11 best axle shaft material

Product description

Feature:

1. Fit for SCX10 I / SCX10 II 1/10 RC car, to more accurately position and meet your demands.

2. Nylon injection‑molded shell and high‑quality metal material, internal steel gear and drive shaft, durable and wear‑resistant.

3. The pinion can increase the ground clearance and improve the angle of the drive shaft, with more stable performance.

4. With two metal drive shafts, there are larger load bearings around the gear set, generating a powerful power transmission system.

5. The total length is 215mm/8.5in, easy to install, and other installation accessories are attached. Well‑made and more in line with your needs.

Specification:

Condition: 100% Brand New

Item Type: Gear Front and Rear Axle

Shell Material: Nylon + Metal

Gear And Shaft Material: Steel

Color: Black

Type: RC Accessories

Gear Teeth: 38T/15T

Colour: Black

Quantity: 1 (Set)

Total Length: 215mm/8.5in

Width Between Coupling Pins: 180mm/7in

Transmission Shaft Size: Approx. 110-140mm/4.3-5.5in

Fitmeny: Fit for SCX10 I / SCX10 II 1/10 RC Car.

Package List:

1 xGear Front and Rear Axle   

2 x Transmission Shaft

4 x Combiner

4 x Screw

4 x Pin

4 x Nut

Note:

1. Please allow a slight error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• Nylon injection‑molded shell and high‑quality metal material, internal steel gear and drive shaft, durable and wear‑resistant.
• With two metal drive shafts, there are larger load bearings around the gear set, generating a powerful power transmission system.
• The pinion can increase the ground clearance and improve the angle of the drive shaft, with more stable performance.
• The total length is 215mm/8.5in, easy to install, and other installation accessories are attached. Well‑made and more in line with your needs.
• Fit for SCX10 I / SCX10 II 1/10 RC car, to more accurately position and meet your demands

Product description

GSP CV Axles are engineered to provide OE fit, form, and function. Manufactured using only premium grade materials which, when coupled with precise machining and balancing, ensures smooth, vibration free performance under all driving conditions. Since boot failure is the main cause of CV axle failure, our CV Axle Assemblies use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity. This means the the grease stays where it belongs - at the joint - which prevents premature wear and component failure. All of our CV Axle Assemblies are factory lubricated with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance. Each of our axles is thoroughly inspected for quality and workmanship before it goes in the box - to ensure you get the best quality axles on the market. And because we believe in the exceptional quality of our components, all axles come with a limited lifetime warranty! Note: All GSP axles are equipped for use with Anti-Lock Brakes (if originally available) and come with an ABS sensor ring installed. Sensor ring will not affect installation or operation on non-ABS equipped vehicles. GSP Automotive group is the leading manufacturer of automotive driveline components in the worldwide automotive aftermarket. Our company was established in 1985 to produce the highest quality Drive Shafts, CV Axle Assemblies, CV Joint Kits, Hub Assemblies, Wheel Bearings and rubber-to-metal components. With an annual production capacity exceeding 13 million CV joint kits, 4 million drive shafts, 1.5 million hub assemblies and 10 million rubber-to-metal components, GSP has the manufacturing expertise you can rely on. In addition, GSP maintains an ISO/TS16949 certification, so you can rest assured that our quality standards are built into every component we make. We also work hard to be an environmentaly friendly company, incorporating the highest standards for processes and energy savings, all in an effort to do our part in preserving the beautiful world around us.

• GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
• Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
• Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
• All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
• Left or Right Front (Driver or Passenger Side); 22-7/16 inch compressed length; 28 spline outer joint; bolt on inner joint
• For select Nissan vehicles (verify fitment details with fit checker above): 1998-04 Frontier, 2000-04 Xterra

User questions & answers

Question:	can this fit 2003 4wdrive nissan frontier
Answer:	Thank you for the inquiry. The requested part application fits 2014 Subaru Forester.

Product description

GSP CV Axles are engineered to provide OE fit, form, and function. Manufactured using only premium grade materials which, when coupled with precise machining and balancing, ensures smooth, vibration free performance under all driving conditions. Since boot failure is the main cause of CV axle failure, our CV Axle Assemblies use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity. This means the the grease stays where it belongs - at the joint - which prevents premature wear and component failure. All of our CV Axle Assemblies are factory lubricated with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance. Each of our axles is thoroughly inspected for quality and workmanship before it goes in the box - to ensure you get the best quality axles on the market. And because we believe in the exceptional quality of our components, all axles come with a limited lifetime warranty! Note: All GSP axles are equipped for use with Anti-Lock Brakes (if originally available) and come with an ABS sensor ring installed. Sensor ring will not affect installation or operation on non-ABS equipped vehicles. GSP Automotive group is the leading manufacturer of automotive driveline components in the worldwide automotive aftermarket. Our company was established in 1985 to produce the highest quality Drive Shafts, CV Axle Assemblies, CV Joint Kits, Hub Assemblies, Wheel Bearings and rubber-to-metal components. With an annual production capacity exceeding 13 million CV joint kits, 4 million drive shafts, 1.5 million hub assemblies and 10 million rubber-to-metal components, GSP has the manufacturing expertise you can rely on. In addition, GSP maintains an ISO/TS16949 certification, so you can rest assured that our quality standards are built into every component we make. We also work hard to be an environmentaly friendly company, incorporating the highest standards for processes and energy savings, all in an effort to do our part in preserving the beautiful world around us.

• GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
• Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
• Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
• All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
• Left Front (Driver Side); 26-9/16 inch compressed length; 28 spline outer joint; 29 spline inner joint; 50 tooth ABS ring
• For select vehicles (verify fitment details with fit checker above): ACURA: 2001-03 CL, 1999-03 TL; HONDA: 1998-02 Accord

Product description

SVL rear axle shafts are engineered and tested to meet the aftermarket requirements set by the global leader in driveline products. To ensure that you are getting the best blend of coverage, performance, and value. Choose the SVL brand of axle shafts, ring and pinions, inner gears, u-joints and center bearings.

• Heat treated for optimal hardness and durability
• Rigorously tested for: Static strength, torsional fatigue and rotating and bending torque
• Location: Right Hand and Left Hand

User questions & answers

Question:	will this fit on an 01 4x4 silverado with drum brakes
Answer:	You probably want to buy a pizza peel (or paddle) as well so that you can put all your toppings on and then place it on the hot stones.

Product description

Good mechanical properties, good wear resistance, excellent fluidity, suitable for cold welding without temperature.Very practical and easy to weld.Light, small volume, very easy to transport.



Specification:

Material: Brass

Shape: round bar

Color: brass tone

Length: 30cm/11.8inch

Diameters: 10mm/12mm

Quantity: 1



Feature:

Has excellent ductility and smooth fluidity.

Widely used in gear shafts, motor shafts, short support shafts, bushing models, miniature shafts, aircraft models, ship models, car models.

Ideal for repairing irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower shells and casings



Package Included:

1x brass rod



Service:

If you have any problem with this product, please feel free to contact us. And we will solve your problem as soon as possible.

• Wide Applications --- These rods can be cut and formed into replacement parts for almost anything, you are only limited by your imagination. Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
• Scope Of Application--- Suitble for high speed machining operations and intricate parts of manufacture
• Easy To Cut --- It is the combination of machinability, thread rolling and knurling
• Good Quality-- Made of premium brass, good strength, high resistance to corrosion
• What You Get --- We have prepared 1pcs high quality brass rod for you to meet any of your needs and you deserve them.

Product description

Axles from Yukon Gear and Axle are made from high quality metals and alloys to provide higher strength over OEM for performance and replacement applications. Each axle is engineered for a specific differential installations. Yukon Axles can be found off-road, on the street and at the track.

• Yukon front 4340 Chrome-Moly replacement axle kit for Dana 30 ('84-'01 XJ, '97 and newer TJ, '87 and newer Wrangler) with 27 splines
• Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower
• Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life
• This kit comes with inner and outer axles for both left and right sides along with Dana u-joint
• Limited Lifetime covers manufacturing defects and axle breakage for as long as you own the vehicle

User questions & answers

Question:	Just ordered a set of axles and I’m wondering if something does happen what do I do to get the warranty
Answer:	No. Replacement # 70610 Heri
Question:	Will these work with abs on a 93 zj and will I have to transfer the tone rings
Answer:	It was an exact match for a 2003 4wd Xterra...
Question:	This is probably a dumb question, but how do you engage 4x4 with vacuum delete
Answer:	This fits up to chassis number up to the number ending in 552205. After that chassis number this is not correct for a 2014 Forester AWD
Question:	Will this fit my 2000 jeep wrangler sport
Answer:	Hi, sorry for the incorrect info, the part should only fit the front, for the rear part, the part number should be NCV66925 for 2010 Subaru Outback.

Product features

Axle Kits for Your Vehicle

Yukon Gear and Axle offers an extensive line of high performance and general replacement axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.

High quality alloys and the latest in heat-treating technologies provide strong axles!

Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street or at the track.

From inner axles, outer axles, u joints, complete axle kits, we've got you covered.

From inner axles, outer axles, u joints, complete axle kits, we've got you covered.

10 year coverage against Manufacturer defects.

YUKON GEAR & AXLE

OEM Replacement Rear Axle Shafts

Many people don’t realize that over time axles wear out and need to be replaced. Yukon manufactures OEM axles to fit most domestic rear-wheel-drive passenger cars as well as 2WD and 4WD pickup trucks and SUVs. Yukon’s performance rear axles are heat-treated deeper than the factory axle shafts to ensure added shaft strength and durability in the bearing and seal area.

High-Performance Rear Axles

Rear axles are one of the most important parts of a hot rod or extreme-built 4x4. A weak axle can leave you stranded when you least expect it, so don’t compromise. Get the best, get the Yukon advantage. Yukon’s high-performance rear axles are made from high quality 1541H and 4340 Chromoly steel. These axles are engineered to stand up to the extreme conditions of hard street driving, trail running or weekends at the track.

4340 Chromoly Front Axles for Dana 30, 44, 60 & GM 8.5

If you’re looking for strength and durability, we can help. Yukon Replacement Chromoly front axles for Dana 30, 44, 60 and GM 8.5 are made from only the best steel available and are engineered to withstand the most extreme off-road conditions. Yukon Chromoly axles use a state of the art, dual heat-treating process to provide maximum strength and long life. This dual heat-treating along with the high-quality material gives you a 35-40% strength increase over stock axle shafts.

Product description

GSP CV Axles are engineered to provide OE fit, form, and function. Manufactured using only premium grade materials which, when coupled with precise machining and balancing, ensures smooth, vibration free performance under all driving conditions. Since boot failure is the main cause of CV axle failure, our CV Axle Assemblies use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity. This means the the grease stays where it belongs - at the joint - which prevents premature wear and component failure. All of our CV Axle Assemblies are factory lubricated with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance. Each of our axles is thoroughly inspected for quality and workmanship before it goes in the box - to ensure you get the best quality axles on the market. And because we believe in the exceptional quality of our components, all axles come with a limited lifetime warranty! Note: All GSP axles are equipped for use with Anti-Lock Brakes (if originally available) and come with an ABS sensor ring installed. Sensor ring will not affect installation or operation on non-ABS equipped vehicles. GSP Automotive group is the leading manufacturer of automotive driveline components in the worldwide automotive aftermarket. Our company was established in 1985 to produce the highest quality Drive Shafts, CV Axle Assemblies, CV Joint Kits, Hub Assemblies, Wheel Bearings and rubber-to-metal components. With an annual production capacity exceeding 13 million CV joint kits, 4 million drive shafts, 1.5 million hub assemblies and 10 million rubber-to-metal components, GSP has the manufacturing expertise you can rely on. In addition, GSP maintains an ISO/TS16949 certification, so you can rest assured that our quality standards are built into every component we make. We also work hard to be an environmentaly friendly company, incorporating the highest standards for processes and energy savings, all in an effort to do our part in preserving the beautiful world around us.

• GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
• Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
• Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
• All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
• Right Front (Passenger Side); 36-1/8 inch compressed length; 26 spline outer joint; 23 spline inner joint; 48 tooth ABS ring
• For select FWD vehicles with automatic transmission (verify fitment details with fit checker above): PONTIAC: 2003-08 Vibe; TOYOTA: 2003-08 Corolla, 2003-08 Matrix

User questions & answers

Question:	Does this replace an OEM
Answer:	You can’t get replacement. I bought this bunny hutch and received it broke on the tray and other places. They could not replace it but gave me my money back which made me happy. But it’s poorly made would never buy this ever again. And also keep this in mind if used for bunnies they love to chew on wood so they will eventually ruin it.

Product description

GSP CV Axle extension shafts are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance. All axles are thoroughly inspected for quality and workmanship before leaving the factory to ensure only the highest consumer satisfaction and, because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty. Fits select Chrysler Aspen, Dodge Dakota, Durango, and Ram 1500 vehicles. Extension shaft only, does not include CV Axle. GSP automotive group is the leading manufacturer of automotive driveline components in the worldwide automotive aftermarket. Our company was established in 1985 to produce the highest quality Drive Shafts, CV Axle Assemblies, CV Joint kits, Hub Assemblies, Wheel Bearings and rubber-to-metal components. With an annual production capacity exceeding 13 million CV joint kits, 4 million drive shafts, 1.5 million hub assemblies and 10 million rubber-to-metal components, GSP has the manufacturing expertise you can rely on. In addition, GSP maintains an ISO/TS16949 certification, so you can rest assured that our quality standards are built into every component we make. We also work hard to be an environmentally company, incorporating the highest standards for processes and energy savings, all in an effort to do our part in preserving the beautiful world around us

• GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
• Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
• Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
• All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
• Left Front (Driver Side); 21-9/16 inch compressed length; 36 spline outer joint; bolt on inner joint
• For select vehicles (verify fitment details with fit checker above): AUDI: 2000-02 TT; VOLKSWAGEN: 1998-05 Beetle, 1999-14 Golf, 1999-10 Jetta

Product description

Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.



Vehicle model years this part fits:

Toyota Tundra: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

• Easier installation - this loaded axle assembly includes a pre-assembled new axle shaft, wheel bearing, hub and backing plate
• Time saver - eliminates frustrating, unpredictable work required to replace bearings without damaging other components
• Simpler solution - eliminates the need to use potentially dangerous shop press to perform complete bearing repair
• Quality tested - this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
• Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

Product description

GSP CV Axles are engineered to provide OE fit, form, and function. Manufactured using only premium grade materials which, when coupled with precise machining and balancing, ensures smooth, vibration free performance under all driving conditions. Since boot failure is the main cause of CV axle failure, our CV Axle Assemblies use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity. This means the the grease stays where it belongs - at the joint - which prevents premature wear and component failure. All of our CV Axle Assemblies are factory lubricated with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance. Each of our axles is thoroughly inspected for quality and workmanship before it goes in the box - to ensure you get the best quality axles on the market. And because we believe in the exceptional quality of our components, all axles come with a limited lifetime warranty! Note: All GSP axles are equipped for use with Anti-Lock Brakes (if originally available) and come with an ABS sensor ring installed. Sensor ring will not affect installation or operation on non-ABS equipped vehicles. GSP Automotive group is the leading manufacturer of automotive driveline components in the worldwide automotive aftermarket. Our company was established in 1985 to produce the highest quality Drive Shafts, CV Axle Assemblies, CV Joint Kits, Hub Assemblies, Wheel Bearings and rubber-to-metal components. With an annual production capacity exceeding 13 million CV joint kits, 4 million drive shafts, 1.5 million hub assemblies and 10 million rubber-to-metal components, GSP has the manufacturing expertise you can rely on. In addition, GSP maintains an ISO/TS16949 certification, so you can rest assured that our quality standards are built into every component we make. We also work hard to be an environmentaly friendly company, incorporating the highest standards for processes and energy savings, all in an effort to do our part in preserving the beautiful world around us.

• GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
• Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
• Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
• All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
• Left or Right Front (Driver or Passenger Side); 20-9/16 inch compressed length; 31 spline outer joint; bolt on inner joint
• For select Dodge vehicles (verify fitment details with fit checker above): 1997-99 Dakota, 1998-99 Durango

Product description

GSP CV Axles are engineered to provide OE fit, form, and function. Manufactured using only premium grade materials which, when coupled with precise machining and balancing, ensures smooth, vibration free performance under all driving conditions. Since boot failure is the main cause of CV axle failure, our CV Axle Assemblies use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity. This means the grease stays where it belongs - at the joint - which prevents premature wear and component failure. All of our CV Axle Assemblies are factory lubricated with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance. Each of our axles is thoroughly inspected for quality and workmanship before it goes in the box - to ensure you get the best quality axles on the market. And because we believe in the exceptional quality of our components, all axles come with a limited lifetime warranty! Note: GSP axles are equipped for use with Anti-Lock Brakes (if originally available) and come with an ABS sensor ring installed. Sensor ring will not affect installation or operation on non-ABS equipped vehicles. GSP Automotive group is the leading manufacturer of automotive driveline components in the worldwide automotive aftermarket. Our company was established in 1985 to produce the highest quality Drive Shafts, CV Axle Assemblies, CV Joint Kits, Hub Assemblies, Wheel Bearings and rubber-to-metal components. With an annual production capacity exceeding 13 million CV joint kits, 4 million drive shafts, 1. 5 million hub assemblies and 10 million rubber-to-metal components, GSP has the manufacturing expertise you can rely on. In addition, GSP maintains an ISO/TS16949 certification, so you can rest assured that our quality standards are built into every component we make. We also work hard to be an environmentally friendly company, incorporating the highest standards for processes and energy savings, all in an effort to do our part in preserving the beautiful world around us.

• GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
• Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
• Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
• All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
• Left Front (Driver Side); 26-7/16 inch compressed length; 27 spline outer joint; 27 spline inner joint; 46 tooth ABS ring
• For select 2007-12 Hyundai Elantra vehicles (verify fitment details with fit checker above)

User questions & answers

Question:	Does it fit my 2011 hyundai elantra touring gls 2 l engine with automatic transmission
Answer:	Dear Sir/Madam, Thank you for your interest in our products. We would like to inform you that the bunny hutch that you are interested in does not have a ramp that goes from top to bottom since the 2 compartments are separate. Please let us know if we can assist you further. Have a nice day! vidaXL