13 best auto paint gun
An auto paint gun, also known as a spray gun, is an essential tool used in automotive painting and refinishing processes. It is a device that atomizes paint and propels it onto a vehicle's surface in a controlled and uniform manner. Auto paint guns are an integral part of the automotive industry, used by professional painters, body shops, and even DIY enthusiasts for tasks like painting cars, motorcycles, trucks, and other vehicles.
Here are some key features and information about auto paint guns:
Types of Auto Paint Guns:
HVLP (High Volume Low Pressure) Guns: HVLP guns are popular in automotive painting because they use less air pressure, resulting in reduced overspray and better paint transfer efficiency. They are environmentally friendly and provide a high-quality finish.
Conventional Spray Guns: These guns use higher air pressure to atomize paint, which can result in more overspray compared to HVLP guns.They are often used for specialized applications.
Airless Spray Guns: Typically used for larger areas and industrial applications, airless spray guns do not rely on compressed air. Instead, they use high pressure to atomize and propel the paint.
Detail Spray Guns: Smaller and more precise, these guns are suitable for intricate painting tasks, such as touch-ups and detailing work.
Components of an Auto Paint Gun:
- Nozzle: The nozzle is responsible for controlling the flow of paint and the spray pattern's width.
- Fluid Tip: The fluid tip determines the size of the paint droplets and affects the quality of the finish.
- Air Cap: The air cap shapes the spray pattern and contributes to the atomization of paint.
- Trigger: The trigger controls the paint flow and allows the user to start and stop spraying.
- Air Regulator: This component regulates the air pressure to achieve the desired atomization.
Proper Techniques: Using an auto paint gun effectively requires skill and practice. Proper techniques such as maintaining the correct distance from the surface, maintaining a consistent speed, and overlapping passes are crucial to achieving a smooth and even coat of paint.
Safety Precautions: Automotive painting involves the use of paints and chemicals that can be hazardous if not handled correctly. Safety precautions, including wearing appropriate protective gear like masks and goggles and working in a well-ventilated area, are essential.
Maintenance: Regular maintenance of the paint gun is necessary to ensure its continued performance. Cleaning the gun thoroughly after each use and following manufacturer guidelines for maintenance is crucial.
Brand and Model Variations: There are various brands and models of auto paint guns available, each with its own set of features and capabilities. The choice of gun depends on the specific painting task and the preferences of the user.
In summary, auto paint guns are indispensable tools in the automotive industry, used for applying paint and achieving high-quality finishes on vehicles. Different types of paint guns are available, each with its own advantages and applications, and proper technique and maintenance are crucial for successful automotive painting.
Below you can find our editor's choice of the best auto paint gun on the marketProduct description
Auto Painting & Touch Up System Full size HVLP spray gun, 1. 3mm fluid tip Mini HVLP detail gun, 1. 0mm fluid tip Air adjusting valve 1. 8mm primer set-up Molded case, accessories
- Package Dimensions : 12.19 L X 30 W X 31.6 H (Cm)
- Made In Taiwan
- Product Type:Auto Accessory
- Package Weight: 2.53 Kilograms
User questions & answers
Question: | what size tips and needles will this come with |
Answer: | Auto Painting and Touch Up SystemFull size HVLP spray gun, 1.3mm fluid tipMini HVLP detail gun, 1.0mm fluid tipAir adjusting valve1.8mm primer set-up |
Question: | Is there a certain way to take off the fluid tips? Ive tried holding the trigger while untightening but the tips wont budge on either gun |
Answer: | Same problem, did come off but suspecting dried paint soaked briefly in lacquer thinner by putting several drops in where the cup screws on, point nozzle downwards. Be careful if you do put gun in vise, seems to me possible to break body with too much force sideways. Also lacquer thinner may compromise needle packing so not too much, point nozzle downwards leaving needle in place to keep things closed. Yeah, better wrench wil help, think it is 13mm. |
Question: | What is the CFM recommended for these guns |
Answer: | The recommended inlet air pressure for both the full size and touchup gun is 30 PSI, giving 10 PSI at the air cap on both guns. This pressure consumes 13 CFM on the full size gun and 8 CFM on the touchup gun. Everything you need to know to get started is on the first page of the included instructions. They recommend using a 5/16" ID or larger air hose. I would recommend a 3/8" ID hose as the hose and fittings are readily available. I've used these guns with as low as a 1 hp motor/40 gallon tank compressor but a larger capacity compressor gives an assured constant pressure and doesn't have to work so hard to keep up. All guns and paint types are different so I suggest that you get a piece of old sheet metal to get the feel of your guns and paint. I've got an old truck hood out back that I use regularly. Make sure you use a good regulator and moisture/contaminant trap. Let me know if you have any further questions! |
Question: | Whats the difference and purpose between the starting line and the finishing line |
Answer: | Starting line is an entry level, economic set. Finish line is made of better materials and designed to be a production gun, while the Starting line is good for hobbyist, occasional use. I have had a Starting line set for 8 years, painted approx. 50 cars, and they are still spraying like new. Keeping ANY paint gun cleaned and maintained will make a world of difference. |
Product description
Bang4Buck hvlp gravity spray gun set -auto Paint Primer-metal Flake with air regulator. Two years warranty.
Features :
-Stainless steel needle and nozzle accommodate a variety of coatings.
-Precise 1.4mm/1.7mm/2.5mm stainless steel needle and nozzle set.
-3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls.
-1000cc Aluminum Fluid Cup with Lid.
-Ideal for Full Atomization when Spraying Base-coats, Clear-coats, Single Stage and other Light to Medium Viscosity Materials.
Specifications:
Gravity type
Air Inlet: 1/4" + Barbed and Nitto Plug
Ready to connect hose or nitto socket
Nozzle size: 1.4mm, 1.7mm, 2.5mm
Operating pressure: 30-45 psi
Air consumption: 1.6-4 CFM
Compressor required: 2-3 HP
Gun dimensions (without cup): 15 x 18.5cm
1000mm Aluminum cup
Full Adjustment:
The desired pattern and fine atomization can be easily obtained by regulating the Pattern Adjusting Knob and Fluid Adjusting Knob.
-Pattern Adjustment: Turn the Pattern Adjusting Knob to the right until tight which will make spray pattern round, or turn left to make spray pattern ellipse.
-Fluid Adjustment:Turn the Fluid Adjusting Knob clockwise which will decrease the volume of fluid output and counter-clockwise will increase fluid output.
What’s in the package?
1 x Spray Gun
1 x 1.4mm Nozzle
1 x 1.7mm Nozzle
1 x 2.5mm Nozzle
1x True Micrometer Air Regulator with Gauge
1 x 1000cc Cup
1 x Barbed Tail
1 x Adjustment Wrench
- Package Include: 1 x Spray Gun; 1 x 1.4mm Nozzle; 1 x 1.7mm Nozzle; 1 x 2.5mm Nozzle; 1 x 1000cc Aluminum Cup(1L); 1x True Micrometer Air Regulator with Gauge; 1 x Barbed Tail; 1 x Adjustment Wrench
- This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting.
- It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications
- Light weight, ergonomic design and easy trigger pivot reduces operating fatigue.
- Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty.
User questions & answers
Question: | can someone tell me where the little rubber o ring fits. I just got sprayer, unscrewed small tip, then inside nosal ,and found shreaded o ring |
Answer: | The O ring goes on bottom of the threads around the tip. |
Question: | Is this one good to paint house and cars |
Answer: | Good for cars, house paint is typically too thick to go through this type of spray gun. A pressure feed spray gun setup would be more suitable for house paint. |
Question: | I bought the 1.4mm nozzle. Where can I find other nozzle sizes for this spray gun |
Answer: | While tips appear generic they are not all the same. Notice in the pictures that the air cap(silver cap on end) does NOT have a black ring between it and the gun. That means the needle is a different length(shorter). I found that most generic guns have a black plastic ring and they are what I would consider generic guns. This is one of the few I have found without the black ring. I have this gun and it is fine but I am having trouble finding a 2.0mm needle. I bought one and it didn't work but did work on another gun I have with the black ring. I also went and bought another gun with 1.4, 1.7 and 2.0 as well. Now I have a 1.4, 1.7 and 2.0 gun along with the 2.5 if I ever needed it. |
Question: | Will this gun spray latex paint without having to thin paint |
Answer: | No |
- HVLP Paint Technology: Adopted low pressure while painting. Provides optimal atomization and particle size of paint for an even spray. Use this Spray Gun Kit ,your work will be finished efficiently.
- Comes with 3 different-size nozzles, precise stainless steel needle and nozzle set accommodate a variety of coatings.Spray Base-coats, Clear-coats, Single Stages, Primers and More. Nozzle caliber: 1.0mm(green), 1.4mm(red), 1.8mm(blue).
- Produces an easy to clean and anodized finish, protected for high corrosion resistance and contain non-stick properties.
- Carrying Case: Equipped with a convenient carrying box, all parts are organized well and easy for you to take. You can take it to work wherever you go.
- Package Content: 3 Spray Guns with Cups, 1 Locking Air Regulator with Pressure Gauge, 3 Spanner Wrenches, 2 Cleaning Brushes, 5 Extra Filters, 2 Nuts, 2 Screws, 1 Manual.
User questions & answers
Question: | Can you stain with this product |
Answer: | Hello, the fiber side should be up and sticky side down. The fiber on top is infused in the asphalt material and will not burn. The "burning" you experienced may be due to over heating with the torch. If too much torching is applied a thin layer of asphalt material on top may "bubble up". This will not affect the asphalt bonding underneath and won't affect performance of the product. |
Question: | I want to use this for spraying wood furniture with latex paint. Will this work well |
Answer: | The side with the tape film goes up. |
Question: | Does set come with case shown in picture |
Answer: | I would just by a screw on propane torch from Harbor Freight for $20-$30 and get a 20# propane tank for a gas grill and use that. I think a small tank for soldering would not cover enough area, unless your cracks are very short. |
Product features
Product description
- Air Inlet: 1/4"
- Type of Feed: Gravity
- Diameter of Nozzle: 2.5mm
- Recommended Air Pressure: 29-50.7 PSI (2.0-3.5 BAR)
- Max. Pressure of Air: 90 PSI (6.2 BAR)
- Paint Capacity: 600L
- Average Air Consumption: 4.2-7.1 CMF (117-199 L/MIN)
- Pattern Width: 7.1"-9.84"
- A-weighted Sound Pressure Level: 74.5 dB(A)
- Sound Power Level: 85.5 dB(A)
- Weight: 40.57oz / 1150g
- Dimensions: (8.86 x 5.12 x 5.12)" / (22.5 x 13 x 13)cm (L x W x H)
ETOSHA HVLP Spray Gun Set
- Equipped with three control valves to get the perfect spray you need.
- The all steel body provides a wonderful rust resistant spray gun and stainless steel nozzle provides great durability.
- The set comes with a metal air gauge and regulator for you to know how much air pressure you are getting and includes cleaning brush and multi-size wrench for easy cleanup.
- Suitable for domestic and industrial primer, topcoat and detailing for automotive industry, equipment and furniture paint applications!
Product description
HVLP Spray gun set Specification
Type: HVLP
Size of 3pcs Fluid nozzles: 1.4mm, 1.7mm, 2mm
Cup Capacity 600CC
Package includes:
1PCS Spray Gun
3PCS Tips
1PCS Cup
1PCS Brush
1PCS Spanner
1PC Filter
Warm Notice:
Dear Customers, we sell 100% new product, if you received any product which looks like used and not new, please feel free to return it, we will send you replacement or refund you 100% payment. Thank you!!!
- This gravity Feed HVLP Spray Gun Kit with 3 fluid nozzles 1.4mm, 1.7mm, 2.0mm, for coatings and surface painting;
- This spray gun kit makes less overspray, do softer spraying;
- A perfect spray gun for basecoats, clearcoats and other high viscosity coatings spraying, it also can be used for Home domestic primer, industrial primer, topcoat and detailing for automotive cars, equipment / furniture painting etc.
- Comes with an organized storage paper box; Size of Fluid tips: 1.4mm, 1.7mm, 2mm; use water based paints;
- Material of the needle and nozzle is Stainless steel, durable, strong with longer service life;
User questions & answers
Question: | Can this gun be usee to apply solvent based paints |
Answer: | Well it does come with different tips you need a larger hole in the tip I spray lacquer |
Question: | where is this spray gun made |
Answer: | Not sure |
Question: | What type of compressor hose is needed |
Answer: | Standard 3/8 or 1/4 npt work for me. Usually 35 to 50 psi is all required. |
Question: | Where can I get a replacement O ring for the tips? Also there is no markings on the tips to see what size they are |
Answer: | They have whole sets of O-Rings at Amazon thats where I got them They come in a small case with all sorts of sizes handy for alot of thing |
Product description
Devilbiss StartingLine Topcoat & Priming Spray System Includes 1 Full Size (Basecoat, Clearcoat & Topcoat) HVLP Spray Gun & 1 Full Size (Priming) HVLP Spray Gun plus Accessories Excellent 2 Gun System that's perfect for the Do-It-Yourselfer! Kit Contains: 1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1. 3mm (Finish Coat) Fluid Tip & a 600cc (20 oz. ) Metal Cup. This 1. 3mm set-up is ideal for the Atomization of Basecoats, Clear Coats, & other Light Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume. 1. 5mm (Single Stage) Fluid Tip & Needle Use this 1. 5mm set-up for Single Stage, Primers, Sealers, & other Light to Medium Viscosity Coatings. 1 Full Size STARTINGLINE HVLP Gravity Feed Paint Spray Gun with a 1. 8mm (Priming) Fluid Tip & a 600cc (20 oz. ) Metal Cup This 1. 8mm set-up is ideal for the Atomization of Primers, Sealers, Thinned Latex/Oil Base, & other Medium to Heavy Viscosity Coatings. Spray Gun Specifications: 30 PSI inlet pressure delivers 10 PSI air cap pressure at 13 CFM air volume. Also Includes: Air Regulator with Gauge Gun Cleaning Brush Set Gun Maintenance Wrench Blow-Molded Storage & Carrying Case Includes 1 Year Limited . Spray Gun Rebuild Kits are available
- Auto Painting/Priming System
- Basecoat, Clearcoat and Topcoat Spray Gun
- Sealing and Priming Spray Gun
- This 2 Gun System is perfect for the Handyman, Craftsman, Hobbyist and the Do-It-Yourselfer!
- It allows you to Spray the Full Spectrum of Coatings for any size Project Large or Small.
User questions & answers
Question: | Does this work with dewalt dxcm271.com 27 gal. 200 psi portableair compressor |
Answer: | HVLP: High Volume (of paint) Low Pressure (of air). Anything that can give you a regular flow of 30 PSI will work as the regulator (the dial with the knob) will knock the pressure down to your target 25~30 PSI. It is nice (but not required) to have a large tank because you can spray longer without the annoying compressor going off. |
Question: | The 1.8 tip works well with urethane primer |
Answer: | Yes, the 1.8 tip is used for heavy paints like urethane primer. While the 1.4 is for more liquid paints and clear coat. |
Question: | What type of air compressor is need to operate this? Cost is an issue. I want to use it for painting furniture, not houses |
Answer: | They are automotive guns. For painting furniture I’d suggest just the cheap hvlp guns that come in the 3 pack. As far as the compressor goes harbor freight has a 26 gallon air compressor for around $150 that would work for what your wanting. Hope this help. Oh and pay attention to the cfm on the guns and compressor that you choose. |
Question: | is their a 1.4mm tip available, on amazon* for this kit |
Answer: | The kit cones with two guns. On as a 1.8 primer gun and one as a 1.3 paint gun. But there is a 1.5km needle and 1.5mm fluid nozzle to swap onto either gun. Other than that I do not know of getting a 1.4mms without going to a stand alone sata gun. |
- Spray the Full Spectrum of Coatings Using this Quality 3 Gun Set of High Performance HVLP Spray Guns. You Get All the Premium Features and Benefits, without the Premium Price!
- Spray Base-coats, Clear-coats, Single Stages, Primers and More. Guns Provide Fully Atomized Spray Patterns, So You Can Achieve Professional Finish Results.
- The 1.4 mm Fluid Tip Gun is Ideal for Base-coats, Clear-coats and other Light to Medium Viscosity Materials.
- The 1.8mm Fluid Tip Gun is excellent for Primers, Oil Base, Latex, and other Medium to Heavy Viscosity Coatings. Use the 1.0 mm Tip Detail Gun for Tight Areas and Touchup.
- Full One Year Warranty
User questions & answers
Question: | what are the lids made of on the paint cups |
Answer: | Plastic lids metal cups |
Question: | What size air compressor is required to operate these guns? Would a 21 gallon 125psi suffice? Do I need more gallons? More psi? for whole cars |
Answer: | These are high volume LOW PRESSURE sprayers. The key here is CFM flow that you can maintain. You don't want to spray 10 seconds then have to pause for the compressor to catch up. A 21 gallon compressor is childs play in this game. I doubt it would even handle a single panel. I would look into an OLD used 2-stage or a 80-gallon single stage. You can get them cheap for like $300-600. I personally own a Ingersoll Rand 60-Gal that puts out 15CFM. I bought it for $700 WITH TAX NEW from Sears Outlet. It was brand new on the crate never delivered; someone ordered it and never picked it up. This is a $1200 unit. Regardless, it kept up the pressure but it ran a lot when I was painting a Suburban (talk about some serious real estate to cover). |
Question: | What adapter would I use for the DeKups system and these guns? I purchased the 24oz for the two large and the 9 oz for the smaller gun |
Answer: | google dekups adapter tcp global they got a lot of them for devilbliss sharp etc didn't see any for this but u could contact them probably one from a sharp or other gun mite work not sure just lookem up and email or call them hope this helps god bless |
Question: | What ist he CFM requirement for this set |
Answer: | This 1.4 tip barely kept up with a 20 gal 4.4 CFM compressor set at 60 -70 psi. I would recommend a compressor with more HP and higher CFM at 90 PSI |
- Master Series HVLP Spray Gun: Master Pro 44 Series High Performance HVLP Spray Gun with 1.3mm Fluid Tip and a 1 liter Aluminum Cup. Comes with a high flow air pressure regulator with gauge. This 1.3 mm fluid tip set up is ideal for use with base coats, clear coats, single stage, primers and other light to medium viscosity paint coating materials.
- MASTER Performance: Our Master Pro Series spray guns are designed with the professional painter in mind. All gun components are made with exacting precision, so they provide the premium performance with all types automotive, industrial, and woodworking coatings.
- ADVANCED SuperIOR ATOMIZATION TECHNOLOGY: Achieve perfect performance with all paint coatings because of the innovative technology in this spray guns needle, nozzle and air cap system. Paint coatings are fully atomized with the ideal fan pattern, so that they lay down perfectly for a clean even basecoat or topcoat finish.
- Waterborne COMPATIBLE: Precision engineered high grade stainless steel components that are 100% suitable for the latest automotive waterborne paint coatings.
- Buy with confidence, if you're not satisfied with this spray gun at anytime within the first year of purchase, we'll provide a refund or replacement.
User questions & answers
Question: | Does anyone know what the CFM requirement is for this gun |
Answer: | Not sure what the exact cfm is, but I can say it uses ALOT of air. My educated guess is it is in the 12 cfm range. |
Question: | Does this regulator have glass face? Is it lacquer proof or will lacquer melt the plastic lens |
Answer: | I only clean with solvents (acetone) and the lens is still clear I never really checked it out to see if it is glass or plastic I always use dig.regulator I only used the one that came with the gun once and that was to play and test it out |
Question: | Where is the gun made? China? Taiwan |
Answer: | China |
Question: | Does anyone know what the CFM requirement is for this gun |
Answer: | Manual says 16.4 cfm but I feel it's less I have 80 gal 5hp compressor and no way to measure cfm. But I clear at 25 psi and lays out nice and compressor handles it pretty consistent. Used at work with 120 gal compressor feels just the same as home. |
Product description
Specification:
Air Inlet: 1/4 inch
Cup Material: PVC
Color:Green & Silver
Cup Capacity: 600cc
Air Consumption: 14.5CFM
Operating Pressure: 2-3.5 bar
Pattern Width: 160-240mm
Hopper Size: 10CM Diameter
Type:High Volume Low Pressure
Fluid Nozzle: 1.4mm, 1.7mm, 2.0mm
Spray Gun Material: Aluminum Alloy
Precautions for use
1.Before spraying for the first time, clean the cavity. Add thinner to the gun pot and try to filter the inside of the spray gun to ensure cleanliness.
2.After each use, clean the air cap and nozzle in time (pour out the paint in the cavity first, then add the thinner and shake the spray gun while holding the trigger to try to let the paint produced inside the spray gun spray out)
If the air cap is too dirty, soak the thinner for a while before cleaning. Be careful not to damage the holes on the air cap when cleaning, remember to protect the nozzle, otherwise it will affect the atomization effect.
3.If the range of product spray becomes smaller or becomes "spitting" after long use, the problem may be:
First, there is not enough paint in the paint container to cover the lower entrance evenly. It is recommended to try after filling up with paint.
4.If the product's paint container leaks, please remove the paint container, clean it, and reinstall it. The problem can be solved.
Package:
1 x Spray Gun
1 x 600cc Cup
3 x Nozzles
3 x Needles
The given wrench may not be suitable. Please provide your own removal tool.
- 100% BRAND NEW - Aluminum Alloy Body With Chrome Plating For Ease Of Clean Up And Durability.
- EASY TO CLEAN - Mesh Filter Removes Dirt Particles From paint,Preventing Defects. Stainless steel needles and nozzles are compatible with water based paints.
- ENVIRONMENTALLY FRIENDLY DESIGN - Adjustable fluid, pattern and air controls. Designed to provide equal atomization and particle size for all kinds of surface painting. Saves 20% paint and provides optimal performance.
- HUMANIZED CONSIDERATION - Special conical shape of air cap prevents paint from splashing. Mesh filter removes dirt particles from paint, preventing defects. 600cc PVC cup allows viewing of paint fluid level and save time on loading. Copper diverter valve for good air sealing performance.
- 100% SATISFIED GUARANTEE - We offer 90 days free warranty, customers can rest assured that the use of, if the product is damaged or can not be used, the customer can contact us, we will provide customers with satisfactory solutions.
Product description
Wagner 0529031 MotoCoat Complete Car & Truck Paint Sprayer, 39' Hose
- AUTOMOTIVE CUSTOMIZING SPRAY GUN: Use the Moto Coat Complete Sprayer to apply low flashpoint coatings on your car exterior, truck bed, recreational vehicle, trailer and more
- APPLIES PROTECTIVE AND DECORATIVE COATINGS: Applies everything from heavy truck bed coatings and undercoating to light materials such as rubberized peelable coating and auto finishing paints
- TWO NOZZLES INCLUDED: The Detail Finish Nozzle applies a smooth, even coat on your automobile surface while the iSpray Nozzle can be used for a thicker, textured coat on truck beds and undercarriages
- ADJUSTABLE SETTINGS CREATE IDEAL FINISH: Adjustability such as material volume flow, pattern direction and width allow for precise spraying on your vehicle
- PORTABLE PAINT SPRAYER: The self-contained sprayer features a spark contained motor and 39 ft. hose, allowing you to safely and easily move around your project
User questions & answers
Question: | I saw one person used it for chassis saver. Has anyone else used it? How much did you dilute? Did the sprayer clean up okay |
Answer: | I think it would be perfect for that application, Clean up was very easy. |
Question: | Can it work with normal car paint |
Answer: | Yes, it'll work with one stage and two stage paint. (Polyurethane mix) |
Question: | What would be the easiest way to use this with plastidip? Spray multiple thin coats or a couple thick coats |
Answer: | First coat is a light coat, 50% overlap, the coats after that should be thick enough for even coverage without running, continuing with the 50% overlap. The more coats you do the better it will protect and also it will peel off a lot easier if it has multiple layers. If you are masking off a portion of the car that will have a tap line instead of a panel break then you will want to remove the tap while the final coat is still wet. It will help prevent the tape from peeling back your coat of plasti-dip. Watch tutorials from dip-your-car on YouTube, he uses a different gun but it's pretty much the same. He has really helpful videos. |
Question: | Can i use this with plastidip |
Answer: | That's an interesting question. Th bed coating I used is thick, but not as thick as plastidip. I would say not, but I am guessing. I have also used it to spray elastomeric roof coatings, and it handled that fine. |
Product features
The MotoCoat Complete
The Wagner MotoCoat Sprayer is designed for DIY auto enthusiasts and installers, it will safely apply low flash-point coatings like protective materials and customizing coatings. It is the safest self-contained sprayer available with a spark-contained motor and 39’ hose. With low overspray and simple adjustable controls a perfect finish is easy to accomplish.
The MotoCoat Complete sprayer applies a wide variety of coatings including heavy truck bed coatings and undercoating, and light materials like rubberized peelable coatings and auto finishing paints. The sprayer is a self-contained system with a turbine base generating the air power flowing through the hose to the spray guns. Two spray guns are provided one with the innovative iSpray nozzle and the Detain Finish nozzle.
The spark contained X-Boost Turbine base provides great atomization and the portable power for painting anywhere without the need for a compressor. The high volume low pressure technology provides the power to generate a desired finish with superior control. It has a high and low setting to match power needed for the material being sprayed.
The two spray guns provide versatility for the various auto and motor vehicle projects requiring coating. The iSpray gun is designed with an innovative nozzle to break up thick coatings to create a textured finish and full pattern perfect for spraying truck beds, undercarriages, and any uneven surface. The Detail Finish nozzle and cup attachment sprays thin materials with an even coverage and smooth finish. Adjustability such as material volume flow and pattern direction and width allow for precise spraying for beginners to experts. These gun and cup attachments are both easy to disassemble and clean with water or mineral spirit solutions.
- TCP Global Brand High Performance HVLP Spray Gun with a 1.3 mm Fluid Tip, 1 Liter Aluminum Cup and a Air Regulator
- The 1.3 mm Fluid Tip is Ideal for Optimal Atomizing when Spraying Base-coats, Clear-coats and other Light to Medium Viscosity Materials.
- Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. Contains a Stainless Steel Needle and Nozzle Set.
- Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish!
- Full One Year Warranty
User questions & answers
Question: | can I get replacement tips |
Answer: | Yes you can - https://tcpglobal.com/collections/spray-gun-repair-kits These are freakin Awesome guns for the price!! I used to own a body and paint shop years back and now use these guns for my person home jobs and they are perfect |
Question: | how much psi do you regulate when trigger is pressed all the way..around what psi should it be set at |
Answer: | i set mine at 35 max |
Question: | What size of air hose do i need for this gun? Im sorry for the dumb question, I’m new in this |
Answer: | Good question. Youll need a 3/8 air hose for best results. This is a cery good spray gun for the price. |
Question: | Will this give anything close to "show car" coating that a 1.2mm will provide |
Answer: | First when painting a car a lot of getting "show car " coating depends on how well the car was prepared before you even pick up the spray gun for the finish coat .The best gun in the world can not cover up a bad prep job . Second it depends on the quality and what type of paint you are spraying . Third it depends on reading and understanding all the information in regard to reducers/thinners , to hot or to cold ect. Fourth it depends on your experience , it takes a certain level of skill that only comes from practice . Last this spray gun added to the above will give you the coating you are after . For the price they are asking you get a lot of bang for the buck . Top price does not always mean top gun . Hope this information helps as much as possible |
Product description
DESCRIPTION:
The DYNASTUS HVLP gravity-feed spray gun is perfect for spraying oil-based or latex paints, suitable for medium to large size painting jobs in a wide variety of automotive, home, and furniture applications. This spray gun requires 7-12CFM / 3HP compressor, and delivers an adjustable pattern of up to 11 inches and handles lacquer, enamel, stain, primer and urethane. The anti-drip canister helps minimize cleanup.
Kit include:
Air regulator: Working with paint and air requires precision to achieve quality results Extra spanner: Dismantling and installing a spray gun for cleaning
Wire Brush: For cleaning painter nozzle
Handle Tooth Brush: For cleaning paint cup
Filter Funnel - 100 Mesh, stainless steel net: When spraying latex paint, it is recommended to use the filter funnel
Quick Coupler Plug- 1/4-Inch NPT female thread
- Suitable for spraying oil-based or latex paints. With the 2.5mm nozzle and 1 quart aluminum cup, enables you to spray thicker paints such as polyester primers, thick enamels, latex paints and gel coats, and allows you to spray larger surfaces without having to stop
- Filter ensures clean paint and air regulator allows you to have precise air control, helping you get the optimal atomization. The stainless steel needles and precision machined air caps, give you a fully atomized and consistent spray pattern for a smooth professional finish
- HVLP technology provides high material transfer efficiency, eliminates paint waste and requires lower air volume, so you never have to worry about making a mess or wasting paint
- Built-in 3 ergonomic anodized knobs are perfect for precise control: fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow
- Produces an easy to clean and anodized finish, protected for high corrosion resistance and contain non-stick properties
User questions & answers
Question: | I was going to dismantle and clean this gun prior to first use. I cannot seem to get the nozzle unscrewed. It does remove, right |
Answer: | Mine removes just as any other HVLP gun would, make sure youre turning the big grooved ring and not just the tip. |
Question: | Availabily and place to purchase extra needles and fluid nozzles |
Answer: | It is not equipped at present, but it will be available soon. If there are no special requirements for other brands of nozzles on Amazon, most of them are suitable for our paint gun. |
Question: | Does it have everything to connect to my air compressor |
Answer: | You need an air hose with 1/4 inch quick coupling |
Question: | Is this a good sprayer for spraying residential walls? I plan to specifically use this for spraying ship lap |
Answer: | This would be very slow at spraying latex paint (or anything thicker) on walls. If you're spraying a lacquer or other much thinner finish it may work well though. If you're spraying latex paint, look for an airless sprayer instead - Home Depot has a couple good brands. Haven't shopped for them here myself though. |
Product features
Spray Pattern Control
Each time you are getting ready to use your gun, you will need to set it up. Start by taping a piece of masking paper on your wall for your spray test.
●Built-in 3 ergonomic anodized knobs are perfect for precise control.
Air Flow Adjusting
Regulator allows you to set and adjust air flow for each specific paint application, ensures the optimal atomization and cost savings.
●Air Adjustment Range: 0 to 140 psi (1 to 10 bar) ●Air Inlet and Outlet: 1/4" NPT
Paint Filtering
In the painting process effective paint filter recommended to reduce any small pieces of dried paint or pollutant in the fluids to ensure a perfect finish. Debris can fall off a paint can lid into your mixture, but the filter stops this.
●Dirt, sand and dried clumps of paint can ruin spray guns.
Easy to Cleaning
All internal passages are anodized and the mirror polished body, and comes complete with a cleaning brush set, makes it easy to cleanup
●Clean the spray gun immediately after every use. ●Delayed or inadequate cleaning will permanently clog the spray gun.
- MPS Master Paint System Disposable Paint Spray Gun Cup Liners and Lid System, 25 Pack Large Size 27 ounce (800ml) Kit. Kit includes 25 cup liners with a 27 ounce (800ml) fluid capacity, 25 lids with built-in 125-micron fluid strainers, 1 hard cup with retainer ring and 10 cup sealing plugs.
- The MPS disposable spray gun cup system's outer hard cup connectors are compatible to work with, and twist-lock onto all original styles of 3M PPS legacy series spray gun adapters. MPS cannot be used with the new 3M PPS 2.0 series spray gun adapters. Master Pro 44 Series HVLP Spray Gun Models require the MAS MPS-881 spray gun adapter. The proper adapter will allow you to use the MPS disposable cup system with almost any brand of spray guns.
- Master Spray Guns, MPS disposable cup system works excellent with all types of paints, primers, epoxies, and commercial coatings. Use the cup system with automotive paint basecoats, clearcoats, topcoats and primers, as well as with stains, sealers, gel coats, varnishes, urethanes, enamels, and lacquers.
- Dramatically increase your spraying efficiency and overall productivity by saving time, labor, waste, and money by using the MPS disposable cup system! Reduce your paint material waste and cleaning solvent waste, while at the same time eliminating the cost and labor associated with cleaning traditional metal gun cups and the need for mixing cups and paint cans.
- Everything you need to achieve incredibly fast and professional paint finishing results. All components of the professional MPS disposable spray gun cup systems are available both individually and in sets and kits.
User questions & answers
Question: | Will this work with an apollo series 7500 and 7700 series hvlp gun |
Answer: | Its made for a 3M PPS (not series 2.0). If there is an adapter, I should fit. I use them with a 3M HVLP. |
Question: | Will this adapter fit spectrum hte paint gun |
Answer: | Sure |
Question: | Is there an adapter for a siphon feed gun |
Answer: | As far as I know their is no adapter for that type gun , you half too have a tube that goes to the bottom of the cup to suck the paint out of the paint cup |
Question: | How do I buy the adapter |
Answer: | Any auto body store should have them,I ordered mine on line but try will only work on PPS not the 2.0 PPS |
- 【3 Spray Patterns & 5 Nozzle Sizes】Paint sprayer can be adjusted to 3 different spray patterns: horizontal, vertical and circular, and equipped with 5 size nozzles(1.2mm/ 1.5mm/ 1.8mm/ 2.5mm/ 3.0mm) for any painting projects, such as furniture, cars, fences, interior walls, garage doors, garden tables and chairs etc.
- 【Perfect Design For User Experience】Detachable, making it easier to use and clean; the paint output can be controled by adjusting the flow control knob on the sprayer to obtain different paint output; The 6.6ft power cord is long enough to allow you to move freely within a larger work area; Upgrade 700W to make your spraying project more extensive.
- 【High-Quality Materials】Using copper nozzles can withstand pressure more than plastic nozzles, and is less prone to clogging. It can also make the spraying surface more concentrated and more uniform. The use of double-layer insulation materials allows you to avoid worrying about any safety issues during operation.
- 【Powerful Upgrade Advantages】The rear foam pad can prevent paint from flowing backwards, block the nozzle, and make the spray more uniform; it also has dust and moisture resistance functions, which can not only extend the life of the motor, but also ensure the purity and effect of spray color; All-copper high-power motor, powerful spray and more durable.
- 【Package Contents】1X Paint Sprayer, 1X 1000 ml Container, 5X Size Nozzles, 1X Viscosity Cup , 1X Nozzle Cleaning Needle, 1X Cleaning Brush, 1X Spanner, 1X Lid Pot, 1X User Manual. If you have any questions, please contact us via your order, our technical team and after-sales team are always behind you.
User questions & answers
Question: | What type of filter do you use for this sprayer |
Answer: | I don’t believe I saw filter for this sprayer when I first used it, take a look I could be wrong. |
Question: | How about using paint sprayer to remodel my kitchen cabinet |
Answer: | So glad I got this to remodel my kitchen cabinets. It's very easy to use and the cabinets have flawless and professional finish. Return my cabinet to the state I just bought. |
Question: | How should I dilute my latex wall paint with water? how do i avoid over-diluting an expensive can of paint. I need help |
Answer: | Pore a small amount of holes in the cup and mix in a small amount of water at the beginning. The sprayer should be equipped with a funnel. Pour it into the paint. You can try to make a small amount paint as long as you need. I did this, but I don’t know if it is suitable for your paint . |
Question: | Can I use latex paint |
Answer: | This kind of paint is a bit complicated, but it can be used. Many customers have responded with no problem, but it must be diluted. If you need to use latex paint on a large area, I recommend buying an airless paint sprayer. |
Product features
TECHNICAL DATA:
Model: YT-201-A
Voltage: 110V / 60Hz
Power consumption: 700W
Container capacity: 1000 ml
Nozzle size: 1.2, 1.5, 1.8, 2.0. 2.5, 3.0 mm
Max flow: 1000 ml/min
Max viscosity: 100 DIN-s
Power cord: 2m / 6.5ft
3 Spray Patterns
- Three different types of spray patterns by simply adjusting the location of air cap: Horizontal-Vertical-Circular.
- Dot shape is suitable for sides, corners; Vertical shape is suitable for horizontal object surface; Horizontal shape is suitable for vertical object surface.
5 Copper Nozzles Size
- More options, and suitable for more occasions and projects.
- Compared with plastic nozzles, 5 copper nozzles can make the sprayer have better durability and not easy to block, anti-corrosion and can reduce resistance and maintain good operating temperature and extend motor life.
Adjustable Flow Control
- By adjusting the flow knob to control the coating speed and the flow rate of the project size, you can achieve precise paint work.
- With a maximum flow rate of 1000ml / min, it is suitable for edges, corners and wide inner / outer surfaces of various work and DIY projects.
Pure copper motor & Heat dissipation
- Pure copper 700W high power motor, strong power, large air volume, stable output, better atomization; even and fine spraying, strong adhesion.
- Intake dustproof design, to protect the motor and prevent dust intrusion; efficient heat dissipation, extend the life of the motor.
Wood Products
- For chair, table, shutter, cabinets, wooden artwork, DIY etc.
- Note: The smaller the size, the finer and the higher the surface quality.
Steel and iron products
- For car, bicycle, model, railings, heating pipes, window frames, boats, garage doors, metal garden fences etc.
Interior / Exterior Walls
- For internal wall, external walls, outdoor floors etc.
Garden Projects
- For yard furniture, wooden garden fences, wooden pile, corridor etc.
Warm Tips:
1. Before using, please choose proper copper nozzle, spray patterns. Check if you have tighten up the container and paint tube; In addition, we recommend that you test on cardboard or wooden boards before spraying important items, such as walls or furniture.
2. Please add some water(or paint thinner) to dilute the paint and stir to ensure that your paint passes smoothly through the viscosity cup within 100 seconds and meets your requirements.
3. After finishing spraying put the corresponding thinner in the container, then install the container on the product, and perform a similar operation as spraying to properly clean the container (The purpose is to clean the remaining paint in the containers, pipes and nozzles). Then remove the container and clean.
4. Please wash the sprayer gun immediately with the brush. All parts of the paint sprayer are detachable.
5. Most importantly, please read the product user manual carefully before using it.
Latest Reviews
View all
Printers That Work With Iphone
- Updated: 12.04.2023
- Read reviews

Acdelco Cordless Drills
- Updated: 30.05.2023
- Read reviews

Grde Backup Battery Chargers
- Updated: 28.02.2023
- Read reviews

Hepa Bags
- Updated: 15.07.2023
- Read reviews

Onkyo Speakers
- Updated: 10.05.2023
- Read reviews