8 best power cords with fused

Power Cords with Fuses

Power cords equipped with fuses are primarily designed to protect electrical equipment and the users from potential overcurrent situations, which could result from faults or short circuits.Here's a deeper dive into the subject:

Purpose of Fuses: Fuses are safety devices that provide overcurrent protection to an electrical circuit. Their essential component is a metal wire or strip that melts when too much current flows through it, thereby interrupting the circuit and preventing potential damage or fire.
Where They're Used: Fused power cords are often found in various applications, from household appliances to automotive equipment. In the automotive context, for example, these might be used for accessories like portable refrigerators, heaters, or other devices that plug into a car's power outlet.
Advantages:
- Safety: The primary advantage of a fused power cord is safety. If a device malfunctions or there's a short circuit, the fuse will blow, disconnecting the power and preventing further damage or potential fire.
- Cost-Effective: Fuses are relatively cheap to replace. When a fuse blows, you often just need to replace the fuse itself, rather than the entire device or power cord.
- Compact Design: Fused power cords don't require additional external fuse holders or boxes, which can save space, especially in tight areas like car interiors.
Choosing the Right Fuse: It's essential to use the correct fuse rating for the device you're protecting. Using a fuse that's rated for a higher current than necessary can defeat its purpose, while a fuse rated too low might blow unnecessarily.
Replacing Fuses:
- Always disconnect the power before attempting to replace a fuse.
- Check the rating on the blown fuse and ensure you replace it with one of the same rating.
- Examine the device or circuit for potential reasons the fuse might have blown (e.g., frayed wires, loose connections, or a malfunctioning device). Simply replacing a blown fuse without addressing the underlying cause may result in the new fuse blowing again.
Fuse Types:
- Fast-Blowing Fuses: These fuses react quickly to overcurrent situations. They're often used in sensitive electronics where even a brief overcurrent can cause damage.
- Slow-Blowing Fuses: Also known as "time-delay" fuses, these take longer to blow, allowing for temporary current surges (like when a motor starts up) without blowing prematurely.
Limitations:
- Fuses can only protect against overcurrent situations. They won't protect against other electrical issues like under-voltage or power surges.
- Some fuses, especially in older devices, might not be user-replaceable, requiring the assistance of a professional or the replacement of the entire power cord.

In summary, fused power cords offer an added layer of safety against overcurrent situations, especially in contexts where electrical faults could result in injury or damage. Proper maintenance and understanding of these cords are essential to ensuring they function correctly and provide the intended protection.

Below you can find our editor's choice of the best power cords with fused on the market

Parts Express BS 1363 UK 2-Pole Plug to C7P Polarized 6 ft. Power Cord Fused 10A 18/2

Based on 1 reviews Check latest price

Product description

18 AWG, UK AC power cord with an IEC Type-G, 3-prong male plug to an IEC Type-C7P, 2-pin "D-style" female socket.

ACP1011 BS1363 UK Standard Fused Plug to IEC C13 6 Foot Power Cord with 6 Country certifications. Suitable for use as a UK BS1363 PC Computer, Monitor or Printer Power Cord.

Check latest price

Product description

UK to C13 power cord: BS1363 standard UK fused 3 pin plug to IECC13 with H05VV-F 0.75mm_ black wire, 6 feet. Rated up to 10A 250V and carries the following approvals: British ASTA, Singapore PSB, Hong Kong HKSI and Saudi Arabia SASO. This power cord is also known as the BS1363 to IEC C13 mains power lead or BS 1363 to C13 mains cable.

BS1363 C13 power cord commonly used for desktop computers, monitors, or any C13 cord device
BS1363 UK fused standard 10A plug
IEC 60320 C13 molded 10A receptacle
Carries ASTA, HKSI, G Mark, PSB Spring and SASO approvals as well as RoHS and REACH compliance
Fully molded ergonomic design with shock resistant insulated prongs as well as safety fuse

User questions & answers

Question:	What is the amperage of the fuse
Answer:	I saw no reference to the age of the bush in the directions and so I would assume "yes".
Question:	How long is the cord
Answer:	Stopped all rust problems last growing season. Very good product.

[UL Recognized] Chanzon Car 2-Socket Splitter Cigarette Lighter 7inch / 18cm 18AWG Power Supply Cord 15A Fused DC Power 12 24 Volt Socket 2 Way Y Adapter 2-Way Extension SPT-1 Charger

Based on 278 reviews Check latest price

★This Heavy Duty Adapter Doubled the Power Port in Your Car with Pure Copper UL certified Wire, Provide Stable Current to your Device which Maintain a Healthy Device Condition.Double PVC Jacket for Best Insulation,105℃ Heat Resistant,Fused 15amp, No Electric Shock Risk,No Fire Risk.
★Premium Quality: Accurate Size Dual Sockets with Tight Connection | 4000 Times Bending Performance | SPT-1 Cords | Bakelite Plugs end High Compression Resist (See picture 2,3,4,5)
★Safety: Red LED indicator light | Two splitter Total 10A Current 18 awg gauge | 15A Fuse | Cord Length: 7'' / 18 cm
★Detail: Male Plug to 2 Way Split Female Outlet Cigerate Socket, Two Female Receptacle 18 ga cord
★Application: Increase Cigarette Lighter Power Port in your Car using 2way splitter Power Charger Cable, Two 12V/24V cigarette lighter sockets perfectly fit for your GPS, dash cam, seat heater, car refrigerator, vacuum cleaner, air purifier and other car products. Widely used in car, RV, truck, boat, travel trailer, pickup, van while traveling.

User questions & answers

Question:	I have a warning light plugged into it and the light has an on/off switch on the cigarette plug, can I leave them both plugged into the car while off
Answer:	5 amp
Question:	Is this spliter adapter strong enough to use two 12v extender cables powering a 18watt led light Each? Thank you
Answer:	ABOUT 6 FOOT.
Question:	Can I leave it plugged in the cigarette lighter socket all the time (no devices attached) without draining the car battery
Answer:	The label will tell you that information. I can't imagine why you would use it on Petunias...
Question:	How feet is that item
Answer:	If caught early enough it can help.

Product features

Cigarette Lighter Male 2-way splitter Socket

This Cigarette Lighter with Pure Copper UL Certificated Wire, Provide Stable Current.Double PVC Jacket for Best Insulation,105℃ Heat Resistant,Fused 15amp, No Electric Shock Risk,No Fire Risk.

Why Choose Us

Real 18AWG Wire

Compare to other "18awg" product, We measure wire gauge for inner copper wire not PVC jacket.

RoadPro RPPS-220 Platinum Series 12V 3-Pin Plug Fused Replacement CB Power Cord

RoadPro

Based on 1 reviews Check latest price

Product description

Need a replacement power cord for your CB Radio? The RoadPro RPPS-220 is 3-pin plug, with a built-in fused cigarette lighter plug can be used to replace power cords on most CB Radios. The green indicator light will let you know if the cord is plugged in correctly and working.

3-Pin, 2 Wire 16-Gauge Heavy Duty Copper Wire
Used to Replace Power Cords on Most CB Radios
Built-In Fused Cigarette Lighter Plug w/Green LED Indicator & Finger Grip
Dual Spring Contacts for Maximum Conductivity
Heavy Duty Strain Reliefs

User questions & answers

Question:	Does this work with a uniden bearcat
Answer:	2-10 miles. For best results, the truck needs to be bonded, ideally with braided grounding straps. Antenna mount to bed, bed to frame rails, bed to cab. If you want range, buy a gmrs license or take a amateur radio exam. You get far better range and are likely to have repeaters in the area. *the medium spring in this kit is too weak, you need a heavy spring. Went through two of these antennas. Make life easy, get a firestik
Question:	Will this fit a Midland International model 77-882, I found it with nothing but the radio and need a cord
Answer:	It can be installed on the dash but I don’t recommend this radio. It’s a knockoff and won’t last long at all. I bought 2 before my local cb shop opened them up and realized it’s not even a real uniden.
Question:	Will this fit my Midland 5001z CB radio
Answer:	Yes, it does.
Question:	How many amps is the fuse in this item? Thank you
Answer:	Yes, it does

Product features

RoadPro RPPS-220 Platinum Series 12V 3-Pin Plug Fused Replacement CB Power Cord

This replacement CB power cord is made of 16-gauge heavy-duty copper wire and has heavy-duty strain reliefs. It can be used to replace power cords on most CB radio and has a built-in fused cigarette lighter plug with a green LED indicator and finger grip. the dual spring contacts provide for maximum conductivity. It is important to check proper polarity (+/-) before connecting. 2 wire, 2-Pin plug and 12-volt plug.

3-Pin, 2 wire 16-gauge heavy-duty copper wire
Replaces power cords on most CB radios
Built-in fused plug with green LED indicator and finger grip
Dual spring contacts for maximum conductivity

RoadPro RPPS-219 Platinum Series 2-Wire 2-Pin Plug/12V Plug Fused Replacement CB Power Cord

Based on 59 reviews Check latest price

16-Gauge Heavy Duty Copper Wire
Heavy Duty Strain Reliefs
Check Proper Polarity (+/-) Before Connecting
Built-In Fused Cigarette Lighter Plug with Green LED Indicator and Finger Grip

User questions & answers

Question:	can I use it for my igloo cooler
Answer:	Yes you can
Question:	What Amp fuse does it have or handle? I melted my current plug for the air pump
Answer:	Hi, it should work i use mine with a 25 watt vhf radio 12 volt and one mini bluetooth radio transmitter to play the music from my phone to my car radio. Hopes this answer your question
Question:	What is the length of the cable
Answer:	Yes....with no devices attached there is no drain of the car battery. No different than your lighter socket with no devices attached. It just gives you two lighter sockets this way with 7 inches of cord. Leaving devices attached will (if they are powered on) have a drain on the battery.
Question:	Fuse is replaceable
Answer:	From end to end about 13 inches.

ACP1045 UK BS1363 Standard Fused Plug to IEC C5 Laptop 6 Foot (1.83 Meters) Power Cord with UK ASTA Certification. Most commonly Used as a BS1363 UK or British Laptop Power Cord.

Based on 7 reviews Check latest price

Product description

UK to C5 power cord: BS1363 UK fused standard 3 pin plugto IECC5 with H05VV-F 0.75mm_ wire black power cord, 6 feet with the following approvals: British ASTA, Singapore PSB, Hong Kong HKSI and Saudi Arabia SASO. This British power cord is also known as the BS1363 to IEC C5 mains power lead or BS 1363 to C5 mains cable.

BS1363 6 ft C5 power cord often used for laptop computers or any C5 cord device
BS1363 UK fused standard 3A plug
IEC 60320 C5 laptop 2.5A receptacle
Carries ASTA, HKSI, G Mark, PSB Spring and SASO approvals as well as RoHS and REACH compliance
Fully molded ergonomic design with shock resistant insulated prongs as well as safety fuse

RoadPro RPPSCBH-2CP Platinum Series 2-Wire 2-Pin Plug/12V Plug Fused Replacement CB Power Cord

RoadPro

Based on 34 reviews Check latest price

16-Gauge Heavy Duty Copper Wire
Heavy Duty Strain Reliefs
Check Proper Polarity (+/-) Before Connecting
Built-In Fused Cigarette Lighter Plug with Green LED Indicator and Finger Grip

User questions & answers

Question:	How long is the cable
Answer:	It would depend on your cooler's current draw. If its under 15 amps, I'd say yes.
Question:	Does this support 18 gauge wires? I'm trying to light my led kit
Answer:	5 amp
Question:	how many amps is the fuse
Answer:	At least 3ft
Question:	can fuse be replaced
Answer:	Yes it is, Just unscrew the metal ring off the end of the big plug and the fuse is right there.

3 Pin 2 Wire CB Radio Fused Power Cable

Based on 113 reviews Check latest price

Product description

Roadpro 12-Volt fused power cord is manufactured with heavy duty 16- Gauge Copper Wire leads. It features a 3-pin, 2-wire fused power cord. Used to replace power cords on most CB radios.

ROADPRO 3-Pin Plug/Hardwire Fused Replacement CB Power Cord - 2 Wire RPPS-227
Red/Black Power wire with stripped ends.
Fis most CB radios with 3-pin rear power socket.

User questions & answers

Question:	Will it work on a cobra 29 lx
Answer:	No it will not fit a ft857D. The 857D being a higher power radio needs a larger more stronger higher rated connector. Here is what you need for a ft857d. see this one https://www.amazon.com/Short-Power-Supply-FT-857D-FT-897D/dp/B071FZWDVN/ref=sr_1_3?dchild=1&keywords=ft857d+power+cord&qid=1596374117&s=electronics&sr=1-3
Question:	Will it work on a cobra 29 lx
Answer:	Yes, the description says it works on ICOM and since I am not familiar with the connector on your radio I can't give you a 100% yes. The pictures on Icom show the connector and it looks the same. If you are an Amateur Radio Operator, the you should have no problem realizing that it should work. It should and if it doesn't, well then you can send it back...after all it is Amazon.
Question:	Will this work with bearcat
Answer:	I tend to believe the photo if it’s the item, if it says actual product photo it should be. But I would ASK the SELLER to help clear that up. They may not know the ad is confusing. The power cord I ordered for my Yeasu came with agc fuses as pictured.
Question:	Will it power a stryker
Answer:	If the power cord on your radio uses a T connection it should work. I use it for a Kenwood and B-Tech mobile unit.
Question:	will this work with 857d radio
Answer:	I believe a couple of feet, should say on the product description
Question:	Will this work on a Icom ic2730A
Answer:	i would think so since led's require very little juice
Question:	The picture shows round glass fuse (agc type) holders, and the descrption says "blade type [atc] fuse holder and fuse". which type is it
Answer:	4 AMP IF I REMEMBER CORRECTLY
Question:	Will this fit yaesu mobile FT
Answer:	Of course! Its a standard 1/4" glass fuse :)