13 best rv power jacks

Product description

Lippert 285318 RV Electric Power Tongue Jack 3500 lbs. Capacity Black

• TIME-SAVING. No cranking necessary. Designed with an enhanced rocker switch, you can automatically raise and lower your A-frame trailer with the simple push of a button -- saving you time and energy
• EASY INSTALLATION. Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time
• POWERFULLY DESIGNED. With a 3,500-pound lift capacity and 30 AMPs of power, this jack was constructed to do all the heavy lifting, so you don’t have to
• INTEGRATED LIGHTING. Equipped with 4 LED lights that shine directly down on the coupler, you can operate the Power Tongue Jack night or day with ease
• ADDED PROTECTION This jack was built with a tough textured casing that protects it from getting chipped or scratched by damaging dirt and debris
• ADDED PROTECTION. This jack was built with a tough, textured casing that protects it from getting chipped or scratched by damaging dirt and debris
• Lippert Components Power Tongue Jack raises and lowers your trailer with the click of a button

User questions & answers

Question:	What gauge wire is utilized for connecting to the battery
Answer:	Zero, punch your self in the face for a better decision than to get this crap.
Question:	Mine has failed after 4 years and 5 months of use. i don't think its a water issue i think extreme heat in this utah desert climate. anyone
Answer:	Yes, as long as it is under 3 tons. I have a '92 Ford Bronco and lifted it no problem, the jack works great. Hope this helps.
Question:	Does this jack make a bad noise when it is fully retracted or extended? It sounds really bad
Answer:	I bought one, whcih is made of firm metal. It writes ""Updated Version"" in features, i think they have upgraded their products.
Question:	What is the height from where this jack connects at the trailer, at three bolts, to the top of the jack itself
Answer:	Hey there! I believe that this is the information that you need: Lifting Range: 4.72"-16.5"

Product features

Quick Facts

-4 LED lights provide excellent illumination while reducing power consumption.

-Increased tube diameter now gives our jack a 3,500-pound rating.

-Helical cut gears reduce noise and improve operating efficiency.

-Mounting hardware, pins and manual crank handle included.

-Textured casing helps protect from chips and cracks.

-Enhanced rocker switch improves durability.

-30 AMP, 18 Inch Stroke.

• WEIZE A-Frame electric trailer jack features 3,500 lbs. lift capacity, a low maintenance 12V DC electric gear motor, a adjustable drop-leg and a LED light that added safety.
• The heavy duty power tongue jack provides 18” lift, retracted 9 inch, extended 27”, drop leg extra 5-5/8” lift. Outer tube dia.: 2-1/4", inner tube dia.: 2"
• The electric rv jack allows you to raise or lower any A-frame trailer with the push of a button, quicker and easier than hand cranking.
• This electric tongue jack fits for rv, 5th wheels, and all types of trailers. It really helps to save your time and energy instead of cranking a manually operated jack.
• We guarantee this product to be free from defects in materials and workmanship, 1-Year warranty because of quality problems from the date of purchase. Limitations apply.

User questions & answers

Question:	What type of 30 a fuse should i get for replacement? ceramic, inline but fast or slow blow? my fuse knowledge is little to none
Answer:	Yes.
Question:	Do the switches face forward toward the tow vehicle or backward toward the trailer
Answer:	The Max Loading is 11000lb (5.0T) generally it's enough to lift your car except for specific vehicle models.
Question:	Can you drop the tailgate while connected
Answer:	Yes
Question:	Jack seems to have broke on first try
Answer:	Most of them are ok

Product features

Features

• A-Frame Mounting Bracket
• 3,500 lbs.
• 12V DC power Jack
• 18” Lift
• Drop leg provide extra 5-5/8” Lift
• Weld/Bolt-On
• Electric and manual operation are optional

Specs

• Electric jacks can lift or lower your trailer.
• The purpose of the drop leg is to provide extra height easily in operation, no need to shake the handle to gain necessary height.
• Design 2 switches, one for lifting or lowering the height of the jack; the other controls led lights
• LED lights are designed to be used at night to increase brightness and point directly at the installation location.
• Manual handle is mainly designed to replace the motor when no power.
• Black powder coated outer tube & clear zinc inner tube and drop leg;
• Wires to 12-volt power source
• Serrated washer included for ground connection

About scissor jacks

• Caravan /Camper Jack - EJ-3550-B
• This 12DC Electric A frame mounting bracket & drop leg jack has 2 switches for operation to rise up and down.
• Jack has a retracted mounting height of 9", and extended body height of 23-5/8”, its screw provides 18" travel.
• Drop leg offers an extra 5-5/8" of lift. Includes a manual handle together.
• Crate or retailed color box are optional.

Economy

• Positive/Negative:Black Wire(+) /Blue Wire(-)
• oRetracted: 9"
• oExtended: 23-5/8"
• oScrew travel: 18"
• oDrop leg travel: 5-5/8"
• Outer tube dia.: 2-1/4"
• Inner tube dia.: 2"
• The distance between the two holes in drop leg: 1-7/8"
• Foot Size: 5-1/2" (Round)

Product description

New Power LED 3500 lb Tongue Jack. Jack includes LED lights for night time use. This is a 12v power RV Trailer Camper jack with a 30 Amp inline Fuse. Features: - Black Powder coat finish resists rusting - 3500 lbs lifting capacity - Features easy to operate switch for lifting up to 18" - outside tube diameter：2" - 3 bolt mounting into standard A-frame trailer coupler - Easy operation hand crank in case your battery goes dead - Dual LED lights for use at night - 12 volt operation - Black Removable foot pad - 30 AMP fuse Specifications - Lifting Height :18" - Lift Capacity: 3500 LBS - Fits 2.22" Standard Trailer Tongue Mounting Holes - size: 33.46 x 12.4 x 8.46 inch - Weight: 28.7lbs

• 3500 lbs lifting capacity with Black Removable foot pad
• Features easy to operate switch for lifting up to 18"
• Black Powder coat finish resists rusting
• 3 bolt mounting into standard A-frame trailer coupler / outside tube diameter：2"
• Dual LED lights for use at night / 30 AMP fuse

User questions & answers

Question:	Can this be manually cranked in case of failure
Answer:	It should work fine. I use mine on a 2014 Dodge Durango with no problems.
Question:	Will this work for a 10k pound camper
Answer:	If that is the case, a flat tire is the least of your problems. No manual operation.
Question:	Does the foot have any vertical adjustment? The top of my hitch ball is 23.75" off the ground. Will the foot make up 6" over the 18" lift
Answer:	The maximum height is 16.54in, as long as your vehicle weight does not exceed 3Ton, it can be used normally.This electric car jack is made of thick material andcontact suface and compact triangle design for extra stability,reinforced solid screw rod makes the electric car jack more powerful.
Question:	Dimensions of top portion
Answer:	I would definitely try looking it up on YouTube. They have a lot of useful information regarding replacing and fixing power cords.

Product description

• Featured slim design to save space
• Stroke 20% faster but powerful and quiet!
• Bright LED light for night operation
• 55" long power cord
• 5 steps adjustable & removable 8" drop leg
• 5.5" extra large foot plate provide more stable support
• Rain water drain holes on foot plate
• One-piece motor cover and rain proof buttons
• Powder coated rust resistant outer tube in a black finish
• Zinc plated rust resistant inner tube
• Stainless steel screws/bolts outside motor cover never rust!
• Emergency detachable hand crank included
• Mounting hardware included
• Rain proof head cover included, a $10 value!
• 14" stroke travel lifting
• 3500lbs lifting capacity
• Fits 2-1/4" standard A frame trailer coupler mounting holes
• Mounting hardware included
• 12V operation
• Bracket height: 9-1/2" retracted, 31-1/2" extracted (w/drop leg fully extracted)

• Featured slim design to save sapce, Stroke 20% faster but powerful and quiet
• 8" 5-step adjustable drpop leg with over size 5.5" diameter foot plate, with rain water drain holes
• Bright LED light for night operation; Emergency detachable hand crank included
• One-piece motore cover, stainless steel screes/botls outside cover never rust! Powder coated outer tube and zinc plated inner tube for rust resistant
• 14" stroke trevel lifting + 8" drop leg; 3500lbs lifting capacity; 12V operation, 55" power cord

User questions & answers

Question:	Whats the dimensions or measument from mounting plate to very top
Answer:	i do not have mine with me at the moment but i would say about 18"...
Question:	What does it plug into
Answer:	12 volt. If there is only one wire it goes to the positive side of the battery. Place a 30amp fuse on the wire as well. . The jack will ground itself to the trailer tongue
Question:	Will I be able to open my tailgate on my 2017 Silverado 1500 without hitting it on the jack
Answer:	It will hit ,so no can't open it all the way.
Question:	I read in one review somewhere that the bolt pattern is backwards on this unit, is that correct? I am putting on a travel trailer
Answer:	No it is not backwards! Just face the front out and it will bolt right up. My install was about 15 minutes!!! I love it!!!

Product description

RAM's 3,500 Heavy Duty Power Jack with Black Top. Easy to operate with just a flip of the switch. Durable exterior grade black powder coat finish on outer tube. Zinc finish inner tube with removable sand foot. 18" travel height. Bright LED light for easy night time hookup. Include a drop leg for 4-3/4" of additional adjustment. Durable hardened steel gears for year and years of normal use. Crank handle for manual override in case of power loss. Setup for 12 volt battery use.

• Bright LED light for easy night time hookup
• Include a drop leg for 7-1/2" of additional adjustment
• Durable hardened steel gears for year and years of normal use
• Crank handle for manual override in case of power loss
• Setup for 12 volt battery use

User questions & answers

Question:	Does the manual crank handle connect on top of the unit or the side of unit when using
Answer:	The plug on this dehumidifier is a 2 prong plug.
Question:	Does this jack come with a way to raise or lower it incase the motor fails
Answer:	I have not seen any mold growth - I empty the tank daily.
Question:	what is the outside diameter of the main tube
Answer:	I really think it could. I have one in my living room and one in my bedroom and they both work so well.
Question:	What is the warranty
Answer:	Here's a link to the HEPA filters: Tenergy Replacement HEPA Filter Sorbi https://www.amazon.com/dp/B07DQT8VHR/ref=cm_sw_r_cp_api_i_RaO6Cb606D7XW

Product features

Electric Jack with Footplate

Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.

• Electric jack lets you raise and lower your A-frame trailer
• Drop leg allows for increased lift and saves time when raising or lowering
• 2 Toggle switches on the front of the housing let you operate the jack
• LED light illuminates at a downward angle to help you focus on your coupler
• Emergency crank (included) allows you to manually operate jack if needed
• Black powder coated outer tube
• Zinc-finished inner tube and footplate resist corrosion
• Simple, bolt-on installation: Wires to 12-volt power source; 12-Gauge wires

Product description

Ditch the Crank! The PSX1 High-Speed Power Stabilizer by Lippert Components lets you do the one thing you want most – spend more time camping, and less time setting up for camp. With the flip of a switch, you can take the sway out of your RV or trailer in minutes. No more manual cranking. No more hassle. Uneven terrain? No problem. Each leg of our stabilizer operates independently automatically reacting to bumpy, rugged surfaces until the RV is secured safely in place. Plus, our PSX1 Power Stabilizers are compatible with most RVs and trailers on today’s market.

Black Switch Configuration Details: SKU 298707

Legs extend up to 30”

Waterproof switch Includes: Switch and harness and reset breaker

Mounting hardware provided

79” long x 6. 2” wide x 19” tall, 58 pounds

• Includes waterproof switch, harness and reset breaker
• Legs extend up to 30”
• DIMENSIONS: 79” L x 6. 2” W x 19” H, 58 pounds
• POWERFULLY DESIGNED — No more cranking. With the PSX1, campers can stop wasting time and energy with manual cranks. A flip of a switch is all it takes to take the sway out of your RV or trailer.
• RUGGED VERSATILITY — We designed our stabilization system to automatically adjust to uneven, rugged terrain. Each leg operates independently, navigating the surface until safely secured in place.Linc remote compatible
• DURABLE CONSTRUCTION — Built with heavy gauge steel, embossed legs, and a powder-coat finish — when it comes to durability, this power stabilizer was made to withstand the elements and perform with efficiency, day after day.
• THOUGHTFUL INNOVATION — We’ve equipped our PSX1 with integrated breaker technology designed to protect users from damaging their RV by tripping the breaker if the circuit is overloaded while lifting the trailer — and it helps prevent side-to-side movement while extending and retracting.
• QUALITY — Backed by a name you can trust with a reliable one-year manufacturer’s warranty for added peace of mind on the road.

User questions & answers

Question:	Minimum height ? How tall when closed / retracted
Answer:	We put ours in the same spot on a 35 foot wildcat
Question:	what weight rating are these stabilizer jacks
Answer:	My unit was a replacement. It was bolted to the frame. I had it installed and wired in about 2 hours. Worked and installed great. Very pleased with the whole process. Thanks
Question:	Will these fit on a 36 foot fifth wheel big country? we had a set and froze up so can i just put them in the same spot as the old set
Answer:	No it comes in a box
Question:	How is the stabilizer attached to the frame: welding or bolts
Answer:	yes you sure can

Product features

Meet the PSX1 by Lippert Components

Our power stabilizer lets you do the one thing you want most. Spend more time camping, and less time setting up for camp. With the flip of a switch, you can take the sway out of your trailer in minutes. No more manual cranking. No more hassle.

Uneven terrain? No problem. Each leg of our system operates independently — automatically reacting to bumpy, rugged surfaces until the RV is secured safely in place. Plus, our Power Stabilizer is designed to sufficiently stabilize any RV in today’s market.

POWER

Ready to save time and energy setting up your camp? The PSX1 is fast, strong, and efficient — allowing you to extend and retract your stabilizer with total ease.

DURABILITY

Built with heavy gauge steel and embossed legs — the PSX1 is up for the challenge. Plus, the durable powder coat finish protects the stabilizer from wear and tear caused by the elements.

VERSATILITY

Uneven terrain is no obstacle for the PSX1. Each leg operates independently, automatically adjusting to bumpy, rugged surfaces until your RV is secured safely in place.

INNOVATION

The PSX1’s integrated breaker technology is designed to help prevent side-to-side movement while extending and retracting, and it protects users from damaging their RV by amping out before attempting to lift the trailer.

Product description

The Husky Brute 4,500lb Power Jack is loaded with features, including an 18-inch full stroke with 6-inch drop down leg, and a fast travel speed of 10 inches in as little as 38 seconds. Hardened steel gears, weather protected switches, and a water resistant enclosure make this jack super durable and helps ensure a long life. The Husky Brute Power Jack fits all A-frame couplers. It's also economical, with a low 25A draw at rated load. Additional features include three LED work lights, a built-in connector storage bracket that's not found on any other power jack, and a 30A fuse and in-line fuse holder.

• Powered trailer jack with 4,500 pound rating, 12-volt operation, hardened steel gears, and soldered connections
• 18-inch full stroke with 6-inch adjustable drop-down leg reduces time to set jack and reduces wear on motor
• 3-sided LED light system to illuminate hitch and spring bar area
• Features a friction-reducing ball screw, usually only found in more expensive jacks
• Weather-resistant trailer connector storage bracket with durable hammer gray finish

User questions & answers

Question:	Do the bolts mount on a atwood jack
Answer:	Don’t remember where it’s made. I leave mine on year round but do remove it for travel.
Question:	will this come with manual crank handle
Answer:	Yes, the Clever Cover for the #3500 should fit the #5000 Stromberg Carlson jack.
Question:	How does this install onto the "A" frame? Does it require any intensive wiring
Answer:	The Clever Cover comes with a 30-days warranty. The materials are carefully chosen and tested. Please reach to us directly through Amazon or our website and we will be happy to assist you. We are a small family business and customer satisfaction is very important to us.
Question:	I have a Rockwood Roo High breed with the bed that folds out over hitch .I need to know the height of jack from mounting bracket up to top of motor
Answer:	Currently, there isn’t Clever Cover specifically for Bulldog 500199 jack. However, one will be available soon for the Bulldog 500199. While not a perfect fit, the Clever Cover for the LCI jack could possibly fit your jack.

Product features

Husky 87247 Brute Electric Jack

We call our HB4500 power jack the Brute for good reasons. It has the brute strength to lift your trailer tongue safely and with much less effort, and the brute toughness to do it time after time, year after year.

A 6-inch adjustable drop down leg provides extended adjustment for a variety of terrains. The Brute also features a full 2-1/4-inch main tube, which is designed to fit most A-frame couplers. The Brute’s motor is powerful and efficient, providing a full 4,500 pounds of continuous lifting capacity, which is an excellent benefit when setting up weight distribution hitches. In addition, Brute’s moderate gear reduction produces a fast travel speed of 10 inches in as little as is 38 seconds, with a full range of 18 inches.

Lift efficiency is also aided by the Brute’s ball screw design, which reduces friction with ball bearings that roll through the threads on the Brute’s shaft and nut, which means the motor works less, draws less amperage, creates less heat and produces less noise. The ball screw design greatly increases motor and jack life.

Brute’s SmartStop technology senses the limits of the jack’s range and shuts down the motor without the hard mechanical stop common with other units. Plus, a 3-Sided LED Light System illuminates the entire working area, including the hitch head and weight distribution brackets on the A-frame.

Storage Bracket

Built-in connector storage bracket. Protects trailer’s cord end from weather.

3-Sided LED Light System

Illuminates entire working area with side lights directed towards WD brackets

Weather-Protected Switches

Operate lights and jack independently.

Rolling Friction

Brute was the first jack in its class to offer a ball screw for easy rolling friction, compared to the sliding friction of standard power jacks. Rolling friction means the motor works less, draws less amperage, creates less heat, reduces noise and increases motor and jack life.

Product description

Delivering on power, versatility, and durability like never before, the Power Stance Tongue Jack by Lippert Components was engineered with all of the same great features as our original power tongue jack — and then some. This jack can be operated with an industry-first 2-way to 7-way plug powering system. The Power Swap Auxiliary Cord can be added to any Power Stance — allowing you to easily connect your jack directly to your tow vehicle without worrying about draining your RV’s power. Plus, the Power Stance comes standard with an integrated safety chain storage ring. This means no more dragging chains across the ground. All you have to do is clip or hang your chains on the ring, and they stay clean, off the ground — and most importantly, out of your way.

• powerful solution — equipped with 2-way to 7-way powering system, so campers can use the power swap auxiliary cord to connect their jack to their tow vehicle, instead of draining power from their rv or manually cranking to lift and lower their rv. and when you’re done, store your cord in your jack’s built-in storage inlet to keep it safe from damage.
• innovative versatility — every jack comes with an integrated safety chain storage ring — allowing you to clip your chains out of your way instead of dragging them or wrapping them around your jack.
• stylishly durable — this jack comes with a sleek, durable plastic head-cover to keep it protected from the elements. the cover’s one-piece design is aesthetically pleasing and helps keep water from infiltrating the jack’s motor and gears.
• user-friendly operation — built-in led lights shine directly down on your trailer coupler — making it easy to see and operate your power stance jack at night. plus, these lights are designed to illuminate for 5 minutes, then turn off if not in use.
• thoughtful engineering — in the event of a power failure, this jack is equipped with an emergency manual crank option so you never have to worry about being stranded.

User questions & answers

Question:	does this come with the power swap cable
Answer:	No, it is an additional option

Product features

Power Stance Tongue Jack + Power Swap Auxiliary Cord

Say goodbye to manual cranks, unreliable power sources, and all-around inefficient jacks today. Upgrade your travels with the Power Stance Tongue Jack + Power Swap Auxiliary Cord — so you can lift, lower, and move on with your life at the push of a button.

Power Stance Tongue Jack

Delivering on power, versatility, and durability like never before, the Power Stance Tongue Jack was engineered with all of the same great features as our original power tongue jack — and then some.

2-WAY TO 7-WAY CAPABILITIES

Provides a 2-way to 7-way plug that connects your Power Stance directly to the power in your tow vehicle for a more convenient way to operate your tongue jack.

HASSLE-FREE POWER

This gives you a more convenient power source while you’re on the road, so you can say goodbye to unreliable power sources and draining your RV’s battery.

EASY STORAGE

 When you’re done using your Power Swap for the day, you can easily stow it in the designated storage compartment of your Power Stance to keep it out of your way and protected from damage.

Product description

This 5000 lb. 12V DC Uriah Products Electric trailer jack with 7-way connector is built with features that will make your next towing job quick and easy. The jack is equipped with an LED light for nighttime use along with automatic thermal protection to prevent damage from motor overheating and many other features.

• Lift range: 9" to 31.5" (including 4.5" Drop leg) 18" travel height.Up to 5000 lbs towing capacity, do not exceed maximum weight
• Easy to use switch for raising and lowering trailer
• Water resistant motor and one piece plastic housing. Oversized adjustable Footpad provides excellent stability
• Ball screw design and Brake motor increases the Lift efficiency and reduces friction compared to the Acme screw
• Quick plug-in 7-way connector with plastic holder to keep connector in place when not in use

User questions & answers

Question:	my hand crank jack has 2 1/4" diameter shaft. Will this fit without modification
Answer:	Hi, yes,it can be used on a SUV under 5 ton.
Question:	Just bought this... and getting no power to the 7 way connector, tried a different vehicle same thing.. any ideas
Answer:	Hi, we have 3 ton,5 ton car jack, no 6 ton.
Question:	Does the light have its own off on switch
Answer:	Hi, the total weight is 8.65 kg/19.07 lbs
Question:	Can this hook up directly to a Battery rather than using the 7 Pin adapter
Answer:	Yes, the compressor and fan turn off when the desired humidity level is reached.

Product features

Uriah Products Electric Jack 5000 lb. Capacity

The 5000 lb. 12V DC Uriah Products Electric Trailer Jack with 7-way connector is built with features that will make your next towing job quick and easy. The jack is equipped with an LED light for nighttime use along with automatic thermal protection to prevent damage from motor overheating.

Ball Screw Design Reduces Noise and Increases Lift Efficiency

The ball screw design and brake motor increases the lift efficiency and reduces friction compared to the acme screw design on competitor models.

Water-Resistant Housing. LED Light and Power Button

Water-resistant housing keeps the elements out, improving the life of your trailer jack. This model is equipped with an LED light for nighttime use and an easy-to-use power button that expands and retracts the jack.

Easy 7-Way Connector

Installing your trailer jack is quick and easy with a 7-way connector. The jack includes a built-in storage bracket with a cap to keep dust out.

Emergency Manual Crank Included

In case of power failure, the jack can be raised or lowered manually with this hand crank.

Oversized Footplate

The 4.5" drop leg includes an extra-large footplate, giving you added stability.

Easy Plug-And-Go System

Simply unplug your trailer connector, plug the jack into your vehicle’s pre-wired 7-way connector and push the easy-to-use switch. You’re ready to go! Uriah's UC500010 jack runs off your vehicle’s 12V battery … it’s as simple as that! No hard wiring required!

• 12V DC motor raises or lowers jack up to 18" (5,000lb lift capacity)
• Retracted Height: 9” from mounting plate to ground
• Extended Height: 27" (Total 31.5" with 4.5" drop leg)
• Jack automatically shuts off when it reaches the maximum or minimum height

Product description

5,000 lbs top wind A-frame Jack W/Zinc Adjustable Drop Leg. 3,000 lbs. Lift Capacity. 5,000 lbs. Support Capacity. 14" Travel. Bracket to bottom Retracted = 10.5". Bracket to bottom extended = 20". Bracket to top = 9". Outer Tube Diameter = 2-1/4". Inner Tube Diameter = 2". Zinc Adjustable Drop Leg: 8" of total adjustability (2" from hole to hole). 13" (H) x 5-1/4" (L). Will Hold 2,000 lbs. Durable exterior grade black powder coat finish. Large black handle uses a bolt head fastener. this is to ensure the handle does not pop off during operation of the jack. Handle arm has durable zinc finish for a nice look. Standard A-frame jack mounting hole dimensions are 3 inches apart center to center.

• 5,000 lbs top wind A-frame Trailer Jack w/Zinc Adjustable Drop Leg
• Durable exterior grade black powder coat finish.
• Large black handle uses a bolt head fastener this is to ensure the handle does not pop off during operation of the jack.
• Handle arm has durable zinc finish for a nice look
• Bracket to bottom retracted = 10.5" Bracket to bottom extended = 20" Bracket to top = 9" Tube Diameter = 2 1/4"

Product description

• Featured slim design to save space
• Stroke 20% faster but powerful and quiet!
• Bright LED light for night operation
• 55" long power cord
• 5 steps adjustable & removable 8" drop leg
• 5.5" extra large foot plate provide more stable support
• Rain water drain holes on foot plate
• One-piece motor cover and rain proof buttons
• Powder coated rust resistant outer tube in a black finish
• Zinc plated rust resistant inner tube
• Stainless steel screws/bolts outside motor cover never rust!
• Emergency detachable hand crank included
• Mounting hardware included
• Rain proof head cover included, a $10 value!
• 14" stroke travel lifting
• 3500lbs lifting capacity
• Fits 2-1/4" standard A frame trailer coupler mounting holes
• Mounting hardware included
• 12V operation
• Bracket height: 9-1/2" retracted, 31-1/2" extracted (w/drop leg fully extracted)

• Featured slim desgin, Stroke 20% faster but powerful and quiet.
• Bright LED light for night operation; Emergency detachable hand crank included,mounting hardware inlcuded! Waterproof head cover included!
• One-Piece motor cover preventing rain damge, Stainless steel screws/bolts outside motor cover never rust! Powder coated outer tube
• 8" 5-step adjustable drop leg; Over size 5.5" diameter foot plate, more stable support, rain water drain holes on foot plate.
• 14" lifting capacity; 3500lbs lifting capacity; 12V operation, 55" power cord

User questions & answers

Question:	how much room do you need for hand crank? I have a v nose trailer
Answer:	I don't understand the question but it mounts in the same bolt pattern as most common jacks including Atwood.
Question:	what experence have you had with this power jack? Does it have to have a cover to protect it from elements
Answer:	Yes it does come wit a manual crank handle
Question:	Will this work on a 3" hole pattern? It states 2 1/4" but looks to be slotted making it adjustable
Answer:	This product simply replaces the manual lift. Just unbolt the old and bolt on the new in the same mounting holes. The wiring can be done two different ways. You can mount a 12v battery to the trailer and get power from that. I chose to get my power from the vehicle that I am pulling the trailer with. It did require replacing the lifts factory plug. This is not hard to do. The new plug will come with a wiring diagram that shows you where each colored wire gets attached. The plug will have a open spot for constant 12v power. That's the location for the lift. You need to look at the vehicles plug to confirm that the constant 12v location is connected. If it isn't you can simply cut a short piece of wire and jump from the hot wire to the constant 12v location. It's not hard to do, you just have to concentrate on what your doing.
Question:	i have a jack-it bike rack on the front of my camper. the distance from the mounting plate to the top of the cover cannot exceed 21.5". will it work
Answer:	To the person that asked this question, did you purchase this jack? If so, did it fit under your front bed?

Product description

Bulldog Powered Drive A-Frame Tongue Jack, Rating 3,500 lbs., 22" of total travel - 14" screw travel and 8" drop leg travel. Measurements - Retracted Length: 9.75", Extended Length: 31.50", Clearance: 20.50". Deploys and hooks up easily at night with onboard LED courtesy light, angled to illuminate coupler. Works in case of power loss with emergency manual override capability, easily accessible from the top, crank included. Lasts for years with industry-leading BULLDOG performance, known worldwide for unmatched strength, durability, and side load capacity. Retains like-new appearance with corrosion-resistant surfaces. Color coordinating black case cover. Limited 5-year warranty.

• 3,500 lbs. lift capacity
• 22" of total travel - 14" screw travel and 8" drop leg travel
• Drop leg maximizes height capacity
• Integrated gearbox and motor; Emergency override crank included
• LED courtesy light, angled to illuminate coupler
• Positions quickly with 22" of total travel
• 3500 lb. lift capacity

User questions & answers

Question:	What is the distance between the mounting plate and bottom of the motor head? Looking to see if my truck tailgate will clear
Answer:	Correction: 14.25inches (20.5 is distance to top)
Question:	I have a forest river salem 27 rkss. has a manual tounge jack with a triangle, three bolt mount. will this match the bolt pattern
Answer:	There are two different bolt patterns on this electric jack. It mounted directly to the existing bolt holes on my camper, so between the two sets of holes, I would think it should.
Question:	What weight is needed for 37' forest river 2007 321fkd camper with dry weight of 8500 lbs. will a 3500 work or would a 4500 be needed
Answer:	I'm not sure but our camper is 26' with a gross weight of 8200 lbs I used the 3500 lbs it seems to work fine.The only problem is the LED light will come on when it rains I called mfg they said they had a problem with the switch. They sent a new switch but it still has the same problem so I disconnected the light other than that it's great
Question:	does it come with ring terminal
Answer:	It's been so long since the installation, but I am pretty sure it did come ring terminal. The installation of jack took no more than 5 minutes and i spent about 45 minutes on wiring. Mine wires straight to trailer light connector and the jack works when i turn the truck lights on.

Product description

The Quick Products 3000 Electric Tongue Jack boasts a 3,250 lbs. maximum weight capacity and delivers deluxe features at an unbeatable price. The 2.25" diameter outpost fits all 2.25" A-frame trailers and offers 18" of travel for easy attachment to equalizing bars. Dual LED working lights on the sides of the jack makes for easy night hookups. Beneath the jack housing, you’ll find heavy-duty hardened steel gears and water-resistant electrical components that are built to last. Each Quick Products Jack is backed by our exclusive one-year no-hassle warranty.

• The JQ-3000 electric tongue jack boasts a maximum lift capacity 3,250 lbs.
• 2.25" post diameter is the standard tongue jack size, making it easy to install into existing jack mounting holes
• Water-resistant electrical components and heavy-duty steel gears sit beneath the clean, sleek plastic housing
• Each JQ-3000 jack includes a manual crank override, dual LED work lights, and a heavy-duty weatherproof vinyl cover
• One-year no-hassle warranty

User questions & answers

Question:	What is the exact measurement from mounting plate to foot? I have clearance issues with my trailer
Answer:	yes
Question:	what is the red button on the back of the housing for
Answer:	Yes
Question:	I would like to know how far the ram section hangs below the mounting plate? Ground clearance can become an issue when the jack is completely retracted so this information would be helpful
Answer:	I put a block underneath
Question:	My jack arrived today and it only has a black ground wire coming out of it. Where is the wire that attaches to the positive terminal of the battery
Answer:	6 3/4" front to back, 9" bottom to top, 5" side to side. Back is almost even with the old crank up jack

Product features

Quick Products Electric Tongue Jack

Rated at 3,250 lbs., the Quick Products 3000 Electric Tongue Jack delivers outstanding power at an unbeatable price. Its water resistant electrical components and heavy duty hardened steel gears sit beneath a clean plastic housing, providing a sleek, eye-pleasing look that is sure to be the envy of everyone else in your campsite loop.

Dual LED Working Lights

Night hookup? No problem. With its simple toggle switch operation, turn on the equipped LED lights for easy visibility in even the darkest conditions. A clever directional shield keeps the light shining downward toward the job and not into your eyes.

Manual Override Crank

Death, taxes, and dead batteries. No matter how hard we try to avoid it, your battery may eventually go dead. Fortunately, that doesn't mean you have to be stuck on your lifted jack. The included manual override crank connects directly into the top of the jack and provides an efficient solution to the lack of power that won't leave you broken and exhausted.

Weatherproof Cover

Included with each jack is a heavy duty vinyl cover designed to safely and conveniently protect the jack from the elements. The drawstring cinch effectively holds the cover on the jack head. The cover is designed for both daily use and long term storage.