12 best small radiator

Product description

Radiator:

This aluminum radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This Aluminum Radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.



Radiator Fan(s):

Just like other major components in the car, the radiator cannot work on its own. It has supporting parts that help it perform its function more efficiently. In order for the radiator to reduce temperature of the water and coolant mixture that goes through the engine, it needs airflow that absorbs the heat and assists evaporation. Radiator fans are used to draw the air towards the radiator and help in the cooling process.



High performance radiator fan may be used to replace your OE product for more efficient cooling. They allow more air to circulate around the radiator and they need less horsepower to operate too, making them ideal for your radiator fan replacement. Also, These Slim Fans have an ultra slim design so the fan can be installed easily against your radiator, in the most convenient position to allow for more leniencies for other aftermarket parts.



Package Included:

1 x Aluminum Radiator

1 x Slim Radiator Fan

1 x Fan Mount Kit



This product is compatible with:

92-00 Honda Civic MT

93-97 Honda Del Sol MT

94-01 Acura Integra MT (HALF SIZE)

• ▶️ High Performance 2-Row Racing Design / Improves Cooling by 35 - 45% Temp.
• ▶️ Radiator Overall Size: 14.5" x 16.5" x 1.75" / Core Size: 14.25" x 13.75" x 1.5" / Inlet/Outlet: 1.25"/ 1.25"
• ▶️ Fan Aids to Cool Down the Entire Engine Bay: Including Radiator, A/C System, Intercooler, Oil System, and Transmission
• ▶️ Fan Diameter (in): 12.375" / Maximum Fan CFM: 1730 cfm / Maximum Fan RPM: 2,250 rpm / Thickness (in): 2.5" / Amp Draw: 12.70 amps
• ▶️ Application: 92-00 Honda Civic, 93-97 Honda Del Sol, 94-01 Acura Integra (Half Size) / Fits Manual Transmission Model Only

User questions & answers

Question:	Will this fit a honda accord 92 f22a1 engine
Answer:	As an OEM replacement, NO. It will not fit because the mounts at the top and bottom do not align with yours. But, if you are looking to make room and willing to drill some holes, ect. Than you can rig it to fit. Depends on what your goal is. This smaller "formfactor" radiator will cool the engine plenty. But, again, this will not fit unless you do some modification. Just look for the larger more rectangular one if you are looking to replace. Aluminum all the way.
Question:	What type of warranty do you give
Answer:	They don't really say on their site. But, I believe they except returns on defective parts. The radiator itself seems to be well constructed. Have it installed and running strong for about 2 years. No issues.
Question:	Will it fit a 96 Civic swapped with an H22A, and which size would be better
Answer:	Biggest you can get. I had cooling issues on built stage 3 B18&b16 with this rad
Question:	Will this fit a 98 Acura gsr
Answer:	Yes. It will fit any 1988-2000 civic, CRX, or integra.

Product description

This aluminum radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This aluminum radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.

• Made of high quality full t-6061 aluminum construction
• Stronger and higher capacity for coolant than stock units
• High performance 2-row racing design/improves cooling by 35 - 45% temp
• Overall dimension: 14.25" X 16.5" X 1.75"/core dimension: 14" X 13.75" X 1.5"

User questions & answers

Question:	So the inlet and outlet are too big. So what hoses do I have to get to work with this noting the engine inlet/outlet are smaller too
Answer:	Probably not ideal for the hoses but with a little lube, a lot of cussing and brute force, they will stretch just enough to barely fit.
Question:	Automatic o manual Transmission? honda civic 96? d
Answer:	Put one in my 96 d16 manual , believe it has auto trans cooler
Question:	Will this fit a automatic transmission
Answer:	No, does not have the tr acc ns cooler
Question:	Does the draincock open clockwise or counter clockwise? I've tried both and it feels like its about to break either way. thanks in advance everyone
Answer:	It is the normal threads, so it opens by turning counter clockwise, or left.

Product features

Item Specification

Color: Silver

Rows: 2

Materials: T-6061 Aluminum

Surface Finish: Polished Aluminum

Overall Size: 14.5" x 16.5" x 1.75"

Core Dimensions: 14.25" x 13.75" x 1.50"

Inlet / Outlet Diameter: 1.25" / 1.25"

Compatible with

92-00 Honda Civic MT

93-97 Honda Del Sol MT

94-01 Acura Integra MT (HALF SIZE)

Easy Installation

Direct Bolt-On OE Fitment or Replacement.

Notes: Installation instruction is not included. Professional installer is highly recommended!

Importance of Radiators

A radiator is used to help keep the engine cool. During operation, the engine’s moving parts create friction, which produces heat. The heat from the friction can be enough to cause damage to the engine if it is not cooled properly. The coolant will lose its heat into the atmosphere and is then pumped back into the engine where it absorbs and removes more of the engine’s heat. This can help keep the engine from overheating. Having the radiator maintained can also help to prevent a costly repair bill if the vehicle has a breakdown.

High Quality of DNA

Our professional technicians do heavy research and development in testing car applications and fitments for our products.

We also do rigorous testing on the strength, durability, as well as longevity of the material in order to make sure when the product arrives at the consumers end that it’s ready to go without worries.

• AGPTEK well male durable Aluminum Heat Exchanger Radiator using integrated forging process
• Applicable to computer CPU,industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.
• Using the black oxidation paint to increase the thermal efficiency
• No weak welds or glue.
• Size:main size: 10.62inchx4.72inchx1.18inch(265mm x 120mm x 30mm); For Pipe Diameter: 9.5MM (3/8 inch)

User questions & answers

Question:	Can this be used with 200 psi of air
Answer:	No chance, even automotive radiator don't run under anywhere near the level. Why do you need to cool 200 psi air?
Question:	What is the screw size needed to hold the fan in place on the threaded portion of the radiator
Answer:	I didn't receive screws for mine, it was just the radiatior in the box and there is no screws mentioned in the listing...maybe you should have mentioned the size...
Question:	What is the flow pattern
Answer:	Sure what you mean by the flow pattern but there are 2 quarts on the unit one is in and one is out and it doesn't matter which is which. I place two box fans on one side and use it to cool water for a wort chiller for brewing beer. And it was fans is in a freezer and I pump water through the port and it shows it down very well.
Question:	Can this be used for a radiator? For a motorcycle
Answer:	No, it will not support that kind of heat load.

Product features

Better Heat Dissipation

Built-in water separator to keep the water mixed and keep the water away from the equipment to ensure safety. stripe design can effectively improve the efficiency of heat transferring

High-Q Aluminium material

Effectively for heat reducing, maintain the proper temperature to keep your computer running well.AGPTEK aluminum heat exchanger can be used for CPU, CO2 laser hear, water , VGA water cooling ,cool system,etc.

Optimized for high performance at low cost

• No weak welds nor leakage
• Density of Heat Sink: 18 zigzag/inch.
• Flat Pipe: 12
• Fan Installation Hole: 105mm x 105mm
• For Pipe Diameter（The nozzle Outer diameter:）: 9.5MM (3/8 inch)
• Screw holes:M3

Note:

As the Professional Heat Exchanger Radiator manufacturer，We have two size heat radiators for choice,CPR1(12pipe 6.2inch ) CPR2(12 Pipe 10.62inch) ,please choose the right size you need.

Package Included:

1 x AGPTEK Aluminum Heat Exchanger

Product description

The radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This Aluminum Radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.

Vehicle Fitment

For 1987-2006 Jeep Wrangler YJ TJ 2.4L & 2.5L & 4.0L & 4.2L, L4 L6 Engines

Specifications

Material: Full Aluminium

Core Row: 3 Row Core

Core Size 17 1/2" H x 22 1/4" W

Overall Size: 22.95" H x 25.87" W

Upper inlet: 1 1/4"

Lower outlet: 1 1/2"(G1/4)

Package Includes

1 x 3 Row Aluminum Radiator

• ★ 3 ROW ALUMINUM RADIATOR!- The OzCoolingParts Radiator is made of full aircraft 5057 grade aluminum and with raw aluminum finish, all item is 100% inspected and tested for quality assurance.
• The Radiator is made of full aircraft 5057 grade aluminum and with raw aluminum finish, all item is 100% inspected and tested for quality assurance.
• for Jeep Wrangler YJ TJ 1987-2006 2.4L & 2.5L & 4.0L & 4.2L, L4 L6 Auto Engines. Please check the vehicle fit before you buy!
• item will be shipped out within 48 hours from our USA warehouse. Fast fulfilment and delivery, 3-5 working days will be delivered under normal circumstances. Do not hesitate to get one!
• High performance racing design, improves cooling by 35 -45% Temp, build-in transmission cooler.

User questions & answers

Question:	How thick is the core
Answer:	It has no odor to speak of, however, if you ate it surely YES and if you get it on something it will not come off and if not careful. you can glue your fingers together. I'm sure you get the picture now? Keep out of the reach of children.
Question:	Is this for automatc ttans 42rle
Answer:	I’ve had mine on (with kiss nail glue) for going on 2 weeks. I had 1 pop off when I was loading my fireplace.. I just replaced it and no more have come off. Bout time to change them though! They’ve grown out!
Question:	What kind of coolant should I use for aluminum radiators
Answer:	Yes, I use it to do dip. It’s really strong I love it! Be careful because it will glue your fingers together.
Question:	Is this for an automatic Jeep or manual
Answer:	Wrap each nail in piece of cotton soaked in acetone, cover each finger with foil and leave on for at least 30 minutes. Gently file off loose stuff. Repeat if necessary.

Product description

Aluminum Racing Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This Racing Radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.



Package Included:

1 x Radiator



This product is compatible with:

Jeep Cherokee (1991-2001)

Jeep Comanche (1991-1992)

Automatic and Manual Transmission

Models with 2.5L 150Cu In. l4 / 4.0L 242Cu In. l6

• ▶️ Constructed of High Quality T-6061 Aluminum Construction. High Performance JDM Spec. 3-Row Racing Design
• ▶️ Light Weight Direct Bolt-On OEM Fitment or Replacement. Stronger & Higher Capacity for Coolant than Stock Units
• ▶️ Highly Increase Cooling Performance
• ▶️ Overall Size: 35.00 x 11.50 x 2.50 Inch. Core Size: 31.00 x 11.25 x 2.00 Inch
• ▶️ Inlet/Outlet Diameter: 1.25"/ 1.50"

User questions & answers

Question:	What fittings does it take for trans cooler/warmer.. If you don't know don't answer with don't buy it
Answer:	The Auto Dynasty 3 row aluminum radiator has the same bungs welded into the left tank as Mopar original equipment radiators. When you remove the old radiator from Jeep, remove the two brass fittings from the old radiator that the transmission cooling lines attached to. Install those brass fittings into the aluminum radiator using Teflon tape on the threads for sealing. YOU WILL NOT NEED TO FIND NEW FITTINGS to install and the new radiator and attach the trans cooling lines.
Question:	what. size. fittings. for. the. trans. cooler?!! four people have asked this question and not one person has answered it
Answer:	The stock fittings fit . I have no complaints with this part. You may need to mod the core support for the cap. neck is a little short.
Question:	What are the correct fittings for the trans cooler
Answer:	It is a very good product made my jeep run a lot cooler
Question:	What size fittings are the correct
Answer:	mine is a 91 and was a bolt in, the hoses were even provided. they have a history of heating up a bit, with AC on it ran about over 220, but I also installed a HP. water pump, in dead stop traffic with AC on full blast I cant get temp above 165-170.!!!! you have to get this item, out of 4500.oo in parts, spend 100.00 on RADiator, and 55.00 on High Perf. Water pump, assuming you run a 4.0LTR HP MTR in a Cherokee with over 200K Mi. I also put a snorkel on the air intake wich keeps all that hot air away from your intake. 30 yrs of jeeps says dont miss this no matter what..!!!!!!!!

Product description

EK-CoolStream Classic SE 120 slim copper radiators are designed for optimal airflow throughout the radiator surface with medium density fin structure. Built for EK-Vardar 120mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low and high airflow operation.

EK quality level, best price-performance ratio to date and unique minimalistic design make these EK-CoolStream Classic SE series radiators a perfect choice for any computer water cooled system. 27mm thick design allows for utilization even in the space-constrained cases while allowing great cooling potential due to the high-performance core engine.

This product features two G1/4 threaded ports. EK recommends the use of EK compression fittings.

Technical details:

Material:

- Copper fins

- 90% copper tubing (H90)

- Brass chambers

- Steel housing

Dimensions: 153 x 120 x 27mm (L x W x H)

Weight: 0.37kg

Liquid Capacity: ~85mL

FPI: 16

Port threads: 2x G1/4

Fan compatibility: any standard size 120x120x25mm fan; UNC 6-32 thread tapping

Pressure tested: 1bar(g)

Enclosed:

- EK-CoolStream Classic SE series radiator

- Phillips Slotted UNC 6-32 screws (l=30mm)

- Phillips Slotted UNC 6-32 screws (l=5mm)

PLEASE NOTE:

• When using fans other than standard 120x120x25mm size please use appropriately long screws!Use of the improperly long screws may result in piercing of the radiator core and irreparably damage the product. Such misuse is not covered by product warranty!
• This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109817315

• EK-CoolStream Classic SE 120 slim copper radiator for water cooling PCs
• Designed for optimal airflow throughout the radiator surface with medium density fin structure (FPI: 16).
• 27mm thick design allows for utilization even in the space-constrained cases while allowing great cooling potential
• This product features two G1/4 threaded ports. EK recommends the use of EK compression fittings.
• Dimensions: 153 x 120 x 27mm (L x W x H)

Product description

Specification: AGPTEK® aluminum heat exchanger can be used for CPU, CO2 laser hear, water , VGA water cooling ,cool system,etc. Optimized for high performance at low cost No weak welds nor leakage Density of Heat Sink: 18 zigzag/inch. Flat Pipe: 12 Fan Installation Hole: 105mm x 105mm For Pipe Diameter: 9.5MM (3/8 inch) Heat Exchanger size: 158mm x 120mm x 30mm(the main body size of Exchanger) Package Included: 1 x AGPTEK® Aluminum Heat Exchanger Trademark AGPtek products are marketed exclusively by Brainydeal, any misuse of AGPtek without prior approval from AGPtek will take legal action.

• AGPTEK well male durable Aluminum Heat Exchanger Radiator using integrated forging process.
• Applicable to computer CPU,industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.
• Using the black oxidation paint to increase the thermal efficiency
• No weak welds nor glue.
• Size:main size: 6.22inchx4.72inchx1.18inch(158mm x 120mm x 30mm); For Pipe Diameter: 9.5MM (3/8 inch)

User questions & answers

Question:	I’m making a water cooler for my little in line water filter. Can I mount perlet cooling plates to this and run my water line through it to cool
Answer:	This cool system works like heat exchanger radiator you need a fan to get enough airflow to cool the water. I would use a water block instead.
Question:	What is the maximum temperature that this radiator can handle without rupture
Answer:	I don't know. It would be pressure that would be the problem. It is a CPU cooling radiator so I would imagine it would not handle too high of temperatures. I use it for a mini AC.
Question:	Is there a screw can attach between the Radiator and Fan
Answer:	There are 4 holes on each side of the fan. They are pre-threaded to accept 4-40 machine screws. I actually attached 2 fans {120mm} with airflow going in the same direction {out of my computer case}. In my instance I used eight '1 1/4 inch' long screws. One set of 4 held a fan on one side.. The other set of four attached started outside the case, through a fan and attached to the radiator.
Question:	What screw sizes are the 4 corners tapped for
Answer:	They are not 4-40. If you use 4-40 they will strip out (found out the hard way). They are M3.

Product features

Details In Item

Our item measurement is 6.2"x 4.65"x 1.1",with 12 pipes and each gap is 0.31 inch.Details helps to choice the suitable one for your computer. It can use to two fans, it depends on your computer design.

Effectively for heat reducing, maintain the proper temperature to keep your computer running well. AGPTEK aluminum heat exchanger can be used for CPU, CO2 laser hear, water , VGA water cooling ,cool system,etc.

Widly Use:

• Specification: AGPTEK aluminum heat exchanger can be used for CPU, CO2 laser hear, water , VGA water cooling ,cool system,etc.
• Optimized for high performance at low cost
• No weak welds nor leakage
• Density of Heat Sink: 18 zigzag/inch.
• Flat Pipe: 12
• Fan Installation Hole: 105mm x 105mm
• For Pipe Diameter: 9.5MM (3/8 inch)
• Heat Exchanger size: 158mm x 120mm x 30mm(the main body size of Exchanger)

• ★ Product Name: Water Cooling Radiator; Outer Size: 275 x 120 x 30mm / 10.83'' x 4.72'' x 1.18''(L*W*H), Weight: 323g.
• ★ Fan Installation Size: 120 x 120 x 2(This product does not have a fan); Tube Quantity: 12; Rated Voltage: DC12V.
• ★ Efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation.
• ★ Made of pure aluminum fins with good heat dissipation, Using the black oxidation paint to increase the thermal efficiency.
• ★ Applicable to computer CPU, industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.

User questions & answers

Question:	What is the maximum temperature rating for the water running through the radiator
Answer:	Hello- See below for full list of ingredients. Ricinus Communis (Castor) Seed Oil, Triisostearyl Citrate, Vegetable Oil (Olus / Huile Vegetale), Beeswax (Cera Alba / Cire D´Abeille), Trioctyldodecyl Citrate, Silica, Butyrospermum Parkii (Shea) Butter, Euphorbia Cerifera (Candelilla) Wax (Candelilla Cera / Cire De Candelilla), Simmondsia Chinensis (Jojoba) Seed Oil, Synthetic Wax, Copernicia Cerifera (Carnauba) Wax (Cera Carnauba / Cire De Carnauba), Calcium Carbonate, Cetyl Ricinoleate, Hydrogenated Vegetable Oil, Polyethylene, Phenoxyethanol, Isostearyl Alcohol, Jojoba Esters, Tocopherol, Helianthus Annuus (Sunflower) Seed Wax, Lauryl PCA, Glycine Soja (Soybean) Oil, Citric Acid, Acacia Decurrens Flower Wax, Polyglycerin-3, Titanium Dioxide (CI 77891), Red 7 Lake (CI 15850), Iron Oxides (CI 77491), Yellow 5 Lake (CI 19140), Iron Oxides (CI 77499), Blue 1 Lake (CI 42090). Lipstick Queen
Question:	So what is inner diameter of the flex tube
Answer:	Some kind of jelly I think.
Question:	Can they be submersed in water for liquid to liquid cooling
Answer:	On me the stain was very, very light. Wore off after eating. I was disappointed overall. I’m A fair skinned blonde.
Question:	It looks like just a radiator. Why does it say 12 volts DC
Answer:	No, I don't believe so....it does have Candelilla wax.

Product features

Water Cooling Radiator

- Color: Black

- Material: Aluminum

- Mouth: 9.5 (D) mm

- Fin Density: 18 lines per inch

- Fit ID Tube Inner Diameter: 8 -12mm / 0.3'' - 0.5''

- Fit ID Tube Outer Diameter: 9.5 mm / 0.37''

- Longer Screw Size: 31 x 3 mm / 1.2'' x 0.12''(L*D)

- Shorter Screw Size: 7 x 3 mm / 0.3'' x 0.12''(L*D)

Product size includes: 80mm 120mm 240mm

• Without tube With fan

Water Cooling Radiator

- Color: Black

- Tube Quantity: 12

- Material: Thick Copper

- Fitting Thread: G1/4

- Fin Density: 18 lines per inch

- Longer Screw Size: 31 x 3 mm / 1.2'' x 0.12''(L*D)

- Shorter Screw Size: 7 x 3 mm / 0.3'' x 0.12''(L*D)

Product size includes: 120mm 240mm 360mm

• Without tube
• Without fan

Water Cooling Radiator

- Color: Black

- Material: Aluminum

- Fitting Thread: G1/4

- Fin Density: 18 lines per inch

- Longer Screw Size: 31 x 3 mm / 1.2'' x 0.12''(L*D)

- Shorter Screw Size: 7 x 3 mm / 0.3'' x 0.12''(L*D)

Product size includes: 80mm 120mm 240mm

• Without tube
• Without fan

Water Cooling Radiator

- Color: Black

- Material: Aluminum

- Mouth: 9.5 (D) mm

- Fin Density: 18 lines per inch

- Fit ID Tube Inner Diameter: 8 -12mm / 0.3'' - 0.5''

- Fit ID Tube Outer Diameter: 9.5 mm / 0.37''

- Longer Screw Size: 31 x 3 mm / 1.2'' x 0.12''(L*D)

- Shorter Screw Size: 7 x 3 mm / 0.3'' x 0.12''(L*D)

Product size includes: 80mm 120mm 240mm 360mm

• With 1 meter tube

Water Cooling Radiator

- Color: Black

- Material: Aluminum

- Mouth: 9.5 (D) mm

- Fin Density: 18 lines per inch

- Fit ID Tube Inner Diameter: 8 -12mm / 0.3'' - 0.5''

- Fit ID Tube Outer Diameter: 9.5 mm / 0.37''

- Longer Screw Size: 31 x 3 mm / 1.2'' x 0.12''(L*D)

- Shorter Screw Size: 7 x 3 mm / 0.3'' x 0.12''(L*D)

Product size includes: 80mm 120mm 240mm

Fin

Fin Density: 18 lines per inch

G1/4

- Fitting Thread: G1/4

- Fin Density: 18 lines per inch

N8

- Fit ID Tube Inner Diameter: 8 -12mm / 0.3'' - 0.5''

- Fit ID Tube Outer Diameter: 9.5 mm / 0.37''

Spray paint

Aluminum housing Dark paint

Product description

Product Name: Water Cooling Radiator

Product Specifications:

- Fin density: 18 lines per inch

- Color: Black

- Type: Water Cooling; Material: Aluminum

- Mouth: 9.5 (D) mm; Model Number: 120mm

- Longer Screw Size: 31 x 3 mm / 1.2'' x 0.12''(L*D)

- Size: 157 x 120 x 32mm / 6.2'' x 4.7'' x 1.26''(L*W*H)

- Tube Quantity: 10; Fit ID Tube Inner Diameter: 8 -12mm / 0.3'' - 0.5''

- Fit ID Tube Outer Diameter: 9.5 mm / 0.37''; Shorter Screw Size: 7 x 3 mm / 0.3'' x 0.12''(L*D)

Product Features:

- Pure aluminum fins

- Parts brazing seal as a whole

- Surface treatment: Dark paint

- Joint: disposable stainless steel-band

- The sealing process: vacuum aluminum brazing

- Item Type: Computer Radiator Water Cooling Cooler; Material: Metal

- Can be installed 120mm fan, mounting hole size: 109.5（D）×109.5（W）mm



✔Optimized for high performance at low cost,No weak welds nor leakage.

✔Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.



Package Included:

1 x Water Cooling Radiator (This product does not have a fan)



PLEASE NOTE: Please pay attention to the length of the screw. If the screw is too long, it will pierce the flat copper tube and cause water leakage. In this case, the manufacturer is not guaranteed! The original factory is equipped with M3x30mm screws, which is suitable for a 120mm fan with a thickness of 25mm. If you use a thinner fan, or if the screw hole of the fan is unique, please choose the right length of the screw. The principle is that when the screw is pressed against the fan, the length of the screw protruding from the cold row mounting surface must not exceed 5 mm.

• ✅ Product Name: Water Cooling Radiator; Outer Size: 157 x 120 x 32mm / 6.2'' x 4.7'' x 1.26''(L*W*H).
• ✅ Fan Installation Size: 120x 120mm(This product does not have a fan);Tube Quantity: 10; Rated Voltage: DC12V.
• ✅ Made of pure aluminum fins with good heat dissipation, Using the black oxidation paint to increase the thermal efficiency.
• ✅ Efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation.
• ✅ Applicable to computer CPU, industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.

User questions & answers

Question:	whats the wattage of the fan
Answer:	No fan included in this product.

• Made of aluminum,very sturdy
• Matte Black Painted Frame,Core
• The connector outer diameter is 9.5 mm,Can Installed 3* 120x120mm fan
• Suitable for water-cooled computer CPU, industrial variable frequency drives, the laser head cooling, air conditioning evaporator and industrial control cabinet cooling

User questions & answers

Question:	What size hose does it take
Answer:	It seems real to me! I like it.
Question:	Is this product made in USA
Answer:	They actually have one just for your skin. Do not use this particular one on your body/skin/face.
Question:	Can you run a dielectric oil or mineral oil through this radiator
Answer:	Wet. Spray it on before blow drying hair.
Question:	What is the screw type showing on the left side of the picture
Answer:	To be honest I don't know, as it is an oil it would probably help and it would definitely help to hydrate the damaged the coloring causes to hair and scalp.

Product description

Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. The customer is responsible for paying the shipping costs for returns of this part if the fitment tool has not been used. Prepaid return shipping labels will not be issued by the seller for this type of error.

Product Details

-Transmission Type: Automatic or Manual Transmission

-Core Material: Aluminum

-Tank Material: Plastic

-Transmission Oil Cooler: Yes

-Has Engine Oil Cooler: No

-Inlet Diameter: 1.38 in / 34.9 mm

-Outlet Diameter: 1.38 in / 34.9 mm

-Core Height: 25.5 in / 647.7 mm

-Core Width: 22.63 in / 574.7 mm

-Row Count: 1 Row

-Type: Radiator

-Color: Silver Core, Black Tank

-Style: Downflow

-Material: Aluminum, Plastic

-Radiator Cap Included: No

-Mounting Hardware Included: No

-Hardware Included: Oil Cooler Fittings

-Fitment Type: Direct Replacement

Six month warranty on all AutoShack parts.

Please Note - AutoShack does not provide free return shipping. Return Shipping cost in only covered in the event of an AutoShack error.

• Brand-new radiator engineered and manufactured to meet OEM specifications for easy installation. Direct fit and built to last long with high quality aluminum core and plastic tanks preventing corrosion.
• 100% Leak Tested backed by a 6-month warranty. Package includes 1 complete radiator. No radiator cap or sensor included.
• OE / Interchange: CU1755. Core Thickness is 7/8" and Core Dimensions are 25-1/2" H x 22-5/8" W.
• Replacement for 1995-2004 Toyota Tacoma 2.7L 3.4L.
• Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application.

User questions & answers

Question:	This indicates it's for an automatic transmission. my truck is a 5 speed manual. it's has a 3.4 v6. will this fit and if not which one does? thanks
Answer:	Your truck is v6 so it may be different measure yor radiator between tanks and compare the dimensions with the ones you're looking to buy
Question:	Will this fit a 2001 v6 4x4 automatic Tacoma
Answer:	It Would Be Better To Measure Your Old One “ From Tank To Tank My Toyota Tacoma SR5 1999 4x4 For Some Reason Has The Large One It Might Change After 2000 .

Product description

Increases engine performance and throttle response. The ignition coil can perfectly fit your vehicle and generate high output energy, which can keep the engine running smoothly and well to provide you the best experience. Made of high-quality materials, rigorously tested for higher stability and reliability, meeting or exceeding OEM standards, it helps resolve problems caused by poor coils (such as vibration) and eliminates fire

• Efficient Fuel Consumption
• Part number: 2213102
• Package Weight: 13.2 pounds
• Included components: RADIATOR

User questions & answers

Question:	How does "Include installation +$199.99 per unit" option is working
Answer:	It's working perfectly fine.
Question:	Will this fit my 2007 Camry Hybrid
Answer:	I’m not sure. I have a 2007 Toyota Camry le.
Question:	Is this denso radiator 221-3102 part working for someone more than year or 2years
Answer:	I purchased and installed this radiator in December and it's working fine.
Question:	Is the Tank Metal
Answer:	Yes, it is metal. It’s fully compatible.