14 best camco water heaters

Product description

Camco's RV Water Heater Tank Rinser helps extend the life of your water heater. The rinser lifts sediment that collects at the bottom of your hot water heater and washes it out of your water heater tank. Just hook a garden hose to the rinser and insert it into the water heater drain. The rinser has a shut off valve as well.

• Cleans sediment out of RV hot water heater
• Attach garden hose and insert into drain opening
• Includes shut off valve
• Helps extend the life of your water heater
• Lifts sediment that collects at the bottom of your water heater
• Cleans sediment out of RV hot water heater
• Includes shut off valve

User questions & answers

Question:	What is the diameter of the tip
Answer:	No. This one is propane only, no electric.
Question:	What is the tube made out of? Plastic? Metal
Answer:	No, it has a pilot light that is on all the time.
Question:	Will this work with suburban hot water heater
Answer:	Yes it is propane
Question:	I'm new to RVing. Could the same be done with a garden hose? I have a Suburban suburban SW6D-type
Answer:	It goes in a camper. Water comes from water source and fills this tank. The water is heated by gas or electric. When you turn one of your faucets on that’s the pressure source.

Product description

With the RV Hot Water Heater you can convert your gas unit into an electric one and save the propane for your barbecue. It converts any 6-gallon RV LP gas water heater to 120 volts of electricity on demand and has a stainless steel cartridge that heats the water to temperatures ranging from 90 to 150 degrees Fahrenheit. This water heater conversion kit includes an on/off power switch with a mounting bracket and a fully adjustable thermostat for both convenience and safety. A 15 A/120 V electrical service is required to use this water heater, which includes a kit with all necessary power cords and color-coded wire assemblies to make setup quick and easy. This 6 gal RV water heater's thermostat comes factory preset to 120 degrees Fahrenheit and might require adjustment, depending on your system.

• Converts any RV LP gas water heater to 120v electricity on demand
• Includes on/off power switch with mounting bracket and fully adjustable thermostat
• All necessary power cords and color-coded wire assemblies are included
• For 6 Gallon RV water heaters
• 425W element measures 6.25” long

User questions & answers

Question:	How many watts is the heating element
Answer:	It is only about two feet from the base. It runs the length of the lamp, but only a short amount comes out from the base.
Question:	Is there any reason I could not control this with a different thermostat? I want to heat water in a tub
Answer:	There very sturdy not had any issues whatsoever.
Question:	can I still use the existing propane at the same time as the electric for quicker heat up
Answer:	Yes, the heating lamps can be replaced.
Question:	Watts
Answer:	It provides warmth to the people sitting directly under it, and I would say within 5 feet and that’s about it. We are using it for our patio for a 6 ft long table, and it does not reach people at the other end.

Product features

Camco Hot Water Hybrid Heat Kit (11673)

Camco 6 Gallon RV Hot Water Hybrid Heat easily converts any 6-gallon RV LP gas water heater to 120V electricity on demand, helping to conserve propane. Its stainless steel heating cartridge heats the water to temperatures ranging from 90° to 150° F. The kit includes On/Off power switch with mounting bracket and fully adjustable thermostat. All necessary power cords and color-coded wire assemblies are also included. 15 A/120 V electrical service is required for use. The thermostat is factory preset to 120° F.

Product description

The Camco Water Heater Element Quick Change Tool helps you save time and water when changing your water heater element. Instead of emptying your entire water heater tank just to change the element, simply turn off the water at the water heater to create a vacuum. Securely attach the tool, and place a bucket handle in the built-in groove to catch any excess water. Quickly change the element and remove the tool when you’re done. The Water Heater Element Quick Change Tool is simple and easy to use, and made in the USA.

• Helps save time and water when changing your water heater element
• Eliminates the need to drain you water heater tank
• Built-in groove holds a pail or bucket to catch water
• Simple and easy to use
• Made in the USA

User questions & answers

Question:	How does this attach
Answer:	On my water heater, the elements had a 'bump' where the tank was threaded that the ring sort of jam-fit onto. (I found it easiest to do it by putting the top center of the ring on the top of the bump then pressing down using the spout as a lever).

Product description

Camco's drain plug wrench is specifically designed for use with RV water heater drain plugs. The angled design conveniently fits in tight spaces and includes prongs for rusted drain valves and petcock drains. Fits both 7/8" and 15/16"Drain plugs. Includes two 1/2" NPT replacement drain plugs and Teflon tape.

• Designed for RV water heater drain plugs
• Fits both 7/8" and 15/16" drain plugs
• Angled design allows you to reach tight places
• Includes prongs for rusted drain valves and petcock drains
• Includes wrench, two 1/2" NPT replacement plugs and Teflon tape

User questions & answers

Question:	Is this a direct replacement for
Answer:	These plugs are hollow and it leaked after a the water heater cycled a few times. I replaced with Atwood plugs and no problems since.
Question:	how long is the wrench
Answer:	No it's the same plug that came with my rv new.
Question:	Are these plugs hollow, or solid plastic
Answer:	For use with hand drive roofing nails. Shoots loose nails into tight spaces. Used for installing ridge vent, vinyl siding and under eaves. Features: One third the size and weight of standard palm nailers Lightweight and compact Easily fits into nail pouch Magnetic nose holds fastener Easy to actuate Nail seats deeply for easy use Prevents damage from missed hammer blows Specifications: Firing Mode: Multi-blow Operating Pressure: 60-110 PSI Fastener Type: Hand drive roofing nails Fastener Range: 7/8" to 3" Height: 2.8" Length: 4.0" Width: 2.2" Weight: 1.0 lb.
Question:	What is the insect resistant plug? (I'm guessing its vented for off season storage, not usable when using the RV
Answer:	Hold it in place longer to drive the nail in farther. It's basically a pneumatic hammer. It doesn't drive the nail in one single action. This was a lifesaver for nailing shingles under a low clearance eave.

Product features

Camco RV Water Heater Drain Plug and Wrench Kit

Description:

Camco's drain plug wrench is specifically designed for use with RV water heater drain plugs. The angled design conveniently fits in tight spaces and includes prongs for rusted drain valves and petcock drains. Fits both 7/8" and 15/16"Drain plugs. Includes two 1/2" NPT replacement drain plugs and Teflon tape.

• Designed for RV water heater drain plugs
• Fits both 7/8" and 15/16" drain plugs
• Angled design allows you to reach tight places
• Includes prongs for rusted drain valves and petcock drains
• Includes wrench, two 1/2" NPT replacement plugs and Teflon tape

Product description

2000W/120V Screw-In Element 02203

From the Manufacturer

Camco's 2000W 120V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

• High Watt Density heating element
• 120V/2000W
• UL Listed
• Easy to Install
• Minimum tank diameter 9"

User questions & answers

Question:	What size o-ring do can I use on the inside of my pot to fit this
Answer:	Hello. Thank you for the message. The item you are viewing does come with the o-ring. You do not have to worry about finding the right size. For further inquiries, please feel free to contact us directly. Thank you!
Question:	What thread size do these use
Answer:	It is 1" NPS. Not NPT As stated by others, NPT or National Pipe Thread is tapered. NPS is National Pipe Straight, or in other words, not tapered. If we are talking about 1", both have 11.5 threads per inch, and can work together in some cases.
Question:	what is the heating element material
Answer:	If your are concerned about heavy rust on the inside of your water heater walls or boiler or what you are using it for, DO NOT BUY. The heating elements from Camco will rust after very first time of use. Instead take a look at the elements being offered by "Brewhardware.com" or "Southern Boy Stills.com".Best regards.Emmett
Question:	wanna you for my HLT. Does this rust
Answer:	Outside is crome plated it will oxidize and collect mineral deposits the tube is copper. It will not "rust" but it will oxidize.

Product features

Camco 02202/02203 2000W 120V Screw-In Water Heater Element - High Watt Density

Description:

2000W, 120V, Water Heater Universal Flange Element, High Watt Density, 150+ Watts Per SQIN, Minimum Tank Diameter 9", Gasket Included, Fits Most Models Of American, A.O. Smith, Bradford White, Craftmaster, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Ruud, Sears, State, & Whirlpool Heaters, UL Listed, Detailed Instructions Included.

• High Watt Density heating element
• 120V/2000W
• UL Listed
• Easy to Install
• Minimum tank diameter 9"

Product description

Camco RV Magnesium Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. This Anode Rod fits Atwood water heaters. Patented.

• Extends the life of a water heater by corroding itself so that the water heater doesn't
• Magnesium anode rod
• 0.5" diameter x 4.5" long
• Provides protection against galvanic corrosion
• 1/2" NPT fits Atwood heaters

User questions & answers

Question:	Would either of these work in a model gc6aa-8 model heater
Answer:	Don't know the model number but it fits the standard Suburban model
Question:	The video says this is made of magnesium, but description says aluminum. Which is it
Answer:	Hi it depends on your make and model of water heater. Thank you
Question:	Does this fit the suburban model sw10de
Answer:	I don't know what 91561 is.
Question:	How do i know which size i need for my rv water heater
Answer:	It's about 6 inches long but it was still hard to maneuver in the space to get the plug in.

Product description

Camco RV Anode Rod with Drain is a patented magnesium anode rod for aluminum water heaters (Atwood style). It preserves the life of your water heater by corroding itself so your water heater tank doesn't. Replace your 1/2" pipe thread drain plug with the Camco RV Water Heater Anode Rod to extend the life of your RV’s water heater. This Anode rod features an internal drain valve to allows you to drain your water heater without tools.

• 4.5” Magnesium Rod for Atwood style aluminum hot water heaters
• It preserves the life of the water heater by corroding itself so the water heater tank doesn't
• Internal drain valve allows to drain your water heater without tools
• Includes internal drain valve that allows draining of the water heater without tools
• 1/2”-14NPT thread

User questions & answers

Question:	Can this be used to replace the original rod from the camco hybrid heat kit
Answer:	All brass, contains lead you can't take it out. This item is below the lead leavels that the federal government allows. This is drinking water safe.
Question:	Does this rod fit a surburban water heater
Answer:	It would have to be larger than the ears on the drain valve to fit. I never used a hose to drain the tank, just open up and drain out it won't hurt anything on the pan and will run off the side of the coach. I sold my trailer so I can't measure the size .Sorry
Question:	Does this product contain lead
Answer:	This hose doesn’t make the water warm. The warming part keeps the hose from freezing in cold climates. For hot water added to a pool, hook a water hose to your hot water tank and turn it on. CAUTION. IT WILL BE HOT!!!!!! So you’ll need to add cool/cold water as well.
Question:	what size hose fits the pet cock valve
Answer:	I cannot advise what the difference maybe. But I and my friend purchased the 22912 and worked great. We used it in 6 inches of snow and my water supply did not freeze. I hope this helps your decision.

Product description

This wall mount, aluminum tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. These aluminum pans will not rust, corrode or crack and may be used for gas or electric water heaters. Includes 1" and 1-1/2" dual size PVC drain fitting. Measures 21.72" Width x 14.17" Height x 11.62" Depth and weighs 2.3 pounds.

• For gas or electric water heaters
• Aluminum will not rust, corrode, or crack
• Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2"
• Protect finished areas from water damage
• Measures 21.72" Width x 14.17" Height x 11.62" Depth and weighs 2.3 pounds

User questions & answers

Question:	what are the actual dimensions of this pan? Heading has two (different) listed; product info yet another
Answer:	11430 Tankless W/H Drain Pan, Aluminum, w/PVC Fitting 6 21.7 x 11.6 14.2 Height: add 1.2" for fittingIf you have any questions please contact us at 800.334.2004.
Question:	Will it fit a rheem rtex-36 240v 4 heating chambers residential tankless water heater
Answer:	Width from the front view left to right 21-3/4 Side left to right 13-1/2 Height top to bottom 14-1/4 for height add 1.2” for fitting.
Question:	Is this sturdy- thick aluminum
Answer:	Yes, this item is manufactured using 20 gauge aluminum and is .032” thick. If you have any questions, please contact us at 800.334.2004.
Question:	How will this hold up to the acidic water released by condensing tankless systems
Answer:	I can’t help you Steve since my tankless hot water heaters are not in my NJ home. I have a vacation home in VA on a lake. My well water there is not acidic. Also the Camco products were just installed after I had a leak not from the unit itself but from a brass fitting connected to the pipe coming out of the bottom of the unit. I only found out about the product after the damage occurred & had them installed. Sorry I couldn’t help.

Product description

Easily replace your old or broken water heater door latch with a durable stainless steel cam lock. Stainless steel won't rust or corrode, and is built to last. Won't create streaks of rust. The cam locks are easy to install and operate, and replace the latch on your water heater or gas bottle cover. Pack of 2.

• Replace broken door latch quickly and easily
• Ideal for new or Replacement installation
• Easy-turn thumb operated style
• Stainless Steel won't rust or corrode
• Pack of 2

User questions & answers

Question:	will this work on a suburban brand hit water heater door
Answer:	this is universal. It worked on my campers water heater door without any problems
Question:	Would this work on the Dometic fridge side vents replacing the two black plastic latches
Answer:	No, these will not work on refrigerator vent covers. You will need to purchase the plastic latches.
Question:	Does it show you how to put it on
Answer:	I purchased this item about 2 years ago and the best that I can remember it did have instructions on how to install it. I know that it was easy to install and has worked perfectly the past 2 years.
Question:	How wide is the flat part
Answer:	1/2” but is measured in metric, so it’s slightly over.

Product description

Camco's Chrome-Plated Professional Water Heater Element Socket allows you to easily replace screw-in electric water heater elements. Using a ½-inch drive ratchet, the element socket removes standard hex bushing water heater elements that are typically found in home applications. Not for use on RV electric water heaters; will not fit a water heater drain valve.

From the Manufacturer

Camco's Chrome-Plated Professional Water Heater Element Socket allows you to easily replace screw-in electric water heater elements. Using a ½-inch drive ratchet, the element socket removes standard hex bushing water heater elements that are typically found in home applications. Not for use on RV electric water heaters; will not fit a water heater drain valve.

• Professional Element Socket: Easily replaces screw-in electric water heater elements
• Compatibility: Compatible with standard ½-inch socket drives
• Fits: Standard hex bushing water heater elements
• Usage: For home applications
• Durable Construction: Chrome-plated steel

User questions & answers

Question:	Will this fit nautical boiler #fvslrsb1210A
Answer:	Dear, our yoga pants can be worn for daily or sports
Question:	What size element will this accommodate
Answer:	Don't worry, these pants won't see through
Question:	What size element will this accommodate? 1 1/2" or
Answer:	Some compression
Question:	What is the difference between this and camco
Answer:	Fit perfectly - I'm 5'11" (180cm) and weight 165lbs (75kg). The quality of the material is very good and very stretchable (not too tight nor loose)

Product features

Camco 09951 Professional Water Heater Element Socket

Camco's Chrome-Plated Professional Water Heater Element Socket allows you to easily replace screw-in electric water heater elements. Using a ½-inch drive ratchet, the element socket removes standard hex bushing water heater elements that are typically found in home applications. Not for use on RV electric water heaters; will not fit a water heater drain valve.

• Professional Element Socket: Easily replaces screw-in electric water heater elements
• Compatibility: Compatible with standard ½-inch socket drives
• Fits: Standard hex bushing water heater elements
• Usage: For home applications
• Durable Construction: Chrome-plated steel

Product description

The most popular element in use today. Fits Private Label, State, Reliance , Rheem, Ruud, Sears, Montgomery Ward, and many other brands. Elements individually carded.

• High Watt Density heating element
• 120V/1500W
• UL Listed
• Minimum tank diameter 9"
• Sold as 2 Pack

User questions & answers

Question:	Does this fit into a surburban RV water heater
Answer:	It 4 by 2 1/2 and yes can hold a business card even a credit card
Question:	Is this for two
Answer:	Yes,These pants are to the ankle.

Product description

Camco's 4500W/240V screw-in foldback type Ultra low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Premium Ultra LWD Lime Life elements carry a limited 5 year warranty. The Ultra LWD of this element helps prevent lime deposits and the high performance nickel-chromium stainless steel alloy sheath gives it additional strength to resist dry firing. The combined effect make the element better suited for use in areas with problem or intermittent water supply. Screw-in type elements are universal replacement parts that fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

• Premium Ultra Low Watt Density heating element has 5 year warranty
• 240V/4500W
• UL listed
• Resists dry firing, lime deposits, and sand that would burn out ordinary elements
• Minimum tank diameter 15"

User questions & answers

Question:	It is a 1/2 inch NPT
Answer:	They are soft, and can fold up. They can compress your clothing, though, as they will squeeze the items down as you zip them up. You just can't overfill or the zippers would break. I know I can fit more in my suitcase with them.
Question:	Could anyone tell me the length of the element, not the overall length? Designing a RIMS tube
Answer:	of course,also fit into a backpack.
Question:	How much power will this pull if operated @ 110V? 15A circuit enough
Answer:	the material is water proof but the top of each bag is a mesh,thank you
Question:	Is this 1 1 and 3/8 inch thread
Answer:	Hi dear Including : 7pcs packing organizers set ( 3 different size clothes storage bags , 1 bra underwear bag , 1 shoes bag , 1 toiletry bag , 1 OEE laundry bag ) You can refer to the img on the website Thank you for question.

Product description

Cameo's 9000 with 240V Screw-In Type High Watt Density Thankless Water Heater Element is a universal replacement for Eco Smart electric thankless water heaters. This element is compatible with Eco 18, Eco 27, and Eco 36 models. They are easy to install and come with detailed instructions on how to replace your old element. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

• Wattage/Voltage: 9000with240V; 2300with120V
• Style: Screw-in fold back
• Construction: 1-inch NPS brass bushing with copper sheath; Includes gasket
• Compatibility: Thankless water heaters - Eco 18, Eco 27, and Eco 36 models
• : 1-year limited

User questions & answers

Question:	What is the actual product dimensions and not the package dimensions
Answer:	Since, I was replacing an burnt out element, in a EcoSmart 36 tankless heater, I did not measure it. I purchased this element which fits several of the EcoSmart heaters (of which the 36 was listed). I knew it would fit and there were not problems. Sorry I don't have more information.
Question:	Will this work with a richmond rmtex-27kw
Answer:	Compatibility: Tankless water heaters - Eco 18, Eco 27, and Eco 36 models
Question:	Will this element fit in a eemax em24027 model
Answer:	Item# 02133 replaces elements in EcoSmart models ECO 18, ECO 27, & ECO 36 models, which are whole-house units with a 9,000W (9kw) / 240 V element. They are not made to replace elements in the Eemax EM models. Any replacement element should have the exact same wattage and voltage as the OEM element and be made specifically for Tankless units.
Question:	what country is this manufactured in
Answer:	Vietnam

Product description

Use the Camco RV 1/2"Water Heater Drain Valve to replace your water heater drain valve. This sturdy brass replacement is easy to install.

• Replace faulty RV water heater valve
• Easy installation
• 1/2" NPT male threads
• Durable brass construction

User questions & answers

Question:	What do the different sizes refer to
Answer:	where does it state that it needs to be a clear, all-the-way-see-through bag? first time hearing that..
Question:	Can I use this valve for draining my RV hot and cold lines for winter freeze proofing
Answer:	I used it in the fall of 2018 and had no issues what so ever-I love this bag as it holds so much! It actually surprised me how roomy it was and it held all my travel needs for 2 weeks. I am heading to Italy this year and I will be using it again!
Question:	Do I need to use teflon tape on both the inner and out thread or just the outer one
Answer:	Yes, twice - once to Europe and once to Australia. No problems either time.
Question:	Does this fit Rockwood Minilite 2104s
Answer:	Unfortunately you can’t. You’d have to dig which is where I struggled when I needed something quick on an airplane. However, one positive note, the main compartment can certainly fit plenty of items.

Product features

Camco ½" RV Water Heater Replacement Drain Valve

Description:

Use the Camco RV 1/2"Water Heater Drain Valve to replace your water heater drain valve. This sturdy brass replacement is easy to install.

• Replace faulty RV water heater valve
• Easy installation
• 1/2" NPT male threads
• Durable brass construction