13 best high heat spray paint

Product description

Rust-Oleum 248903 Automotive 12-Ounce High Heat 2000 Degree Spray Paint, Flat Black

From the Manufacturer

Rust-Oleum High Heat is a tough protective enamel that renews and protects surfaces subject to heat up to 2000°F (1093°C).

• Gas and oil resistant. Ideal for automotive parts exposed to intermittent temperatures upto 2000°F including exhaust, manifolds headers and more
• Stops rust formula. Rust preventive formula resists oil, gas, grease and environmental elements including rust, salt, humidity and more
• Any-angle spray with comfort tip. Dries to touch in 30 minutes and covers upto 10sqft. For optimal performance allow product to fully cure according to instructions on label
• Durable, long-lasting finish, provides a protective finish that hels items last
• Any-angle spray technology allows the can to be sprayed in any direction, even up side down

User questions & answers

Question:	Can you use this on a wood burning fireplace firebox
Answer:	Yes especially if it is an alloy box but if the box is made of wood you might want to seal and prime it with the high temperature primer first and make sure that there are no cracks before you go over it with the rust oleum high temp paint, for best results!
Question:	Can I use this paint to spray the outside of a wood burning stove
Answer:	I bought 6 cabs and did my gas grill inside and out. After it cured, I ran it for 30 minutes without food. I have a "holder" to grill fish so I am using that for all cooking so I and not cooking directly on the painted area. If after a month it holds up, I will do test cooking on it directly for the stray cats.
Question:	Paint scratches off very easily 2 days later, even after curing at 200 and 400 degrees. Prepped with degreaser and 150 grit sandpaper. What could I have done wrong
Answer:	You did not do anything wrong. This particular paint is not durable at all, but it withstands very very high temps. If you need high heat AND durability, then you need to look into some of the high heat Cerakote and Duracoat products, which are much more involved in applying than this is. I just answered another question on here, and in that answer I mentioned watching YouTube vids of ppl using this paint. In this vids, you'll see they are very delicate w the painted objects after cured when re-installing the object in a car engine compartment, for example. The ONLY thing this paint is good at is withstanding very high heat and being applied relatively easily and cheaply. Ps. I guess I should mention that this product is sometimes sold as an "enamel" but this particular paint is not truly what you'd call an enamel. Enamel implies high durability, and this does not have high durability.
Question:	What temperatures are required to cure the paint multiple times at various temperatures in an oven? Will the final coating survive any contact with food
Answer:	24 hours AFTER painted - place in oven one hour @ 175 degrees. A second curing a few hours later is sometimes helpful.Any contact with food in either direction is bad. (part to food / food to part)Make sure wife is out of town.Cook 2 or 3 pizzas one after another to help disguise smell.

Product features

Rust-Oleum 248903 Automotive 12-Ounce High Heat 2000 Degree Spray Paint

Keep extra-hot exhaust manifolds, headers looking extra sleek with Rust-Oleum Automotive High Heat Spray. This flat, protective enamel bonds to bare metal and withstands intermittent temperatures of up to 2000°F (1093°C).

• Gas & Oil Resistant
• Stops Rust formula
• Any-Angle Spray with Comfort Tip

Product description

Rust-Oleum High Heat Resistant BBQ Finish Spray Paint makes your barbecue grill look like new. Specially formulated to resist heat up to 1000º F. Resists outdoor weathering and provides rust protection.

From the Manufacturer

Rust-Oleum 7778830 High Heat Heat Resistant BBQ Finish Spray Paint, Black Rust-Oleum Specialty High Heat Spray retains color and finish up to 1200º F. Apply to grills, wood-burning stoves, radiators, engines or other metal items. Provides rust protection. Rust-Oleum 7778830 High Heat Heat Resistant BBQ Finish Spray Paint, Black Features: Make your barbecue grill look like new Specially formulated to resist heat up to 1000º F Resists outdoor weathering rosol Black.

• Rust-Oleum Specialty High Heat Spray retains color and finish up to 1200º F.
• Apply to grills, wood-burning stoves, radiators, engines or other metal items
• Provides rust protection.
• Durable, corrosion-resistaint
• Do not use in areas directly exposed to flames (e.g., inside of grills or fireplaces).

User questions & answers

Question:	can I use it to paint my kitchen stove or what product would you recommend
Answer:	All of Yimobra bathroom mats come with a 10-Year No Questions Asked Warranty. If you are at all unsatisfied with your product, please contact us (through Amazon if past the standard return window) and we will be happy to assist you. At the end of the day we want our customers to be happy!
Question:	Could i spray this directly on the grill burners (not the holes of course) and the brackets that hold the burners to the fire box
Answer:	PVC is quite harmful. Here's an online quote,"Studies of animals show that some of these chemicals are may cause cancer, kidney and reproductive system damage. The disturbing part is that soft PVC is often used in toys for young children – and they just love putting things in their mouths." I would not use this mat for children.
Question:	Do you think I could spray my oven racks with this? Would it scratch off at the bottom
Answer:	Thanks for your question. Actually, this bathtub mat non toxic is made of PVC, maybe some customers have some misunderstand of PVC tub mat, but as a professional bath mat expert, Yimobra, who is in this field for many years, we have never, and will never send any harmful products to our dear customers. In addition, we also have rubber bathtub mats, it is pvc free.
Question:	no lead
Answer:	The mat suction cups will collect hair over time, so you'll want to flip it over and rinse / clean it off from time to time. I wouldn't expect immediate cleaning to be necessary. Much of this will depend on your own tolerance for cleanliness. I'll keep you informed as to my future experience. Hope this helps. I actually have two of these, neither of these two bath tubs get much traffic, primarily for guests.

Product description

ULTRA HIGH HEAT is a superior rust-preventive enamel that provides deep color, rich sheen and the best protection for high heat surfaces. This durable semi-gloss finish gives metal surfaces a premium look along with excellent gloss and color retention after repeated heating. It withstands temperatures of up to 1200 degrees (648C). Ideal for barbeque grills, wood stoves, radiators, firepits, fireplace screens, automotive parts and more.

From the Manufacturer

Rust-Oleum 241169 12-Ounce High Heat Ultra Spray Paint, Black Rust-Oleum 241169 12-Ounce High Heat Ultra Spray Paint, Black Features: Spray paint Superior rust preventative enamel Protection for high heat surfaces Withstands temperatures up to 1200°F Ideal for barbeque grills, wood stoves, radiators, fire pits, fireplace screens, automotive parts and more Durable semi gloss finish Indoor or outdoor use Black 12-Ounce.

• Indoor/outdoor
• Rich, semi-gloss sheen
• Superior color and sheen retention after repeated heating
• Do not use in areas directly exposed to flames (e.g., inside of grills or fireplaces)
• 12 oz. Spray

User questions & answers

Question:	For prepping a fire pit do you apply to the outside only or interior, log grate, etc
Answer:	I applied to the outside and inside but not the mesh cover or the log grate.
Question:	can this be used on kitchen appliances? (fridge, stove, dishwasher
Answer:	I'm sure it can be used on stove because by it's an high heat be tolerance spray
Question:	Would you use this on a new fire pit to help it last or only once a fire pit starts to deteriorate
Answer:	You could use it either way. before deterioration might be best, in my opinion. I don't know if that paint layer would peel quicker, though.Good luck!
Question:	Can this be used on the inside lid of my grill which has become very rusted (after sanding of course
Answer:	I would NEVER put paint n the inside of a grill. I have been grilling and smoking eat for 35 years. For the outside it's OK but never paint the inside. Get a round wire brush for your drill and brush it clean. Coat the inside of your grill with Canola oil. Oil and season it by cranking up the heat with no food. Let it get to a very high temp for at least 45 minutes to an hour for a proper seasoning. Then you will be ready to cook. Cleaning of the hood is not really required of a smoker or grill. Best of luck. Smoke rolling here today. 6 racks of baby backs, 2 pork buttts and 20 chicken quarters. I love it.

Product features

Rust-Oleum Ultra High Heat Enamel Spray Paint

Rust-Oleum Ultra High Heat Enamel Spray Paint is specially formulated to renew and protect metal surfaces subject to extreme heat. Tough finish is durable and corrosion resistant. Dries in just 30 minutes for quick project completion.

Available in 3 colors; Black, Copper, and Silver

Clean & Sand Surface

Tape

Spray BBQ Coating

Protects Metal Surfaces up to 1200°F

Suitable for Interior/Exterior Use.

Retains Excellent Color Retention

Satin finish is maintained after repeated heating.

Before

After

Maintain Grill to Extend Life

Product description

BBQ and Stove paint keeps your grill looking new longer. Withstands temperatures up to 1200degreesF intermittently; up to 600degreesF continuously. Durable finish with Thermo-Guard protection. For BBQ grills and wood-burning stoves Dry to touch in 15 minutes Dry to handle in 1 hour For use with metal

From the Manufacturer

BBQ & Stove paint keeps your grill looking new longer and designed to withstand high heats.

• Color: High Heat Black
• Chemical compound: Toluene, Ethylbenzene, Xylene, 1-Butanol
• Dries to the touch in minutes
• Withstands temperatures up to 1200°F intermittently; up to 600°F continuously. Durable finish with Thermo-Guard protection
• Dries tack-free in 15 minutes or less. Resists runs and drips

User questions & answers

Question:	what is the finish? Flat, glossy
Answer:	Okay, according to the listing, this spray paint is supposed to be ''Satin Black''. I read somewhere that ''Cap Indicates Color'' But if you go down to the ''Reviews'' check out the 1st ''Top Review from the United States where it says shows ''Krylon Satin Black.'' Look at the photo's. That's what Satin Black looks like. I needed some Engine De-Greaser, Wd-40 & so on, plus I looked at a can of Krylon's ''Satin Black'' Spray Paint. Now it was way easier to see the difference between since at the Auto Parts Supply Store by me, they had Gloss, Satin & Flat. (Prices were the same.) On Amazon's site, I can't tell the difference. My advice if you're looking to see what Satin looks like, compared to Flat, go down to the ''Reviews''. Check out the review from ''AM7''. This person spray painted the Framing on the Glass Doors''. That's what a Satin Black looks like. The cans are supposed to say, ''Cap Indicates Color'' but it doesn't mention it. ***Note: You can't ship this product back. because it's Flammable. Don't ask me why, I was going to ship mine back in the same box so whatever... So with that said, always try & find a review that has pictures. This Satin Finish will look good for what I plan on doing. I've already prepped the surface, so as long as I don't try to get my project completed with coat, after I apply the 2nd coat, it should look great. ***Note 2: I used some ''800 Grit'' to sand off the rust spots and the rest of the old finish. I did that so you couldn't see that it had those rust spots, plus I wanted a good bond to take hold. In order to do that, you will need, (or should) to use either that ''800 Grit'' ''Wet/Dry Sand Paper'', or some ''0-Steel Wool. I also have 0000 Steel Wool. With the 0000 steel wool (also known as) 4-OT Steel Wool, it will take the original finish down to a smooth surface & your new spray paint will bond to that surface. Just remember to use a damp cloth to wipe off the particles from the sanding, or use like Windex. I plan on doing 2-3 light coats. I know from past experiences, I tend to screw up the paint job whenever I do thick-heavy coats. I also let it dry for at least an hour. 2 to 3 hours if you want each coat to dry & cure properly... I certainly hope that my comment helps out. Prepping the surface, then cleaning it along with light coats is ''KEY''. Dan
Question:	is this good to paint my heater metal cover, its pealing
Answer:	Yes , after you remove the pealing paint, spray on.
Question:	Can I spray on the interior of an old charcoal grill that I'm trying to fix up
Answer:	I needed to do the same with my old grill. Inside the top the old paint was flakening off. After scraping I sprayed on with the Krylon. The problem was that additional flakening continued to occur and hence more flaks falling on the food. Maybe if you took the grill top off and sanded it completely then all would be okay in using the Krylon.
Question:	COLOR
Answer:	It's a flat black. I used it on my fireplace insert and it dried looking like cast iron. Very nice.

Product description

Kyron High Heat provides high heat projects with the high-quality protection they need, stands up to high temperatures and protects against rust.

From the Manufacturer

Krylon High Heat provides high heat projects with the high-quality protection they need, stands up to high temperatures and protects against rust.

• Maximum color and finish protection
• Withstands temperatures up to 1200Degree F intermittently; up to 600Degree F continuously
• Premium rust resistance
• Dries in 10 minutes or less
• For use on grills, BBQs, fire pits, wood-burning stoves and heating radiators

User questions & answers

Question:	Can it be used on stove grates
Answer:	I used it on slate which is also not textured and it looks good. What’s nice is you can always add more white and wipe it off. I think it would look nice on flat brick as well. Double check their site and what others have to say though. Best of luck on your project!
Question:	Will this work for tail pipes
Answer:	Yes you absolutely can! This product is designed to be used on a porous stone surface and will provide fantastic coverage.
Question:	Why is the price of paint at almost 30$ a can when the same exact can is less than 8$ at homedepot talk about ripping people off
Answer:	Even though this is for "brick", I dont see why you couldn't. Make sure the surface is free of debris and oils. Thr stone is naturally pourus and should be able to 'soak' up the paint. I would however not recommend it be placed on floor surfaces as it will likely come back up over time and fade from traffic. But on a fireplace and or hearth it shouldn't be a problem.
Question:	Will this work on wood? I have a wooden fire pit lid for my in ground fire pit, I want to spray this on my wooden lid
Answer:	Barely any. I broomed and used a damp sponge to wipe dust away. Then I let it dry before I started to use the product. I LOVED this product.

Product features

High Heat Max

Krylon High Heat Max delivers a durable finish that can stand up to high temperature swings with maximum corrosion protection to make your paint job last.

• 10 minutes or less

• After 1 hour

• Metal

Features:

• Provides maximum color and rust protection. Withstands temperatures up to 1200° F intermittently and 600° F continuously.
• Maximum rust resistance
• For use on grills, BBQs, firepits, fireplace screens and even wood-burning stoves and heating radiators
• Not for use on cooking surfaces

Product description

Rustoleum Automotive 249410 12 Oz Engine Primer Spray Paint, Gray Features: 12 oz spray paint Resists heat up to 500°F Perfect for using on automotive engines and other automotive surfaces Specifically formulated to prevent and stop rust Any angle spray comfort tip Gray

From the Manufacturer

Rust-Oleum High Heat Primer bonds to bare metal and helps create a smooth top coat finish.

• High heat primer spray paint is designed for use on metal surfaces such as automotive engines, mufflers and more
• Oil based paint with Stops Rust formula provides rust resistant base coat for cars, trucks and other vehicles
• Covers up to 12 sq ft, dries to the touch in 30 minutes and can be topcoated in 1 hour
• Spray paint offers outstanding heat resistance for metal surfaces up to 2000°F
• Flat finish can be covered with any topcoat with superior adhesion
• Specially formulated to prevent rust and is recommended for use on automotive engines and other metal surfaces which reach intermittent temperatures up to 2000°F (1093°C).
• Ideal for mufflers, head pipes and engine blocks

User questions & answers

Question:	Does this contain zinc to work as a good primer for aluminum
Answer:	Not sure this answers your question but I can tell you from experience that this stuff really works. I used it on my aluminum engine top side and it's been 2yrs and my engine paint still look new to date.
Question:	How high of temp can it sustain? says intermittent up to 2000°f. kinda ambiguous. can it do 1600f for 1hour
Answer:	i used this product on my 4 pistion calipers and tested them at my campus garage, i tested it under constant and heavy braking, it withstood temps up too 1989F. The red paint i used has been on there for 3 years and i still havent had to touch up the paint
Question:	Can I paint now and put the parts aside, then do the curing process later, after my engine is back in service
Answer:	do a light paint now, let it dry then paint again for better results.
Question:	Can I paint my pots and pans with this? Re-doing kitchen and would like to not have to buy all new pots and pans
Answer:	Only if you want to poison yourself

Product features

Rust-Oleum 249340 Automotive High Heat Primer Spray Paint

Rust-Oleum High Heat Primer bonds to bare metal and helps create a smooth top coat finish. It is specially formulated to prevent rust and is recommended for use on automotive engines and other metal surfaces which reach intermittent temperatures up to 2000°F (1093°C).

• Stops Rust formula
• Any-Angle Spray with Comfort Tip

Product description

Rust-Oleum High Heat Enamel Spray Paint is formulated for use on surfaces that reach intermittent heat of up to 2000 degrees Fahrenheit. Protective enamel creates a durable coating that dries fast for quick completion. Convenient any angle spray technology with unique comfort spray tip reduces finger fatigue while painting.

From the Manufacturer

Rust-Oleum High Heat is a tough protective enamel that renews and protects surfaces subject to heat up to 2000°F (1093°C).

• Ideal for use on automotive parts and surfaces subject to intermittent high heat up to 2000°F
• Tough enamel features Stops Rust formula to prevent corrosion and rust with ultimate protection
• Dries to touch in 30 minutes, covers up to 10 sq. ft. per can
• Durable, long lasting coating protects against grease, oil, gas, salt, rust, humidity and other solvents
• Creates a smooth, flat protective finish to renew the look of your car or truck

User questions & answers

Question:	Can you use in dryer
Answer:	No, it doesn’t have mitten cuffs
Question:	Will this work on wood
Answer:	Don’t order them
Question:	Would this work on a welding helmet
Answer:	The fleece version of these pj's work a little better for the winter, especially with a onesie underneath if it gets too chilly. We use these cotton ones for the summer or the colder mornings when our little guy is romping around.
Question:	Is there any reason this paint wouldn't work to cover the frame of a small adult road bike? (After first applying a primer
Answer:	Don't know. Probably China

Product features

Rust-Oleum 248908 Automotive Rust Preventive High Heat Spray Paint, 12 Oz Aerosol Can, Flat Red

Keep extra-hot exhaust manifolds, headers looking extra sleek with Rust-Oleum Automotive High Heat Spray. This flat, protective enamel bonds to bare metal and withstands intermittent temperatures of up to 2000°F (1093°C).

• Resists heat up to 2000°F
• Gas & Oil Resistant
• Stops Rust formula
• Any-Angle Spray with Comfort Tip
• Use with Rust-Oleum High Heat Primer Spray

Product description

Rust-Oleum High Heat is a tough protective enamel that renews and protects surfaces subject to heat up to 2000-Degree F (1093-Degree C). This rust-preventive formula is ideal for automotive parts and more.

• Resists heat up to 2000-Degree F
• Gas and oil resistant
• Stops Rust formula
• Any-angle spray with comfort tip
• Resists oil, gas, grease, rust, salt, humidity and solvents

User questions & answers

Question:	One review says it must be "baked". how long at what temp? thank you
Answer:	Warm or hot weather temperature during the daylight is fine. Not recommended in the cold / rainy weather day, the moisture in the air will settle on the pure metal & paint contact. Bake is the professional automotive body painters, to get rid of moisture in the metal's pour, better metal & paint contact. Best judgement, or YouTube it. Be safe, have fun.
Question:	Can this be used to spray brake parts such as rotors
Answer:	Use Rust-Oleum® Caliper Paint for brake parts including rotors.
Question:	How glossy it is
Answer:	The Amazon listing shows "Rust-Oleum Automotive 260771 11-Ounce 2000 Degrees High Heat Spray, Gloss Clear", however, it also says MATTE???? So which is it, glossy or matte?
Question:	I do folk art painting on enamel on steel tea kettles. Can I use this on my kettles to protect the enamel paint from the heat from stove use
Answer:	Rust-oleum will hold up but I wold have major concerns for the paint underneath the Rust-oleum, which would deteriorate quickly under the heat.

Product features

Rust-Oleum Automotive 260771 11-Ounce 2000 Degrees High Heat Spray

Keep extra-hot exhaust manifolds, headers looking extra sleek with Rust-Oleum Automotive High Heat Spray. This flat, protective enamel bonds to bare metal and withstands intermittent temperatures of up to 2000°F (1093°C).

• Resists heat up to 2000°F
• Gas & Oil Resistant
• Stops Rust formula
• Any-Angle Spray with Comfort Tip

For Best Results

Use with Rust-Oleum High Heat Primer Spray.

Product description

High Temp Aerosol Paint Stove Bright High Temperature Paint is the industry's premier high temperature paint. It is formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperatures up to 1200°F (650°C). Stove Bright High Temperature Paint is designed for rapid curing and great working properties over ferrous metal surfaces. It is ideal for wood, pellet, and gas stoves as well as stove pipes, engines, engine manifolds, and many other metal substrates that are subject to high temperatures. Available in a wide range of colors to suit almost any need, and comes in both easy to use aerosol and brush-on formulas to accommodate any project. Silicone formula retains color with extended exposure to 1200°F High quality,fast drying formula resists scratching Used by the leading stove manufacturers as their factory finish. Available in 12oz aerosols.

• Click mouse on above images to select color.
• Always a good idea to use Paint Prep prior to painting. ASIN B06XK847PB
• NOTE: Paint is shipped as a hazardous material and shipping could be longer than normal - up to 2 weeks
• Picture is reference only, paint is sold in single cans/colors each
• Paint chart colors may vary according to your screen resolution. If you are needing a precise color match, please request a hard copy of the paint chart.

User questions & answers

Question:	Can this paint be used on galvanized steel
Answer:	First, ask your sister if she usually is 'petite'. I too have this exact problem as I have short legs (28" inseam, rather than a 31" or 30") even though my body is long. So secondly, ask pajama Gram what their inseam measurement is because that varies by company. If she is 30" or less, I would order a petite-large. Better to have a comfortable fit for sleep rather than one that binds. I love my PajamaGrams!
Question:	Are any of these paints textured
Answer:	It hits your hips-the picture is very accurate, the top will fall to your wrists when arms are straight. I absolutely love these jammies 👍
Question:	Can this be used to paint the brick inside the fireplace where the logs go
Answer:	For me the length was just right. I am 5 foot tall.
Question:	Can this paint be used to paint a metal Coleman two burner camp stove
Answer:	Yes. We used them in the summer, they are very lightweight but still warm at night. I would use them for any season! They're my favorite jammies for my son.

Product description

12 oz, red, caliper paint, a durable coating that allows you to customize your car or trucks brake calipers, drums, rotors & springs, formulated to resist brake dust & high temperatures that can be produced from harsh braking conditions.

• The product is 12oz red caliper paint
• Elegant design and smooth finish
• The product is manufactured in United states
• Resists heat up to 900-Degree F
• Formulated to resist brake dust and high temperatures that can be produced from harsh braking conditions
• Any angle spray technology
• Stops Rust formula

User questions & answers

Question:	Do you need to apply primer before using this, and if so which kind
Answer:	No primer is needed, but the surface should be clean and free of the usual dirt, rust, oil, etc. A sand-blasted surface is ideal, but not really needed. DO keep in mind that brake fluid will destroy this paint just any like other paint, so expect some peeling around the bleeder. I wrap teflon tape around the threaded portion ONLY of the bleeder screws to reduce leaks of both air and fluid here.
Question:	Anyone have experience using this on aluminum rear dif cover
Answer:	we used it for brake calipers, my mechanic said something about spraying like plastic and some engine parts, I would say clean the aluminum real well and give it a shot it handles heat and sprays on metal, don't know if calipers are aluminum but might be
Question:	Can I use this to spray the back of a brake pad
Answer:	You can use any paint to paint the back of a brake pad...BUT...do not do it. Question answered. C'MON
Question:	Do you need to heat cure this paint
Answer:	No. Just make sure the surface to be painted is clean.

Product features

Rust-Oleum Automotive 251591 12-Ounce Caliper Paint Spray

Rust-Oleum Caliper Paint is a durable coating that allows you to customize your car or truck's brake calipers, drums, rotors and springs. Caliper Paint is formulated to resist brake dust and high temperatures that can be produced from harsh braking conditions.

• Resists Heat up to 900º
• Brake Dust Resistant
• Any-Angle Spray

For Best Results

Clean calipers with Rust-Oleum Caliper Cleaner prior to painting.

Product description

Rustoleum Automotive 248932 12 Oz Engine Enamel Spray Paint, Gloss Black (6 Pack) Rustoleum Automotive 248932 12 Oz Engine Enamel Spray Paint, Gloss Black (6 Pack) Features: 12 oz. engine spray paint Creates a smooth finish and is formulated for use on automotive engines and other automotive surfaces which reach intermittent temperatures up to 500°F Gas and oil resistant Stops Rust formula Any angle spray with comfort tip Gloss Black

From the Manufacturer

Rust-Oleum Engine Enamel creates a smooth finish and is formulated for use on automotive engines and other automotive surfaces which reach intermittent temperatures up to 500°F (260°C).

• The product is 12OZ Black GLS Eng. Enamel
• Elegant design and Smooth finish
• The product is manufactured in United States
• Durable, long-lasting finish
• Resists oil, gas, grease, rust, salt, humidity and solvents
• Available in industry standard colours
• Comfort-tip spray nozzle

User questions & answers

Question:	Does the clear enamel have a gloss to it
Answer:	Yes for hgheat engine clear it has a nice clear when the directions are followed
Question:	how well would this product work painting my car dis brake calipers
Answer:	I think this paint would work good on the calipers, clean them real good and get the free of rust, and then put a primer on them. This paint works great on a lot projects. It is a little slow drying, but seems to very durable.
Question:	Does this have to heat up in order to cure? or can it be sprayed and then withstand up to 500' temps?using inside headlight housing:projector retrofit
Answer:	You will need to let the paint fully cure before heating for the best durability, subjecting the paint to heat before it cures can lead to bubbling and/or flaking.
Question:	Can this product be used on an electric range? I have intentions of painting our stove but the products for that don't come in high gloss as this does
Answer:	Rustoleum makes a product called "Appliance Epoxy." I've used it for years on everything from the side of a refrigerator to race car parts. It dries to a rock hard shiny finish and is practically indestructible. That's going to be what you'll need.

Product description

VHT SP451 Anodized Blue Anodized Color Coat Paint allows DIYers to create an anodized look under their hoods. The unique transparent coating creates an anodized effect over properly prepared chrome, shiny bare metal and faux chrome-like surfaces for a spectacular metallic finish. VHT Anodized color coat is formulated for high temperature and high performance engine paint applications. It withstands intermittent temperatures up to 550 degrees Fahrenheit. To create the anodized metal look over non metal and or painted surfaces first prime with VHT anodized base coat. Then apply VHT anodized color coat when dry. VHT provides a multi-high performance coating system for the ultimate protection and quality. The system includes a recommended adhesion promoter, paint and clear coat. Dries to the touch in 30 minutes, thoroughly overnight. Does not require curing. Follow all steps outlined on each can for best results.

• Dries to the touch in 30 minutes
• Dries thoroughly overnight
• No curing required
• Provides a multi-high performance coating system
• This item is not for sale in Catalina Island

User questions & answers

Question:	Can you use this for ovens
Answer:	on outside sure / very low quality paint - I wouldn't buy it again
Question:	painting headers and exhaust can this paint hold up? And what prepping will I need
Answer:	I doubt very much this would hold up on headers - other post-cat exhaust components? Maybe - certainly tips.
Question:	Do I have to wet-sand the base coat or wet sand after this is applied
Answer:	No. Do them at the same time. I had great results. Do light coats a cpl minutes apart for base. Then go straight in and do the purple. The purple is hard to get perfect so take your time. Mine turned out great
Question:	how many square feet does a can cover
Answer:	One can did 2 coats of a BBQ grill cover roughly 9sf with plenty left over

Product features

VHT Anodized Color Coat

This unique transparent coating creates an anodized effect over properly prepared chrome, shiny bare metal and faux chrome-like surfaces for a spectacular metallic finish. VHT Anodized Color Coat is formulated for high temperature and high-performance engine paint applications. It withstands intermittent temperatures up to 550°F (228°C).

To create the anodized metal look over non-metal and/or painted surfaces, first prime with VHT Anodized Base Coat. Then apply VHT Anodized Color Coat when dry.

Product description

VHT Flame Proof Coating SP106 Flat Silver is the color coat for the three part multi high performance coating system. VHT Flame Proof Coating will extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT Flameproof Coating will withstand temperatures up to 2000 degrees Fahrenheit (1093 degrees Celsius) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed. VHT provides a multi high performance coating system for the ultimate protection and quality. The system of primer, paint and clear coat finish is applied with a curing process to insure top performance. VHT Flameproof coating only attains its unique properties after correct curing. Curing can be done on the vehicle or off the vehicle by using the following steps. ON the vehicle, paint must be completely dry, run engine at idle for 10 minutes, cool for 20 minutes, run at idle for 20 minutes, cool for 20 minutes, run at normal operating conditions for 30 minutes. OFF the vehicle, paint must be completely dry before curing, heat to 250 degrees for 30 minutes, cool for 30 minutes, heat to 400 degrees for 30 minutes, cool for 30 minutes, heat to 650 degrees for 30 minutes. (CAUTION: Do not exceed the temperature of the least heat tolerant component or the base metal.) Complete application and curing instructions are also printed on every can.

• Flame proof coating extends life of high heat surfaces
• Matte finish ceramic silicone base widely used on automotive exhaust
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 2000 degrees when cured properly
• This item is not for sale in Catalina Island

User questions & answers

Question:	Will this adhere to chrome motorcycle exhaust pipes
Answer:	NO they are not! Vertical stripes/lemon are thicker and 95% rayon 5% spandex. Horizontal stripes are stretchier, thinner material and 55% cotton, 30% polyester, 5% spandex.
Question:	For inside tubing on exaust manifold, is primer application sufficient for protection without , color, VHT paint coatings
Answer:	I would get your normal size. Runs true to size. If in doubt I always size up as I don't like my pj's tight. Hope this helps!
Question:	Can I use this on a firepit to prevent rust
Answer:	All of my son’s clothing, and items need to be labeled for kindergarten. We use Avery brand no iron labels, and a sharpie. You can put them right onto the fabric inside the clothing. They hold up through the wash just fine. Walmart sells them.
Question:	can this be used for arts and crafts to and not just cars
Answer:	Yes they have a draw string. My wife is very pleased and good for snuggling.