13 best spray on sound deadeners

Product description

Boom Mat Spray-On sound deadening is perfect for reducing unwanted road noise and deadening vibrations in those hard to reach places such as trunk interiors, fender wells, undercarriage, body panels, rear quarters, and inside door panels to name a few. Boom Mat Spray-On also serves as a thermal barrier insulating against unwanted heat. Whether you are looking for a quiet ride by eliminating squeaks, rattles, vibrations or unwanted engine and road noise, the benefits of Boom Mat Spray-On sound deadening can be used on any vehicle. Boom Mat Spray-On can be applied in multiple layers for even more sound deadening while handling temperatures up to 300 degrees Fahrenheit. It can be applied to non-coated surfaces and can be top coated with paint after only 6 hours of dry time. Boom Mat Spray-On is VOC (Volatile Organic Compounds) compliant in all 50 states. NOTE: This item has a two-year shelf life. The date on the bottom of the can is the item manufacturer date.

• Reduce unwanted road noise and vibration, even in hard-to-reach places
• Won't crack or chip; helps prevent rust
• Paintable in just 6 hours
• Single can will cover approximately 20 sq. ft.
• Fit type: Universal Fit

User questions & answers

Question:	want to make a car quieter (wheel wells + under carriage). after how many cans or layers of this stuff will i reach the point of diminishing returns
Answer:	From my use I have found that using more than 1 + 1/2 cans per 1 square foot (approximately) proved pretty much a waste. I would recommend coating the area evenly up to about a 1/4 inch think. If you wanna really get rid of the noise I suggest coating under the trunk mat avoiding the wire and electrical bits.
Question:	Can I use this on the engine hood and parts near the engine where it gets hot
Answer:	The manufacturer says it is good to 300 Fahrenheit. Your exhaust can potentially get higher than that but not likely. If you do use it in this capacity I would spray it to its thickness desired, let it dry 5-6 hrs and then top coat it with some high temp engine paint,color of your choosing. Try not to get any overspray on you exhaust headers. The stink will run a skunk out of the area...
Question:	does it work on wheel wells? I have a 2018 prius and the tires are loud. I will also be putting this on in my garage..........thanks
Answer:	Yes, this stuff works great to spray on wheel wells. I would strongly recommend against using this stuff in your garage as it inevitably makes a big mess and has a very strong petroleum/solvent smell to it.
Question:	Does this work anywhere near as well as mats on doors around the speakers to make the sound better
Answer:	In my experience this works well in conjunction with the mats and foam speaker baffles. Some older vehicle with little to no sound deadening in the doors, the boom mat spray can make a large difference by itself. Both for the audio and the quietness of the interior from road noise. I usually use one can per door. To allow good build up and good service from the product. I order by the case.

Product features

Boom Mat Spray-On Sound Deadening

Boom Mat Spray-On sound deadening is perfect for reducing unwanted road noise and deadening vibrations in those hard to reach places such as trunk interiors, fender wells, undercarriage, body panels, rear quarters, and inside door panels to name a few. Boom Mat Spray-On also serves as a thermal barrier insulating against unwanted heat. Whether you are looking for a quiet ride by eliminating squeaks, rattles, vibrations or unwanted engine and road noise, the benefits of Boom Mat Spray-On sound deadening can be used on any vehicle. Boom Mat Spray-On can be applied in multiple layers for even more sound deadening while handling temperatures up to 300 degrees Fahrenheit. It can be applied to non-coated surfaces and can be top coated with paint after only 6 hours of dry time.

Product description

3 Pack DEI Spray-On Boom Mat Thermal Acoustic Control This 3 Pack of Boom Mat Spray-On is perfect for those hard to reach places such as trunk interiors, fender wells, undercarriage, body panels, rear quarters and inside door panels to name a few. In addition to reducing noise, vibration and serving as an undercoating, Boom Mat Spray-On also serves as a thermal barrier insulating against heat. Features: Dries to Touch in 20 Minutes, Paintable in 6 Hours Each Can Covers Approximately 20 sq.ft. Enhance Audio Performance Helps Prevent Rust Won’t Crack or Chip Eliminate Road Noise Dampen Vibrations Great for Hard to Reach Spaces For Interior/Exterior Use **THIS LISTING IS INCLUDES THREE 18OZ CANS**

• Dries to Touch in 20 Minutes, Paintable in 6 Hours
• Each Can Covers Approximately 20 sq.ft.
• Enhance Audio Performance
• Helps Prevent Rust
• Won’t Crack or Chip

User questions & answers

Question:	Will this help drown out vocal noise
Answer:	No, its probably easier to just leave your wife at home. I don't think you'll ever get her to be quiet if you try to spray her with this.
Question:	What is the applied thickness
Answer:	Can’t put it on too thick or it will drop off. I let the coats dry somewhat and sprayed until I used up all 3 cans.
Question:	Will this stick to plastic
Answer:	Boom Mat Spray can work on plastics, but the result will vary. Typically, it is recommended to roughen the surface in these situations prior to applying the spray. New plastics that are still off-gassing from the molding process can be problematic.
Question:	Can i use this to help with noise caused by my mid tires
Answer:	That’s what I used it for. Bought a new Prius and the tire noise was bad. It reduced the road noise a lot. Also as the tires got more used the noise also was reduced.

• SOUND DEADENING SPRAY: Spectrum liquid sound dampening material is a high heat, water based viscoelastic polymer, formulated and tested by Second Skin to adhere to metal and stop it from vibrating. Stop the vibrations, stop the noise!
• CAR SOUND DEADENING & INSULATION: Used to dampen vibrations and stop thermal transfer on metal surfaces in all types of vehicles (cars, boats, trucks). Spectrum also works well on metal warehouse carts, sub-woofer boxes, and HVAC ducts. Spectrum works by stopping vibrations. It will NOT block or absorb airborne sound waves.
• ADVANTAGES OF LIQUID SPRAY: Spray Spectrum into hard to reach places that sound deadening mats have trouble, such as the undercarriage of the car and the wheel wells. Spectrum is temperature rated to 400 F, so you can even use it on the firewall!
• PAINT OR SPRAY ON SOUND DEADENING: Applied with a paint brush/roller or spray gun and air compressor. We recommend applying two layers of Spectrum Liquid Deadener to a total thickness of 2-3mm (thicker than a quarter). Max: 5mm
• PROUDLY MADE IN THE USA

User questions & answers

Question:	I live in Arizona...Will this product help keep the internal temperature of the car lower during summer months, much like a windshield shade
Answer:	This product does resist heat transfer and will help keep the heat out, but I wouldn't compare its effectiveness to a windshield shade (Probably much less effective? Have not tested one vs the other... good idea though!). Most people use it to resist heat transfer on a car's firewall or undercarriage. If I wanted to insulate a vehicle's roof, my first priority would be an insulating foam (like Second Skin's Mega Zorbe) or jute insulation (like Second Skin's Heat Wave Pro). You can combine with Spectrum for additional benefit, but one of those materials would be priority #1.
Question:	How tuff is this product
Answer:	Its pretty tough, we have it sprayed onto our sprinter van conversion floor, its holding up great.
Question:	If I use this in my wheel well and it gets wet would that be a problem
Answer:	Its water based but once it dries its waterproof. Just like water based paint, when dried it won't come off with water!
Question:	I'm looking to apply this to the inside of a Jeep Wrangler roof. How will it apply to the fiberglass top
Answer:	Spectrum needs a self etching fiber glass primer to bond to the fiber glass surface. Once the primer is cured Spectrum will bond very well, apply your (3) 1 mm coats to achieve recommended thickness. 30-60 minutes between coats above 50 degrees F. You can find this primer at your local paint or body shop, just ask for "self etching fiberglass primer for a water based acrylic polymer paint."

Product features

Stop unwanted noise with the right sound deadening materials.

At Second Skin, we pride ourselves in offering best-in-class solutions to help you eliminate unwanted noise and soundproof your car. Everything we sell has been tested in the field and in the lab to ensure you get the best possible results. We offer a comprehensive line of the best car insulation solutions for your vehicle. Whether you have rattling metal distorting your speakers, a car restoration side-gig, or just want to create a bubble of comfort for yourself as you drive down the highway, we have the high quality materials that will get you to your destination.

Why do cars make so much noise?

Noise inside the passenger compartment of a car comes from one of three sources:

1. Wind Noise: Noise that enters through gaps, holes, and open windows.
2. Structural Noise: Noise that is generated by vehicle mechanical systems and travels through the vehicle structure before radiating into the passenger compartment.
3. Airborne Noise: Noise that is generated by vehicle systems or an external source and enters the passenger compartment by first traveling through air, then passing through a body panel, and finally reradiating into the passenger compartment.

To fix wind noise, you need to plug the holes. To stop structure borne noise, you have to damp the metal. To eliminate airborne noise, you need to block it with a noise barrier.

Quality materials matter. You’ll only make that mistake once.

Spectrum Liquid Sound Deadener is a water-based, viscoelastic polymer formulated by Second Skin Audio for top-of-the-line vibration damping and adhesion. The acrylic polymers in Spectrum have been selected to reduce sheet metal resonance, stick to just about anything, and meet transportation safety standards. Spectrum is odorless, rustproof, waterproof, flame resistant, chemical resistant, non-toxic, and dries with a seamless, black finish. Spectrum can be applied with a spray gun, brush, or roller. For large surfaces or hard to reach areas (like the undercarriage and inside the wheel wells), spraying on Spectrum can be much easier than applying sound deadening mats.

• Apply Spectrum in 1mm layers to a recommended total thickness of 2mm.
• Easy to clean up with water within 30 minutes. Do not get on clothes or upholstery.
• Spectrum is designed to adhere to metal, but will stick to just about any cleaned surface besides plastic or a high gloss surface without a primer.
• Wait 24-36 hours before reinstalling upholstery, and one week before covering Spectrum with a bed liner or painting it.
• Spectrum is not a bed liner and can be damaged by heavy impact.
• Do not freeze! If frozen, do not move or mix until it has completely thawed.

Vibration Damper

• Stop vibrations and deaden structural noise
• Significantly outperforms asphalt and tar mats

Thermal Insulation

• Viscoelastic polymer resists heat transfer
• Temperature rated to 400 F

Reduce Road Noise

• Substantially reduce noise level in your car cabin
• Increase speaker performance

Health & Safety Tested

• Non-toxic and easy to clean up with water
• Meets all transportation safety standards

Decide

Decide what parts of the car you want to insulate first: roof, floor, doors, trunk, firewall, hood, wheel wells, or undercarriage. Insulating each part of the vehicle has its benefits. You likely need to do a little detective work to identify the noisiest parts of your car or truck. For the best results, you’ll need to soundproof all of your vehicle’s metal surfaces. Before installing any material though, step #1 is always to expose the sheet metal. For any metal surfaces behind plastic panels or upholstery, you’ll need to research how to remove them. Be careful to avoid breaking plastic trim parts or any fasteners. Detailed step-by-step guides can be found on our website or the one of the many automotive forums.

Remove

Remove all factory insulation to expose bare sheet metal. You can choose to mask off the insulation if it’s in good shape and you want to leave it. Ensure all debris, rust, and waxy oils are removed from the application surface. Clean the surface with denatured alcohol and a dry, clean rag. We do not recommend using a solvent or degreaser, as they can leave behind a film that will prevent the best bond from forming. Allow the metal to dry.

Prepare

Measure the cleaned surface to ensure you have enough Spectrum to cover the application area (1 gallon = 20 sq ft). Prep the surface for your chosen application method. The most effective way to apply Spectrum is to spray it on with a spray gun or airless sprayer. Before starting application, the panel should be masked off for overspray protection. If you use wire tape with plastic masking wrap, removing the plastic masking will be extremely easy and give you a clean cut edge. You don’t need to wear a paint mask, but it is recommended to spray in a well-ventilated area. If you’d rather paint or brush on your sound deadening, you can do that with a paint brush or roller.

Install

A primer is not needed except for plastic or high-gloss surfaces. You will need a spray gun designed to shoot a high viscosity, water-based acrylic polymer. Hook it up to a compressor with 50-80 PSI and a 6 gallon tank (reduce fill up time). Hold the spray gun 4 to 8 inches away from the panel and apply Spectrum with a slow, sweeping motion. The goal is a 1mm layer about as thick as a credit card. Always clean the spray gun immediately after applying a coat of Spectrum or it will cure in the gun. Allow 30 to 60 minutes between application layers, depending on temperature and humidity. We recommend 2mm of total thickness, but you can go up to 5mm.

Spectrum

Sound deadening is the hidden secret behind the upholstery of any car project. To reduce road noise, use Spectrum to stop the structural noise generated by vibrating metal. Stop the vibrations, stop the noise.

Sound Blocking

After you’ve damped the structural noise, stop airborne noise with a sound blocking layer covering the entire floor and inside the doors. Luxury Liner Pro has a high r-value and STC rating, making it an ideal insulating noise barrier for engine, exhaust, and road noise.

Sound Absorption

Further quiet things down inside your vehicle with sound absorption materials. Mega Zorbe has a high r-value, making it excellent for the car roof, and a high sound absorption coefficient to reduce interior echoes and improve acoustics in door cavities.

Product description

Rust-Oleum Automotive Professional-Grade Rubberized Undercoating Spray provides best-in-class protection for vehicle underbodies against minor road damage as well as rust, water, chemicals and salt. Specialized coating also deadens road noise and resists abrasion. Designed with a comfort spray tip and convenient any-angle spray technology.

From the Manufacturer

Rust-Oleum Professional Undercoating is an easy to use, black rubberized coating. It provides corrosive protection from water, salt and other chemicals. It helps deaden sound and its trusted rust preventive formula provides a barrier from rust on cars, trucks, trailers and other recreational vehicles.

• Perfect for use on bare or primed metal underbodies of cars, trucks, trailers, RVs and more
• Professional-grade formula provides superior protection against corrosion and damage from water, salt and other chemicals
• Dries to the touch in 1 hour and covers up to 10-15 sq. ft. per can
• Undercoating helps deaden sound and reduce damage to parts
• Features a wide, comfort spray tip and any-angle spray technology for easy painting even upside down

User questions & answers

Question:	Would this work well on the inside of toolbox drawers? And is it rubbery
Answer:	I own them in DVD format.
Question:	Can i use this product for a bed liner
Answer:	between 25- 45 minutes.
Question:	how many cans are needed for a standard cab, 6.5 ft bed F
Answer:	Not really.
Question:	How much area will 1 can cover
Answer:	Excellent.

Product features

Rust-Oleum Automotive Undercoatings

While they may not be as visible, vehicle undercarriages, wheel wells and quarter panels deserve top-of-the-line protection. Keep cars, trucks, vans and more performing their best with Rust-Oleum Automotive Undercoating finishes. The rubberized barrier helps prevent damage from everyday wear and elements, as well as helps reduce annoying road noise.

Product description

Boom Mat Spray-On sound deadening is perfect for reducing unwanted road noise and deadening vibrations in those hard to reach places such as trunk interiors, fender wells, undercarriage, body panels, rear quarters and inside door panels to name a few. Boom Mat Spray-On also serves as a thermal barrier insulating against unwanted heat. Whether you are looking for a quiet ride by eliminating squeaks, rattles, vibrations and unwanted engine and road noise, the benefits of Boom Mat Spray-On sound deadening can be used on any vehicle. Boom Mat Spray-On can be applied in multiple layers for even more sound deadening while handling temperatures up to 300 degrees F. Can be applied to non-coated surfaces and can be top coated with paint after only 6 hours of dry time. Boom Mat Spray-On is VOC (Volatile Organic Compounds) compliant in all 50 states. 2-pack. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Reduce unwanted road noise and vibration
• Won't crack or chip
• Helps prevent rust
• Paintable in 6 hours
• Single can will cover approximately 20 sq. ft.

User questions & answers

Question:	If I spray this under the doghouse in my rv, will there be fumes when the engine heats up on the road
Answer:	depends on temperature. this product is combustible so I would not advise spraying it ANYWHERE near high heat or flames
Question:	Would this work for the interior head liner
Answer:	between the head liner and the sheet metal yeas as a sound proof material.
Question:	could you use this on exhaust
Answer:	Exhausts get rather hot so putting this on it would melt, that wouldn't be so good because I bet this is a rather harmful chemical. But you may be able to find something like this that is meant for hot objects.
Question:	Can this be used under the hood of a vehicle for better sound deadening
Answer:	Yes. You need to make sure and clean and prep under the hood before you paint. I used this to do the very same thing, and it worked great

Product description

3M Professional Grade Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. This coating provides one-coat build-up with no dripping, running or sagging. The undercoating is excellent for automotive undercarriages and for other uses including protection for wheel wells, fenders, quarter panels and more.

• Multi-purpose undercoating may be applied to cars, truck and recreational vehicles
• Sound deadening properties help reduce road noise
• Asphalt-based product is excellent for wheel wells, quarter panels, interior fenders, under the hood and more
• Protects the undercarriage of vehicles from rust and abrasion
• Aerosol dispenser allows for easy spray-on application

User questions & answers

Question:	Is this undercoat odorless after it dries
Answer:	Ginger is right. It takes about a week for the smell to go away. Buy outdoors you may not notice it.
Question:	Would this be good to spray on the bottom of a stainless sink for sound insulation and protection or not a good idea
Answer:	Protection against what? It would certainly deaden the sound, though I couldn't say how much. However, I'll warn you, it is a very rough finish, not smooth, and very difficult to remove. So if you plan on using it, tape off your part well, and don't expect it to look pretty.
Question:	How many cans in 3 units
Answer:	Pretty sure that means 3 cans of 16 ounces each.
Question:	Is this stuff tough? Id like to spray my sons plastic wheels with it on his electric Quad/ATV
Answer:	Did you ever spray this on your sons plastic wheels? This is what I was looking at it for and was wondering what your results were if you did spray it.

Product features

3M Professional Grade Rubberized Undercoating

3M Professional Grade Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. This coating provides one-coat build-up with no dripping, running or sagging. The undercoating is excellent for automotive undercarriages and for other uses including protection for wheel wells, fenders, quarter panels and more.

Enjoy a More Pleasant Ride

For a quieter ride, rubberized undercoating helps insulate the vehicle cabin from noise, including from the road and the engine. When soundproofing an automobile, consider the most common source of the noise for your situation. Cars of all makes, models and price ranges will benefit from noise reduction soundproofing.

Exceptional Convenience

The aerosol can offers convenience for applying the undercoating without any additional investment in equipment.

Protect the Underside of Your Vehicle from Corrosion

3M Professional Grade Rubberized Undercoating helps protect the undercarriage of cars, trucks, vans and recreational vehicles from corrosion and abrasion. The coating may also be used to protect wheel wells, quarter panels, interior sides of fenders, the underside of the hood, the bottom sides of floor pans and more. The rubberized undercoating also helps deaden noise, allowing for a more pleasant and quieter ride. The spray goes on as a textured black finish that resists chipping, abrasion, exterior rusting and weathering. It provides one-coat build-up with no dripping, running, or sagging. Protecting your vehicle with an application of rubberized undercoating is advised for long-term protection of the undercarriage. Rubberized undercoating creates a protective barrier that seals out grit, grime and moisture that could otherwise corrode the metal components. This extra protection is a low-cost measure that can pay off by potentially extending the service life of a vehicle.

• The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
• Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
• Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
• Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
• Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 10 sq.feet; Number of sheets in the stack 10 (sheets are folded); Nominal sheet Size 14,5x10 inch. Roller is not included.

User questions & answers

Question:	does the entire floor needs to covered for this to be effective
Answer:	I believe all PC case fans run on 12 volts
Question:	Can headliner be applied on top of this
Answer:	Yrs
Question:	Notice any smell or odor
Answer:	Mine (the 101 model) did *NOT* come with any screws. Fortunately I have a box of loose screws at work...
Question:	Can i use this on a wooden door at home? How many do i need
Answer:	I am not using Cooler Master, but corsair H110 (also 280mm cooler). It fits on the top, except one problem: Water pipe clearance is small and I decided to move DVD drive to external one. If you do not mind bending the water pipe, it fits, but I am not so happy about the fact that water pipe touches the dvd drive.

• ★ Siless VIBRO 50 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
• ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
• ★ Value - SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
• ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
• ★ SILESS VIBRO specifications — Thickness 50 mil, Coverage area 52 sqft, Number of sheets in the box 20, Each sheet size 23.6x15.94 inch. Installation instruction is included in the box.

User questions & answers

Question:	Should you remove any existing insulation that is currently on the underside of the car hood or put this product on top of it
Answer:	Thank you for your question. It is not flame retardant, we would not recommend installing our products close to open flame.
Question:	Is this asphalt based
Answer:	Thank you for your question. It is 15.75 inches or 40 cm wide and 11.48 feet or 3.5 m long.
Question:	Do I need to pair this with any other siless mat in order to achieve good sound deadening
Answer:	Yes, you can use it in the inner panel of the hood.
Question:	Does this kit come with the roller
Answer:	I have the 1/2" gray and 1/2" black...textured 1 side only.

• The cost effective 50 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
• Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed the product that pretty efficiently handles the rattle and reduces noise while being affordable to almost everyone. Kilmat would deaden the entire car for the same money that would be enough to only insulate the doors using the expensive brands material.
• Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.35 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 50 mil thickness material. KILMAT 50 mil is light weighted sound deadening material!
• Car insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
• Sound deadening material specifications: Nominal thickness 50 mil; Total coverage area of 50 sq.feet; Number of sheets in the stack 47; Nominal sheet Size 9.8x15.7 inch. Roller is not included.

User questions & answers

Question:	I want to use it under the headliner of the car. should i use some adhesive to apply this product kilmat to the ceiling? it would go a headlined over
Answer:	Kilmat 50 mil material is self adhesive, there is no need for additional adhesive to be applied to install it to the roof of a car, It's important to clean, dry and degrease a metal surface prior to installation of Kilmat 50 mil to it. Make sure to thoroughly press it down to the metal surface with a roller until the special embossment on the foil is plain and smooth.
Question:	What is R valuer
Answer:	i'm no expert. I would venture to say between 5 and 8 R value
Question:	What's the R value
Answer:	Yeah almost nothing. Found out the hard way. I saw peoole saying it's used for thermal insulation also. Did most of my van with other stuff there rely good but decided to giveth the last 20 percent worth this. And when I step on it like steering in the metal. No difference.
Question:	For application to underside of car hood, should I also use a spray adhesive
Answer:	There should not be a problem adhering Kilmat 50 mil to the underside of the hood without using additional spray adhesive, thus we do not recommend any additional spray adhesives. Make sure to clean and degrease the surface prior to installation.

• ★ SILESS VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
• ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
• ★ Value - SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
• ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
• ★ SILESS VIBRO specifications — Thickness 80 mil, Each sheet size 23.6x15.94 inch. Installation instruction is included in the box.

User questions & answers

Question:	I would like to add to a pelet stove to specific areas to quite down the echos of noises. What is the temp that this material and adhesive can handle
Answer:	Thank you for your question. Siless Sound Deadener 80 mil working temperature range is from -50 to +220 Fahrenheit. For a very short period of time, it would survive at 400-450 degrees Fahrenheit. We recommend sticking to the working range.
Question:	Can this be used on walls in a sound proof room? There is something clanking in the cement wall that I can still hear
Answer:	I Didn’t use for walls but for reducing performance muffler noise inside car. Did a good job. I imagine that it would do as well for a wall. However, you won’t know until you try it, and add more as needed.
Question:	Any idea if these could work putting them under a mattress? Our neighbor AC unit below vibrates super loud in our bed
Answer:	Thank you for your question. Our material is not intended to work under, or around, a mattress. However; If your neighbor insulates his/her air conditioning unit with our material it will work to silence all vibrations radiating from it.
Question:	I have a vw jetta 2010 wagon. i need soundproofing for 4 doors, trunk, floor and wheel wells. how much do I need squirfit
Answer:	Order extra and send back what you don’t need. I used 2 boxes for 4 doors, back wall and part of the floor of a F150

Product description

US Energy Products (AD5) Reflective Foam Insulation, Heat-Cold Shield, Radiant Barrier, Thermal Insulation 48''X10ft (40sqft 1/4 Thick)

• EXTREMELY EFFECTIVE - Reflect 97% of radiant energy, perfect RADIANT BARRIER. R-value up to 15.62 (1 layer), up to 21.10 (2 layers) (building envelope)
• Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail, glue or use a spray adhesive to hold in place! No mess, and no itchy fibers!
• Waterproof, Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents. Non-flammable, flame retardant
• Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round. As well as provides benefits of soundproofing
• Class 1 Class A Fire Rated / Made in USA / Ships from USA / Super Fast Shipping

User questions & answers

Question:	I am looking to use near exhaust heat. What is the temperature rating
Answer:	I don’t know off hand
Question:	what is the best adhesive to apply this product to the steel interior roof of my hotrod? will the sun cause it to release its adhesive ability
Answer:	3M automotive spray contact glue. Available at your local auto paint and body shop supply store. Eastwood tools also has a good spray contact glue product for this type of install as well.
Question:	What color is it
Answer:	White in the middle with a thin layer of shiny foil looking material in both sides.
Question:	Is there any odor with this product? I'm thinking of using as tent insulation
Answer:	I did not observe any odd smells and I am using it as blackouts/heat barrier in my truck camper.

• FINISH CLEANING YOUR VEHICLE IN 15 MINUTES: Our Showroom Shine is a fast and easy way to remove dust, dirt and fingerprints from automotive finishes. Simply spray on and wipe off; no professional guys needed!
• STREAK FREE & SAFE FOR ALL SURFACES: Our Showroom Shine car wax is a superior car protectant that won't leave streaks or residue behind. Cleans and waxes painted surfaces, metal and glass.
• QUICK & CONVENIENT: Our spray wax is a conveniently quick way to give your car the ultimate car paint protection. Simply spray on this car sealant and easily wipe it off for a showroom shine! 
• INTENSE SHINE: This quick and easy spray wax uses advanced science to make your car look amazing! Our car shine spray is easy to apply and works at a nano level to enhance gloss and reflection, giving your car a head-turning, intense shine. 
• MALCO AUTOMOTIVE: Since 1953, Malco Products has provided powerful cleaning and detailing products and accessories to keep cars spotless and clean, inside and out.

User questions & answers

Question:	Is there any expiration date on the container
Answer:	Thank you for your inquiry and interest in Showroom Shine Spray Wax. There is a date code imprinted on the bottle for when the item was manufactured. We recommend using the product within two years of purchase, however, as long as the user shakes the bottle well before using, it should be effective for use beyond that period.
Question:	Does it stain plastic trim
Answer:	I have a 2011 Jetta, I use this spray wax every wash ( no less than 1xevery two weeks) I spray it on a large semidry area, use 2 micro fiber cloths in succession............mirror finish, smooth as a .............. my car is garage kept and so it is in mint condition but no problem on the black plastic trim
Question:	Can this product be applied to all interior surfaces including leather seats? Thanks for your response
Answer:	Showroom Shine is designed to be an exterior detailing product. It has a small amount of wax in it so using it in the interior would make the surfaces very slick and probably a bit sticky. If you're looking for a strictly interior detailer then search for Malco Clean & Shine it's fantastic for all interior surfaces, restores to a satiny gloss.
Question:	Can I just use this to replace waxing with cherry flash wax? What is the difference between this and flash wax
Answer:	Thank you for your interest in Showroom Shine Spray Wax. While Showroom Shine Spray Wax does offer a level of surface protection, Cherry Flash is a paste wax that contains carnauba wax and DuPont Zonyl, and offers long lasting protection from elements that can damage the vehicle's exterior surfaces.

Product features

Paint Correction

Compounds and polishes that remove blemishes, swirls, and scratches from automotive painted finishes and produce a lasting shine.

Paint Protection

Automotive waxes and ceramic coatings that enhance surface shine and add lasting protection from harmful environmental conditions.

Exterior Cleaning & Detailing

Automotive washes, cleaning solutions, and degreasers that remove grime, dirt, bugs, and grease to enhance vehicle appearance.

Interior Cleaners, Conditioners & Protectants

Cleaners and dressings for removing dirt and stains, and condition/protect leather, vinyl, plastic, carpet and upholstery.

Interior & Exterior Dressings

Water-based and solvent-based dressings that add protection and shine to vehicle's interior and exterior leather, vinyl, rubber and plastic surfaces.

Tools & Accessories

Premium microfibers, chamois, brushes, buffing pads and more for vehicle detailing and cleaners that maintain tool performance.

Vehicle Care Kits

All-in-one, specialized automotive detailing kits for maintaining a vehicle's interior and exterior appearance.

Product Catalog

Shop our line of vehicle appearance and care products - available in the Malco Automotive Store.

Product description

💡 This roller has slight grooves on the wheel to prevent sliding or slipping, Corrugated Wheel would leave very slight marring on the material you are trying to roll on, This helps a lot on to tell where you have actually rolled and where you missed an area.





◼ Roller Size 40 x 30 mm, Detail roller 6 x 30 mm



◼ An essential tool for an easy and effective application of your sound deadening mat.



◼ Application of auto sound deadening mats, heat abatement mats, and also wallpaper application.



◼ This seam roller is constructed of a durable polyurethane(PU), The PU material is hard but also with a little softer, most suitable for auto deadening mats application.



◼ Wipe the roller well before use, especially no glue on the face of PU roller.



◼ This application roller allows for even pressure of application, minimizes air bubbles and achieves the best adhesion.

• High quality combo 40mm (1.57" wide) roller with 6mm (0.24" wide) detail roller.
• Roller Size 40 x 30 mm, Detail roller 6 x 30 mm; Total Length: 190 mm. Combo seam roller provides convenience.
• This Corrugated roller has slight grooves on the wheel to prevent sliding or slipping. It allows you to fully apply the adhesion and ensure it’s stuck to the sound deadening material you're trying to insulate without air gaps.
• Widely application for smoothing Vinyl, Film, Wallpaper, Car sound deadening material, Heat insulation mat and more home or car decoration.
• Corrugated Wheel would leave very slight marring on the material you are trying to roll on, This helps a lot on to tell where you have actually rolled and where you missed an area.