8 best tools scanners

Product description

Car diagnostic scanner

OS601 is a cost-effective upgraded version of OBDII scanner for determining the cause of the Check Engine Light. Equips with a 2.4-inch color screen and shows live vehicle sensors data in text and graph format. Support all the 10 OBDII test modes, enhanced Mode 6, read&erase codes, code definitions and playback data from the car ECU. It enables you to inspect monitor before Smog check, and switch off the MIL.

How to get started?

Simply plug into the OBD2 port on your car and turn ignition on and you ready to go.

No matter where you are, let this gadget accompanies with you. Let you decide if it's something you can fix or need more advanced help. Save money and time.

Where's the OBDII interface?

It is often under the dash, or under a panel below the handbrake in the center console.

What is OBD-II?

On-board diagnostics (OBD) is an automotive term referring to a vehicle's self-diagnostic and reporting capability. Vehicles produced after 1996 use OBD-II, which is a standardized system that simplifies the process a whole lot. These vehicles all use a common diagnostic connector and a set of universal trouble codes. Though only emission-related codes and data are required to be transmitted through it according to U.S. legislation, most manufacturers have made the OBD-II Data Link Connector the main connector in the vehicle through which all systems are diagnosed and reprogrammed.

At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue.

Why I can't erase the fault code?

Once the monitors are reset, the MIL will either remain out because the DTC was corrected by the proper repair, or it will illuminate because it has again detected the problem.

• Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars (made in 2008 or later), and all OBD II/EOBD/CAN-compliant vehicles.
• Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing; turns off check engine light and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data.
• Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc).
• Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN (Controller Area Network).
• No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. Supports multi-language display (English, German, Spanish, Dutch, Russian).

User questions & answers

Question:	Funciona para un Aveo
Answer:	No se
Question:	Why I can't erase the fault code
Answer:	Thank you for your question. At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue. A fault code which provide a jumping off point in the diagnostic process. Then probably the vehicle still has a an issue. Codes only erase if the problem is repaired.
Question:	How can update os601? when do i need to upgrade it
Answer:	Contact the seller for an upgrade package. The upgrade is free. Anytime
Question:	How do you upgrade the software once it is out of date
Answer:	Thank you for your question. In most cases, the upgrade is to fix bugs in the software. In general, a six-month upgrade is sufficient (Because the support for the OBD-II protocol is stable). For other situations of upgrade or diagnosis, you can collect the corresponding model information and send it to us to provide more services. 【How to upgrade?】Connect scan tool with PC through Mini B connector(5 pin) at the bottom of the machine, migrate the upgrade data into it. For more detailed information, please email us via the station and we will send you the upgrade file. May you have a nice day! Warm Regards, Juta Auto

• Classic design, fast scan and clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time.
• Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
• Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
• The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
• It's equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.

Product features

Key Features

Code Definition

• 1⃣【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
• 2⃣【 Error Fault Code Reader 】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
• 3⃣【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world like ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
• ⃣【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】※Live Data Graphing ,more intuitive to know your vehicle’s problem . ※ Large size Color Screen ;※ Print Function:Print the diagnose result easily; ※ with user manual and register & update tutorial video uploaded in the link by us, you can Look up it anytime by ONE-CLICK.
• 👉👉【We Always Got your BACK ! 】This original Launch scanner is backed up by Launch official after-sale services with 5-year warranty, available 60-days return & replacement policy, and 24/7 thoughtful support. We, the authorized Launch seller, provide you with 2021 newest original Launch CRP123 with reliable quality. ([email protected])

Product features

Engine:

Today’s engines are complex systems, using feedback loops from intake air temperature and flow, manifold absolute pressure, engine coolant temperature, crankshaft and camshaft position, oil pressure, fuel rail pressure, fuel tank pressure, vehicle speed and many other inputs to determine correct air/fuel ratios, camshaft timing, ignition timing and other, critical, operational parameters. The LAUNCH CRP123 OBD2 Scanner speeds diagnosis by providing the user access to critical OBD II standard data as well as extended, manufacturer specific, data on engine, fuel, emissions and performance parameters, at the touch of a button.

Transmission:

Today’s automatic transmissions (A/T), like our engines have evolved into a complex system of mechanical, electrical and control systems interaction. Today’s transmissions provide a wealth of information about the success of up and downshifts, solenoid action (too harsh, too soft), clutch engagement, fluid temperature, fluid level, pressure, and other, critical, operational and diagnostic information. The LAUNCH CRP123 OBD2 Scanner provides the user a detailed view into this critical components operation and function, allowing fast, accurate and complete diagnosis of existing, or potential issues.

ABS:

Like other systems, braking systems have evolved and become more complex, with multiple sensors and actuators operating together to make braking more smooth, consistent and safe for everyone. The LAUNCH CRP123 obd2 scanner allows the user to monitor and diagnose critical ABS systems to ensure that repairs to this critical system are effective, and complete.

SRS:

A well-functioning, always ready, Supplemental Restraint System (SRS) is absolutely critical for occupant and driver safety. Even minor issues might impact the operation, and performance, of the SRS system. The LAUNCH CRP123 obd2 scanner quickly, and efficiently, allows the user to retrieve, read and interpret SRS system issues and monitor SRS system functionality to rapidly diagnose, and repair, the cause of the issue. Once repaired, the CRP123 will allow the code to be cleared and the SRS system to be tested, by the PCM, to ensure that the fixes are complete.

Launch Creader CRP123 Multiple Languages Supported .

Multiple Languages Supported:

• English,French,Spanish,
• Japanese,Portuguese,German,Russian

Thus, if you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.

View Live Data Graphing of Engine/AT/Airbag/ABS System

• 4 Live Data Stream Analyse in 1 Graph: This OBDII diagnostic scanner has big size LCD color screen .it also shows live vehicle sensors data in text,multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters of Engine & AT & Airbag & ABS System.

Free Update ? Yes ! Free Update for Life-long time

You will enjoy smooth updating process (Noted: The scanner device is compatible with Windows7/8/10). Different from limited free update, X431 CRP123 provides you with free update for life time.

crp123 obd2 scanner :Launch CRP123 Packing List:

1 piece* CRP123 Main Unit

1 piece* USB Cable

1 Piece* Main cable

1 piece* Card Reader

1 piece* User Manual – 1 Piece* Carton Box​ – 1 set Car Panel Removal tool (Gift)

crp123 obd2 scanner

HOW TO REGISTER & UPDATE?

Step 1: Go to LAUNCH official website(refer to the "user manual" in the "Technical Specification "section of product webpage) and click Updating Tool Download icon.

Step 2: Download and install the CRP123 update tool and launch the program when installed.

Step 3: You will be prompted to type in the serial # (located on the back of the tool)

Step 4: Hit [Device Upgrade] to enter the register page, type your email info (check the "Register Code" on the device menu "Help--Tool Information" ).

Note: the “User password” is equal to the “Register Code.”

Step 5: Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU.

Step 6: Reopen the CRP update Suite and select the updates you would like to preform or click select all and click Download.

Step 7: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.

• · 【Powerful Check Engine Light Diagnostics】Can read and diagnose your check engine light, understand the severity of the issue, and clear fault codes in a blink of an eye. More functions compared to other simple scanner like I/M Readiness, Battery Health Check, Freeze frame, O2 sensor test, On-Board Monitoring, Evap system test, Performance Test, Data Stream, and Diagnostic reports, Handy google search button, Built-in OBD II Fault code look-up library.
• 【Necessary Battery Tester】Have you ever noticed many other scanner tools without battery tester functionality, which costs you extra or more, However, AUTOPHIX 3210 can Check the health of your battery and voltage with a tap on your phone screen, so it is in great condition when you need it the most on a freezing winter day without opening the bonnet.
• 【 Key Point】Don't just read vehicle malfunction codes and give you code definitions, but more importantly informs you what the possible problems are with your vehicle, even if you know absolutely nothing about cars. We are here to help you know the car troubles and clear the error code for saving money, so the understandable fault code definition is important for you.
• 【 Works on your car and your Language】A necessary wireless/Bluetooth car diagnostic tool/fault code reader for today’s car owners, downloadable on both iPhone iOS, Ipad and Android and supporting major vehicle brands and models 1996 or newer. Works in English, German, Spanish, Finnish, French, Italian, Dutch, Portuguese and Chinese.
• 【Autophix --Repairing and Solution Consultant for your Car】Proudly designed in the USA by Professional Engineers. Tested in 50+ local car dealers in the United States before Mass production. Autophix only does car scanning. We are professional for your cars.

User questions & answers

Question:	Can this be shipped to the US? All the addresses i put in wont work
Answer:	Is your Amazon site in Canada? Change your store your shopping at to US . :)
Question:	Connected but no response while engine running
Answer:	The engine is not to be running.
Question:	Does this device tell the miles of the vehicle
Answer:	Sorry, the major function of this scanner is detecting engine system. It will not show miles of the vehicle.
Question:	i work with 2011 and newer f-350s and f-550s, will this show me ABS and wheel speed sensor data as well
Answer:	Hi, friend, thanks for your inquiry! The main function of this scanner is reading and clearing fault codes for engine codes. It will not show the ABS and wheel speed sensor data. So sorry for that we cannot provide useful information for you. If you have any questions, please contact us. Have a good day.

Product features

What does Autophix 3210 obd2 bluetooth scanner do?

Read codes&Erase codes : Quickly read the error code in 3 seconds and clear pending error code, help you save time and money to fix it yourself if possible.

Built-in OBD II Fault code look-up library : Instead of just giving you a cryptic description of what a trouble code means, we offer a lot more information on trouble codes

Evap system test: Prevent gasoline vapor evaporated from the fuel tank of the car from being discharged into the atmosphere

Data stream ：Display various vehicle real-time parameters

O2 sensor test ： Detect the oxygen content in the mixture.

Real Time Battery Voltage :Show the real-time voltage changes to monitor your battery health.

Live Data : Show each data source as a Graph, Gauge, or Digital Display ; Customize the colors ; Resize and place in any arrangement.

Important Vehicle Information : Vehicle specifications.

Freeze Frame : Get a snapshot of the vehicle when a Freeze Frame Code was stored.

I/M Readiness/Smog check : Determine if your vehicle is ready for an smog test.

Mode 6 : Advanced test results (like misfire counts) for On-Board Diagnostic System Monitors.

• 🌲【ABS&SAS&SRS SCANNER】FOXWELL NT630 Plus ABS & Airbag OBD2 scanner does not only provides accurate and professional diagnosis of ABS/SRS/SAS faults , but also removes air from the internal brake fluid chambers after servicing the brakes. 👉TIPS: It can not remove airbag crash data or collision data.
• 🌲【ABS BLEEDING SCAN TOOL】Anytime the brake system is opened to replace components such as calipers, wheel cylinders, the master cylinder, or brake lines or hoses, air gets inside. The air has to be removed by bleeding the brakes if you want a firm brake pedal. You can use this diagnostic scanner to help bleed the brake, cycling the pump and valves during the bleeding process.
• 🌲【ACTIVE TEST】The OBD scan tool temporarily allow you to active or control ABS/Airbag system and component, including switches, sensors, relays& actuators. It saving your time and labor costs.
• 🌲【PERFECT COMPATIBILITY】The diagnostic scanner for automobiles is compatible with almost all OBDII cars, SUVs, minivans, light-duty trucks sold worldwide, Which makes it suitable for both mechanic and DIYers. ABS and SRS Coverage for 60+ Vehicle Makes. SAS calibration is on 30+ selected make.
• 🌲【UPGRADE AND NO WORRIES】The update tool FoxAssist allows you update& uninstall software, save & print data, gaining more available vehicle models and language on the original basis free lifetime. And there is a technical assistance for timely and effectively solving the quality problem within 24 Hours.

Product features

Up to 2019

1.ABS and Airbag coverage includes 58 manufacturers.

2.SAS(Steering Angle Sensor) Calibration on more than 41 vehicle makes.

3.Works on the latest 2017/2018/2019 models including cars, SUVs, minivans,light-duty trucks sold worldwide.

AutoVin

Auto VIN is a shortcut for VIN reading menu which typically includes following options:

• Automatic VIN Acquisition
• Manual input VIN

If takes too long to get the VIN code by automatic, press Cancel to stop and input the VIN manually.

Download FoxAssist to Upgrade

1.Register on foxwelltechdotus and Download FoxAssist from NT630 Plus page.

2.Install FoxAssist and Register an account.

3.Activate by inputting the serial number of your NT630 Plus.

4.Connect the scanner with PC via USB cable, then you can choose the car makes to update.

• 😀【Vehicle CEL Doctor】The obd2 scanner can quickly help you read DTCs (engine fault codes), locate bad O2 sensor, access to emissions readiness status, turn off check engine light(CEL) or MIL(Malfunction Indicator Lamp) , reset monitor, read enhanced data and retrieve VIN of your vehicle.
• 😀【Accuracy】Live data in both graph and text forms. Accurately read vehicle error codes for most Worldwide cars, SUVs, light truck and 12V diesels equipped with Obd2. Besides, the car scanner also shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom-specific data parameters.
• 😀【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Supports data logging and Printer compatible. Unique PATENTED design, clearly arranged keypad, 2.8" wide color screen with Life-Time Free software update and 1 year quality assurance, it deserves to own. Supported by EXCLUSIVE engineer and service team for product and service quality. (Please note currently the package does not include a CD. )
• 😀【Smog Check Helper】Read/Erase and I/M readiness hot keys make it easy to use this car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for smog test. The obdii scan tool also help catch intermittent problems and confirm repairs during a drive cycle, so that help you quickly determine the health of the car.
• 😀【Home Necessity】NT301 car scanner is open to global customers. No battery required, it is charged directly from the OBDII interface in your vehicle (please turn your vehicle ignition on), making it convenient for Home and Autoshop Mechanics. It is recommended as a necessity in your toolbox and one of the best gifts for father. (Quick Start Guide is included in the package.)

Product features

FOXWELL NT301 OBD2 SCANNER

As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. However, most of them don't know they could make it off themselves with dozens of dollars - using NT301 obdii code scanner. This auto code reader could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop. Altogether, the Foxwell NT301 car diagnostic scan tool would save you much time and money. It is also a great choice if you are looking for an obd scanner well-built, easy-use with wide vehicle coverage. (Please note, UPDATE IS NOT NECESSARY before utilization, and NO NEED TO REGISTER on Foxwell website before update. The upgraded NT301 cable is long enough to use at the passenger seat. )

Product Features:

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.

2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.

3. DTC definition can be automatically displayed after reading, press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

4. Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.

5. Reads, records, graphs & playbacks(data logging) live sensor data.

6. Reads live O2 sensor/on-board monitor test data.(Full OBD modes including Mode 6 and Mode 8)

(Beeping: means your NT301 has diagnosed faults codes in your car. If you do not wish to hear the noise, please enter Settings to set it.)

Full OBD Service Modes

The Foxwell NT301 OBD2 universal check engine light tool is made to easily read and erase engine codes. It is an enhanced OBD II and EOBD scanner that covers all obd2 protocols and all OBD diagnostic services, therefore it will work with virtually any vehicle equipped with obd2 and view more powertrain diagnostic data than other obd2 scan tool.

Specially Designed for Home Diagnostics

The code reader car diagnostic tool is specifically designed for car owners to identify problems with their vehicles before taking them to a mechanic. It is therefore ideal for use at home, and is very easy to use. Moreover, it will save lots of car maintenance costs for you. Simply plug it in and hit enter. It supports all OBD II functions, and will therefore work for all vehicles compatible with standard obdii protocols.

Enhanced OBD II functions

NT301 obd2 scan tool can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier.

LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

Data Log: The NT301 engine code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.

DTC Help: Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.

Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Save Time and Money

Perform a complete diagnosis of your car anytime, anywhere with Foxwell NT301 check engine light diagnostic tool. It is designed for fast use so you can get the results you want in the shortest time with one-click hot keys for reading/clearing DTCs. It enables you repair the problem yourself, or let you know exactly what needs replacement in case you need to take your car to a repair shop. This helps you avoid blind maintenance and repair costs that could amount to hundreds or thousands of dollars. You also avoid being pushed to buy parts that you do not need because you know exactly what is wrong with your vehicle.

To know if you are ready for a smog check, press I/M button(rubber) for 3 seconds.

User-friendly Design

Hand-held size, clearly arranged keypad, menu-driven navigation, hotkeys and 2.8'' color screen together make the engine tool extremely easy to use.

What live data can be read by this device?

How much data can be read depends on the vehicle, there are over 40 graphing live data (Download the Specification Sheet to get a whole list), to list some: FUELSYS(fuel system status), LOAD_PCT(Calculated load value),ECT(Engine Coolant Temperature), SHRTFT(Short term fuel trim-bank), LONGFT(Long term fuel trim-bank), Engine RPM, VSS(Vehicle Speed Sensor), SPARKADV(Ignition timing advance for cylinder 1), IAT(Intake air temperature), MAF(Mass Air Flow), TP(Absolute Throttle Position), O2SLOC(Location of Oxygen Sensors), O2B1S2(Oxygen sensor output voltage (B1-S2), SHRTFT(Short term fuel trim), OBDSUP(OBD requirements), MIL_DIST( Distance traveled while MIL activated), EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), O2B1S1(Oxygen sensor output voltage), EVAP_PCT(Commanded Evaporative Purge), etc.

Optional Carrying Case

With this Foxwell NT301 protection carrying case, you can prevent it from being damaged whether you place it in a trunk, toolbox, or garage.

Can it be upgraded on MAC system?

Sorry, the NT301 scan tool can be updated on Windows systems only(including windows 10), please visit Foxwell official website and download NTWonder and update.

Will it read ABS/ airbag codes?

Sorry, NT301 obdii scanner is able to read and clear check engine information which is part of OBDII system, but it cannot work on non-OBDII systems(ABS/airbag/oil service light,ect.). While FOXWELL NT630 Plus can reset airbag/abs service light, FOXWELL NT614 Elite support transmission and can reset oil service light and EPB, and FOXWELL NT624 Elite can do a full-system diagnostics.

• NOT COMPATIBLE WITH iOS DEVICES - (iPhones, iPads etc); OUR BLUETOOTH OBD2 scanner IS ONLY COMPATIBLE WITH ANDROID OR WINDOWS DEVICES; For iOS devices, see our WiFi OBD Reader
• READ & RESET - Our OBD2 diagnostic scanner tool will work on all cars purchased in the USA model year 1996 or newer; Unlike other OBD2 scanners, ours works on ALL OBD2 protocols including J1850 and CAN; With our scan tool you can read & reset the check engine light on your car with ease
• REAL TIME - Monitor the diagnostic sensors in your vehicle in real time for things like O2 data, fuel pressure, EVAP system & more; Car reporting an EVAP code? Check your O2 readings to see which sensor is faulty and get it fixed; React quickly to problems like a professional mechanic
• HUGE APP SELECTION - 3rd party app must be downloaded to use; Choose from many OBDII apps such as Torque Pro, Piston, Dash Command, OBD Fusion & more; Some OBDII readers limit you in which apps you can use, not BAFX Products; Choose an app at a price that meets your needs
• This OBD2 scanner does not read ABS, SRS, TPMS or Oil Change lights; WARRANTY - 2 Year manufacturer warranty with USA based friendly support staff; Don't be left stranded by support

User questions & answers

Question:	Will it read ABS codes
Answer:	I do not know...if you have a security light flashing I would go to an Auto Zone they will do a free scan to tell you what is wrong with it and if it can be fixed or you may have to go to a dealership to have it fixed ....
Question:	Does this work with Windows Phone
Answer:	The Maxiscan MS300 is also an Autel product. It is a legacy product that has been superseded by the Autel AutoLink AL301¹. As is customary for these entry-level devices, it only reads / reports the generic OBD II codes. To move up to manufacturer specific codes one must move up to the Autel AutoLink AL319². Keep in mind that not ALL manufacturer specific codes are possible to read / report on. Some are kept secret by the vehicle manufacturer to ensure the dealer techs get a shot at your wallet once in a while. ^_^¹ http://www.auteltech.com/autelcms/Code%20Readers&Code%20Scanners/357.jhtml² http://www.auteltech.com/autelcms/Code%20Readers&Code%20Scanners/358.jhtml
Question:	can i leave it plugged in
Answer:	Yes.It has an I/M Readiness mode that is able to show you the details of the readiness of each major emission monitor. There is even a button on the device that can select this directly without having to navigate through the menus.There is also a lamp on the device that indicates if any emission monitor is not ready.It is my understanding that the requirements for I/M readiness for each vehicle may differ from state to state.I had a problem with an air monitor coming ready after I identified, resolved, and cleared the underlying code. It took miles of specific type of driving to clear this monitor status (which cannot be cleared by the device.)When I returned to the inspection station I was informed that all monitors are not required to be ready to pass New York state inspection, and that my extra driving for this situation was unnecessary.
Question:	does it pick up abs codes
Answer:	It gives a text explanation of the code (eg. Nissan code P1135 = 'Intake Valve Timing Control Bank 2'). Beyond that, you're having to look online or in service manuals to determine what the message actually means and how to resolve it.

Product features

Quickly Diagnose and Analyze Car Problems

Warning lights flashing up like an airport runway? Tear your eyes from that depressing dashboard and connect your BAFX Products Diagnostic Car Scanner & Reader Tool.

See what the issue with your car is within moments, and depending on your model you can -

•Read and clear your ‘Check Engine' light

•Identify those annoying car troubles before they become serious

•Get readings on your emissions to ensure you’ll pass any tests

•Check you air/fuel ratio •Confirm your O2 sensors are working properly

•Obtain info on a variety of other car readings

Reliable and Consistent

It’s no secret that many diagnostic car scanners on the market aren’t very dependable.

Either they only work on a limited number of car models, don’t pick up on important issues, or simply suffer from bad connectivity which makes them inconsistent and difficult to use.

At BAFX Products we’ve made it our mission to bring you a diagnostic scanner with solid Bluetooth connectivity that works on the broadest range of car models.

Put simply, at this cost it cannot be beat.

Works on Most Car Models After 1996

While most competitor’s products only work on a limited selection of vehicles, ours works across a broader range of protocols.

The result is that ours are far more likely to work on your car. And your wife’s car. And your friends’ cars…

Android and Windows Compatible

Who says iOS users get to have all the fun?

This product is specially constructed to work exclusively with Android and Windows devices,

Simply install a suitable third-party app (we recommend ‘Torque Pro’) and get to work!

Can Be Used Internationally

Think this diagnostic scanner can only be used in the good old US of A?

Think again, because it can be put to use on a wide selection of cars in a broad range of countries.

If you want to know if it will work on your car model and in your country then simply send us a message to find out.

• EASILY SCAN, READ AND RESET CHECK ENGINE LIGHTS, ABS(Brake) CODES & MORE - Innova’s 5210 OBD2 scanner empowers the home mechanic with its professional-level functionality. This car diagnostic tool not only reads and clears OBD trouble codes it also displays all vehicle information from when a trouble code was triggered. Works on any foreign or domestic 1996 or newer OBD2 car, light truck, SUV, or hybrid vehicle. Supports English, Spanish or French.
• THE DEVICE IS GREAT BUT THE DATA IS BETTER - Innova has best-in-class data to help you Find the Problem and Fix the Problem. The 5210 code reader comes with the RepairSolutions2 -- a unique app that gets you the information you need to keep your vehicle on the road. Get verified fixes, find and purchase the exact part required for repair, schedule maintenance, receive technical bulletins, recalls, and more.
• LIVE DATA FOR MORE ACCURATE DIAGNOSIS - With the Innova 5210 OBD2 reader you can see your vehicle’s essential information like RPM, speed, and oil temperature in real time to help identify and correct problems. You can also check and test your battery and alternator, so you know whether you need to bring your car to a technician or not.
• KNOW YOUR SMOG CHECK RESULTS BEFORE YOUR STATE DOES - More than just a car check engine light reader, the 5210 OBD2 scan tool also lets you check your emissions status using the red, yellow, and green LEDs to pre-determine whether you’ll be able to pass your smog test. This OBD2 scan tool can also provide trip cycle procedures for completing your smog check.
• DESIGNED & SUPPORTED IN THE USA - Buy with confidence. Our California-based, ASE-Certified Customer Support team is happy to assist you with any questions or troubleshooting six days a week.

Product features

Check Engine

Read and clear the check engine light with a single button.

ABS

Diagnose the braking systems of most 1996 and newer domestic, Asian, and European vehicles.

Battery and Charging System Test

Check to see whether your battery and alternator are in good condition or need replacing.

Live Data

See essential information about your vehicle in real-time (e.g. RPM, oil temp, etc.) to aid in diagnosis.

Smog Check LED Indicators

Find out immediately if your vehicle will pass an emissions test.

Code Severity Levels

Quickly identify if your vehicle needs an immediate fix or if it can wait until you get home to fix it yourself.

Patented All-In-One Display and Hotkeys

With over 20 pieces of information on a single screen, including code definitions, find the problem faster and spend less time scrolling through menus.

Freeze Frame Data

Freeze Frame Data: Display all vehicle information from when a trouble code was triggered.