14 best power transmission products

Product description

PowerFill Pro fluid transfer pumps make changing your differential and transmission fluid easy. Just pour your new fluid into the Power Fill tank, insert the hook spout, and pump the tank! Power Fill Pro is available in two sizes and includes a USA-made valve to control the flow and a Schrader valve if you wish to pressurize the units with your shop air. Are you tired of making a mess when you try to fill your transmission or differential? You need Motive Products Power Fill Pro pumps--they're simple, quick, and easy!

• PowerFill Pro fluid transfer pumps make changing your differential and transmission fluid easy.
• Just pour your new fluid into the Power Fill tank, insert the hook spout, and pump the tank!
• Power Fill Pro is available in two sizes and includes a USA-made valve to control the flow and a Schrader valve if you wish to pressurize the units with your shop air.
• Are you tired of making a mess when you try to fill your transmission or differential?
• You need Motive Products Power Fill Pro pumps--they're simple, quick, and easy!

User questions & answers

Question:	How long do these power fills hold up for
Answer:	They are only good for one use then throw it away. Ok just kidding - I've had mine for over 10 years since I made the very first one. Thanks - Motive Products.
Question:	Does the top lid unscrew to make it easy to clean out the inside of the container
Answer:	Yes. Very easy to maintain.
Question:	how big is the tube
Answer:	about 3/8 inch
Question:	How much fluid is left in container after it is done pumping
Answer:	I ran into the same issue. There was about 200mL of 75-90w gear oil left in the bottom of mine that I was unable to pump out.

Product description

Professional Quality Fluid Transfer Pump - 2.5 Gal tank with a schraeder valve for quick pressurization and American made Ball Valve shut off.

• PowerFill Pro fluid transfer pumps make changing your differential and transmission fluid easy.
• Just pour your new fluid into the Power Fill tank, insert the hook spout, and pump the tank!
• Power Fill Pro is available in two sizes and includes a USA-made valve to control the flow and a Schrader valve if you wish to pressurize the units with your shop air.
• Comes with enough hose for use on full size limits

User questions & answers

Question:	Is it easy to clean after use
Answer:	I only use it for new motor oil never actually clean the inside. But ur arm cam fit easily
Question:	can you leave it full of oil during storage or will it seep up into the pump
Answer:	Based on what I remember from the instructions, I believe they recommend cleaning the unit after each use with the appropriate cleaning solution for the fluid used. They say not to use brake fluid to clean the unit. They suggest using denatured alcohol to clean tank and hose (expensive stuff). In my case, I did leave some transmission fluid at the bottom of the pump and stored it that way (did not clean it). I have chosen to use my pump strictly for this one type of fluid and nothing else, so in this respect, not much worried about future contamination issues originating from not cleaning.
Question:	Does it have a check valve to stop back flow
Answer:	No it does not, but it won't flow back as long as you have positive pressure.
Question:	The listing says "motive products- powerfill pro and power extractor- 2 gallon (1745)" . is this for a powerfill unit and separate power extractor
Answer:	No, just the filler.

Product description

Keep high fluid temperatures at bay with a Mishimoto Universal Transmission Fluid Cooler! This cooler features a highly efficient 12" x 7.5" x 0.75" tube-and-fin core that promotes dramatic temperature drops. Mishimoto universal fluid coolers are applicable for use with transmission fluid, engine oil, power steering fluid, and a variety of other automotive fluids. This ready-to-install kit includes 5 ft. of durable rubber hose, a universal mounting kit, and four worm-gear clamps for secure connections. The universal mounting kit provides installation flexibility to fit any application. This cooler utilizes 3/8" push-on fittings, perfect as a replacement for a damaged stock cooler, or as an upgrade to a vehicle not equipped with a liquid-to-air cooler. As with all our products, this fluid cooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Universal mounting for use in any application
• Height: 7.5" / Length: 15.5" / Core Length: 12" / Core Thickness: 0.75"
• 3/8" push-on fittings for ease of installation
• Includes 5 ft. of durable rubber hose, a universal mounting kit, and 4 worm-gear clamps
• Mishimoto Lifetime Warranty

User questions & answers

Question:	Will this work on my 2018 Jeep Grand Cherokee limited
Answer:	Hello, This is a universal cooler and can be adapted to most automatic vehicles with some modification. For additional questions or concerns, please reach out to [email protected]! Thanks, Justin T. Mishimoto Automotive
Question:	Will this fit a 75 chevy k10 4wd with a Th350 auto trans
Answer:	Thanks for reaching out to us. Unfortunately, we are unable to confirm universal part fitment. If the area you would need to fit a transmission cooler is 12" x 7.5" x .75," then this cooler would work for you. Please send an email to [email protected] and we would be happy to assist further. Thanks, Mishimoto
Question:	Will this fit for my automatic Jeep TJ
Answer:	Universal cooler check the size if fit and make sure the hoses it’s enough long
Question:	is the fan included in the 15” length version
Answer:	A fan is not included with this product.

Product features

Mishimoto Universal Transmission and Power Steering Coolers

Mishimoto universal fluid coolers are applicable for use with transmission fluid, engine oil, power steering fluid, and a variety of other automotive fluids.

They utilize 3/8 inch push-on fittings, perfect for use as a replacement for a damaged factory cooler, or as an upgrade to a vehicle not equipped with a liquid-to-air cooler.

Mishimoto's cooler will ensure that transmission temperatures remain low to keep your vehicle performing at its best.

Universal Mounting

Mishimoto engineers designed this kit to include a universal mounting kit that provides installation flexibility to fit any application.

Custom Cooling

Applicable for use with transmission fluid, power steering fluid, engine oil, and a variety of other automotive fluids.

Converts Radiator for Automatic

Automatic transmission users have the ability to use Mishimoto's all-aluminum radiators with their automatic applications.

Hardware Included

Mishimoto's universal transmission coolers include a durable rubber hose, a universal mounting kit, and worm-gear clamps for secure connections.

Heavy-Duty Cooler

This cooler will ensure that transmission temperatures remain low to keep your vehicle performing at its best.

8" Fan

The heavy-duty cooler comes with an 8" electric fan that is perfect for heavy-duty trucks or high-powered applications.

Aluminum Construction

Mishimoto's transmission coolers feature an efficient, lightweight tube-and-fin design that promotes dramatic fluid temperature drops.

Lifetime Warranty

We take customer satisfaction seriously. Every Mishimoto product comes with a lifetime warranty, including accident protection.

Product description

Descriptions:

* The outside fabric wrap is treated with highly oil and heat resistant.

* Specially engineered, twisted, heat and chemically set, neoprene rubber material.

* The body rubber compound is a highly engineered synthetic rubber compound.

* Good choice for replacing C96 V-belt.

Specifications:

* Product Name: Drive V-Belt

* Modle: C-2438/ C96

* Inner Girth: 2438mm/ 96 inches

* Top Width: 21mm/ 0.83 inches

* Height: 14mm/ 0.55 inches

* Material: Neoprene Rubber

* Color: Black

* Weight: 787g

Package Content:

* 1 x Drive V-Belt

• Inner Girth: 2438mm/ 96 inches; Top Width: 21mm/ 0.83 inches; Height: 14mm/ 0.55 inches.
• The outside fabric wrap is treated with highly oil and heat resistant.
• Specially engineered, twisted, heat and chemically set, neoprene rubber material.
• The body rubber compound is a highly engineered synthetic rubber compound.
• Package Content: 1 x Transmission Drive V-Belt.

Product description

Gently revitalizes hardened seals and o-rings to stop leaks in automatic transmissions and power steering units. Compatible with all varieties of power steering and automatic transmission fluids. Improves rough shifting. Use as a leak preventive and seal conditioner to extend the life of automatic transmissions and improve shifting. Exceptional high-temperature stability.

• Stops leaks in automatic transmissions and power steering units
• Gently revitalizes hardened seals and O-rings
• Made with premium plasticizers, lubricants, and additives
• Compatible with all varieties of power steering and automatic transmission fluids
• Improves rough shifting

User questions & answers

Question:	Can I use this in my ford truck with Mercon V transmission fluid
Answer:	I would think so, I used it in my ‘55 ford and it worked great!
Question:	Hello men. i notice a small leak under the transmission fluid pan. should i add this stuff to my transmission fluid? thank you gents
Answer:	You have nothing to lose.I use it for slippage. As of Yet, I have not try it for a my problem. In the past before I used Berryman transmission conditioner for a transmission that was so bad it would not shift until I added it and worked like new. They make a good product. Try it,

Product features

Berryman Transmission and Power Steering Sealer

Berryman Transmission and Power Steering Sealer gently revitalizes hardened seals and o-rings to stop leaks in automatic transmissions and power steering units. Berryman Transmission and Power Steering Sealer is compatible with all varieties of power steering and automatic transmission fluids. It improves rough shifting. Use it as a leak preventive and seal conditioner to extend the life of automatic transmissions and improve shifting. It offers exceptional high-temperature stability.

Directions for Use:

1. For existing leaks or preventive seal conditioning, add 1 oz. to power steering fluid reservoir or one 11 oz. bottle to automatic transmission.
2. Drive vehicle afterwards and maintain proper fluid level.
3. Do not overfill.
4. Allow several days for existing leaks to stop.
5. Repeat treatment with each fluid change.

Product description

NEW Magnefine 3/8" Magnetic Inline Transmission Filter The 3/8” Magnefine Filter System by Magnefine Filters. The MAGNEFINE 3/8” filter extends the filtration spectrum to provide dual filtration that is designed to be completely effective in removing damaging ferrous metal particles from automatic transmissions and power steering systems. When the fluid passes within the effective range (5mm) of the powerful magnet, the MAGNEFINE filter quickly attracts all the hard damaging ferrous particles, even down to an incredible sub-micron level stopping the "chain reaction of wear". (University test show removal of harmful ferrous metal particles to 99.9974%) The secondary filtration media, removes remaining non-ferrous materials (i.e. copper, aluminum, dirt, clutch material) The worldwide patented MAGNEFINE dual filtration filter is the only effective form of filtration that can provide dynamic small particle extraction while maintaining full line flow capabilities for automatic transmissions and power steering systems. EXTENDS TRANSMISSION SERVICE CYCLE continual cleaning of the transmission fluid actually produces cleaner fluid than the new fluid you put into the system. Major OEM's recommend adding 10,000 miles to your service cycle with the use of the Magnefine filter. EXTENDS COMPONENT LIFE filtering out ferrous particles 3 microns and up will enhance component life by 7 times, according to Sayles and Macpherson. DESIGNED FOR EASY INSTALLATION easily installed on both hose and steel lines. SIMPLIFIES TRANSMISSION SERVICING No more dropping the pan to service the pan filter at your normal cycle. Pan filter servicing is recommended at 100,000 miles. Servicing may be accomplished by evacuation at the inline filter points or by draining. STOPS "CHAIN REACTION OF WEAR" Removing the ferrous particles in the 3 to 15 micron range with the powerful magnet, stops the wear and break down of the stabilizers.

• Removes ferrous material down to 3 microns
• Filters non-ferrous material to 25 microns
• Simple Installation

User questions & answers

Question:	Will this fit on a 7.3 liter F
Answer:	this filter fits a 3/8 transmission line . I know absolutely 0 about your ford other than it is a big diesel . Search online for installing transmission filter on your specific year f-250 .
Question:	Will this fit on 08 tahoe power steering line
Answer:	Yes, it would require the 3/88" size.
Question:	Will these fit 2005 acura tsx
Answer:	It will have to be plumbed into the transmission fluid cooler circuit. They can be installed on most all vehicle's equipped with an automatic transmission installed mine on a 2005 ford explorer, after a rebuild to help filter out any impurities.
Question:	For a 2007 acura tl type-s, for the atf, is the direction flow at "hose 23" from "pipe 26" to the radiator? (reference nums from acura parts diagram
Answer:	On Hondas & Acuras, small length side of the oem filter (that caps/wraps over longer bottom) is always pointed toward the directional flow. Hope that helps!

Product description

Power Steering & Rack Tester Takes the guesswork out of power steering analysis quickly and accurately, by detecting defective power steering pumps & gears, plus kinked or clogged lines. Includes most adapters to test Domestic cars and light trucks, and some imports. Handy diagnostic tool for rack problems. Dual 2 1/2" easy to read gauge records pressure from 0-2000 PSI and 0-140 bar. Instructions and specifications included. Packaged in plastic box. Made in the U.S.A.

• package height : 26.416 cm
• package length : 5.08 cm
• package width : 13.716 cm
• Package Weight: 1.065 kg

User questions & answers

Question:	Does it fit with vag cars
Answer:	Not 100% positive, but it comes with many different fittings so you should be able to find one that fits.
Question:	will it fit on a 4.3 mercruiser steering actuator
Answer:	I believe it will
Question:	will this work on a 2003 mini cooper
Answer:	I believe it will with right adapter
Question:	Does this come with instructions or ballpark figures on where pressure should be and the procedures
Answer:	No it doesn't. There are general instructions on where to test for pressure. Based on where there is and is not pressure, it helps you narrow down which part might be the one that failed. I returned it, because it didn't have the correct fitting for the Saab I was diagnosing.

Product description

The Cable Mount Bleeder Bottle features a stainless steel lanyard that is perfect for hanging the bottle from the bleeder screw or a lug stud. This bottle features no spill/no leak hose storage bung and bottom tube fluid entry. The large 16 oz. holds twice the fluid as those other bottles, which allows more flushes before having to empty. The Motive Products 0100 power bleeder works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps (This kit includes adapter 1100). It also fits some GM clutches. Together, these make brake bleeding clean and easy, without involving another person!

• Motive Products 0100 European Power Bleeder
• Works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps
• Clear Bottle with Flexible 10 inch Hose and 7 inch Cable
• Cable Mount Bottle- Easy use for one person
• Easy one-person operation means you won't need to ask a helper to pump the pedal while you open and close the bleed valves

• Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines
• Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge
• Features custom cap to fit most late model Chrysler and Dodge cars and trucks.
• Also fits some after market reservoirs and master cylinders made by Strange Engineering and Wilwood that use two twist on caps.
• Built-in heavy duty hand pump (no other pressure source is needed) and precision pressure gauge ensures safe and effective operation.
• Excellent Fit and Finish

User questions & answers

Question:	will this product work on a 1999 dodge ram
Answer:	Yes i bought it to do the brakes on my 2001 doge ram 1500. Only issue i had was the treads by the gauge had a slow leak but went away after slightly tightening it. Made flushing and bleeding the brakes quick and simple.
Question:	will it work on a 2005 dodge dakota
Answer:	It should. It worked on a 2004 Jeep Wrangler for me.
Question:	Will it work on a 2001 pt cruiser
Answer:	I would think so, not 100% sure, sorry.
Question:	I was wanting to buy the 1702 power extractor, the 1710 magnum powerfill pump, and the 1140 adapter. can you help me with those
Answer:	I googled the maker and got the part number to make sure it would work on my jaap.

Product features

MP-0103

Power Bleeder- pressure brake bleeder, 2 quart capacity, with round 3-tab twist-on adapter (1103) for late model Chrysler vehicles (most 1983 and later), Late model Jeep, and Strange Brand Master Cylinders.

Product description

Make bleeding brakes clean and easy with the magnet mount bleeder bottle. Features no spill/no leak hose storage bung and bottom tube fluid entry. The large 16 oz. holds twice the fluid as those other bottles, which allows more flushes before having to empty. The Magnet Mount Bottle features a 16 lb. magnet and is great for hanging the bottle in multiple locations on the vehicle and stores away easily on the side of the tool box. Purchase as a kit with Motive Products MP0109 power bleeder. Motive Products European Black Lable POWER BLEEDER features Custom-machined aluminum cap and deluxe swivel fitting. Comes with an extra length of high grade poly urethane tubing that won't cloud or crack with exposure to brake fluid. Works on all cars with 45mm threaded hydraulic fluid reservoir caps. Includes MP1109 custom adapter assembly. POWER BLEEDER. Features: * Heavy duty 2 quart pressure tank holds enough fluid to do complete flush & bleed. * Built-in hand pump (no other pressure source is needed) * Precision pressure gauge ensures safe and effective operation. * Tested for compatibility with both standard and synthetic hydraulic fluids.

• Motive Products 0109 European Power Bleeder 2 quart pressure tank holds enough fluid to do complete flush and bleed
• Built-in hand pump (no other pressure source is needed)
• Clear Bottle with Flexible 10 inch Hose and 7 inch Cable
• Magnet Mount Bottle- Easy use for one person
• Easy one-person operation means you won't need to ask a helper to pump the pedal while you open and close the bleed valves

Product description

Hapco Power Steering & Trans Sealer contains lubricating and sealing agents to quickly stop leaks in all transmissions and power steering units. This formula works to repair the major cause of leaks by restoring old, hard rubber seals. Does not contain petroleum distillates and is compatible with all transmission and power steering fluids. Hapco Power Steering & Trans Sealer is also highly recommended for preventative maintenance in all transmissions and power steering units. Its controlled viscosity and detergent action ensures maximum lubrication and helps prevent the formation of harmful deposits. Provides a smoother, quieter operation when added with each fluid change. For Best Results: Add one bottle of Power Steering & Trans Sealer to transmission or power steering unit. Drive vehicle as normal to allow circulation of fluids.

• Makes a permanent seal in power steering units and transmissions
• Contains a blend of sealing and lubricating agents
• Helps provide a smoother and quieter operation
• Does not contain any particles or solvents
• Compatible with all transmission and power steering fluids

• Heavy duty 2 quart pressure tank holds enough fluid to do complete flush and bleed
• Built-in hand pump (no other pressure source is needed)
• Precision pressure gauge ensures safe and effective operation
• Tested for compatibility with both standard and synthetic hydraulic fluids
• All bleeders come with everything needed to bleed hydraulic brake or clutch system

User questions & answers

Question:	Does this bleeder come with a resivour cap that fits an 06 bmw 330i (E90)? Also where can I get additional caps to use this on a 2011 kia sorento & Gm
Answer:	Very good cap fits all bmw's that I know of. I have worked on bmw's since 1988.
Question:	Will this fit older porsches (pre 1990) and newer porsches (2006-on
Answer:	It should. The cap provided in this kit is 45mm. Double check on your older Porsche but for 2006+ for sure it will work. Just not familiar with the size on the pre-90s.
Question:	Does it work for VW jetta
Answer:	The power bleeder works for all modern Germany cars. I've personally used it on pre-2007 Jettas and my wifes 2012 Jetta. Most automakers are using shared supply chains so the result is that one bleeder works for many cars. I've also used it on my 1997 BMW.
Question:	any idea what the difference is between this model and the 0100 red label model? Both say for European cars but the cost is $20 difference
Answer:	The black label has a machined aluminum cap, and the red label has a plastic cap. It is well worth the $20.00 difference.

Product features

109 BLACK LABEL EUROPEAN POWER BLEEDER

Power Bleeder- pressure brake bleeder, 2 quart capacity, with 45mm threaded adapter (1109)- (enhanced version of model 0100) includes a machined aluminum adapter cap with swivel fitting for easier attachment to reservoir. Kit comes with 6 feet of tubingstandard kits are two feet. Also fits some GM and Miata and Clutch Cylinders.