12 best apache fuel pumps

Product description

Apache automatic fuel products kit. Required for use with 12 or 110 volt "eletric" pumps. Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil. Kit includes farm fuel transfer hose with static wire, nozzle splash guard, automatic nozzle and swivel. Not recommended for bio-diesel.

User questions & answers

Question:	How long is the hose
Answer:	You can connect shorter hoses together if you can not find a kit with 20 ft. 3/4 normal pipe thread nipple from the hardware store
Question:	How much pressure is required to operate? Will a 12 volt toy hauler pump suffice
Answer:	It works under pressure, usually an electric pump. We bought it to fuel up our snowmobiles from a large gas container and gravity didn't work.
Question:	Do they make a similar kit with a 20' hose
Answer:	No it doesn’t
Question:	Can I use this kit in a normal fuel dispenser? Not in a electric pump
Answer:	Yes, it has union ends on both sides. Note, you have to use PVC glue and cleaner to install this check valve.

Product description

Apache automatic fuel products kit. Required for use with 12 or 110 volt "eletric" pumps. Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil. Kit includes farm fuel transfer hose with static wire, nozzle splash guard, automatic nozzle and swivel. Not recommended for bio-diesel.

• Automatic fuel products kit
• Required for use with 12 or 110 volt "electric" pumps
• Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil. Spout Inside Diameter (inch)- 0.964. Spout Outside Diameter (inch)- 1.19
• Kit includes: 1" x 14' fuel transfer hose with static wire, 1" automatic nozzle with 1-13/16" spout, 1" fuel swivel, for ease of fueling and to prevent kinking, and nozzle splash guard
• Designed for pump driven fuel syetems with a minimum of 15 PSI and a maximum of 43 PSI. Do not use on gravity pump flow systems.

User questions & answers

Question:	Why isn’t this recommended for bio diese
Answer:	It seems to do well here in Alaska
Question:	Trae 10 mangueras y 10 boquillas
Answer:	Aluminum
Question:	Will this hose get stiff in cold weather
Answer:	14' long
Question:	What's the nozzle material? Thank you
Answer:	Not quite sure what you are asking. The nozzle will work with very little pressure and will squirt out 20gpm if you have a pump to push that. I have a 20GPM Fillright and power with a 12v car battery and get 6 gpm when fully charged and less as the battery runs down. This nozzle auto shut off did break after a couple seasons of use.

Product description

Apache manual fuel products kit. Required for use with 12 or 110 volt "electric" pumps. Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil. Kits includes farm fuel transfer hose with static wire, nozzle splash guard, UL approved manual nozzle. Not recommended for bio-diesel.

User questions & answers

Question:	So, is this a manual hand pump? Why does it say it requires an electric pump if it's "manual
Answer:	You need special tools to work on hydraulic or fuel lines because they are ment to be used on pressurized systems. If the line blows apart after you do this only you are at fault.
Question:	Will this work to replace hose for 11 gallon Duramax Flo n Go gad dispenser
Answer:	Threw the splash guard away, nozzle is gravity fed from a 300 gal tank 6 feet from the ground just a slow flow into my kubota L4740. Nice.
Question:	Can i shorten the hose and reattach the thread end back on
Answer:	I have no glue.
Question:	Has the seller / manufacturer resolved the undersized nozzle / oversized splash guard issue yet
Answer:	Trae 1 manguera y una boquilla lista para instalar. La boquilla tiene buen flujo

Product description

Apache manual fuel products kit. Required for use with 12 or 110 volt "electric" pumps. Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil. Kits includes farm fuel transfer hose with static wire, nozzle splash guard, UL approved manual nozzle. Not recommended for bio-diesel.

User questions & answers

Question:	Does the nozzle have a lock, so that you can lock it open
Answer:	I believe so, I know this valve is very quiet.

Product description

Swivel helps prevent twisting, binding, and kinking of fuel transfer hose. Swivels a full 360. 3/4'' swivel for use with Apache fuel transfer hose and fuel nozzles.

• Swivel end for use with Apache fuel transfer hose and fuel nozzles
• Product is Manufactured in China
• This product meets customer Requirement

User questions & answers

Question:	Will this swivel handle 50 PSI chilled water
Answer:	Hello Thanks for reaching out about info for the pump. This pump needs a minimum of a 5 horsepower engine. Thanks, Customer Care RuggedMade
Question:	Where is this item manufactured
Answer:	Thanks for reaching out to us. These bolt holes are 2 inches on center, please review the photos to see the specs to ensure we are referring to the same area. Thanks, Customer Care RuggedMade
Question:	Can I use this fuel swivel to attach a propane/lp line to my commercial gas cooking equipment
Answer:	Hello Thanks for reaching out to us about the pumps. The 13GPM Pump requires a minimum of 6.5HP. Please review the specs to make sure your connections will work with this pump, the inlet is a 1/2" NPT. Thanks, Ruggedmade
Question:	It is a npt or bspp thread
Answer:	A positive cable attaches to the bottom of the motor relay on the 5/16 stud. A ground cable attaches to the 5/16 stud sticking out of the motor itself. For the remote the black wire attaches to the motor relay on the small stud that is farthest from the motor (maybe a 10 32 stud). The white wire is your power in (attach it to any power source associated with the motor using an inline fuse). The blue and gray wires are for the two hydraulic solenoids depending on the direction you plum them.

Product features

Apache Fuel Swivel

Fuel dispenser hose swivels provide an effective way to protect your hose from kinking during fueling operations. The swivel is most effective when installed between the fuel dispenser and the fuel hose.

Brand Story

We are Apache, an organization owned and run by hard-working people dedicated to helping you succeed. Partnering with our customers to add value to their bottom line, we are committed to delivering one of the best quality products and service — from custom solutions to product off the shelf — anytime and anywhere they’re needed.

Our job is to keep our customers mission critical to their customers.

Product description

Apache 98108455 3/4" x 12' Farm Fuel Transfer Hose with Static Wire

User questions & answers

Question:	Is the hose ID
Answer:	I don't know where it was manufactured at but I will say this. I haven't had any problems with it.
Question:	How long is it
Answer:	NO !!!!! Propane is under high pressure,this swivel can not handle these pressures.I,m not a tech in this field of work,but I no this much. Take care
Question:	Regarding this 3/4 inch hose; are the male threaded ends 3/4 inch diameter? I need 3/4 inch that would screw into a 3/4" i.d. recepticle pump. Thank you, Phil
Answer:	npt I think. everything screwed right into it without any problem. Just put some pipe dope on and screwed the nozzle right on to it then the hose.
Question:	What do i need to connect this to male threads on a rotary hand pump? https://www.amazon.com/00960-rotary-pump-pipe-thread/dp/b000cn0wto
Answer:	Hello Thanks for reaching out to us about the pump. Use AW32 (SAE 10W) or AW46 (SAE 20W) hydraulic fluid. Do not use “universal” tractor fluid. Thanks, RuggedMade

Product description

Eliminate the unpleasant, manual siphoning process with the battery-operated Siphon pump. This automatic and safe pump allows you to easily transfer water, gasoline, kerosene, diesel fuel, cooking oils, and other light oils with just the Flip of a switch. The battery-operated Siphon will pump 2.6 gallons per minute, and over 1, 000 gallons on a single set of D batteries. Warnings: not drinking water safe. Do not use for consumable liquids, or with thinners, solvents, hot liquids or liquids containing Acetone, Benzene, creosol, ethyl, phenol, methyl ethyl, concentrated caustic soda liquid, nitric acid, hydrochloric acid, and sulfuric acid.

User questions & answers

Question:	Can I use this to empty gas from my lawnmower, snowblower etc
Answer:	We had the same issue The hose with the machine and doesn't fit itWe threads are not metric We had to retread to fit adaptor
Question:	How long is the hose
Answer:	I'm not sure, It is designed for Fuel delivery with a hand crank pump, there's not much pressure. I looked at the construction of this swivel and came to the conclusion that it probably wont handle anything over 15 PSI. I could be wrong, but I would look for a stronger swivel. I hope this helps.

Product description

Designed for fuel applications requiring an auto shut-off. For use with gasoline, 15% ethanol (E85), methanol, and gasoline blends, and diesel fuel. Hold open handle clip for fast, effortless filling. Small, trim, and lightweight with a low profile aluminum body and a full hand insulator that protects the nozzle and vehicle, insulates hand when in use. A minimum of 10 psi (pounds per square inch) is required to operate the auto shut-off. Do not use on gravity flow systems. Product is manufactured in China . This product meets customer requirement.

User questions & answers

Question:	Does it have a warranty
Answer:	approx. 3 feet
Question:	Will this nozzle fit in a car gasoline tank inlet
Answer:	Yes, the hose has a 3/4" pipe thread conection.
Question:	i have 2 600 gallon overhead tank that is full can't get any gas thru nozzle are there parts i can remove to get it to work don't need auto shut off
Answer:	It is 12 feet long as noted in the description (3/4"x12').
Question:	I installed mine yesterday and for some reason I can't get any gasoline to flow out of the nozzle! Any input? What's the rod inside
Answer:	Yes, the hoses I bought screw into the 3/4" in take and outlet on my 3/4" pump that I will use to transfer fuel from one tank to another.

Product description

Apache 98108450 3/4" x 10' Farm Fuel Transfer Hose Male x Male Assembly with Static Wire

User questions & answers

Question:	is this 3/4 id or od
Answer:	Yes it will as well as an aircraft fuel tank.
Question:	I replaced an identical hose with this one on a gravity feed diesel tank. Now getting much slower flow
Answer:	This is a high pressure nozzle as I found out the hard way, it will only operate with a pressure valve located inside the body, to disassemble would be a freakin project, I ended up returning it and just using a gate valve or ball valve connected to a good quality hose.hope this helps. This is the hose which is good quality. http://www.amazon.com/gp/product/B000PDNCWU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	How stiff is this hose at 0 degrees
Answer:	Mine worked fine. Only issue had was with pump, hose and tank. Had to let the tank breathe so it could suck up the gas and my hose was slightly pinched limiting flow as well but the nozzle works perfectly.
Question:	Is this 3/4 male npt? https://www.amazon.com/gp/product/b001ish63w
Answer:	As long as end will fit where you put gas into machine

Product description

User questions & answers

Question:	My gas caddy Hose inside 3/4" , Fitting is 15/16" Fine thread will this work
Answer:	I replaced one on a gravity gas tank, about 2 months and it started leaking at the hose connection. You get what you pay for. I recommend spending the money and buying a commercial grade hose and I believe your problems will go away. Hope this helped.
Question:	Does this have an anti-static wire in it
Answer:	It depends on how much use at the time at 0 degrees. New hose will be stiff and used will be not as stiff.
Question:	I need a hose 23" long no feet do u have or can you make that size
Answer:	The one I bought was 3/4 in. male npt. I expect all are the same.
Question:	can i get this in a two or 3 foot length
Answer:	Not sure I've owned at least 4 of these and if they did have a warranty they have out lived it...

Product description

3/4" Female Pipe Thread, Blue, Auto Shut Off Farm Fuel Nozzle, With 15/16" Spout, 15.852 GPM, For Use With Gasoline, 15 Percent Ethanol, Methanol & Gasoline Blends, & Diesel Fuel, Hold Open Handle Clip For Fast, Effortless Filling, Small, Trim, & Lightweight With A Low Profile Aluminum Body & A Full Hand Insulator That Protects The Vehicle From Scratches & Nicks, & Insulates Hand When In Use, UL Listed, Features A Minimum Of 10 PSI Is Required To Operate The Auto Shut Off, Do Not Use On Gravity Flow Systems.

User questions & answers

Question:	Will this fit in a gas tank on a car and truuk
Answer:	Didn't work well from our gravity tanks. Needs a pressure to operate best.
Question:	Why is the handle blue? blue equals def
Answer:	I never install it. The handle, trigger and spout would not let me retrofit so it was a total los for me.
Question:	Does this work with a hand pump system
Answer:	It fit mine just fine.

Product description

The FR1204H is a 12V 15 GPM fuel transfer pump that comes as a pump only model and comes with a 3/4" elbow, 5’ 12-gauge ground wire, and a 18’ 12 gauge 2-wire battery cable (3/4" outlet). It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20. The previous FR1204G model has been updated to the FR1204H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

• Durable cast iron pump housing built to withstand the wear and tear of rough operating environments
• Removable junction box allows for easier installation
• Thermal overload protection prevents motor from overheating during abnormal usage
• Pump is capable of pumping fluid out of an 8' deep storage tank at sea level
• Rugged switch lever is designed to endure heavy abuse

User questions & answers

Question:	I would like to buy this package but can I get the green handle automatic nozzle instead
Answer:	I don't believe it does. A separate wire to ground can be attached and taped to the outside of the hose if you wish.
Question:	Which Fill-Rite pump is suitable for aviation fuel? (avgas
Answer:	I believe the hoses are pre manufactured to standard lengths.
Question:	can the pump run with the nozzle closed without damaging the pump
Answer:	Make your own home Depot has all the parts.
Question:	Can someone tell me for sure if this particular pump carries the 2 year warranty expressed here
Answer:	The fittings are 3/4 pipe so I guess the i.d of the hose would be close to that

Product features

Rotary Vane

Rotary vane technology is a positive displacement (fixed volume) pump design that utilizes an offset rotor with sliding vanes that rotates on a motor shaft inside the pump. The vanes move outward against the pump cavity to form individual chambers (positive displacement). Fuel enters into the pump cavity through the inlet port on the rotor side where the vanes are fully extended. As the rotor turns, the vanes collapse inward creating the pressure that forces the fuel into the discharge port and through the hose.

Advantages of rotary vane technology…..

• Increased suction lift
• No performance loss due to vane wear
• Self-priming ability
• Easy maintenance
• Consistent performance

Suction Lift

The maximum suction lift rating refers to the maximum vertical distance that a pump can lift fuel out of a tank. On rotary vane pumps, suction lift is created due to the offset of the rotor in the pump cavity, which increases the volume in the chamber between the vanes, thus lowering the pressure on the pump’s inlet. Atmospheric pressure, which is now greater than the inlet pressure in the pump, moves the fuel from the tank to the pump cavity (self-priming).

Suction lift is determined by the pump specifications, the type of fuel, and the altitude of the location where the pump is installed. Higher altitudes reduce the suction lift of a pump due to the reduced atmospheric pressure.

To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve.

Discharge Pressure

Discharge pressure refers to the systems pressure while dispensing. It effects flow-rate based on the pump’s design - the lower the discharge pressure, the higher the flow-rate.

Variables that increase discharge pressure/decrease flow-rate:

• Adding accessories (filters, measuring devices, swivels, etc…)
• Changing accessories (increasing the length or decreasing diameter of hose)
• Dispensing fuel above the pump (the higher the discharge point is above the pump the lower flow-rate)p
• Pumping higher viscosity fluids (Fill-Rite pumps are designed to pump at a viscosity no greater than kerosene)

To lower discharge pressure/increase flow-rate, remove or limit restrictions. Examples include, moving from a 10 micron filter to 30 micron filter, changing from a 800 series to a 900 series or TT10 series, limiting the use of elbows in system design, or increasing the diameter of your discharge hose/pipe.

KIT120RKG

Primary pump repair kit for 1200 series pumps.

KIT120ARM

Motor repair kit for 1200 series pumps.

KIT120BD

Bio-diesel conversion kit for 1200 series pumps.

KIT120NB

Nozzle boot kit for 1200 series pumps.

NX25 Series Fuel Transfer Pump

Nextec Intelligence is an exclusive array of design advancements, technologies and user functionalities that take pump performance to unprecedented levels. Intelligent Tones inform when attention is needed. A variable speed motor automatically adjusts for peak performance with improved suction lift. More compact, lighter, and less amp draw—it sets a new standard for efficiency.

Simple features, such as the lower pump weight, makes this pump great for mobile applications or on the less sturdy aluminum fuel tanks. Other convenient features, like a removable power cord or an auto power down function (after 20 minutes of inactivity), are benefits other pumps just don't offer. Whether the application is 12V, 24V, 115V, or 230V this premium offering from Fill-Rite consistently gets the job done.

With Nextec, the future of fuel transfer is here.