12 best tire rack for bumpers

Product description

2007-2018 Jeep Wrangler JK Rear Bumper with Tire Carrier Introduction : Upgrade your 2007-2018 Wrangler for adventurous off-road performance by investing in the Rear Bumper. The heavy duty rear bumper is engineered for functional protection and extreme style. Specification: Color: Textured black. Material: Heavy Duty 3/16" Steel Construction Fitment: 2007 / 2008 / 2009 / 2010 / 2011 / 2012 / 2013 / 2014 / 2015 / 2016 / 2017 / 2018 Jeep Wrangler JK all model. Features: 1. Direct bolt-on replacement of original bumper. No cutting or drilling required. 2. Premium Two Stage Textured Black Powder Coat Finish for corrosion protection and durability. 3. High strength D-ring mounts are robotically welded both inside and outside. 4. D-rings with black isolators included - 9, 500 lbs. each. 5. 2" Standard Hitch Receiver 6. High Quality Bearings at Shaft of Tire Carrier for Smooth Open and Close 7. New Type Upgrade Lock w/ a Double Latch System for a Secure Hold. 8. Accommodate oversized tires up to 37" size with its adjustable mounting positions Package included: 1x JK Rear Bumper with 2" Standard Hitch Receiver2x 18W Nilight LED Pods1x Tire Carrier(In a different box)2x D-Ring --Mounting Brackets & Hardware1x Twin Tapered Bearing Axle1x Tire Carrier Aluminum Handle Note: Please verify that off road Jeep Wrangler JK rear bumper fit your vehicle before you purchase.

• HEAVY-DUTY REAR PROTECTION: - This Bumper was designed to add protection to your precious Jeep’s lower rear end while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style.
• QUALITY TIRE CARRIER : - With the Nilight Tire Carrier you'll experience smooth opening and closing operation because of the twin tapered bearing axle design. This Tire Carrier also features adjustable mounting positions, so it can accommodate Up to a 37" Tire.
• PERFECT FOR OFF-ROAD USE: - Featuring a 2" standard hitch receiver, two high strength D-Ring mounts and a spare tire carrier, the Nilight Rear Bumper w/ Tire Carrier is perfect for off-road use.
• BOLT-ON INSTALLATION : - This Nilight Rear Bumper installs easily. No modifications are required to complete the basic installation process, however, some mechanical experience is helpful.
• BEST SERVICE: - Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us.

User questions & answers

Question:	how do the fog lights hook up
Answer:	You drill a hole where you want it, place the light bracket (comes with your light purchase) over the hole, put a bolt through the hole and bracket, put a washer on the bolt and secure with a nut. You will have to wire to the battery and put a fuse and switch in if you don't already have wires running to your install location.
Question:	Using a small ATV battery as the power source, how long would you think the battery would last
Answer:	I have the light bar on a full size f150 and a 650 cca battery and on accessory only a 3rd of the crees light up. Like it draws waaaaay too much juice or something, so I wouldn't count on it lasting long or cooking the charging system while using it once the battery gives in quietly. Keep it charged and get the biggest amperage you can fit on it
Question:	Does this come with a wiring harness or will I need to buy one
Answer:	You'll need to purchase a wiring harness if you want them on a toggle switch. I spliced them into my reverse lights so I didn't use a wiring harness
Question:	that price is for each item? or both? thank you
Answer:	Price is for two lights.

Product features

Nilight 2007-2018 Jeep Wrangler JK Rear Bumper

Heavy Duty Construction

Manufactured from 3/16" mild steel plating this Rear Bumper is completed in a two stage finish using epoxy precoating and high-grade textured black powder coating for long lasting durability

Spare Tire Carrier

The Nilight Tire Carrier features a swing out spare tire carrier with an adjustable mount making it perfect for tires up to 37". Upgrade Lock w/ a Double Latch System,Opens with the touch of a finger.Closes like a car door. Secure latch, won't pop open unexpectedly.

Double Latch System

New Type Upgrade Lock w/ a Double Latch System for a Secure Hold,easy opening/closing and rattle-free operation.

Twin Tapered Bearing Axle

With the Nilight Tire Carrier you'll experience smooth opening and closing operation because of the twin tapered bearing axle design

Adjustable Mounting Positions

With its adjustable mounting positions this Tire Carrier and Nilight Bumper combo can accommodate oversized tires up to 37" size.

D-Rings & Isolators

Strong D-ring mounts are welded both on the inside and outside. Two 4.75 ton D-ring shackles are included.

Corrosion Resistance Finish

Two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.

Bolt-on Installation

This Rear Bumper bolts on to the factory holes, no additional drilling or cutting required.all mounting hardware and instruction are included.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The 2-Bike RV Bumper Rack provides an easy solution for carrying bikes on the back of an RV. The sturdy rack mounts onto a 4 to 4.5-inch continuous, welded steel bumper and provides a platform where you can stand your bikes. The rack boasts solid steel construction and offers a weight capacity of 30 pounds per bike.

• Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing
• Simple to use and supports various bike sizes, frames and wheels

User questions & answers

Question:	Will this rack interfere with a tow bar, towing our car behind our rv
Answer:	I'm sorry, we have a fifth-wheel and I'm not familiar with the equipment needed to tow a car behind an rv.
Question:	Would it be able to carry 4 bikes of different sizes/shapes (mountain bike type and beach cruiser type
Answer:	When I searched for our bike rack there was a Swagman four bike option available. My husband and I chose the two bike version rather than the four bike.
Question:	Will this fit on the bumper with a spare tire in the middle? I have an older 5th wheel
Answer:	I have a 27' travel trailer. Had the same problem with the fit, so I had to move the spare & mount it on to the frame of the trailer right behind the hitch. Works great.
Question:	can it be when towing a car behind my Rv
Answer:	Hi, I don't tow behind my RV but I mesure from my RV to the second bike handle. It is 34 inches. Hope that help you to decide.

Product features

Carry 1 or 2 bikes easily

Simple and easy to use you will want to take this bumper rack with you on all your road trips. Not for use on aluminum or spot welded bumpers.

Distance from bumper to end of rack: 34". First bike sits 4-3/4" out from bumper.

Simple yet packed with features

• Transports 1 or 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.
• Simple to use and supports various bike sizes, frames and wheels.

Specifically conceived for RV

The Swagman RV bumper rack will safely transport your bikes behind your 5th wheel, RV or camper trailer.

It has been specifically designed to withstand the use with such vehicle.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride.

Product description

POLARIS RZR XP 1000 SPARE TIRE RACK. BOLT PATTERN 4 X 156 FITS ALL RZR XP 1000'S AND RZR XP4 1000'S 2014-2018 ALL POLARIS RZR XP 100 TURBOS AS WELL

• POLARIS RZR XP 1000 SPARE TIRE RACK 4 X 156

User questions & answers

Question:	It comes with lug nuts
Answer:	Yes
Question:	Is this stable enough through trails to stay upright
Answer:	It can, but I preferred laying the bottom part of the tire down on the lower part of the bumper. It stays out of the way of the cargo area that way and then there is no chance of it moving as well.
Question:	Does anyone know how far this sticks out would like to mount it to rear bumper xp
Answer:	Just over a stock front tire's width
Question:	Does anyone know the back spacing
Answer:	WHAT DO YOU MEAN BY BACK SPACING? ARE YOU ASKING WHAT THE MEASUREMENT IS FROM THE BASE OF THE CLAMP TO THE PLATE? ITS 5.75" - tHAT MEASUREMENT IS FROM THE BASE OF THE CLAMP WHERE IT ATTACHES TO THE BUMPER TO THE FLAT PLATE WITH STUDS

• 【FITMENT】Compatible with 2007-2018 JK JKU Rubicon Sahara Sports model.
• 【HEAVY DUTY】This Bumper was designed to add protection to your precious Jeep’s lower rear end while providing it with superior towing capabilities with its heavy-duty D-rings. Adjustable spare tire rack for tires up to 37" and the extra rubber ensures quiet operation. High quality textured powder coat for corrosion protection and durability.
• 【COMPONENTS DESIGN】Made of 3/16" steel sheet and textured black finish, three-layered process offers rust resistance. One-piece design is robotically welded for ultimate durability. And 2" standard hitch receiver; 2 x 4.75 ton D-ring shackles.
• 【ONE-STEP FUNCTION】Rear bezel can be opened without rolling out the tires or loosing any bolts, tire carrier can be adjusted according to your needs.
• 【EASY INSTALLATION】Designed to fit the OEM holes for simple installation with no drilling and modification required. All mounting hardware and instruction included.

User questions & answers

Question:	Will it stop the rattling
Answer:	The rubber stop they sent is effective! so far so good.
Question:	How can I get 4 M12 *35 bolt,the box was damaged when it arrived and the bolts were missing
Answer:	Please contact us by the After-sale mailbox, we will resend the missing bolts to you.
Question:	Is the hitch receiver rating to tow a small off road trailer
Answer:	The hitch and bumper are welded together, the bumper also bolts to both frame rails,so this bumper setup exceeds it.
Question:	I purchased this bumper for my 2007 jeep jk. i had a question about the tire mount. it seems that the tire mount on the back wobbles a lot at the part
Answer:	We have the same issue. We readjusted and retightened the bolts and it hit slightly better.

Product features

Package including:

1 x rear bumper with tire carrier

2 x 4.75 ton D-rings

2" standard hitch receiver

All needed mounting hardware

1 x installation instruction

Product size:

63.47 in x 12.98 in x 26.14 in

Color: textured black

Hitch receiver

2" standard hitch receiver is welded into the rear bumper.

D-rings Shackle

Two solid D-ring shackle mounts which rated up to 9000 lb for increasing strength.

Rear bumper with tire carrier

Adjustable spare tire rack for tires up to 37" up to 37" tire, Rear bezel can be opened without rolling out the tires or loosing any bolts.

Heavy duty construction

Made of 3/16" steel sheet and textured black finish, three-layered process offers rust resistance. One-piece design is robotically welded for ultimate durability.

Quality promise

1. Extra Steel board enhances strength.

2.Rubber reduces noise during operation.

3. 2 x 4.75 ton rated D-ring shackles included.

Unique Design

Designed to fit OEM holes with no drilling or modification required. Our bumper offers one-step functionality. Tire carrier can be adjusted according to your needs.

Product description

EAG 87-06 Wrangler YJ TJ Classic Rear Bumper With Tire Carrier

Product details:

* Cold rolled steel sheet.

* 2" receiver hitch & 2 shackles & adjustable tire mount included.

* Billet aluminum handle for rear tire carrier release included.

* Black powder coat finish.

* Improve your wrangler with EAG classic rear bumper!

Installation:

EAG TJ / YJ rear bumpers are engineered to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward installation.

If you have any issues with our EAG product, please contact us immediately and we will do our best to resolve your issue.

• FITMENT - Fit for 1987-2006 Wrangler TJ YJ.
• ALUMINUM HANDLE - Solid billet aluminum handle with built-in cam lock is used for rear tire carrier release. Adjustable tire mount for rear tire carrier is included.
• HEAVY DUTY CONSTRUCTION - Manufactured from durable 5/32" steel sheet. This off-road rock crawler rear bumper is completed in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability.
• D-RING SHACKLES AND HITCH RECEIVER - The solid D-ring mounts are welded on both inside and outside. Two 4.75 ton D-Ring shackles and black isolators are included. The D-Ring mounts are welded both inside and outside for extra strength. Built-in classIII 2" hitch receiver with safty chain loop.
• INSTALLATION - No cutting and no drilling required. Assured high quality and dependability. Some application may require the license plate to be relocated as the tire carrier swing arm may contact the license plate bracket. The integrated receiver hitch is for recreational use and is not rated for towing.

User questions & answers

Question:	What class is the hitch
Answer:	Class 0. Can't use this to tow with! It doesn't bolt to the frame
Question:	can you buy a jerry can carrier for this rig
Answer:	They make mounts for all accessories and normally they are universal
Question:	What is the weight of the bumper
Answer:	40 lbs give or take
Question:	Does the bumber have the two safety chain hoops on it? I see the description picture shows them, but I read it doesn’t have them
Answer:	There are no chains to hold it. if you need chains they could be added by welding

Product features

EAG 1987-2006 Jeep Wrangler TJ Rear Bumper with Tire Carrier

Need to fit over-sized tires on your Jeep Wrangler TJ/YJ, but confused about what to do with your spare? Stop risking a flat or unsafe driving with an undersized spare, and join the EAG team with our Heavy-Duty Rock Crawler Rear Bumper with an integrated tire carrier. This bumper not only allows you to carry up to a 37” spare but is adjustable for multiple tire widths and types. Perfect for off-road use, you’ll easily master the road with EAG’s bumpers.

D-rings, Isolators, Mounts

Shackle mounts are Robotic-welded onto the bumper from the inside and outside for maximum strength. Included D-rings are ¾” diameter, with a 7/8” diameter pin, and can support up to 9,500 lbs. D-ring isolators are included.

Rattle-free Secure Handles

Our handle system is precision built from high quality components to provided years of rattle free use and a secure tire-swing. All components are purpose built to tight engineering standards to stop catching, grinding, or freezing.

2" Hitch Receiver

Standard size receiver makes an easy attachment point for accessories like cargo carriers, bike racks, and others.

No-Cut / No-Drill Installation

Our Jeep bumpers are designed to attach using OEM attachment points and double checked against multiple test-vehicles to ensure they not only line up but looks great. No modifications are required to your Jeep.

About EAG

EAG was founded by a combination of zealous and knowledgeable 'car guys' in 2010. Concentrating initially on supplying truck grilles, EAG has evolved into a highly sophisticated automotive company dedicated to providing fellow automotive fans the best products at the best prices. This 'best bang for your buck' attitude has enabled EAG to emerge as a major accessory provider in the truck and Jeep marketplace. Not only do we provide products at highly competitive pricing, EAG realizes the importance of responsive service and ensuring high satisfaction so its customers have one of the best purchasing experience possible.

Product description

Put that RV bumper of yours to use and add some fun to your trips with the Bumper-Mounted 2-Bike Rack from Quick Products! The rack features two platforms that easily mount to your 4” to 4.5” square bumper and give you completely customizable control over the width, ensuring that your bike fits perfectly every time. Slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to. Note: Will not fit fat-tire bicycles or bicycles with wheels over 29”. Weight should not exceed 30 lbs. per bicycle. Caution: Before installation, be aware that RV manufacturers may place load restrictions on their vehicle’s bumpers. These load restrictions must be followed to create a safe RVing experience. If you are unaware of your bumper’s load restrictions, please consult your manufacturer for information to ensure safe use. Install only on continuous-weld steel bumpers.

• Conveniently carry up to two bikes from your 4” to 4.5” square bumper
• Adjustable mounting allows a fit for nearly any length bicycle
• All-steel construction, powder coated for corrosion resistance
• 30 lb. weight capacity per bicycle
• Will not fit fat-tire bicycles or bicycles with wheels over 29”
• Slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to.

User questions & answers

Question:	Will this rack hold kayaks as well
Answer:	I would not. You need the support of screws to hold the weight of a bicycle.
Question:	As this mentions, this is basically 2 racks. Are they attached to one another? What is the size of each rack? I want to use them to hold cargo box
Answer:	No, the hook cannot be changed to the other direction.
Question:	What if you had 35 lb on one of the brackets would that be okay
Answer:	Don’t know about that specific weight but I have a large mountain bike that has 29” wheels and it works fine. It comes with 4 screws to attach it to the wall. I attached my screws to the wall stud. I believe that if you do that it should be ok. Hope this helps.
Question:	Can we tow a boat trailer
Answer:	Only one set of wheels, so can set up four trays, I personally did a 4 tray in my bathroom and it’s AWESOME. one tray can be used on its own absolutely.

Product description

The Tusk UTV Rear Bumper/Cargo Rack/Spare Tire Carrier is a perfect addition to your side by side. Designed to be bolted to your machine’s factory roll cage and utilizes existing chassis holes. Installation has been made simple, using common hand tools (outlined in detailed instructions). The heavy duty cargo rack increases storage space and perfect for adventure bags or coolers, when properly secured. The cargo rack’s laser-cut design incorporates multiple locations for nylon strap or bungee hooks. Another important feature is the spare tire mount, providing peace of mind when venturing out on the trail. Even the best of tires can have an occasional flat, so this is a must-have. When you need quality UTV parts and accessories, think Tusk! -Adds a sporty full cage look.

• Tire/Wheel not included.
• Integrated solidly mounted rear bumper to protect your valuable investment.
• Adds an upper rack for more storage.(Rack measures 26 3/4"x16")
• Rugged spare tire holder for those on-the-trail flats.
• Secure frame and cage mounted design.

User questions & answers

Question:	It is compatible with polaris rzr
Answer:	I don't know. Check with tusk. They are great to work with
Question:	will this fit my 2015 1000xp rzr
Answer:	Nope
Question:	will this fit 2020 RZR 900 Trail
Answer:	It fits our 2016...same model. Contact tusk. They are great to work with.
Question:	Will this fit on a 2020 rzr 900 s
Answer:	I believe it will. I had it on a 2019 900 trail. It is a great piece and well worth the money.

Product description

Features:

Type: Radio Control Toy

Scale: 1/10

Material: Alloy

Size: 7.3" x 1.3" x 1"

Color: Black



Description:

1/10 Rc Crawler Alloy Rear Bumper w/ spare tire rack Led lights towbar for Traxxas TRX-4.

This bumper is made of high quality alloy metal, it's durable and easy for customers to install.

It's unassembled, then players can enjoy assembling themselves.



Package Included:

1pcs rear bumper

1pcs spare tire rack

1pcs towbar

2pcs led lights

2pcs mounting posts

some mounting screws

• This metal rear bumper is suitable for 1/10 rc crawler Traxxas TRX-4.
• It protects the car body and chassis very well.
• Mount with the posts.
• Made of high quality alloy metal, durable and easy to install.
• Package Included: 1pcs rear bumper, 1pcs spare tire rack, 1pcs towbar, 2pcs led lights, 2pcs mounting posts and some mounting screws.

User questions & answers

Question:	Will this fit the redcat everest gen7 pro
Answer:	hi we don't know about this car, so we're not sure if this bumper can fit it,
Question:	How do the lenses go in the bumper? Do I have to glue them
Answer:	yes, it needs glue them, *_*
Question:	Is the trailer hitch removable
Answer:	Yes and you can also remove the tire carrier too if desired
Question:	The traxxas trx-4 rear bumper and axial scx10 ii, have to same frame rail distance. will this fit my scx10 ii? it has cylinder mounts
Answer:	Hi our mounting posts are too short to fit the scx10 ii car

Product description

The brand new Smittybilt XRC Atlas front and rear bumpers are the latest and greatest products to come out of Smittybilt. These bumpers have gone through extensive design and testing to meet stringent international pedestrian safety standards. As a result these bumpers are stylishly chiseled as well as being extremely strong and functional.

• Made From 3-16 Cold Rolled Steel
• Welds On Inside And Out
• Marine Grade Steel Hardware
• Textured Matte Black Finish
• 5 Year Limited Warranty

User questions & answers

Question:	I just received this bumper, but the instructions are pretty crappy. any suggestions on some web sites or videos that show the installation process
Answer:	Yes
Question:	Will it swing open with the door easily
Answer:	You would need the large cover for a tire of that size.
Question:	Does it block the license plate
Answer:	what size would i need for tire thats LT235/17/R15
Question:	Does this come with a mount for the spare or do I need to purchase one separately? I don't see it in the picture
Answer:	Measure across the tire and see if it's within manufacturer specifications of the size you order

• NOTE - The rear cargo basket can be ONLY installed on EAG JK rear bumper.
• BASKET DIMENSIONS - L:39.4" x W:17.5" x H:6.7".
• CARGO PROTECTION - Rear cargo basket gives you the ability to pack on luggage, protect your luggage or cargo from most objects.
• HI-LIFT JACK MOUNT DESIGN - High performance Hi-lift Jack mount for Jeep.
• HIGH QUALITY MATERIAL - Manufactured from durable steel sheet. High quality textured powder coat for corrosion protection and durability.

User questions & answers

Question:	What is the width between the poles the hold up the carrier basket up...kib is you see this what size tire is that on the back? i'm running 35's and t
Answer:	I’m running 35 as well fit good
Question:	Is this easy to steal off a vehicle? I’m thinking about using it to secure a small generator on it. How quickly can you take it off
Answer:	Somebody could un bolt it and take it I reckon
Question:	Will this fit the eag tire carrier model "jjktc01+jjkrb011" found here: https://www.amazon.com/gp/product/b07m6rjkqw
Answer:	I would think so
Question:	How big of a spare will it go over
Answer:	It is adjustable with predrilled holes so it can go over a 36 inch tire or maybe even a larger tire.

Product features

Mounts Securely

The rack installs securely to the EAG tire carrier by a steel reinforcement structure and also has mounting points for added accessories. The rack has a maximum total load capacitance of 75 lbs. The cargo is compatible with up to a 37” spare tire.

Straight Foward Installation

The installation is 100% bolt on and requires basic hand tools to assemble.

Application

The rear cargo basket can be ONLY installed on EAG JK rear bumper.

Product description

Specification:

Condition: 100% Brand New

Item Type: RC Rear Bumper

Material: Aluminum Alloy

Color: Black

Quantity: 1pc

Length: Approx. 175mm / 6.9in

Height: Approx. 87mm / 3.4in

Fitment: Fit for Scx10 / D90 1/10 RC car, etc.

Package List:

1 x Bumper2 x Screws

• 【Premium materials】: Made of high-quality aluminum alloy materials, environmentally friendly and practical, reliable and durable, and long service life
• 【CNC processing】: Exquisite craftsmanship, CNC processing to make it durable, polished surface and exquisite appearance, make your remote control car look more attractive
• 【Protection】: The size and shape of the RC bumper is designed to provide comprehensive protection for the RC track. Better improve the overall performance of your model car
• 【Upgrade accessories】: High-quality accessories can be a good replacement for old or broken accessories. It is a great upgrade accessory for your rc car
• 【Easy to install】: lightweight and easy to carry and use, easy to install and remove, it is a great choice for every rc car enthusiast

• Hooke Road Rear Bumper & Tire Carrier Kit Compatible with Jeep Wrangler JK & Unlimited 2007-2018
• Heavy Duty 3/16" Steel and 2" X 0.120" Tubing; 2" Standard Hitch Receiver
• Can Accommodate Up to a 37" Tire; High Strength D-Ring Mounts w/ D-Rings Included
• Two Stage Textured Black Powder Coat Finish; Rock Crawler Rear Bumper (110 lbs) with Tire Carrier (48 lbs),with door open style
• 2 Year Hooke Road Manufacturer's Warranty & Life time customer support

User questions & answers

Question:	Do I need any additional parts? Rubber plugs for factory holes? Anything at all
Answer:	You will need to plug the holes for the tire stand offs
Question:	Does it come with elimination plate
Answer:	Yes.
Question:	Is there any drilling needed or does this attach to the current standard bumper pre-drilled holes on the 2011 Wrangler Sport
Answer:	No drilling is required.
Question:	I love my bumper but it rattles bad. Any suggestions for keeping it from rattling
Answer:	You have to adjust the connections between the tire hanger and the door. The half ball can also be adjusted to make it a little tighter. Real easy to do.

Product features

Why Choose Hooke Road?

The Hooke Road Brand has been certified as a member of SEMA.We are studious and gradually grow up to be a professoinal aftermarket retailer.As a SEMA member, we make, buy, sell and use all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again.Wish you have a terrific off-road experience with our products.

Different Trail Rear Bumper with Tire Carrier for 2007-2018 Jeep Wrangler JK & Unlimited

These bumper are made of heavy duty 3/16" Steel. And two stage texured black powder coat finish.

Rust Resistance

E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the art performance and decorative effects. The bumpers can last for 100 hours during the salt spray test which is equivalently to have a 5-year corrosion capacity.

D-Rings & LED Lights Included

Two D-rings with isolators are included. 2 x 18W rear LED lights included.

Shackle mounts are Robotic-welded onto the bumper from the inside and outside for maximum strength. Include 4.75 ton capacity D-rings are ¾” diameter, with a 7/8” diameter pin, and can support up to 9,500 lbs.

Built-in 2" Hitch Receiver

Spare tire carrier arm swing with tailgate. An adjustable mount making it perfect for tires up to 37". A custom-designed billet aluminum connector securely locks the tire carrier in place so there is no worry of it coming loose on the trail.

Standard size 2 inch hitch receiver makes an easy attachment point for accessories like cargo carriers, bike racks, and others.

Easy Bolt-on Installation

Easy bolt-on install with product instruction and hardware that come with bumpers. No drilling or modifications required to your Jeep.

The Hooke Road Jeep bumpers are designed to attach using OEM attachment points and double checked against multiple test-vehicles to ensure they not only line up but looks great.