13 best new obd2 scanners

Product description

Car diagnostic scanner

OS601 is a cost-effective upgraded version of OBDII scanner for determining the cause of the Check Engine Light. Equips with a 2.4-inch color screen and shows live vehicle sensors data in text and graph format. Support all the 10 OBDII test modes, enhanced Mode 6, read&erase codes, code definitions and playback data from the car ECU. It enables you to inspect monitor before Smog check, and switch off the MIL.

How to get started?

Simply plug into the OBD2 port on your car and turn ignition on and you ready to go.

No matter where you are, let this gadget accompanies with you. Let you decide if it's something you can fix or need more advanced help. Save money and time.

Where's the OBDII interface?

It is often under the dash, or under a panel below the handbrake in the center console.

What is OBD-II?

On-board diagnostics (OBD) is an automotive term referring to a vehicle's self-diagnostic and reporting capability. Vehicles produced after 1996 use OBD-II, which is a standardized system that simplifies the process a whole lot. These vehicles all use a common diagnostic connector and a set of universal trouble codes. Though only emission-related codes and data are required to be transmitted through it according to U.S. legislation, most manufacturers have made the OBD-II Data Link Connector the main connector in the vehicle through which all systems are diagnosed and reprogrammed.

At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue.

Why I can't erase the fault code?

Once the monitors are reset, the MIL will either remain out because the DTC was corrected by the proper repair, or it will illuminate because it has again detected the problem.

• Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars (made in 2008 or later), and all OBD II/EOBD/CAN-compliant vehicles.
• Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing; turns off check engine light and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data.
• Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc).
• Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN (Controller Area Network).
• No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. Supports multi-language display (English, German, Spanish, Dutch, Russian).

User questions & answers

Question:	Funciona para un Aveo
Answer:	No se
Question:	Why I can't erase the fault code
Answer:	Thank you for your question. At the most basic level, the check engine light indicates that some sensor, somewhere in your engine, exhaust, or transmission, has provided unexpected data to computer. That could indicate a problem with the system the sensor is responsible for monitoring, a bad sensor, or even a wiring issue. A fault code which provide a jumping off point in the diagnostic process. Then probably the vehicle still has a an issue. Codes only erase if the problem is repaired.
Question:	How can update os601? when do i need to upgrade it
Answer:	Contact the seller for an upgrade package. The upgrade is free. Anytime
Question:	How do you upgrade the software once it is out of date
Answer:	Thank you for your question. In most cases, the upgrade is to fix bugs in the software. In general, a six-month upgrade is sufficient (Because the support for the OBD-II protocol is stable). For other situations of upgrade or diagnosis, you can collect the corresponding model information and send it to us to provide more services. 【How to upgrade?】Connect scan tool with PC through Mini B connector(5 pin) at the bottom of the machine, migrate the upgrade data into it. For more detailed information, please email us via the station and we will send you the upgrade file. May you have a nice day! Warm Regards, Juta Auto

• UPGRADED VERSION of CRP129 +2021 NEW RELEASED OBD2 SCANNER by LAUNCH】: Based on obd2 scanner launch crp129, the launch crp129e obd2 scanner add two more reset service TPMS & Throttle Body Reset. Compared with crp129, crp129e code reader built with large 5" touch HD screen, lifetime free update online, battery voltage test, AutoVIN scan, automatic generate vehicle health report diagnostic report, data print via email share, google search DTC online.
• 【FOUR SYSTEMS DIAGNOSTIC + LIVE DATA IN GRAPHING + DATA RECORD AND PLAYBACK】: Launch crp129e diagnostic tool read and reset Engine, Transmission, ABS and SRS system, turn off the warning light related. Live data in graphing, record the live data stream for up to 10, simultaneous, PID's. Auto record diagnostic data, recorded data can be played back in text format and graph format. Playback supports two graphs (independent) or 4 PID's graphed.
• 【5 RESET SERVICE + BATTERY VOLTAGE TEST + FULL OBD2 MODES TEST +HEALTH REPORT PRINT】: This scan tool can do Oil Reset, Steering Angle Calibration, Electronic Parking Brake,TPMS Reset, Throttle Position Reset, performs real-time battery monitoring/graphing . Reset DTC, I/M Readiness Status,O2 Sensor Test, EVAP Test etc. ALL diagnostic data can be record and generate to diagnostic report which can be shared to email then print on computer.
• 【LIFETIME FREE UPDATE ONLINE + WORK ON 57 VEHICLE BRANDS + 9 LANGUAGES SUPPORTED】: Launch crp129e diagnostic scan tool works on most vehicles after 1996 compliant with OBD2 protocols , more than 57 brands and over 10000+ cars, muti languages support English, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean. Launch crp129e code reader support lifetime free update online by connecting wifi, it keep you can use the newest software all the time.
• 【 Youtube influencer Mechanic Strongly Recommend Automotive Tool 】:KINGBOLEN provides 5 YRS Warranty for any quality problem with a replacement or refund !!!! Choose launch crp129e, more great functions waiting for you. This scanner fits for Technician , advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual
• 🚩🚩Buy from seller [kingbolen] at price $226.88 by Clicking the coupon $12 ( ps .Contact seller “kingbolen” to get extra Gift)

Product features

LAUNCH CRP129E OBD2 SCANNER Check Engine/Transmission /ABS/SRS Fault Codes + 5 Reset Functions + OBD2 Full Test

1. Transmission system: Read and clear codes and view live data in transmission systems, keeps the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.
2. Anti-Lock Braking System (ABS system): Read and clear DTCs data flow in the ABS system. Performs various tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.
3. Supplemental Restraint System (SRS System): Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.Read and clear fault code in SRS (Airbag) system and turn off warning light of airbag for making sure engine work properly and safely.
4. Engine System: The crp129e diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.

LAUNCH CRP129E Support 5 Reset Service, which is very useful for mechanic.

• [Oil Lamp Reset function]: this obd2 scanner allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil, clear the oil light .
• [Steering Angle Calibration]: crp129e code reader helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration, and turn off steering wheel warning light.
• [Electronic Parking Brake Reset]: Reset the brake pad after the repairs in electronic parking brake system are done. It is important in the maintenance of electronic braking systemrsquos safety and efficiency when replace brake pad or motor.
• [TPMS Reset]: the upgrade scanner of crp129 launch crp129e looks up the tire sensor IDs from the vehicle’s ECU, and performs TPMS sensor relearn procedures after tire sensors are replaced.
• [Throttle Position Reset]: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount ofair entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensorcommunicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

LAUNCH CRP129E CAR CODE READER

Live Data Stream Analyse in Graph

• The scan tool crp129e shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.
• Data recording functionality is amazing, customer can record the live data stream for up to 10, simultaneous, PID's. Once these have been recorded they can be played back in text format and/or graph format. Playback supports two graphs (independent) or 4 PID's graphed (combined). Playback timeline can be scrolled, paused, viewed, etc. There's quite a bit of power in the graphing.

Diagnostic Reprot Share and Print

• Launch crp129e obd2 scanner support auto generate and store vehicle diagnostic report which can let your mechanic know how to do vehicle inspection and maintenance. And the diagnostic report can be shared to email then print.
• The diagnostic report can help you save time to analyse the problem, it is very great for repair shop , mechanics can print out the vehicle report for customer.

1. Oil Reset work for Acura(2007-2014),Audi(1994-2018),Bentley(Up to 2014),BMW(1996-2015),Borgward(Up to 2016),Bugatti(Up to 2014), Citroen(1997-2017),Chrysler/Jeep/Dodge(2007-2017),Daewoo(Up to 2011),Ferrari(Up to 2014),Fiat(Up to 2015),GM(1996-2016),Honda(2004-2014),Hyundai(2014-2015),Jaguar(2006-2017),KIA(2013-2015),Lamborghini(Up to 2014),Lancia(2001-2014),Landrover(Up to 2016),Maserati(Up to 2014),Mazda(2003-2016),Maybach(Up to 2013),Mercedes Benz(1995-2016),MINI(2000-2015),Mitsubishi(2006-2015),Opel(2002-2017),Peugeot(1997-2016),Proton(Up to 2014),Porsche(2003-2015),Renault(2003-2015),Rolls-Royce(Up to 2010),Romeo(1997-2014),SAAB(2005-2012),SEAT(1993-2016),Skoda(1996-2018),Smart(Up to 2013),Subaru(2008-2012),Suzuki(2007-2016),Vauxhall(2002-2014),Volvo(1992-2017),VW(1989-2017)
2. EPB Reset work for Acura(2007-2014),Audi(1994-2018),Bentley(up to 2014),BMW(2002-2015),Borgward(up to 2016),Bugatti(up to 2014),Chrysler/Jeep/Dodge(2014-2018), Citroen(2006-2016),Daewoo(Up to 2011),Ferrari(Up to 2014),Fiat(1999-2014),Ford(2002-2016),GM(2009-2017),Honda(2004-2014),Hyundai(2012-2015),Jaguar(2002-2014),KIA(2011-2015),Lancia(2003-2014),Landrover(2005-2016),Lexus(2007-2015), Maserati(Up to 2014),Maybach(Up to 2014),Mercedes Benz(Up to 2014),MINI(2004-2015),Opel(2012-2017),Peugeot(Up to 2012),Porsche(2009-2015),Renault(2001-2015),Rolls-Royce(Up to 2010),Romeo(2001-2014),SAAB(2010-2012),Scion(Up to 2015),SEAT(1993-2016),Skoda(1993-2018),Vauxhall(2012-2015),Volvo(2007-2017),VW(1996-2017)
3. SAS Reset work for
   Acura(1996-2014),Audi(1994-2018),BMW(1995-2015),Chrysler/Jeep/Dodge(2005-2018),Citroen(1999-2017),Dacia(2004-2008),Deawoo(Up to 2011),Daihatsu(2000-2010),Ferrari(Up to 2014),Fiat(1999-2014),Ford(2006-2014),GM(2007-2017),Honda(2007-2014),Hyundai(2005-2015),Infiniti(2008-2017),Jaguar(Up to 2017),KIA(2006-2015),Lancia(1999-2014),Landrover(Up to 2016),Lexus(Up to 2015),Maserati(Up to 2014),Maybach(Up to 2013),Mazda(2006-2013),Mercedes Benz(1997-2014),MINI(2000-2015),Mitsubishi(2006-2015),Nissan(2002-2018),Opel(2004-2014),Peugeot(1995-2016),Porsche(2005-2015),Renault(2002-2015),Romeo(1997-2014),Scion(2008-2015),SEAT(1993-2016),Suzuki(Up to 2016),Skoda(1993-2018),Smart(Up to 2013),Subaru(2008-2012),Toyota(2004- to 2015),Vauxhall(2004-2014),Volvo(1999-2017),VW(1997-2017)
4. TPMS Reset work for Acura(2007-2014),Audi(1992-2014),BMW(2003-2015),Citroen(2004-2012),Chrysler/Jeep(2006-2017),Ferrari(Up to 2014),fIAT(2003-2010),Ford(1996-2016),Suzuki(2005-2013),Opel(2010),Hyundai(2007-2015),Honda(2007-2014),Infiniti(1995-2015),GM(2013-2017),Jaguar(2004-2015),KIA(2006-2016),Lancia(2002-2014),Landrover(2006-2014),Lexus(2006-2015),Maserati(Up to 2009),Mazda(2000-2016),Mercedes Benz(1995-2014),Mitsubishi(2007-2015),MINI(2004-2015),Nissan(1995-2015),Peugeot(1995-2010),Porsche(2009-2015),Renault(2001-2015),Scion(2007-2015),Seat(2000-2014),Skoda(2006-2011),Smart(Up to 2013),Subaru(2005-2011),Toyota(2004-2015),Volvo(2008-2015),VW(1989-2014)
5. Throttle Body Reset work for Acura(2007-2014),Audi(1994-2018),BMW(1996-2015),Chrysler/Jeep/Dodge(2005-2017),Citroen(1991-2016),Dacia(2004-2015),Daewoo(Up to 2011),Fiat(Up to 2014),Ford(1991-2016),Honda(2003-2014),Hyundai(1998-2015),Infiniti(2005-2014),Jaguar(2006-2014),KIA(1999-2015),Lancia(Up to 2014),Landrover(2002-2014),Lexus(Up to 2014),Maybach(2001-2015),Mercedes Benz(1989-2016),MINI(2000-2015),Mitsubishi(2006-2015),Nissan(1994-2015),Opel(2007-2017),Peugeot(1995-2016),Porsche(2003-2015),Renault(1985-2015),Remeo(Up to 2014),SAAB(2005-2012),SEAT(1993-2016),Skoda(1993-2018),SUZUKI(Up to 2011),Toyota(Up to 2014),Volvo(1999-2017),VW(1996-2017)

Fast AUTO VIN Scan

Auto VIN functions allowing you to quickly figure out Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is especially usefu when you want to know if the manufacturer had ever issued a recall of the vehicle and whether the repairs were made, or retrieve the history report of a used car to know its accidents or repairs.

Battery Voltage Test

Faulty charging system will lead the car can not work, as the upgrade version of launch crp129, launch crp129e add Real-Time Battery Monitoring, allowing you monitor vehicle battery automatically with reliable real-time graph data , determine the battery's health status， help you know the possible battery and the charging system problems in head of time.

DTC Lookup

OBD2 scanner crp129e built in DTC Definition to help you accurately find the root cause of your car.Once you pull a code or DTC , it can link to web sites via Google search when searching for more information on DTCs.

Lifetime Free Update Online

LAUNCH CRP129E can get the newest software by click upgrade via WIFI, which it can keep the scan tool up with the times, help improve the using value. The most important is this scan tool support lifetime free upgraded.

Professional OBD2 Scanner Launch CRP129E - Code Reader for Engine/Transmission /ABS/SRS

LAUNCH CRP129E is upgrade version of launch crp129, it support more vehicle Makers, over 10000+ cars.

1.American Area:

For Jeep,Usaford, General Motors(GM), Dodge,Chrysler,Chevrolet,Opel,Cadillac,Buick,Lincoln,Austford,Acura

2.European Area VW,Volvo,Jaguar,Vauxhall,Fiat,Sprinter,Euroford,Smart,Eobd2,Skoda,Seat,Demo,Saab,Dacia,Renault,Citroen,Mini,Benz,Audi,Landrover,Alfa,Romeo,Lancia,Abarth, Porsche,Peugeot,Bugatti,Bmw

3.Asian Area :

For Infiniti, Suzuki, Subaru, Hyundai,Toyota,Honda,Tlisuzu,Lexus,Samsung,Daewoo,Nissangtr,Nissan, Mitsubishi,Mazda,Kia,Jpisuzu

• 🎁【Great Gift Idea for Valentine’s Day】: Top preset choice for your father, husband, brother or boyfriend.EVERY CAR OWNER WILL NEED IT! It comes with high-quality case with rugged and handy design.Get NT644 Elite full system diagnostic scanner and give your lover a surprise!
• 🏆【Full Systems Diagnostics】+【2020 New Version &Latest Software】+【19 Special Service Functions】+【10 OBDII Functions】 FOXWELL NT644 elite car scanner is upgraded version of FOXWELL NT624 elite automotive scanner, which can not only perform fast diagnosis on all electronic control modules for 60+ car makes, but also supports 19 commonly required service and 10 OBDII features. The automotive scanner diagnostic tool provides workshops, technicians and enthusiasts alike unbeatable value.
• 🏆【All Systems Diagnostics for Over 60 Car Makes】: NT644 elite code scanner car diagnostic tool works on over 60 car makes and 10000 model, READ DTCs to locate the fault origins; CLEAR DTCs to turn off MIL (check engine light) after repairs; READ VEHICLE INFORMATION to determine the tested control unit; READ LIVE DATA (graphic mode supported) for deep analysis for all vehicle systems, such as ABS, SRS, Transmission, HAVC, Emission system, Wiper system, Body, Power strain, Chassis, and etc.
• 🏆【19 Frequently-used Maintenance Service Functions】: This full system diagnostic scanner contains 19 most commonly used maintenance functions: Oil light reset, DPF, TPS, TPMS, BRT, ABS Bleeding, gear learn, Injector, CVT,A/F adjust, clutch adaption, PRIME fuel pump, seat match, turbo, windowsdoor and language change.
• 🏆【10 OBDII Functions】: This enhanced automotive diagnostic tool is compatible with all OBD II/EOBD car protocols and all 10 obd test modes includes read error codes, clear DTC, Freeze frame, live data, O2 monitor test, on-board monitor test, I/M readiness , DTC lookup and vehicle information.

Product features

FOXWELL NT644 Elite---Full System Diagnostic Scanner with 19 Service Reset & 10 OBDII functions

Consider to buy another scanner for Chrysler after having a Ford or GM scan tool?

Have idea of purchasing a maintenance/ service reset tool after having a diagnostic device?

Tired of paying and installing individual software one by one ?

Want to get a device with all softwares ready and use directly by just connecting to cars?

Then you need a comphrensive FOXWELL Scanner!!!

Get one NT644 Elite obd2 scanner, to own three different devices. ( Full system car diagnostic tool + obd Code Reader+ Multi maintenance reset tool).Then you don’t need to take time to choose device for different demands.

What’s more, the unique features such as lifetime update, Live Data in Graph & Text, Data playback and print are the highly added values for the FOXWELL car scanner, which makes your repair work easier and more efficient.

The code scanner car diagnostic tool offers a better option for those who pursue a comprehensive diagnostic device. Obtaining one NT644 Elite automotive scanner diagnostic tool will satisfy all your requirements.Undoubtedly, it will bring a great user experience for technicians, mechanics, workshops and repair garage.

19 maintenance reset features

Equipped with multiple service features, This diagnostic scan tool allows you to deal with each maintenance reset yourself within few minutes after finishing the diagnostic process.

1. Oil Service Reset: Turn off the oil light, and reset the service mileage.

2. EPB(Electronic Parking Brake): perform the service and maintenance of brake systems,

3. ABS Bleeding(Anti－lock Braking System): keep the tires from locking up immediately when there are brakes.

（A newer version for abs bleeding is available. You can update your scanner to get it if the current version doesn't meet your expectation.）

4. TPMS（Tire Pressure Monitoring System）：check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires or TPM sensors are replaced or tires are rotated.

5. Diesel- Particulate Filter system: perform the diesel filter cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed, the DPF light automatically goes off.

6. SAS（Steering Angle Sensor Calibration): helps clear the fault steering angle sensor memories and perform calibration of Steering Angle Sensor.

7. TPA/TPS: It is primarily used to monitor the throttle position within an inner combustion engine.

8. CVT: to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced

9. Gear learn: Crankshaft position sensor adaptive learning.

10. BRT, Battery Replacement: lets you to new battery validated, how to clear faults from the dashboard and display.

11. Injector Coding: reset and match the date after injector is replaced.

……There are a lot more functions waiting for you to explore. Please kindly note that compatibility may vary from specific year and model for the special function. If you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

Powerful Full System Diagnostic Scanner

Providing fast and easy scanning for all systems, the code readers & scan tools is capable of reading and clearing codes, retrieving ECU information and viewing live data for all electronic control modules,which mainly consist of the following Drive System, Chassis System, Body System, Electrical system.

1. Drive system: Engine, Transmission, Battery Energy, All wheel, Transfer case, Electrical Machine Electronics, Diesel Fuel Pump, Gear, and more...

2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more...

3. BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more...

4. Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information / entertainment system...

In addtion, the foxwell scanner is compatible with a broad variety of vehicle coverage, the diagnostic scanner supports most cars, SUVs, minivans, light-duty trucks sold worldwide with the year differing from 1996 to 2020.

Warm Tips: Please note, the supported car system will vary from pecific year and model, and it is NOT a bidirectional scanner.

Wide Coverage with 60+ Car Makes

America: Chrysler, Ford, GM,

Europe: Abarth, Alfa-Romeo, Audi, Aston Martin, Bentley, BMW, Bugatti, Citroen, Dacia, Fordeu, Fiat, Ferrari, Jaguar, Lancia, Land Rover, Lamborghini, Maserati, Maybach, Mercedes Benz, Mini, Opel, Peugeot, Renault, Rolls-royce, Porsche, Saab, Samsung, Seat, Skoda, Smart, Vauxhall, Volvo, VW, VW_CV.

Asia: Acura, Daewoo, Daihatsu, Honda, Hyundai, Hyundai_CV, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Ssang Yong, Scion, Subaru, Suzuki, Toyota

China: Baicmotor, brilbmw, Changan, fordchina, mazdachina

Notice: There are lots of vehicles under each car brand and the compatibility for each vehicle will differ. You can confirm it before the purchase.

Please kindly note, if you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

Full OBDII Diagnosis Test Modes

Equipped with full diagnostic functions for OBDII/EOBD, this scan tools and diagnostic tools is capable of reading codes, clearing codes, viewing live data and freeze frame, displaying I/M Readiness, On-BOARD Monitor test, O2 monitor test,vehicle information , component test and DTC lookup.

• Read and Clear the fault codes, turn-off Malfunction Indicator Light (MIL)
• Displays Freeze Frame data
• Displays Oxygen Sensor test results
• Display I/M readiness status.(Non-continuously Monitored Systems test )
• Show Live Data in graph such as engine RPM, temperatures, ignition advance, speed & etc.
• Request On-Board Monitoring test results for specific monitored systems
• Built-in DTC lookup library with cause analysis
• Request Vehicle Information
• Checking system status & DTC Lookup
• Component test& Modules present

Live Data in Text & Graph

The automotive scanner diagnostic tool will show you real-time data in text and graph like engine speed, engine coolant temperature, fuel system status, short term fuel trim & etc.

Data Playback and Print

The FOXWELL obd2 scanner allows you to review and analyze diagnostic trouble codes data, Freeze Frame and Data Stream for later vehicle issues check and troubleshooting.

In addition, the diagnostic report can also be printed via PC.

Built-in DTC Library

With the DTC Lookup feature, the definitions of fault codes will be shown on the diagnostic car code reader, which will save your time and energy to check it online.

Protective Carrying Case

Any order will come with a original FOXWELL protection carrying case, which will prevent your scanner from being damaged whether you place it in a trunk, toolbox, or garage.

Do Diagnostic on your car like a PRO

Notice:

About Update:

• NT644 Elite car scanner can be used out of box and you don't need to update it before the use.
• If you want to update to get newer version later, please kindly refer to the update instruction or check the update video on the product page.
• If the storage of the memory card is not enough for newer version, please kindly delete/uninstall old version or some software you won't use.
• Mac system will NOT be supported for update. Only windows system will be compatible.

About Compatibility:

• There are lots of vehicles under each car brand and the compatibility for each vehicle will differ. You can confirm it before the purchase.
• Regarding service reset functions, please kindly note that compatibility may vary from specific year and model.
• A newer version for abs bleeding is available. You can update your scanner to get it if the current version doesn't meet your expectation.
• AUTOVIN function will work for 99% vehicles.If it fails to auto detect, please kindly input it manually.
• Please kindly note, if you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

Product description

This is your opportunity to purchase Brand New iCarsoft FD-II Diagnostic & Code Reset Tool. Will work on 1997-2016 OBDII FORD and HOLDEN Models (see list below). This is the BEST diagnostic tool on the market for these cars world-wide. Nothing else even comes close! We have sold hundreds of this tool World-Wide with Great reviews!! Comes with an unbeatable 1-Year Quality Manufacturer Quality Warranty. This is a must-have device for all your code scanner, diagnostic, fault reset needs!! With its great presentation and quality of design, it would make a great gift. Device is Easy to use and Simply plugs into your vehicle's OBDII diagnostic port. Comes brand new with: Original packaging, Storage Bag, Adapter Cable to your computer, and Printed Instructions Guide. With this professional grade tool you can save that dreaded trip to the dealership, just to be charged a $100/hour+ 'diagnostic service fee'. Know what is wrong with your car prior to a visit to your mechanic, and possibly fix the problem easily yourself. You can clear faults, air suspension & audio system with a simple press of a button! This is a professional grade, quality tool and comes with 24 hour international product support and online updatability. If you have a question please contact our customer support. We are happy to help! All International Buyers Welcome.

• Sold and Distributed by GERMAN AUDIO TECH
• Brand New! Authentic iCARSOFT device. Ready to use Out-of-the-box!
• FD II is a professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 4” TFT LCD and unique diagnostic software,it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, J1850 etc. It enable technicians to accurately diagnose complex problems.
• Feature: FD II can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Read Data Stream Full ECU Diagnosis Applies to the entire models of FD equipped with OBDII-16 DLC Easy To Use With Metal Dome Keys Oil Light/Service Reset:Support service lamp reset, Brake pad reset function, Steering angle sensor calibration etc.
• EPB:Opens and closes the brake pads,Reads and clears EPB/SBC trouble codes, Turns off the ECU and brake warning light,Diagnoses EPB/SBC caliper functionality, Resets the brake pad thickness service etc. ABS/AIRBAG:Diagnoses ABS/ SRS system codes, Reads/clears codes of ABS/SRS system and turns off ABS/SRS warning light, Performs bi-directional tests such as cycling the ABS solenoids, Retrieves ABS/SRS ECU information etc.

User questions & answers

Question:	work on 1995 e350 abs system
Answer:	No
Question:	Can this be used to reset the battery monitoring system on a 2016 ford fusion
Answer:	Yes, it will work on Buicks, but I found out on a 2000 LeSabre, there isn't any bi-directional support for controlling the power windows, door locks, power mirrors or heated seats. Also, for these functions, you can not see the status of the switches. I sent an email to tech support and asked them to include this added coverage into the next update. I got a reply back with an incident number showing where he forwarded the email to their engineering support.
Question:	Will this scan tool work on a 2014 f150 ecoboost and will it work on a 2008 ford taurus by resetting the transmission shifting
Answer:	Easy answer is no. Will pull up codes for car without being connected to the internet. Internet connectivity required for updates and auxiliary features.
Question:	Will it help diagnose/reset the pats (passive anti theft) system on a ford ranger
Answer:	I have no idea nor an Audi.

• ➤【UPGRADED BLUETOOTH OBD2 SCANNER】: Nexpow LATEST Bluetooth 5. 0 technology, With Bluetooth 5.0 chip installed, Bluetooth has a better performance than the Bluetooth 4.0 in terms of wider transmission distance, faster data rate, and lower power consumption. Ensure your great experience with fast, stable and efficient transmission.
• ➤【Support IOS and Android】OBD2 scanner bluetooth with support for extensive third-party apps (such as OBD Scanner, OBD Car Doctor, Torque Pro, Car Scanner ELM OBD2) can turn your iPhone, iPad or Android phone/tablet into a sophisticated car scan tool.
• ➤【Necessary Tester】Access a whole new world of information about your vehicle directly on your phone, tablet or PC. Read diagnostic trouble codes and freeze frame data, reset check engine light, prepare smog test, view real-time sensor readings, create customized dashboard and estimate fuel economy.
• ➤【 Key Point】Don't just read vehicle malfunction codes and give you code definitions, but more importantly informs you what the possible problems are with your vehicle, even if you know absolutely nothing about cars. We are here to help you know the car troubles and clear the error code for saving money, read engine diagnostic trouble codes, reset check engine light, and check if your vehicle is ready for SMOG inspection. So the understandable fault code definition is important for you.
• "➤【Unique design and You get】OBD2 car code reader equipped with small lights, Easy to plug in & unplug, and won't obstruct legroom. WARRANTY - 100% money-back guarantee, 1-year replacement with professional customer service. "

User questions & answers

Question:	Does it work with 2019 bmw x4 (g
Answer:	As far as I know it works in any vehicle, choose an App that supports your vehicle with advanced diagnostics for best results. I use OBD Fusion
Question:	How can I contact support, it's not working
Answer:	You can check the manual, which has a way to contact us, or you can send us an Amazon station letter.
Question:	Will this adapter work with the carista app on android
Answer:	I found it compatible with any android apps..However ..my older phone ..works better with a different app than my new one.so try two ,dump the one thats glitchy..experiment with apps ( some are too many adds).The tool is like a fork, if you dont like the food change restaurants.
Question:	Will this scan my 99 powerstroke
Answer:	As long as your vehicle is OBD 2 compliant, the device will work with it.

Product features

Read, erase and display code description problems

Turn off the MIL (signal Check Engine)

Download data to external media in a variety of formats for later printing

Record various parameters, display graphics in real-time, and more.

Display Real-Time sensor data, including:

• Engine RPM • Coolant Temperature • Momentum

• Momentum • Engine Load • Oil Pressure

• Oil Pressure • Throttle Position • Calculated Load Value

• Fuel System Status • Vehicle Speed • Short and Long Term Fuel Trim

• Intake Manifold Pressure • Timing Advance • Intake Air Temperature

• Air Flow Rate • Absolute Throttle Position

• Oxygen Sensor Voltages/Associated Short Term Fuel Trims

• Fuel System Status • Fuel Pressure

Choose Nexpow Products - we won’t let you down.

1，Nexpow LATEST Bluetooth 5. 0 technology, With Bluetooth 5.0 chip installed, Bluetooth has a better performance than Bluetooth 4.0 in terms of wider transmission distance, faster data rate, and lower power consumption.

2， Support IOS and Android.

OBD2 scanner Bluetooth with support for extensive third-party apps (such as OBD Scanner, OBD Car Doctor, Torque Pro, Car Scanner ELM OBD2) can turn your iPhone, iPad or Android phone/tablet into a sophisticated car scan tool.

Compatibility

Recommended iOS App: OBD scanner - OBD scanner is an app for your car. It turns your iPhone/iPad/iPod into an advanced display for your engine data. Want to know why the check engine light keeps going on? Check it with OBD scanner.

Recommended Free Android App: Torque Pro - Torque is an OBD II performance and diagnostic tool for any device that runs the Android operating system. It will allow you to access the many sensors within your vehicles Engine Management System, as well as allow you to view and clear trouble codes.

Friendly USA based support

Flashing warning lights in your car can be a real headache. Every DIY mechanic out there wants to discover what’s behind that blinking orange mystery, and understandably so.

It’s your car after all, and not finding the cause can create big problems. It can make mechanical issues worsen, cost you serious money when it’s time to fix things up, or even cause an accident…

This wireless diagnostic car scanner is here to take the worry out of warning lights. Helping you understand the cause of your car’s warning signals, this scanner will identify your car’s problem - quickly and simply.

Vehicle Coverage:

Works on Most Car Models After 1996

While most competitor’s products only work on a limited selection of vehicles, ours works across a broader range of protocols.

How to use OBDII?

For iphone/iPad:

1. Keep the key in the LOCK, plug the OBDII adapter to the car OBD II port

2. Download the app: Scan the QR code on the box or download on Apple Store (Car scanner-free app, Auto Doctor, OBD Fusion, or Auto Doctor)

3. Start the vehicle and enable Bluetooth of your iPhone/iPad (*no need to match bluetooth with OBDII )

4. Open the app, choose bluetooth for connection type, and select Viecar BLE as the Bluetooth device.

5. After connecting to Bluetooth, you can add dashboards according to your needs. OBDII will read data and diagnose vehicles for you

How to use OBDII?

For Android:

1. Keep the key in the LOCK , plug the OBDII adapter to the car OBD II port

2. Download the app: Scan the QR code on the box or download it on Google Play Store (Torque, Auto Doctor or Dashcommand)

3. Start the vehicle, enable bluetooth of your android, and pair with OBDII. Pairing code is 1234 or no need to pass word

4. Open the app and choose OBDII as the Bluetooth device to connect.

5. After connecting to Bluetooth, you can add a dashboard according to your needs, OBDII will read data and diagnose vehicles for you

• 🚗【UPGRADED VERSION of CRP123 +2021 NEWEST VERSION OBD2 SCANNER】Compared with crp123, crp123x obd2 scanner built with large 5" touch HD screen, Lifetime Free One-Click WIFI Update, keep you can use the newest software all time. battery voltage test, AUTO VIN Scan, Automatic Generate Vehicle Health Report all data Print via Email Share, Fast 7.0 Android, 16GB Memory, 6100mAh Rechargeable Battery, Online Google Search, 4 in1 Graphing Parameter for 4 Main Systems.
• 🚗【FOUR SYSTEMS DIAGNOSTIC + FULL OBDII FUNCTIONS+10+ LANGUAGES SUPPORTED】The diagnostic tool comprehensively accesses the main ECU’s for Engine, Transmission, ABS, and Airbag system, reading and erasing code, live data stream, and turning off the system warning lights. Supports performing standard OBD/EOBD diagnostics as Live Data Graphing, Vehicle Information, I/M readiness, DTC Lookup, etc. 💡The diagnostic scanner will help users avoid blind maintenance, saving money and time.
• 🚗【OVER 10000+ VEHICLE MODELS & ONE-CLICK WI-FI LIFETIME FREE UPDATE】One-click free update via Wi-Fi, fixed bugs, and Upgrade new make up to 2020 models. This scan tool works on most 1996 and newer OBDII Compliant vehicles, covering Asian, European, American and Malaysia, India, Iran car brands. Over 57 car brands, Cover OBD1/OBD2/EOBD/JOBD vehicle, including SUVs, minivans, 12v light-duty trucks.⚠️Note: For 4 systems diagnostics, the automotive scanner works better with cars in 2006 or later.
• 🚗【AUTOVIN+ BATTERY VOLTAGE TEST + HEALTH REPORT RECORD PLAYBACK and PRIN】The diagnostic scanner feature the latest VIN-based Auto VIN technology that can identify vehicle make, model, and year information to shorten the vehicle navigation process. Battery Voltage service monitors real-time battery voltage of 12V vehicles in graphical. ALL diagnostic data can be recorded and generate into diagnostic reports which can be shared to email then print on a computer.
• 🚗【5-YEAR WARRANTY DIAGNOSTIC TOOL + ONE TO ONE TECHNICAL FEEDBACK AND SUPPORT】Use the” FEEDBACK” feature, LAUNCH Engineer will provide professional solutions for your issues in time. 60-month warranty for any quality problems. please contact us for the support! This code reader fits for Technician, advance DIY, auto repair shop, automotive engineer, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechan.

Product features

2020 Newest Version-LAUNCH CRP123X OBD2 Scanner for ENGINE /ABS /SRS /TRANSMISSION

LAUNCH CRP123X is a professional OBD2 scanner designed to make work easier for mechanics performing engine, AT, ABS and airbag diagnostics.

• Engine/Transmission /ABS/SRS Systems; Support for all 10 modes of OBD2
• Fast Android 7.0 Operating System; Crisp 5.0-inch Touch Screen Display (720P)
• Auto VIN Scan; Large 16GB Internal Storage; Up to 57 car brands
• 6100mAh built-in Rechargeable Battery; Real-time vehicle battery monitoring and graphing.
• 2 operating methods: Touchscreen or Button; One-touch Wi-Fi Update Service that is Free to access for a Lifetime
• 4 in 1 live data graph; Read and display live PCM data streams;
• Data Stream Record and Playback, Automatic Vehicle Health Diagnostic Report
• 10 languages: English, Spanish, French, German, Italian, Russian, Polish, Japanese, and Korean.
• 5 Years service; Online Feedback

Please Note: if you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info to LaunchDirect, the issue maybe can be fixed via software or hardware upgrade.

Check ABS Codes

The diagnostic tool CRP123X is available for accessing and performing diagnostics on Anti-lock Brake Systems respectively. Check the trouble codes and view live data stream to figure out the issues that caused the ABS warning light, and turn off the MIL after maintenance and repair.

SRS MIL Turn-off

OBD2 scan tool supports performing Supplemental Restraint System (SRS) diagnostics for most domestic and import vehicles. Through reading codes, displaying codes definition, plus checking the information in Built-in DTC library, you’re able to quickly and effectively solve automotive issues within the system.

Engine Diagnostics

Read and erase check engine light codes with clicks on the screen on most 1996 and newer OBD2-compliant vehicles. Live Data allows you to view the vehicle sensor, switch and relay inputs in real time, while the engine is running. Live Data information helps pinpoint the problem components for a faster diagnosis.

Check Transmission

The diagnostic scanner is an entry-level automatic transmission service tool that supports reading/erasing codes, viewing live data and turning off the warning light in the transmission system. It’s a fast, low-cost, and precise service solution for AT issues and you can perform system scanning and get diagnostic results in seconds.

Helpful Diagnostic Report

The obd2 scanner will automatically generate and store a basic diagnosis report on the vehicle as a reference for vehicle inspection and maintenance. The vehicle operating data provided in this report are the static data, you can share and print it by email for technical assistance.

Real-time Voltage Monitoring

To faster solve your problems during vehicle diagnosing and bring you better services, the diagnostic scanner offers the add-on features of real-time vehicle battery voltage monitoring. With graphic displays, you can effortlessly figure out if your battery is within the normal range.

Quick VIN Identification

The CRP123X is an easy-to-use scanner aiming at helping you solve automotive issues quickly and accurately. In addition to manually selecting the vehicle information like year, make, model and VIN, you can quickly access the system via AutoDetect for VIN acquisition.

Lifetime Free Updates

The LAUNCH CRP123X is an Android-based obd2 scanner and supports lifetime free updates through Wi-Fi for more vehicle coverage and bug fixes. You’ll get a notification if any diagnostic software update is available, and you can easily update it with clicks. Never go to search and check for updates anymore.

Full OBD2 Function

Providing full 10 test modes of OBD2 diagnostics with multilingual menu display and built-in DTC Lookup, the CRP123X is an inexpensive scan tool to diagnose and fix problems on OBD2-compliant vehicles.

Wide Suitable Vehicles

The code reader has an expanded coverage for more than 57 suitable vehicle makes to access the engine, AT, ABS and airbag system troubleshooting the trouble codes and warning lights.

• 🎁【Great Gift Idea for Valentine’s Day】: Top preset choice for your father, husband, brother or boyfriend.EVERY CAR OWNER WILL NEED IT! It comes with high-quality case with rugged and handy design.Get NT604 Elite car diagnostic scanner and give your lover a surprise!
• 🎁🎁【FREE12V 24V Car Battery Tester】Buy NT604 Elite get FREE car battery tester. Click “Extra Saving” under price and take both to your cart and you will get NT604 Elite and one free car battery tester.
• 🎄【Easy to Use--Work out of box】+【FOXWELL 2021 New Version】 FOXWELL NT604 Elite code readers &scan tools is the 2021 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite obd2 scanner tools comes with latest software, which can be used out of box. No need to waste time to download the software first.
• 🎄【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell obd2 scanner will help you do a thorough scanning and detection for your lovely cars and pinpoint the problem for you, which saves time and money for you. It will turn off the warning light for you after you fix the problem, making you to know more about your cars and do your own repair.
• 🎄【2 in 1 Diagnostic Scanner】Compared with those OBDII code reader (50-100 USD), NT604 Elite car diagnostic tool not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an obd code reader, you can use it to check if your car is ready for annual emission test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
• 🎄【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite obd2 scanner abs srs will allows you to get your VIN and vehicle info rapidly, no need to take time to find your VIN and input one by one. What’s more, the NT604 Elite obd2 transmission scanner supports 60+ car makes from worldwide (America/Asia/Europe),which are all free and you don’t need to pay extra software fee.
• 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime free update】Almost all same price-level srs code reader only offers plastic bag to hold on the scanner.However, NT604 Elite car diagnostic scanner is equipped with solid protective case, preventing your scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
• 👍【100% Satisfaction】Your satisfaction is our top priority. We take full ownership and responsibility for quality of our product. Any problems, kindly forward us and we will do our best to solve your problem quickly and efficiently.

Product features

FOXWELL NT604 Elite-Enhanced 4 system Diagnostic Scanner and OBDII Code Reader

Have you encounter the following issues before?:

It's far to take your car to auto parts store but I want to figure out what's wrong with your car...

I fixed the issue of my car but check engine light/ abs/srs/transmission warning light stays on?

I had an OBDII code reader and around 50-100 USD, and found it's limited when you want to diagnose other systems...

I bought similar diagnostic tool before, it only come with plastic bag and I had to bought another solid box to hold it.

All these problems can be solved perfectly with the arrival of FOXWELL NT604 Elite diagnostic scan tool:

• Get NT604 Elite obd2 scanner to do your own diagnosis work instead of taking your car to repair shop, which will perform a fast scanning and detection on your car and then troubleshoots your problem in seconds.
• Additionally, NT604 Elite diagnostic scanner will help you turn off the warning light after you fix the issue.
• Get NT604 Elite diagnostic scan tool, to get two scanners: OBDII code reader and obd2 scanner for abs/srs/transmission/check engine
• It has fantastic AUTOVIN feature, which will get your VIN information quickly instead of inputting it one by one.
• NT604 Elite offers solid protective case, which is a good choice for sending as a gift.
• User-Friendly design& Easy to Use: This NT604 Elite abs/srs scanner can be used out of box and no need to finish the update first. No need battery and software installation before the use.

Diagnosis for abs system

ABS is one of the most important systems from chassis control modules, the indicator warning light of which will remind you that there is something wrong with the ABS system. NT604 Elite obd2 scanner abs will figure out the cause for you after performing a comprehensive diagnosis of your vehicle.The abs warning light will stay on after you fix the issue. Then get NT604 Elite abs code reader to help you turn it off.

Diagnosis for srs/airbag system

Air bag/SRS system is located at the body control module, which plays an important role to ensure the driving safety.There are many possibilities if the air bag warning light stays on, including the trouble of airbag, air spring , collision sensor, airbag plug loosening, line open circuit and etc.Therefore, NT604 Elite srs scanner allows you to have a deep analysis and detection for your vehicle via read fault codes. But sometimes the permanent fault codes in this system will still appear and the warning light flashes after the airbag replacement. Then you will need this srs scan tool again to turn the light off.

Diagnosis for check engine system

Many car owners are always confused with the flashing check engine light, which will appear because of various problems, for example, the engine injector should be cleared or engine combustion is not good. If the problem is not solved in time,it will affect the quality of vehicle exhaust and pollute the environment. This check engine scanner diagnostic tool will do you a favour to locate the cause and turn off the check engine light with the problem resolved.

Diagnosis for transmission system

The transmission system is one of the powertrain control modules,but some issues like unworking electronic accessories and broken transmission computer will keep your transmission light flashing. It's hard to locate the accurate error within limited time. Fortunately, this transmission scanner will assist you to have a fast scanning of your vehicle and read the fault code easily, shutting down the waring light within minutes when you finish the repair.

Can Also be an OBDII Code Reader

Besides diagnosis for abs/srs/engine/transmission systems, NT604 Elite diagnostic scan tool also includes all what a popular OBDII scanner has. To own NT604 Elite diagnostic scanner, to save an OBDII code reader for you.

• Reading Codes: Present some diagnostic trouble codes after scanning the vehicle.
• Reseting Codes: Clear the fault codes after doing the repair according to the prompt of the scanner.
• Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
• I/M Readiness Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
• On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
• O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. (Note:If the vehicle uses a controller area network (CAN) protocol to communicate, this function is not supported by vehicle)
• On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
• Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
• Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.1.BRT, Battery Replacement

No Extra Software Fee-Get it all when received

Compared with some other code scanner car diagnostic tool which needs to pay for each vehicle or VIN, NT604 Elite srs code reader is undoubtedly a top choice as it not only includes almost all mainstream car makes from all over the world, but also supports lifetime use.

America: Chrysler, Ford, GM,

Europe: Abarth, Alfa, Aston Martin,Audi, Bentley, BMW, Bugatti, Citroen, Dacia, Ferrari, Fiat,Fordeu, Jaguar,Lamborghini, Lancia, Land Rover, Maserati, Maybach, Mercedes, Mini, Opel, Peugeot,Porsche, Renault, Rolls-royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volkswagen,Volvo.

Asia: Acura, Daewoo, Daihatsu, Fuso,Honda, Hyundai, Hyundai_CV, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion,Ssang Yong,Subaru, Suzuki, Toyota

China: baicmotor,brilbmw,changan, fordchina, mazdachina

The compatibility will vary from different year and model. To confirm it, you can ask Q&A if needed.

Please kindly note, if you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

Read Transmission Temperature

Besides reading ecu info, reading/clearing fault codes, this NT604 Elite car diagnostic scanner is also equipped with an individual menu for live data stream, which will show you transmission temperature in the graph.

Wider Coverage, Better NT604 Elite

Covering more than 60 car makes, this foxwell obd2 scanner will allow you to access to almost all well-known cars, suvs, light-duty trucks from all over the world. While other similar 4 system code scanner can only support 40-50 car brands at the same cost range.

The compatibility will vary from different year and model. To confirm it, you can ask Q&A if needed.

Please kindly note, if you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

No Language Subscription

This automotive scanner and diagnostic tool includes many lanuages like English, French, Spanish, Portuguese, Japanese, Russian,Korean, Sweden and etc, which meets the requirement of some customers asking for spanish. Then you don't need to use google translation again.

Live Data Stream in Graph

The NT604 elite code readers & scan tools will show you real-time data in text and graph like engine speed, engine coolant temperature, fuel system status, short term fuel trim & etc.

Just select the factor you want to display, and then click "graph". The targeted factors will be shown in single graph, multi-gragh and you can merge two graphs together.

Built-in DTC Library

With the DTC Lookup feature, the definitions of fault codes will be shown on the diagnostic scanner, which will save your time and energy to check it online. Click "?" and more detailed description about the DTC will be presente

AUTOVIN

This foxwell all system scanner can automatically identify the vehicle and perform a quick scan, which allows you to quickly match the right updated software that will enhance the diagnostic capabilities and resolve compatibility issues.

Please note, Auto VIN feature is available for 99% cars. If takes long time to get the VIN code automatically, please input the vin manually.

Best NT604 Elite, for Best You!

Any order will come with a original FOXWELL protection carrying case, which will prevent your scanner from being damaged whether you place it in a trunk, toolbox, or garage. What're more, it's the best choice for sending as a gift to the car owners around you.

In the most situation, other kinds of scanners with the similar cost only offer plastic bag,then you have to spend extra 20-30 dollars to choose a suitable case for your scanner. Therefore, if you compare FOXWELL NT604 Elite scan tool with other brands, you can hardly find one that offers this kind of solid carrying case in the same cost range.

About Update:

• NT604 Elite car scanner can be used out of box and you don't need to update it before the use.

About Compatibility:

• Please kindly note, if you encounter incompatibility or defective issues, kindly provide the model, year, VIN of your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

• ➤【2021 NEWEST DIAGNOSTIC TOOL OF LAUNCH CRP SERIES + ONE-CLICK WIFI UPDATE】 LAUNCH CRP909X is the newest elite version of CRP series scan tools. It supports 15 reset functions, all vehicle modules diagnostics and full obd2 functions. It automatically retrieves vehicle VIN for troubleshooting accurately. One-Click update online keep you can always have the latest bug fixes, new vehicles, newly added parameters and functionality at your fingertips.
• ➤【15 RESET FUNCTIONS + AUTO VIN SCAN】 The obd2 diagnostic scanner provides 15 competitive reset services, to access the commonly used maintenance work without complex operation. Details are as follows: Oil Reset / SAS Reset / EPB Reset / BMS Reset / DPF Regeneration / ABS Bleeding / IMMOBILIZER / Sunroof Reset / Suspension Reset / Gearbox Reset / AFS Headlamp Reset / Injector Coding / Gear Learning / TPMS Reset / Throttle Adaptation. With the Auto Autovin Scan, you may easily get the VIN.
• ➤【ALL SYSTEMS DIAGNOSTICS + FULL OBD2 FUNCTIONS】This LAUNCH scan tool can READ VERSION INFORMATION; READ/CLEAR DTCs; READ LIVE DATA (graphic mode supported) for all vehicle systems (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, Tire Pressure Monitoring System etc.). This OBD2 scanner owns 10 modes of obd2 test to make sure any emission-related issues can be easily checked out.
• ➤【SUPPORTS 10000+ COMPATIBLE VEHICLES + AUTO DIAGNOSTIC REPORT】 This diagnostic scan tool LAUNCH CRP909X is compatible with over 57 different vehicle brands and 10000+ cars worldwide which is compatible with OBDII, EOBD and JOBD protocols and also supports cars which made in 2018/2019/2020. Automatic generate vehicle health report diagnostic report, you can store the data to graph, record, and/or playback your vehicle’s parameters from your scan, and print them by email for further analysis.
• ➤【7.1 ANDROID OPERATING SYSTEM + 5YEARS WARRANTY】 This car code reader comes with 7-inch Touchscreen, 6000 mAh battery, real-time battery voltage of 12V vehicles in graphical display. Multilingual support: English, Spanish, French, German, Italian, Russian, Portuguese, Japanese. ✔5 years warranty and 60-day free return service are available. IF YOU HAVE ANY PROBLEM, YOU CAN CONTACT US FREELY VIA OUR AFTER SERVICE EMAIL OR AMAZON MESSAGE.

Product features

15 Commonly-Used Service Reset Functions

LAUNCH CRP909X, which comes with 15 commonly-used service reset functions, makes it possible for beginners or mechanics to perform car maintenances easily and quickly.

• Oil Reset: Close the oil service light and reset service mileage & service interval after replacing the engine oil.
• Throttle Reset: Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
• EPB Reset: Reset the new electronic parking brake for braking wheels safely again.
• BMS Reset: Perform a reset on the vehicle battery for clearing the fault information and re-match the battery.
• Suspension Calibration: adjusts the height of the body.
• SAS Reset: Perform calibration for the Steering Angle Sensor, and clear fault memory.
• DPF Regeneration: Specially works for Diesel Particulate Filter system with DPF regeneration,DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
• ABS Bleeding: The auto bleed procedure is used on brake pump equipped vehicles.
• IMMO Service: Read pin code from vehicle security immo system,mainly used to disable the lost vehicle keys and program a new replacement key fob.
• Injector Coding: Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed.
• Gear Learning: Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
• TPMS Reset: Makes TPMS sensor in displaying sensor IDs from the vehicle’s ECU,inputting TPMS sensor replacement IDs and testing sensors.
• Sunroof Initialization + Gearbox Matching + AFS Headlamp Reset

Full Systems Diagnoses for Enhanced Diagnoses

In addition to 10 modes of OBD2 test, LAUNCH CRP909X diagnostic scan tool also performs well at diagnosing all electronic control systems of the available vehicles. The advanced code reader allows you to detect Engine, ABS, SRS, Transmission, BMS, EPB, SAS, TPMS, Suspension, and other systems, with the following functions:

• Version Information – reads the version information of system mode, VIN, software and ECU.
• Read DTCs – knows what and where the problem is according to the DTC and its definition.
• Clear DTCs – erases the DTCs and turns off the warning lights after code reading and certain repairs.
• Live Data Stream – displays valuable parameters to determine the specific problems accurately.

ALL vehicle systems, including: Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, ....etc.

Over 10000 Compatible Cars

This touchable diagnostic tool supports all systems diagnoses on 54+ different vehicle brands, thousands of models worldwide.

• Europe: Compatible with Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, Lancia, Landrover, Mini, Opel, Peugeot, Porsche, Renault, Euro Ford, Fiat, Abarth, Alfa Romeo, Audi, BMW, Bugatti, Citroen, Dacia, VW, Jaguar, Mercedes,
• Asia: Compatible with Subaru, Suzuki, Toyota, Lexus, Mazda, Mitsubishi, Nissan, Nissangtr, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Acura, Kia, Renault Samsung, Tlisuzu.
• America: Compatible with Lincoln, Dodge, GM, GMSA, Ford, Jeep, Buick, Cadillac, Chrysler, Chevrolet.

Advanced Hardware Configuration

• 7-in LCD Touch Screen;
• 6000 mAh Battery for 10+ Hours Work;
• Operation System: Android 7.1;
• Processor: Powerful Quad-Core Processor

Diagnostic History Function, Recording Every Details of Diagnosis

The Launch CRP909X obd2 scanner makes it convenient for users to view the diagnostic report at any time and quickly resume from the last diagnosis.

• Diagnostic History: This car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch.
• Diagnostic Report: Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your email box (if bound). You can download it, and then print it to share it with others. Note: The first time you use this scanner, you need to set up the default email address for automatically receiving the diagnostic reports.
• Live Data Stream Graphing provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor1 , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it.
• Live Data Stream Record allow you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly.
• Live Data Stream Playback. After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record".
• Live Data Stream Sharing will let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complex problems.

Display Live Data in Value, Graph and Merged

This Launch diagnostic scanner code reader supports 3 display modes for easy data review, allowing you to view various types of parameters in the most suitable way.

• Value – this is the default mode which displays the parameters in texts and shows in list format.
• Graph – displays the parameters in waveform graphs.
• Combine – this option is mostly used in graph merge status for data comparison. In this case, different items are marked in different colors.

Display Real-time Battery Voltage

Once properly connected to the vehicle, the Launch CRP909X is able to perform a check of the vehicle’s battery to ensure the system is operating within acceptable limits.

The Package List:

1* CRP 909X Handset

1*OBDII Diagnostic cable

1*5V DC Charging cable1

1*Power adaptor

1*Quick start Guide

1* User's Manual

Diagnostic Feedback to Optimize the Scanner

This OBD2 scanner allows you to feedback your diagnostic problems to LAUNCH for analysis and troubleshooting. You can submit the detailed failure description to us or view all the diagnostic feedback records. We’ll continuously optimize our products performance and improve our service.

Auto VIN to Save Time

After a successful data connection, the CRP909x can automatically obtain the Vehicle Identification Number (VIN) of the currently identified vehicle. No need to get the VIN from the top left corner on the vehicle’s dashboard or from the driver’s door and manually input the 17-digit code.

One-Click Update with 1-Year Free

This Launch scanner offers 1-year free online update via WIFI to enjoy more functions and better service. By tapping the “Upgrade”, you can enable the Launch CRP909X to keep itself synchronized with the latest version, get wider available vehicle coverage, add more languages, and improve the performance.

• WIDE COMPATIBILITY - Recommended by YouTube Star Scotty Kilmer on his channel. Works on most vehicles sold in the USA with model year of 1996 or newer; Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network); Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese; Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle.
• CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
• ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
• QVGA DISPLAY & NEW UI - AD410 code reader is a greatly enhanced upgrade from more basic diagnostic scan tools. It has a 2. 4" TFT true color (262K) LCD display for clear test results showing. With an easy-to-read UI design, the user can easily access Setup, OBDII Diagnostics, I/M readiness, and DTC Look-up and Review. You don't need to read the manual to know what to do, even for a beginner.
• DIAGNOSTIC REPORTS & UPDATE - The "Review & Print" option can be used to save or print diagnostic reports as needed. ANCEL brand provides life-time free software updates for this unit to fix the latest bugs or add new parameters. Just download the software from the ANCEL website and then follow on-screen instructions to install.

Product features

ANCEL AD410 OBDII Scanner

Where's the OBDII interface?

• The OBD2 port is often under the dash, or under a panel below the handbrake in the centre console.

How to get started?

• Simply plug into the OBD II port on your car and turn the ignition on and you ready to go.

Why I can't erase the fault code?

• The fault causing the fault code to show will need to be repaired first then code can be erased.

NOTE:

• Works on vehicle with 12V battery ONLY
• Must be 16 PIN OBD II protocol

KEY FEATURES

• Reads and clears check engine light codes, both generic and manufacturer-specific, and resets monitor
• Built-in DTC look-up library for manual retrieval and code definition
• I/M Readiness to test misfire, fuel system and Comprehensive component
• Displays all data stream items or selects any item of live data for graphing
• Views freeze frame data and shows vehicle parameters recorded by ECU when an emission-related fault occurs

CODE DEFINITION

There is a built-in up-to-date OBD-II DTC look-up library in this device. Fault codes and their definitions can be found in the library. A 2.4" TFT true color (262K) LCD display is fitted to provide a clear reading of the information contained in it. After a fault code is detected, the definition of the code will be shown by directly clicking the fault code selected.

DATA STREAM

The scan tool lets you view "real-time" Live Data. This information includes values (volts, rpm, temperature, speed etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by the various vehicle sensors, switches and actuators. It supports detailed text display, and you can view all data stream items or select a certain item of live data with a graph.

I/M READINESS

I/M readiness is to test Misfire / Fuel system / Comprehensive component. Quickly monitor emissions readiness check and drive cycle verification. Let you know the comprehensive status of your car's engine system. Help you pass the Smog Check easily."N/A" means Not Available on this vehicle, "INC" means Incomplete or not ready, "OK" means Completed or Monitor Ok.

POWERFUL CPU

Unlike other Cheap and Old versions, ANCEL AD410 scanner goes with a more advanced STM 32-bit CPU has the specialty of high speed, compressed volume and steady performance.

LIFETIME FREE ONLINE UPGRADE

AD410 provides life-time free software update to fix the latest bugs and add newly DTC or parameters. Just download the software from ANCEL website, then follow instructions to update.

Please Note: After the unit is plugged into a computer via a USB cable, the LCD screen will display two vertical bars until the update is complete. The update software supports Windows 7/8/10.

FEEDBACK

Have problems working on your vehicle? Don't worry, just turn the "FEEDBACK" option on in the Settings and then send us the recorded issue file via PC, and our support team will contact you as quickly as we can.

SAVE MONEY AND TIME

Simple and super easy to use, this device is a must-have diagnostic tool for today’s technologically loaded vehicles. It is a car doctor, so to speak, that allows you to identify and troubleshoot any problem with your car engine, so you may try to fix it by yourself or know how much it costs you to have it fixed when a mechanic is involved. That’s time and money saved.

• 1⃣【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
• 2⃣【 Error Fault Code Reader 】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
• 3⃣【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world like ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
• ⃣【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】※Live Data Graphing ,more intuitive to know your vehicle’s problem . ※ Large size Color Screen ;※ Print Function:Print the diagnose result easily; ※ with user manual and register & update tutorial video uploaded in the link by us, you can Look up it anytime by ONE-CLICK.
• 👉👉【We Always Got your BACK ! 】This original Launch scanner is backed up by Launch official after-sale services with 5-year warranty, available 60-days return & replacement policy, and 24/7 thoughtful support. We, the authorized Launch seller, provide you with 2021 newest original Launch CRP123 with reliable quality. ([email protected])

Product features

Engine:

Today’s engines are complex systems, using feedback loops from intake air temperature and flow, manifold absolute pressure, engine coolant temperature, crankshaft and camshaft position, oil pressure, fuel rail pressure, fuel tank pressure, vehicle speed and many other inputs to determine correct air/fuel ratios, camshaft timing, ignition timing and other, critical, operational parameters. The LAUNCH CRP123 OBD2 Scanner speeds diagnosis by providing the user access to critical OBD II standard data as well as extended, manufacturer specific, data on engine, fuel, emissions and performance parameters, at the touch of a button.

Transmission:

Today’s automatic transmissions (A/T), like our engines have evolved into a complex system of mechanical, electrical and control systems interaction. Today’s transmissions provide a wealth of information about the success of up and downshifts, solenoid action (too harsh, too soft), clutch engagement, fluid temperature, fluid level, pressure, and other, critical, operational and diagnostic information. The LAUNCH CRP123 OBD2 Scanner provides the user a detailed view into this critical components operation and function, allowing fast, accurate and complete diagnosis of existing, or potential issues.

ABS:

Like other systems, braking systems have evolved and become more complex, with multiple sensors and actuators operating together to make braking more smooth, consistent and safe for everyone. The LAUNCH CRP123 obd2 scanner allows the user to monitor and diagnose critical ABS systems to ensure that repairs to this critical system are effective, and complete.

SRS:

A well-functioning, always ready, Supplemental Restraint System (SRS) is absolutely critical for occupant and driver safety. Even minor issues might impact the operation, and performance, of the SRS system. The LAUNCH CRP123 obd2 scanner quickly, and efficiently, allows the user to retrieve, read and interpret SRS system issues and monitor SRS system functionality to rapidly diagnose, and repair, the cause of the issue. Once repaired, the CRP123 will allow the code to be cleared and the SRS system to be tested, by the PCM, to ensure that the fixes are complete.

Launch Creader CRP123 Multiple Languages Supported .

Multiple Languages Supported:

• English,French,Spanish,
• Japanese,Portuguese,German,Russian

Thus, if you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.

View Live Data Graphing of Engine/AT/Airbag/ABS System

• 4 Live Data Stream Analyse in 1 Graph: This OBDII diagnostic scanner has big size LCD color screen .it also shows live vehicle sensors data in text,multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters of Engine & AT & Airbag & ABS System.

Free Update ? Yes ! Free Update for Life-long time

You will enjoy smooth updating process (Noted: The scanner device is compatible with Windows7/8/10). Different from limited free update, X431 CRP123 provides you with free update for life time.

crp123 obd2 scanner :Launch CRP123 Packing List:

1 piece* CRP123 Main Unit

1 piece* USB Cable

1 Piece* Main cable

1 piece* Card Reader

1 piece* User Manual – 1 Piece* Carton Box​ – 1 set Car Panel Removal tool (Gift)

crp123 obd2 scanner

HOW TO REGISTER & UPDATE?

Step 1: Go to LAUNCH official website(refer to the "user manual" in the "Technical Specification "section of product webpage) and click Updating Tool Download icon.

Step 2: Download and install the CRP123 update tool and launch the program when installed.

Step 3: You will be prompted to type in the serial # (located on the back of the tool)

Step 4: Hit [Device Upgrade] to enter the register page, type your email info (check the "Register Code" on the device menu "Help--Tool Information" ).

Note: the “User password” is equal to the “Register Code.”

Step 5: Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU.

Step 6: Reopen the CRP update Suite and select the updates you would like to preform or click select all and click Download.

Step 7: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.

• 📣【 FOXWELL NEW GENERATION PROFESSIONAL AUTOMOTIVE SCANNER】Foxwell NT614 Elite code readers & scan tools offers techinicians and enthusiasts an easy and affordable solution to pinpoint troubles of engine, transmission, ABS and airbags on majors American, Asian and European makes. 📢 The oil light reset and EPB Reset service features are big plus. Works on both OBDI and OBDII vehicles including the latest 2018/2019 models, 4.3'' large TFT color screen and portable protective carrying case.
• 🚗【MAINTENANCE 】FOXWELL car scanner provides routine maintenance - Oil light reset and Electronic Park Brake(EPB) Reset help to keep your car running smoothly.EPB Reset for 42 car makes. Oil Light Reset for 49 car makes. Helps you diagnose and calibrate faults in your vehicles accurately and profitably when the warning light is on. It’s a must for mechanic and experienced enthusiast to scan and maintain vehicles.💰 The upgarde version of nt604 elite, Save $200 for your car on maintenancing
• 🔧【DIAGNOSE】Foxwell obd2 scanner ABS/SRS/Engine/Transmission Diagnoses+OBDII, not only performs Full OBD2 functions to read/clear faults, show live sensor data in graph, do your own smog check, Freeze Frame, On-Board monitor, O2 test, etc. But also can diagnose 4 main systems[Engine, TCM, ABS and Airbag(SRS)] to read/erase error codes, display data stream. Besides, allows you to turn off check engine/airbag/abs light, and read TCM temperature, etc.☆ ABS Bleeding/Auto Bleed is not supported☆
• 💬【LIVE DATA + BROAD COMPATIBILITY + AUTOVIN 】The foxwell scanner tool provides live sensor data in text&graph formats to view TWO PIDs simultanously, including crucial PIDs such as Misfire, etc.✶Please note, the data display might be a bit slow.✈Meanwhile, diagnostic scanner works on over 52 brands of American, Asian, and European vehicles, covering cars, light trucks,minivans and SUVs.✈AutoVIN for VIN reading(☞Some models may do not support AutoVIN, please type it in manually).
• 💯【NO CONCERNS】🔩 1-year warranty+100% money back; Any quality problems, please contact us for full hassle-free refund or replacement! 🔩 Lifetime Free Update (windows system only currently) 🔩 13 Languages: English, français, Español, Deutsche, italiano, Português, Magyar, Nederlands, svenska, русский, 한국어, 日本語, ชาวไทย. 🔩 More you can do: Data Print, Data Review, DTC Lookup...Easy to use---Plug and play, can be used out of box and don't need to update it before the use.

Product features

Foxwell NT614 Elite - Enhanced OBD2 Code Reader + Four-System Diagnostic Tool with EPB Reset & Oil Light Reset

What NT614 Elite Code Reader DO for you ?

1. Help you turn off annoying check engine light.
2. Help you erase the fault code.
3. Help you read transmission temperature in live data.
4. Help you save money and time.
5. Help you detect the fault for Engine/ABS/Airbag/Transmission.
6. Help you do the maintenance service : Oil light reset & EPB reset service.
7. Help you scan both OBDI and OBDII vehicles including the latest 2019/2020 models .

What else does NT614 Elite car diagnostic tool HAVE ?

• AUTOVIN : which will get your VIN information quickly instead of inputting it one by one.
• Multilingual : ( English, French, Spanish, German, Italian, Portuguese, Korean, Japanese, Hungarian, Dutch, Swedish, Russian, Thai )
• Solid protective case : It is a good choice for sending as a gift.
• Easy to use - Plug and play : can be used out of box and no need to update first. No need battery and software installation before the use.

4 IN 1 Car Scanner

For ABS (Anti-lock Braking System) Diagnose :

• ABS(Anti lock brakes), a part of vehicle chassis, the indicator warning light of which will remind you that there is some issue with the ABS systems. Read/ clear error code flow in the ABS and turn off the warning light. Retrieves ABS codes to tell you where the problem is with a visual inspection of all brake components. It also performs DTCs data flow in the ABS that allows the user to monitor and diagnose the ABS to ensure that repairs to this vital system are effective and complete.(NOTE: ABS Bleeding/Auto Bleed is not supported.)

For Engine System Diagnose :

• Quickly determine the cause of the Engine System, and turn off the warning light. It also retrieves current, permanent, and pending codes in the vehicle engine system. What's more, your check engine light will be turned off within minutes via clearing the fault codes, helping save your time and energy with the investment to this foxwell scanner.

For SRS (Airbag) Diagnose :

• Airbag is located at the body of your vehicle. Sometimes fault codes in this system will still appear and the warning light flashes after the airbag replacement. Through a deep analysis and detection for your vehicle, Read and clear fault code in SRS (Airbag) , turn off warning light of airbag and read live data in Supplementary Restraint System (airbag) to ensure that it is working correctly and safely.

For Transmission System Diagnose :

• To keep the transmission systems output closely linked to the load and speed, the scanner views live data, reads and clears codes in transmission systems. Retrieving error information from the Automatic Transmission (AT) occurs seamlessly. AT is a kind of automotive transmission that automatically changes gear ratios when the vehicle is in movement thereby relieving the driver from manually shifting the gears.

2 Commonly Maintenance Services

1. Electrical Park Brake (EPB) Reset

EPB Service menu allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted. Some tests display a command to the operator. (Supports 42 Car Makes. )

Actual tests vary by vehicle manufacturer, year, make. Typical special test options include:

--Deactivate/Activate SBC/EPB systems

--Adaptation on Audi A8

--Replace hydraulic brake systems fluid/bleed brake system on Mercedes SBC vehicles

--Perform service reset and service position on BMW EPB vehicles

--Perform activation/service work on Volvo PBM vehicles --Reset memory on EPB vehicles

--Perform brake cable replacement and electric parking brake replacement

--Save and write clutch pedal programming on Renault EPB vehicles --Sensor calibration on Honda EPB vehicles

2. Oil Light Reset

Oil Light Reset menu allows you to reset the service lamps on the instrument cluster. The Service Indicator System is designed to alert the driver when the vehicle is due for a service. Oil service reset methods are determined by the vehicle being tested. What's more, NT614 Elite automotive tools has 3 reset modes(One Button, Manual Reset, Auto Reset) (Supports 48 car makes)

Changing oil is probably the most important part of routine maintenance for any vehicle. An oil change consists of removing old oil from a vehicle's engine and replacing it with fresh oil. The engine oil filter is usually also changed at the same time. NT614 Elite scan tool can reset your oil service to complete this important maintenance.

The compatibility will vary from different year and model. If you encounter incompatibility issues, kindly provide your vehicle info , the issue is likely to be fixed via software or hardware upgrade.

Diagnose in seconds ! OBD2 Scanner Car Code Reader

• Read and Clear the fault codes, turn-off Malfunction Indicator Light (MIL).
• Shows Freeze Frame data.
• Shows Live Data in graph such as engine RPM, temperatures, ignition advance, speed & etc.
• Shows I/M readiness status.(Non-continuously Monitored Systems test ).
• Shows Oxygen Sensor test results.
• Request On-Board Monitoring test results for specific monitored systems.
• Component test & Modules present.
• Request Vehicle Information.
• Checking system status & DTC Lookup.
• Built-in DTC lookup library with cause analysis.
• Identifies cars quickly and easily with one-key VIN reading.
• " ? " Key ( " Help " Key ) - - displays helpful information.

Foxwell NT614 Elite code reader/scan tool is a professional-level four systems diagnostic scan tool. Once you get used to it, the tool will help you save costly mechanic fees by scanning faults codes, including auto transmission codes, obd codes, check engine codes, abs codes, airbag codes to know where and what the problem is in your car/truck. Meanwhile the oil change reset functions and parking brake reset can help directly solve your car issues.

Live Data Stream in Graph

Foxwell NT614 Elite auto diagnostics shows you live sensors data (eg. transmission temperature,engine speed, engine coolant temperature, fuel system status, short term fuel trim ) and provides data graphing with 4.3’’ color screen.

Just select the factor you want to display, and then click "graph". The targeted factors will be shown in single graph, multi-gragh and merge two graphs together.

AutoVin

• Automatic VIN Acquisition
• Manual input VIN

If takes too long to get the VIN code by automatic, press Cancel to stop and input the VIN manually.

How to Update

First, Update is not necessary. If you really need to update. Here are the steps:

1. Visit foxwell official website.

2. Register the website with your email address.

3. Download the update tool-Foxassist.

4. Unzip the application file and follow the instructions to install the application and driver.

5. Launch the Foxassist application and log in with your registered email.

6. Remove the TF card from your NT614 scanner and put it into the card reader and plug it into your computer(windows only, ios is not supported)

7. Open the interface of Foxassist, select Activate and input serial number which in the rear of your NT614 tool.

8. Select Download and choose the car makes you need. (Not all car makes are necessary, please select the car makes you indeedy need. )

9. When the update is completed. You will see a "All software downloads are successfully installed!" message.

Professional Protective Case

The professional-level Foxwell NT614 elite scanner for car has a hard protective carrying case to store it , to be preventive from dust and fall, daily wear and tear, and for long-term use. What's more , it is the best to be a gift.

• ABS/SRS/Engine/Transmission System Scanner: Autel ML629 not only can figure out the emission-related engine problem, but also can get quick access to the Anti-Lock Braking System / Airbag System / Engine / Transmission systems and diagnose these 4 systems’ conditions. It reads codes, clear codes, and read live data to help you turn off the MIL, ABS & SRS warning lights.
• Complete OBD2 Functions: This OBD2/EOBD code reader is compatible with all OBD2-compliant vehicles with full OBD2 functions. It can pinpoint any emission problems of the car engine by the Full OBD2 functions. Read Codes, Erase Codes, I/M Readiness, Live Data, Freeze Frame, O2 Monitor Test, On-Board Monitor Test, Vehicle Information, and Component Test.
• DTC Lookup & Vehicle Information: Designed with a built-in DTC library, this OBD2 scanner provides you with the ability to look up the definition of diagnostic trouble codes. Up to 10000+ codes are available in this DTC electronic dictionary. No need to look up codes on the Internet. In addition, it can identify the car automatically and retrieve the car information (VIN, CIN, and CVN).
• Upgraded Version of ML619 / AL619: As the upgraded version of ML619/AL619, ML629 can read enhanced codes, graph data, and erase codes in Anti-Lock Braking System, Airbag System, Engine, and Transmission system. Being cost-effective with only a small extra budget, this code reader enjoys more benefits with a wider range of vehicle coverage. It supports internet updating via USB and data printing via PC.
• The Newest Version in 2020: As the newest version in 2020, this Autel OBD2 scanner supports most 1996 and newer vehicles (OBDII & CAN) – domestic and import, including some latest models. Free update for lifetime via Mac/Win PC. With a 1-year warranty, 30-day free return & replacement service, and 24-hour customer service, this OBD2 scanner gives you excellent user experience.

Product features

What Are the Functions of MaxiLink ML629

Fasten up your drilling work with the help of this OBDII diagnostic tool Autel ML629, which is perfectly combined all 10 test modes of OBDII functions, DTC LookUp, with the global OBDII coverage for U.S. domestic, Asian and European makes and models. The ABS & SRS scanner can also get access to 4 vital vehicle systems to pinpoint the trouble area precisely.

- For Engine System:

Easily determine the cause of the Engine System, and turn off the warning light. Guide you to find out problems in the engine, check its real-time operating status, for making sure the engine is in the normal condition.

- For Auto Transmission System (ATS):

Read and clear codes and view live data in transmission systems; keep the transmission systems output optimally adapted to the speed and load.

- For Diagnose ABS (Anti-lock Braking System):

Read and clear DTCs data flow in the ABS, and turn off the ABS warning light. It retrieves ABS codes to tell you where the problem is, with a visual inspection of all brake components.

- For SRS (Airbag):

Read and clear fault code in SRS (Supplementary Restraint System) and turn off warning light of airbag for making sure the system work properly and safely.

What Can I Do with OBD2 Test?

As an advanced obd2 scanner, Autel MaxiLINK ML629 serves all 10 OBD2 modes, for most 1996 and newer vehicles (OBDII & CAN):

- Read and erase generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes;

- Effortlessly switch off the annoying Check Engine Light after servicing and repairing;

- Check I/M Readiness to determine if your vehicle finishes the self-test, and passes the State Emission Test;

- View Live Data to focus on any suspicious data, and to analyze the running status;

- Retrieve freeze frame data that records the engine components’ running status when a fault code is detected;

- Analyze O2 Sensor Test result to know the Oxygen content in the exhaust, and make the adjustment for the best air-fuel ratio;

- Access to on-board diagnostic monitoring test results, to determine if some specific components, or the monitors are fine;

- Retrieve vehicle information (VIN, CID and CVN) for accurate diagnosis.

What Does DTC LookUp Offer?

The error codes will pop up with a brief description, so there is no mystery to what it is reading out. Also, you will get impressed by its built-in DTC LookUp library, which means you don’t have to go looking the code up online in a list or database. This will help debug the problem much faster, to help you know what values you are looking for, so as to eliminate hours of research or a visit to the mechanic.

How Is the Compatibility?

A wide range of European, US and Asian vehicles are covered by Autel ML629, including GM, Ford, Mazda, Toyota, Lexus, Scion, Suzuki, Peugeot, Citroen, Fiat, Abarth, Lancia, Alfa, Honda, Acura, Subaru, Nissan, Infiniti, Chrysler, Renault, Dacia, Land Rover, Jaguar, VW, Audi, Bugatti, Skoda, Seat, Bentley, Volvo and Porsche, etc.

What Is I/M Readiness Test?

Another handy feature that ML629 can run is “I/M Readiness” test. The scan tool displays the status of all monitors in your car in addition to any permanent/pending trouble codes, which means it evaluates all the emission systems while showing their real-time status. This will greatly help you know if the car has passed the annual smoke emission test, and avoid the penalty caused by not reaching the car emission standard while traveling.

What Are Its Advantages?

Professionals may prefer this Autel MaxiLink ML629. As the upgraded version of ML619, ML629 is more cost-effective with only a small extra budget for users to enjoy a wider range of diagnostic features. This ABS & SRS scanner retrieves trouble codes not only in ABS and SRS, but also in Engine and Transmission systems. If your car has problems with any of these 4 vehicle systems, the OBD2 Scanner will help you keep track of faults and other forms of the data related.

• ✅MULTI-FOUNCTIONAL CAR OBD2 SCANNER - Easily check engine light error, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed, read and clear SRS error codes. OBD2 code reader features built-in OBD2 DTC lookup library.
• ✅WIDELY COMPATIBLE - Support 9 protocols. Works on most 1996 US-Based, 2000 EU-Based Asian cars, and newer vehicles (OBD II & CAN), domestic and import vehicles. Support 7 languages: Deutsch, Dutch, English, Spanish, French, Russian, and Finnish.
• ✅ACCURATE & LIVE - Live data in both graph and text forms, V310 OBD scanner built in Large and clear LCD display (128 x 64 pixels) with white backlight and contrast adjustment for direct display of test results. No need any Batteries or Charger, gets power directly from the OBDII Data Link Connector in your vehicle.
• ✅EASY TO USE, SAVE MONEY AND TIME - 6 Buttons on the scanner help you quickly find out the car error codes. Just need to connect to your vehicles then it will identify error codes, even a beginner can use it. 2.5 Feet long cable with a thick and flexible insulator makes it safe and long last.
• ✅CLASSIC DESIGN - ATDIAG code reader is designed for car diagnostic code beginners.Classic Handhold Design OBD2 scanner, plug and play, extended to 36 Months Warranty Guarantee.

User questions & answers

Question:	Will this work on a 2014 F150 supercrew
Answer:	It works great on 2002 F150, I don’t see why it won’t work on a newer model.
Question:	Can I program a key with this
Answer:	Hi, it can;t program a key , which brand key you need to do program? so that i can give you advise , email: [email protected]
Question:	Will the atdiag at330 work on bmw motorcycle r1200 gsa
Answer:	Has lot's of functions that it says you can't, use very frustrating! Customer service is a complete pain in the ... After during it on two vehicles and taking pictures they finally sent me a Bluetooth model that has all it's functions working but has or failed to diagnose a transmission problem picked up by another brand. For basic functions related to tuneup seem to function, but if I were going to but another, this would by far be not be the one I would consider. During the process with customer service they keep asking for a positive review. As you can see I'm not a positive review! Just move to another unit and save time and wasted money.
Question:	Will this work with harry's lap timer for os
Answer:	In fact,it can work with it.We have not try.

Product features

ATDIAG V310 OBDII CAR SCANNER

1. The major function of this scanner is detecting the Engine System, read and clear the error codes.
2. Once plugged into your vehicle's 16pin OBDII DLC, the unit will power up and prompt you to start your ignition.
3. If your vehicle has a Check Engine Light comes on, you can use Foseal scanner to read the error codes, Find problems which in need of repairs,​Perhaps fix them by yourself for some simple problem.

Easy to use OBDII code reader

• Where's the OBDII interface?
• How to use it?
• Why I can't erase the fault code?

1. The OBD port is often under the dash, or under a panel below the handbrake in the centre console.
2. Simply plug into the OBD II port on your car and turn ignition on and you ready to go.
3. The fault causing the fault code to show will need to be repaired first then code can be erased.

You Can Get More Information About Your Vehicle

• Read error and Clear diagnostic code,both generic and manufacturer specific codes
• 2.8” large easy-to-read back-lit LCD screen
• DTC one click query
• Easily determines the cause of the check engine light
• View freeze frame Information
• Displays I/M readiness Status
• Retrieves vehicle information
• Reads live data stream
• Real time curve
• Retrieves car speed information

Read fault code

Built-in OBD-II DTC lookup library,Shows the code and what the code means directly, don't need to search online,the scanner will show the definition directly by clicking the error code you selected.

Support up to 7 languages

lanuages:Deutsch,Dutch,English,Spanish,French,Russian,and Finnish