11 best bug shields

Product description

Wade Bug Shields provide protection from expensive repairs due to damage from road debris. The one-piece, "off the hood" design, contours to the truck body providing the best hood protection against nicks and flying debris. Digitally engineered design resists flex, flutter, vibration and provides a perfect fit. Customize your truck with quick and easy to install Wade Bug Shields. Design varies by application.

• Helps protect paint and windshield from rock chips
• Strong 1-piece construction
• Manufactured from high-impact acrylic
• Made in the USA

User questions & answers

Question:	Does this fit a 2020 F
Answer:	Platinum Bug Shield #72-96154 fit the 2015-2020 Ford F150 trucks.
Question:	Does this fit a 2019 F
Answer:	I don’t know we ordered for a 2018
Question:	Does it work on F-150 stx
Answer:	Yes
Question:	Does this require removing the weatherstripping under the front of the hood
Answer:	Yes on the side ones. 2016 f-150 Simple to remove side weather strip. Just pull out push in pins

Product features

Wade 72-96154 Smoke Platinum Bug Shield

Platinum Bug Shields provide the protection you need to prevent expensive repairs due to damage from the elements. The 1-piece, "off the hood" design contours to the truck body providing ideal hood protection against nicks and road debris. The Platinum Bug Shields' digitally engineered design resists flex, flutter and vibration while providing the perfect fit for your vehicle. Style varies by application.

• Helps protect paint and windshield from rock chips
• Strong 1-piece construction
• Manufactured from high-impact acrylic
• Will not flex, flutter or vibrate at highway speeds
• No drilling required on most applications

• Manufactured from smoke tinted high-impact acrylic
• Helps protect paint and windshield from rock chips
• Off the hood one piece design
• Will not flex, flutter or vibrate at high speeds

User questions & answers

Question:	Just received my shield, and of the four push pin holes underneath the hood, only two line up ?! The two in the middle are off by at least
Answer:	Hello, I purchased one of each bentgo boxes and they all fit in the lunch bag with about 2 inches in the side to spare. I’m able to fit some smaller items on top, but again not much room to spare. Luckily the drink can go on the side
Question:	can matching for 2018 toyota tacoma
Answer:	hi. It seems to be machine washable. But I will rather hand was it.
Question:	Just installed and looks great. Missing one clip. Will it stay in place with one clip in middle missing? Thanks
Answer:	It’s a neoprene fabric and it already leaked on me when one of my containers failed. I’m not sure how it would work with ice packs.
Question:	Will this fit 2002 Toyota Tacama
Answer:	My daughter's sandwich box is around 6" x 6" with room to spare. I looked up omiebox and it looks like they're 8" x 8" so I think you'd be okay. These bags are great! Hope that helps!

• Extended protection from rocks, mud and road debris
• Stand-away design for easy cleaning and extra protection
• Car-wash safe, scratch resistant, durable and UV stable
• Product type : AUTO ACCESSORY

User questions & answers

Question:	Will this fit 2021 jeep grand cherokee l
Answer:	I'm not sure.
Question:	will it fit a 2011 grand cherokee
Answer:	Try to have theme send you the missing clip. That way it will be installed the right way.
Question:	will this fit a 2019 cherokee limited
Answer:	I looked up a replacement hood for my 2004 toyota tacoma and 2001 = 2004 all use the same hood. buy that 72-97146 bug shield, it'll fit! Billy

Product description

The AVS Bugflector is designed to complement the contours of your vehicle's hood. This custom-molded hood shield is made in the USA and precision-engineered to fit your vehicle perfectly. This hood shield’s low-to-medium profile is aerodynamically efficient, and provides protection from stones and other debris that ricochet near the the hood and windshield. The shield’s durable impact-modified, acrylic material makes this accessory wear-and-tear resistant. Your vehicle’s Bugflector can remain on the hood during a car wash. The accessory can also be easily removed from the hood for simple cleaning and waxing. The Bugflector features a simple installation process that can be completed at home in 10 minutes or less. No driling required. In order to protect the hood paint from rubbing against the shield if hit by debris, the set includes several clear rubber bumpers easily applied to the hood during the installation. The set includes installation instructions and any required hardware.

• Custom-molded hood shield is precision-engineered to fit your vehicle perfectly for a sleek, aerodynamic appearance
• Provides maximum hood and windshield protection
• Off-the-hood design allows for easy cleaning and waxing. Thickness - 0.11
• Durable impact-modified acrylic material in a dark smoke finish
• Proudly made in the USA and backed by a Limited Lifetime Warranty

User questions & answers

Question:	Will this fit my 2020 f
Answer:	The fasteners provided are useless. I went to Ace and bought #12 x 1/2 long sheet metal screws. I used those instead of the plastic fasteners. You have to use caution and not use too long a screw. I stuck a wooden dowel thru the mounting hole until it touched the underside of the hood to measure the distance from the mounting surface to the underside of the hood. I also ground off the point of the sheet metal screw. I pulled the fasteners holding the rubber gasket out and slid the deflector between the gasket and the hood. I then installed the screws thru the rubber gasket and the deflector into the mounting holes. I also reinstalled the factory fasteners to hold the rubber gasket in place. My truck is a 2018 F150 XLT. I think the 2017 should be similar. I would measure the mounting holes to be sure a #12 screw will work. It’s been around a year since I installed mine. I like the look of it and the protection it provides. Any more questions and I would be glad to help.
Question:	Can this item be delivered to my physical address
Answer:	It uses little plastic fasteners. Not anything sturdy. On our '17, F150 it made the rubber hood seal bulge and distorted. It sent the thing back
Question:	The plastic “hardware” that came with the deflector will not securely stay in the factory holes on my 2017 F150. Any suggestions before I return it
Answer:	Yes this will fit
Question:	How does this guard fasten
Answer:	Not recommended for this item. 3M tape is not strong to hold. Unless you want drill holes to damage your hook.

Product features

AVS Bugflector Hood Shield

The AVS Bugflector features a design that complements the contours of your hood to provide hood and windshield protection against elements on the road. This full profile hood shield provides a stylish and sleek appearance and is made of durable material for maximum wear-and-tear resistance. Keep your hood looking showroom new with style and protection against bugs, stones and debris.

Provides hood protection and adds style

Hood shields are designed to provide front end protection against the hazards of the road. Adding a hood shield to your vehicle helps deflect bugs and other objects from hitting the hood, fenders, and windshield. Hood shields also add a distinctive style to your vehicle, with the Bugflector creating a sleek and non-obtrusive designer appearance.

About AVS and Lund International

Lund International is an innovator and industry leader with the most functional, high-performance, protective and stylish automotive aftermarket accessories brands in the industry. The complete product offerings of Lund International fall under four distinct brand names: AMP Research, AVS, Lund and Belmor. With roots dating back to 1935, Auto Ventshade (AVS) is the innovator of the original ventvisor product. Today, AVS is one of the market’s leading automotive accessories brands offering functional and stylish products for trucks, SUV’s, CUV’s and passenger cars.

• AVS hood shields provide a tough defense against bugs, dirt and road debris
• Easy no-drill installation
• Durable impact-modified acrylic material in a dark smoke finish
• Provides deflection to protect hood, fenders, and windshield
• Limited Lifetime
• Fit Type: Vehicle Specific

User questions & answers

Question:	Will this fit 2021 Dodge dually
Answer:	I’m not sure. Our Jeep is a 2014. Looks like the shape of the 2021 is the same to me. Maybe ask the dealer if the inside dimensions of the cargo area has changed at all.
Question:	Will this fit a 2019 ram 3500 lamine
Answer:	My husband said that it will not fit your Jeep. Ours is a 2014. If you look up the part number for the 2011 it should be different than the one for the 2014. He said that the hood design is different on both of the Jeeps.
Question:	has it been wind tunnel tested
Answer:	Our Jeep is a Grand Cherokee. This item would probably not fit the Cherokee.
Question:	Will this fit my 2020 ram 3500 longhorn crew cab dually with an 8' box
Answer:	I initially thought the same thing, but after a closer look you will notice the fasteners and holes that you need to use are underneath the rubber dust seal attached to the front underside of the hood. After you figure that out it will fit perfectly. Also the push pin fasteners fit very tightly I had to use a small hammer to get them to seat fully. You will be very happy with this shield!

• Manufactured from smoke tinted high-impact acrylic
• Helps protect paint and windshield from rock chips
• Off the hood one piece design
• Will not flex, flutter or vibrate at high speeds

User questions & answers

Question:	will this fit an Audi 2015 model series
Answer:	Hello, thanks for reaching out to us! We appreciate your interest in our AVS products. This part will fit the 2019-2021 Ram 2500 and 3500 - including dually.
Question:	This fit a silverado
Answer:	Yes it will fit the 3500 2019-2020
Question:	Just want to confirm. this will fit a 2004 gmc yukon slt v8 thanks
Answer:	So far so good!, it hang inside the truck and not touching the paint on the out side. Meaning, the heat of the sun is not affecting directly the outside of the paint and the plastic. No problem with the wind and brought silicone dots to protect any contact between the plastic and paint.
Question:	does it come with all hardware to mount it
Answer:	I have a 2020 2500 Power Ram and it fit was right on. I do believe the Hoods on both 2500 & 3500 are the same. But would go to a Dealership and compare 1st. However the Plastic push fasteners provided are too short. I used Aluminum Rivets to attach to good.

Product description

Wade Bug Shields provide protection from expensive repairs due to damage from road debris. The one-piece, "off the hood" design, contours to the truck body providing the best hood protection against nicks and flying debris. Digitally engineered design resists flex, flutter, vibration and provides a perfect fit. Customize your truck with quick and easy to install Wade Bug Shields. Design varies by application.

• Helps protect paint and windshield from rock chips
• Strong 1-piece construction
• Manufactured from high-impact acrylic
• Made in the USA
• Fit Type: Vehicle Specific
• Note: Product is only intended for the 1500 Chevrolet Silverado trucks 2016-2018

User questions & answers

Question:	Does it bolt on
Answer:	No this will not fit your vehicle.
Question:	Will this product fit a 2015 Chevy Silverado
Answer:	It will but fit but it doesn't fit very well it's shaped weird on the clip holders
Question:	Will this fit a 2018 Z71 extended cab truck
Answer:	It's a perfect fit for my 02 GMC 2500HD. I believe your 04 YUKON has the same hood but I cannot be certain. Hope this helps.
Question:	How is this attached to the hood
Answer:	There is no hardware needed, only a few self tapping screws.

Product features

About us

Westin designs and delivers automotive products that give you the look and function you need to fit your active lifestyle.

Westin Automotive, Inc. is committed to providing our customers with product and service which meet or exceed their specifications. The necessary tools and resources have been provided to all employees in an effort to keep quality at the highest standard.

Westin Automotive provides design and manufacturing services for Superwinch military products.

• Full height, wrap-around design provides a sleek, aerodynamic appearance
• Effectively protects hood, windshield and fenders from rocks and road debris
• Off-the-hood design allows for easy cleaning and waxing
• Durable impact-modified acrylic material in a dark smoke finish
• Proudly made in the USA and backed by a Limited Lifetime Warranty

User questions & answers

Question:	Has the cheap hardware issue been addressed for this product yet? It seems it is a constant complaint from most all buyers
Answer:	Yes it does but u don't see the bolts
Question:	How does this hold up in automatic car washes
Answer:	No, it will not fit a 2015.
Question:	will this fit on my F450 rv motor home
Answer:	Yes it will. I think it will fit all 2016-2018 Chevy Silverado 1500 trucks since they all have the same body style.
Question:	Are these made in chrome
Answer:	Four screws in existing holes, the screws they sent were too small had to replace with larger ones, but otherwise it works great.

Product description

Auto Ventshade's Bugflector II Hood shield is custom-molded and precision-engineered to fit perfectly, designed to protect and complement the contours of your vehicle's hood. The high-profile, wrap-around design is aerodynamically efficient and provides excellent protection for your hood, windshield and fender, deflecting rocks and other hazardous road debris. Impact-modified acrylic material is wear-and-tear resistant and car wash safe, providing maximum durability. It can also be easily removed from the hood for simple cleaning, and includes all installation instructions and required hardware. This hood shield provides easy installation with no drilling required. In order to protect the hood paint from rubbing, the set includes several rubber bumpers applied to the hood during the installation. Protected by a Limited Lifetime Warranty.

• Full height, wrap-around design provides a sleek, aerodynamic appearance
• Effectively protects hood, windshield and fenders from rocks and road debris
• Off-the-hood design allows for easy cleaning and waxing
• Durable impact-modified acrylic material in a dark smoke finish
• Proudly made in the USA and backed by a Limited Lifetime Warranty

User questions & answers

Question:	Does it fit?? says it fits my 18 ram but only has one picture and it’s a ford escape or explore. ya no thanks. i’ll look for a different brand
Answer:	Thank you for inquiring about Bugflector 25120, this product will fit either a 2018 Ram 2500 or a 2018 Ram 3500.
Question:	I ordered this in a "smoke" tint and it looks brown. i need dark gray tint to match my rain guards. is the dark smoke a gray tint
Answer:	Hi Sue, we only offer smoke in the one color. If you need additional assistance, please do not hesitate to reach out to us at [email protected].
Question:	amazon says this fits a 2019 3500 but there is a different grille style for 2019 will this fit
Answer:	Thank you for inquiring about 25120 Bugflector II, this is designed for the Ram 3500 from 2010 - 2018. I hope this helped.
Question:	do you have or know who has a bug deflector for 05 caddy cts
Answer:	Check with earl Owen in dallas texas

• Custom-molded hood shield is precision-engineered to fit your hood perfectly
• Effectively protects hood, windshield and fenders from rocks and road debris
• Lower profile provides extra protection from mud, sand, dust as well as rocks and other road debris
• Durable impact-modified acrylic material in a dark smoke finish
• Proudly made in the USA and backed by a Limited Lifetime Warranty

User questions & answers

Question:	How tight to the hood is this. On the back side. Can you still get your hand in there to be able to was the hood
Answer:	Have had no problems with that. Seems to hold up fine.
Question:	do you have this in Chrome
Answer:	Thank you for contacting AVS! This item is designed to fit a 2011-2016 F-250/350/450/550 hood. It should work for your vehicle as long as it is within this year range. The hoods for the camper versions of this vehicle should be the same as a regular pickup model. Thanks again and please let us know if you have any further questions!
Question:	Does this deflector cause and issues with closing the hood
Answer:	Hi, thanks for reaching out to us! We appreciate your interest in AVS products. We do have Bugflector that come in Chrome, but would need to know the year, make and model of your vehicle in order to tell if we have one for your vehicle in Chrome.

• Full height, wrap-around design provides a sleek, aerodynamic appearance
• Effectively protects hood, windshield and fenders from rocks and road debris
• Off-the-hood design allows for easy cleaning and waxing
• Durable impact-modified acrylic material in a dark smoke finish
• Proudly made in the USA and backed by a Limited Lifetime Warranty

User questions & answers

Question:	Has anyone noticed any damage from the screw heads on black cover across the radiator when the hood is open from this cover
Answer:	About 1", so no.
Question:	Will this fit a 2008 4Runner
Answer:	NO, black.
Question:	Will this fit a 2014 toyota corolla
Answer:	My deflector cracked eventually because it didn't line up properly with the rubber stops on the underside of the hood.
Question:	Will this fit a 2021 4Runner Limited
Answer:	I’ve had no issues whatsoever and it was installed in 2014.