13 best rv levelings

• LEVEL YOUR CAMPER, RV, OR TRAILER IN 5 MINUTES OR LESS WITH THE BEST LEVELER KIT ON THE MARKET! Are you ready to experience the BEST levelers for your RV? Level your camper, RV, or Trailer on the FIRST TRY by simply driving on until level. Chock. Done. Nothing is easier to use than the innovative Andersen Hitches Camper Leveler Kit. You’ll literally be ready to roast hot dogs, s’mores, or head out to go hiking or fishing in 5 minutes or less!
• EXPERIENCE THE ONLY ON-THE-FLY, PRECISE CAMPER LEVELING SYSTEM AT ANY INCREMENT BETWEEN 1/2" AND 4" (LIFTS UP TO 4") RIGHT FROM THE DRIVER’S SEAT. AVOID THE HASSLE, HEADACHE, AND WASTED CAMPGROUND TIME OF SETTING UP YOUR RV OR CAMPER WITH BLOCKS AND PLANKS. Don't get in and out of the driver's seat and/or make your spouse or significant other drag blocks or heavy planks around…. and stop worrying about a plank flying out at someone’s shin - or head!
• THE CAMPER LEVELER WORKS PERFECTLY ON ANY TRAILER UP TO 30,000 LBS & WITH TIRES UP TO 32" DIAMETER. IF YOUR RV MEETS THESE REQUIREMENTS, YOU’LL BE ABLE TO USE THE ANDERSEN CAMPER LEVELING SYSTEM RIGHT OUT OF THE BOX! If you have dual tires or smaller spaces to fit the camper leveler between, sometimes they need trimmed. This is simple and easy to do and takes less than 10 minutes. If you buy the camper levelers and they don’t work for you, we’ll take them back and give you a refund!
• YOU ONLY NEED ONE LEVELER PER AXLE ON ONE SIDE OF THE TRAILER. With the Andersen Camper Leveler, you don't need to level both sides of the trailer - only put them on the low side.
• MAKES THE PERFECT GIFT!!! ARE YOU READY TO GET STARTED ENJOYING YOUR FIRST DAY OF CAMP INSTEAD OF STRUGGLING THROUGH SET-UP? SIMPLY CLICK THE YELLOW ADD TO CART BUTTON AND CHECKOUT NOW. YOU’RE ONLY ONE BUTTON AWAY!

User questions & answers

Question:	Can you stack two of these together to use similar to the rapid jack 3620 product? Perhaps putting the rubber mat between the two
Answer:	When we tried to use this on the passenger side trailer tire, it slipped and caused the whole trailer to slide backwards and Jack came off the chocks. Hot mess!!! We ended up going to Tractor Supply for heavy rubber chocks. They work great and were much cheaper. These Andersons are pretty light and not worth the money. Just our experience.
Question:	Does the anderson rv levels, come as a set or separate for each one. thanks
Answer:	It takes the two items pictured to chock one wheel. I purchased a double set so both tires would be chocked on the side needing to be raised. I have been very happy with this purchase.
Question:	I want to use on a motorhome. Axle weights are under 30K, can I use this product
Answer:	The Camper Levelers work great on motorhomes up to 30K pounds. There are a lot of people using the Camper Levelers on their motorhomes with a lot of success. The Camper Levelers have a lifetime warranty. If it ever breaks, Andersen Hitches would replace it.
Question:	How wide are the leveler? They look pretty narrow in the picture
Answer:	6" , I thought so in pictures also , Heavy and seem to be pretty sturdy. Haven't had a chance to use them yet but they were recommended to me.

Product features

Step One:

Push the skinny end of the camper leveler right into the tire as far as you can push it. Make sure it is really tight. Be sure to do this with all camper levelers you are using!

Step 2:

Using a bubble level (or whatever means you have) to determine when you are level, have one person driving and the other watching the level.

Tip: It's helpful to put your truck in low 4-wheel drive and take it slow!

The driver slowly drives onto the levelers, and the person who is watching the level hollers when the trailer is level.

Some people use walkie-talkies to communicate when the trailer is level. It's also possible to do this yourself if you have a level on your trailer big enough to see in your rearview mirror.

Step 3:

If you can, you should go just a TINY bit past when you are level so that when your truck settles you'll be just right! Stop, chock... and you're done!

Andersen Camper Leveler Kit

How do you use the Andersen Camper Leveler? It's easy! Simply drive on until level, chock... and done!

COMMON QUESTIONS AND ANSWERS:

1. What is the minimum distance between wheels that is needed for the levelers to fit? An approximate distance for most standard tires is around 2" to 3".
2. What happens if I order the levelers and they don't fit? Are there any other solutions besides sending them back? You can trim the levelers. You will receive an emailed guide. You can trim up to 4" off with no adverse effect.
3. Everything on your listing seems to say theses are for trailers or campers. Will they work with my RV? It's a Class C with a GVWR of 11,000. Yes, Camper Levelers will work with RVs, but what's your tire size? The radius of our Camper Leveler is around 15"-16", which translates into a perfect curve for tires up to about 31"- 32". Once the tire size goes past that, there will be some space under the middle of the tire that creates downward pressure on each end of the Camper Levelers (see photo on right). If your tires are spaced at least 2-3" apart and are no bigger than 32" diameter, they should work great for you!

• On/off switch provides complete control over battery life
• Entirely redesigned smartphone app with great new features
• Drastically reduces setup time--works with RVs, travel trailers, and 5th wheels.
• Enables dynamic site evaluation before you park; accurate to 0.1 degrees.
• Smartphone/tablet are not included with product.

User questions & answers

Question:	Can this be installed in the front storage compartment of a 5th wheel or should it be install inside the 5 th wheel
Answer:	We mounted ours inside the cupboard over the table because that was the most center of our 5th wheel. You could probably put it up in the storage compartment as long as the 5th wheel is level when you do that and that it's the center of your trailer.
Question:	Will this also work for a driveablke mnotorhome
Answer:	I don't see why not. It is a leveling device.I think it will work perfectly.
Question:	Are you selling/shipping the 2nd generation with on/off switch? it says that you are shipping but want to be sure i am purchasing the gen
Answer:	I have 1st gen and argued with their support for while about it not having an on/off switch. They made the statement that the average RV only travels once or twice a year. I explained that the folks willing to fork out this kind of money for this single function might be traveling weekly or daily. PUT A SWITCH ON IT!!!! Now, they have agreed with me and others, I suppose. For those with Gen1, I would suggest what I'm going to do...1) Get a 15 cent micro switch and install it on the cover. 2) Get a 3v cell battery (not a button....the larger types you might find in a garage remote or something. With some small wires, tape, whatever you need, wire in the switch and bigger battery. Should run as well if not better than the gen 2 if you have a much higher capacity battery.
Question:	The book says to calibrate with the slideouts deployed. Yet elsewhere it suggests keeping the slideouts in. Are the slideouts supposed to be retract
Answer:	The slide outs should be extended when initially leveling the RV during setup. Before completing the Set Level step, the slide outs should be retracted. This causes the LevelMatePRO to record the slightly off level position with the slides in as the level point. This is needed because you do the leveling with the slides in. Once you use the LevelMatePRO to level with the slides in, when you put the slides out you should be back at the point you were at when you did the initial leveling during the setup process

Product features

Towable Leveling Simplified

LevelMatePRO simplifies a procedure that has traditionally required a lot of time and guesswork. Eliminating the trial and error approach, you can simply level your trailer using the height indicated, and when hit green zeros, you’re done.

Driveable Leveling Perfected

The LevelMatePRO can display leveling information from a top view which displays the height required for each wheel to reach a perfectly level position. Simply stack your leveling blocks for each wheel at the height indicated, drive up once and level your vehicle on the first try.

Reconnect With Ease

A LevelMatePRO feature loved by users with towable vehicles, the ability to save and recall the hitch position saves time and simplifies the reconnection proccess. Eliminating multiple trips in an out of your tow vehicle at a time when you are ready to get down the road…priceless.

Upgradability

The LevelMatePRO is a dynamic product. Since it uses an iOS or Android smartphone or tablet app that you download from the app store, we will continually add more functionality and enhance the product at any time by simply updating the app.

Product description

Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks are available in a ten block set and a four block build up set. Patented. Each set comes in a convenient storage bag.

• 10 interlocking blocks stack to the desired height for safe and easy leveling
• Strong and durable construction
• Solid bottom to help keep them from sinking in soft ground
• Includes zippered storage bag with handle
• Each leveling block measures 8.5 inch x 8.5 inch x 1 inch

User questions & answers

Question:	How sturdy are these? i have a class b rv that weighs about 9500 lbs dry (only 4 wheels). i used plastic block levelers from campingworld and they broke in their first use
Answer:	This is my second set of these blocks (because I needed more to level on steep incline) only one of the first ten has failed and that's because i did line it up with the jack. My class A Rv weighs 22000 dry they have served me well for 6 months
Question:	What's the difference between Camco 44512 and 44505 models
Answer:	44505 is our leveling blocks. 44512 is our Fasten Leveling Blocks with T-Handle. You can give us a call at 800-334-2004 if we can be of further assistance. Thanks.
Question:	What is the weight limit for these Camco blocks? For the Camco Trileveler it is only 4000 lbs
Answer:	I've used them used under the wheels of some rather large class A motorhomes. What destroys them is if they start to slide when you drive onto them. You have to orient them like a staircase so that you are not attempting to "climb" more than the thickness of "one block per step". Rough, rocky ground can also damage them. In many situations, you'll need more than just 10 blocks. If you really want to be prepared, get 20, or even 30 blocks (two or three 10-pks.) If you use them under the rear of a motorhome that has duals, you need separate "staircases" of blocks for inner/outer wheels, because the blocks are not wide enough to support both inner and outer wheels on the width of a single block.
Question:	What are the dimensions of each block
Answer:	8 1/2 x 8 1/2 x 1 Warning: The 10 answers you will find here all have one thing in common, none of them had a clue but decided to added a few inches here and there. If you can't scroll down the description to find the dimensions, maybe it's time to put your mouse pad away for the winter.

Product features

Interlocking Leveling Blocks

The Camco Leveling Block 10-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

Camco’s RV Leveling Blocks make it easy to customize your levels. Simply stack the interlocking blocks together to your desired height. They have a strong, durable construction and a solid bottom to help keep them from sinking into the ground.

Engineered with a patented design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground.

Camco's RV Leveling Blocks measure 8.5 inch x 8.5 inch and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Product includes a zippered storage bag with handle to keep them all together when not being used.

Easy to drive on and off

Bright yellow blocks are highly visible

Solid bottom resists sinking

Zippered carrying bag fits all 10 blocks

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product description

Eaz-Lift's Olympian 24" Scissor Jacks fit pop-ups, trailers and other large vehicles. They allow for either bolt-on or weld-on installation. The scissor jacks have a certified 7500 lb. load capacity and are constructed of heavy-duty steel and powder-coated for maximum rust protection. Comes as a set of two. Measures 4-3/8-inches high when fully collapsed and 23-3/4-inches when fully extended.

• Effortlessly Stabilizes RVs: Scissor jacks have a certified 7500 lb. load capacity
• Easy to Install: Allows either bolt-on or weld-on installation
• Adjustable Height: Can be adjusted from 4-3/8-inches high to 23-3/4-inches
• Includes: scissor jacks and scissor jack socket for power drill
• Supports a Variety of Vehicles: Designed to support pop-ups, trailers and other large vehicles. Durable Construction: Made of heavy-duty steel and powder-coated to resist corrosion and rust

User questions & answers

Question:	Can anyone tell me about the life of this lift? I want to make a standup desk and i will be constantly cranking it
Answer:	only had 2 months but have used them to on a travel trailer about 20 times and it ways 2500ilbs and i use a cordless drill to do it
Question:	how much weight can they hold
Answer:	I'm using both of mine under 3k pounds of load, they are rated for 7500 pounds a piece
Question:	Does the socket or a handle come with the jacks
Answer:	Purchased in July 2018. Did NOT come with a handle or socket.
Question:	will a 3/4 inch socket fit the crank nut
Answer:	yes it will fit 3/4 inch.

Product description

Lynx Recreational Vehicle Leveling Kit. Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The levelers can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks. 8-1/2 inch x 8-1/2 inch with 1-1/2 inch thickness to give 1 inch lift. The 10 pack comes in an easy to store nylon bag and weighs less than ten pounds.

• Lynx Recreational Vehicle Leveling Kit, 10/Pack
• Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight
• To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack
• The levelers can also be used as a support base for other stabilizing equipment

User questions & answers

Question:	I have a 30,000 lb. motorhome and wonder what is the best product for putting under leveling jacks
Answer:	My Class A motorhome has a GVW of 26,000 pounds and I've used the Lynx leveling blocks and caps under my rear hydraulic leveling jacks, where most of the weight is, without a problem.
Question:	Is this made in USA
Answer:	Yes, they are made in the USA
Question:	This 10 pack results in 3 inches of lift, correct? (Can't find that detail on this Amazon page
Answer:	By the way, the full 4-3-2-1 arrangement will give you about 4.5" of lift. You would need all 20 from 2 sets, and not have enough land to build in the center. To get 4 levels under each wheel, you would have to place all 20 from 2 sets, pulling forward and backward a few times, while you build each stack. We've never needed more than 3 levels.
Question:	How are these for use on dirt/gravel/grass un-level ground (campsite)? I would be using these in campgrounds to drive my 81 VW Vanagon up on
Answer:	These are specifically made for unlevel conditions. The only concern is you have to watch the gravel. You don't want big chunky rocks under these. I had to buy two kits as one wasn't enough. I use them on a 12k Lb tandem axle 38 ft 5th wheel. Takes 3 under each wheel for me just for starters then one under the landing gear and rear stabilizers. That's 16 and gives me 4 more to add to the low side. If the campsite it any more out of level then that I don't want to park there anyhow.

Product features

Lynx Leveler - RV Leveling Blocks

Lynx Levelers provide a safe and easy way to level most vehicles.

10 Year Warranty

The best just got better. Now you can easily register your Lynx Levelers on our website and stay level for longer than ever.

The Original RV Leveling System

Tri-Lynx has been providing RV leveling systems and RV accessories since 1993.

Products Designed With the User in Mind

Lynx Levelers interlock, easily store and come with a tough nylon storage bag.

Made in the USA

All Lynx Levelers are manufactured in America. Look for the Orange... Look for Lynx.

• 🚚🚛 Solid Construction--Kohree leveler is built with strong fiber and a very high-performance nylon polymer used normally in mechanical load-bearing. That's to say, it is strong enough to withstand the great weight and endure extreme sun exposure hence lasts long.
• 🚚🚛 Non-Slip Design--This camping accessories come with two curved levelers and two blocks. Both have processed slight anti-slip lines on outer surface to enhance friction. The non-slip mats prevent the leveler sliding when supporting the camper tire onto the leveler.
• 🚚🚛 Easy to use-- With Kohree Camper Leveler Kit, you are done leveling your RV in less than 5 minutes and up for some roasting. Simply drive on it until on the level then chock! There is no need to get out of the driver’s seat or have someone drag block and planks around to achieve a level.
• 🚚🚛Flexible for Use--Accommodates a vehicle up to 30,000 lbs and tires up to 32 inches diameter. Up to 4 inches can be cut from the leveler without any contrary effects to fit the dual axle RVs, which gives the user some control over this process.
• 🚚🚛 Additional Rapid Jack--Innovative leveling blocks. Put the post- hole underneath the jack, then it can be used as a post block, easily lifting your flat tire off the ground safely and automatically. ※Maximum load weight: 2000lbs

Product features

Kohree 2 Packs Camper Leveler

Complete set. Include all the kits you need to level their RV when camping on uneven ground. It even offers a height adjustment range up to four inches, which gives the user some control over this process.

With this innovative Camper Leveler, you can level your RV or trailer on the FIRST try--No more guesswork! No more hassle!

Simply Drive On. Chock. Done.

Enhanced Anti-Slip Design

--Non-slip surface was a nice touch and should make sure everything goes off without a hitch.

--Your RV shouldn’t have any trouble with sliding or slipping off when driving onto them with this surface.

--Grip mats also help prevent the leveler from sliding

Multi-Function

--Resists dirt, grease and oil

--Made to work with the curve of the Rapid Jack for extra 'jack' support

--Work for: travel trailers, campers, trucks, buses and other vehicles.

How it Works

--Decide which side needs to be leveled, place thelevelers either in front of or behind the wheel.

--Slowly drive onto the tri-levelers until you reach the desired level.

--If you need more details for how to works, please read the manual or watch the video on the page.

Flexible for use

--Up to 4 inches can be cut from the leveler without any contrary effects to fit the dual axle RVs.

--The amount of space required between tires to fit without cutting is subject to tire size.

--Normally it is about 2.5 – 3 inches of space, but this differs with tire size.

Why choose Kohree?

--Kohree has tested many times for this product to make it relaible to level your camper.

--Upgrade its performance of friction, material, anti-slip, anti-crack and application for tire size.

Why not this wheel chock?

--Leveling method: blocks the rolling direction of the tires, but the effect is definitely not as good as the tire racks.

--Imagine you are bouncing in the RV and walking around, the inertia caused by the body weight is big enough to cause your motorhome to suddenly lose its level.

Why not Tri-Leveler?

--Only for 'simple' light level applications. Do not hold very good on a heavier camper. (The load capacity is only half of Kohree's)

--No grip, slide, and crack under weight.

--Fixed curved size. It will not fit and not stabilize the car if your tire is slightly large.

• ✔ ANTI-SLIP JOINTING SYSTEM: Carmtek engineers have developed a special jointing system with precise grip channels on the surface of the levelers to prevent levelers from sliding when backing the camper tire onto the levelers.
• ✔ HEAVY-DUTY CONSTRUCTION: Built with a high-performance polymer, Carmtek Camper Leveler is made to last a lifetime. Our Camper Levelers works with any trailer that weighs up to 35,000 Lbs and with tires up to 32" diameter.
• ✔ FAST & PRECISE LEVELING: Avoid the hassle of setting up your camper with travel trailer leveling blocks or planks under your tires. Make trailer leveling a fast and precise task. Simply level your trailer any increment between 1/2" and 4" in less than 5 minutes.
• ✔ LEVELER TRIMMING FOR TIGHT DUAL AXLES: For some dual axle trailers one leveler may need to be cut to length to fit (depending on how much space is between tires), up to 4" can be cut off the leveler with no adverse effects. Typically, the amount of space needed between tires to fit without cutting is about 2.5" to 3" of space, but this varies with tire size. Our package includes clear and detailed instructions regarding the trimming of the levelers.
• ✔ LIFETIME WARRANTY: If you experience any issue down the line you are guaranteed a free replacement or complete refund.

User questions & answers

Question:	How well does it work on soft dirt? Does the chock also work on soft earth
Answer:	Yes , it does! I don’t have any problem !
Question:	Is the black portion of the leveler some kind of anti-slip material, or is it just black, slick plastic
Answer:	Our Camper Leveler Anti-Slip feature consists of a Special Jointing System between the precise grip channels situated on the Leveler's bottom surface and the notches on the Chock's top surface.
Question:	Where are they made? Can you get them in a 3 pack
Answer:	Noticed a 3 pack is now available here on Amazon: https://smile.amazon.com/CARMTEK-Camper-Leveler-Kit-Levelers/dp/B08NTVZ6QP
Question:	Can use this on a RV that has dual axle
Answer:	Yes, you can use them on RV with dual axle. But please be sure to measure the distance between tires before ordering. The amount of space needed between tires depends on tire size. Typically it is about 2.5" to 3" of space, but this varies with tire size. For some dual axle trailers with smaller spaces to fit the camper leveler between, one leveler may need to be cut to length to fit. Up to 4" can be cut off the leveler end with no adverse effects. The package comes with clear instructions regarding the trimming of the camper levelers, in case this will be needed.

• INCLUDES TWO LEVELERS, TWO CHOCKS, AND TWO GRIP MATS (Does NOT include a bag) - PRECISE, FRUSTRATION FREE LEVELING IN ANY INCREMENT FROM 1/2 INCH TO 4 INCHES IN UNDER 5 MINUTES - Are you ready for smooth, precise leveling experience without the hassle of stacking plastic blocks or wood under your tires and guessing each time? Make leveling your rig a lightning fast and precise task. Easily level your trailer any increment from 1/2 inch up to 4 inches. Each leveler is roughly 6" wide by 15" long.
• PATENT PENDING ULTRA STRONG LEVELERS ARE BUILT WITH HIGHEST QUALITY NYLON POLYMER CONSTRUCTION TO LAST A LIFETIME - Unlike other camper levelers that snap in half under 6000 lbs of load, the Beech Lane leveler is constructed with an extremely high performace nylon polymer used typically in structural load bearing applications. The result is a ROCK SOLID leveler that does not eventually break or compress under the weight of the trailer like other levelers do that are made of HDPE or PP.
• INCLUDED RUBBER GRIP MATS TO HELP PREVENT LEVELER FROM SLIDING WHEN BACKING ON - Thanks to constructive customer feedback Beech Lane has developed custom rubber grip mats that help to prevent leveler sliding when backing the camper tire onto the leveler. **The Levelers Now Come WIth Rubber Grip Mats Instead Of Grip TAPE**
• TWO LEVELERS CAN BE USED FOR DUAL AXLE TRAILERS, BUT UP TO 4" MAY NEED TO BE CUT OFF THE END OF ONE LEVELER DEPENDING ON HOW MUCH SPACE IS BETWEEN TIRES - For dual axle trailers one leveler may need to be cut to length to fit, up to 4" can be cut off the leveler with no adverse effects. The amount of space needed between tires to fit without cutting depends on tire size. Typically it is about 2.5" to 3" of space, but this varies with tire size.
• COMES WITH THE BEECH LANE LIFETIME WARRANTY - Unlike other brands that have a short return policy window, Beech Lane has a LIFETIME WARRANTY on the levelers and chocks. Even if you cut the leveler to fit your dual axle trailer, you still get full protection under warranty. If you experience any issue down the line contact Beech Lane for a free replacement or complete refund.

User questions & answers

Question:	Where are these made
Answer:	Their made in Malaysia.
Question:	is there a way to add blocking if you need more then 4in
Answer:	Yes. Put blocks down, then leveled on top of those and drive up on them.
Question:	Is this black version made in the USA like the red brand
Answer:	I do not know the answer to that question as I have not seen the red. I will say, " I am extremely impressed with the quality and service I have received with the black set I recieved." I have used them several times now and am so happy I bought them. Highly recommend it others a no regret purchase! Mike Gunner, San Diego
Question:	Can they be used w/ 4 rear tires that are side by side dualies? I only c dualies 1 in front of other ¬ side by side 2 tires each side
Answer:	Many campers have tandem axles, which is why I think that is what is shown in their literature. These can be used with dualies, with a ramp and chock under each tire on the side needing to be lifted.

Product description

The RV Ez Level is the fastest and easiest way to level to your RV. The Ez Level is easy to stow and easy to operate. After placing 3 AA batteries in the battery compartment simply place the RV Ez Level on the floor of your RV. Push the start button and watch the indicator lights. As you start to level your RV with your existing leveling system, Red flashing indicator lights on the RV Ez Level let you know which side is low. When the RV is level, all indicator lights go Green. The RV Ez Level's unique design uses reliable solid state electronics which automatically shuts off when not in use, extending the life of the 3 AA batteries.

• Illuminated indicators ensure easy visibility
• Levels both axis simultaneously
• Easiest to use level ever
• New standards of accuracy & convenience
• Made in the USA

User questions & answers

Question:	How many degrees of change is there from one end of the vial to the other
Answer:	1.5 - 2 degrees. total 3 - 4 degrees total. If you have any questions please contact us at 800.334.2004.
Question:	what is the base diameter of this level
Answer:	2 and 7/16 inches to be exact. Roughly 2 1/2.
Question:	is there a way to reset these levelers? I have to hold mine nearly sideways for all 4 lights to go green
Answer:	Here are the instructions to recalibrate .... 1. Place the EzLevel on a flat surface like a dinning table, oriented so that the EzLevel logo is on top (it does not have to be a level surface). 2. Push the power button to activate EzLevel 3. Push and hold power button for 10 seconds, when lights go OUT, let go of button. 4. When all lights go red, rotate the Ezlevel 180 degrees in the same spot (the EzLevel logo should be upside down at this time.) 5. Push the power button for 1 second and let go. 6. The lights will go off and then go red for a few seconds then resume normal operation. 7. The EzLevel is now re-calibrated.
Question:	Does this level work on travel trailers? the reviews seemed to be by motorhome users
Answer:	I purchased this first one for our 40' travel trailer and it worked so perfectly that I bought the 2nd one as s gift for our 5th wheel owner friends....perfect again! Neither of us will travel without it!

Product features

Camco EZ Level (25505)

The RV EZ Level is the fast and easy way to level to your RV. The EZ Level is easy to stow and easy to operate. After placing 3 AA batteries in the battery compartment simply place the RV EZ Level on the floor of your RV. Push the start button and watch the indicator lights. As you start to level your RV with your existing leveling system, Red flashing indicator lights on the RV EZ Level let you know which side is low. When the RV is level, all indicator lights go Green. The RV EZ Level's unique design uses reliable solid state electronics which automatically shuts off when not in use, extending the life of the 3 AA batteries.

• ✅ FIT - Xtra fits 9” round metal feet on many Class A and 5th Wheels RVs. Please verify size of jacks (9”) before ordering.
• ✅ PERMANENT - SnapPads can be installed in minutes but will stay on forever. Snap them on and rid yourself of all your leveling hassles. Say goodbye to crawling under your rig every time you set up.
• ✅ STABLE - SnapPad increases stability in 3 ways: a larger footprint, more vibration dampening, and by conforming to uneven terrain like gravel. ANTI-SLIP - SnapPads are made from durable rubber that grips any terrain. No more popping jacks or slipping in high winds or on slick surfaces.
• ✅ RUGGED - Our process uses recycled tire crumb, high strength resin, and a 100+ ton press to make SnapPads extremely durable. SnapPads are engineered to be resistant to UV exposure, water, heat, oil, tar, mud, and other environmental hazards. Protects your metal landing feet from damage.
• ✅ ENVIRONMENTALLY FRIENDLY - Made in the USA from recycled American tires. WARRANTY - Two year manufacturers limited warranty.

User questions & answers

Question:	I have 2018 jayco greyhawk 29mv iam wondering if they will fit
Answer:	Depends on what type of jacks you have on the motorhome. If you have the ones that are hydraulic and have a 9inch round pad these snap pads should fit. Caution Wat h you do not get your fingers pinched when the jacks come done to the pad to snap in place
Question:	What if I only need
Answer:	I only need 2. We can split it? LOL
Question:	Is there a reason you’re selling them for $30 more than the manufacturer does
Answer:	The manufacturer cannot make any right now due to COVID, so any reseller that has them is gouging the market. Best bet is to either wait until they can make some more or buy Hush Pads, they aren't attached but they do the same thing.
Question:	Why are these more expensive that snappad website? i thought amazon was suppose to have the best prices? snappad has for $159.95 with free shipping
Answer:	The manufacturer cannot make any right now due to COVID, so any reseller that has them is gouging the market. Best bet is to either wait until they can make some more or buy Hush Pads, they aren't attached but they do the same thing.

Product features

Xtra 6-pack

Ideal for fifth wheels with a six-point leveling system featuring 9” round jacks. Snap on a set of XTRAs to your rig and eliminate all of your leveling hassles. Permanently.

Stability

SnapPad increases stability in 3 ways: a larger footprint, more vibration dampening, and by conforming to uneven terrain like gravel.

Permanent

Installs in seconds. Stays on forever. Say goodbye to crawling under your rig every time you set up.

Protection

SnapPads absorb the daily punishment of the road and elements instead of your metal landing feet. Helps prevent the protective coating from being damaged by gravel, concrete, asphalt and the environment.

Anti Slip

SnapPads are made from durable rubber that grips any terrain. No more popping jacks or slipping in high winds or slick surfaces like ice.

Rugged

Our process uses recycled tire crumb, high strength resin, and a 100+ ton press to make SnapPads extremely durable.

Environmentally Conscious

Made in the USA from recycled American tires. Good for the environment. Good for the country.

Electrical Insulator

May help protect your family and electronics in the event of an electrical surge from a non-direct lightning strike.

Aesthetics

SnapPads looks as good as they work! Complete your RV by giving it some new, fancy shoes.

Product description

Blockaholic brings you our new Patent Pending 10 Piece Heavy Duty Xtra Large RV Leveling Blocks with built in ramps. Our innovative ramp design, at the leading and trailing edge of each block, prevents our block from "spitting out" when the tire starts to roll over it. We all know what we are referring to here:). Each block interlocks with the ones stacked on top of it creating a strong base supporting tens of thousands of pounds. Why buy competitor sets ??? Think about it..... With our enlarged footprint on our leveling blocks it creates more surface area supporting the level but also allows some room for error. If you're not lined up 100% on some of the smaller competitor products you have to pull off and reposition. With ours all you have to do is get close!

• ➊ Patent Pending Built-in Ramps keep the leveling block in place while driving up on it and wont "kick" it out. Our RV Leveling Blocks stay in place
• ➋ Xtra Large Camper Leveling Blocks!! Most lesser quality sets use a 8 1/2" block versus our 10 1/2" block
• ➌ Heavy Duty!! Compare the construction of "ours" versus "theirs". We designed our RV Leveling Pads to handle the heaviest of travel trailers, campers and motorhomes. Thick molded high density plastic block design that allows water and dirt through the leveling block. Other RV Leveler designs have solid plastic to make it look more sturdy but actually creates a problem rather than solving a problem
• ➍ Carrying and Storage Strap INCLUDED!! We know the inexpensive paper thin bag that other products use won't last long so we have designed a woven, re-inforced strap with sewn in handle and quick release buckle to keep your RV Leveling Kit together. Durable and easy to get on and off

User questions & answers

Question:	Maximum height of lift
Answer:	A lot of variables to this question (ie single or tandem axle trailer) but on a tandem axle you could build a pyramid of 3 blocks under each axle and get about 2 1/2 inch lift out of one kit. If you needed a pyramid of 6 blocks under each tandem axle then you would need two kits but would lift 3 1/2 inches to four inches depending on the size of the pyramid. Hope this helps!

Product description

As a person who likes to camp out, no doubt you would have experienced parking on uneven ground. Especially if you go to areas rarely visited by other people, there is a high possibility you won’t be able to park on a leveled area.However, making sure your RV is level is important since many appliances in a motorhome should not be tilted or else they’ll be ruined, like your RV refrigerator for example. Would you rather move your RV to a less desirable area just so it’s on level ground? Of course not; I’m sure you’ll do something to make your RV level enough. But instead of relying on rocks or using your jack, you should use RV leveling blocks.

• ✔Makes leveling the RV much easier - No More Guessing How Many Leveling Blocks To Use.Level your trailer in 5 minutes.Easily level your trailer any increment from 1/2 inch up to 4 inches. Each leveler is roughly 6" wide by 12" long.Used for tires no bigger than 32" diameter.
• ✔Install In Minutes- Using this leveler is easy enough; all you have to do is determine the height you want to achieve, drive to the leveler and stop to the point of the height, and then add the coupled wheel chock.
• ✔Rubber Mats Help Prevent The Trailer From Slipping When Backing On - rubber mats prevent leveler sliding and hold the chock in place when backing onto the leveler.
• ✔NO NEED TO TRIM FOR DUAL AXLE TRAILERS - Unlike other camper levelers that may needed to be cut to length to fit,make you cut the bottom of the leveler off! We have designed the EAZY2HD RV Leveler without any modicication when using with DUAL AXLE.
• ✔Only Use On Low Side - use the RV Levelers on the low side of the trailer,don't need to use on both side.Works for Camper up to 30000LB.

User questions & answers

Question:	I have an rv with tandum wheels (two wheels on each side of the rear axle). would i need to use a leveler for each wheel
Answer:	Yes,you need to use a leveler for each wheel.One leveler can't handle the weight.Just use the leveler on the low side.
Question:	Rv weight limit
Answer:	RV limit to 30000LB.
Question:	What is the warranty
Answer:	We provide one year warranty.
Question:	Does this come with the carrying bag
Answer:	Yes,it comes with carry bag as picture shows.

• ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV's and Trailers (Less Stress on Your Trailer)
• DOUBLE USE FOR YOUR MONEY: Use them as a seat, a motorcycle stand, or a water bucket to put out your campfire!
• RECESSED PAD AREA IS 9-1/8" diameter, recessed post-hole is 2-1/2" diameter; DIMENSIONS: 8" tall, 12" diameter at base, 10" diameter at top (14" tall when double-stacked)
• HEAVY-DUTY AND BUILT TO LAST! Rated at 6,000 lbs. (single block) and 1,500 lbs. (double-stacked)
• 100% MADE IN THE USA AND COMES WITH A LIFETIME WARRANTY!

User questions & answers

Question:	Can these be used on a level concrete pad
Answer:	Yes, there have been a few times where I not been perfectly level and I used one of those yellow Camco large blocks underneath these guys so they would have more footing. Worked great.
Question:	Will these work on a sloped driveway, where the front of fifth wheel is on the slope
Answer:	Depending on the angle your dealing with, yes they will work as long as that angle does not exceed the pivot limits of the pad on the individual jack.
Question:	My jack pads are larger than the recess, will they still work
Answer:	There is a 1/4" raised rim around the top. I would shape a 1/4" piece of plywood to fit inside the rim making the top surface level and I would think you would be ok. The built in magnet would be ineffective, but you could always incorporate your own magnet in the plywood filler if you thought it was needed. I am satisfied with the product. It works as described.
Question:	Will they work with a class a rv
Answer:	We are using them on our fifth wheel and love them! Don’t know on your Class A

Product features

STABILITY

The Trailer Jack Block eliminates nearly all of the movement in your parked RV or trailer! You will be amazed at how solid everything is when using the Trailer Jack Blocks with your stabilizer jacks.

LESS STRESS

Using the Trailer Jack Block under your jack(s) means your jack doesn't need to extend down so far, saving on wear and tear over time. And because the jack doesn't need to fully extend, there's less stress on it from movement.

The Trailer Jack Block also keeps grassy camping areas looking great because the width of the jack block, and the lip around the bottom of it, prevents a lot of sinking into the ground.

NOW WITH MAGNETS

The Trailer Jack Block with built-in magnets allows you to simply attach each Trailer Jack Block to the bottom of your stabilizer and hit auto-level. No need to check and adjust each block. Super fast and super convenient!

TRAILER JACK BLOCK

NOW...ARE YOU READY TO EXPERIENCE THE ANDERSEN TRAILER JACK BLOCK FOR YOURSELF?