11 best marine battery terminals

Product description

Schumacher's Coated Marine Terminal Ends are zinc plated and fit 3/8 inch and 5/16 inch posts. It is three times more conductive and includes post washers.

• Zinc plated
• Fit 3/8 inch and 5/16 inch posts
• Includes post washers
• Three times more conductive

User questions & answers

Question:	so would you use 3/8" lugs on the positive bolt and 5/16" lugs on the negative bolt
Answer:	Thank you for your question, Juliet. All of the attachments are composed of a chrome-plated stainless steel.
Question:	what size are the connector bolts
Answer:	Hi Michael, Thank you for your interest in this Black + Decker hand mixer. This hand mixer has a 20% slower first speed than other Black + Decker hand mixers. This allows for better control with less mess. If you need further assistance, I’d be happy to help! Please contact us at [email protected] and reference the screen name used in your question so that we may better assist you.
Question:	how do I connect my car's existing battery cable to these ends? do I have to cut off the old ends and crimp a new terminal, then connect to this
Answer:	Used Ones: You would have to ask each individual seller how often theirs has been used. New Ones: Have never been used.
Question:	What is the size of the screw terminal
Answer:	Yes it will. takes five to ten minutes if egg white are at rroom temperature

Product description

WindyNation batteries terminals are designed to meet the difficult, corrosive conditions of battery connections. Battery acid, moisture, and other solvents often lead to the premature degradation of battery terminals. WindyNation's battery terminals are manufactured from pure brass and utilize stainless steel fasteners. Brass and stainless steel are highly resistant to corrosion from marine environments and battery acid, compared to traditional lead battery terminals with standard steel fasteners. Meets or exceeds MIL SPEC B-12128C and SAE-890.

• Includes 2 positive + 2 negative (2 pairs) of marine grade top of post battery terminals
• True Marine Grade: brass battery terminal and included stainless steel fasteners provide excellent corrosion resistance to battery acid and marine environments.
• Both mounting bolt diameters are 5/16" (8 mm) diameter. See photo gallery for electrical connector options.
• Battery terminals are designed to fit all standard top of post batteries (19mm positive post and 17mm negative post)
• Meets the following specifications: Military B-12128C SAE-890. Superior corrosion resistance and electrical conductivity compared to lead or zinc plate terminals.

User questions & answers

Question:	Is the 1-inch vertical SS bolt and wing nut combination easily removed to replace with a longer bolt
Answer:	His cleaning is very simple. After every use, I rinse with water, and it’s clean after rinsing.
Question:	What is the minimum interior diameter on the post openings when fully cinched down
Answer:	No, the filter Designed to extract juice. There will be no seeds in your juice or salad. This orange manual squeezer also presents a juicer bag, so don’t worry at all
Question:	How many amps can these handle? Semi truck battery bank? 1800 amps? 0/4 awg wire? Can these handle that application? Its a 3 battery bank
Answer:	Thank you for your question. The beaters for our mixers are typically available as replaceable parts. Please visit us at www.ProdProtect.com or contact our Consumer Care Line at 1-800-231-9786, so we can better assist you.
Question:	These are paper thin. Im skeptical they will handle 1100 cranking amps without creating a current bottleneck. What are they rated for
Answer:	Yes. There is an "Eject" button along with two other buttons: 1) level range 0-5 and 2) "Power Boost". Hope this answers your question.

Product description

Schumacher's Marine Terminal Ends are zinc plated and fit 3/8 inch and 5/16 inch posts. It is three times more conductive.

• Zinc plated
• Fit 3/8 inch and 5/16 inch posts
• Three times more conductive

User questions & answers

Question:	Are they copper,,,, Brass or what
Answer:	It is normal for the posts to be different sizes so you don't get them mixed up. I do not have them in front of me to put calipers to, but I do know there is the appropriate size difference as well as them being marked for positive and negative accordingly.
Question:	Is the wing nut on a stud or a through bolt
Answer:	I believe a 02 silverado has side terminals on the battery. These are meant for top post batteries if your battery also has the top posts yes it will work but you may need to switch up your wiring terminals and/or the wiring itself if there's not enough slack to connect to the top post
Question:	Will this fit a jeep grand cherokee
Answer:	If you don't have a crimper you better get one, unless your power wires already have ring terminals on them then you're golden.
Question:	are these a set of two
Answer:	I keep an Optima battery tender on my Wagoneer all through the winter it’s clips are smaller than typical jumper cables and I have had no issues at all clamping to the posts with these installed.

Product features

Schumacher BAF-MT1 Top Post, Marine Terminal, 3/8"-5/16", Pair

• Three times more conductivity
• Zinc-plated
• Fits 3/8 inch and 5/16 inch posts
• Contents: Marine terminal ends

• 3/8" Studs Rated to 440 Amps @ 12 Volts with Momentary 550 Amp Spikes
• Mount in Panels up to 7/16" Thick in a 1-17/64" Hole
• Durable Nylon Backing Nut Eliminates any Question of Shorting and These Can be Mounted in Metal Panels
• Inner Copper Core for High Current Applications
• Use with Fastronix Rubber Terminal Covers 404-110 and 404-111 for a Professional Installation

User questions & answers

Question:	I need 1/4 20 thread, does this system come in that size
Answer:	It will vacuum but requires water; supplied by a pump, as it is an attachment for a water extraction cleaning system. So, the short answer is no. It would be overkill to use only to vacuum. Also most vacuums don't vacuum water. One more thing. If you aren't properly trained to clean upholstery, you may destroy your furniture.
Question:	do you have CAD drawings for these
Answer:	Very nice,the juicer machines is very solid.
Question:	What is the isolation voltage? or,has anyone experience flashover or breakdown issues with 600 vdc? (i want to mount in a shielded enclosure
Answer:	Yes,the manual juicer can be usded for juice celery.
Question:	I am looking for 5/16 or 3/8" thru panel terminals with a voltage rating of 600 vdc and a current rating of 100 amps. do you have such a product
Answer:	Yes, you can squeeze pomegranates. The seeds can be separated from the juice, and the juice is collected at the bottom.

Product features

Durable Nylon Backing Nut

• Forget the trouble of tightening metal backing nuts.
• Tighten with a 1-3/4" wrench.
• Keep your panels scratch free without sacrificing strength.

3/8" Nickel Plated Studs

• Stainless steel terminal nuts for easy installation and removal.
• Rated to 440A Continuous / 550A Momentary
• Internal Copper Core for high current transfer

Index Notch to Prevent Rotation

• Mount in panels up to 1/2" thick

Install two different ways!

• Option 1: Drill 1-1/8" hole and file fit the feed thru to prevent rotation.

• Option 2: Drill 1-1/4" hole and insert feed thru

Universal Application

• Automotive
• Marine
• Solar
• RV/Motorhome
• Off-Road
• Made in the USA

Product description

They work great on reduces possibility of crossing terminals, and saves time at hookup.

Heavy duty Top Post 3 Way Automotive Battery Terminal Connectors Universal Fif for Auto Car Van Boat .



FEATURE:



Being able to isolate the connections is a great feature.



1. Battery Terminal Clamps’ Material: Pure Copper with Tin plated (Screws made of steel )

2. Positive Battery Terminal Hole Dia.:0.71inch (18mm). Negative Battery Terminal Hole Dia.: 0.67inch (17mm).

3. Car Battery Terminals are Suitable for use in most vehicles, fit for most car, boat, van 6V/12V battery.

4. Battery Terminals’ Color: Red cover (Positive) and Black cover (Negative) 

5. The pile head of Battery Terminal Adapter will not break, corrosion resistance, can reduce the voltage distortion

and the current transmission loss.



SPECIFICATIONS:



Material: Pure Copper Plate + Plastic(Cover)

Quantity: 2Pcs

3 Ways Battery Post Terminals with Easy to Install, Durable.



PACKAGE INCLUDED:

1xRed - Positive Battery Terminals

1xBlack-Negative Battery Terminals



How about the Battery Cable Ends Top Post' quality?



Top Post Battery Terminals Made of Copper Plated & with Plastic Cover, Corrosion resistance.

good conductive performance, wiring is convenient, and the connection is firm.

• HIGH QUALITY With 3Ways:-3 Way Positive Negative Battery Terminals with Material: Pure Copper Plate &Plastic.Being able to isolate the connections is a great feature.
• DIEMNSION: Positive Battery Terminal Hole Dia.:0.71inch (18mm). Negative Battery Terminal Hole Dia.: 0.67inch (17mm).
• OUT POWER:- Battery Cable Ends Suitable for 6/12 volt positive or negative battery plates.
• USING AREA:--Battery Terminals Connectors for Car, Van, Caravan, Motorhome, Truck Battery etc.
• EASY DISTINGUISH-2 colors of Battery Terminals to distinguish the positive and negative connectors,Black(-),Red( +)

User questions & answers

Question:	What's the feature of thie 3 way battery terminals connectors
Answer:	I ordered this from fuller brush website
Question:	Do this car battery terminal connectors fit a car batery
Answer:	Yes, this upholstery tool is compatible with the Rug Doctor Mighty Pro, Mighty Pro X3 and Wide Track machines.
Question:	Can this Battery temrinal 3 way can perfect for Multiple cable connection
Answer:	RUGDOCTOR.com
Question:	Are this 3 way battery terminal connectors universal
Answer:	This is the solution hose. Thanks

Product description

Ampper top post brass battery terminals connector clamp for marine car boat Rv vehicles.



Specifications:

1, 1 Pair of sturdiness connectors for increased strength and reduced corrosion.

2, Made of brass, + and - are directly marked on the terminal.

3, Easy To Install, direct fit and no modifications, make it faster and easier for installation.

4, Used for battery extension, parallel connection, and ground connection.

5, Compatible for car, vehicle, Rv and boat, which have a standard top post battery (19 mm cone / tapering positive & 17 mm cone / tapering negative).



Complete kits includes:

1 x positive terminal

1 x negative terminal



100% Satisfaction.

No reason for return or change.



Order it now!

• 1 Pair of sturdiness positive and negative standard top post connectors for increased strength and reduced corrosion.
• Made of brass, + and - are directly marked on the terminal.
• Easy To Install, direct fit and no modifications, make it faster and easier for installation.
• Used for battery extension, parallel connection, and ground connection.
• Compatible for car, vehicle, RV and boat, which have a standard top post battery (19 mm cone / tapering positive & 17 mm cone / tapering negative).

User questions & answers

Question:	what size are the studs
Answer:	look at various Fuller items --they state "with sprayer" if they come with one
Question:	can the stud to contact the battery cable be removed and/or replaced
Answer:	can it be used on ceramic tiles

Product description

Ampper military spec battery terminal top post set for marine car boat Rv and vehicles.



Specifications:

1, 1 pair of military spec connectors for increased strength and reduced corrosion.

2, Positive and negative are directly marked on the terminal.

3, Standard 3/8" diameter bolt for lugs mounting, also includes 5/16" diameter short bolt.

4, Each terminal can hold multiple battery cable.

5, Used for car, vehicle, Rv and boat, which have a standard top post battery.



Complete kits includes:

1 x positive terminal

1 x negative terminal



100% Satisfaction.

No reason for return or change.



Order it now!

• 1 Pair of military spec lead alloy positive and negative standard top post connectors for increased strength and reduced corrosion.
• Standard 3/8" diameter bolt for lugs mounting, also includes 5/16" diameter short bolt.
• Positive and negative are directly marked on the terminal.
• Each lead alloy terminal can hold multiple battery cable.
• Used for car, vehicle, RV and boat, which have a standard top post battery (19 mm tapering positive & 17 mm tapering negative).

User questions & answers

Question:	What is the max amperage these can handle
Answer:	Yes these would be a good repair for your car if in need of new terminals
Question:	Will these grip Trojan 6 volt posts that are about 15mm at top and taper wider at the bottom
Answer:	These suck, don’t waste your time or money
Question:	Is this made of cast lead
Answer:	Based only on my experience as a long time auto tech these terminals can handle about 400 amps for short periods (2-4 seconds) at a time and 200 amps continuous.
Question:	Aren't copper ones the best
Answer:	Good for any normal size sedans.

Product description

Sherco Automotive & Marine Supplies

Part # 12MBT

(10) Marine Top Post Battery Terminal Cable End 5/16 Zinc Wire Clamp with Wing Nut

- Wing Nut Terminals

- Clamp type wing nut terminals convert standard post to marine or other special uses.

- Brass Plated Wing Nut

- Positive Terminal Stud Size is 3/8"

- Material: Lead; zinc plated

- Negative and Universal Terminal Stud size is 5/16"

• Clamp type wing nut terminals convert standard post to marine or other special uses.
• Brass Plated Wing Nut
• Positive Terminal Stud Size is 3/8"
• Negative and Universal Terminal Stud size is 5/16
• Made in USA

Product description

Product description:

Heat Shrink Tubing

Material:PE environmental protection material

Product specifications:Φ1.6~Φ130

Temperature range: -45℃～125℃

Shrinkage temperature:initial shrinkage temperature 80℃,complete shrinkage temperature 125℃

Rated voltage:600V

Product color:black&red

Operating temperature range:257°F (125°C)

Product features: 3:1 high shrinkage ratio,sealing and waterproof,strain buffering,compliance with European RoHS2.0 and other environmental protection requirements.

Tinned Copper Ring Terminal Connectors

Material:T2 low resistivity copper

Surface:salt spray test 48H environmental protection fog tin

Hardness HV:120-70

Pullout test:Conform to UL486 standard

Contact resistance:Conform to UL486 standard

Flammability rating of material:Conform to UL486 standard

Production process:cold pressing

Features:high conductivity contact material

The kit weight:92.5g

The kit size:8*8*3cm

The kit include：

12pcs 6x5/16 Tinned Copper Ring Terminal Connectors

12pcs 3:1 Heat Shrink Tubing

• In this kit,we offer 12pcs 6awg heavy-duty lugs with a 5/16 screw size ring,corresponding matching 3:1 red and black heat shrinkable tube.
• The ring terminal connector made of high-quality copper content of 99.95%,good electrical conductivity,conform to UL486 standard.The 3:1 shrink tube is well made of high quality environmental material,thick and durable.
• The wire lugs connector can be easily crimped or soldered,the heat shrink fit solid or stranded gauge wire,heat shrink provides tight and full seal,prevents leakage of any solder.
• The ring terminal connector application areas:military/aerospace,household appliances,lighting electronics,automotive electronics,new energy,the 3:1 adhesive-lined heat shrinkable tubing black and red,can be applied in industry,environmental protection material.
• If you receive a defective product or have any problems with the product,please feel free to contact us,We will provide you with satisfactory service at any time.

Product description

The battery power post is available in red or black. Useful for customizing vehicles or relocating batteries. 3/8" bolt post molded into a composite insulating base that can be screwed or bolted down.

• Insulated
• 3/8"

User questions & answers

Question:	Are the studs removable
Answer:	Thanks for the question! We don't recommend it on any natural stone. It probably is fine for a quick spray and wipe, but it's not good to let it sit for any length of time.
Question:	what is the screw size, i need 1/4-20 thread
Answer:	refill bottle does not come with sprayer. If you order regular bottle that does not say refill it will have sprayer.
Question:	what are the full dimensions I need to make a cad for this
Answer:	I cannot imagine that it would be effective on mirrors, but it does wonders on soap scum in the bathtub.
Question:	How Long is the post/bolt/stud as I need to attach three cables to it? Thank you in advance for your time and trouble
Answer:	No. You can spray it on after a shower and then the next day when you turn on the water the residue simply rinses of unless it's really built up. But that's the whole point. You can keep your tub and shower cleaner cause it's so easy. You can also spray it on and wait seven or eight minutes and then rinse it off. When i day rinse it off, i mean with a wiping action. If it's very little I just rinse or use my hands or feet or a cloth. If I want to be more thorough I use a Scotch brite scrubby pad with light pressure. I actually did a more thorough cleaning of the tub this morning. Sprayed it last night then started the shower, stepped in and wiped then rinsed in 4 min. It's only slippery while it's being rinsed, then it's gone. It really sparkles after!

Product description

Keep your boats battery at optimal performance with this lead battery terminal replacement. Simple Twin bold design makes these terminals easy to install, no soldering required. Heavy duty lead construction for high performance. The battery terminal is one piece.

• Wing nut design makes replacing your battery terminals quick and easy
• Heavy duty lead material for original equipment performance
• Universal design works with most marine battery posts on 6 and 12 volt batteries
• Instruction included
• Hassle-free installation