11 best duramax engines

Product description

XP18HPE 4 Stroke OHV 3600 RPM Engine with Electric Start 17 Gallon Fuel Tank 18 HP Motor

• Horsepower: 18hp, Crankshaft Direction: Horizontal
• Model: XP18HPE, Brand: DuroMax
• Fuel Type: Gasoline

User questions & answers

Question:	If i was to put this motor onto a mini bike with a head and tail lgiht would this be able to keep the light running? Or charge a battery
Answer:	They all came keyed the same
Question:	What type of motor oil
Answer:	Yes, all 4 were keyed alike, a pleasant surprise
Question:	Is There a conversion kit for 120 Volt Starter
Answer:	Yes, all 4 of mine were keyed alike
Question:	One person said that the carberator is not set up for the cable system on a go kart so how could I make it work on my go kart.Thanks
Answer:	I found the metal gussets barely adequate for a 10ft wide shed. And the metal parts to hold the studs were not at all adequate - the side walls wanted to bow once the roof was on, so had to toe nail them also. The gussets at the top of the side walls direct the weight with more of a lateral component then vertical, and the side walls studs do not nail directly into the 2x4 at the top which is at an angle in the gusset there. That angle also makes putting inside walls up a hassle - the metal gussets slant across the top of the inside wall at an angle which is different from the angle of the 2x4's of the roof/ceiling, so you have to cut a notch for the gusset to extend through on the inside wall and the inside ceiling, and then figure a way to cover that metal gusset. If you look carefully at the image you'll see what I mean. If you are not going to have an inside wall or ceiling, not an issue.

Product description

Improve the feel and handling of your truck with Diesel Performance motor mounts. These mounts use heavy-duty polyurethane to hold your motor securely in place, preventing rocking even in high torque and horsepower situations. You get the alignment features of stock mounts with far greater performance and durability. Kits come with two motor mounts and high-grade fasteners Plus, they're backed with a 1-year warranty. Get yours today.

• Heavy-Duty Polyurethane

Product description

OTC's Injector Puller for 2001-2004 GM Duramax 6.6L engines safely pulls the injectors without pulling the injector cups. Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out. Durable steel construction means tool will withstand heavy shop use and continue to perform as designed. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-44639
• For use on 2001-2004 model year GM Duramax 6.6L engines
• Safely pulls the injectors from the cylinder heads without pulling the injector cups
• Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out
• Durable steel construction means tool will withstand heavy shop use and continue to perform as designed

User questions & answers

Question:	Does this have warranty
Answer:	I was told every OTC hand tool has a warranty
Question:	Will this work for 08 lmm
Answer:	My engine is an older duramax so probably not
Question:	Will this tool work for a lbz duramax
Answer:	I don't think it will fit as it is made to fit the internally mounted LB7 injector with a larger hold down opening, the OTC 6779 Injector Puller found on Amazon to replace GM Special Tool # J-46594 is for the externally mounted LLY, LBZ, and LMM injectors with the smaller hold downs.
Question:	What is this tool made of? The picture make it look like resin
Answer:	It is made of steel but to be completely honest I didn't even use it for the fact ur likely to remove the injector cups as well I help out a buddy who is a ase mechanic and he said" the hundreds I've replaced ive never used a puller" he showed me u just stick a pry bar behind the thickest part of the injector out a little pressure then just wiggle back and forth and they will pop right out
Question:	Will this fit 2004.5 lly duramax
Answer:	Yes. Fits all LLY!!
Question:	Does it come with a gasket
Answer:	Yes. And new bolts for installation
Question:	Will this fit a stock lbz? No lift
Answer:	Not sure on the lbz. But on my lmm. It clears the factory. Crossmember. Under the pan. And the stock skid plate goes back on and covers the pan
Question:	Does it fit under the OEM skid plate
Answer:	Yes. If it fits over the cross member it fits over the skid plate as this good plate bolts onto the crossmember.

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

Engine Oil Cooler Gasket & Seal Kit.

Includes all O-rings, Seals and Gaskets to remove and rebuild the engine oil cooler.

We include Delco PN: 97192666 for the 90° water casting, however we find it works best to use Permatex The Right Stuff in place of this gasket.

Fits: 2001-2010 Chevy/GMC 6.6l Duramax LB7 LLY LBZ LMM engines.

Product description

NEW Top Quality Heavy Gauge Block Heater Cord. Compatible with: All 2001-2017 Duramax 6.6L Diesel Engines in any vehicle. 5 feet long power cord for 120V AC. This cord can easily and safely power heaters up to 1500w. Made with a high quality flexible rubber sheathing (not a cheap plastic covering that cracks in the cold) This little cord can be a hard to find part ..... and worth every penny in a cold climate. Plug ends are molded into cord, not just glued on to it like products of lesser quality. Keeps moisture out. Works with OEM factory heater. Replace an old heater cord with this tough economical cord. No complicated (and expensive) built-in thermostat to let you down later.

• Compatible with: All 2001-2017 Duramax 6.6L Diesel Engines Chevy GMC 2500 3500
• High Quality Rubber for long life and flexability in the cold.
• Heat sheilding and Cap included!
• 1500w rated

User questions & answers

Question:	will this fit my 2004.5 gmc sierra LLY
Answer:	No it will not work on a 2019. It is designed to work on 2001-2016 Duramax Diesel 6.6L. MadJack Diesel dot com 805-531-9551
Question:	Will this fit my 03 lb7 duramax
Answer:	It must be something like that because it will be the most expensive bolt you will ever buy! Seriously, I wanted peace of mind on an upcoming long trip.
Question:	Does this come with the heating element
Answer:	No it will not work on a 2019. Application is for 2001-2016 Duramax 6.6L Diesel and other applications using same thread size which is M14 x 20 - 1.5 MadJack Diesel dot com 805-531-9551
Question:	where do you plug the block heater in
Answer:	Yes the hoist is wider.

• You can return this item for any reason: no shipping charges. The item must be returned in new and unused condition.
• Read the full returns policy

User questions & answers

Question:	Does this come with a gasket and hardware
Answer:	This oil pan does come with new bolt, but you use a high quality, high temp silicone for your oil pan gasket
Question:	LMM - two reviews said they had to do some mods to remove and bolt on new. Is this easily slip off and on or is there pieces you need to remove
Answer:	I put it on an LLY You have to take the oil level sensor out of the old pan, other than that a bolt on.
Question:	After removing the cross member and installing the pan, can the cross member be reinstalled? If not what would that do to the warranty
Answer:	You have to reinstall the cross member.

• Compatible with:Duramax 6.6L V8 Diesel Engine 2017-2019 Chevy Silverado/GMC Sierra 2500HD 3500HD.
• Replaces Part Number:A3231C,84262965,CA12258,33-5065,LAF3231,A41474,WA10695.
• Function: It traps airborne particles before they enter the engine and supplies the cleanest possible air with the least airflow restriction to the engine.
• Package Includes:1 x Air filter.Ensures maximum airflow to prevent engine wear.
• Warm Hint:Please replace the filter each 12,000 miles to keep the engine in good condition.

Product features

Compatible with

2017-2019 Chevy Silverado 2500HD 6.6L V8

2017-2019 Chevy Silverado 3500HD 6.6L V8

2017-2019 GMC Sierra 2500HD 6.6L V8

2017-2019 GMC Sierra 3500HD 6.6L V8

Function

The air flow direction is as the picture showed.It traps airborne particles before they enter the engine and supplies the cleanest possible air with the least airflow restriction to the engine.Keeps dust and debris out of your motor.Without a clean engine air filter in place, your vehicle's engine could suffer damage or decrease in efficiency as dirt particles impede complete combustion.

Product description

The GXP rear engine cover coolant return plug for your 2011-2016 GM 6.6L Duramax LML adds a finishing touch to the under the hood of your truck, such as when you're putting on an aftermarket turbo. Built from durable high quality 6061 aluminum, this plug features an anodized black finishand also includes a high temperature silicone O-ring to ensure you won't have any leaks.

 

Features:

• Black Anodized Finish
• High-Temperature Silicone O-Ring
• 1-Year Warranty

 

• The GXP rear engine cover coolant return plug for your 2011-2016 GM 6.6L Duramax LML adds a finishing touch to the under the hood of your truck, such as when you're putting on an aftermarket turbo. Built from durable high quality 6061 aluminum, this plug features an anodized black finishand also includes a high temperature silicone O-ring to ensure you won't have any leaks.
• Black Anodized Finish
• High-Temperature Silicone O-Ring
• 1-Year Warranty
• Compatible with 2011-2016 GM 6.6L LML Duramax Diesel

Product description

Duramax Diesel Engine Oil Fluid Dipstick is a direct fit for the following:



2001-2006 Silverado 2500 HD

2001-2006 Silverado 3500

2001-2005 Suburban 2500

2001-2006 GMC Sierra 2500 HD

2001-2006

Sierra 3500 2001-2005 Yukon XL 2500



Genuine Part Number: 97287502

• ************************** DURAMAX V8 *************** FITS:
• 2001-2006 Silverado 2500 HD ...... 2001-2006 Silverado 3500
• 2001-2005 Suburban 2500 ....... 2001-2006 Sierra 2500
• 2001-2005 Yukon XL 2500
• O.E. PART # 97287502 6.6