05.2023
- Read reviews
Red Ear Wax Removal Kits
- Updated: 06.01.2023
- Read reviews
Hard Wax Machine
- Updated: 25.02.2023
- Read reviews