10 best ls
In the context of Engine Mounts, "LS" typically refers to the LS engine, a popular series of V8 engines produced by General Motors (GM) under the Chevrolet brand. The LS engine family has gained significant popularity in the automotive aftermarket and hot-rodding communities for several reasons:
Performance: LS engines are known for their impressive power output and performance capabilities. They come in various sizes and power levels, making them suitable for a wide range of applications.
Reliability: LS engines are often praised for their durability and reliability. They are built with modern engineering and materials, which contribute to their longevity and consistent performance.
Modifiability: LS engines are highly modifiable, making them a favorite among car enthusiasts. Aftermarket parts and upgrades are readily available, allowing individuals to customize and boost the engine's performance to their liking.
Versatility: LS engines can be used in a variety of vehicle types, including muscle cars, trucks, and even some sports cars.Their versatility and compatibility with different transmissions and drivetrains make them a popular choice for engine swaps.
Fuel Efficiency: Despite their powerful performance, LS engines are known for their relatively good fuel efficiency, especially when compared to older V8 engines.
Availability: LS engines are widely available, and their popularity means that both new and used engines can be easily sourced from salvage yards or suppliers specializing in engine swaps.
Simplicity: The LS engine's design is relatively straightforward, which can make installation and maintenance more accessible for DIY mechanics.
Aftermarket Support: The LS engine has a vast aftermarket support network, including various performance parts, engine management systems, and accessories, allowing for extensive customization.
When it comes to engine mounts, it's important to choose mounts that are compatible with the specific LS engine variant and the vehicle it will be installed in. Proper engine mounting is crucial for ensuring the engine's stability and preventing excessive vibrations and movement.
Overall, the LS engine has become an iconic choice for those looking to upgrade or replace the engine in their vehicles due to its combination of performance, reliability, and aftermarket support.
Below you can find our editor's choice of the best ls on the market
ICT Billet SBC Vehicle to LS Engine - Motor Mount Adapter Plate - Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet 551628
ICT Billet
- Made with OEM specifications for the best possible fitment into your vehicle
- These plates will move the crankshaft centerline up .17" in the vehicle
- Made in Wichita, Kansas from aerospace grade, USA produced, 3/8" billet aluminum
- Includes: 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts (plates are M10 threaded, use the hardware included)
- Natural aluminum finish
User questions & answers
| Question: | What hp are these rated for? i’m looking for mounts to use in my 78 malibu for a turbo ls swap probably around 1000 rwhp |
| Answer: | I would probably use solid mounts on your application, the adapters are made well but if fasteners came loose might rip out of adapter bracket. I dont know if ICT billet offers solid mounts for LS swaps, but dirty dingo does, they are here on amazon also. |
| Question: | Anyone have any luck with these and a stock truck pan/acc, and stock 200r4 in b-body wagon |
| Answer: | If you are mounting anywhere near the stock location the pan will be very low, the truck oil pans are gigantic. I switched to an F body pan and pickup, worth every penny. |
| Question: | On a 1971 Nova with 350 trans, can these mounts leave the trans in stock location so the trans is bolted in stock place on transmission crossmember |
| Answer: | Hello, We try to keep the engine as close to factory location as possible, unforunately exactly in same position is impossible. There are 4 positions for maximum adjustment of engine (from .100" forward of OEM bellhousing position [due to bolt interference, OEM location is not possible for any brand of flat style swap plates] ~forward most position shown in photos~, Secondary positions are: .600", 1.86", and 2.36" engine moved forward) Thanks, Chris |
| Question: | I want to put this on LS3 6.2 with 6 speed automatic from 2014 caprice ss. will this fit on my 6.2 it also has low mounted a/c unit |
| Answer: | These will work with the engine however they do allow for factory mounted a/c as they will interfere. |
Product features
ICT Billet SBC Vehicle to LS Engine - Motor Mount Adapter Plate - Universal Swap Bracket Small Block LS Conversion Adjustable
These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine with your existing mounts
Premium Materials
We only use premium grade, USA produced materials for our parts. We engineer all our parts in the USA, then use USA made equipment to produce them.
Exceptional Quality
We make swapping an engine into your vehicle affordable by utilizing the most efficient manufacturing technologies in our facility. Having great cost does not mean that you must sacrifice quality. Buy from us to support the most complete USA made products on the market.
Research and Development
At ICT Billet, we utilize the latest in technology to ensure each product fits the first time. We laser scan each vehicle, then produce a solid model to test fit our products to have a perfect fit every time.
American Made
Our goal is to use as many USA-made components as possible to keep our jobs in America. We use US-made materials, belt tensioners, metric flange bolts, pulleys and many other components that are manufactured in the USA for reliability.
Complete LS Swap Shop
We offer a full line of LS swap components from engine mounts to wiring.
SEMA Strong
As a SEMA member we take pride in being part of an elite group of automotive manufacturers. We provide the highest level of quality and development into our products.
ICT Billet LS Gen III (3) VALLEY PAN Cover Plate Billet Aluminum Low Profile (No Knock Sensor) LSX LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 Dress Up Engine Cover 551629
ICT Billet
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Dress up your engine with this great looking low profile valley pan
- Compatible With All Gen III Engine Blocks
- Includes stainless steel bolts as shown
- Use with gasket part # MS19328 or 12558178
User questions & answers
| Question: | What exactly does this do to my 5.3 engine |
| Answer: | It’s for if you delete knock sensors. |
| Question: | Will this fit a 2002 camaro Z |
| Answer: | Yes, this will fit ANY gen 3 ls engine. |
| Question: | I received my package but the package was opened and missing 4 blots. Am I able to purchase just the bolts |
| Answer: | Call ict direct, they will hook you up with replacements |
| Question: | What about the obd code if you delete knock sensors |
| Answer: | Hello, You would have to tune out for the knock sensors. Thanks! Sean |
Product features
ICT Billet LS Gen III (3) VALLEY PAN Cover Plate Billet Aluminum Low Profile (No Knock Sensor) LSX LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33
Does NOT include the gasket (Use gasket part # MS19328 or 12558178)
- Dress up your engine with this great looking low profile valley pan
- Use with gasket part #MS19328 or #12558178
*Knock sensors are not required to run the engine
Premium Materials
We only use premium grade, USA produced materials for our parts. We engineer all our parts in the USA, then use USA made equipment to produce them.
Exceptional Quality
We make swapping an engine into your vehicle affordable by utilizing the most efficient manufacturing technologies in our facility. Having great cost does not mean that you must sacrifice quality. Buy from us to support the most complete USA made products on the market.
Research and Development
At ICT Billet, we utilize the latest in technology to ensure each product fits the first time. We laser scan each vehicle, then produce a solid model to test fit our products to have a perfect fit every time.
American Made
Our goal is to use as many USA-made components as possible to keep our jobs in America. We use US-made materials, belt tensioners, metric flange bolts, pulleys and many other components that are manufactured in the USA for reliability.
Complete LS Swap Shop
We offer a full line of LS swap components from engine mounts to wiring.
SEMA Strong
As a SEMA member we take pride in being part of an elite group of automotive manufacturers. We provide the highest level of quality and development into our products.
MR HELLO LS Valve Spring Compressor Tool Compatible for Chevy LSX LS1 LS2 LS3 LS6 4.8 5.3 5.7 6.0 6.2 Engine
Product description
Compatible For:
Works on Any LS engines for Chevy,Silverado,Camaro,GTO,Trans am,Corvette,CTSV,Sierra,Tahoe,Suburban,G8,GM Trucks
Fit for Chevrolet LS1 LS2 LS3 LS6 LSX
LS Valve Spring Compressor Tool is for 4.8, 5.3, 5.7, 6.0, 6.2L LS Engines.
OE:67605
Brand:MR HELLO
Package Included:
One set of Valve Spring Compressor Tool.
（Note: Springs are not included in the product.）
Trustworthy:LS Valve Spring Tool After many tests before leaving the factory, the product is more suitable,the compressor tool has strong durability!
High Standard Quality:LS Compressor Tool Made of stronger steel plates and hardware Strength is better than what you can buy at the market.
Easy Installation:When you installing screws, using lubricating oil can have a better effect,Be sure to maintain the air pressure within the cylinder!And Always use Eye protection and gloves!
24 hours support:If you have any questions, please contact us at any time, we have a professional technical team, will answer the first time after receiving your information
- Compatible For:Valve Spring Compressor Tool fit LS1 LS2 LS3 LS6 Chevy Chevrolet LSX,4.8 5.3 5.7 6.0 6.2L
- Trustworthy:LS Valve Spring Tool After many tests before leaving the factory, the product is more suitable,the compressor tool has strong durability!
- High Standard Quality:LS Compressor Tool Made of stronger steel plates and hardware Strength is better than what you can buy at the market.
- Easy Installation:When you installing screws, using lubricating oil can have a better effect,Be sure to maintain the air pressure within the cylinder!And Always use Eye protection and gloves!
- 24 hours support:If you have any questions, please contact us at any time, we have a professional technical team, will answer the first time after receiving your information
Valve Spring Installation Tool,Professional LS Valve Spring Compressor Tool For LS2 LS1 Style Valve Spring Installation (Red)
KIMISS
Product description
Characteristic:
1. This valve spring can be easily installed by a wrench.
2. This LS1/LS2 kit works for both the intake and exhaust valves of La Cathedral port cylinder heads.
3. Easy to remove and install, which saves time and effort.
4. This installation tool not only makes the spring installation easier, but also has less pressure on the casting.
5. Simply bolt the tool down, insert the square drive of a standard switch bar or socket wrench into the left or right side of the tool, and pry down to compress the spring.
Specification:
Condition: 100% brand new
Item Type: LS valve spring compressor tool
Material: Aluminum alloy
Optional Color: Blue, black
Fitment: Fit for intake and exhaust valves of La Cathedral port cylinder heads
Package List:
1 x Valvespring Compressor and Installation Tool(With 2 Installation Screws)
- ❤【USEFUL TOOL】This valve spring can be easily installed by a wrench, more convenient. The valve spring compressor tool has exquisite workmanship, simple and elegant design, will not affect the performance of the car.
- ❤【SUITABLE FOR】This LS1/LS2 valve compressor tool kit works for both the intake and exhaust valves of La Cathedral port cylinder heads.With reliability and durability, long service life, and reduce the cost of replacement.
- ❤【EASY TO INSTALLATION】The installation tool has less pressure on the casting, convenient for intallation.Easy to remove and install valve spring , saving time and effort.This will be one of the best options for you to modify your own car.
- ❤【CONVENIENT TO USE】Simply screw the tool in place of the rocker arm, insert the square drive of a standard switch bar or socket wrench into the left or right side of the tool, and pry down to compress the spring.
- ❤【GOOD PERFORMANCE】Establish strict quality control standards, 100% testing has been carried out before leaving the factory. Professional manufacturing, high reliability, 100% novelty and high quality.
3mirrors 67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks
- Bolts and nuts Kit built from 3/8" Steel and cnc machined for a great fit and Durability. Performance levels are 10.9, 10.9 and 12.9, much better than the other 8.8.
- Precision CNC Machined, This Valve Spring Compressor Kit is a great helper to remove old stock valve springs and installed new valve springs.
- This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!
- OE 67605, It will work on any LS engine for Firebird, for Silverado, for Camaro, for GTO, for Trans am, for Corvette, for CTSV, for Sierra, for Tahoe, for Suburban, for Pontiac G8 GT and more.
- *Springs are not included in the product. Read the instructions included in the package first. Tips: Adding lubricant will work more perfect. It is not recommended to buy cheaper alternatives, which will not last long. Thanks!
User questions & answers
| Question: | Wold this work on LT1 as well |
| Answer: | Used on my 5.3 Chevy. |
| Question: | Is it made in USA |
| Answer: | Don't know where it's made but only tool I could find that worked after buying two others. |
| Question: | will this work on a 2001 gmc youkan denali?? thanks |
| Answer: | It's not fit. |
| Question: | Will this work on 1994 s10 v6 TBI |
| Answer: | no it will not. |
Product features
Proper installation is the first step in the Remove valve springs process
When installing, if there is an error on the left, you need to turn the T-shaped piece block before using it.
Performance levels are 12.9 and 10.9, much better than the other 8.8.
A full kit & one more Bolt.
Comp Cams 528-KIT Spring Seat and Seal Kit for GM 5.3/6.0L LS
Comp Cams
Product description
Designed to work with our LS6+ Beehive Valve Springs, this spring seat and seal kit includes 8 seats/seals for the intake valves and 8 seats/seals for the exhaust valves.
- All-In-One Solution - COMP Cams Spring Seat and Seal kit offers a convenient kit for replacing the seats and seals on your GM LS engine.
- Beehive Ready - The 528-KIT Spring Seat and Seal Kit is ready to accept the GM LS6 and COMP Cams LS6+ Beehive Valve Springs.
- Quality Components - The 528-Kit Seat and Seal Kit is made of quality components that ensures durability and dependable sealing capabilities.
- Fits 5. 3 and 6. 0L LS
- Made in USA
- Fit type: Vehicle Specific
User questions & answers
| Question: | Will these work with dual springs |
| Answer: | No, these will not work with dual springs. |
| Question: | Will these work on a 02 silverado with 706 heads |
| Answer: | Yes, these are the proper seals. Fit my 706’s just fine |
| Question: | Will these ls6 spring seat and seal kit work on my ls1 2000' silverado 2500 6.0 lt as an upgrade kit |
| Answer: | These will fit any LS head with stock springs. |
| Question: | Which one is exhaust and which is intake |
| Answer: | The intakes would be blue and the exhaust are brown. |
Dewhel LS Engine Starter Bolt Kit Long LSX LS1 for Camaro Corvette 4.8L 5.3L 6.0L 6.2L GM
DEWHEL
Product description
Starter Bolt Kit
2x Long Bolts, 1x Short Bolt
Fits factory style starters that require2 long bolts or 1 long and 1 short.
Grade 10.9
- Fits all two bolt pattern LS starters
- Zinc Coated
- Grade 10.9 Alloy Steel
- In package: 2x Long Bolts, 1x Short Bolt
- One set of 3 Starter Bolts for GM LS series engines
Engine Flywheel Holding Locking Tool for LS 1 2 3 LSX
Product description
Specifications: Material: Iron Color: Black Package List: 1 * Flywheel Locking Tool 2800 Flywheel/Flexplate Holding Tool, Steel, Black Oxide For Chevy/GM, LS1, LS2, LS3, LS6, Each.
- 1.100% TIG welded,featured with high strength and reliability.
- 2.Comes with four proper length bolts.
- 3.Use on engine stand or in the vehicle. Bolts in place of starter.
- 4.Easy to install - just bolts in place of your starter and locks securely into the flywheel teeth.
- 5.30 days free full refund if not satisfied with our this item.
User questions & answers
| Question: | Does this tool fit on ford escape dohc 3.0 engine |
| Answer: | No, it doesn't fit. |
| Question: | Will this work on the gen 5 lt engines |
| Answer: | I used on Lt1 corvette1998 engine and fits perfectly and that fits but I’m not really sure. |
| Question: | Will this work for a 7.5l (455) Oldsmobile |
| Answer: | No this is for 4.8 5.3 and 6.0 LS engines. |
| Question: | Will it work on 2009 Chevy impala ltz |
| Answer: | Probably not. This part is for LS motors |
ICT Billet LS Stacked Coolant Steam Crossover Tube for 3 Bolt DBC DBW Gen 3 Throttle Body Stainless Steel Braided Hose Kit LS1 LSX LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 551675
ICT Billet
- Compatible with all GM LS series engines
- Passenger side port adapter has two 1/8"npt ports, drivers side port adapter has one 1/8"npt port
- Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum
- Can be installed on the front or rear of the cylinder heads
- 1/8" NPT threaded ports
User questions & answers
| Question: | Will this fit in a 2005 Chevy Tahoe Z |
| Answer: | Hello, Yes this will work for your 5.3 without issue. Thank you |
| Question: | Will this fit with a stock LS3 intake and throttle body |
| Answer: | It should fit without issues - it sits fair enough back that throttle body doesn't affect it, and cleared my LS6 intake no problem. |
| Question: | what is the torque spec on tightening these down |
| Answer: | Hello, 11 lt/lb. Thanks Luke! |
| Question: | Can a temp sensor go into this adapter |
| Answer: | Hello, The fitting on the passenger side head has a 1/8TH NPT hole, if your sensor has a 1/8Th thread it will thread into this fitting. We are unsure on clearance with the rest of your accessory drive, or intake/throttle body combination. Thanks! |
Product features
ICT Billet LS Stacked Coolant Steam Crossover Tube for 3 Bolt DBC DBW Gen 3 Throttle Body Stainless Steel Braided Hose Kit LS1 LSX LM7 LR4 LQ4 LS6 L59 551675
ICT Billet LS Stacked Coolant Steam Crossover Tube for 3 Bolt DBC DBW Gen 3 Throttle Body Stainless Steel Braided Hose Kit LS1 LSX LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33.Coolant Steam Crossover Hose Kit .Compatible with: all GM LS series enginesPassengers side port adapter has two 1/8"npt ports, drivers side port adapter has one 1/8"npt port.It Includes: 2 orings, 2 bolts, 2 coolant ports,1 fitting (1/4" hose barb, to radiator), and 1 stainless steel braided hose .
Premium Materials
We only use premium grade, USA produced materials for our parts. We engineer all our parts in the USA, then use USA made equipment to produce them.
Exceptional Quality
We make swapping an engine into your vehicle affordable by utilizing the most efficient manufacturing technologies in our facility. Having great cost does not mean that you must sacrifice quality.
Research and Development
At ICT Billet, we utilize the latest in technology to ensure each product fits the first time. We laser scan each vehicle, then produce a solid model to test fit our products to have a perfect fit every time.
American Made
Our goal is to use as many USA-made components as possible to keep our jobs in America. We use US-made materials, belt tensioners, metric flange bolts, pulleys and many other components that are manufactured in the USA for reliability.
Complete LS Swap Shop
We offer a full line of LS swap components from engine mounts to wiring.
SEMA Strong
As a SEMA member we take pride in being part of an elite group of automotive manufacturers. We provide the highest level of quality and development into our products.
YHB Full Engine Mount Adapter Plates Urethane Swap Kit Compatible with GMC Sonoma S15 Chevrolet Blazer S10 LSx LS1 LS2 LS
Product description
Product Description:
1/4" laser cut steel multi position design for extreme durability.
Engine Mount adapter plates are adjustable to allow for setting the new engine in its factory position.
High quality steel constructions. Built to strict quality control standards.
Instruction is not included.
Professional installation is highly recommended.
Color：Raw Sliver
Package Includes:
Engine Mount Adapter Plates with Urethane Frame Mounts Kit.
(x8) flange head engine mount bolts
(x2) motor mount bolts, washers & Hex nuts
(x2) 1/4" laser cut motor mount adapter plates
(x2) 2.8L Sonoma / S10 Urethane Frame Mounts
As the picture shown
Fitment:
1983-2005 Chevy Blazer / S10 pickup 2WD 2.8L
1983-2005 GMC Jimmy / S15 / Sonoma pickup 2WD 2.8L
GM LS(LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8 5.3 6.0 6.2) engine
- 🚗 Fit：1983-2005 GMC Sonoma,GMC S15,Chevrolet S10.Originally equipped with a 2.8l Chevrolet engine.see more detail in(Product description)
- 🚗 1/4" laser cut steel multi position design for extreme durability.
- 🚗 Includes: (x8) flange head engine mount bolts,(x2)motor mount bolts, washers & Hex nuts ,(x2)1/4" laser cut motor mount adapter plates,(x2)2.8L Urethane Frame Mounts .As the picture shown.
- 🚗 Material：High quality steel constructions. Built to strict quality control standards. Instruction is not included.
- 🚗 Recommended professional installation
Latest Reviews
View all
Mens Trifold Wallets
- Updated: 28.05.2023
- Read reviews
Nature Made Super B Complex Ingredients
- Updated: 19.07.2023
- Read reviews
Nyx Lip Brushes
- Updated: 11.03.2023
- Read reviews
Snow Glasses
- Updated: 01.04.2023
- Read reviews
Master Cool Swamp Coolers
- Updated: 28.02.2023
- Read reviews