13 best hvlp conversion spray gun
HVLP stands for High Volume Low Pressure, which refers to a type of spray gun commonly used in automotive refinishing and other applications where a smooth and even finish is crucial. HVLP conversion spray guns are specifically designed to operate at lower pressure levels while delivering a high volume of paint or other finishing materials.These spray guns are widely used by professionals in the automotive industry and by hobbyists for various painting tasks.
Here are some key points about HVLP conversion spray guns and their relevance to Spray Guns Accessories, Body Repair Tools, Tools Equipment, and the Automotive industry:
Efficient Paint Transfer: HVLP spray guns are known for their high transfer efficiency, meaning a large portion of the paint material is deposited onto the surface being painted, reducing overspray and saving on material costs.
Smooth Finish: The low pressure of HVLP guns results in a softer spray, which helps achieve a smoother and more even finish. This is particularly important in automotive painting where a flawless surface is desired.
Environmental Benefits: HVLP spray guns produce less overspray and air pollution compared to traditional high-pressure spray guns. This makes them more environmentally friendly and compliant with regulations.
Suitable for Various Materials: HVLP guns can handle a variety of finishing materials, including automotive paints, lacquers, varnishes, and clear coats. They are versatile tools used for different applications within the automotive industry.
Adjustable Settings: HVLP spray guns often come with adjustable settings for air pressure, fluid flow, and fan pattern. This adjustability allows painters to fine-tune the spray according to the specific requirements of the job.
Body Repair Tools: In the context of body repair, HVLP conversion spray guns are used to apply primer, basecoat, and clearcoat layers, ensuring a professional and durable finish after repairing dents, scratches, or other imperfections on the vehicle's body.
Tools Equipment: HVLP spray guns are essential pieces of equipment in automotive repair shops, painting studios, and DIY workshops. They are part of the toolkit used by professionals and enthusiasts for achieving high-quality paint finishes.
HVLP conversion spray guns are valuable tools for anyone involved in automotive refinishing or other applications where a smooth and precise finish is necessary. Their efficiency, versatility, and environmental benefits make them a popular choice in the automotive industry and various other sectors requiring high-quality spray finishing.
Below you can find our editor's choice of the best hvlp conversion spray gun on the market
Wagner Power Products 276124B HVLP Conversion Gun
Product description
Convert your compressor into a professional fine finish sprayer with this conversion gun from Wagner. The gun converts standard high-pressure air compressors with 1-1/2 horsepower and up into a SoftSpray HVLP spray system. With the gun connected directly to the compressor, a regulator valve helps control air and fluid control. --Brian D. Olson
What's in the Box
Conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup.
- Paint spray gun for converting high-pressure compressors into HVLP fine-spray system
- 3 spray patterns; 89 percent product transfer efficiency; fluid and air controls;
- Works with compressors with at least 1-1/2 horsepower; all metal construction
- Includes conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup
- Weighs less than 6.6 pounds
User questions & answers
| Question: | What needle size do i need to spray latex paint with no thinning |
| Answer: | Hi, Yes, these are water colors. Arteza Team |
| Question: | where can i get cup gaskets for this gun |
| Answer: | They do but if you add honey they won’t crack as much |
| Question: | Can i paint exterior of my home with this |
| Answer: | I suppose it depends on how you use them. I fill my pens with water and dip. They work for that. |
| Question: | Will this gun work with a turbine? The picture appears to be a turbine gun with the large air inlet. Do you have a turbine model of this gun? Thank |
| Answer: | it contains: yellow ohcre burnt sienna ultramarine blue also included are: titanium white lemon yellow scarlet red crimson red sap green light green cerulean blue burnt umber noir(black) not included: cadmium yellow cammium(?) red these colors do mix well to create new colors of your choosing. |
Apollo Model 7700C Conversion Atomizer Production Spray Gun
The Atomizer
Product description
Apollo 7700C Conversion Atomizer Production Spray Gun. FLAWLESS FINISHING FROM
OUR UNIQUE ATOMIZING TECHNOLOGY. This unique spray gun delivers enhanced True HVLP performance and
flawless results with any make turbine or air compressor, 3HP/20 gallon (75
litre) tank or larger. Precision fan control through the Xpansive Fan Control
Ring. Popular Woodworking "Best New HVLP Tool" award AWFS Sequoia award
winning design Compressed Air HVLP Production gun has a bronze plated spray
head, and is supplied with carrying case spare parts kit and a wrench spanner.
Conversion Package Includes: A7700C Conversion
Atomizer spray gun, carry case, 1.0mm tip/needle installed, spare parts kit,
cleaning brush, 2-year warranty.
- Includes: A7700C Conversion Atomizer spray gun, carry case, 1.0mm tip/needle installed, spare parts kit, cleaning brush, 2-year warranty.
- Delivers enhanced True HVLP performance and flawless results with any make turbine or air compressor, 3HP/20 gallon (75 litre) tank or larger.
- Bronze plated spray head
CARTMAN MP-400 HVLP Gravity Feed Air Spray Gun 20.2 oz Capacity, 4.0-6.0 CFM (Cubic feet per Minute), Optimal Working Pressure 2bar/29psi, Nozzle Size:1.3mm with Air Regulator
- Composite construction for lightweight and comfortable. HVLP (High Volume Low Pressure) technology provides a higher transfer of materials while reducing bounceback and overspray, increase transfer efficiency of the coating materials to the surface (up to 85%). With HVLP technology you also get a significant material savings, which is up to 30-40%.
- Super-precision external mix cap for perfect pattern. Non-drip cup protects against paint loss and ensures less mess, saving your time and money. Filter ensures clean paint, helping you get the best end result. Suspension hook enables easy storage.
- Built-in 3 control knobs: Fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. Each adjustment knob has been individually calibrated by our technicians to give you the best possible paint application.
- All the core parts of spray gun are produced by high precision "CNC" machining center to ensure the superiority and durability of product quality. Each piece of spray gun passed a rigorous manual inspection to ensure excellent atomization performance.
- Set includes: 20.2 oz (600cc) nylon cup, metal air regulator, a cleaning brush, a plastic filter, a multi-size wrench. Nozzle size 0.051 inch / 1.3mm. Recommended working pressure 2.0bar(29psi).
User questions & answers
| Question: | Can this gun suit for any main machine |
| Answer: | I dont know but they are definitely larger than some other paints i’ve bought that say extra large. They came about 6 inches tall i think(i didnt measure them) but it suprised me how much i got for that good quality. |
| Question: | Your manual states air consumption at "about 15 cfm." Why does the description say 3-4 cfm |
| Answer: | I've tried and it's not quite opaque or thick enough. Also the colors are terribly garish. I'd use this paint for practicing or teaching techniques but not for a serious painting or finished product unless it's an abstract. If you're doing bob Ross pallet knife painting i suggest buying oils instead of acrylic since that's the medium he uses. |
| Question: | Is the spray gun 3.0-4.0 cfm or is it what the instructions says it needs 15cfm before i purchase it thanks |
| Answer: | Yes. Colors are as pictured. |
| Question: | will this gun work with a portable air compressor at 4cfm 90psi |
| Answer: | No, this is not body paint. Your skin needs to breath, use only paint that is advertised as body paint since it is specifically formulated for that purpose. |
Dynastus 20 oz. Professional Composite HVLP Air Spray Gun Detail Paint Sprayer, 2.0mm Nozzle, with Air Regulator Kits
Product description
DESCRIPTION:
The DYNASTUS spray gun is a composite gravity feed HVLP spray gun designed to spray all light to medium viscosity materials. Enamels, lacquers, polyurethane, urethane top coats (including basecoat/clearcoat) and all primers can be applied. This spray gun is supplied with a 20 oz. (600 ml) gravity feed cup, with 2.0 mm nozzle. This air regulator will allow you to have precise air control at the paint sprayer for best, consistent results. This paint gun comes in handy when working with small areas or those tight places that are hard to reach with a larger spray gun. It sprays anywhere from 20 - 43 PSI, a good general pressure to start spraying at is 30 PSI.
Kit include:
Extra spanner
Handle Tooth Brush
wire brush
Filter
1/4 NPS female plug
Air regulator with gauge
- Suitable for water-soluble paint and variety of spray paints, dedicated to car repair industry, top quality furniture, and other precision equipment which need fine surface finishing.
- Composite construction for lightweight and comfortable for longtime operation even in winter time, HVLP (High Volume Low Pressure) to get superior finish and save paint
- Air regulator allows you to have precise air control, helping you get the optimal atomization. The stainless steel needles and precision machined air caps, give you a fully atomized and consistent spray pattern for a smooth professional finish
- Built-in 3 ergonomic anodized knobs are perfect for precise control: fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow
- Includes extra spanner, handle tooth brush, wire brush, 1/4 NTP female plug, filter and air regulator, helping you get the best end result
User questions & answers
| Question: | have you fixed the regulator issue.You know the fact that it doesn't work |
| Answer: | The one I revived was bad. I ought a different one for the gun. |
| Question: | Are different size nozzels available for this spray gun |
| Answer: | Sorry, it's not equipped at the moment |
| Question: | I have a 6 gallon compressor 165psi 2.6 scfm 90psi work fine w this gun |
| Answer: | Yes it will work with this compressor. I have a portor cable 6 gallon 150 with the same spec and it runs the gun fine even constantly. The gun only draws 2-3 cfm. Maybe 4+ if your fan and fluid are wide open. Fan controls most of your air required. The fluid trigger does to a extent. I've even had the compressor cycle off while using it. So it's awesome to use as a portable touch up gun. They make larger cups with it's cup fitting size. it doesn't have to be touch up. One last thing if you don't want a big stationary 220v compressor. What I did to paint is parallel two or three compressors together. Lowe's air tank $60 7 gallons already has the air fitting. Go to any hardware store. By a T air fitting. Connect the two compressors to the T. And either the t to a air receiver or into your using line. Compr seors are cheap used on Craigslist. Or 4.0 crm compressors go on sale $100 all the time. I now use kobalt 26 gallon 4.5, central pneumatic 10 gallon 5.3 cfm at 90 and a porter Cable going into a receiver tank 7 gallons. If they arenot the same psi set the regulator of the higher one to the highest of the other close enough. Every compreseor and tanks have safety relief valves. Much cheaper and portable then 220v I have to roughly 50 gallons at 125psi and 5.3 peak horsepower. Or just not plug in the portor cable and let it be back filled through regulator for extra space and have that at4.3 horsepower and 10cfm at 90 plenty to paint. And in 5 mins it's in and out of my truck. Just make sure you plug each compressor into a separate breaker. Now mostly just use the 2 big powerful ones with the air tank and leave the pancake compressor out. I can paint a call non stop without it. $300 at harbor freight you can get 2 10 gallon 5.3 compressors 7 Gallon portavle air tank from Lowe's and you have a 27 gallon 125psi at 10 cfm@90 or if you have air tank just get a new 1/2npt fitting to be run a regular air fitting. I just prefer it ready to go out the box. The price of a pancake is the same of a good 4cfm compreasor on sale shop around. I've seen people connect 4-5 pancakes together to paint. Just depends on circuitaas long as one compressors safety valve works it works for all of them being connected. I've done this for longer some have been alive worse I've had to do was flip a breaker switch |
| Question: | Does this gun spray solvent paint |
| Answer: | Yes, but the paint should be filtered before spraying. |
NEIKO 31216A HVLP Gravity Feed Air Spray Paint Gun | 2.0 mm Nozzle Size | 600 cc | Air Gauge Regulator
Product description
Professional quality HVLP (high volume, low pressure) spray gun kit gives professional results with adjustable flow rate, pressure and spray pattern for more consistent coverage with minimal overspray.
- [HEAVY DUTY]: One-piece all-steel gun body, rust-resistant stainless steel nozzle and solid brass cap for durability and longevity.
- [HVLP]: Gravity-feed fluid delivery design works together with three adjustable valve knobs for precise paint application.
- [SPECIFICATIONS]: Operation pressure 40 PSI; Working pressure 10 PSI; Average air consumption 4.5 CFM.
- [MULTI-USE]: Color coded 2.0 mm nozzle size is perfect for clear coat and a variety of automotive and household painting projects.
- [INCLUDES]: 600cc (20.3 fl. oz) aluminum cup with lid, metal air gauge/regulator, cleaning brush and a multi-size wrench for assembly/disassembly.
User questions & answers
| Question: | Is the pressure gauge necessary? i am also looking at an astro brand spray gun and none of them include the pressure gauge? thanks |
| Answer: | Acrylics clean up well as long as you do so fairly soon after using them. If you wait three days to clean the table you painted on, then it's going to be extremely difficult to clean. To be clear these are not 'washable' in the sense of other paints and markers marketed as washable. Once dried, acrylic paints are permanent, but if you clean up right after using them before they've had a chance to set in, they will clean up fairly easily off your hands, brushes, tables, etc. |
| Question: | Would this be good to paint a car |
| Answer: | Yes it is matte however the paint is amazing the way it goes ob |
| Question: | Has anyone used this unit for kitchen cabinet refinishing with Latex Cabinet Paint |
| Answer: | These are water base paints and therefore do not pose any threat to the environment. |
| Question: | I plan to paint kitchen cabinets using oil base or alkyd enamel. is 2.0 mm the proper size for this paint |
| Answer: | I have the same problem. It looked thin and had to do a few coats on my painting. |
Product features
Perfect for Home DIYs
The classic high pressure low volume gravity feed fluid delivery design makes paint jobs a breeze. Equipped with three control valves to get the perfect spray you need.
Heavy Duty
The all steel body provides a wonderful rust resistant spray gun and stainless steel nozzle provides great durability.
Complete Set
The set comes with a metal air gauge and regulator for you to know how much air pressure you are getting and includes cleaning brush and multi-size wrench for easy cleanup.
Consistent Application
Each air spray gun is equipped with a fine nozzle size that is perfect for applications and projects around the house.
Easy Clean Up
Comes with aluminum cup with lid to hold 600 cc (20.3 fl. ounces) of fluid at one time without spills.
Tethering Trigger
Spray just the exact pressure and amount you need with easy to use and control tethering trigger style handle.
Fuji 9600-G Gravity G-XPC Spray Gun
Product description
The new Fuji XPC Gravity Spray Gun features a side pattern control knob to adjust the size of the fan from small to large and any size in between. The pattern control knob allows you to adjust to the exact size of the object you are spraying. This is a tremendous improvement over the antiquated 'collar' pattern adjustment still used on most HVLP turbine guns that do not provide fully incremental sizes. Other desirable features include 100% stainless fluid components, stainless springs, metal knobs and collar, ergonomic handle that is always cool to the touch. 400Cc (a little less than 1 pint) gravity cup is installed – this is the ideal size for medium-sized projects such as cabinets, furniture etc. 1.4mm Aircap Set #4 is installed – perfect size for most fine-finishing.
From the Manufacturer
The new Fuji XPC Gravity Spray Gun features a side pattern control knob to adjust the size of the fan from small to large and any size in between. The pattern control knob allows you to adjust to the exact size of the object you are spraying. This is a tremendous improvement over the antiquated 'collar' pattern adjustment still used on most HVLP turbine guns that do not provide fully incremental sizes. Other desirable features include 100% stainless fluid components, stainless springs, metal knobs and collar, ergonomic handle that is always cool to the touch. 400Cc (a little less than 1 pint) gravity cup is installed – this is the ideal size for medium-sized projects such as cabinets, furniture etc. 1.4mm Aircap Set #4 is installed – perfect size for most fine-finishing.
- Featuring "Tilt and Swivel" 400cc Material Gravity Cup.
- Professional spray gun now features pattern control knob to adjust size of fan pattern from small to large
- 100% stainless steel fluid components, metal knobs, ergonomic handle is insulated – never gets hot.
- Non-Bleed Spray gun for less blowing around of shop dust
- High-Efficiency Air cap installed for even less overspray
- Insulated Stay-Cool Handle
User questions & answers
| Question: | Hello everyone, I bought this spray gun, but there was only one problem, paint is pouring out of the spray cap when the compressor is running, I did n |
| Answer: | I'm not too sure... Haven't sprayed latex out of it... I think I read some threads or videos spraying latex but they thinned it out... I'm just weekend handyman even with a diff needle I would still thin it.. I can't see getting a fine mist without thinning it with how thick it is... But im no where close to a pro... |
| Question: | Can this be used with the dyc turbine and hose |
| Answer: | They are available two separate ways, individually the part number is 0277495 or they are available in a six pack which is part number 0297052. You can order either from us at 1-800-328-8251. |
| Question: | can you use auto motive paints in this gun |
| Answer: | This unit is more for finer finishing, painting top coats and finishes, it is for use with an air compressor or turbine which makes the finish lighter |
| Question: | Are the older xpc siphon gun nozzle sets interchangeable with this 9600-g gravity g-xpc gun |
| Answer: | Works with air compressor only |
Product features
Fuji Spray G-XPC is one of a kind!
The G-XPC spray gun is not just any gravity feed spray gun; it allows to spray most intricate angles. The cup assembly has a swivel / tilt cup feature that by a small quick adjustment you can go from spraying baseboards to crown molding yet still keeping the cup upright. The cup capacity is 400cc (400ml). There is also a larger 600cc (600ml) cup available as an accessory.
Fuji Spray's very own Side-Mounted Fan Pattern Control design
Responsive adjustments right at your finger tips, the side-mounted fan pattern control dial is one of the key components to the overall unique function of the G-XPC. The fan pattern will spray from a wide 12 inch oval shaped pattern all the way down to a small 1 inch circle, and anything in between.
Wide Range of Air Cap Set Sizes to Choose From
Whether the materials (paints) are thick or thin, the Fuji G-XPC Spray Gun will handle most coatings with the adequate air cap set installed. The variety of air cap sets available will make the spray gun versatile against thick materials like latex paint, milk paint, chalk paint , etc. In addition, there are air cap sets available to spray thinner materials like stains, dyes and clear finishes.
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051
Product description
Made For SprayTech CS5100, SprayTech CS8100, SprayTech CS9100 & CS9900 HVLP units. Comes standard with a #3 Proset (needle set). 2 Stage Trigger (Air and Material). Maxum II Non Bleeder Click-in air cap Stainless Steel needle and nozzle. Comes standard with a #3 Proset (needle set). Patented dual-pivot trigger (reduced pull and less fatigue). Increased internal air passages. Solvent proof Teflon Seals. Multi-position pick -up tube (creates longer use without refill). External packing nut adjustment. Optional air inlets (provides non-bleed to bleed conversion). This gun is included with the purchase of our Titan Capspray 55, 75, and 95 HVLP Turbine Units. Includes Free Check Valve Kit 0297051: This is a Wagner Spraytech HVLP Check Valve kit 0297051 . Kit contains 3 Check Valves. Fits all the Wagner, Spraytech and Capspray HVLP guns. Check your manual or manufacturers website for part numbers. Valued at $19.15. Check Valve Kit UPC: 024964118052 . Spray Gun UPC: 024964197293 .
- Made For SprayTech CS5100, SprayTech CS8100, SprayTech CS9100 & CS9900 HVLP units.
- 2 Stage Trigger (Air and Material). Patented dual-pivot trigger (reduced pull and less fatigue).
- Solvent proof Teflon Seals. Comes standard with a #3 Proset (needle set).
- Optional air inlets (provides non-bleed to bleed conversion).
- Includes Free Check Valve Kit 0297051
User questions & answers
| Question: | What size is the nozzle |
| Answer: | I think it'll be alright. my 26gal is rated at 5.8scfm at 90psi and it supports this gun just fine. You will not find a better gun in this price range. It is worth easily 2-3 times what it's selling for. |
Tekna 703517 Prolite 1.3mm and 1.4mm Fluid Tip Spray Gun with TE20/HV30 Air Cap
Product description
Tekna ProLite Gun Model No. 703517 Includes: TEKNA ProLite High Efficiency and HVLP Gravity Spray Gun, 1. 3 mm on the Gun, 1. 4 mm Nozzles, DeKups adapter (DPC-43), TE20 High Efficiency and HV30 HVLP Air Caps, Digital Gauge with Air Adjusting Valve (HAV-555), Gun Wrench and Color ID Ring. Excellent for solvent-based coatings and a must for waterborne. Fully protected outside and inside for high corrosion resistance — gun coating has non-stick properties. High transfer efficiency for material savings.
- The included DeKups Adapter makes this gun DeKups Ready
- Optimized performance in climates varying from hot and humid to clean and dry
- Three air caps developed using advanced fluid dynamics technology for excellent atomization
- Packaged as a solution with multiple components
- Excellent for solvent-based coatings and a must for waterborne
User questions & answers
| Question: | Will a 30 gallon air compressor be enough for this gun |
| Answer: | Google phelps refinishing, he can tell you all you want know about Fuji guns |
| Question: | does it come with the 1.5 fluid tip and needle |
| Answer: | Pressure gauges are not necessary if you have some sort of gauge in your air system allowing you to adjust the air pressure. However, having a gauge at the gun will allow better and more consistent control of pressures recommended for the products your spraying, which will help you with achieving the desired results. |
| Question: | How well would this spray gun work for spraying latex paint on trim? What fluid tip size and air cap would be recommended? I also want to spray Bona |
| Answer: | I bought this to spray primers and it works very well for that task but for bases and clears I'm not sure how it would do. I wouldn't recommend it simply because of the fact that it has a 1.7 mm tip which is too large for bases and even clears so if you do decide to go with this brand gun I'd suggest going with a 1.4 mm tip. I personally own a Finnex FX3000 with 1.4 mm tip to spray base and clear coats and I LOVE that gun. Works great, sprays smooth and the design is awesome, very comfortable in the hand. |
| Question: | Why are you selling it? I will have no warrentee |
| Answer: | With the nickel finish you'll generally want paint with thinner, otherwise stuff gets gummy on the inside, use thinner and clean well and you'll be golden. On long work projects I recommend cleaning after 60-90 minutes of use then resuming. |
Apollo Sprayers HVLP 7500/7700 Series Spray Gun Needle - 1.3/1.5mm
Apollo Sprayers
Product description
Apollo Sprayers HVLP A7520-1315 1.3/1.5mm needles are compatible with both the 1.3mm and 1.5mm nozzles. When paired with the 1.3mm nozzle, they accommodate higher-viscosity versions of the thin laquers, thin enamels, water-based finishes, and automotive, marine and airplane finishes When paired with the 1.5mm nozzle, they can be used for catalyzed laquers, conversion varnish, primers, high-viscosity industrial coatings, urethanes, and enamels. Compatible with all 7500 and 7700 series spray guns. Made in the USA.
- Apollo Sprayers HVLP A7520-1315 1.3/1.5mm needle
- When paired with the 1.3mm nozzle, they accommodate higher-viscosity versions of the thin laquers, thin enamels, water-based finishes, and automotive, marine and airplane finishes When paired with the 1.5mm nozzle, they can be used for catalyzed laquers, conversion varnish, primers, high-viscosity industrial coatings, urethanes, and enamels.
- Compatible with all 7500 and 7700 series spray guns.
- Made in the USA.
User questions & answers
| Question: | Do you have a nozzle to match this needle |
| Answer: | judging by the photos of the DYC gear I think the Fuji will couple correctly. Most true HVLP gear makers use similar couplings. I don't think I'd try spraying Plasti Dip through my Fuji gun though. |
| Question: | Do you have the nozzle that is compatible with the needle? Don't need the air cap |
| Answer: | The G-XPC is capable of spraying automotive paints. Historically, the below air cap sets have proven to work best with automotive finishes: • 1.5mm-1.8mm for primer application • 1.3mm for base coat • 0.8mm-1.0mm for clear coat In general, low viscosity materials (such as a clear coat) will require a smaller sized air cap set such as the 1.0mm. As the viscosity of the material increases, you will have to use larger sized air cap sets to effectively atomize the high viscosity products. |
CAMPBELL HAUSFELD DH5300 General Purpose Spray Gun
Campbell Hausfeld
Product description
Thanks to Campbell hausfeld’s general purpose spray gun, painting doesn't get much easier or faster. Able to tackle all of your home, farm and commercial painting needs, this spray gun can conveniently handle all paints and materials. And speaking of convenience, the spray gun can be converted from pressure to siphon feed and internal or external mix air caps. Changing it from siphon to pressure feed only requires the twist of a knob. That's it! the conversions don't stop there either: the spray gun can be converted so you can use it with a separate pressure paint tank; and you can even convert it from non-bleeder to bleeder style, allowing you to use it with standard or tankless air compressors. There’s also a pattern control feature that adjusts Fan size for truly improved results. Campbell hausfeld’s general purpose spray gun nicely works in conjunction with paint tanks and remote canisters, includes a fluid canister, has a 4.3 average SCFM requirement at 90 psi, and a ¼-inch male NPS air inlet. Those old brushes and rollers are looking pretty useless right about now.
From the Manufacturer
Adaptable to a wide range of applications, the Campbell Hausfeld DH5300 1-Quart General Purpose HVLP Spray Gun adjusts from siphon to pressure-feed with the twist of a knob, making it compatible with a variety of materials. It features pattern control, to adjust fan pattern size, and is convertible from a non-bleeder to a bleeder style for use with standard or tankless air compressors. The DH5300 works with paint tanks or remote canisters for tough-to-reach areas. It includes 1/4-inch male NPS air inlet and operates at 4.3 average scfm at 40 PSI.
- Spray gun nicely works in conjunction with paint tanks and remote canisters, includes a fluid canister, has a 4.3 average SCFM requirement at 90 psi, and a ¼" male NPS air inlet
- Able to tackle all of your home, farm and commercial painting needs, this spray gun can conveniently handle all paints and materials
- The spray gun can be converted from pressure to siphon feed and internal or external mix air caps, and changing it from siphon to pressure feed only requires the twist of a knob
- The spray gun can be converted so you can use it with a separate pressure paint tank, and you can even convert it from non-bleeder to bleeder style
- There’s also a pattern control feature that adjusts Fan size for truly improved results
User questions & answers
| Question: | Is this really an HVLP gun? It doesn't seem like it from the specs |
| Answer: | Yes. The Hobby-PRO is an M-model spray gun and this will allow you to convert the gun into a gravity feed. |
| Question: | can you use latex paint with the sprayer |
| Answer: | Yes, the 9960 - U-Tube Conversion Kit is compatible with the T70 spray gun. |
| Question: | Can you spray directly from a 1 gallon or 5 gallon bucket or do you have to continually fill the 1 quart container |
| Answer: | Needle is a 3 |
| Question: | at what pressure does the compressor have to be set at for the DH53oo spray gun |
| Answer: | I had same problem the lid is a bitch to get on right away.You have to put lid on turn it in the opposite detection tell you fill it fall down ini place then turn to the right to tighten it it takes a little while to get the fill for it , Allways make sure lis and paint holder threads all clean . But what i did I replaced the paint cup and lid from a difernt gun which was easer then trying to get it on right you can get a paint cup and lid at horbor frieght the fits I think for around 15$ and thats with the gun ! |
TCP Global Air Undercoating Spray Gun - Apply, Rubberized Undercoat, Rust Proofing, Chip Guard Paint - Pneumatic Automotive Application Sprayer Includes Regulator fits Quart Cans and Bottles
- Durable pneumatic air application gun that's excellent for applying automotive rust proofing, rubberized undercoating, chip guard, truck bed liner and other general purpose coatings. Gun can be used with oil, solvent and water-based materials.
- Precisely machined light weight well-balanced gun that can be used for applying different viscosity coatings and various textures. This gun is great for use applying all other single and two component sprayable truck bed liner coatings that come in a One Quart size container.
- Applicator gun has a die-cast aluminum alloy body with an easy grip trigger handle, plus an air pressure regulator with gauge.
- Note: Gun accepts 1 quart bottles and cans with 1.75 inch standard U.S. outside diameter threads. Gun does not fit 1 liter bottle threads.
User questions & answers
| Question: | What does this gun screw onto? Does it come with a cup to pour material into or does it screw right on to whatever jug |
| Answer: | Dont use it for latex or any industrial/house paint. Youd need a lot of air to run that gun depending on air cap (hv30 id reccommend) . with latex house paint itd gum up bad at the fluid needle and probably jam constantly. If you really want to youd have to run a big needle (1.5 i believe is the biggest prolite offers, even that is too small) and you would have to even reduce the paint for it to flow out and atomize nice enough. |
| Question: | Will this suck from a hose |
| Answer: | I am no longer selling myTekna |
| Question: | Is the syphon nipple 1/8” NPT |
| Answer: | Only the 400cc cup is compatible with the Fuji 9960 U-Tube conversion kit. The M-model spray gun can be converted into a bottom feed using a 1Qt cup assembly. |
| Question: | What is the diameter of this gun/ tube, would this be able to blow glitter and flakes? Glitter sizes .008" to .063", and flake sizes 1/16" and |
| Answer: | Only the 400cc cup is compatible with the Fuji 9960 U-Tube conversion kit. However, the M-model spray gun can be converted into a bottom feed with a 1 Qt. cup assembly. |
ENDOZER Mini HVLP Gravity Feed Touch Up Air Spray Guns for Paint with 0.8mm Nozzle 125CC
Product description
ENDOZER Mini HVLP Gravity Feed Touch Up Air Spray Gun with 0.8mm Nozzle 125CC
Launch Time: September 6, 2020
- HVLP design that saves paint material costs by reducing the amount of overspray
- Stainless steel needle and nozzle accommodate a variety of coatings
- Brass air cap and built-in 3 control knobs to adjust fluid, pattern and air
- Light weight, ergonomic design adn easy trigger pivot reduce operating fatigue
- Low nozzle air pressure makes for a more even coating of paint every single time with high atomization; air pressure: 50 PSI, air inlet: 1/4" NPS, and consumption: 8.8 CFM
