12 best exhaust tips

• Fits: To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch
• Pack of 2 blue exhaust tips; Professional installation is highly recommended; No instruction included
• Weld On installation and Single Layer-Slant Cut design
• Materials: Vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
• There is 1 year warranty for each purchase. Before to buy, please make sure the Brand Logo "Upower".

User questions & answers

Question:	Will this fit my 2019 ford ranger 4x
Answer:	The exhaust tip can fit all cars ,the only difference is the size The tip inlet size is matched the outlet size of your pipe on your car , so it would be better for you to measure your pipe outlet size This item can fit car with 2.5" outlet of your pipe ; If your pipe outlet size is smaller or bigger than it, you can just tell us which size is the correct one so that we can help you find the correct one as exchange
Question:	Will this work on a 2inch
Answer:	It can make your sound louder and fatanstic
Question:	Will this fit my 12 grand cherokee
Answer:	5 to 6 mi
Question:	Does it alter the sound
Answer:	Good

Product features

How to Install the exhaust Tip?

• ID: 2.5" OD: 4" Length: 18" Angled Chrome
• Weld On installation and Angled Cut design
• Materials: Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty.
• Fits: To ensure proper fit make sure your exhaust INLET diameter is 2.5 (2 1/2) Inch
• Pack of 2 ; Professional installation is highly recommended; No instruction included

User questions & answers

Question:	Next question is if purchase same 2 tips individually isn't that the same weight? And it why does cost more also
Answer:	This item is Weld-On
Question:	Are these chrome plated or fully stainless steel
Answer:	Yes, it is 2pcs
Question:	Can we clamp these on
Answer:	No it will not the exhaust is slightly larger than 4x4
Question:	Are there two tips
Answer:	No, it can only work with 2.5

Product features

How to Install the exhaust Tip?

Product description

jeep wrangler accessories car cover ford f exhaust tip ram wrap chevy cruze nissan sentra valve stem jk tips flowmaster super magnaflow muffler series fj cruiser mitsubishi lancer corvette silverado focus st pipe cherry bomb fart borla audi a cool lexus is extreme mazda cummins sticker toyota tacoma - bmw e vw parts tail light gas pedal i infiniti q hyundai veloster grill caps trd dodge dart system chrome cleaner tape wrx range rover race outlander decal subaru diesel impala g coupe potato sack black drone led lights for motorcycles outlaw runner jetta sounds thrush spoiler bullet weights stickers video expander mk gti dual avenger accent outlet honda fit turbo whistle fiesta dope carven truck robot cat motorcycle bombs y dakota glass pack impreza steel sacks stainless glasspack flow master fmf wratchet wrench set mini z x eclipse inch tundra mbrp fiber clamp versa robots adults pitch per inlet land f- glasses genesis juke civic si straight altima does it acura integra ppe kit akrapovic buck hell hou cap band gmc long decals and magni cadillac desert cutter rv tire duramax sale by owner sign bike throttle different world complete charger silencer universal trim back rbp sinister xr hellcat kits to build mustang gt match the percent happier blue ex ranger metal mulisha catback rav headers rogue hanger rx atv mufflers delete tlx magnum hatchback high performance flex discovery bender trucks weld miata prado ticket ride usa scat sierra simple vibrant resonator dynomax frs sport edge packing fake clamps infinity accord widow excursion adapter stack m flexible marine pure blocks cherrybomb simulator supper challengers call van life my first on hooks frontier lift polishing tube signs vehicles giant killer custom pipes angry music mercedes generator evo single chamber louder with crowder dc sports volkswagen quiet pedals slim hks avengers magna in n quad cars fix walker extension r camo power distribution block automotive sedan loud simulador de products mellow used under smile hangers rt muscle compass gibson aftermarket auto body im only one away escape scion tc check benz tires chemical guys gallon protege socket bolt push not river no titan sound weight phones rich kid jazz ecoboost u racing stratus megan red escapes para carros perforated tiburon aero turbine star camaro packs stems replacement corsa top rated drones mofles adjustable mx tool accesorios carro free gli sacs challenger dirt out turn down platinum fx racer multi cut lisle tiny house container home modification vortex taillights noise reducer neo tailpipe welded selection color mi installation orange repair jdm mufler gallery charles koch gear rake spec d carbon factory engine racers oil silenciador downpipe american awards beautiful constraint catalytic converter diamond eye diy stacks snake covers burnt rain resonated can small tubo header ultra round stitch pjs women care diameter chambered through exuast seat flapper dbx magnapack booster flowfx apexi scatpack flowmasters saver curved ricer slip ehaust pro resonadores angled titanium tuner real bullets axle tahoe unlimited forester punta inside crome rolling big bumper all travel hushpower link hs blow off tractor cc front lip hk lips exhust cheap matte curve piping colorado bottle exaust hummer h amazing baking dsycar style crown victoria silver welding dyno max autosaver zero emissions lx piezas lada tank panties deep tone b product tj dynamax side skirts resonating fiberglass weather xx resonators open matt book paris wife wimpy old carhartt fr coats

• Resonated to enhance sound
• Easy install, bolts on in minutes
• Polished silver finish
• Easy install, bolts on in minutes
• Adds visual appeal. Fits- 1.75-2.5 inch Piping

User questions & answers

Question:	Would this fit a 2010 Mazda3 2.5l sedan
Answer:	There is one to fit your vehicle, most likely. You need the year make model and engine size. That will determine the size tip you need to order. Good luck!
Question:	Will this fit my 2009 Nissan Versa
Answer:	This exhaust tip has a bolt-on application that will fit on tail pipes that are 1.5" - 2.5" in diameter. To verify fitment simply measure the overall diameter of the vehicles tail pipe. Thank you!
Question:	Will this fit my 2018 subaru WRX
Answer:	The freight for 2 parcels is higher than pack them in one parcel. Because it has the cost of the first weight for each parcel.
Question:	Will this fit on a 3”inlet tailpipe
Answer:	It is Stainless Steel

• 【Dimension】2.5 inch inlet diameter;3.5 inch outlet diameter;Overall Length:9.5 inch.
• 【Design】Weld On - Double Wall Slant Angle Cut - Rolled Edge
• 【Material】High Quality THREE times Mirror Polished T304 Stainless steel. Durable and Anti-corrosive,never Rusty.
• 【Wide Application】Universal fits 2.5" Inlet trucks car exhaust tail pipe muffler tips.
• 【1 Year Warranty】No instruction is included. Professional installation is highly recommended.

User questions & answers

Question:	This is fit to chevy cavalier
Answer:	The exhaust tip can fit all cars ,the only difference is the size The tip inlet size is matched the outlet size of your pipe on your car , so it would be better for you to measure your pipe outlet size This item can fit car with 2.5" outlet of your pipe ; If your pipe outlet size is smaller or bigger than it, you can just tell us which size is the correct one so that we can help you find the correct one as exchange
Question:	Will this fit a 2013 bmw 550i
Answer:	About 7 1/4”
Question:	Will this fit a 2019 honda accord 2.0t sport
Answer:	MY BONNEVILLE HAS A O.D. OF 2 1/2 " AND IT FITS.
Question:	What is the full width from exit pipe edge to the other pipe edge...(i have trim it has to fit between
Answer:	Yes

Product features

How to Install the exhaust Tip?

• Fits: To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch
• Pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included
• Weld On installation and Double Wall Slant design
• Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
• There is 1 year warranty for each purchase. Before to buy, please make sure the Brand Logo "Upower".

User questions & answers

Question:	Do you have bigger outlet
Answer:	yes, it has Upower on it, it is our brand name
Question:	Do you have tips for 2" OD pipe
Answer:	Yes 2007 to 2010
Question:	Does this have the name Upower on it
Answer:	It's universal. It can weld onto anything as long as it has the space to fit. If your car has a cutout in the bumper for the tailpipe, measure to make sure it's wide enough. If not, just weld it to the tailpipe or muffler and angle it out under the bumper.
Question:	Will these fit on a 2008 ford edge
Answer:	Our size is the 2.5 Inch Inlet 3.5" outlet 9.5" , you can compare our size with your old one.

Product features

How to Install the exhaust Tip?

• The exhaust tip can fit all cars, but the only matter is that your car should be 2.5 inch outlet piping ( or less) , and professional welder is suggested
• Pack of 2 dual blue exhaust tips; Professional installation is highly recommended; No instruction included
• Weld On installation and Single Layer-Straight Cut-Y Pipe design
• Materials: Vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
• There is 1 year warranty for each purchase. Before to buy, please make sure the Brand Logo "Upower".

User questions & answers

Question:	How hard is it to install myself
Answer:	I don’t know, if you have a 2.5” pipe it will, look it up on google what size pipe the GTI’s have. These have a 2.5” inlet and a 3.5” output. They need to be welded on also.
Question:	Can I get these welded on
Answer:	The exhaust tip can fit all cars ,the only difference is the size The tip inlet size is matched the outlet size of your pipe on your car , so it would be better for you to measure your pipe outlet size This item can fit car with 2.5" outlet of your pipe ; If your pipe outlet size is smaller or bigger than it, you can just tell us which size is the correct one so that we can help you find the correct one as exchange
Question:	Does this fit a GTI
Answer:	Sorry we do not have it
Question:	Will this fit my 2001 Acura cl type s
Answer:	Dear customer, Sorry ,we do not have 2" OD available now

Product features

How to Install the exhaust Tip?

• 【Dimension】2.5 inch inlet diameter;3.5 inch outlet diameter;Overall Length: 9.75 inch. ( Fit all cars that tailpipe outlet diamater is 2 1/2 inch)
• 【Material】Mirror Polished T304 Stainless steel.High Quality Burnt blue.Durable and Anti-corrosive,never Rusty.
• 【Design】Weld On installation and Angled Cut - Rolled Edge
• 【Wide Application】Universal fits 2.5" Inlet trucks pickup car exhaust tailpipe system
• 【1 Year Warranty】No instruction is included. Professional installation is highly recommended.

User questions & answers

Question:	Is this a single application or dual for 35? Do I have to put 2 in the quanity box when ordering
Answer:	If it clears the outlet size and has the same pipe as the inlet it should be fine
Question:	Would the color wash off of power washed
Answer:	The exhaust tip can fit all cars ,the only difference is the size The tip inlet size is matched the outlet size of your pipe on your car , so it would be better for you to measure your pipe outlet size This item can fit car with 2.5" outlet of your pipe ; If your pipe outlet size is smaller or bigger than it, you can just tell us which size is the correct one so that we can help you find the correct one as exchange
Question:	Fit a 2012 Ford fiesta
Answer:	With this kind of thing, if you’re asking that question then you’re going to need a professional to do it.
Question:	Can this fit a 2014 Chevrolet Camaro rs
Answer:	Yes you can i got them welded on my car

Product features

How to Install the exhaust Tip?

• Standard 2.5’’ inlet, 2.5’’ dual outlet, 9.8’’ overall length.
• Made from durable, anti-corrosive stainless steel. Smoothly filters out emitted gas from the vehicle engine.
• Simple, secure installation with welding required.
• Note: Please measure the outlet diameter of your exhaust pipe prior to purchasing.
• 24-Month Warranty: We provide a 24-month warranty for this exhaust pipe.

User questions & answers

Question:	Can this y pipe be used as dual in and single out
Answer:	I think I’ll work for you... you mite have to get it welded together for a good fit.
Question:	I have a 98 chevy silverado and was wondering if I can use this to connect the two pipes from the cats and make them one pipe
Answer:	Yes
Question:	I have a flowmaster super 10 dual in 2.5”, can fit this y to connect a single out catalytic converter single out to the Flowmaster super
Answer:	Yes this is sold individually, so yes you must order 2 seperate tips
Question:	Are all the inlets and outlets 2.5 OD pipe
Answer:	No it doesn’t wash off, it will discolor alittle over time with the heat cycles but it mine still looks about 95% as it did when I bought it, going on 2 years now and 40,000 miles.

Product features

Specification:

• Inlet Size: 2.5 Inch Inside Diameter
• Outlet Size: 2.5 Inch Inside Diameter
• Length: 9.8 Inch Overall Length
• Material: 409 Stainless Steel
• Package: 1 Piece Y-Pipe.

Step 1: Clean the surface of your tailpipe.

• Clean the dirt and sand on your tailpipe with penetrating oil and a shop rag.
• (Make sure your tailpipe is at room temperature, and do not clean the surface of the tailpipe after the car just went out)

Step 2: Slide the exhaust tip into your tailpipe.

• Try to slide the exhaust tip into the tailpipe. You may encounter some resistance, so, if necessary, use automotive grease to lubricate the pieces if necessary.
• Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.

Step 3: Weld the exhaust tip.

• Weld around the joints between the edges of the tailpipe and the exhaust tip. Welding is required for secure installation.
• THEN, THE INSTALLATION IS COMPLETE.

• Please measure your own pipe and bumper cutout, and compare to this product fitment size.
• This exhaust tips fit pipes measuring between 1.75 and 2.5 inches in diameter.
• Size : / Length 6 '' / width 3'' / Inlet Diameter 2 3/4 '' / Outlet Diameter 3''
• This muffler tips are made by high quality stainless steel and won’t change the sound or function of your car.
• Clamp-on and bolt-on installation : They are attached to the tailpipe by clamps or screws (Included).

User questions & answers

Question:	I have a 2008 dodge ram 1500 quad cab the tailpipe is approximately 3" radius that would make it a 6" circumfrence can this fit? Or what size do i nee
Answer:	don't know about the Altima, but the tip fits around the stock exhaust(s) in the diameters specified... three clamps tighten around the stock pipe. so far, so good... definitely better looking than the rusty stock pipe it hides.
Question:	I have a 2.5" od pipe. is there enough gap that it will fit over this easily? is the entire length the same diameter
Answer:	Your tail pipe outside diameter has to be between 1.5" and 2.5" so that it will fit inside the this part you're considering buying. There are 3 ajustment bolts that will tighten the part to your Jeeps tail pipe. Fast and easy and looks very nice.
Question:	I have the base model 2013 Altima with just the black tail pipes, I was wondering if these would fit it? And be able go directly over the stock ones
Answer:	Yes, it is designed to work either direction.
Question:	Will this fit Jeep Wrangler
Answer:	Yes should work just fine with adaptors stock 98 Chevy pipe is 2 1/4 this is 2 1/2

Product features

Essential Drain Hole

Universal Bolt-on Design

Elegant Rolled Edge

• 💠 SIZE: 2.5 inch inlet, 3.5 inch outlet, 18 inch overall lehgth,100% Brand New Exhaust Tip.
• 💠 MATERIAL: Made by high quality stainless steel, polish stainless surface, light weight, durable and heat-resisting, anti-corrosion and degant appearance.
• 💠 INSTALLATION STYLE: Weld on design, Single Layer, Angled Cut 45 Degree, Rolled Edge.
• 💠 FUNCTION: Exhaust Waste Gas,Reduce Pressure and Noise, Filter the waste gas to reduce pollution.
• 💠 IMPORTANT NOTE: Installation instruction is not included, professional help in installation may be needed.

User questions & answers

Question:	Is it black paint on stainless steel
Answer:	I had to use a tailpipe expander to get them to fit over a 2.5” pipe may have just been a factory defect
Question:	Will these start to get pitted and rust shortly after installation
Answer:	No
Question:	Will these fit over 2.5 inch exhaust pipes
Answer:	From the product description:: Measure the tail pipe diameter on your car before ordering. This exhaust tips fit pipes measuring between 1.5 and 2.5 inches in diameter. The tip itself measures 6 inches in length and 3 inches in width.
Question:	Is there a resonator inside or just pipe
Answer:	i also have a 2.5" pipe and had to remove one of the clasps to make it fit. The opening is larger than the connecting end. The max connecting end is 2.5" which does not fit a 2.5" pipe.

Product features

Fitment:

• Size:2.5"x3.5"x18" Angle Cut 45 degree
• Color:Silver
• Installation:Weld On

Universal For 2.5" Inside Diameter Exhaust Tip

Specification:

• Inlet Diameter: 2.5 Inch
• Outlet Diameter: 3.5 Inch
• Overall Length: 18 Inch
• Style: 45 Degree Single Angled Cut - Rolled Edge Design; Weld On

Feature:

• Material: High quality Stainless Steel. Polish Stainless Surface.
• Feature: Durable and Corrosion and Water Resistant; Exquisite workmanship
• Package Included: 1 piece Exhaust Tip

How to Install an Exhaust Tip

• Step 1: Cleaning the Tailpipe:

Clean off the tailpipe and exhaust tip with penetrating oil and a shop rag.

• Step 2: Sliding the Tip On

Try to slide the tip onto the exhaust pipe. You will probably meet some resistance, so use automotive grease to lubricate the pieces if necessary. Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.

• Step 3: Fastening the Tip

Finish the installation according to the specific fastener style you chose. With some models, you will tighten screws and clamps to secure the exhaust tips. For other models, you will weld a joint between the edges of the tailpipe and the exhaust tip.

• 2.5" ID EXHAUST TIP - 2.5" inlet diameter 4" outlet diameter 12" overall length, universal fits 2.5" outer diameter tailpipe.
• MATERIAL - Made of stainless steel to protect the existing tailpipe from corrosion and deformation.
• APPEARANCE - Repeatedly polished surfaces are less prone to soiling. The pure and elegant silver exterior can perfectly decorate your vehicle.
• BOLT ON INSTALLATION - No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench.
• UNIQUE DESIGN - Bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust.

User questions & answers

Question:	The sound change? To a aggressive sound
Answer:	I put it in my f150 and didn’t notice anything really. Sorry.
Question:	Do you have 2.75x4x
Answer:	This exhaust tip is universally fit for 2 1/2" OD tailpipe. Before purchasing, please measure the outer diameter of your vehicle's tail pipe. From A-KARCK
Question:	Will this make my exhaust a little louder that’s what I want without the cost of dual exhaust
Answer:	I think so, good quality paint hasn’t chipped yet. We drive on a lot of gravel roads and rough areas, they have held up. I guess I won’t know until they chip
Question:	Does this fit my 2014 Toyota tundra
Answer:	I ordered a black and don’t see any rust etc. thanks

Product features

A-KARCK Polished Exhaust Tip

• High quality stainless steel infused with anti-corrosive agents that prevent your tailpipe from rusting.
• Rolled edge angle cut, drainage hole, not easy to accumulate water and prevent rust.
• The repeatedly polished appearance perfectly decorates your vehicle.
• Note: Only Fits 2.5 Inch Outside Tailpipe. Please check the size of your vehicle’s tailpipe before purchasing.

Product description

jeep wrangler accessories car cover ford f exhaust tip ram wrap chevy cruze nissan sentra valve stem jk tips flowmaster super magnaflow muffler series fj cruiser mitsubishi lancer corvette silverado focus st pipe cherry bomb fart borla audi a cool lexus is extreme mazda cummins sticker toyota tacoma - bmw e vw parts tail light gas pedal i infiniti q hyundai veloster grill caps trd dodge dart system chrome cleaner tape wrx range rover race outlander decal subaru diesel impala g coupe potato sack black drone led lights for motorcycles outlaw runner jetta sounds thrush spoiler bullet weights stickers video expander mk gti dual avenger accent outlet honda fit turbo whistle fiesta dope carven truck robot cat motorcycle bombs y dakota glass pack impreza steel sacks stainless glasspack flow master fmf wratchet wrench set mini z x eclipse inch tundra mbrp fiber clamp versa robots adults pitch per inlet land f- glasses genesis juke civic si straight altima does it acura integra ppe kit akrapovic buck hell hou cap band gmc long decals and magni cadillac desert cutter rv tire duramax sale by owner sign bike throttle different world complete charger silencer universal trim back rbp sinister xr hellcat kits to build mustang gt match the percent happier blue ex ranger metal mulisha catback rav headers rogue hanger rx atv mufflers delete tlx magnum hatchback high performance flex discovery bender trucks weld miata prado ticket ride usa scat sierra simple vibrant resonator dynomax frs sport edge packing fake clamps infinity accord widow excursion adapter stack m flexible marine pure blocks cherrybomb simulator supper challengers call van life my first on hooks frontier lift polishing tube signs vehicles giant killer custom pipes angry music mercedes generator evo single chamber louder with crowder dc sports volkswagen quiet pedals slim hks avengers magna in n quad cars fix walker extension r camo power distribution block automotive sedan loud simulador de products mellow used under smile hangers rt muscle compass gibson aftermarket auto body im only one away escape scion tc check benz tires chemical guys gallon protege socket bolt push not river no titan sound weight phones rich kid jazz ecoboost u racing stratus megan red escapes para carros perforated tiburon aero turbine star camaro packs stems replacement corsa top rated drones mofles adjustable mx tool accesorios carro free gli sacs challenger dirt out turn down platinum fx racer multi cut lisle tiny house container home modification vortex taillights noise reducer neo tailpipe welded selection color mi installation orange repair jdm mufler gallery charles koch gear rake spec d carbon factory engine racers oil silenciador downpipe american awards beautiful constraint catalytic converter diamond eye diy stacks snake covers burnt rain resonated can small tubo header ultra round stitch pjs women care diameter chambered through exuast seat flapper dbx magnapack booster flowfx apexi scatpack flowmasters saver curved ricer slip ehaust pro resonadores angled titanium tuner real bullets axle tahoe unlimited forester punta inside crome rolling big bumper all travel hushpower link hs blow off tractor cc front lip hk lips exhust cheap matte curve piping colorado bottle exaust hummer h amazing baking dsycar style crown victoria silver welding dyno max autosaver zero emissions lx piezas lada tank panties deep tone b product tj dynamax side skirts resonating fiberglass weather xx resonators open matt book paris wife wimpy old carhartt fr coats

• Product Dimensions: 2-1/4in inlet x 3-3/4in outlet x 9in long
• Slanted Tip Shape
• Resonated tips are to enhance sound output
• 100 percent stainless steel with Flat Black Finish
• Fits 1.5” to 2” Diameter Piping
• Affordable Performance: the exhaust tip is designed to boost the intensity of the exhaust notes. It helps to create a more aggressive sound while adding a sporty look to your vehicle
• Design: the multiple point clamp-on exhaust is made using T304 stainless steel that resists corrosion. The exhaust tip is TIG-welded by hand. It has a straight-through design for top power output. It has a 3-bolt clamp system for easy installation

User questions & answers

Question:	will this fit a 2001 monte carlo SS
Answer:	As long as the O/D of your exhaust pipe is smaller the 2 1/2
Question:	Le queda al infiniti jx
Answer:	No. My pipes on my charger are 2 1/4 and I had to bend in the edge of the pipe just a little to slide it on. You will need it in 2.5. IF you run into a problem and they are to big then simply find a muffler shop to weld them on. It's better that way anyway. It wouldn't cost you any more than 100 at most to do that
Question:	Will it fit my Toyota 4runner SR
Answer:	No. It is only an exhaust tip
Question:	Will this fit a '07 FJ Cruiser with 2.5 end pipe
Answer:	Yes